Saltar al contenido principal
Elsevier

Libros en Matemáticas

  • Computing for Architects

    • 1 Edición
    • R. A. Reynolds
    • Inglés
    Computing for Architects provides an introduction to computers and their use in architectural offices. It is the result of 17 years' experience of using computers in firms in private practice and is intended to be more of a practical guide than a textbook. It attempts to show where computers can help, how they can be applied, and how to avoid the worst pitfalls. The book begins by describing how the attitudes of architects towards computers have changed over the years. This is followed by separate chapters on the benefits and drawbacks of using computers; different types of computers and computer programs; the principles and operations of databases; and their application in architectural design. Subsequent chapters discuss computer-aided drafting, computer visualization, job management systems, and design-aid programs. The importance of environmental analysis is emphasized, covering lighting analysis, thermal analysis, sunlight analysis, airconditioning analysis, and acoustical analysis. The final chapters deal with office management systems and the future of computing.

  • Parametric Statistical Inference

    Basic Theory and Modern Approaches
    • 1 Edición
    • Shelemyahu Zacks
    • V. Lakshmikantham + 1 más
    • Inglés
    Parametric Statistical Inference: Basic Theory and Modern Approaches presents the developments and modern trends in statistical inference to students who do not have advanced mathematical and statistical preparation. The topics discussed in the book are basic and common to many fields of statistical inference and thus serve as a jumping board for in-depth study. The book is organized into eight chapters. Chapter 1 provides an overview of how the theory of statistical inference is presented in subsequent chapters. Chapter 2 briefly discusses statistical distributions and their properties. Chapter 3 is devoted to the problem of sufficient statistics and the information in samples, and Chapter 4 presents some basic results from the theory of testing statistical hypothesis. In Chapter 5, the classical theory of estimation is developed. Chapter 6 discusses the efficiency of estimators and some large sample properties, while Chapter 7 studies the topics on confidence intervals. Finally, Chapter 8 is about decision theoretic and Bayesian approach in testing and estimation. Senior undergraduate and graduate students in statistics and mathematics, and those who have taken an introductory course in probability will highly benefit from this book.

  • Computational Methods in Nonlinear Structural and Solid Mechanics

    Papers Presented at the Symposium on Computational Methods in Nonlinear Structural and Solid Mechanics
    • 1 Edición
    • Ahmed K. Noor + 1 más
    • Inglés
    Computational Methods in Nonlinear Structural and Solid Mechanics covers the proceedings of the Symposium on Computational Methods in Nonlinear Structural and Solid Mechanics. The book covers the development of efficient discretization approaches; advanced numerical methods; improved programming techniques; and applications of these developments to nonlinear analysis of structures and solids. The chapters of the text are organized into 10 parts according to the issue they tackle. The first part deals with nonlinear mathematical theories and formulation aspects, while the second part covers computational strategies for nonlinear programs. Part 3 deals with time integration and numerical solution of nonlinear algebraic equations, while Part 4 discusses material characterization and nonlinear fracture mechanics, and Part 5 tackles nonlinear interaction problems. The sixth part discusses seismic response and nonlinear analysis of concrete structure, and the seventh part tackles nonlinear problems for nuclear reactors. Part 8 covers crash dynamics and impact problems, while Part 9 deals with nonlinear problems of fibrous composites and advanced nonlinear applications. The last part discusses computerized symbolic manipulation and nonlinear analysis software systems. The book will be of great interest to numerical analysts, computer scientists, structural engineers, and other professionals concerned with nonlinear structural and solid mechanics.

  • The Mathematical Basis of the UNIURF CAD System

    • 1 Edición
    • Pierre Bézier
    • Inglés
    The Mathematical Basis of the UNISURF CAD System deals with the mathematics involved in the use of the UNISURF CAD System. The book is divided into five chapters. Chapters 1 and 2 deal with the basic principles, expression of a point, and hodographs of curves and patches. Chapters 3 and 4 deal with the volume and parametric transformations of curves and patches, and Chapter 5 covers the general and special cases of blending. The text is recommended for mathematicians and designers who would like to know more about the mathematical aspect of the UNISURF CAD system.

  • Vectors

    A Survey of Molecular Cloning Vectors and Their Uses
    • 1 Edición
    • Raymond L. Rodriguez + 1 más
    • Inglés
    Vectors: A Survey of Molecular Cloning Vectors and Their Uses focuses on the functions of molecular cloning vectors. The book first discusses bacterial plasmid pBR322. Topics include criteria for plasmid vector design, construction and structure, transcriptional signals, DNA replication, recombination, mobilization, and plasmid stability. The text also examines bacteriophage lambda cloning vectors; filamentous phages as cloning vectors; chimeric single-stranded DNA phage-plasmid cloning vectors; and phage-plasmid hybrid vectors. The selection discusses cosmids and plasmid positive selection vectors, including library and construction, cosmid rescue, and positive selection vectors using plasmid-encoded lethal function. The text also examines vectors for regulating expression of cloned DNA, including lambda promoters, secretion vectors, and protein fusion vectors. The book takes a look at vectors with adjustable copy numbers. Copy number and protein production; adjustable copy number vectors; future expression vectors; rate-limiting steps of protein production; and promoters and ribosome binding sites are explained. The text puts emphasis on vectors for the synthesis of specific RNAs in vitro and cloning vectors for gram-positive bacteria. The selection is a valuable source of data for readers interested in molecular cloning vectors.

  • Fundamentals of Statistics

    • 1 Edición
    • H. Mulholland + 1 más
    • Inglés
    Fundamentals of Statistics covers topics on the introduction, fundamentals, and science of statistics. The book discusses the collection, organization and representation of numerical data; elementary probability; the binomial Poisson distributions; and the measures of central tendency. The text describes measures of dispersion for measuring the spread of a distribution; continuous distributions for measuring on a continuous scale; the properties and use of normal distribution; and tests involving the normal or student's ‘t’ distributions. The use of control charts for sample means; the ranges and fraction defective; the chi-squared distribution; the F distribution; and the bivariate distributions are also considered. The book deals with the idea of mathematical expectation and its relationship with mean, variance, and covariance, as well as weighted averages, death rates, and time series. Students studying for advanced level education or higher national certificates in Mechanical or Electrical Engineering, Mathematics, Chemistry, Biology, or Pharmacy, as well as university students taking such courses will find the book invaluable.

  • Proceedings of the Eighth Power Systems Computation Conference

    Helsinki, 19-24 August 1984
    • 1 Edición
    • Committee 8th Pwr Sys Comp Conf
    • Inglés

  • Ocean Tides

    Mathematical Models and Numerical Experiments
    • 1 Edición
    • G. I. Marchuk + 1 más
    • Inglés
    Ocean Tides: Mathematical Models and Numerical Experiments discusses the mathematical concepts involved in understanding the behavior of oceanic tides. The book utilizes mathematical models and equations to interpret physical peculiarities of tidal generation. The text first presents the essential information on the theory of tide, and then proceeds to tackling the studies on the equations of tidal dynamics. Next, the book covers the numerical methods for the solution of the equations of tidal dynamics. Chapter 4 deals with the tides in the World Ocean, while Chapter 5 talks about the bottom boundary layer in tidal flows. The last chapter tackles the vertical structure of internal tidal waves. The book will be of great interest to individuals whose profession involves the direct interaction with tides, such as mariners, marine biologists, and oceanographers.

  • Computer Security

    • 2 Edición
    • John M. Carroll
    • Inglés
    Computer Security, Second Edition aims to present different ideas and practices that promote the prevention of attacks on computer systems and data being compromised. The book is divided into five parts. Part I covers the important elements of computer security and case histories of computer-related crimes. Part II discusses the organizations and models for the protection of information. Part III talks about the physical security involved and access control involved in data protection. Part IV deals with the different measures employed to promote security in the communication between computers. Part V explains systems security, its access control, and integrity. The text is recommended for people involved in the promotion of computer security, especially programmers and IT practitioners, in institutions where computer-processed information is crucial and must be protected.

  • The Computer Graphics Metafile

    Butterworth Series in Computer Graphics Standards
    • 1 Edición
    • L.R. Henderson + 1 más
    • B. Shepherd + 1 más
    • Inglés
    The Computer Graphics Metafile deals with the Computer Graphics Metafile (CGM) standard and covers topics ranging from the structure and contents of a metafile to CGM functionality, metafile elements, and real-world applications of CGM. Binary Encoding, Character Encoding, application profiles, and implementations are also discussed. This book is comprised of 18 chapters divided into five sections and begins with an overview of the CGM standard and how it can meet some of the requirements for storage of graphical data within a graphics system or application environment. The reader is then introduced to the practice of using the CGM and the nature of the CGM, its aims, and what is defined in the standard. The following chapters focus on the players, the rules, and the game; the abstract functionality of the CGM; descriptor elements for metafiles and pictures; coordinates, primitives, and attributes; and encodings and implementation considerations. Clear Text Encoding, Binary Encoding, Character Encoding, and application profiles are also explored. The final chapter looks at the use of GKS, GKS-3D, and PHIGS to generate and interpret CGMs. This monograph will be a valuable resource for computer graphics students and professionals as well as software engineers and computer programmers.

  • Introduction to Dynamic Programming

    International Series in Modern Applied Mathematics and Computer Science, Volume 1
    • 1 Edición
    • Leon Cooper + 1 más
    • E. Y. Rodin
    • Inglés
    Introduction to Dynamic Programming provides information pertinent to the fundamental aspects of dynamic programming. This book considers problems that can be quantitatively formulated and deals with mathematical models of situations or phenomena that exists in the real world. Organized into 10 chapters, this book begins with an overview of the fundamental components of any mathematical optimization model. This text then presents the details of the application of dynamic programming to variational problems. Other chapters consider the application of dynamic programming to inventory theory, Markov processes, chemical engineering, optimal control theory, calculus of variations, and economics. This book discusses as well the approach to problem solving that is typical of dynamic programming. The final chapter deals with a number of actual applications of dynamic programming to practical problems. This book is a valuable resource for .graduate level students of mathematics, economics, statistics, business, operations research, industrial engineering, or other engineering fields.

  • Distributed Computer Control Systems 1982

    Proceedings of the Fourth IFAC Workshop, Tallinn, U.S.S.R., 24-26 May 1982
    • 1 Edición
    • R. W. Gellie + 1 más
    • Inglés
    Distributed Computer Control Systems 1982 focuses on the emerging trends in different areas on the use of computers. The text gives emphasis on computer programming, multiprocessor computer systems, and control systems that are considered important in the use of computers. The book presents various studies on how parallelization can affect the function of multiprocessor computer systems; the initiative being carried out by standardization groups involved in local area communication in improving distributed computer control systems; and how the sensor-base-manageme... aids in distributed computer systems architecture. The text also presents studies on the analysis and development of protocols among distributed computer networks; how a distributed computer control system can efficiently work in a plant setting; and the problems associated with the design and implementation of this system and ways to solve them. The monograph is a great find for those who are involved and interested in computer engineering, computer programming, and in the design, implementation, and control of computer systems.

  • Computers and Informatics in Developing Countries

    The First Generation
    • 1 Edición
    • D.B. Arnold + 1 más
    • Inglés
    ISO Standards for Computer Graphics: The First Generation discusses the expected standards in the quality of computer graphics; the aspects and examples of said standards; and the materials from the standards being described. The book is divided into six parts. Part 1 covers topics such as the applicability of first-generation ISO standards; software architecture; application program interface, device interface, metafile, archive, and language binding standards; and the ISO and its related bodies. Part 2 deals with topics such as output primitives and attributes, coordinate systems, and storage mechanisms. The third part talks about language bindings, encodings, and formal specifications. The fourth part tackles validation and testing; conformance testing of graphic standards; and the registration of graphical items. The book also discusses the status and future direction of ISO standards for computer graphics; it also presents in the last part the bibliography of the included topics, glossary on related bodies, and the formal specification of a part of GKS. The text is recommended for computer engineers, IT experts, and graphic designers who would like to know the ISO standards for computer graphics and its implications in their practice.

  • Computers and Informatics in Developing Countries

    • 1 Edición
    • Mohan Munasinghe
    • Inglés
    Computers and Informatics in Developing Countries is a collection of papers documenting the conference of the Expert Group on Computers and Informatics for Development which investigates how the international scientific and development community can assist developing countries in using computer and informatics technology to promote progress and growth. The papers address the need for developing countries to formulate and apply computer and informatics policies for development, as well as the role of an International Centre for Computers and Informatics (ICCI) should play in the development process. The ICCI should be based on the network principle that links other regional and national computer centers. The advantages of the network principle are lower startup costs, avoidance of setting up a large organization, and localized services of needs. An international organization similar to ICCI can accelerate Third World developmental efforts following the identification of needs of developing countries as regards computer and informatics, setting of clear objectives of ICCI, and meeting with potential donors. The collection is suitable for heads of both non-government agencies and government departments involved in international aid, education, or development, and also to administrators of educational institutions and philanthropic organizations.

  • Numerical Methods in Software and Analysis

    • 2 Edición
    • John R. Rice
    • Inglés
    Numerical Methods, Software, and Analysis, Second Edition introduces science and engineering students to the methods, tools, and ideas of numerical computation. Introductory courses in numerical methods face a fundamental problem—there is too little time to learn too much. This text solves that problem by using high-quality mathematical software. In fact, the objective of the text is to present scientific problem solving using standard mathematical software. This book discusses numerous programs and software packages focusing on the IMSL library (including the PROTRAN system) and ACM Algorithms. The book is organized into three parts. Part I presents the background material. Part II presents the principal methods and ideas of numerical computation. Part III contains material about software engineering and performance evaluation. A uniform approach is used in each area of numerical computation. First, an intuitive development is made of the problems and the basic methods for their solution. Then, relevant mathematical software is reviewed and its use outlined. Many areas provide extensive examples and case studies. Finally, a deeper analysis of the methods is presented as in traditional numerical analysis texts.

  • Optimization Techniques in Statistics

    • 1 Edición
    • Jagdish S. Rustagi
    • Inglés
    Statistics help guide us to optimal decisions under uncertainty. A large variety of statistical problems are essentially solutions to optimization problems. The mathematical techniques of optimization are fundamentalto statistical theory and practice. In this book, Jagdish Rustagi provides full-spectrum coverage of these methods, ranging from classical optimization and Lagrange multipliers, to numerical techniques using gradients or direct search, to linear, nonlinear, and dynamic programming using the Kuhn-Tucker conditions or the Pontryagin maximal principle. Variational methods and optimization in function spaces are also discussed, as are stochastic optimization in simulation, including annealing methods. The text features numerous applications, including:Finding maximum likelihood estimatesMarkov decision processesProgramming methods used to optimize monitoring of patients in hospitalsDerivation of the Neyman-Pearson lemmaThe search for optimal designsSimulation of a steel millSuitable as both a reference and a text, this book will be of interest to advanced undergraduate or beginning graduate students in statistics, operations research, management and engineering sciences, and related fields. Most of the material can be covered in one semester by students with a basic background in probability and statistics.

  • Geometric Measure Theory

    A Beginner's Guide
    • 2 Edición
    • Frank Morgan
    • Inglés
    Geometric measure theory is the mathematical framework for the study of crystal growth, clusters of soap bubbles, and similar structures involving minimization of energy. Morgan emphasizes geometry over proofs and technicalities, and includes a bibliography and abundant illustrations and examples. This Second Edition features a new chapter on soap bubbles as well as updated sections addressing volume constraints, surfaces in manifolds, free boundaries, and Besicovitch constant results. The text will introduce newcomers to the field and appeal to mathematicians working in the field.

  • Introduction to Biostatistics

    A Guide to Design, Analysis and Discovery.
    • 1 Edición
    • Ronald N. Forthofer + 1 más
    • Inglés
    The Biostatistics course is often found in the schools of public Health, medical schools, and, occasionally, in statistics and biology departments. The population of students in these courses is a diverse one, with varying preparedness. The book assumes the reader has at least two years of high school algebra, but no previous exposure to statistics is required.Written for individuals who might be fearful of mathematics, this book minimizes the technical difficulties and emphasizes the importance of statistics in scientific investigation. An understanding of underlying design and analysis is stressed. The limitations of the research, design and analytical techniques are discussed, allowing the reader to accurately interpret results. Real data, both processed and raw, are used extensively in examples and exercises. Statistical computing packages - MINITAB, SAS and Stata - are integrated. The use of the computer and software allows a sharper focus on the concepts, letting the computer do the necessary number-crunching.

  • Handbook of Mathematical Formulas and Integrals

    • 1 Edición
    • Alan Jeffrey
    • Inglés
    If there is a formula to solve a given problem in mathematics, you will find it in Alan Jeffrey's Handbook of Mathematical Formulas and Integrals. Thanks to its unique thumb-tab indexing feature, answers are easy to find based upon the type of problem they solve. The Handbook covers important formulas, functions, relations, and methods from algebra, trigonometric and exponential functions, combinatorics, probability, matrix theory, calculus and vector calculus, both ordinary and partial differential equations, Fourier series, orthogonal polynomials, and Laplace transforms. Based on Gradshteyn and Ryzhik's Table of Integrals, Series, and Products, Fifth Edition (edited by Jeffrey), but far more accessible and written with particular attention to the needs of students and practicing scientists and engineers, this book is an essential resource. Affordable and authoritative, it is the first place to look for help and a rewarding place to browse.

  • Further Computer Appreciation

    • 1 Edición
    • T. F. Fry
    • Inglés
    Further Computer Appreciation is a comprehensive cover of the principles and aspects in computer appreciation. The book starts by describing the development of computers from the first to the third computer generations, to the development of processors and storage systems, up to the present position of computers and future trends. The text tackles the basic elements, concepts and functions of digital computers, computer arithmetic, input media and devices, and computer output. The basic central processor functions, data storage and the organization of data by classification of computer files, identifying records and coding are also considered. The book discusses as well the systems and management considerations, programming and software, and hardware systems. The text is useful for computer science, computer engineering and computer programming students.

  • Medieval Studies and the Computer

    Computers and The Humanities
    • 1 Edición
    • Anne Gilmour-Bryson
    • Inglés
    Medieval Studies and the Computer focuses on the use of computers in medieval studies and humanities research. Topics covered range from encoding and concording texts to the use of conceptual glossaries by medievalists, as well as the use of computers for compiling Middle English lexicography and the Wisconsin Dictionary of the Old Spanish Language. A computer analysis of metrical patterns in the epic Beowulf and of Notker Labeo's Old High German is also presented. Comprised of 26 chapters, this volume begins by discussing "contexts" in concordances and the set of conventions employed in text encoding. The reader is then introduced to the series of initiatives undertaken in Belgium to study Latin literature and linguistics; the use of conceptual glossaries by medieval scholars; and the use of the computer to make a word list of the Decretum Gratiani and to study Geoffrey Chaucer's vocabulary. Subsequent chapters discuss a computer program called KLIC (Key Letter In Context) for graphological analysis; a set of routines written in SAIL (Stanford Artificial Intelligence Language) for use by social historians in quantitative analysis or text processing; and the use of Mark IV, a general-purpose file management system, to analyze medieval charters. This book will be of interest to medievalists, social historians, students and scholars of humanities, and computer scientists.

  • Distributed Computer Control System

    Proceedings of the IFAC Workshop, Tampa, Florida, U.S.A., 2-4 October 1979
    • 1 Edición
    • T. J. Harrison
    • Inglés
    Distributed Computer Control Systems: Proceedings of the IFAC Workshop, Tampa, Florida, U.S.A., 2-4 October 1979 focuses on the design, processes, methodologies, and applications of distributed computing systems. The selection first discusses the use of distributed control systems for facility energy management, including space conditioning control, plant design, central plant control, and system design. The book then takes a look at programming distributed computer systems with higher level languages. Topics include design of an application programming language for distributed computing systems; realization of a suitable programming language for distributed computing systems; and optimal structure and capabilities of an automatic control system. The text focuses on the similarities and differences of distributed computer control systems; transaction processing as an efficient conceptual framework for comparing and understanding distributed systems; and multi-processor approach for the automation of quality control in an overall production control system. The selection also deals with transaction processing in distributed control systems; parallel processing for distributed computer control systems; and design and development of distributed control systems. The book is a vital source of data for readers interested in distributed computing.

  • Wages and Earnings

    Reviews of United Kingdom Statistical Sources
    • 1 Edición
    • Andrew Dean
    • W. F. Maunder
    • Inglés
    Wages and Earnings is a review of statistical sources, both official and non-official, on wages and earnings in Britain. The non-official sources of data relate mostly to salary statistics, while most of the official data are produced by the Department of Employment. Topics covered range from wage rates and salary scales to fringe benefits and labor costs. The concepts of incomes, earnings, wages, and salaries are also explained. This book is comprised of eight chapters and begins with an overview of earnings as well as the concepts of wages and salaries. The next chapter examines three official sources of wage rates: Time Rates of Wages and Hours of Work, Changes in Rates of Wages and Hours of Work, and the Gazette. The reader is then introduced to the official and unofficial statistics on salary scales, as well as salary surveys and official sources of earnings. Fringe benefits, with the associated concept of total remuneration, and employers' labor costs are also discussed, along with historical data on earnings and its components. The final chapter evaluates the various statistical sources of wages and earnings and ends with a few recommendations. This monograph will be a valuable resource for economists and economic policymakers as well as government officials.

  • Software for Computer Control

    Proceedings of the Second IFAC/IFIP Symposium on Software for Computer Control, Prague, Czechoslovakia, 11-15 June 1979
    • 1 Edición
    • M. Novak
    • Inglés
    Software for Computer Control is a collection of papers and lectures presented at the Second IFAC/IFIP Symposium on Software for Computer Control, held in Prague, Czechoslovakia in June 1979. The symposium is organized with the hope of making vital contributions to the development of the computer sciences. The text focuses on the design and programming of process control systems used in various industrial processes and experiments. Topics covered include communication control in computer networks; program generators for process control applications; methods for the design of control software; presentations on software for microprocessors; real-time languages; algorithms for computer control; and applications of computer control in sciences. Computer scientists, systems analysts, programmers, and students of computer science will benefit from this book.

  • Random Matrices

    Revised and Enlarged Second Edition
    • 2 Edición
    • Madan Lal Mehta
    • Inglés
    Since the publication of Random Matrices (Academic Press, 1967) so many new results have emerged both in theory and in applications, that this edition is almost completely revised to reflect the developments. For example, the theory of matrices with quaternion elements was developed to compute certain multiple integrals, and the inverse scattering theory was used to derive asymptotic results. The discovery of Selberg's 1944 paper on a multiple integral also gave rise to hundreds of recent publications. This book presents a coherent and detailed analytical treatment of random matrices, leading in particular to the calculation of n-point correlations, of spacing probabilities, and of a number of statistical quantities. The results are used in describing the statistical properties of nuclear excitations, the energies of chaotic systems, the ultrasonic frequencies of structural materials, the zeros of the Riemann zeta function, and in general the characteristic energies of any sufficiently complicated system. Of special interest to physicists and mathematicians, the book is self-contained and the reader need know mathematics only at the undergraduate level.

  • An Introduction to The Mathematics of Finance

    • 2 Edición
    • A. H. Pollard
    • Inglés
    An Introduction to the Mathematics of Finance provides a simple, nonmathematical introduction to the mathematics of finance. Topics discussed in this book include simple interest; compound interest—annual compounding; annuities—certain; use of compound interest; and sinking funds. The equations of value; compounding more frequently than annually; and contracts at ""flat"" rates of interest are also deliberated. This text likewise elaborates on the loans repayable by equal annual installments when interest is charged only on the amount of principal from time to time outstanding. Exercises are provided at the end of each chapter, including its corresponding solutions. This publication provides a working knowledge of the mathematics of finance that is helpful to accountants, economists, investment officers, and demographers.

  • Geographic Information Systems for Geoscientists

    Modelling with GIS
    • 1 Edición
    • Graeme F. Bonham-Carter
    • Inglés
    Geographic Information Systems for Geoscientists: Modelling with GIS provides an introduction to the ideas and practice of GIS to students and professionals from a variety of geoscience backgrounds. The emphasis in the book is to show how spatial data from various sources (principally paper maps, digital images and tabular data from point samples) can be captured in a GIS database, manipulated, and transformed to extract particular features in the data, and combined together to produce new derived maps, that are useful for decision-making and for understanding spatial interrelationship. The book begins by defining the meaning, purpose, and functions of GIS. It then illustrates a typical GIS application. Subsequent chapters discuss methods for organizing spatial data in a GIS; data input and data visualization; transformation of spatial data from one data structure to another; and the combination, analysis, and modeling of maps in both raster and vector formats. This book is intended as both a textbook for a course on GIS, and also for those professional geoscientists who wish to understand something about the subject. Readers with a mathematical bent will get more out of the later chapters, but relatively non-numerate individuals will understand the general purpose and approach, and will be able to apply methods of map modeling to clearly-defined problems.

  • The Data Processing Security Game

    Safeguarding Against the Real Dangers of Computer Abuse
    • 1 Edición
    • Robert S. Becker
    • Inglés
    The Data Processing Security Game: Safeguarding against the Real Dangers of Computer Abuse aims to propose the fundamental elements required to insure satisfactory data processing (DP) security levels in a business setting. This text first presents the basic philosophical points regarding DP security game and the organization of this book. This selection then gives an assessment or self-evaluation of the DP environment, which is followed by a discussion on the basic areas of physical security to be considered. A significant area in the DP security game, which is magnetic volume control, is then discussed. This book then explains system security, backup procedure, control aspects, and business considerations. This selection will be very invaluable to those wanting to explore data processing security and apply it to a business environment.

  • Functional Analysis

    • 2 Edición
    • L. V. Kantorovich + 1 más
    • Inglés
    Functional Analysis examines trends in functional analysis as a mathematical discipline and the ever-increasing role played by its techniques in applications. The theory of topological vector spaces is emphasized, along with the applications of functional analysis to applied analysis. Some topics of functional analysis connected with applications to mathematical economics and control theory are also discussed. Comprised of 18 chapters, this book begins with an introduction to the elements of the theory of topological spaces, the theory of metric spaces, and the theory of abstract measure spaces. Many results are stated without proofs. The discussion then turns to vector spaces, normed spaces, and linear operators and functionals. Subsequent chapters deal with the analytic representation of functionals; sequences of linear operators; the weak topology in a Banach space; and compact and adjoint operators. The last section focuses on functional equations, including the adjoint equation and functional equations of the second kind. This monograph is intended for students specializing in mathematical analysis and computational mathematics.

  • Digital Computers in Action

    The Commonwealth and International Library: Computing Science and Cybernetics Division
    • 1 Edición
    • A. D. Booth
    • F. H. George
    • Inglés
    Digital Computers in Action is an introduction to the basics of digital computers as well as their programming and various applications in fields such as mathematics, science, engineering, economics, medicine, and law. Other topics include engineering automation, process control, special purpose games-playing devices, machine translation and mechanized linguistics, and information retrieval. This book consists of 14 chapters and begins by discussing the history of computers, from the idea of performing complex arithmetical calculations to the emergence of a modern view of the structure of a general purpose computing machine. Some of the most important applications of computers are also considered. This text introduces the structure and capabilities of the modern electronic digital computer; what operations can be performed by a typical machine and how these operations make the process of automatic calculation a useful one; and the uses of digital computers in mathematics, science, engineering, economics, medicine, and law. This book also examines the applications of computers to the automation of production engineering, process control in refinery transportation and the factory, and machine translation and mechanized linguistics. The final chapter deals with the use of computers in information storage and retrieval. This reference material is intended for students who wish to know how computers can be of assistance in their own disciplines.

  • Operational Expert System Applications in Europe

    • 1 Edición
    • Gian Piero Zarri
    • Inglés
    Operational Expert System Applications in Europe describes the representative case studies of the operational expert systems (ESs) that are used in Europe. This compilation provides examples of operational ES that are realized in 10 different European countries, including countries not usually examined in the standard reviews of the field. This book discusses the decision support system using several artificial intelligence tools; expert systems for fault diagnosis on computerized numerical control (CNC) machines; and expert consultation system for personal portfolio management. The failure probability based troubleshooting expert system for the Airbus A-310; automatic diagnosis of rotating machinery faults; and expert system for naval resource allocation are also covered. This publication is suitable for researchers and specialists interested in the operational expert system applications in Europe.

  • Elementary Vectors

    Pergamon International Library
    • 3 Edición
    • E. Œ. Wolstenholme
    • Inglés
    Elementary Vectors, Third Edition serves as an introductory course in vector analysis and is intended to present the theoretical and application aspects of vectors. The book covers topics that rigorously explain and provide definitions, principles, equations, and methods in vector analysis. Applications of vector methods to simple kinematical and dynamical problems; central forces and orbits; and solutions to geometrical problems are discussed as well. This edition of the text also provides an appendix, intended for students, which the author hopes to bridge the gap between theory and application in the real world. The text will be a superb reference material for students of higher mathematics, physics, and engineering.

  • Annual Review in Automatic Programming

    Volume 9
    • 1 Edición
    • M. I. Halpern
    • Inglés
    Annual Review in Automatic Programming, Volume 9 deals with automatic programming, with emphasis on the programming language ALGOL 68. The book demonstrates the progression in the formal definition of programming languages from ALGOL 60 through to the revised version of ALGOL 68. Other topics range from real-time operating systems and process control languages to data flow analysis, microprocessors, design automation, real-time system specifications, and Fortran real-time programming. After an introduction to the formal definition of ALGOL 68, this volume turns to an operating system which provides for a flexible interface to support a wide spectrum of real-time language facilities. The chapters that follow focus on data flow through the elements of a real time application, the possibilities as well as the problems of future microprocessor applications in real-time systems, and the design goals and main principles of a monitor called SIMON. A language based upon an automaton model is also described, with particular reference to synchronizations between actions and events. In addition, the book presents a pilot study of the possibility to develop an integrated interactive system for computer aided design of control computer systems and considers the industrial real-time BASIC designed for process control. A chapter discussing the unique distributed DDC system developed by Tokyo Gas Company and Hitachi for city gas production plants concludes the book. This book will be of use to students and professionals interested in programming languages.

  • Computer Systems for Human Systems

    • 1 Edición
    • Ada Demb
    • Inglés
    Computer Systems for Human Systems focuses on the human dynamics associated with the implementation of centralized computer systems. Based on a study conducted in 1974 and 1975 in the United States, it describes a coherent framework for the management of information systems development. This framework is designed to provide those involved in the development and implementation of computer-based information systems (decision-support systems) with an outline of the analytic resources available to them as they set about their complex task. Comprised of 11 chapters, this book begins with a review of the research and conventional wisdom from the information systems literature and a list of 32 "myths" or "predictions." Major concepts from organization development theory and research are then outlined, with emphasis on the management of change and internal organizational dynamics. These concepts are then applied to the findings from earlier chapters to systematize the "predictions" and to provide a more general analytic framework for the management of information system development. Subsequent chapters present a case study of a 10-campus college system which decided to centralize all computer facilities in 1972. The study examines progress, the impacts of the system on management activity, and managerial response to the system. The final chapter summarizes the findings from the field study, relates them to the concepts and predictions outlined earlier, and generates a set of recommendations for management action. This monograph will be of interest to systems designers, information systems managers, and those involved with computer-based systems.

  • Coalition and Connection in Games

    Problems of Modern Game Theory Using Methods Belonging to Systems Theory and Information Theory
    • 1 Edición
    • Silviu Guiasu + 1 más
    • Inglés
    Coalition and Connection in Games: Problems of Modern Game Theory using Methods Belonging to Systems Theory and Information Theory focuses on coalition formation and on connections occurring in games, noting the use of mathematical models in the evaluation of processes involved in games. The book first takes a look at the process of strategy in playing games in which the conditional choices of players are noted. The sequence of decisions during the playing of games and observance of the rules are emphasized. The text also ponders on the mathematical tool of game theory in which the differences in the playing of games is seen as influenced by the number of players involved. The manuscript reviews how the von Neumann-Morgenstern theory is used in measuring the conditions on how games are played. The theory points out that games with more than two players call for the introduction of concepts and an instrument in comparison with two-person zero-sum games. The text also underscores the tendency of players to obtain a large share of the payoff, whether playing by themselves or participating in coalitions. The book is a fine reference for readers interested in the analysis of game theories.

  • The New Chess Computer Book

    Pergamon Chess Series
    • 1 Edición
    • T. D. Harding
    • Jill Price + 1 más
    • Inglés
    The New Chess Computer Book is a revised edition of The Chess Computer Book that contains more than 50 percent new material about chess-playing microcomputers. Since the first edition of the book was written there have been large numbers of machines launched, some of which the author has been able to test over a long period. Inevitably there are new chess-playing, microcomputers machines, and updated modules for older ones, coming out all the time, with launch dates for machines in different countries often being different, due to commercial considerations. However, an attempt has been made to discuss in detail every top-of-the-range machine available on the British market. The book begins with a brief survey of the origins of chess computing and the development of chess-playing machines. This is followed by separate chapters on topics such as the types of machines that play chess; modular chess computers; computer hardware and software; and developments in chess microcomputers in the latter half of 1984.

  • Programming in COBOL

    Library of Computer Education
    • 1 Edición
    • G. T. Lancaster
    • Anthony Chandor
    • Inglés
    Programming in COBOL is a simple yet concise how-to book that teaches the programming language in a short yet effective step-by-step manner, which can be easily understood by anyone with sufficient knowledge in information technology. Covering first the advantages of COBOL over other programming languages, the book discusses COBOL's divisions - identification, environment, procedure, and data, and then describes the testing of the COBOL source programs and program questions. The book is valuable for those who wish to learn basic COBOL language, but do not have the time to take manufacturers' or technical college courses. Intended readers include experienced computer programmers familiar with other programming languages but not with COBOL, as well as students taking a course in computer science. The book is also helpful as it includes self-assessment questions for readers to ensure they understood the principles covered.

  • Mathematical Games and Pastimes

    Popular Lectures in Mathematics
    • 1 Edición
    • A. P. Domoryad
    • I. N. Sneddon + 1 más
    • Inglés
    Mathematical Games and Pastimes focuses on numerical solutions to mathematical games and pastimes. The book first discusses the binary system of notation and the system of notation with the base three. Congruences, Pythagorean and Heronic triples, and arithmetical pastimes are explained. The text takes a look at the nature of numerical tricks. Guessing the results of operations with unknown numbers; determination of numbers thought of using three tables; and extraction of roots of multidigit numbers are explained. The selection also touches on rapid calculations, games with piles of objects, Meleda, solitaire, and Lucas’ game. Problems on determining ways to reach goals are also presented. Games that show the numerous ways to reach goals are discussed. The text also examines Euler squares, dominoes, and problems related to the chess board. Pastimes related to objects changing places are also highlighted. Topics include Lucas’ problem, Ruma, and Monge’s shuffle. The book is highly recommended for readers wanting to find solutions to mathematical games and pastimes.

  • Operational Gaming

    An International Approach
    • 1 Edición
    • Ingolf Ståhl
    • Inglés
    Operational Gaming: An International Approach is the result of research carried out at the International Institute for Applied Systems Analysis (IIASA) situated at Laxenburg (near Vienna), Austria, which relates game theory and system analysis to decision making. The book first shows the relationship of game theory, experimental gaming, and operational gaming through a state-of-the-art survey. This topic includes the history, context, type, and uses of gaming. Then, the text shifts to the discussion on operational gaming, including the definitions of institutional model and game situation concepts. An overview of gaming in different nations including USSR is provided. The book also studies the international transfer of games and the East-West international trade games. The future of this field of study, as well as its implications for humans, is also examined in the latter parts. This book will be of significance to those interested in game theories and those people involved in policy and decision making in their country or organization.

  • Software Reliability

    State of the Art Report 14:2
    • 1 Edición
    • A. Bendell + 1 más
    • Inglés
    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth models. The next chapter deals with methods for predicting and estimating software reliability, with emphasis on their strengths and weaknesses. The reader is methodically introduced to formal inspection in software development; the effects of product design, program structure, development methods, and the environments of product testing and use on product reliability; and types of software metrics in relation to reliability. The remaining chapters explore the ways in which software engineers have sought to achieve software reliability through testing; problems and standards in software reliability data collection; and applications of time series models to software reliability analysis. This monograph will be of interest to software engineers and designers.

  • Analogues for the Solution of Boundary-Value Problems

    International Tracts in Computer Science and Technology and Their Application
    • 1 Edición
    • B. A. Volynskii + 1 más
    • N. Metropolish + 2 más
    • Inglés
    Analogues for the Solution of Boundary-Value Problems considers the simulation of integral methods of solving boundary-value problems. This book is organized into 11 chapters. After the introduction provided in Chapter I, the formulation of some important engineering problems that reduce to the solution of partial differential equations is reviewed in Chapter II. Chapter III covers the mathematical methods for the solution of problems, such as the thermal problem of electrode graphitization and underground coal gasification. The theory of the physical processes of electrical simulation and principles involved in the construction of analogues is elaborated in Chapter IV, while the measurements in electrical analogues is deliberated in Chapter V. Chapters VI to VIII describe the construction of network analyzers and star-integrating networks. The methods of physical simulation for the solution of certain boundary-value problems are analyzed in Chapter IX. Chapters X and XI are devoted to future improvements and developments in analogues for the solution of boundary-value problems. This publication is intended for college students and specialists engaged in solving boundary-value problems.

  • Computational Problems in Abstract Algebra

    Proceedings of a Conference Held at Oxford Under the Auspices of the Science Research Council Atlas Computer Laboratory, 29th August to 2nd September 1967
    • 1 Edición
    • John Leech
    • Inglés
    Computational Problems in Abstract Algebra provides information pertinent to the application of computers to abstract algebra. This book discusses combinatorial problems dealing with things like generation of permutations, projective planes, orthogonal latin squares, graphs, difference sets, block designs, and Hadamard matrices. Comprised of 35 chapters, this book begins with an overview of the methods utilized in and results obtained by programs for the investigation of groups. This text then examines the method for establishing the order of a finite group defined by a set of relations satisfied by its generators. Other chapters describe the modification of the Todd–Coxeter coset enumeration process. This book discusses as well the difficulties that arise with multiplication and inverting programs, and of some ways to avoid or overcome them. The final chapter deals with the computational problems related to invariant factors in linear algebra. Mathematicians as well as students of algebra will find this book useful.

  • Introductory Statistics

    • 1 Edición
    • M.H. Quenouille
    • Inglés
    Introductory Statistics is an elementary non-mathematical manual on statistics and provides a connected account of the more common statistical tests. It is divided into two parts: the first part introduces the reader to elementary applications of statistical methods and the line of reasoning involved in their use, and the second part covers elementary parts of statistical theory and more advanced applications. This book consists of nine chapters and opens with a discussion on the presentation of sets of measurements, touching on topics such as sampling, grouping, measures of spread, and standard deviation. The following chapters deal with normal distribution and its applications; comparison of two or several sets of measurements; attributes and comparison of proportions; and interrelations of sets of measurements. Concomitant observations are also considered, along with transformations and non-normal distributions. The final chapter is devoted to sampling methods, including the ratio method and the regression method. This monograph is written primarily for students of statistics and aims to help research workers gain a fuller understanding of the methods used in the analysis of their results.

  • Structural Analysis Systems

    Software — Hardware Capability — Compatibility — Applications
    • 1 Edición
    • A. Niku-Lari
    • Inglés
    Structural Analysis Systems: Software—Hardware Capability—Compatibi... Volume 1 is a practical guidebook on structural analysis systems and their applications. It provides detailed information about a specific software, its postprocessor capabilities and limitations, computer-aided design connection, and compatibility with the most common computers. Several practical examples from industry with computer and user cost are given. This volume consists of 22 chapters and begins with a brief description of the ADINA 84 system and its finite elements, material models, and solution capabilities. The discussion then turns to the analysis interpretive treatise and its database concept; the ANSYS program for engineering analysis; and the structural analysis capabilities of the boundary element analysis system BEASY. The following chapters explore other structural analysis programs such as DEFOR, FLASH, KYOKAI, PAFEC, and PANDA. General purpose finite element and boundary element computer programs for structural and solid mechanics applications are also described. This book will be a valuable resource for practitioners in scientific and industrial disciplines such as mechanical or civil engineering, informatics, applied mathematics, and computer science.

  • Mathematics with Understanding

    The Commonwealth and International Library: Mathematical Topics, Volume 2
    • 1 Edición
    • Harold Fletcher + 1 más
    • C. Plumpton
    • Inglés
    Mathematics with Understanding: Book 2 is an eight-chapter book that begins with an explanation of the number systems. Fractions, rational numbers, systems of integers, algebraic relations, shape, and measurement are then described. The modular arithmetic and groups as well as probability are also explained. This book will be useful to students and teachers for a deeper understanding of the structure behind many mathematical ideas and processes.

  • Analytic Properties of Feynman Diagrams in Quantum Field Theory

    International Series of Monographs in Natural Philosophy
    • 1 Edición
    • I. T. Todorov
    • D. Ter Haar
    • Inglés
    Analytic Properties of Feynman Diagrams in Quantum Field Theory deals with quantum field theory, particularly in the study of the analytic properties of Feynman graphs. This book is an elementary presentation of a self-contained exposition of the majorization method used in the study of these graphs. The author has taken the intermediate position between Eden et al. who assumes the physics of the analytic properties of the S-matrix, containing physical ideas and test results without using the proper mathematical methods, and Hwa and Teplitz, whose works are more mathematically inclined with applications of algebraic topology and homology theory. The book starts with the definition of the quadratic form of a Feynman diagram, and then explains the majorization of Feynman diagrams. The book describes the derivation of spectral representations, the dispersion relations for the nucleon-nucleon scattering amplitude, and for the corresponding partial wave amplitude. The text then analyzes the surface of singularities of a Feynman diagram with notes explaining the Cutkosky rules of the Mandelstam representation for the box diagram. This text is ideal for mathematicians, physicists dealing with quantum theory and mechanics, students, and professors in advanced mathematics.

  • Optimal Decisions

    Principles of Programming
    • 1 Edición
    • Oskar Lange
    • Inglés
    Optimal Decisions: Principles of Programming deals with all important problems related to programming. This book provides a general interpretation of the theory of programming based on the application of the Lagrange multipliers, followed by a presentation of the marginal and linear programming as special cases of this general theory. The praxeological interpretation of the method of Lagrange multipliers is also discussed. This text covers the Koopmans' model of transportation, geometric interpretation of the programming problem, and nature of activity analysis. The solution of the problem by marginal analysis, Hurwitz and the Bayes-Laplace principles, and planning of production under uncertainty are likewise deliberated. This publication is a good source for researchers and specialists intending to acquire knowledge of the principles of programming.

  • Safety of Computer Control Systems 1983 (Safecomp ' 83)

    Achieving Safe Real Time Computer Systems
    • 1 Edición
    • J. A. Baylis
    • Inglés
    Safety of Computer Control Systems 1983: Achieving Safe Real Time Computer Systems contains the proceedings of the Third IFAC/IFIP Workshop held at Cambridge, UK on September 20-22, 1983. Composed of 36 chapters, separated into the eight sessions of the workshop, this book begins with a discussion of the safety and reliability of computer control systems. Subsequent chapters explore the systems design for safety and reliability; fault tolerance, recovery, and use of redundancy; and aspects of fault tolerance for system reliability. Other chapters detail specification techniques; system development and quality assurance; verifications and validations; case studies; as well as scheduling, networks, and communications.

  • Modern Syllabus Algebra

    The Commonwealth and International Library: Mathematical Topics
    • 1 Edición
    • D.G.H.B. Lloyd
    • C. Plumpton
    • Inglés
    Modern Syllabus Algebra presents topics of traditional and modern algebra found in the Teachers Certificate and B.Ed, part I syllabuses of University Institutes of Education. It also contains additional exercises taken from examination papers of the University of London Institute of Education (the Teachers' Certificate). The book discusses several mathematical concepts such as sets, relations and functions, Boolean algebra, groups, and number systems. It also illustrates linear equations, matrices, and vector spaces and then demonstrates how to solve complex numbers and combine probabilities. Mathematics teachers will find this text a suitable and convenient way of bringing themselves up to date in what is now being taught in schools.

  • Annual Review in Automatic Programming

    International Tracts in Computer Science and Technology and Their Application, Volume 7
    • 1 Edición
    • Mark I. Halpern + 2 más
    • Inglés
    Computer Science and Technology and their Application is an eight-chapter book that first presents a tutorial on database organization. Subsequent chapters describe the general concepts of Simula 67 programming language; incremental compilation and conversational interpretation; dynamic syntax; the ALGOL 68. Other chapters discuss the general purpose conversational system for graphical programming and automatic theorem proving based on resolution. A survey of extensible programming language is also shown.

Temas relacionados