Saltar al contenido principal
Elsevier

Piezoelectric Actuators: Vector Control Method

Basic, Modeling and Mechatronic Design of Ultrasonic Devices

  • 1 Edición - 18 de abril de 2019
  • Última edición
  • Autores: Frederic Giraud, Christophe Giraud-Audine
  • Idioma: Inglés

Piezoelectric Actuators: Vector Control Method: Base, Modeling and Mechatronic Design of Ultrasonic Devices guides researchers and engineers through the process of implement… Leer más

Descripción

Piezoelectric Actuators: Vector Control Method: Base, Modeling and Mechatronic Design of Ultrasonic Devices guides researchers and engineers through the process of implementing the vector control method (VCM) in their systems. The book presents which measurements can be made, how to visualize a variable as a rotating vector, about the angular position of the rotating reference frame, how to calculate the parameters of the controllers, and how to observe key variables. Additionally, the book focuses on the modeling of PE ultrasonic transducers and investigates the energy conversion process in an ultrasonic transducer.

Puntos claves

  • Presents the fundamentals of the VCM at a basic level for researchers and practitioners who are new to the field
  • Simulates several MATLAB and Simulink examples for deeper learning of the subject
  • Presents the application to several test cases, with actual measurements obtained on experimental test benches
  • Describes practical implementations of the method

De interès para

Academia and Industry in the fields of: electrical engineering, acoustics, mechanical engineering, robotics

Índice

1. Introduction

1.1. What is a piezoelectric actuator?

1.2. Applications

1.3. Variability of the operating point of piezoelectric actuators

1.4. Control of piezoelectric actuators

2. Dynamicmodeling of piezoelectric media

2.1. Introduction

2.2. Notations

2.3. Elements of elasticity

2.4. Dynamic equation of an elastic body

2.5. Dynamic of piezoelectric bodies

2.6. Practical considerations

3. Modeling in a rotating reference frame

3.1. Causal modeling of a piezoelectric transducer

3.2. Introduction to the rotating reference frame

3.3. Modeling in the rotating reference frame

3.4. Modeling a traveling wave in a linear beam

4. Control in the rotating reference frame

4.1. Introduction

4.2. Control schemes

4.3. Controller design

4.4. Observers

5. Applications

5.1. Introduction

5.2. Control of a Langevin transducer

5.3. Control of a traveling wave in a finite beam

5.4. Control of a traveling wave ultrasonic motor

6. Practical implementation

6.1. Introduction

6.2. Embedding VCM into a microcontroller

6.3. Vibration sensor, amplifier and calibration

6.4. Simplification for Vq = 0 and a switching converter


Detalles del producto

  • Edición: 1
  • Última edición
  • Publicado: 23 de mayo de 2019
  • Idioma: Inglés

Sobre los autores

FG

Frederic Giraud

FREDERIC GIRAUD is associate Professor at University of Lille and a member of the L2EP (Laboratory of Electrical Engineering and Power Electronics). He’s teaching design of Mechatronic systems, with a focus on the electromagnetic actuators, the power electronics, the control theory, and the smart structures / smart material. His field of research deals with the modeling and the control of piezoelectric actuators in general. He developed the concept of the vector control for the position control of Traveling Wave Ultrasonic Motors, and extended it to Ultrasonic transducers in order to achieve high performances with vibrating devices. He is also a specialist in haptic devices. He develops new surfaces than can change how a user perceives them. He pioneered the “ultrasonic tactile surfaces” based on the ultrasonic vibration of a glass substrate, optimizing their design, improving their power efficiency, developing their control, and evaluating their performances through psychophysical studies. This research has lead to two new companies. He holds 4 patents, he authored and co-authored more than 60 papers in journal and conferences, and 2 book chapters. He’s working with industrial partners through research contracts and projects, and has been involved in more than 6 national/international research projects (two as research leader) two of them are European projects.
Afiliaciones y experiencia
Associate Professor, University Lille, Villeneuve-d'Ascq, Lille, France

CG

Christophe Giraud-Audine

Christophe Giraud-Audine received a Mechanical Engineering degree from the Ecole Nationale Supérieure d'Arts et Métiers in 1993, a Master Degree in Electrical Engineering in 1994 and a PhD in Electrical Engineering from the Polytechnical Institute of Toulouse with honours in 1998. He worked for two years at the Electrical Machines and Drive Group at the University of Sheffield until 2001.He is currently associate professor at the Ecole Nationale Supérieure d'Arts et Métiers in Lille where he teaches Electrical Engineering and Mechatronic. He was involved in European projects in collaboration with aeronautics and automotive companies for the developement of sensors and actuators using smart materials. His field of research since 2011 is the modelling and control of mechatronic devices involving piezoelectric actuators for friction reduction, energy harvesting and active tools for forging processes. He is the authors/co-authors of more than 40 papers and one patent one these subjects.
Afiliaciones y experiencia
Associate professor, Ecole Nationale Supérieure d'Arts et Métiers in Lille, France

Ver libro en ScienceDirect

Lee Piezoelectric Actuators: Vector Control Method en ScienceDirect