Saltar al contenido principal
Elsevier

Libros en Energía y Potencia

  • Stand-Alone and Hybrid Wind Energy Systems

    Technology, Energy Storage and Applications
    • 1 Edición
    • J K Kaldellis
    • Inglés
    Wind power is fast becoming one of the leading renewable energy sources worldwide, not only from large scale wind farms but also from the increasing penetration of stand-alone and hybrid wind energy systems. These systems are primarily of benefit in small-scale applications, especially where there is no connection to a central electricity network, and where there are limited conventional fuel resources but available renewable energy resources. By applying appropriate planning, systems selection and sizing, including the integration of energy storage devices to mitigate variable energy generation patterns, theses systems can supply secure reliable and economic power to remote locations and distributed micro-grids.Stand-al... and hybrid wind energy systems is a synthesis of the most recent knowledge and experience on wind-based hybrid renewable energy systems, comprehensively covering the scientific, technical and socio-economic issues involved in the application of these systems.Part one presents an overview of the fundamental science and engineering of stand-alone and hybrid wind energy systems and energy storage technology, including design and performance optimisation methods and feasibility assessment for these systems. Part two initially reviews the design, development, operation and optimisation of stand-alone and hybrid wind energy systems – including wind-diesel, wind -photovoltaic (PV), wind-hydrogen, and wind-hydropower energy systems – before moving on to examine applicable energy storage technology, including electro-chemical, flywheel (kinetic) and compressed air energy storage technologies. Finally, Part three assesses the integration of stand-alone and hybrid wind energy systems and energy technology into remote micro-grids and buildings, and their application for desalination systems.With its distinguished editor and international team of contributors, Stand-alone and hybrid wind energy systems is a standard reference for all renewable energy professionals, consultants, researchers and academics from post-graduate level up.

  • Developments and Innovation in Carbon Dioxide (CO2) Capture and Storage Technology

    • 1 Edición
    • M. Mercedes Maroto-Valer
    • Inglés
    Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing and storing the CO2 emissions from burning fossil-fuels and biomass. Volume one provides a comprehensive reference on the state of the art research, development and demonstration of carbon capture technology in the power sector and in industry. It critically reviews the range of post- and pre-combustion capture and combustion-based capture processes and technology applicable to fossil-fuel power plants, as well as applications of CCS in other high carbon footprint industries.Volume two provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction.

  • Developments and Innovation in Carbon Dioxide (CO2) Capture and Storage Technology

    Carbon Dioxide (Co2) Storage and Utilisation
    • 1 Edición
    • M. Mercedes Maroto-Valer
    • Inglés
    Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing, and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction.

  • Analytical Modelling of Fuel Cells

    • 1 Edición
    • Andrei A. Kulikovsky
    • Inglés
    In fuel cell research, the gap between fundamental electrochemical processes and the engineering of fuel cell systems is bridged by the physical modelling of fuel cells. This relatively new discipline aims to understand the basic transport and kinetic phenomena in a real cell and stack environment, paving the way for improved design and performance. The author brings his unique approach to the analytical modeling of fuel cells to this essential reference for energy technologists.

  • Proceedings of the 2nd Annual Gas Processing Symposium

    Qatar, January 10-14, 2010
    • 1 Edición
    • Volumen 2
    • Farid Benyahia + 1 más
    • Inglés
    Advances in Gas Processing: Proceedings of the 2nd Annual Gas Processing Symposium 11-1 4 January, 2010, Doha, Qatar, reviews the state of knowledge in gas processing. The contributions are organized around five main themes: (i) environmental sustainability; (ii) natural gas processing technologies; (iii) energy efficiency in operations; (iv) design and safety; and (v) operational excellence. The papers on environmental sustainability cover topics such as the biogasification of waste monoethanolamine; the role of LNG in a carbon constrained world; and sustainable water management. The papers on natural gas processing technologies include the removal of acid gases from natural gas streams via membrane technology and selective control of Fischer-Tropsch synthesis hydrocarbons product distribution. The papers on energy efficiency in operations cover lifted turbulent jet flame in a cross-flow; novel hybrid biomass and coal processes; and the adoption of plug-in hybrid electric vehicles (PHEVs). The papers on design and safety include studies on the optimal design and operation of a GTL process and efficient design, operating, and control strategies for LNG plants. The papers on operational excellence deal with topics such as chemicals in gas processing; the monitoring and optimization of hydrocarbon separation equipment; and the inhibition of gas hydrate formation.

  • Developments and Innovation in Carbon Dioxide (CO2) Capture and Storage Technology

    Carbon Dioxide (Co2) Capture, Transport and Industrial Applications
    • 1 Edición
    • M. Mercedes Maroto-Valer
    • Inglés
    Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon capture technology in the power sector and in industry. It critically reviews the range of post- and pre-combustion capture and combustion-based capture processes and technology applicable to fossil-fuel power plants, as well as applications of CCS in other high carbon footprint industries.

  • Biomass Gasification and Pyrolysis

    Practical Design and Theory
    • 1 Edición
    • Prabir Basu
    • Inglés
    This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown.

  • Integrated Reservoir Asset Management

    Principles and Best Practices
    • 1 Edición
    • John Fanchi
    • Inglés
    All too often, senior reservoir managers have found that their junior staff lack an adequate understanding of reservoir management techniques and best practices needed to optimize the development of oil and gas fields. Written by an expert professional/educato... Integrated Reservoir Asset Management introduces the reader to the processes and modeling paradigms needed to develop the skills to increase reservoir output and profitability and decrease guesswork. One of the only references to recognize the technical diversity of modern reservoir management teams, Fanchi seamlessly brings together concepts and terminology, creating an interdisciplinary approach for solving everyday problems. The book starts with an overview of reservoir management, fluids, geological principles used to characterization, and two key reservoir parameters (porosity and permeability). This is followed by an uncomplicated review of multi-phase fluid flow equations, an overview of the reservoir flow modeling process and fluid displacement concepts. All exercises and case studies are based on the authors 30 years of experience and appear at the conclusion of each chapter with hints in addition of full solutions. In addition, the book will be accompanied by a website featuring supplementary case studies and modeling exercises which is supported by an author generated computer program.

  • Enhanced Oil Recovery

    Field Planning and Development Strategies
    • 1 Edición
    • Vladimir Alvarado + 1 más
    • Inglés
    Enhanced-Oil Recovery (EOR) evaluations focused on asset acquisition or rejuvenation involve a combination of complex decisions, using different data sources. EOR projects have been traditionally associated with high CAPEX and OPEX, as well as high financial risk, which tend to limit the number of EOR projects launched. In this book, the authors propose workflows for EOR evaluations that account for different volumes and quality of information. This flexible workflow has been successfully applied to oil property evaluations and EOR feasibility studies in many oil reservoirs. The methodology associated with the workflow relies on traditional (look-up tables, XY correlations, etc.) and more advanced (data mining for analog reservoir search and geology indicators) screening methods, emphasizing identification of analogues to support decision making. The screening phase is combined with analytical or simplified numerical simulations to estimate full-field performance by using reservoir data-driven segmentation procedures.

  • Advanced Power Plant Materials, Design and Technology

    • 1 Edición
    • Dermot Roddy
    • Inglés
    Fossil-fuel power plants account for the majority of worldwide power generation. Increasing global energy demands, coupled with issues of ageing and inefficient power plants, have led to new power plant construction programmes. As cheaper fossil fuel resources are exhausted and emissions criteria are tightened, utilities are turning to power plants designed with performance in mind to satisfy requirements for improved capacity, efficiency, and environmental characteristics.Adva... power plant materials, design and technology provides a comprehensive reference on the state of the art of gas-fired and coal-fired power plants, their major components and performance improvement options. Part one critically reviews advanced power plant designs which target both higher efficiency and flexible operation, including reviews of combined cycle technology and materials performance issues.Part two reviews major plant components for improved operation, including advanced membrane technology for both hydrogen (H2) and carbon dioxide (CO2) separation, as well as flue gas handling technologies for improved emissions control of sulphur oxides (SOx), nitrogen oxides (NOx), mercury, ash and particulates. The section concludes with coverage of high-temperature sensors, and monitoring and control technology that are essential to power plant operation and performance optimisation.Part three begins with coverage of low-rank coal upgrading and biomass resource utilisation for improved power plant fuel flexibility. Routes to improve the environmental impact are also reviewed, with chapters detailing the integration of underground coal gasification and the application of carbon dioxide (CO2) capture and storage. Finally, improved generation performance is reviewed with coverage of syngas and hydrogen (H2) production from fossil-fuel feedstocks.With its distinguished international team of contributors, Advanced power plant materials, design and technology is a standard reference for all power plant engineers and operators, as well as to academics and researchers in this field.

  • Materials for Energy Efficiency and Thermal Comfort in Buildings

    • 1 Edición
    • Matthew R Hall
    • Inglés
    Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science.

  • Electrical Load Forecasting

    Modeling and Model Construction
    • 1 Edición
    • S.A. Soliman
    • Inglés
    Succinct and understandable, this book is a step-by-step guide to the mathematics and construction of electrical load forecasting models. Written by one of the world’s foremost experts on the subject, Electrical Load Forecasting provides a brief discussion of algorithms, their advantages and disadvantages and when they are best utilized. The book begins with a good description of the basic theory and models needed to truly understand how the models are prepared so that they are not just blindly plugging and chugging numbers. This is followed by a clear and rigorous exposition of the statistical techniques and algorithms such as regression, neural networks, fuzzy logic, and expert systems. The book is also supported by an online computer program that allows readers to construct, validate, and run short and long term models.

  • Biodiesel Science and Technology

    From Soil to Oil
    • 1 Edición
    • Jan C.J. Bart + 2 más
    • Inglés
    Biodiesel production is a rapidly advancing field worldwide, with biodiesel fuel increasingly being used in compression ignition (diesel) engines. Biodiesel has been extensively studied and utilised in developed countries, and it is increasingly being introduced in developing countries, especially in regions with high potential for sustainable biodiesel production.Initial sections systematically review feedstock resources and vegetable oil formulations, including the economics of vegetable oil conversion to diesel fuel, with additional coverage of emerging energy crops for biodiesel production. Further sections review the transesterification process, including chemical (catalysis) and biochemical (biocatalysis) processes, with extended coverage of industrial process technology and control methods, and standards for biodiesel fuel quality assurance. Final chapters cover the sustainability, performance and environmental issues of biodiesel production, as well as routes to improve glycerol by-product usage and the development of next-generation products.Biodiesel science and technology: From soil to oil provides a comprehensive reference to fuel engineers, researchers and academics on the technological developments involved in improving biodiesel quality and production capacity that are crucial to the future of the industry.

  • Reservoir Engineering Handbook

    • 4 Edición
    • Tarek Ahmed
    • Inglés
    Reorganized for easy use, Reservoir Engineering Handbook, Fourth Edition provides an up-to-date reference to the tools, techniques, and science for predicting oil reservoir performance even in the most difficult fields. Topics covered in the handbook include: Processes to enhance production Well modification to maximize oil and gas recovery Completion and evaluation of wells, well testing, and well surveys Reservoir Engineering Handbook, Fourth Edition provides solid information and insight for engineers and students alike on maximizing production from a field in order to obtain the best possible economic return. With this handbook, professionals will find a valuable reference for understanding the key relationships among the different operating variables. Examples contained in this reference demonstrate the performance of processes under forceful conditions through a wide variety of applications.

  • Piping and Pipeline Calculations Manual

    Construction, Design Fabrication and Examination
    • 1 Edición
    • Philip Ellenberger
    • Inglés
    Piping and Pipeline Calculations Manual is a "no nonsense" guide to the principle intentions of the codes or standards and provides advice on compliance. After using this book the reader should come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The focus of the book is to enhance participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book is enhanced by a multitude of calculations to assist in problem solving, directly applying the rules and equations for specific design and operating conditions to illustrate correct applications. Each calculation is based on a specific code.

  • Solar Cell Device Physics

    • 2 Edición
    • Stephen J. Fonash
    • Inglés
    There has been an enormous infusion of new ideas in the field of solar cells over the last 15 years; discourse on energy transfer has gotten much richer, and nanostructures and nanomaterials have revolutionized the possibilities for new technological developments. However, solar energy cannot become ubiquitous in the world's power markets unless it can become economically competitive with legacy generation methods such as fossil fuels. The new edition of Dr. Stephen Fonash's definitive text points the way toward greater efficiency and cheaper production by adding coverage of cutting-edge topics in plasmonics, multi-exiton generation processes, nanostructures and nanomaterials such as quantum dots. The book's new structure improves readability by shifting many detailed equations to appendices, and balances the first edition's semiconductor coverage with an emphasis on thin-films. Further, it now demonstrates physical principles with simulations in the well-known AMPS computer code developed by the author.

  • Encyclopedia of Electrochemical Power Sources

    • 1 Edición
    • Jürgen Garche + 5 más
    • Inglés
    The Encyclopedia of Electrochemical Power Sources is a truly interdisciplinary reference for those working with batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemica... cells. With a focus on the environmental and economic impact of electrochemical power sources, this five-volume work consolidates coverage of the field and serves as an entry point to the literature for professionals and students alike.

  • Concise Encyclopedia of the History of Energy

    • 1 Edición
    • Cutler J. Cleveland
    • Inglés
    The Concise Encyclopedia of the History of Energy draws together in a single volume a comprehensive account of the field from the prestigious and award-winning Encyclopedia of Energy (2004). This volume covers all aspects of energy history with authoritative articles authoritatively contributed and edited by an interdisciplinary team of experts. Extensively revised since the original publication of they Encylopedia of Energy, this work describes the most interesting historical developments of the past five years in the energy sector.

  • LEED Practices, Certification, and Accreditation Handbook

    • 1 Edición
    • Sam Kubba
    • Inglés
    Adopted in the United States and a number of other countries, LEED certification is the recognized standard for measuring building sustainability. Achieving LEED personal certification or project certification is the best way to demonstrate that the project is truly "green." Written by an architect with over 30 years of international experience, this book provides architects, designers, building owners, and construction engineers with an easy to understand guide to the nuts and bolts of LEED project and personal certification. Written in plain and easy to understand language, this ?hands on? book is designed to assist readers with all aspects of LEED certification. The handbook follows the rigorous third-party commissioning process, beginning with basic LEED concepts, and then carefully explains LEED documentation and technical requirements along with its standards, professional accreditation, and codes. The handbook provides readers with design strategies for sustainable site selection, and design process for high performance building and commissioning. Other important topics include green materials and products selection as well as strategies for ensuring Indoor Environmental Quality (IEQ), water efficiency and sanitary waste disposal. This handbook also offers readers a multitude of forms with expert guidance for their completion.Clear and authoritative in scope, LEED Practices, Certification, and Accreditation Handbook provides architects, builders/owners, construction managers, and engineers with a reference that will help them to offer their clients, peers, and the public at large compelling proof that they have achieved their projects environmental goals and that the building is performing as designed.

  • Working Guide to Reservoir Engineering

    • 1 Edición
    • William Lyons
    • Inglés
    Working Guide to Reservoir Engineering provides an introduction to the fundamental concepts of reservoir engineering. The book begins by discussing basic concepts such as types of reservoir fluids, the properties of fluid containing rocks, and the properties of rocks containing multiple fluids. It then describes formation evaluation methods, including coring and core analysis, drill stem tests, logging, and initial estimation of reserves. The book explains the enhanced oil recovery process, which includes methods such as chemical flooding, gas injection, thermal recovery, technical screening, and laboratory design for enhanced recovery. Also included is a discussion of fluid movement in waterflooded reservoirs.

  • Working Guide to Petroleum and Natural Gas Production Engineering

    • 1 Edición
    • William Lyons
    • Inglés
    Working Guide to Petroleum and Natural Gas Production Engineering provides an introduction to key concepts and processes in oil and gas production engineering. It begins by describing correlation and procedures for predicting the physical properties of natural gas and oil. These include compressibility factor and phase behavior, field sampling process and laboratory measurements, and prediction of a vapor-liquid mixture. The book discusses the basic parameters of multiphase fluid flow, various flow regimes, and multiphase flow models. It explains the natural flow performance of oil, gas, and the mixture. The final chapter covers the design, use, function, operation, and maintenance of oil and gas production facilities; the design and construction of separators; and oil and gas separation and treatment systems.

  • Generating Electricity in a Carbon-Constrained World

    • 1 Edición
    • Fereidoon Sioshansi
    • Inglés
    The electric power sector is what keeps modern economies going, and historically, fossil fuels provided the bulk of the energy need to generate electricity, with coal a dominant player in many parts of the world. Now with growing concerns about global climate change, this historical dependence on fossil-fuels, especially those rich in carbon, are being questioned. Examining the implications of the industry's future in a carbon-constrained world, a distinct reality, is the subject of this book. Containing contributions from renowned scholars and academics from around the world, this book explores the various energy production options available to power companies in a carbon-constrained world. The three part treatment starts with a clear and rigorous exposition of the short term options including Clean Coal and Carbon Capture and Sequestration Technology, Coal, and Emission trading. Renewable energy options such as Nuclear Energy, Wind power, Solar power, Hydro-electric, and Geothermal energy are clearly explained along with their trade-offs and uncertainties inherent in evaluating and choosing different energy options and provides a framework for assessing policy solutions. This is followed by self-contained chapters of case-studies from all over the world. Other topics discussed in the book are Creating markets for tradable permits in the emerging carbon era, Global Action on Climate Change, The Impossibility of Staunching World CO2 Emissions and Energy efficiency.

  • Carbon Capture and Storage

    • 1 Edición
    • Steve A. Rackley
    • Inglés
    Carbon dioxide capture and storage (CCS) is a technology aimed at reducing greenhouse gas emissions from burning fossil fuels during industrial and energy-related processes. CCS involves the capture, transport and long-term storage of carbon dioxide, usually in geological reservoirs deep underground that would otherwise be released to the atmosphere. Carbon dioxide capture and storage offers important possibilities for making further use of fossil fuels more compatible with climate change mitigation policies. The largest volumes of CO2 could be captured from large point sources such as from power generation, which alone accounts for about 40 per cent of total anthropogenic CO2 emissions. The development of capture technologies in the power generation sector could be particularly important in view of the projected increase in demand for electricity in fast developing countries with enormous coal reserves (IEA 2002a). Although, this prospect is promising, more research is needed to overcome several hurdles such as important costs of capture technology and the match of large capture sources with adequate geological storage sites. The book will provide a comprehensive, detailed but non-specialist overview of the wide range of technologies involved in carbon dioxide capture and sequestration.

  • Advanced Natural Gas Engineering

    • 1 Edición
    • Xiuli Wang + 1 más
    • Inglés
    Natural gas is playing an increasing role in meeting world energy demands because of its abundance, versatility, and its clean burning nature. As a result, lots of new gas exploration, field development and production activities are under way, especially in places where natural gas until recently was labeled as “stranded”. Because a significant portion of natural gas reserves worldwide are located across bodies of water, gas transportation in the form of LNG or CNG becomes an issue as well. Finally natural gas is viewed in comparison to the recently touted alternatives. Therefore, there is a need to have a book covering all the unique aspects and challenges related to natural gas from the upstream to midstream and downstream. All these new issues have not been addressed in depth in any existing book. To bridge the gap, Xiuli Wang and Michael Economides have written a new book called Advanced Natural Gas Engineering. This book will serve as a reference for all engineers and professionals in the energy business. It can also be a textbook for students in petroleum and chemical engineering curricula and in training departments for a large group of companies.

  • Working Guide to Vapor-Liquid Phase Equilibria Calculations

    • 1 Edición
    • Tarek Ahmed
    • Inglés
    Working Guide to Vapor-Liquid Phase Equilibria Calculations offers a practical guide for calculations of vapor-phase equilibria. The book begins by introducing basic concepts such as vapor pressure, vapor pressure charts, equilibrium ratios, and flash calculations. It then presents methods for predicting the equilibrium ratios of hydrocarbon mixtures: Wilson's correlation, Standing's correlation, convergence pressure method, and Whitson and Torp correlation. The book describes techniques to determine equilibrium ratios of the plus fraction, including Campbell's method, Winn's method, and Katz's method. The remaining chapters cover the solution of phase equilibrium problems in reservoir and process engineering; developments in the field of empirical cubic equations of state (EOS) and their applications in petroleum engineering; and the splitting of the plus fraction for EOS calculations.

  • Dictionary of Energy

    Expanded Edition
    • 1 Edición
    • Cutler J. Cleveland + 1 más
    • Inglés
    Written by the editor of The Encyclopedia of Energy, Cutler Cleveland, Dictionary of Energy gives professionals across the multi-disciplinary field of energy a tool to better communicate on energy matters and understand energy issues and opportunities. This paperback edition, priced at less than half the price of the hardcover edition and expanded with over 500 new terms, makes this valuable reference available to an even wider audience beyond energy scientists, including new professionals, students, and corporate oil and gas companies.

  • Research on Energy Issues in China

    • 1 Edición
    • Jiang Zemin
    • Inglés
    China’s rapid economic expansion raises questions internally and externally about how it will acquire the energy it needs to sustain growth. Currently it is the largest producer and consumer of coal; how much will it continue to rely on its abundant natural resource in the face of increasing environmental concerns? Will it embrace new clean coal technologies developed by others or invest in its own? Currently it imports 50% of the oil it consumes; will it invest in technologies that scrub the ocean floor for petroleum deposits? Will it develop new distribution technologies to bring its natural gas reserves closer to population centers? What role will conservation play? And how will China relate to the rest of the international community as it addresses these critical issues. Research on Energy Issues In China presents one prominent insider’s view of China’s key energy issues and his strategy for addressing them. A collection of papers authored by Jiang Zemin, former president of the People’s Republic of China, it appears here in English for the first time. Jiang’s message is an exhortation to the Chinese to invest in science and technology, and research and development, to ensure the steady supply of energy so crucial for sustaining and driving development. He outlines this energy strategy for China: "we need to steadfastly conserve energy, use it efficiently, diversify development, keep the environment clean, be technology driven and cooperate internationally in order to establish a system of energy production, distribution and consumption that is highly efficient, uses advanced technology, produces few pollutant, has minimal impact on the ecosystem, and provides a steady and secure energy supply." Within ten to twenty years, China may well be the world’s largest energy consumption and supply system. This volume offers policy makers, energy industry analysts, researchers, and investors an inside view of how it plans to get there.

  • Nuclear Corrosion Modeling

    The Nature of CRUD
    • 1 Edición
    • Roy Castelli
    • Inglés
    Corrosion in nuclear power plants cause reductions in efficiency and increases in deposit build-up on plant surfaces, making for expensive maintentance and potential radiological health hazards. This book guides studies to predict and minimize corrosion, thus making nuclear power safer and more cost effective. Too often, reliance on empirical models and on-site testing of existing plants makes study and prediction of corrosive effects in nuclear reactors into a pricey and lengthy process. Introducing the experimental procedures, set up, sample preparation and computer modeling suggested in this book will save precious time and resources in a field where the significant time and expense to get and keep plants on-line are two of the chief concerns preventing broader commerical viability.

  • Enhanced Recovery Methods for Heavy Oil and Tar Sands

    • 1 Edición
    • James G. Speight
    • Inglés
    Recent oil price fluctuations continue to stress the need for more efficient recovery of heavy oil and tar sand bitumen resources. With conventional production steadily declining, advances in enhanced recovery will be required so that oil production can be extended and reservoirs last longer. A practical guide on heavy-oil related recovery methods is essential for all involved in heavy oil production. To feed this demand, James Speight, a well-respected scientist and author, provides a must-read for all scientists, engineers and technologists that are involved in production enhancement. In Enhanced Recovery Methods for Heavy Oil and Tar Sands, Speight provides the current methods of recovery for heavy oil and tar sand bitumen technology, broken down by thermal and non-thermal methods. An engineer, graduate student or professional working with heavy oil, upcoming and current, will greatly benefit from this much-needed text.

  • Solar Energy Engineering

    Processes and Systems
    • 1 Edición
    • Soteris A Kalogirou
    • Inglés
    As perhaps the most promising of all the renewable energy sources available today, solar energy is becoming increasingly important in the drive to achieve energy independence and climate balance. This new book is the masterwork from world-renowned expert Dr. Soteris Kalogirou, who has championed solar energy for decades. The book includes all areas of solar energy engineering, from the fundamentals to the highest level of current research. The author includes pivotal subjects such as solar collectors, solar water heating, solar space heating and cooling, industrial process heat, solar desalination, photovoltaics, solar thermal power systems, and modeling of solar systems, including the use of artificial intelligence systems in solar energy systems, modeling and performance prediction.

  • Micro Fuel Cells

    Principles and Applications
    • 1 Edición
    • Tim Zhao
    • Inglés
    Today's consumers of portable electronics consumers are demanding devices not only deliver more power but also work healthy for the environment. This fact alone has lead major corporations like Intel, BIC, Duracell and Microsoft to believe that Microfuel Cells could be the next-generation power source for electronic products. Compact and readable, Microfuels Principles and Applications, offers engineers and product designers a reference unsurpassed by any other in the market. The book starts with a clear and rigorous exposition of the fundamentals engineering principles governing energy conversion for small electronic devices, followed by self-contained chapters concerning applications. The authors provide original points of view on all types of commercially available micro fuel cells types, including micro proton exchange membrane fuel cells, micro direct methanol fuel cells, micro solid oxide fuel cells and micro bio-fuel cells. The book also contains a detailed introduction to the fabrication of the components and the assembly of the system, making it a valuable reference both in terms of its application to product design and understanding micro engineering principles.

  • Energy Optimization in Process Systems

    • 1 Edición
    • Stanislaw Sieniutycz + 1 más
    • Inglés
    Despite the vast research on energy optimization and process integration, there has to date been no synthesis linking these together. This book fills the gap, presenting optimization and integration in energy and process engineering. The content is based on the current literature and includes novel approaches developed by the authors. Various thermal and chemical systems (heat and mass exchangers, thermal and water networks, energy converters, recovery units, solar collectors, and separators) are considered. Thermodynamics, kinetics and economics are used to formulate and solve problems with constraints on process rates, equipment size, environmental parameters, and costs. Comprehensive coverage of dynamic optimization of energy conversion systems and separation units is provided along with suitable computational algorithms for deterministic and stochastic optimization approaches based on: nonlinear programming, dynamic programming, variational calculus, Hamilton-Jacobi-Bell... theory, Pontryagin's maximum principles, and special methods of process integration. Integration of heat energy and process water within a total site is shown to be a significant factor reducing production costs, in particular costs of utilities for the chemical industry. This integration involves systematic design and optimization of heat exchangers and water networks (HEN and WN). After presenting basic, insight-based Pinch Technology, systematic, optimization-based sequential and simultaneous approaches to design HEN and WN are described. Special consideration is given to the HEN design problem targeting stage, in view of its importance at various levels of system design. Selected, advanced methods for HEN synthesis and retrofit are presented. For WN design a novel approach based on stochastic optimization is described that accounts for both grassroot and revamp design scenarios.

  • Renewable Energy Focus e-Mega Handbook

    • 1 Edición
    • Bent Sorensen + 15 más
    • Inglés
    A one-stop Desk Reference, for engineers involved in renewable energies; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the field. Material ranges from basic to advanced topics

  • Proceedings of the 1st Annual Gas Processing Symposium

    10-12 January, 2009 - Qatar
    • 1 Edición
    • Volumen 1
    • Hassan E. Alfadala + 2 más
    • Inglés
    As the cleanest source of fossil energy with the most advantageous CO2 footprint, natural gas continues to increase its share in the global energy market. This book provides state-of-the-art contributions in the area of gas processing. Special emphasis is given to Liquified Natural Gas (LNG); the book also covers the following gas processing applications in parallel sessions:* Natural Gas processing and treatment * Gas To Power and water* Gas To Liquid (GTL)* Gas To Petrochemicals, including olefins, ammonia and methanol

  • Materials for Fuel Cells

    • 1 Edición
    • M Gasik
    • Inglés
    A fuel cell is an electrochemical device that converts the chemical energy of a reaction (between fuel and oxidant) directly into electricity. Given their efficiency and low emissions, fuel cells provide an important alternative to power produced from fossil fuels. A major challenge in their use is the need for better materials to make fuel cells cost-effective and more durable. This important book reviews developments in materials to fulfil the potential of fuel cells as a major power source.After introductory chapters on the key issues in fuel cell materials research, the book reviews the major types of fuel cell. These include alkaline fuel cells, polymer electrolyte fuel cells, direct methanol fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells and regenerative fuel cells. The book concludes with reviews of novel fuel cell materials, ways of analysing performance and issues affecting recyclability and life cycle assessment.With its distinguished editor and international team of contributors, Materials for fuel cells is a valuable reference for all those researching, manufacturing and using fuel cells in such areas as automotive engineering.

  • Analytical Methods for Energy Diversity and Security

    Portfolio Optimization in the Energy Sector: A Tribute to the work of Dr. Shimon Awerbuch
    • 1 Edición
    • Morgan Bazilian + 1 más
    • Inglés
    Analytical Methods for Energy Diversity and Security is an ideal volume for professionals in academia, industry and government interested in the rapidly evolving area at the nexus between energy and climate change policy. The cutting-edge international contributions allow for a wide coverage of the topic. Analytical Methods for Energy Diversity and Security focuses on the consideration of financial risk in the energy sector. It describes how tools borrowed from financial economic theory, in particular mean-variance portfolio theory, can provide insights on the costs and benefits of diversity, and thus inform investment decision making in conditions of uncertainty. It gives the reader an in-depth understanding of how to manage risk at a time when the world’s focus is on this area. The book provides insights from leading authorities in the area of energy security. It gives readers abundant, rigorous analysis and guidance at a critical time in facing the twin challenges of energy security and climate change. The book also highlights the role of clean energy technology in moving towards future diverse and intelligent electricity systems. It will be a trusted, first point of reference for decision-makers in the field of energy policy. The book includes a foreword by the 2007 Nobel Peace Prize winner. All royalties from sale of this book will be donated to charities working in the energy sector in the developing world.

  • Solid-State Hydrogen Storage

    Materials and Chemistry
    • 1 Edición
    • Gavin Walker
    • Inglés
    Hydrogen fuel cells are emerging as a major alternative energy source in transportation and other applications. Central to the development of the hydrogen economy is safe, efficient and viable storage of hydrogen. Solid-state hydrogen storage: Materials and chemistry reviews the latest developments in solid-state hydrogen storage.Part one discusses hydrogen storage technologies, hydrogen futures, hydrogen containment materials and solid-state hydrogen storage system design. Part two reviews the analysis of hydrogen interactions including structural characterisation of hydride materials, neutron scattering techniques, reliably measuring hydrogen uptake in storage materials and modelling of carbon-based materials for hydrogen storage. Part three analyses physically-bound hydrogen storage with chapters on zeolites, carbon nanostructures and metal-organic framework materials. Part four examines chemically-bound hydrogen storage including intermetallics, magnesium hydride, alanates, borohydrides, imides and amides, multicomponent hydrogen storage systems, organic liquid carriers, indirect hydrogen storage in metal ammines and technological challenges in hydrogen storage.With its distinguished editor and international team of contributors, Solid-state hydrogen storage: Materials and chemistry is a standard reference for researchers and professionals in the field of renewable energy, hydrogen fuel cells and hydrogen storage.

  • Battery Operated Devices and Systems

    From Portable Electronics to Industrial Products
    • 1 Edición
    • Gianfranco Pistoia
    • Inglés
    Battery Operated Devices and Systems provides a comprehensive review of the essentials of batteries and battery applications as well as state-of-the-art technological developments. The book covers the most recent trends, especially for the ubiquitous lithium ion batteries. It lays particular emphasis on the power consumption of battery operated devices and systems and the implications for battery life and runtime. Battery management is also dealt with in detail, particularly as far as the charging methods are concerned, along with the criteria of battery choice. This book describes a variety of portable and industrial applications and the basic characteristics of all primary and secondary batteries used in these applications. Portable applications include mobile phones, notebook computers, cameras, camcorders, personal digital assistants, medical instruments, power tools, and portable GPS. Industrial applications range from aerospace and telecommunications to emergency systems, load levelling, energy storage, toll collection, different meters, data loggers, oil drilling, oceanography, and meteorology. The book also discusses wireless connectivity, i.e. Wi-Fi, Bluetooth and Zigbee, and concludes with some market considerations. Links to further reading are provided through the 275 references. This book will be a valuable information source for researchers interested in devices and systems drawing power from batteries. It will also appeal to graduates working in research institutions; universities and industries dealing with power sources and energy conversion; civil, electrical and transport engineers; and chemists.

  • Applied Coal Petrology

    The Role of Petrology in Coal Utilization
    • 1 Edición
    • Isabel Suarez-Ruiz + 1 más
    • Inglés
    This book is an integrated approach towards the applications of coal (organic) petrology and discusses the role of this science in the field of coal and coal-related topics. Coal petrology needs to be seen as a continuum of organic (macerals) and inorganic (minerals and trace elements) contributions to the total coal structure, with the overprint of coal rank. All this influences the behavior of coal in utilization, the coal by-products, the properties of coal as a reservoir for methane or a sequestration site for carbon dioxide, and the relationships of coal utilization with health and environmental issues. The interaction of coal properties and coal utilization begins at the mine face. The breakage of the coal in mining influences its subsequent beneficiation. Beneficiation is fundamental to the proper combustion of coal and is vital to the preparation of the feedstock for the production of metallurgical coke. An understanding of basic coal properties is important for achieving reductions in trace element emissions and improving the efficiency of combustion and combined-cycle gasification. The production of methane from coal beds is related to the properties of the in situ coal. Similarly, coal bed sequestration of carbon dioxide produced from combustion is dependent on the reservoir properties. Environmental problems accompany coal on its way from the mine to the point of utilization and beyond. Health aspects related with coal mining and coal utilization are also included because, in planning for coal use, it is impossible to separate environmental and health issues from the discussion of coal utilization. The book is aimed at a wide audience, ranging from researchers, lecturers and students to professionals in industry and discusses issues (such as the environmental, and health) that are of concern to the general public as a whole.

  • Future Energy

    Improved, Sustainable and Clean Options for our Planet
    • 1 Edición
    • Trevor Letcher
    • Inglés
    Future Energy will allow us to make reasonable, logical and correct decisions on our future energy as a result of two of the most serious problems that the civilized world has to face; the looming shortage of oil (which supplies most of our transport fuel) and the alarming rise in atmospheric carbon dioxide over the past 50 years (resulting from the burning of oil, gas and coal and the loss of forests) that threatens to change the world’s climate through global warming. Future Energy focuses on all the types of energy available to us, taking into account a future involving a reduction in oil and gas production and the rapidly increasing amount of carbon dioxide in our atmosphere. It is unique in the genre of books of similar title in that each chapter has been written by a scientist or engineer who is an expert in his or her field. The book is divided into four sections: Traditional Fossil Fuel and Nuclear Energy Renewable Energy Potentially Important New Types of Energy New Aspects to Future Energy Usage Each chapter highlights the basic theory and implementation, scope, problems and costs associated with a particular type of energy. The traditional fuels are included because they will be with us for decades to come - but, we hope, in a cleaner form. The renewable energy types includes wind power, wave power, tidal energy, two forms of solar energy, bio-mass, hydroelectricity, geothermal and the hydrogen economy. Potentially important new types of energy include: pebble bed nuclear reactors, nuclear fusion, methane hydrates and recent developments in fuel cells and batteries.

  • Wettability

    • 1 Edición
    • Erle C. Donaldson + 1 más
    • Inglés
    The wettability of oil reservoirs is the most important factor controlling the rate of oil recovery, providing a profound effect on petroleum production. The petroleum industry has increased the research effort on wettability, but, so far, there has never been a comprehensive book on the topic. This is the first book to go through all of the major research and applications on wettability, capillary pressure and improved recovery. Critical topics including core preservation, the effect of wettability on relative permeability, surface forces such as van der Waals equation of state, petroleum traps and pore size effects are all included in this musthave handbook. Deciphering the techniques and examples will increase the efficiency and production of oil recovery, translating to stronger reservoir simulations and improved well production.

  • Combustion Engineering Issues for Solid Fuel Systems

    • 1 Edición
    • Bruce G. Miller + 1 más
    • Inglés
    Design, construct and utilize fuel systems using this comprehensive reference work. Combustion Engineering Issues for Solid Fuel Systems combines modeling, policy/regulation and fuel properties with cutting edge breakthroughs in solid fuel combustion for electricity generation and industrial applications. This book moves beyond theory to provide readers with real-life experiences and tips for addressing the various technical, operational and regulatory issues that are associated with the use of fuels. With the latest information on CFD modeling and emission control technologies, Combustion Engineering Issues for Solid Fuel Systems is the book practicing engineers as well as managers and policy makers have been waiting for.

  • PEM Fuel Cell Modeling and Simulation Using Matlab

    • 1 Edición
    • Colleen Spiegel
    • Inglés
    Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money.Easy to read and understand, this book provides design and modelling tips for fuel cell components such as: modelling proton exchange structure, catalyst layers, gas diffusion, fuel distribution structures, fuel cell stacks and fuel cell plant. This book includes design advice and MATLAB and FEMLAB codes for Fuel Cell types such as: polymer electrolyte, direct methanol and solid oxide fuel cells. This book also includes types for one, two and three dimensional modeling and two-phase flow phenomena and microfluidics.

  • Generating Power at High Efficiency

    Combined Cycle Technology for Sustainable Energy Production
    • 1 Edición
    • E Jeffs
    • Inglés
    Combined cycle technology is used to generate power at one of the highest levels of efficiency of conventional power plants. It does this through primary generation from a gas turbine coupled with secondary generation from a steam turbine powered by primary exhaust heat. Generating power at high efficiency thoroughly charts the development and implementation of this technology in power plants and looks to the future of the technology, noting the advantages of the most important technical features – including gas turbines, steam generator, combined heat and power and integrated gasification combined cycle (IGCC) – with their latest applications.

  • Hydrocarbon Exploration and Production

    • 2 Edición
    • Volumen 55
    • Frank Jahn + 2 más
    • Inglés
    Hydrocarbon Exploration and Production, Second Edition is a comprehensive and current introduction to the upstream industry, drawing together the many inter-disciplinary links within the industry. It presents all the major stages in the life of an oil or gas field, from gaining access to opportunity, through exploration, appraisal, development planning, production, and finally to decommissioning. It also explains the fiscal and commercial environment in which oil and gas field development takes place. The book is written for industry professionals who wish to be better informed about the basic technical and commercial methods, concepts and techniques used in the upstream oil and gas business. The authors are the founders of TRACS International, a company which has provided training and consultancy in Exploration and Production related issues for many clients world-wide since 1992.

  • Urban Energy Transition

    From Fossil Fuels to Renewable Power
    • 1 Edición
    • Peter Droege
    • Peter Droege
    • Inglés
    This compendium of 29 chapters from 18 countries contains both fundamental and advanced insight into the inevitable shift from cities dominated by the fossil-fuel systems of the industrial age to a renewable-energy based urban development framework. The cross-disciplinary handbook covers a range of diverse yet relevant topics, including: carbon emissions policy and practice; the role of embodied energy; urban thermal performance planning; building efficiency services; energy poverty alleviation efforts; renewable community support networks; aspects of household level bio-fuel markets; urban renewable energy legislation, programs and incentives; innovations in individual transport systems; global urban mobility trends; implications of intelligent energy networks and distributed energy supply and storage; and the case for new regional monetary systems and lifestyles. Presented are practical and principled aspects of technology, economics, design, culture and society, presenting perspectives that are both local and international in scope and relevance.

  • Gasification

    • 2 Edición
    • Christopher Higman + 1 más
    • Inglés
    Gasification is a process that if properly utilized can transform the world in which we live. Comprehensive in its coverage, this second edition continues the tradition of the first by providing engineers and scientists with an up-to-date overview of commercial processes and applications relevant to today's demands. Gasification, 2nd edition is expanded and provides more detail on the integration issues for current generation, state-of-the-art Integrated Gasification Combined Cycles (IGCC); CO2 capture in the IGCC context addressing the issues of pre-investment and retrofitting as well as defining what the term "CO2 capture ready" might mean in practice; issues of plant reliability, availability and maintainability (RAM) including as evaluation of feedback from existing plants; implementation of fuel cell technology in IGCC concepts. All statistics, processes and projects, including descriptions of a number of processes not covered in the previous edition.

  • Power Quality in Power Systems and Electrical Machines

    • 1 Edición
    • Ewald F. Fuchs + 1 más
    • Inglés
    Power Quality in Power Systems and Electrical Machines, Second Edition helps readers understand the causes and effects of power quality problems and provides techniques to mitigate these problems. Power quality is a measure of deviations in supply systems and their components, and affects all connected electrical and electronic equipment, including computers, TV monitors, and lighting. In this book analytical and measuring techniques are applied to power quality problems as they occur in central power stations and distributed generation such as alternative power systems.

  • Competitive Electricity Markets

    Design, Implementation, Performance
    • 1 Edición
    • Fereidoon Sioshansi
    • Inglés
    After 2 decades, policymakers and regulators agree that electricity market reform, liberalization and privatization remains partly art. Moreover, the international experience suggests that in nearly all cases, initial market reform leads to unintended consequences or introduces new risks, which must be addressed in subsequent “reform of the reforms.” Competitive Electricity Markets describes the evolution of the market reform process including a number of challenging issues such as infrastructure investment, resource adequacy, capacity and demand participation, market power, distributed generation, renewable energy and global climate change.

  • Fundamentals of Nuclear Reactor Physics

    • 1 Edición
    • Elmer E. Lewis
    • Inglés
    Fundamentals of Nuclear Reactor Physics offers a one-semester treatment of the essentials of how the fission nuclear reactor works, the various approaches to the design of reactors, and their safe and efficient operation . It provides a clear, general overview of atomic physics from the standpoint of reactor functionality and design, including the sequence of fission reactions and their energy release. It provides in-depth discussion of neutron reactions, including neutron kinetics and the neutron energy spectrum, as well as neutron spatial distribution. It includes ample worked-out examples and over 100 end-of-chapter problems. Engineering students will find this applications-oriente... approach, with many worked-out examples, more accessible and more meaningful as they aspire to become future nuclear engineers.

Temas relacionados