Saltar al contenido principal

Libros en Energía y Potencia

  • Low Salinity and Engineered Water Injection for Sandstone and Carbonate Reservoirs

    • 1 Edición
    • Emad Walid Al Shalabi + 1 más
    • Inglés
    Low Salinity and Engineered Water Injection for Sandstone and Carbonate Reservoirs provides a first of its kind review of the low salinity and engineered water injection (LSWI/EWI) techniques for today’s more complex enhanced oil recovery methods. Reservoir engineers today are challenged in the design and physical mechanisms behind low salinity injection projects, and to date, the research is currently only located in numerous journal locations. This reference helps readers overcome these challenging issues with explanations on models, experiments, mechanism analysis, and field applications involved in low salinity and engineered water. Covering significant laboratory, numerical, and field studies, lessons learned are also highlighted along with key areas for future research in this fast-growing area of the oil and gas industry. After an introduction to its techniques, the initial chapters review the main experimental findings and explore the mechanisms behind the impact of LSWI/EWI on oil recovery. The book then moves on to the critical area of modeling and simulation, discusses the geochemistry of LSWI/EWI processes, and applications of LSWI/EWI techniques in the field, including the authors’ own recommendations based on their extensive experience. It is an essential reference for professional reservoir and field engineers, researchers and students working on LSWI/EWI and seeking to apply these methods for increased oil recovery.
  • Renewable Energy Forecasting

    From Models to Applications
    • 1 Edición
    • Georges Kariniotakis
    • Inglés
    Renewable Energy Forecasting: From Models to Applications provides an overview of the state-of-the-art of renewable energy forecasting technology and its applications. After an introduction to the principles of meteorology and renewable energy generation, groups of chapters address forecasting models, very short-term forecasting, forecasting of extremes, and longer term forecasting. The final part of the book focuses on important applications of forecasting for power system management and in energy markets. Due to shrinking fossil fuel reserves and concerns about climate change, renewable energy holds an increasing share of the energy mix. Solar, wind, wave, and hydro energy are dependent on highly variable weather conditions, so their increased penetration will lead to strong fluctuations in the power injected into the electricity grid, which needs to be managed. Reliable, high quality forecasts of renewable power generation are therefore essential for the smooth integration of large amounts of solar, wind, wave, and hydropower into the grid as well as for the profitability and effectiveness of such renewable energy projects.
  • Microalgae-Based Biofuels and Bioproducts

    From Feedstock Cultivation to End-Products
    • 1 Edición
    • Raul Muñoz + 1 más
    • Inglés
    Microalgae-Based Biofuels and Bioproducts: From Feedstock Cultivation to End Products compiles contributions from authors from different areas and backgrounds who explore the cultivation and utilization of microalgae biomass for sustainable fuels and chemicals. With a strong focus in emerging industrial and large scale applications, the book summarizes the new achievements in recent years in this field by critically evaluating developments in the field of algal biotechnology, whilst taking into account sustainability issues and techno-economic parameters. It includes information on microalgae cultivation, harvesting, and conversion processes for the production of liquid and gaseous biofuels, such as biogas, bioethanol, biodiesel and biohydrogen. Microalgae biorefinery and biotechnology applications, including for pharmaceuticals, its use as food and feed, and value added bioproducts are also covered. This book’s comprehensive scope makes it an ideal reference for both early stage and consolidated researchers, engineers and graduate students in the algal field, especially in energy, chemical and environmental engineering, biotechnology, biology and agriculture.
  • Advances and Innovations in Nuclear Decommissioning

    • 1 Edición
    • Michele Laraia
    • Inglés
    Advances and Innovations in Nuclear Decommissioning is an essential resource for industry professionals and academics interested in acquiring the most up-to-date information on the current state of nuclear decommissioning. Written and edited by the world’s leading experts, this book considers lessons learned and new innovations in the field. Edited by Dr. Laraia, it is the perfect companion to his 2012 book, Nuclear Decommissioning, which critically reviews the nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities. Where the earlier book covers the basics of decommissioning, this new book brings you up-to-date with new areas of interest and approaches, innovative technologies, and lessons learned by both the nuclear and non-nuclear decommissioning sectors.
  • Electrical Power Systems

    • 1 Edición
    • P.S.R. Murty
    • Inglés
    Electrical Power Systems provides comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies it is more important than ever to understand the fundamentals that underpin electrical power systems. The book includes a large number of worked examples, and questions with answers, and emphasizes design aspects of some key electrical components like cables and breakers. The book is designed to be used as reference, review, or self-study for practitioners and consultants, or for students from related engineering disciplines that need to learn more about electrical power systems.
  • Trends in Oil and Gas Corrosion Research and Technologies

    Production and Transmission
    • 1 Edición
    • A. M. El-Sherik
    • Inglés
    Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission delivers the most up-to-date and highly multidisciplinary reference available to identify emerging developments, fundamental mechanisms and the technologies necessary in one unified source. Starting with a brief explanation on corrosion management that also addresses today’s most challenging issues for oil and gas production and transmission operations, the book dives into the latest advances in microbiology-influen... corrosion and other corrosion threats, such as stress corrosion cracking and hydrogen damage just to name a few. In addition, it covers testing and monitoring techniques, such as molecular microbiology and online monitoring for surface and subsurface facilities, mitigation tools, including coatings, nano-packaged biocides, modeling and prediction, cathodic protection and new steels and non-metallics. Rounding out with an extensive glossary and list of abbreviations, the book equips upstream and midstream corrosion professionals in the oil and gas industry with the most advanced collection of topics and solutions to responsibly help solve today’s oil and gas corrosion challenges.
  • Power Systems Analysis

    • 2 Edición
    • P.S.R. Murty
    • Inglés
    Power Systems Analysis, Second Edition, describes the operation of the interconnected power system under steady state conditions and under dynamic operating conditions during disturbances. Written at a foundational level, including numerous worked examples of concepts discussed in the text, it provides an understanding of how to keep power flowing through an interconnected grid. The second edition adds more information on power system stability, excitation system, and small disturbance analysis, as well as discussions related to grid integration of renewable power sources. The book is designed to be used as reference, review, or self-study for practitioners and consultants, or for students from related engineering disciplines that need to learn more about power systems.
  • Molten Salt Reactors and Thorium Energy

    • 1 Edición
    • Thomas James Dolan
    • Inglés
    Molten Salt Reactors is a comprehensive reference on the status of molten salt reactor (MSR) research and thorium fuel utilization. There is growing awareness that nuclear energy is needed to complement intermittent energy sources and to avoid pollution from fossil fuels. Light water reactors are complex, expensive, and vulnerable to core melt, steam explosions, and hydrogen explosions, so better technology is needed. MSRs could operate safely at nearly atmospheric pressure and high temperature, yielding efficient electrical power generation, desalination, actinide incineration, hydrogen production, and other industrial heat applications. Coverage includes: Motivation -- why are we interested? Technical issues – reactor physics, thermal hydraulics, materials, environment, … Generic designs -- thermal, fast, solid fuel, liquid fuel, … Specific designs – aimed at electrical power, actinide incineration, thorium utilization, … Worldwide activities in 23 countries Conclusions This book is a collaboration of 58 authors from 23 countries, written in cooperation with the International Thorium Molten Salt Forum. It can serve as a reference for engineers and scientists, and it can be used as a textbook for graduate students and advanced undergrads. Molten Salt Reactors is the only complete review of the technology currently available, making this an essential text for anyone reviewing the use of MSRs and thorium fuel, including students, nuclear researchers, industrial engineers, and policy makers.
  • Renewable Energy

    Physics, Engineering, Environmental Impacts, Economics and Planning
    • 5 Edición
    • Bent Sorensen
    • Inglés
    Bent Sørensen’s Renewable Energy: Physics, Engineering, Environmental Impacts, Economics and Planning, Fifth Edition, continues the tradition by providing a thorough and current overview of the entire renewable energy sphere. Since its first edition, this standard reference source helped put renewable energy on the map of scientific agendas. Several renewable energy solutions no longer form just a marginal addition to energy supply, but have become major players, with the promise to become the backbone of an energy system suitable for life in the sustainability lane. This volume is a problem-solving tool for engineers, researchers, students, consultants, and planners currently working in the field, as well as a detailed map of the renewables universe for those looking to expand into new technological specialties, offering the most comprehensive coverage of the subject available. The book has been structured around three parts in order to assist readers in focusing on the issues that impact them the most for a given project or question. PART I covers the basic scientific principles behind all major renewable energy resources, such as solar, wind, and biomass. PART II provides in-depth information about how these raw renewable sources can actually be converted into useful forms, transmitted into the grid, and stored for future utilization. Finally, PART III undertakes the aspects of energy planning, environmental impacts, and socio-economic issues on regional and global levels. In this new edition, Sørensen presents his audience with updated data about renewables market penetration, current insights on climate change, the most recent available technology for renewable energy conversion, transmission and storage, and revised planning scenarios and the future outlook.
  • Lacustrine Shale Gas

    Case Study from the Ordos Basin
    • 1 Edición
    • Xiangzeng Wang
    • Inglés
    Lacustrine Shale Gas: Case Study from the Ordos Basin examines the special sedimentation and formation environment based on the actual exploration of lacustrine shale gas. Using the Chang7 black shale of Yanchang formation in Ordos basin as an example, this book deeply dissects the Lacustrine shale geological characteristics and offers fresh insights into Lacustrine shale geochemistry, shale reservoir, hydrocarbon accumulation and resource evaluation. The book not only enriches, develops and contributes to new theories of shale gas exploration, but also contributes to a new research field, lacustrine shale gas exploration. Shale gas is the mixed phase natural gas that includes adsorbed phase and free phase gas. It is accumulated in the rich organic matter in shale. In recent years, with great changes in global oil and gas exploration and energy supply situation, shale gas has attracted a lot of attention, becoming the focus of the energy industry.
  • Geological Repository Systems for Safe Disposal of Spent Nuclear Fuels and Radioactive Waste

    • 2 Edición
    • Michael J Apted + 1 más
    • Inglés
    Geological Repository Systems for Safe Disposal of Spent Nuclear Fuels and Radioactive Waste, Second Edition, critically reviews state-of-the-art technologies and scientific methods relating to the implementation of the most effective approaches to the long-term, safe disposition of nuclear waste, also discussing regulatory developments and social engagement approaches as major themes. Chapters in Part One introduce the topic of geological disposal, providing an overview of near-surface, intermediate depth, and deep borehole disposal, spanning low-, medium- and high-level wastes. Part Two addresses the different types of repository systems – crystalline, clay, and salt, also discussing methods of site surveying and construction. The critical safety issue of engineered barrier systems is the focus of Part Three, with coverage ranging from nuclear waste canisters, to buffer and backfill materials. Lastly, Parts Four and Five focus on safety, security, and acceptability, concentrating on repository performance assessment, then radiation protection, environmental monitoring, and social engagement. Comprehensively revised, updated, and expanded with 25% new material on topics of current importance, this is the standard reference for all nuclear waste management and geological repository professionals and researchers.
  • Advances in Coal Mine Ground Control

    • 1 Edición
    • Syd S. Peng
    • Inglés
    Advances in Coal Mine Ground Control is a comprehensive text covering all recent advances in coal mine ground control, the most advanced subsystem of the rapidly advancing coal mining systems. This complete resource is written by Professor Syd Peng who, alongside leading experts from the world’s major coal producing countries, has contributed extensively to the understanding of subsidence from underground coal mining, longwall operations and ground control in underground mines. Syd and the team of contributors bring together key advances from the past decade into one comprehensive resource that is accessible to all those studying, researching and working in the mining industry. This book is an essential text for undergraduate and graduate students of mining engineering and related programs, and a must-have reference for mining, civil and geotechnical engineers.
  • Blowout and Well Control Handbook

    • 2 Edición
    • Robert D. Grace
    • Inglés
    Blowout and Well Control Handbook, Second Edition, brings the engineer and rig personnel up to date on all the useful methods, equipment, and project details needed to solve daily well control challenges. Blowouts are the most expensive and one of the most preventable accidents in the oil and gas industry. While some rig crews experience frequent well control incidents, some go years before seeing the real thing. Either way, the crew must always be prepared with quick understanding of the operations and calculations necessary to maintain well control. Updated to cover the lessons learned and new technology following the Macondo incident, this fully detailed reference will cover detection of influxes and losses in equipment and methods, a greater emphasis on kick tolerance considerations, an expanded section on floating drilling and deepwater floating drilling procedures, and a new blowout case history from Bangladesh. With updated photos, case studies, and practice examples, Blowout and Well Control Handbook, Second Edition will continue to deliver critical and modern well control information to ensure engineers and personnel stay safe, environmentally-resp... and effective on the rig.
  • Steam Generators for Nuclear Power Plants

    • 1 Edición
    • Jovica Riznic
    • Inglés
    Steam Generators for Nuclear Power Plants examines all phases of the lifecycle of nuclear steam generators (NSGs), components which are essential for the efficient and safe operation of light water reactors (LWRs). Coverage spans the design, manufacturing, operation and maintenance, fitness-for-service, and long-term operation of these key reactor parts. Part One opens with a chapter that provides fundamental background on NSG engineering and operational experiences. Following chapters review the different NSG concepts, describe NSG design and manufacturing, and consider the particularities of SGs for VVER reactors. Part Two focuses on NSG operation and maintenance, starting with an overview of the activities required to support reliable and safe operation. The discussion then moves on to tubing vibration, followed by the water and steam cycle chemistry issues relevant to the NSG lifecycle. Finally, a number of chapters focus on the key issue of corrosion in NSGs from different angles. This book serves as a timely resource for professionals involved in all phases of the NSG lifecycle, from design, manufacturing, operation and maintenance, to fitness-for-service and long-term operation. It is also intended as a valuable resource for students and researchers interested in a range of topics relating to NSG lifecycle management.
  • Solid Oxide Fuel Cell Lifetime and Reliability

    Critical Challenges in Fuel Cells
    • 1 Edición
    • Nigel Brandon
    • Inglés
    Solid Oxide Fuel Cell Lifetime and Reliability: Critical Challenges in Fuel Cells presents in one volume the most recent research that aims at solving key issues for the deployment of SOFC at a commercial scale and for a wider range of applications. To achieve that, authors from different regions and backgrounds address topics such as electrolytes, contaminants, redox cycling, gas-tight seals, and electrode microstructure. Lifetime issues for particular elements of the fuel cells, like cathodes, interconnects, and fuel processors, are covered as well as new materials. They also examine the balance of SOFC plants, correlations between structure and electrochemical performance, methods for analysis of performance and degradation assessment, and computational and statistical approaches to quantify degradation. For its holistic approach, this book can be used both as an introduction to these issues and a reference resource for all involved in research and application of solid oxide fuel cells, especially those developing understanding in industrial applications of the lifetime issues. This includes researchers in academia and industrial R&D, graduate students and professionals in energy engineering, electrochemistry, and materials sciences for energy applications. It might also be of particular interest to analysts who are looking into integrating SOFCs into energy systems.
  • From Pinch Methodology to Pinch-Exergy Integration of Flexible Systems

    • 1 Edición
    • Assaad Zoughaib
    • Inglés
    Current changes to the energy market, as well as an ambition to achieve decarbonation and highly energy efficient systems, will lead to a fundamental change in the way in which energy systems are designed and managed. In particular, the growth of renewable and renewed energy will introduce a level of design and management complexity with a greater need for efficient energy storage. Beginning with the earliest methodologies (pinch), this book explores the methodology and tools necessary for the design of flexible energy efficient systems. In addition to studying the related literature, the author details original developments where exergy consumption is introduced as an objective function to minimize in mathematical programming models for both continuous and batch processes. Most of these developments were made in the Center for Energy Efficiency of Systems at Mines ParisTech and reported in PhD dissertations and published articles. The whole methodology is implemented in the open source CERES platform.
  • Fire Pump Arrangements at Industrial Facilities

    • 3 Edición
    • Dennis P. Nolan
    • Inglés
    Fire Pump Arrangements at Industrial Facilities, Third Edition delivers a practical reference from an author with a successful professional career in fire protection and loss prevention engineering in the oil and gas industry. While most regulatory standards are left to interpretation and try to cover multiple industries in one location, this book focuses on the equipment, standards and operations specific to the petroleum industry, covering quality controls, pump drivers and scheduled maintenance and audits so the equipment remains in safety compliance. Enhanced with new sections on human factors, case studies for modeling fire accidents and a look at recent events that have further shaped the safety and testing of fire pumps, the book provides the engineer and manager with a critical oil and gas resource for every aspect of firewater pumps.
  • Distributed Generation Systems

    Design, Operation and Grid Integration
    • 1 Edición
    • Gevork B. Gharehpetian + 1 más
    • Inglés
    Distributed Generation Systems: Design, Operation and Grid Integration closes the information gap between recent research on distributed generation and industrial plants, and provides solutions to their practical problems and limitations. It provides a clear picture of operation principles of distributed generation units, not only focusing on the power system perspective but targeting a specific need of the research community.This book is a useful reference for practitioners, featuring worked examples and figures on principal types of distributed generation with an emphasis on real-world examples, simulations, and illustrations. The book uses practical exercises relating to the concepts of operating and integrating DG units to distribution networks, and helps engineers accurately design systems and reduce maintenance costs.
  • Electricity Generation and the Environment

    • 1 Edición
    • Paul Breeze
    • Inglés
    Electricity Generation and the Environment is a very concise, up-to-date, and accessible guide to the evolution of environmental awareness, what that environmental awareness has taught the industry, and how technologies can be used to test and improve power performance. There is a strong emphasis on the related social impacts and economic factors involved in the various methods of generating electricity which Breeze explores, making this a valuable and insightful read for those involved in the planning and delivery of energy, such as energy engineers, power generation planners, policy makers, managers, and academics.
  • Thermal-Hydraulics of Water Cooled Nuclear Reactors

    • 1 Edición
    • Francesco D'Auria
    • Inglés
    Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability.
  • Advances in Bioenergy

    • 1 Edición
    • Volumen 2
    • Inglés
    Advances in Bioenergy, Volume Two is a new series that provides both principles and recent developments in various kinds of bioenergy technologies, including feedstock development, conversion technologies, energy and economics, and environmental analysis. Topics covered in this latest release include the Principles and Development of Lignocellulosic Biomass Pretreatment for Biofuels, Anaerobic Digestion Modelling, Consolidated Bioprocessing Systems for Cellulosic Biofuel Production, Thermochemical Conversion of Plant Oils and Derivatives to Lubricants, and the Development of Synthetic Microbial Platforms to Convert Lignocellulosic Biomass to Biofuels. The series uniquely provides the fundamentals of the technologies, along with reviews that will be invaluable for students.
  • Pressure Retarded Osmosis

    Renewable Energy Generation and Recovery
    • 1 Edición
    • Khaled Touati + 4 más
    • Inglés
    Pressure Retarded Osmosis: Renewable Energy Generation and Recovery offers the first comprehensive resource on this method of generating renewable energy. Dr. Khaled Touati and the team of editors combine their expertise with contributions from other leaders in the field to create this well-rounded resource, which discusses and analyses this novel method of creating a controllable renewable energy. The promises of the PRO technique are first clearly presented and explained, and the authors then provide a comprehensive analysis of the issues that remain such as Concentration Polarization, Membrane Deformation, and Reverse Salt Diffusion. Possible solutions to these issues which often restrict industrial implementation are then discussed to mitigate these detrimental effects, and there is also an emphasis on the recovery of energy from desalination processes using PRO, which is able to reduce energy consumption and make it more economically and environmentally efficient.
  • The Performance of Concentrated Solar Power (CSP) Systems

    Analysis, Measurement and Assessment
    • 1 Edición
    • Peter Heller
    • Inglés
    The Performance of Concentrated Solar Power (CSP) Systems: Analysis, Measurement, and Assessment offers a unique overview of the information on the state-of-the-art of analysis, measurement, and assessment of the performance of concentrated solar power (CSP) components and systems in a comprehensive, compact, and complete manner. Following an introductory chapter to CSP systems and the fundamental principles of performance assessment, individual chapters explore the component performance of mirrors and receivers. Further expert-written chapters look at system performance assessment, durability testing, and solar resource forecasting for CSP systems. A final chapter gives an outlook on the actual methods and instruments for performance and durability assessment that are underdevelopment. The Performance of Concentrated Solar Power (CSP) Systems: Analysis, Measurement, and Assessment is an essential reference text for research and development professionals and engineers working on concentrated solar power systems, as well as for postgraduate students studying CSP.
  • Wind Energy Engineering

    A Handbook for Onshore and Offshore Wind Turbines
    • 1 Edición
    • Trevor Letcher
    • Inglés
    Wind Energy Engineering: A Handbook for Onshore and Offshore Wind Turbines is the most advanced, up-to-date and research-focused text on all aspects of wind energy engineering. Wind energy is pivotal in global electricity generation and for achieving future essential energy demands and targets. In this fast moving field this must-have edition starts with an in-depth look at the present state of wind integration and distribution worldwide, and continues with a high-level assessment of the advances in turbine technology and how the investment, planning, and economic infrastructure can support those innovations. Each chapter includes a research overview with a detailed analysis and new case studies looking at how recent research developments can be applied. Written by some of the most forward-thinking professionals in the field and giving a complete examination of one of the most promising and efficient sources of renewable energy, this book is an invaluable reference into this cross-disciplinary field for engineers.
  • Innovation and Disruption at the Grid’s Edge

    How Distributed Energy Resources are Disrupting the Utility Business Model
    • 1 Edición
    • Fereidoon Sioshansi
    • Inglés
    Innovation and Disruption at the Grid’s Edge examines the viable developments in peer-to-peer transactions enabled by open platforms on the grid’s edge. With consumers and prosumers using more electronic platforms to trade surplus electricity from rooftop solar panels, share a storage battery, or use smart gadgets that manage load and self-generation, the grid's edge is becoming crowded. The book examines the growing number of consumers engaging in self-generation and storage, and analyzes the underlying causes and drivers of change, as well as the implications of how the utility sector—particularly the distribution network—should/could be regulated. The book also explores how tariffs are set and revenues are collected to cover both fixed and variable costs in a sustainable way. This reference is useful for anyone interested in the areas of energy generation and regulation, especially stakeholders engaged in the generation, transmission, and distribution of power.
  • Electric Motor Control

    DC, AC, and BLDC Motors
    • 1 Edición
    • Sang-Hoon Kim
    • Inglés
    Electric Motor Control: DC, AC, and BLDC Motors introduces practical drive techniques of electric motors to enable stable and efficient control of many application systems, also covering basic principles of high-performance motor control techniques, driving methods, control theories and power converters. Electric motor drive systems play a critical role in home appliances, motor vehicles, robotics, aerospace and transportation, heating ventilating and cooling equipment’s, robotics, industrial machinery and other commercial applications. The book provides engineers with drive techniques that will help them develop motor drive system for their applications.
  • Hydrogen Economy

    Supply Chain, Life Cycle Analysis and Energy Transition for Sustainability
    • 1 Edición
    • Antonio Scipioni + 2 más
    • Inglés
    Hydrogen Economy: Supply Chain, Life Cycle Analysis and Energy Transition for Sustainability explores the challenges for the transition into a sustainable hydrogen economy. In this book, experts from various academic backgrounds discuss the tools and methodologies for the analysis, planning, design and optimization of hydrogen supply chains. They examine the available technologies for hydrogen production, storage, transport, distribution and energy conversion, providing a cross cutting perspective on their sustainability. Environmental, social and economic aspects are considered, allowing for a more complete life cycle assessment of the entire supply chain. Methods and frameworks for multi-criteria decision making for the sustainable implementation of hydrogen systems are also covered. Providing a broad overview of the subject and well-recognized tools to manage hydrogen sustainability, this book is a useful resource for engineering researchers and PhD students in energy, environmental and industrial areas, energy economy researchers, practicing hydrogen energy engineers and technicians, energy and environmental consultants, life cycle assessment practitioners and consultants.
  • Energy

    Its Production, Conversion and Use in the Service of Man
    • 1 Edición
    • Philip Sporn
    • M. W. Thring + 2 más
    • Inglés
    Energy: Its Production, Conversion and Use in the Service of Man deals with energy production and conversion as well as its role in the advancement of civilization. Based on three lectures delivered in February-March 1962 under the auspices of the Graduate School of Business Columbia University, the book explores a wide range of energy-related issues such as energy supply, fossil fuels, electricity, nuclear power, coal, oil, and natural gas. This volume begins with a discussion of some of the current fallacies and overstatements about the role of energy, including the fear of a world shortage of energy, the premature optimism about the early replacement of fossil fuels by nuclear power, and the idea that energy is a panacea for the solution of the problems of underdeveloped countries. It argues that the future of energy in this century is secure owing to the large reserves of coal and the continuous discoveries of fresh sources of oil and natural gas, along with the ultimate promise of economic nuclear power. The importance of electricity in the economic growth of the United States is highlighted. Attention then turns to the probable consumption of energy in the United States in the years 1975 and 2000. The book concludes by calling for the continuous development of an adequate supply of fossil fuels. This book will be of interest to students, planners and policymakers, as well as workers and researchers in every phase of energy, including scientists, technologists, and engineers.
  • Coal Combustion Products (CCPs)

    Characteristics, Utilization and Beneficiation
    • 1 Edición
    • Tom Robl + 2 más
    • Inglés
    Coal Combustion Products (CCPs): Their Nature, Utilization and Beneficiation is a valuable resource for engineers and scientists from the coal, cement, concrete, and construction industries seeking an in-depth guide to the characteristics, utilization, beneficiation, and environmental impacts of coal combustion by-products. Researchers in universities working in this area will also find much to expand their knowledge. The book provides a detailed overview of the different waste materials produced during power generation from coal, exploring their nature, beneficiation techniques, applications, and environmental impacts. Strong focus is placed on coal fly ash, bottom ash, and flue gas desulfurization materials, and their employment in cement, concrete, gypsum products, aggregates, road construction, geotechnics, and agriculture, among other products and industries. Part 1 focuses on the nature of coal ashes, with chapters on their origin, generation, and storage, both in ponds and landfill. The coal combustion by-products produced as a result of clean coal technologies are the focus of the final chapter in the section. The next group of chapters in Part 2 considers the utilization of different waste materials, including the key products coal fly ash, bottom ash, and flue gas desulfurization materials. This is followed by a contribution reviewing the latest research into innovative and advanced uses for coal ash. After an introduction to ash quality problems and quality monitoring, Part 3 concentrates on the essential area of by-product beneficiation techniques, in other words how to maximize the quality of materials for the end user. Topics covered include separation methods, thermal processing, and chemical passivation. The final section of the book addresses environmental issues, including the use of coal combustion by-products in green construction materials and the essential health and safety considerations associated with their use.
  • Pipeline Integrity

    Management and Risk Evaluation
    • 2 Edición
    • Ramesh Singh
    • Inglés
    Pipeline engineers, operators, and plant managers are responsible for the safety of pipelines, facilities, and staying on top of regulatory compliance and maintenance. However, they frequently need reference materials to support their decision, and many new pipeline engineers and plant managers are responsible for major repairs and decisions yet do not have the proper reference to set a holistic integrity plan in place. Pipeline Integrity, Second Edition delivers necessary pipeline inspection methods, identification of hazard mechanisms, risk and consequence evaluations, and repair strategies. Covering relevant standards and processes for risk, assessment, and integrity management, this go-to reference provides the principles that guide these concepts enhanced with more critical regulatory information and easier organization betwen liquid and gas pipelines. More detailed information is provided on asset reliability, including risk-based inspection and other inspection prioritizing tools such as value-driven maintenance and evidence-based asset management. Pipeline Integrity, Second Edition continues to provide engineers and plants managers a vital resource for keeping their pipelines and facilities safe and efficient.
  • Europe’s Energy Transition

    Insights for Policy Making
    • 1 Edición
    • Manuel Welsch
    • Inglés
    Europe’s Energy Transition: Insights for Policy Making looks at the availability and cost of accessing energy and how it significantly affects economic growth and competitiveness in global markets. The results in this book, from a European Commission (EC) financed project by INSIGHT_E, provide an overview of the most recent analyses, focusing on energy markets and their implications for society. Designed to inform European policymaking, elements of this book will be integrated into upcoming EC policies, giving readers invaluable insights into the cost and availability of energy, the effect of price increases affecting vulnerable consumer groups, and current topics of interest to the EC and ongoing energy debate.INSIGHT_E provides decision-makers with unbiased policy advice and insights on the latest developments, including an assessment of their potential impact.
  • Performance Management for the Oil, Gas, and Process Industries

    A Systems Approach
    • 1 Edición
    • Robert Bruce Hey
    • Inglés
    Performance Management for the Oil, Gas, and Process Industries: A Systems Approach is a practical guide on the business cycle and techniques to undertake step, episodic, and breakthrough improvement in performance to optimize operating costs. Like many industries, the oil, gas, and process industries are coming under increasing pressure to cut costs due to ongoing construction of larger, more integrated units, as well as the application of increasingly stringent environmental policies. Focusing on the ‘value adder’ or ‘revenue generator’ core system and the company direction statement, this book describes a systems approach which assures significant sustainable improvements in the business and operational performance specific to the oil, gas, and process industries. The book will enable the reader to: utilize best practice principles of good governance for long term performance enhancement; identify the most significant performance indicators for overall business improvement; apply strategies to ensure that targets are met in agreed upon time frames.
  • Energy Management in Wireless Sensor Networks

    • 1 Edición
    • Youcef Touati + 2 más
    • Inglés
    Energy Management in Wireless Sensor Networks discusses this unavoidable issue in the application of Wireless Sensor Networks (WSN). To guarantee efficiency and durability in a network, the science must go beyond hardware solutions and seek alternative software solutions that allow for better data control from the source to delivery. Data transfer must obey different routing protocols, depending on the application type and network architecture. The correct protocol should allow for fluid information flow, as well as optimizing power consumption and resources – a challenge faced by dense networks. The topics covered in this book provide answers to these needs by introducing and exploring computer-based tools and protocol strategies for low power consumption and the implementation of routing mechanisms which include several levels of intervention, ranging from deployment to network operation.
  • Inspection and Monitoring Technologies of Transmission Lines with Remote Sensing

    • 1 Edición
    • Yi Hu + 1 más
    • Inglés
    Inspection and Monitoring Technologies of Transmission Lines with Remote Sensing helps readers build a thorough understanding of new technologies and world-class practices developed by the State Grid Corporation of China—the organization responsible for the world’s largest power distribution network. Monitoring the operational status of high-voltage transmission lines is critical in supply assurance and continuity. Given the physical size, geographical, and climate variances that transmission lines are subject to, remote sensing and inspection is a critical technology for power distribution organizations. This reference covers current and developing technologies, equipment, and methods for the safe and secure operation and maintenance of transmission lines, including satellite remote sensing technology, infrared and ultraviolet detection technology, helicopter inspection technology, and condition monitoring technology.
  • Well Test Analysis for Multilayered Reservoirs with Formation Crossflow

    • 1 Edición
    • Hedong Sun + 1 más
    • Inglés
    Well Test Analysis for Multilayered Reservoirs with Formation Crossflow introduces the fundamentals of well test analysis of a multilayered reservoir with formation crossflow. The effects of reservoir parameters on wellbore pressure and flow rate are examined, as is a proper method that has been established to analyze well test data that leads to better determinations on the reservoir parameters for each layer of the reservoir. Focusing on multilayer models for data analysis, this reference explains the reasons for the existence of single-phase crossflow in multilayer reservoirs, exploring methods to establish them and presenting practical applications to utilize and implement for today’s more complex reservoirs. Aiding in better well testing operations and models, this book is a one-stop solution for today’s reservoir and production engineer, helping them understand every layer of their reservoir.
  • Lead-Acid Batteries: Science and Technology

    A Handbook of Lead-Acid Battery Technology and Its Influence on the Product
    • 2 Edición
    • D. Pavlov
    • Inglés
    Lead-Acid Batteries: Science and Technology: A Handbook of Lead-Acid Battery Technology and Its Influence on the Product, Second Edition presents a comprehensive overview of the technological processes of lead-acid battery manufacture and their influence on performance parameters. The book summarizes current knowledge on lead-acid battery production, presenting it in the form of an integral theory that is supported by ample illustrative material and experimental data that allows technologists and engineers to control technological processes in battery plants. In addition, the book provides university lecturers with a tool for a clear and in-depth presentation of lead-acid battery production in courses. This updated edition includes new supplementary material (text and illustrations) in chapters 2, 4, 6 and 16, as well as a brand new chapter on the action of carbon as an additive to the negative active material and the utilization of the lead-carbon supercapacitor electrodes. Substantial revisions of other chapters have been made, making the book beneficial for battery researchers, engineers and technologists.
  • Flash Memory Integration

    Performance and Energy Issues
    • 1 Edición
    • Jalil Boukhobza + 1 más
    • Inglés
    4 zettabytes (4 billion terabytes) of data generated in 2013, 44 zettabytes predicted for 2020 and 185 zettabytes for 2025. These figures are staggering and perfectly illustrate this new era of data deluge. Data has become a major economic and social challenge. The speed of processing of these data is the weakest link in a computer system: the storage system. It is therefore crucial to optimize this operation. During the last decade, storage systems have experienced a major revolution: the advent of flash memory. Flash Memory Integration: Performance and Energy Issues contributes to a better understanding of these revolutions. The authors offer us an insight into the integration of flash memory in computer systems, their behavior in performance and in power consumption compared to traditional storage systems. The book also presents, in their entirety, various methods for measuring the performance and energy consumption of storage systems for embedded as well as desktop/server computer systems. We are invited on a journey to the memories of the future.
  • Heat Recovery Steam Generator Technology

    • 1 Edición
    • Vernon L. Eriksen
    • Inglés
    Heat Recovery Steam Generator Technology is the first fully comprehensive resource to provide readers with the fundamental information needed to understand HRSGs. The book's highly experienced editor has selected a number of key technical personnel to contribute to the book, also including burner and emission control device suppliers and qualified practicing engineers. In the introduction, various types of HRSGs are identified and discussed, along with their market share. The fundamental principles of the technology are covered, along with the various components and design specifics that should be considered. Its simple organization makes finding answers quick and easy. The text is fully supported by examples and case studies, and is illustrated by photographs of components and completed power plants to further increase knowledge and understanding of HRSG technology.
  • The Power Grid

    Smart, Secure, Green and Reliable
    • 1 Edición
    • Brian D’Andrade
    • Inglés
    The Power Grid: Smart, Secure, Green and Reliable offers a diverse look at the traditional engineering and physics aspects of power systems, also examining the issues affecting clean power generation, power distribution, and the new security issues that could potentially affect the availability and reliability of the grid. The book looks at growth in new loads that are consuming over 1% of all the electrical power produced, and how combining those load issues of getting power to the regions experiencing growth in energy demand can be addressed. In addition, it considers the policy issues surrounding transmission line approval by regulators. With truly multidisciplinary content, including failure analysis of various systems, photovoltaic, wind power, quality issues with clean power, high-voltage DC transmission, electromagnetic radiation, electromagnetic interference, privacy concerns, and data security, this reference is relevant to anyone interested in the broad area of power grid stability.
  • Optimization in Renewable Energy Systems

    Recent Perspectives
    • 1 Edición
    • Ozan Erdinc
    • Inglés
    Optimization in Renewable Energy Systems: Recent Perspectives covers all major areas where optimization techniques have been applied to reduce uncertainty or improve results in renewable energy systems (RES). Production of power with RES is highly variable and unpredictable, leading to the need for optimization-based planning and operation in order to maximize economies while sustaining performance. This self-contained book begins with an introduction to optimization, then covers a wide range of applications in both large and small scale operations, including optimum operation of electric power systems with large penetration of RES, power forecasting, transmission system planning, and DG sizing and siting for distribution and end-user premises. This book is an excellent choice for energy engineers, researchers, system operators, system regulators, and graduate students.
  • Lead-Acid Batteries for Future Automobiles

    • 1 Edición
    • Jürgen Garche + 3 más
    • Inglés
    Lead-Acid Batteries for Future Automobiles provides an overview on the innovations that were recently introduced in automotive lead-acid batteries and other aspects of current research. Innovative concepts are presented, some of which aim to make lead-acid technology a candidate for higher levels of powertrain hybridization, namely 48-volt mild or high-volt full hybrids. Lead-acid batteries continue to dominate the market as storage devices for automotive starting and power supply systems, but are facing competition from alternative storage technologies and being challenged by new application requirements, particularly related to new electric vehicle functions and powertrain electrification.
  • Emerging Nanotechnologies in Rechargeable Energy Storage Systems

    • 1 Edición
    • Lide M Rodriguez-Martinez + 1 más
    • Inglés
    Emerging Nanotechnologies in Rechargeable Energy Storage Systems addresses the technical state-of-the-art of nanotechnology for rechargeable energy storage systems. Materials characterization and device-modeling aspects are covered in detail, with additional sections devoted to the application of nanotechnology in batteries for electrical vehicles. In the later part of the book, safety and regulatory issues are thoroughly discussed. Users will find a valuable source of information on the latest developments in nanotechnology in rechargeable energy storage systems. This book will be of great use to researchers and graduate students in the fields of nanotechnology, electrical energy storage, and those interested in materials and electrochemical cell development.
  • Fundamentals and Applications of Supercritical Carbon Dioxide (SCO2) Based Power Cycles

    • 1 Edición
    • Klaus Brun + 2 más
    • Inglés
    Fundamentals and Applications of Supercritical Carbon Dioxide (SCO2) Based Power Cycles aims to provide engineers and researchers with an authoritative overview of research and technology in this area. Part One introduces the technology and reviews the properties of SCO2 relevant to power cycles. Other sections of the book address components for SCO2 power cycles, such as turbomachinery expanders, compressors, recuperators, and design challenges, such as the need for high-temperature materials. Chapters on key applications, including waste heat, nuclear power, fossil energy, geothermal and concentrated solar power are also included. The final section addresses major international research programs. Readers will learn about the attractive features of SC02 power cycles, which include a lower capital cost potential than the traditional cycle, and the compounding performance benefits from a more efficient thermodynamic cycle on balance of plant requirements, fuel use, and emissions.
  • Solid Fuels and Heavy Hydrocarbon Liquids

    Thermal Characterization and Analysis
    • 2 Edición
    • Rafael Kandiyoti + 3 más
    • Inglés
    Solid Fuels and Heavy Hydrocarbon Liquids: Thermal Characterisation and Analysis, Second Edition integrates the developments that have taken place since publication of the first edition in 2006. This updated material includes new insights that help unify the thermochemical reactions of biomass and coal, as well as new developments in analytical techniques, including new applications in size exclusion chromatography, several mass spectrometric techniques, and new applications of nuclear magnetic spectroscopy to the characterization of heavy hydrocarbon liquids The topics covered are essential for the energy and fuels research community, including academics, students, and research engineers working in the power, oil and gas, and renewable energy industries.
  • Technologies for Biochemical Conversion of Biomass

    • 1 Edición
    • Hongzhang Chen + 1 más
    • Inglés
    Technologies for Biochemical Conversion of Biomass introduces biomass biochemical conversion technology, including the pretreatment platform, enzyme platform, cell refining platform, sugar platform, fermentation platform, and post-treatment platform. Readers will find a systematic treatment, not only of the basics of biomass biochemical conversion and the introduction of each strategy, but also of the current advances of research in this area. Researchers will find the key problems in each technology platform for biomass biochemical conversion identified and solutions offered. This valuable reference book features new scientific research and the related industrial application of biomass biochemical conversion technology as the main content, and then systematically introduces the basic principles and applications of biomass biochemical conversion technology.
  • Integrated Gasification Combined Cycle (IGCC) Technologies

    • 1 Edición
    • Ting Wang + 1 más
    • Inglés
    Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants.
  • Oil Spill Science and Technology

    • 2 Edición
    • Merv Fingas
    • Inglés
    Oil Spill Science and Technology, Second Edition, delivers a multi-contributed view on the entire chain of oil-spill related topics from oil properties and behaviors, to remote sensing through the management side of contingency planning and communicating oil spill risk perceptions. Completely new case studies are included with special attention to the Deepwater Horizon event, covering the impacts of wetlands and sand beaches, a mass balance approach, and the process for removing petroleum chemicals still trapped near Alabama beaches. Other new information on lingering oil left behind from the Exxon Valdez spill, the emergency system used in the Prestige incident, and coverage on the Heibei Spirit spill in Korea are also included. This updated edition combines technology with case studies to identify the current state of knowledge surrounding oil spills that will encourage additional areas of research that are left to uncover in this critical sector of the oil and gas industry.
  • Intelligence in Energy

    • 1 Edición
    • Gülgün Kayakutlu + 1 más
    • Inglés
    In a world of increasing population, this book explores the ways in which technological progress can provide smart energy management strategies to maximize resources.Energy is essential to the survival and development of mankind. Increased pressure on existing resources now requires wiser energy management, in addition to the discovery of new resources. Challenges such as the global trend of “cheaper”, exponentially increasing demand in new geographies, and current climate change policies now call for new approaches and ways of thinking about energy use which consider the impact on all involved actors, and on nature. Energy generation and management can be made more efficient by making use of technological progress and sharing global experience in the smart use of this resource. This book presents a knowledge-based review of the past, present and future of energy usage, with mathematical, modeling, economic, technological and environmental perspectives. The ideas and experiences shared here propose wiser energy management as a system component of natural ecosystems.
  • Advances in Steam Turbines for Modern Power Plants

    • 1 Edición
    • Tadashi Tanuma
    • Inglés
    Advances in Steam Turbines for Modern Power Plants provides an authoritative review of steam turbine design optimization, analysis and measurement, the development of steam turbine blades, and other critical components, including turbine retrofitting and steam turbines for renewable power plants. As a very large proportion of the world’s electricity is currently generated in systems driven by steam turbines, (and will most likely remain the case in the future) with steam turbines operating in fossil-fuel, cogeneration, combined cycle, integrated gasification combined cycle, geothermal, solar thermal, and nuclear plants across the world, this book provides a comprehensive assessment of the research and work that has been completed over the past decades.
  • Shale Oil and Gas Handbook

    Theory, Technologies, and Challenges
    • 1 Edición
    • Sohrab Zendehboudi + 1 más
    • Inglés
    Shale Oil and Gas Handbook: Theory, Technologies, and Challenges provides users with information on how shale oil and gas exploration has revolutionized today’s energy industry. As activity has boomed and job growth continues to increase, training in this area for new and experienced engineers is essential. This book provides comprehensive information on both the engineering design and research aspects of this emerging industry. Covering the full spectrum of basic definitions, characteristics, drilling techniques, and processing and extraction technologies, the book is a great starting point to educate oil and gas personnel on today’s shale industry. Critical topics covered include characterization of shale gas, theory and methods, typical costs, and obstacles for exploration and drilling, R&D and technology development in shale production, EOR methods in shale oil reservoirs, and the current status and impending challenges for shale oil and gas, including the inevitable future prospects relating to worldwide development.