Strength of Metals and Alloys (ICSMA 6)

Contents of Volume 1

Fundamentals of Strengthening Mechanisms

Temperature and Strain Rate Dependence of the Flow Stress of Fatigued Niobium Single Crystals

Fundamental Plastic Behaviors in High-Purity BCC Metals (Nb, Mo and Fe)

The Effect of Solute Clusters on Screw Dislocations in BCC Alloys

The Effect of Non-Glide Stress on the Peierls Stress in BCC Metals

A Mechanism for Slip Transfer Across High Angle Grain Boundaries

A Strain Hardening Law for FCC and BCC Crystals Derived from Latent Hardening and Multislip Tests

Multislip in FCC and BCC Crystals: A Theoretical Approach Compared with Experimental Data

The Behavior of Dislocations Near a Free Surface

Cross-Slip and Work Hardening

Low Temperature Plasticity of Molybdenum Single Crystals of High Purity

Creep of LiF Crystals in the Temperature Range 1.6 - 300 K

Understandings of Slip Behaviors In BCC Metals by Computer Analyses

The Strength of Polycrystals

A New Way to Derive Activation Enthalpies of Serrated Flow?

On the High Temperature Internal Friction Background

Dislocation Motion in FCC Metal Crystals

Moving Dislocations in Aluminum and in Aluminum-Copper Alloys

Stoneley Waves at Grain Boundaries in Copper and Aluminum

Alloy Design For Strength

(A) Ferrous Alloys

Void Damage in Dual Phase Steels During Plastic Deformation

The Effect of Inclusions on the Structure and Properties of HSLA Steel Weld Metals

Micromechanical Concepts for the Deformation and Fracture Behavior of Coarse Ferrite-Martensite Steels

Transformation Behavior and Mechanical Properties of Rapidly Quenched Steels

Microstructure and Fatigue Behavior of Nickel-Base Eutectic Composites

Thermomechanical Treatment of a Plain Low Carbon Steel

Property - Structure Relations in Quenched and Tempered 2%Mn Steel

A Study of the Effect of Low Temperatures on the Strength and Ductility of Commercial HSLA Steels

Internal Friction Measurements, Hardness and Tensile Tests During the Tempering of 1100°C as Quenched 17% Chromium Steels

Precision Measurements of Pre-Yield Microstrain in Amorphous Alloys

A Thermodynamic Model to Predict the Precipitation Behavior of Both Titanium Nitride and Sulfide During Steel Solidification. Effects of the Globularisation of the Sulfides on the Isotropy of the Mechanical Properties

The Contribution of Cobalt to the Tempering Resistance and Hot Hardness of Tool Steels and Cobalt Replacement

Effects of Co, Mo and Ti Contents on Age-Hardening in 15%Ni Maraging Steels

Dynamic Strain Aging of Cast Iron

Athermal, Stress and Strain Induced Transformation Strengthening in Multiphase Stainless Steels

Comparison of the Efficiency of Various Rolling Schedules to Obtain Dual-Phase Steel Plates

The Influence of Plate Gauge on the Strength and Impact Properties of Steels

Deformation Behavior of Austenite-Ferrite Structures

The Influence of Cementite Content and Cementite Shape on the Bauschinger Effect of Plain Carbon Steels

Ferrite Grain Refinement in HSLA Steels

Control of Strain Age Hardening in Ti Bearing Hot Rolled Strip Steels

Coated Sheet Steel Viewed as a Composite Material

(B) Non-Ferrous Alloys

Designing of an Optimum Aluminum Alloy for De-Salination Applications

Effect of Microstructure on the Mechanical Properties of Transage 134

The Tensile Deformation of Aluminum Foil

Effect of the Phase Transformation on the Mechanical Properties of Initially Cold-Worked Cobalt and Cobalt Alloys

Mechanical Properties During the Tempering of Martensitic CopperAluminum Alloys

The Influence of Post-Extrusion Thermomechanical Treatments on the Tensile Properties of Zr-2.5 wt% Nb Alloy

Strengthening Mechanisms in Dispersion Hardened Copper Polycrystals

Deformation Behavior of the Ordering Alloy Cu2Nizn

Analysis of Strengthening Factors in Thermomechanical Treatment of an Al-Cu-Mg-Mn Alloy

Dispersion Strengthened Titanium Alloys by Rapid Solidification Processing

Alloy Softening in Molybdenum-Carbon Single Crystals

Solution Hardening of FCC Alloys by the Chemical Interaction Between Solute Atoms and a Dislocation

An Investigation of Mechanical Thermal Treated Al-Al3Ni Eutectic Alloy

The Flow Stress-Grain Size Relationship in a Precipitation-Hardening Al Alloy

(C) Ceramics and Glasses

The Hardening Reaction in Dental Amalgam

Strengthening of Alumina by Heat Treatment

The Shear Band Deformation Process in Metallic Glasses

Metal Glass Composites as Engineering Materials

Strength/Ductility-Microstructure Relationships in Two-Phase Materials

Yield, Flow and Strength of Polycrystalline Material

Origin of the Recrystallization Texture In Rolled Low Zinc Brass

Yield of Mild Steel at Very High Strain Rates

Luders Band Fronts in Mild Steel

Microstructures and Deformation Mechanisms in Polycrystalline Aluminum

Yield Points in Micro-Alloyed Titanium Steels

Heterogeneous Formation of Slip Bands in Neutron-Irradiated Copper Crystals

Plastic Instability In An Al-Mg-Si Alloy

Substructure Strengthening of Cold Rolled Aluminum Alloys

On the Nature of the Bauschinger Effect in Copper and Copper Aluminum

The Effect of Strain Rate and Geometry on Development of Microstructure During the Forming of an Aluminum-Magnesium Alloy

Analysis of Local Plastic Heterogeneities by Use of the Kossel Technique

Control of the Anisotropy of Mechanical Properties in Steel Plate

Role of Internal Stress for the Initial Yielding of Dual-Phase Steels

Tensile Deformation of a Fine-Grained Al-Alloy

The Effect of Penetrator Geometry on the Deformation of Ductile Metal Targets

High Strain and High Strain Rate Processes

Cyclic Cracking and Plastic Flow in Metal Cutting Under Built-Up-Edge Conditions

Plastic Stress-Strain Relationships of Some Polycrystalline Metals Tested in Biaxial Tension to High Strain

The Effect of a Dispersed Phase Upon the Deformation Structure of Rolled Copper Crystals

The Tensile Properties of Cold Twisted Steel Bars

Effect of Manganese on the Dynamic Recrystallization Behavior of Titanium-Bearing Microalloyed Steels

Dynamic Recovery and Recrystallization in a Duplex Stainless Steel

The Significance of High Strain Deformation in Machining

Dynamic Recrystallization of Copper Observed by SEM Channeling Contrast

Microstructure and Texture of Rolled CPH Metals

Dynamic Recrystallization in Ferritic Stainless Steel

Microstructure and Mechanical Properties of Heavily Deformed Copper

Microstructure and Texture of Heavily Deformed Copper

"Microbands" in Cold Worked Metals

Substructural Size Effect in Metal Cutting

Formability of Ni-Fe Alloy Sheets

Contents of Volume 2

High Temperature Processes, Creep, Fatigue, Superplasticity

Experimental Analysis of the Relationship Between Dip Test Techniques and the Plastic Equation of State

Biaxial Dip Tests Measurements of Internal Stresses During High Temperature Plastic Flow

Verification of a Microstructurally-Based Equation for Elevatedtemperature Transient Isotropic Hardening

The Interpretation of the Scaling Relationship Shown by the Log σ - Log ∈ Creep and Stress-Relaxation Curves

Stress and Microstructure Dependence of the Creep Resistance of Mo-5% W Alloy

Stress Rupture Behavior of Copper-Chromium Weather Resistant Steels

Multiple Strengthening in Creep of Wrought Ni-Cr-Base Superalloys

Anomalous and Constant Substructure Creep Transients in Pure Aluminum

Creep Rupture Properties of a Niobium Bearing Pressure Vessel Steel Containing Small Amounts of Molybdenum

Inhomogeneous Deformation of Some Aluminum Alloys at Elevated Temperature

Creep and Fatigue Interactions in a Nickel-Base Superalloy

The Influence of Grain Size on Elevated Temperature Deformation Behavior of a Type 316 Stainless Steel

Development of Creep Resistant Magnesium Rare Earth Alloys

The Influence of Traces of Sb and Zr on Creep and Creep Fracture of Ni-20% Cr

The Effect of Pre-Aging on the Creep Behavior of Type 321 Stainless Steel

High Temperature Creep and Fatigue Of Cu-Cr Alloys

High Temperature Intergranular Fracture Enhanced by Grain Boundary Migration in Alpha Iron-Tin Alloy

Small Angle Neutron Scattering Study of Creep Deformation and Fracture of Type 304 Stainless Steel

Cyclic Deformation of Superplastic Zinc-Aluminum Alloys

A Metallographic Study of Cavitation During Superplastic Deformation of CDA 638 Alloy

The Role of Grain Boundary Dislocations in Superplastic Flow

Mechanisms for the Low-Stress Regime I of Superplasticity

Strain Effect on Stress-Strain Rate Relations of Superplastic IN744 Steel

Elevated Temperature Deformation and Fracture of Ingot and Powder Processed Aluminum Alloys

Anelasticity in Superplastic Metals

Enhanced Superplasticity in Modified Ti-6%Al-4%V Alloys

Strength of Rocks and Minerals

Deformation Mechanisms In Dunite - The Results of High Temperature Testing

Measurements of Strain Rate Continuity in LiF Crystals

The Deformation of Polycrystalline Sodium Nitrate (Calcite Structure)

Recovery and Recrystallization in Olivine

Deformation of Olivine, and the Application to Lunar and Planetary Interiors

Strength Related to Fracture - Fracture Toughness

Factors Influencing the Fracture Toughness of High Strength Aluminum Alloys

Fracture Toughness and Critical Crack Length Parameters in Fatigue Failure

The Bauschinger Effect

The Influence Of The Addition of Boron on the Grain-Boundary Segregation of Phosphorus and Fracture Behavior of Medium-Carbon Ultra-High Strength Steel

The Effects of Thermomechanical Treatment on the Notch Toughness of a 4340 Ni-Cr-Mo Alloy Steel

The Crack-Tip Ductility of Structural Steels

Deformation and Fracture Behavior of Single Fibre Coated with Ductile or Brittle Layer

A Comparison of Spall Fractures with Fractures in Tensile Tests

Cyclic Deformation

Low Amplitude Fatigue of Copper Crystals at Room Temperature

Back Stress Variation Along the Hysteresis Loop

Fatigue Crack Initiation on Slip Bands

Detection of Crack Propagation in Fatigue with Acoustic Emission

Fatigue Crack Growth in the Near-Threshold Region

Fatigue Behavior of Nitrided Steel

Corrosion Fatigue of Sic/Al Metal Matrix Composites in Salt Ladened Moist Air

The Effect of Overloads on Fatigue Crack Propagation in Offshore Structural Steels

The Influence of Dispersoids on the Low Cycle Fatigue Properties Of Al-Mg-Si Alloys

The Effects of Frequency and Hold Times on Fatigue Crack Propagation Rates in a Nickel Base Superalloy

Fatigue Crack Propagation Characterization of 18-8 Austenitic Stainless Steel Under Repeated Impact Loading

The Fatigue Studies of Steel with Bainitic Structure

High Temperature Fatigue of an Austenitic Stainless Steel

Dislocation Structures In Fatigued Cu Polycrystals

Influence of Cyclic Stress On Substructure in Aluminum and Iron

Influence of Overloads on the Subsequent Crack Growth of a Fatigue Crack in a E 36 Steel

The Effect of Strain Rate in Air and Vacuum on the High-Temperature Lowcycle Fatigue Behavior of Cast IN100 Alloy

Fatigue of Spinodally Decomposing Alloys

Papers Received Late or Delayed By Revision

The Work Hardening of Copper-Aluminum Alloys

A Model for Plane Strain Ductile Fracture Toughness

In Situ Plastic Deformation of Metals and Alloys in the 200 kV Electron Microscope

Control of Discontinuous Yielding by Temper Rolling

Deformation Mechanisms, Microstructure Development and Grain Orientation in Rolled Copper-Alloys

The Constancy of Density of Deformation Energy at Macro- and Microlevels in Case of Automodelle Elastic-Plastic Behavior of Materials

The Coarsening of Precipitates

Fabrication of a Cu-Al Composite Wire and its Mechanical Properties (Part 1)

Fracture Toughness of Soft Soldering Composite Laminates Made from 4340 Steel in High Vacuum Atmosphere

The Calculations of Weight Functions for Certain Configurations

Influence of Microarea Chemical Composition and Microstructure on Fracture Properties of a Medium Carbon Ultrahigh Strength Steel