Advances in Natural Gas: Formation, Processing, and Applications. Volume 7: Natural Gas Products and Uses
- 1 Edición - 17 de abril de 2024
- Última edición
- Editores: Mohammad Reza Rahimpour, Mohammad Amin Makarem, Maryam Meshksar
- Idioma: Inglés
Advances in Natural Gas: Formation, Processing, and Applications is a comprehensive eight-volume set of books that discusses in detail the theoretical basics and practical… Leer más
Descripción
Descripción
Advances in Natural Gas: Formation, Processing, and Applications is a comprehensive eight-volume set of books that discusses in detail the theoretical basics and practical methods of various aspects of natural gas from exploration and extraction, to synthesizing, processing and purifying, producing valuable chemicals and energy. The volumes introduce transportation and storage challenges as well as hydrates formation, extraction, and prevention.
Volume 7 titled Natural Gas Products and Uses comprehensively discusses natural gas conversion and applications for producing high-value chemicals and energy which are accompanied with related economic analysis. The book covers various methods for producing valuable materials such as synthesis and fuel gases, alkanes, aromatics, sulphurs, etc. and introduces power and electricity generation as well as heat production from natural gas and their applications on future energy systems.
Puntos claves
Puntos claves
- Introduces various chemicals produced from natural gas
- Describes power and energy generation methods from natural gas
- Discusses cogeneration, trigeneration, and other techniques for effective integration of natural gas production with energy systems
De interès para
De interès para
Researchers in academia, students and professors in chemical engineering, oil and gas engineering, and mechanical engineering
Índice
Índice
Section 1. Natural Gas Conversion and Applications
1. Introduction to high value chemicals and energy production from natural gas
2. Economic assessments and cost analysis of natural gas utilization as an energy production source
3. Case studies on natural gas conversion units
4. Disasters in natural gas conversion units
5. Natural gas conversion using plasma technology
Section 2. Natural Gas to Products
6. Syngas production from natural gas by reforming process: dry, steam, partial oxidation, autothermal, etc.
7. Syngas production from CO2-rich natural gas via dry reforming
8. Fuel gas production from natural gas
9. Direct conversion of natural gas to methanol
10. Ethane extraction from natural gas
11. Propane and heavier hydrocarbon production from natural gas
12. Conversion of methane to aromatics
13. Sulfur recovery from natural gas
14. CS2 production from methane reforming with H2S
15. Bio-natural gas conversion to products
16. Natural gas conversion to value-added hydrocarbons via halomethanes
Section 3. Energy Production from Natural Gas and other Applications
17. Power and electricity generation from natural gas
18. Heat production from natural gas
19. Cogeneration and trigeneration applications of natural gas
20. Modern nanomaterials for future and efficient ANG adsorption/desorption in automotive application
Detalles del producto
Detalles del producto
- Edición: 1
- Última edición
- Publicado: 17 de abril de 2024
- Idioma: Inglés
Sobre los editores
Sobre los editores
MR
Mohammad Reza Rahimpour
Prof. Mohammad Reza Rahimpour is a Professor of Chemical Engineering at Shiraz University, Iran, with extensive experience in chemical process engineering, energy systems, process intensification, and sustainable technologies. His research interests include hydrogen and fuel processing, catalytic processes, separation and membrane technologies, carbon capture and utilization, and the development of energy-efficient processes. His work also encompasses the application of advanced process technologies and emerging approaches to improve environmental performance and resource efficiency. Prof. Rahimpour has authored numerous peer-reviewed publications and has extensive experience in academic research, scientific leadership, and the development of international reference works in chemical engineering, energy, and sustainable technologies.
MM
Mohammad Amin Makarem
Dr. Mohammad Amin Makarem is an Adjunct Lecturer at the School of Engineering, Taylor’s University, Malaysia. He holds a PhD in Chemical Engineering from Shiraz University, Iran. His research covers gas separation and purification, green energy, nanofluids, microfluidics, and catalyst synthesis. Beyond research, he has extensive experience as an editor and contributor to academic publishing, serving as Editor or Co-editor for many books, book series, and major reference works from leading academic publishers. His editorial work spans topics such as carbon capture and storage, bioenergy, greenhouse gases, hydrotreating, oily wastewater, chemical industry crises, hydrogen and methanol energy production, homogeneous catalysis, synthesis gas, natural gas, and renewable energy systems. He recently served as series editor for Advances in Biotechnology: Methods, Applications, and Case Studies and has reviewed manuscripts for prominent international journals, helping guide researchers and industry through high-impact resources.
MM