Saltar al contenido principal
Elsevier

Libros en Ciencias Físicas e Ingeniería

  • Future Sources of Organic Raw Materials: CHEMRAWN I

    CHEMRAWN Chemical Research Applied to Words Needs
    • 1 Edición
    • L.E. St-Pierre + 1 más
    • Inglés
    Future Sources of Organic Raw Materials: CHEMRAWN I is a collection of lectures presented at the World Conference on Future Sources of Organic Raw Materials, held in Toronto, Canada, on July 10-13, 1978. The conference focused on potential future sources of organic raw materials such as non-conventional fossil hydrocarbons, coal, industrial and agricultural wastes, and renewable resources like wood and other plant materials. This book is comprised of 52 chapters and opens with an assessment of the likely future availability of conventional oil and gas as they relate to possible demands for petrochemical feedstocks, paying particular attention to the availability and demand patterns for fossil hydrocarbons. The following chapters discuss the reserves and worldwide distribution of oil shale and tar sands; climate and its impact on renewable resources; research and management of natural resources; and production of chemicals directly from synthesis gas. Pyrolysis of solid carbonaceous materials is also considered, along with natural rubber production and biomass for non-food use. This monograph will be a useful resource for organic chemists and energy policymakers.

  • Bioreactor Modeling

    Interactions between Hydrodynamics and Biology
    • 1 Edición
    • Jerome Morchain
    • Inglés
    Dynamic simulation of bioreactors is a challenge for both the industrial and academic worlds. Beyond the large number of physical and biological phenomena to be considered and the wide range of scales involved, the central difficulty lies in the need to account for the dynamic behavior of suspended microorganisms. In the case of chemical reactors, knowledge of the thermodynamic equilibrium laws at the interfaces makes it possible to produce macroscopic models by integrating local laws. Microorganisms, on the other hand, have the ability to modulate the rate of substrate assimilation. Moreover, the nature of the biochemical transformations results from a compromise between the needs of the cell and the available resources. This book revisits the modeling of bioreactors using a multi-scale approach. It addresses issues related to mixing, phase-to-phase transfers and the adaptation of microorganisms to variations in concentration, and explores the use of population balances for the simulation of bioreactors.By adopting a multidisciplinary perspective that draws on process engineering, fluid mechanics and microbiology, this book sheds new light on the particularity of bioprocesses in relation to physical and chemical phenomena.

  • Mixed-Phase Clouds

    Observations and Modeling
    • 1 Edición
    • Constantin Andronache
    • Inglés
    Mixed-Phase Clouds: Observations and Modeling presents advanced research topics on mixed-phase clouds. As the societal impacts of extreme weather and its forecasting grow, there is a continuous need to refine atmospheric observations, techniques and numerical models. Understanding the role of clouds in the atmosphere is increasingly vital for current applications, such as prediction and prevention of aircraft icing, weather modification, and the assessment of the effects of cloud phase partition in climate models. This book provides the essential information needed to address these problems with a focus on current observations, simulations and applications.

  • Ethics Management in Libraries and Other Information Services

    • 1 Edición
    • Margarita Pérez Pulido
    • Inglés
    Ethics Management in Libraries and Other Information Services presents professional ethics from a managerial point-of-view, explaining how to implement ethical management systems in libraries and information services and presenting the necessary tools needed to understand the practical application of a system of ethical management based on ISO 26000: 2010. The examples and selected case studies will be helpful to professionals, teachers and students who want to both explore and apply ethics now and in the future.

  • The Handbook of Histopathological Practices in Aquatic Environments

    Guide to Histology for Environmental Toxicology
    • 1 Edición
    • Pedro M. Costa
    • Inglés
    The Handbook of Histopathological Practices in Aquatic Environments: Guide to Histology for Environmental Toxicology offers readers in aquatic biology and other water-based environmental sciences a comprehensive resource on histopathology, which is a key tool in the growing field of ecotoxicology. This work brings together the necessary knowledge, from sample preparation, to trait identification, and scoring and data treatment. Furthermore, with examples from several groups of organisms (from worms to fish), these practices can be applied across a wide array of aquatic ecosystems. This book provides a step-by-step approach to solving the questions researchers encounter in aquatic biology and related fields.

  • Biopolymer Grafting: Synthesis and Properties

    • 1 Edición
    • Vijay Kumar Thakur
    • Inglés
    Biopolymer Grafting: Synthesis and Properties presents the latest research and developments in fundamental of synthesis and properties of biopolymer-based graft copolymers. The book presents a broad overview of the biopolymer grafting process, along with trends in the field. It also introduces a range of grafting methods which lead to materials with enhanced properties for a range of practical applications, along with the positives and limitations of these techniques. The book bridges the knowledge gap between the scientific principles and industrial applications of polymer grafting. This book covers synthesis and characterization of graft-copolymers of plant polysaccharides, functional separation membranes from grafted biopolymers, and polysaccharides in alternative methods for insulin delivery. Recent trends and advances in this area are discussed, assisting materials scientists and researchers in mapping out the future of these new "green" materials through value addition to enhance their use.

  • Coulson and Richardson’s Chemical Engineering

    Volume 3A: Chemical and Biochemical Reactors and Reaction Engineering
    • 4 Edición
    • R. Ravi + 2 más
    • Inglés
    Coulson and Richardson’s Chemical Engineering: Volume 3A: Chemical and Biochemical Reactors and Reaction Engineering, Fourth Edition, covers reactor design, flow modelling, gas-liquid and gas-solid reactions and reactors.

  • Carbon Nanotube-Reinforced Polymers

    From Nanoscale to Macroscale
    • 1 Edición
    • Roham Rafiee
    • Inglés
    Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing.

  • Urban Emergency Management

    Planning and Response for the 21st Century
    • 1 Edición
    • Thomas Henkey
    • Inglés
    Urban Emergency Management: Planning and Response for the 21st Century takes the concepts and practices of emergency management and places them in the context of the complex challenges faced by the contemporary city. Cities provide unique challenges to emergency managers. The concentrated population and often dense layering of infrastructure can be particularly susceptible to disasters—both natural and human-caused. The book provides guidance across all phases of emergency management, including prevention and all-hazards approaches.

  • Peptides and Proteins as Biomaterials for Tissue Regeneration and Repair

    • 1 Edición
    • Mario Barbosa + 1 más
    • Inglés
    Peptides and Proteins as Biomaterials for Tissue Regeneration and Repair highlights the various important considerations that go into biomaterial development, both in terms of fundamentals and applications. After covering a general introduction to protein and cell interactions with biomaterials, the book discusses proteins in biomaterials that mimic the extracellular matrix (ECM). The properties, fabrication and application of peptide biomaterials and protein-based biomaterials are discussed in addition to in vivo and in vitro studies. This book is a valuable resource for researchers, scientists and advanced students interested in biomaterials science, chemistry, molecular biology and nanotechnology.

  • Electrical Submersible Pumps Manual

    Design, Operations, and Maintenance
    • 2 Edición
    • Gabor Takacs
    • Inglés
    Electrical Submersible Pumps Manual: Design, Operations and Maintenance, Second Edition continues to deliver the information needed with updated developments, technology and operational case studies. New content on gas handlers, permanent magnet motors, and newly designed stage geometries are all included. Flowing from basic to intermediate to special applications, particularly for harsh environments, this reference also includes workshop materials and class-style examples for trainers to utilize for the newly hired production engineer. Other updates include novel pump stage designs, high-performance motors and temperature problems and solutions specific for high temperature wells. Effective and reliable when used properly, electrical submersible pumps (ESPs) can be expensive to purchase and maintain. Selecting the correct pump and operating it properly are essential for consistent flow from production wells. Despite this, there is not a dedicated go-to reference to train personnel and engineers. This book keeps engineers and managers involved in ESPs knowledgeable and up-to-date on this advantageous equipment utilized for the oil and gas industry.

  • Imaging Genetics

    • 1 Edición
    • Adrian Dalca + 3 más
    • Inglés
    Imaging Genetics presents the latest research in imaging genetics methodology for discovering new associations between imaging and genetic variables, providing an overview of the state-of the-art in the field. Edited and written by leading researchers, this book is a beneficial reference for students and researchers, both new and experienced, in this growing area. The field of imaging genetics studies the relationships between DNA variation and measurements derived from anatomical or functional imaging data, often in the context of a disorder. While traditional genetic analyses rely on classical phenotypes like clinical symptoms, imaging genetics can offer richer insights into underlying, complex biological mechanisms.

  • Handbook of Antimicrobial Coatings

    • 1 Edición
    • Atul Tiwari
    • Inglés
    Handbook of Antimicrobial Coatings is the first comprehensive work on the developments being made in the emerging field of antimicrobial coatings. Crucial aspects associated with coating research are presented in the form of individual chapters. Particular close attention has been given to essential aspects necessary to understand the properties of novel materials. The book introduces the reader to progress being made in the field, followed by an outline of applications in different areas. Various methods and techniques of synthesis and characterization are detailed as individual chapters. Chapters provide insight into the ongoing research, current trends and technical challenges in this rapidly progressing field. The covered topics were chosen so that they can be easily understood by new scholars as well as advanced learners. No book has been written on this topic thus far with so much crucial information for materials scientists, engineers and technologists.

  • Cost Management in Plastics Processing

    Strategies, Targets, Techniques, and Tools
    • 4 Edición
    • Robin Kent
    • Inglés
    Cost Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Fourth Edition, makes readers think about current practices and how to go forward with effective cost management. This is a practical workbook that provides a structured approach to reducing costs in plastics processing for all the major plastics shaping processes (moulding, extrusion, forming) as well as elsewhere in the company (e.g., in factory services and non-manufacturing areas). Competition in all manufacturing sectors is increasing, and there is continuous pressure to drive costs down and to increase cost management. Good cost management improves profits and margins, improves management control and opens the door to becoming a world-class company. The approach throughout this book looks rigorously at where costs are incurred and proposes projects and targets for cost reduction. This book is designed to provide a well-structured map broken down into simple tasks and achievable goals. This book offers a structured approach to the techniques of cost management, from how costs are calculated by accountants, to the effective use of machines and labor, to the minimization of waste. It begins by looking at traditional methods of accounting and costing and whether these are helpful or accurate for project management. Practical examples of cost management in plastics processing are included, together with many useful flow charts and diagrams to illustrate the points under discussion.

  • 27th European Symposium on Computer Aided Process Engineering

    • 1 Edición
    • Volumen 40
    • Inglés
    27th European Symposium on Computer Aided Process Engineering, Volume 40 contains the papers presented at the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Barcelona, October 1-5, 2017. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries.

  • Microwave Antennas

    • 1 Edición
    • A. Z. Fradin
    • Inglés
    Microwave Antennas provides a comprehensive discussion on the various areas of concerns in microwave antenna theory and design. The title also presents data from technical journals that cover the advances in the developments of microwave antenna technology. The text first discusses the classification, structure, and operating principles of microwave antennas, and then proceeds to tackling the fundamental problem of microwave antenna theory and methods for its solution. In Chapter III, the selection covers the solution of a number of mathematical problems of diffraction at openings in plane screens. The remaining chapters deal with the various types of antennas, such as horn, lens, slots, and helical. The book will be of great interest to students and practitioners of radio and telecommunications engineering.

  • Perspectives in Hydrogen in Metals

    Collected Papers on the Effect of Hydrogen on the Properties of Metals and Alloys
    • 1 Edición
    • M. F. Ashby + 1 más
    • Inglés
    Perspectives in Hydrogen in Metals: Collected Papers on the Effect of Hydrogen on the Properties of Metals and Alloys discusses the advancement in the understanding of the effects of hydrogen on the physical and mechanical properties of metals and alloys. The title first covers solubility and other thermodynamic properties, and then proceeds to tackling diffusivity. Next, the selection discusses the trapping of hydrogen by defects and hydride formation. The text also talks about hydrogen in amorphous metals, along with the effect of hydrogen on plastic deformation. The last chapter covers hydrogen embrittlement. The book will be of great use chemists, metallurgists, and materials engineers.

  • Organosilicon Compounds

    Experiment (Physico-Chemical Studies) and Applications
    • 1 Edición
    • Vladimir Ya Lee
    • Inglés
    Organosilicon Compounds: Experiment (Physico-Chemical Studies) and Applications, volume 2, also contains two parts. In its first part, Experiment (Physico-Chemical Studies), the application of modern instrumental tools (such as X-ray crystallography, 29Si NMR spectroscopy, UV-Photoelectron Spectroscopy, and other methods) for assessing the structures of organosilicon compounds is described. The second part, Applications, reviews the current research in the field of material science, specifically the use of organosilicon compounds in synthetic chemistry directed towards the creation of new materials. Organosilicon Compounds: From Theory to Synthesis to Applications provides a comprehensive overview of this important area of organic and organometallic chemistry, dealing with compounds containing carbon–silicon bonds. This field, which includes compounds that are widely encountered in commercial products such as in the fabrication of sealants, adhesives, and coatings, has seen many milestone discoveries reported during the last two decades. Beginning with the theoretical aspects of organosilicon compounds’ structure and bonding, the book then explores their synthetic aspects, including main group element organosilicon compounds, transition metal complexes, silicon cages and clusters, low-coordinate organosilicon derivatives (cations, radicals, anions, multiple bonds to silicon, silaaromatics), and more. Next, readers will find valuable sections that explore physical and chemical properties of organosilicon compounds by means of X-ray crystallography, 29Si NMR spectroscopy, photoelectron spectroscopy, and other methods. Finally, the work delves into applications for industrial uses and in many related fields, such as polymers, material science, nanotechnology, bioorganics, and medicinal silicon chemistry.

  • Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants

    • 2 Edición
    • Joaquim Casal
    • Inglés
    Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants, Second Edition, covers the essential aspects of a diverse range of major accidents including fires, explosions and toxic clouds, and provides the key models necessary to calculate their effects and consequences with applications to real incidents. New topics in this up-to-date edition include dust explosions, evaluation of frequencies and probabilities, domino effect, transportation of hazardous materials, and analysis of significant accidents.The new edition of Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants is a valuable resource to engineers from the chemical/petrochemic... industry and those working with the transportation of hazardous materials (by road, rail, or pipelines), in addition to engineering companies and academics alike.

  • Environmental Carbon Footprints

    Industrial Case Studies
    • 1 Edición
    • Subramanian Senthilkannan Muthu
    • Inglés
    Environmental Carbon Footprints: Industrial Case Studies provides a wide range of industrial case-studies, beginning with textiles, energy systems and bio-fuels. Each footprint is associated with background information, scientific consensus and the reason behind its invention, methodological framework, assessment checklist, calculation tool/technique, applications, challenges and limitations. More importantly, applications of each indicator/framework in various industrial sectors and their associated challenges are presented. As case studies are the most flexible of all research designs, this book allows researchers to retain the holistic characteristics of real-life events while investigating empirical events.

  • Construction Delays

    • 3 Edición
    • Mark F Nagata + 3 más
    • Inglés
    Construction Delays, Third Edition, provides the latest specialized tools and techniques needed to avoid delays on construction projects. These include institutional, industrial, commercial, hi-rise, power and water, transportation and marine construction projects. Most other references provide only post facto construction delay analysis. This update includes 18 chapters, 105 sections and approximately 100 new pages relative to the second edition.

  • Security and Resilience in Intelligent Data-Centric Systems and Communication Networks

    • 1 Edición
    • Massimo Ficco + 1 más
    • Inglés
    Security and Resilience in Intelligent Data-Centric Systems and Communication Networks presents current, state-of-the-art work on novel research in theoretical and practical resilience and security aspects of intelligent data-centric critical systems and networks. The book analyzes concepts and technologies that are successfully used in the implementation of intelligent data-centric critical systems and communication networks, also touching on future developments. In addition, readers will find in-demand information for domain experts and developers who want to understand and realize the aspects (opportunities and challenges) of using emerging technologies for designing and developing more secure and resilient intelligent data-centric critical systems and communication networks. Topics covered include airports, seaports, rail transport systems, plants for the provision of water and energy, and business transactional systems. The book is well suited for researchers and PhD interested in the use of security and resilient computing technologies.

  • Marketing Services and Resources in Information Organizations

    • 1 Edición
    • Zhixian George Yi
    • Inglés
    With the rapid development of information and communication technology and increasingly intense competition with other organizations, information organizations face a pressing need to market their unique services and resources and reach their user bases in the digital age. Marketing Services and Resources in Information Organizations explores a variety of important and useful topics in information organisations based on the author’s marketing courses and his empirical studies on Australian academic librarians’ perceptions of marketing services and resources. This book provides an introduction to marketing, the marketing process, and marketing concepts, research, mix and branding, and much more. Readers will learn strategic marketing planning, implementation, and evaluation, effective techniques for promoting services and resources, and effective social media and Web 2.0 tools used to promote services and resources. Marketing Services and Resources in Information Organizations is survey-based, theoretical and practical. The advanced statistical techniques used in this book distinguish the findings from other survey research products in the marketing field, and will be useful to practitioners when they consider their own marketing strategies. This book provides administrators, practitioners, instructors, and students at all levels with effective marketing techniques, approaches, and strategies as it looks at marketing from multiple perspectives. Dr. Zhixian (George) Yi is a Leadership Specialization Coordinator and Ph.D. supervisor in the School of Information Studies at Charles Sturt University, Australia. He received a doctorate in information and library sciences and a PhD minor in educational leadership from Texas Woman’s University, and he was awarded his master’s degree in information science from Southern Connecticut State University. In 2009, he was awarded the Eugene Garfield Doctoral Dissertation Fellowship from Beta Phi Mu, the International Library and Information Studies Honor Society. He was selected for inclusion into Who’s Who in America in 2010.

  • Social Networks in China

    • 1 Edición
    • Xianhui Che + 1 más
    • Inglés
    Social Networks in China provides an in-depth guide to Chinese social networks, covering behaviors, usage, key issues, and future developments. Chinese scholarship and cultural idiosyncrasies in technology remain a relatively under-researched area. While such issues may be sporadically reported in popular media, it is often difficult to obtain a true understanding of authentic Chinese behaviors and practices. One such study area delves into whether Chinese users utilize technology to socialize in the same ways as people from western societies. As no book currently exists to address issues concerning Chinese social networks, this book takes on that shortage and opportunity.

  • Advances in Laser Materials Processing

    Technology, Research and Applications
    • 2 Edición
    • Jonathan R. Lawrence
    • Inglés
    Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 203
    • Inglés
    Advances in Imaging and Electron Physics, Volume 203, merges two long-running serials, Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. It features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science, digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Modelling and Simulation in the Science of Micro- and Meso-Porous Materials

    • 1 Edición
    • Richard Catlow + 2 más
    • Inglés
    Modelling and Simulation in the Science of Micro- and Meso-Porous Materials addresses significant developments in the field of micro- and meso-porous science. The book includes sections on Structure Modeling and Prediction, Synthesis, Nucleation and Growth, Sorption and Separation processes, Reactivity and Catalysis, and Fundamental Developments in Methodology to give a complete overview of the techniques currently utilized in this rapidly advancing field. It thoroughly addresses the major challenges in the field of microporous materials, including the crystallization mechanism of porous materials and rational synthesis of porous materials with controllable porous structures and compositions. New applications in emerging areas are also covered, including biomass conversion, C1 chemistry, and CO2 capture.

  • Water Extraction of Bioactive Compounds

    From Plants to Drug Development
    • 1 Edición
    • Herminia Dominguez + 1 más
    • Inglés
    Water Extraction of Bioactive Compounds: From Plants to Drug Development draws together the expert knowledge of researchers from around the world to outline the essential knowledge and techniques required to successfully extract bioactive compounds for further study. The book is a practical tool for medicinal chemists, biochemists, pharmaceutical scientists and academics working in the discovery and development of drugs from natural sources. The discovery and extraction of bioactive plant compounds from natural sources is of growing interest to drug developers, adding greater fuel to a simultaneous search for efficient, green technologies to support this. Particularly promising are aqueous based methods, as water is a cheap, safe and abundant solvent. Water Extraction of Bioactive Compounds: From Plants to Drug Development is a detailed guide to the fundamental concepts and considerations needed to successfully undertake such processes, supported by application examples and highlighting the most influential variables. Beginning with an introduction to plants as sources of drugs, the book highlights the need for a move towards both more rational and greener techniques in the field, and presents multiple innovative water-based strategies for the discovery and extraction of bioactive constituents of botanicals. A broad range of available techniques are reviewed, including conventional and pressurized hot water extraction techniques, intensified processes such as microwave-assisted, ultrasound-assisted processes, and enzyme assisted extraction, and processes using combined techniques.

  • The Future of Semiconductor Oxides in Next-Generation Solar Cells

    • 1 Edición
    • Monica Lira-Cantu
    • Inglés
    The Future of Semiconductor Oxides in Next-Generation Solar Cells begins with several chapters covering the synthesis of semiconductor oxides for NGSCs. Part II goes on to cover the types and applications of NGSCs currently under development, while Part III brings the two together, covering specific processing techniques for NGSC construction. Finally, Part IV discusses the stability of SO solar cells compared to organic solar cells, and the possibilities offered by hybrid technologies. This comprehensive book is an essential reference for all those academics and professionals who require thorough knowledge of recent and future developments in the role of semiconductor oxides in next generation solar cells.

  • Advances in Clinical Chemistry

    • 1 Edición
    • Volumen 82
    • Inglés
    Advances in Clinical Chemistry, Volume 82, the latest installment in this internationally acclaimed series, contains chapters authored by world-renowned clinical laboratory scientists, physicians and research scientists. This updated volume includes chapters on Calcium and Bone Metabolism Indices, Cytokines and MicroRNA in Coronary Artery Disease, Biological and molecular characterization of circulating tumor cells: A creative strategy for precision medicine?, Towards a blood-borne biomarker of chronic hypoxemia: Red cell distribution width and respiratory disease, miRNAs: nanomachines that microManage the pathophysiology of Diabetes mellitus, and Fortilin, A Potential Target for the Prevention and Treatment of Human Diseases. The serial discusses the latest and most up-to-date technologies related to the field of clinical chemistry, and is the benchmark for novel analytical approaches in the clinical laboratory.

  • NMR Case Studies

    Data Analysis of Complicated Molecules
    • 1 Edición
    • Jeffrey H. Simpson
    • Inglés
    NMR Case Studies: Data Analysis of Complicated Molecules provides a detailed discussion of the full logical flow associated with assigning the NMR spectra of complex molecules, also helping readers further develop their NMR spectral assignment skills. The robust case studies present the logic of each assignment, from beginning to end, fully exploring the available range of potential solutions. Readers will gain a better appreciation of various approaches and develop an intuitive sense for when this particular concept should be implemented, thus enhancing their skillsets and providing a host of methodologies potentially amenable to yielding correct assignments. Authored by a scientist with more than 20 years of experience in research and instruction, this book is the ideal reference for anyone in search of application-based content. The book addresses complicated molecules, including corticosteroids, biomolecules, polypeptides, and secondary metabolites.

  • Biopolymer Grafting: Applications

    • 1 Edición
    • Vijay Kumar Thakur
    • Inglés
    Biopolymer Grafting: Applications　present... the latest research and developments in the practical application of these methods in industry, both to enable polymer scientists and engineers to keep up with the latest research trends, as well as to propose ideas for further research and application. Research into bio-based polymers has become increasingly prevalent. However, due to challenges related to the properties of these materials compared to synthetic polymers—such as their resistance to chemicals or weather—uptake has not dramatically increased yet. As a result, improvements in surface modification of bio-polymers through graft copolymerization are enormously important, because they will widen the scope of their applications. Relevant industries for application of these methods include automotive, construction, food, packaging, agriculture, textiles and paper. This book provides an overview of the developments made in the area of biopolymer-based graft polymers. Advantages, disadvantages and suggestions for future works are discussed, assisting materials scientists and researchers in mapping out the future of these new "green" materials through value addition to enhance their use.

  • Fractional Operators with Constant and Variable Order with Application to Geo-hydrology

    • 1 Edición
    • Abdon Atangana
    • Inglés
    Fractional Operators with Constant and Variable Order with Application to Geo-hydrology provides a physical review of fractional operators, fractional variable order operators, and uncertain derivatives to groundwater flow and environmental remediation. It presents a formal set of mathematical equations for the description of groundwater flow and pollution problems using the concept of non-integer order derivative. Both advantages and disadvantages of models with fractional operators are discussed. Based on the author’s analyses, the book proposes new techniques for groundwater remediation, including guidelines on how chemical companies can be positioned in any city to avoid groundwater pollution.

  • Introduction to Linear Control Systems

    • 1 Edición
    • Yazdan Bavafa-Toosi
    • Inglés
    Introduction to Linear Control Systems is designed as a standard introduction to linear control systems for all those who one way or another deal with control systems. It can be used as a comprehensive up-to-date textbook for a one-semester 3-credit undergraduate course on linear control systems as the first course on this topic at university. This includes the faculties of electrical engineering, mechanical engineering, aerospace engineering, chemical and petroleum engineering, industrial engineering, civil engineering, bio-engineering, economics, mathematics, physics, management and social sciences, etc. The book covers foundations of linear control systems, their raison detre, different types, modelling, representations, computations, stability concepts, tools for time-domain and frequency-domain analysis and synthesis, and fundamental limitations, with an emphasis on frequency-domain methods. Every chapter includes a part on further readings where more advanced topics and pertinent references are introduced for further studies. The presentation is theoretically firm, contemporary, and self-contained. Appendices cover Laplace transform and differential equations, dynamics, MATLAB and SIMULINK, treatise on stability concepts and tools, treatise on Routh-Hurwitz method, random optimization techniques as well as convex and non-convex problems, and sample midterm and endterm exams. The book is divided to the sequel 3 parts plus appendices. PART I: In this part of the book, chapters 1-5, we present foundations of linear control systems. This includes: the introduction to control systems, their raison detre, their different types, modelling of control systems, different methods for their representation and fundamental computations, basic stability concepts and tools for both analysis and design, basic time domain analysis and design details, and the root locus as a stability analysis and synthesis tool. PART II: In this part of the book, Chapters 6-9, we present what is generally referred to as the frequency domain methods. This refers to the experiment of applying a sinusoidal input to the system and studying its output. There are basically three different methods for representation and studying of the data of the aforementioned frequency response experiment: these are the Nyquist plot, the Bode diagram, and the Krohn-Manger-Nichols chart. We study these methods in details. We learn that the output is also a sinusoid with the same frequency but generally with different phase and magnitude. By dividing the output by the input we obtain the so-called sinusoidal or frequency transfer function of the system which is the same as the transfer function when the Laplace variable s is substituted with . Finally we use the Bode diagram for the design process. PART III: In this part, Chapter 10, we introduce some miscellaneous advanced topics under the theme fundamental limitations which should be included in this undergraduate course at least in an introductory level. We make bridges between some seemingly disparate aspects of a control system and theoretically complement the previously studied subjects. Appendices: The book contains seven appendices. Appendix A is on the Laplace transform and differential equations. Appendix B is an introduction to dynamics. Appendix C is an introduction to MATLAB, including SIMULINK. Appendix D is a survey on stability concepts and tools. A glossary and road map of the available stability concepts and tests is provided which is missing even in the research literature. Appendix E is a survey on the Routh-Hurwitz method, also missing in the literature. Appendix F is an introduction to random optimization techniques and convex and non-convex problems. Finally, appendix G presents sample midterm and endterm exams, which are class-tested several times.

  • High-Performance Apparel

    Materials, Development, and Applications
    • 1 Edición
    • John McLoughlin + 1 más
    • Inglés
    High-Performance Apparel: Materials, Development, and Applications covers the materials and techniques used in creating high-performance apparel, the technical aspects of developing high-performance garments, and an array of applications for high-performance clothing and wearable technology. Part One covers fabric construction for high-performance garments, from fiber types and spinning methods, to weaving, knitting, finishing, and joining techniques. Development of high-performance apparel is covered in Part Two, with particular emphasis on design and product development for function and wearer comfort. Part Three covers a range of applications and wearable technology that make use of high-performance apparel, including chapters on sportswear, protective clothing, and medical, military, and intelligent textiles. The book provides an excellent resource for all those engaged in garment development and production, and for academics engaged in research into apparel technology and textile science.

  • Environmental Geochemistry

    Site Characterization, Data Analysis and Case Histories
    • 2 Edición
    • Benedetto DeVivo + 2 más
    • Inglés
    Environmental Geochemistry: Site Characterization, Data Analysis and Case Histories, Second Edition, reviews the role of geochemistry in the environment and details state-of-the-art applications of these principles in the field, specifically in pollution and remediation situations. Chapters cover both philosophy and procedures, as well as applications, in an array of issues in environmental geochemistry including health problems related to environment pollution, waste disposal and data base management. This updated edition also includes illustrations of specific case histories of site characterization and remediation of brownfield sites.

  • Recent Advances in the Analysis of Marine Toxins

    • 1 Edición
    • Volumen 78
    • Inglés
    Recent Advances in the Analysis of Marine Toxins, Volume 78, the newest release in the Comprehensive Analytical Chemistry series, presents chapters from the best authors in the field, making it an essential resource. Updated sections in this new volume include topics such as The importance of toxin detection and quantification: environmental issues, public health, food safety, animal health, bioterrorism, bioactive compounds, medical approach, an LC-MS/MS analysis of marine toxins, Animal bioassays: identification of toxins and mechanism of action, Receptor binding assays for the analysis of marine toxins, Immunoassays and optical biosensors (visual, SPR, fluorescence) for marine toxins, and Electrochemical biosensors for marine toxins. Chapters in this ongoing series contain practical and useful information, describing real advantages and limitations. Experts in this field contribute based on their research and personal point-of-view.

  • Biodegradable and Biocompatible Polymer Composites

    Processing, Properties and Applications
    • 1 Edición
    • Navinchandra Gopal Shimpi
    • Inglés
    Biodegradable and Biocompatible Polymer Composites: Processing, Properties and Applications begins by discussing the current state-of-the-art, new challenges and opportunities for various biodegradable and biocompatible polymer composite systems. Interfacial characterization of composites and the structure-property relationships in various composite systems are explained in detail via a theoretical model. Processing techniques for various macro and nanocomposite systems and the influence of processing parameters on properties of the composite are also reviewed in detail. The characterization of microstructure, elastic, visco-elastic, static and dynamic mechanical, thermal, rheological, optical, and electrical properties are highlighted, as are a broad range of applications. The book is a useful reference resource for both researchers and engineers working in composites materials science, biotechnology and nanotechnology, and is also useful for students attending chemistry, physics, and materials science and engineering courses.

  • An Introduction to Bibliometrics

    New Development and Trends
    • 1 Edición
    • Rafael Ball
    • Inglés
    An Introduction to Bibliometrics: New Development and Trends provides a comprehensible, readable and easy to read introduction to bibliometrics. Importantly, the book surveys the latest developments of bibliometrics (such as altmetrics, etc.) and how the field is likely to change over the next decade. In the literature, bibliometrics is generally discussed from one of two perspectives: (1) Purely mathematical/statist... or (2) Its sociological implications. Both approaches are very far from how most users want to apply bibliometrics. This book fills that need by providing tactics on how bibliometrics can be applied to their sphere of scientific activity.

  • Molecular and Laser Spectroscopy

    Advances and Applications
    • 1 Edición
    • V.P. Gupta
    • Inglés
    Molecular and Laser Spectroscopy: Advances and Applications provides students and researchers with an up-to-date understanding of the fast-developing area of molecular and laser spectroscopy. Editor V.P. Gupta has brought together the eminent scientists on a selection of topics to develop a systematic approach, first covering basic principles needed to understand each cutting-edge technique and application. This book acts as a standard reference for advanced students of molecular and laser spectroscopy and as a graduate text for new entrants in the field. The book covers a wide range of applications of molecular and laser spectroscopy in diverse areas ranging from materials to medicine and defence, biomedical research, environmental monitoring, forensic investigations, food and agriculture, and chemical, pharmaceutical and petrochemical processes. Researchers and scientific personnel in these fields will learn the latest techniques in order to put them to practical use in their work.

  • The Ecology of Sandy Shores

    • 3 Edición
    • Anton McLachlan + 1 más
    • Inglés
    The Ecology of Sandy Shores, Third Edition, provides both a holistic and conceptual introduction for beginners, while also presenting an in-depth and cutting-edge analysis for researchers interested in sandy shores. This new edition focuses on resource use, and has also been updated to include recent findings, enhanced illustrations, and additional coverage on beach fisheries and global/climate change. In addition, this release presents insights on food webs, greater coverage on global biodiversity patterns in sandy beaches, and new insights on population patterns, behavior and threats.Research on beaches is difficult because of the dynamic nature of the environment. There is no other book covering the ecology of sandy beaches, despite the extent and economic importance of these systems. This book is designed to both provide the conceptual basis to introduce students to the basic principles of sandy shore ecology and to serve as a ready reference for doctoral students and researches working on these systems. It can also serve as a handbook for land and coastal managers.

  • Polylactide Foams

    Fundamentals, Manufacturing, and Applications
    • 1 Edición
    • Mohammadreza Nofar + 1 más
    • Inglés
    Polylactide Foams: Fundamentals, Manufacturing, and Applications provides an introduction to the fundamental science behind plastic foams, polylactic acid) and polylactide foaming, giving designers tactics to replace traditional resins with sustainable and biodegradable materials. The book then delves deeper into the technology behind PLA foaming, such as PLA/gas mixture characteristics, solubility, interfacial tension behaviors and crystallization kinetics of various types of PLA and their compounds. The foaming behaviors and mechanisms of various types of PLA and PLA compounds are extensively analyzed and discussed through different manufacturing technologies, namely extrusion foaming, foam injection molding and bead foaming. Interest in Poly(lactic acid) and PLA foams is extremely high – particularly as a potential replacement for styrenic resins – and the price of PLA resin is lower than ever before. This biopolymer has significant potential to improve the sustainability of the plastics industry. Polylactide Foams have a range of potential applications, such as in construction, packaging, insulation, biomedical scaffolds, and others. However, processing and performance of PLA are not at the same level as other non-biodegradable resins.

  • Nuclear Engineering

    A Conceptual Introduction to Nuclear Power
    • 1 Edición
    • Malcolm Joyce
    • Inglés
    Nuclear Engineering: A Conceptual Introduction to Nuclear Power provides coverage of the introductory, salient principles of nuclear engineering in a comprehensive manner for those entering the profession at the end of their degree. The nuclear power industry is undergoing a renaissance because of the desire for low-carbon baseload electricity, the growing population, and environmental concerns about shale gas, so this book is a welcomed addition to the science. In addition, users will find a great deal of information on the change in the industry, along with other topical areas of interest that are uniquely covered. Intended for undergraduate students or early postgraduate students studying nuclear engineering, this new text will also be appealing to scientifically-liter... non-experts wishing to be better informed about the ‘nuclear option'.

  • Advanced Characterization and Testing of Textiles

    • 1 Edición
    • Patricia I. Dolez + 2 más
    • Inglés
    Advanced Characterization and Testing of Textiles explores developments in physical and chemical testing and specific high-performance tests relating to textiles. The book introduces the principles of advanced characterization and testing, including the importance of performance-based specifications in the textiles industry. Chapters are organized by textile properties, providing in-depth coverage of each characteristic. Tests for specific applications are addressed, with the main focus on high-performance and technical textiles.

  • Animals and Human Society

    • 1 Edición
    • Colin G. Scanes + 1 más
    • Inglés
    Animals and Human Society provides a solid, scientific, research-based background to advance understanding of how animals impact humans. Animals have had profound effects on people from the earliest times, ranging from zoonotic diseases, to the global impact of livestock, poultry and fish production, to the influences of human-associated animals on the environment (on extinctions, air and water pollution, greenhouse gases, etc.), to the importance of animals in human evolution and hunter -gatherer communities.As a resource for both science and non-science, Animals and Human Society can be used as a text for courses in Animals and Human Society or Animal Science, or as supplemental material for Introduction to Animal Science. It offers foundational background to those who may have little background in animal agriculture and have focused interest on companion animals and horses. The work introduces livestock production (including poultry and aquaculture) but also includes coverage of companion and lab animals. In addition, animal behavior and animal perception are covered.Animals and Human Society is likewise an excellent resource for researchers, academics, or students newly entering a related field or coming from another discipline and needing foundational information, as well as interested laypersons looking to augment their knowledge on the many impacts of animals in human society.

  • Cellular Internet of Things

    Technologies, Standards, and Performance
    • 1 Edición
    • Olof Liberg + 4 más
    • Inglés
    Cellular Internet of Things: Technologies, Standards and Performance gives insight into the recent work performed by the 3rd Generation Partnership Project (3GPP) to develop systems for the Cellular Internet of Things. It presents both the design of the new Narrowband Internet of Things (NB-IoT) technology and how GSM and LTE have evolved to provide Cellular Internet of Things services. The criteria used for the design and objectives of the standardization work are explained, and the technical details and performance of each technology is presented. This book discusses the overall competitive landscape for providing wireless connectivity, also introducing the most promising technologies in the market. Users will learn how cellular systems work and how they can be designed to cater to challenging new requirements that are emerging in the telecom industry, what the physical layers and procedures in idle and connected mode look like in EC-GSM-IoT, LTE-M, and NB-IoT, and what the expected performance of these new systems is in terms of expected coverage, battery lifetime, data throughput, access delay time and device cost. Learn: How cellular systems work, and how they can be designed to cater for challenging new requirements emerging in the telecom industry. How the physical layers and the procedures in idle and connected mode look like in EC-GSM-IoT, LTE-M, and NB-IoT. What the expected performance of these new systems is in terms of expected coverage, battery lifetime, data throughput, access delay time, and device cost. How the Low-Power-Wide-Area IoT market segment looks like and how different available solutions compare in terms of performance and compatibility with already existing radio networks. What system capacity and network level performance can be achieved when deploying these new systems, and in addition what deployment options are possible.

  • Translating Diverse Environmental Data into Reliable Information

    How to Coordinate Evidence from Different Sources
    • 1 Edición
    • Daniel A. Vallero
    • Inglés
    Translating Diverse Environmental Data into Reliable Information: How to Coordinate Evidence from Different Sources is a resource for building environmental knowledge, particularly in the era of Big Data. Environmental scientists, engineers, educators and students will find it essential to determine data needs, assess their quality, and efficiently manage their findings. Decision makers can explore new open access databases and tools, especially portals and dashboards. The book demonstrates how environmental knowledgebases are and can be built to meet the needs of modern students and professionals. Topics covered include concepts and principles that underpin air, water, and other public health and ecological topics. Integrated and systems perspectives are woven throughout, with clues on how to build and apply interdisciplinary data, which can increasingly be obtained from sources ranging from peer-reviewed research appearing in scientific journals to information gathered by citizen scientists. This opens the door to using vast amounts of open data and the necessary quality assurance and metadata considerations for their countless applications.

  • Nonlinear Systems in Heat Transfer

    Mathematical Modeling and Analytical Methods
    • 1 Edición
    • Davood Domairry Ganji + 2 más
    • Inglés
    Nonlinear Heat Transfer: Mathematical Modeling and Analytical Methods addresses recent progress and original research in nonlinear science and its application in the area of heat transfer, with a particular focus on the most important advances and challenging applications. The importance of understanding analytical methods for solving linear and nonlinear constitutive equations is essential in studying engineering problems. This book provides a comprehensive range of (partial) differential equations, applied in the field of heat transfer, tackling a comprehensive range of nonlinear mathematical problems in heat radiation, heat conduction, heat convection, heat diffusion and non-Newtonian fluid systems. Providing various innovative analytical techniques and their practical application in nonlinear engineering problems is the unique point of this book. Drawing a balance between theory and practice, the different chapters of the book focus not only on the broader linear and nonlinear problems, but also applied examples of practical solutions by the outlined methodologies.

  • Nanobiomaterials

    Nanostructured Materials for Biomedical Applications
    • 1 Edición
    • Roger Narayan
    • Inglés
    Nanobiomaterials: Nanostructured materials for biomedical applications covers an extensive range of topics related to the processing, characterization, modeling, and biomedical applications of nanostructured ceramics, polymers, metals, composites, self-assembled materials, and macromolecules. Novel approaches for bottom-up and top-down processing of nanostructured biomaterials are highlighted. In addition, innovative techniques for characterizing the in vitro behavior and in vivo behavior of nanostructured biomaterials are considered. Applications of nanostructured biomaterials in dentistry, drug delivery, medical diagnostics, surgery and tissue engineering are examined.

  • Advances in Ceramic Biomaterials

    Materials, Devices and Challenges
    • 1 Edición
    • Paola Palmero + 2 más
    • Inglés
    Bioceramics are an important class of biomaterials. Due to their desirable attributes such as biocompatibility and osseointegration, as well as their similarity in structure to bone and teeth, ceramic biomaterials have been successfully used in hard tissue applications. In this book, a team of materials research scientists, engineers, and clinicians bridge the gap between materials science and clinical commercialization providing integrated coverage of bioceramics, their applications and challenges. The book is divided into three parts. The first part is a review of classes of medical-grade ceramic materials, their synthesis and processing as well as methods of property assessment. The second part contains a review of ceramic medical products and devices developed, their evolution, their clinical applications and some of the lessons learned from decades of clinical use. The third part outlines the challenges to improve performance and the directions that novel approaches and advanced technologies are taking, to meet these challenges. With a focus on the dialogue between surgeons, engineers, material scientists, and biologists, this book is a valuable resource for researchers and engineers working toward long-lasting, reliable, customized biomedical ceramic and composites devices.

Temas relacionados