Saltar al contenido principal

Libros en Ciencias Físicas e Ingeniería

  • Exploring University Mathematics

    Lectures Given at Bedford College, London
    • 1 Edición
    • Mary Bradburn + 2 más
    • N. J. Hardiman
    • Inglés
    Exploring University Mathematics, Volume 3 provides information pertinent to pure and applied mathematics. This book discusses the close relationship between mathematics and physics. Organized into seven chapters, this volume begins with an overview of the concept of mapping in mathematics, which provides a correspondence between elements of one set with elements of another. This text then examines the theory of inflatable structures in the study of the hovercrafs in two dimensions. Other chapters consider the explicit investigation of logic by mathematicians whereby mathematics has been conceived as pre-eminently a deductive science. This book discusses as well how Taylor's formula is used in various aspects, including integration, approximating functions, finding roots of algebraic equations, and solving differential equations in forms suitable for computer calculations. This book is intended to be suitable for students on a degree course in mathematics. Mathematicians, teachers, and research workers will also find this book extremely useful.
  • Progress in Reaction Kinetics

    Volume 5
    • 1 Edición
    • G. Porter
    • Inglés
  • Interconnection Networks

    • 1 Edición
    • Volumen 5
    • J.-C. Bermond
    • Inglés
    Most of the articles in this book deal with static or point-to-pointInterc... Networks. In particular, new constructions are proposed basedon different tools from discrete mathematics. Many new records have beenestablished in the table of the maximum number of vertices of graphs withmaximum degree &Dgr; and diameter D. Properties of thesenetworks (and of more classical ones) are analyzed in many of the otherpapers. About 40% of the articles deal with fault tolerance orvulnerability properties using either combinatorial tools or probabilisticones.
  • Electronic Engineering Applications of Two–Port Networks

    Applied Electricity and Electronics Division
    • 1 Edición
    • H. B. Gatland
    • P. Hammond
    • Inglés
    Electronic Engineering Applications of Two-Port Networks aims to present the method of developing two-port theory to form the basis of a course on linear electronic systems. This book specifically presents topics on small-signal parameters; two-port models; small-signal analysis of the common-emitter amplifier; and general analysis of small-signal amplifier performance. A chapter is devoted to discussing topics on tandem connections of two ports, which is followed by exercises on matrix reduction. This text also tackles basic feedback connections, feedback amplifiers, and feedback oscillators. The application of the feedback systems is then examined. This book concludes by explaining the capacitive effects on transistor performance. This text will be beneficial to students and experts in the field of electronics.
  • Computing Methods in Crystallography

    • 1 Edición
    • J. S. Rollett
    • Inglés
    Computing Methods in Crystallography is a collection of lectures delivered at a Summer School, held in Oxford in August 1962. The book presents the underlying mathematics and computing methods in crystallography. The text covers topics on the algebra required for the fundamental operations of transformation of coordinates, interpolation, approximation of trigonometric and exponential functions, solution of linear equations and derivation of latent roots and vectors; methods for calculation of structure factors, least-squares adjustment, and Fourier series evaluation; the theory and practice of intensity scaling and symmetry determination; and methods of direct phase determination. Crystallographers, physicists, and students in allied fields will find the book very useful.
  • MSX Made Simple

    Made Simple Computerbooks
    • 1 Edición
    • Margaret Norman
    • Inglés
  • Designs and Graphs

    • 1 Edición
    • Volumen 4
    • C.J. Colbourn + 2 más
    • Inglés
    In 1988, the news of Egmont Köhler's untimely death at the age of 55reached his friends and colleagues. It was widely felt that a lastingmemorial tribute should be organized. The result is the present volume,containing forty-two articles, mostly in combinatorial design theory andgraph theory, and all in memory of Egmont Köhler. Designs and graphswere his areas of particular interest; he will long be remembered for hisresearch on cyclic designs, Skolem sequences, t-designs and theOberwolfach problem. Professors Lenz and Ringel give a detailedappreciation of Köhler's research in the first article of thisvolume.There is, however, one aspect of Egmont Köhler's biographythat merits special attention. Before taking up the study of mathematics atthe age of 31, he had completed training as a musician (studying bothcomposition and violoncello at the Musikhochschule in Berlin), and workedas a cellist in a symphony orchestra for some years. This accounts for hisinterest in the combinatorial aspects of music. His work and lectures inthis direction had begun to attract the interest of many musicians, and hehad commenced work on a book on mathematical aspects of musical theory. Itis tragic indeed that his early death prevented the completion of his work;the surviving paper on the classification and complexity of chordsindicates the loss that his death meant to the area, as he was almostuniquely qualified to bring mathematics and music together, being aprofessional in both fields.
  • Newnes Guide to Satellite TV

    Installation, Reception and Repair
    • 2 Edición
    • D. J. Stephenson
    • Inglés
  • Servicing Personal Computers

    • 2 Edición
    • Michael Tooley
    • Inglés
    Servicing Personal Computers, Second Edition focuses on the techniques and processes involved in the repair of personal computers. The book first discusses microcomputer systems. Microprocessors, Z80 support devices, random access memory, parallel input and output, and memory mapped input and output are then explained. The text looks at test equipment, printers and monitors, and tapes and disk drives. The publication also discusses fault diagnosis and considers initial check procedures, testing the CPU board, and miscellaneous faults. The book then underscores the servicing of IBM PC and compatibles. The 8086 and 8088 microprocessors, 8086 registers, 80286 microprocessor, support devices, and useful memory locations are described. The text also presents commonly used symbols, TTL families and device numbering, common TTL pin-outs, RAM data, and equivalent logic functions. The selection is a vital source of information for those interested in personal computer repair.
  • The Iron Blast Furnace

    Theory and Practice
    • 1 Edición
    • J. G. Peacey + 1 más
    • D. W. Hopkins
    • Inglés
    The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.
  • A Course of Mathematical Analysis

    International Series of Monographs on Pure and Applied Mathematics
    • 1 Edición
    • A. F. Bermant
    • I. N. Sneddon + 2 más
    • Inglés
    A Course of Mathematical Analysis, Part I is a textbook that shows the procedure for carrying out the various operations of mathematical analysis. Propositions are given with a precise statement of the conditions in which they hold, along with complete proofs. Topics covered include the concept of function and methods of specifying functions, as well as limits, derivatives, and differentials. Definite and indefinite integrals, curves, and numerical, functional, and power series are also discussed. This book is comprised of nine chapters and begins with an overview of mathematical analysis and its meaning, together with some historical notes and the geometrical interpretation of numbers. The reader is then introduced to functions and methods of specifying them; notation for and classification of functions; and elementary investigation of functions. Subsequent chapters focus on limits and rules for passage to the limit; the concepts of derivatives and differentials in differential calculus; definite and indefinite integrals and applications of integrals; and numerical, functional, and power series. This monograph will be a valuable resource for engineers, mathematicians, and students of engineering and mathematics.
  • An Introduction to Mathematical Analysis

    International Series of Monographs on Pure and Applied Mathematics
    • 1 Edición
    • Robert A. Rankin
    • I. N. Sneddon + 2 más
    • Inglés
    An Introduction to Mathematical Analysis is an introductory text to mathematical analysis, with emphasis on functions of a single real variable. Topics covered include limits and continuity, differentiability, integration, and convergence of infinite series, along with double series and infinite products. This book is comprised of seven chapters and begins with an overview of fundamental ideas and assumptions relating to the field operations and the ordering of the real numbers, together with mathematical induction and upper and lower bounds of sets of real numbers. The following chapters deal with limits of real functions; differentiability and maxima, minima, and convexity; elementary properties of infinite series; and functions defined by power series. Integration is also considered, paying particular attention to the indefinite integral; interval functions and functions of bounded variation; the Riemann-Stieltjes integral; the Riemann integral; and area and curves. The final chapter is devoted to convergence and uniformity. This monograph is intended for mathematics students.
  • Anti-Chance

    A Reply to Monod's Chance and Necessity
    • 1 Edición
    • E. Schoffeniels + 1 más
    • T Swain
    • Inglés
    Anti-Chance: A Reply to Monod's Chance and Necessity reflects the most fundamental biological facts about human behavior, representing constants that are difficult to modify by religious, moral or social constraints. This book provides a simplistic view which neglects the profound meaning of physico-chemical determinism and most elementary rules of structuration of biological systems. The topics discussed include the probabilities of chance, thermodynamics and biological order, basis for a theoretical biology, and great inventions. The molecular basis of instinct, speech and consciousness, cybernetics and biology, and the structure of chance are also deliberated in this text. This publication is beneficial to students and researchers interested in the analysis of human affairs.
  • Professional Indemnity Claims

    An Architect's Guide
    • 1 Edición
    • N P G Thomas
    • Inglés
  • Magnetism in Crystalline Materials

    Applications of the Theory of Groups of Cambiant Symmetry
    • 1 Edición
    • A. P. Cracknell
    • D. ter Haar
    • Inglés
    Magnetism in Crystalline Materials covers the applications of the theory of groups of cambiant symmetry and the physical properties of magnetically ordered crystalline solids. This book is divided into eight chapters; the first of which discusses the macroscopic properties of magnetic crystals. The structures of magnetically ordered crystals are then explained; this topic is followed by discussions on the theory of corepresentations; magnetic phase transitions; and the tensor properties of magnetic crystals. This text also looks into topics on electrons, lattice vibrations, and spin waves. This selection will be valuable to physicists and to others interested in the magnetism of crystalline materials.
  • Structural Analysis Systems

    Software — Hardware Capability — Compatibility — Applications
    • 1 Edición
    • A. Niku-Lari
    • Inglés
    Structural Analysis Systems: Software—Hardware Capability—Compatibi... Volume 2 is a practical guidebook on structural analysis systems and their applications. It provides detailed information about a specific software, its postprocessor capabilities and limitations, computer-aided design connection, and compatibility with the most common computers. Several practical examples from industry with computer and user cost are given. This volume consists of 17 chapters and begins with a description of AFAG, a dual finite element analysis program based on the flexibility method. The discussion then turns to the AQUADYN system, designed primarily to reduce the hydrodynamics problem to a linear integral equation for large floating or immersed structures. The following chapters focus on other structural analysis computer programs such as BOSOR4 and BOSOR5, INFESA, MEF/MOSAIC, RCAFAG, and STRUGEN. Some general purpose and special purpose finite element programs used for stress analysis of composite materials are also considered. This book will be a useful resource for practitioners in scientific and industrial disciplines such as mechanical or civil engineering, informatics, applied mathematics, and computer science.
  • Identification and System Parameter Estimation 1982

    Proceedings of the Sixth IFAC Symposium, Washington DC, USA, 7-11 June 1982
    • 1 Edición
    • G. A. Bekey + 1 más
    • Inglés
    Identification and System Parameter Estimation 1982 covers the proceedings of the Sixth International Federation of Automatic Control (IFAC) Symposium. The book also serves as a tribute to Dr. Naum S. Rajbman. The text covers issues concerning identification and estimation, such as increasing interrelationships between identification/estim... and other aspects of system theory, including control theory, signal processing, experimental design, numerical mathematics, pattern recognition, and information theory. The book also provides coverage regarding the application and problems faced by several engineering and scientific fields that use identification and estimation, such as biological systems, traffic control, geophysics, aeronautics, robotics, economics, and power systems. Researchers from all scientific fields will find this book a great reference material, since it presents topics that concern various disciplines.
  • Electronic Devices and Circuits

    In Three Volumes
    • 1 Edición
    • G. J. Pridham
    • N. Hiller
    • Inglés
    Electronic Devices and Circuits, Volume 2 provides a comprehensive coverage of the concepts involved in electronic devices and circuitries. The text first details the network theory, and then proceeds to covering electronics in the succeeding chapters. The coverage of the book includes transmission lines; high-frequency valves and transistors; amplifiers; oscillators; and multivibrator and trigger circuits. The text also covers several concerns in electronics, such as the physics of semiconductor devices; stabilization of power supplies; and feedback. The book will be of great use to students of electrical engineering and other electronics related degree.
  • Introduction to the Theory of Shells

    Structures and Solid Body Mechanics
    • 1 Edición
    • Clive L Dym
    • B. G. Neal
    • Inglés
    Introduction to the Theory of Shells provide a brief introduction to the foundations of shell theory, and to some of the important problems that can be tackled within the framework of shell theory. The book discusses topics on the Lamé problem and derivation of beam theory; the basic postulates, or assumptions of shell theory; membrane shells and the bending of circular cylinders; and axisymmetric vibrations of circular cylinders. Mathematicians and students of mathematics will find the book invaluable.
  • The Julius Petersen Graph Theory Centennial

    • 1 Edición
    • L.D. Andersen + 7 más
    • Inglés
    Julius Petersen's paper, Die Theorie der regulären graphs in Acta Mathematica, volume 15 (1891), stands at the beginning of graph theory as we know it today.The Danish group of graph theorists decided in 1985 to mark the 150th birthday of Petersen in 1989, as well as the centennial of his paper.It was felt that the occasion called for a presentation of Petersen's famous paper in its historical context and, in a wider sense, of Petersen's life and work as a whole. However, the readily available information about Julius Petersen amounted to very little (not even a full bibliography existed) and virtually nothing was known about the circumstances that led him to write his famous paper.The study of Petersen's life and work has resulted in several papers, in particular a biography, a bibliography, an annotated edition of the letters surrounding Petersen's paper of 1891, an analysis of Petersen's paper and an annotated edition of parts of Petersen's correspondence with Sylow on Galois theory. The first four of these papers, together with a survey of matching theory, form the first part of this book. In addition to these five special papers, there are papers submitted in the celebration of the Petersen centennial.
  • A Course of Higher Mathematics

    Adiwes International Series in Mathematics, Volume 3, Part 1
    • 1 Edición
    • V. I. Smirnov
    • A. J. Lohwater
    • Inglés
    Linear Algebra: A Course of Higher Mathematics, Volume III, Part I deals with linear algebra and the theory of groups that are usually found in theoretical physics. This volume discusses linear algebra, quadratic forms theory, and the theory of groups. The properties of determinants are discussed for determinants offer the solution of systems of equations. Cramer's theorem is used to find the solution of a system of linear equations that has as many equations as unknowns. Linear transformations and quadratic forms, for example, coordinate transformation in three-dimensional space and general linear transformation of real three-dimensional space, are considered. The formula for n-dimensional complex space and the transformation of a quadratic form to a sum of squares are analyzed. The latter is explained by using Jacobi's formula to arrive at a significant form of the reduction of a quadratic form to a sum of squares. The basic theory of groups, linear representations of groups, and the theory of partial differential equations that is the basis of the formation of groups with given structural constants are explained. This book is recommended for mathematicians, students, and professors in higher mathematics and theoretical physics.
  • Alicyclic Compounds

    A Modern Comprehensive Treatise
    • 1 Edición
    • Malcolm Sainsbury
    • Inglés
    Rodd's Chemistry of Carbon Compounds, Volume II: Alicyclic Compounds focuses on alicyclic chemistry. The book first ponders on acyclic and monocyclic monoterpenoids, including artemisyl, santolinyl, chrysanthemyl, and other irregular systems; naturally occurring halogenated monoterpenoids; cyclobutanes; and tetramethylcyclohexa... The text discusses the carotenoid group of natural products. Trends in carotenoid chemical research; improved methodology; optical isomerism including aliene isomerism; and geometrical isomerism are described. The book discusses cycloheptanes and cyclooctanes, large alicyclic ring systems, and polycarbonic compounds with separate ring systems and spiro compounds. The text describes polycyclic compounds and polycarbocyclic bridged ring compounds, and then discusses bicarbocyclic natural products. The Wagner-Meerwein rearrangement; camphor and related compounds; fenchone and related compounds; and carane, thujane, and pinane groups are also considered. The text is a valuable reference for readers interested in the study of carbon compounds.
  • Newnes Telecommunications Pocket Book

    • 1 Edición
    • E. A. Edis + 1 más
    • Inglés
    Newnes Telecommunications Pocket Book discusses the equipment, systems, and techniques used in the telecommunications network. The book is comprised of 25 chapters that are organized into four parts. The first part covers components of particular relevance to telecommunications. The second part deals with commonly used circuit assemblies such as filters, attenuators, modems, and digitizers. The third part discusses organization and standards. The last part talks about telecommunications network practice, including analogue and digital, fixed and mobile systems. This text will be of great use to professionals in the telecommunications industry.
  • The Designer's Guide to the Cortex-M Processor Family

    • 2 Edición
    • Trevor Martin
    • Inglés
    The Designer’s Guide to the Cortex-M Microcontrollers gives you an easy-to-understand introduction to the concepts required to develop programs in C with a Cortex-M based microcontroller. The book begins with an overview of the Cortex-M family, giving architectural descriptions supported with practical examples, enabling you to easily develop basic C programs to run on the Cortex-M0/M0+/M3 and M4 and M7. It then examines the more advanced features of the Cortex architecture such as memory protection, operating modes, and dual stack operation. Once a firm grounding in the Cortex-M processor has been established the book introduces the use of a small footprint RTOS and the CMSIS-DSP library. The book also examines techniques for software testing and code reuse specific to Cortex-M microcontrollers. With this book you will learn: the key differences between the Cortex-M0/M0+/M3 and M4 and M7; how to write C programs to run on Cortex-M based processors; how to make the best use of the CoreSight debug system; the Cortex-M operating modes and memory protection; advanced software techniques that can be used on Cortex-M microcontrollers; how to use a Real Time Operating System with Cortex-M devices; how to optimize DSP code for the Cortex-M4; and how to build real time DSP systems.
  • Progress in Biophysics and Biophysical Chemistry

    Progress Series, Volume 9
    • 1 Edición
    • J. A. V. Butler + 1 más
    • Inglés
    Progress in Biophysics and Biophysical Chemistry, Volume 9 reviews developments in biophysics and biophysical chemistry and covers topics such as the kinetics of reactions between hemoglobin and gases; the hydrodynamics of the arterial circulation; visual pigments in humans and animals and their relation to seeing; and gradient centrifugation of cell particles. The conversion of mechanical energy into electrical energy in certain mechanoreceptors is also discussed. This book is comprised of seven chapters and begins with an overview of the general properties of hemoglobin and its reactions with gases, and how such reactions are affected by temperature. The intermediate compound theory and the combination of sheep hemoglobin with carbon monoxide are also considered. The following chapters explore the diffusion and simultaneous chemical reaction velocity in hemoglobin solutions and red cell suspensions; the hydrodynamic aspects of the arterial circulation; determination of molecular dimensions from light scattering data; and the relation of receptor potentials to the activity of complex mechanoreceptor organs containing hair cells. The final chapter is devoted to the theory and applications of the gradient centrifugation of cell particles. This volume will be of interest to both biophysicists and biochemists.
  • Progress in Reaction Kinetics

    Volume 6
    • 1 Edición
    • K. R. Jennings + 1 más
    • Inglés
    Progress in Reaction Kinetics, Volume 6 covers various aspects of kinetics. It presents quantitative data on the reaction rates observed in hydrocarbon-active nitrogen systems, noble gases, acids and bases, and rare gas metastable atoms. Comprised of six chapters, the volume begins by discussing the reactions of nitrogen atoms with hydrocarbons. It then illustrates the development of flash protolysis techniques and moves on to chemi-ionization and chemical applications of rare gases. The text concludes by describing salt and medium effects in ionic reactions in aqueous solutions. Students and scientists who wish to increase their understanding of reactions occurring in various chemical reaction systems will find this volume invaluable.
  • The Nature of Hadrons and Nuclei by Electron Scattering

    Proceedings of the International School of Nuclear Physics, Erice, 16–25 July 1989
    • 1 Edición
    • Amand Faessler
    • Inglés
    Progress in Particle and Nuclear Physics, Volume 24: The Nature of Hadrons and Nuclei by Electron Scattering covers the proceedings of the International School of Nuclear Physics. The book presents 24 papers that discuss topics concerning hadrons and nuclei. The coverage of the text includes electron scattering and few-nucleon systems; occupation probabilities of shell-model orbitals; and the response function of nuclear matter. The book also tackles the internal spin structure of the nucleon; parity-violating electron scattering; and hard pion exchange currents and the backward deuteron disintegration. The text will be of great use to scientists involved in hadron and nucleon research.
  • The Earth's Middle Atmosphere

    • 1 Edición
    • W. L. Grose + 2 más
    • Inglés
    The Earth’s Middle Atmosphere covers the Proceedings of Symposium C2 and the Topical Meetings of the COSPAR Interdisciplinary Scientific Commissions A and C (Meetings A7 and C4) of the COSPAR 29th Plenary Meeting held in Washington, DC, USA, on August 28-September 5, 1992. The first part covers the impact of the Upper Atmosphere Research Satellite (UARS) observations on middle atmosphere science. This topic includes the early results of the validation and the application of the Cryogenic Limb Array Etalon Spectrometer (CLAES) data, which is an instrumental approach to the measurement of thermal infrared spectral emission from the atmospheric limb. An overview of the Halogen Occultation Experiment and the use of the UARS data in the NOAA stratospheric monitoring are also discussed in this part. It also includes the observed solar UV irradiance variations of importance to middle atmosphere energetic and photochemistry, as well as the stratospheric and mesospheric observations with the Improved Stratospheric and Mesospheric Sounder. The second part of the book tackles the energetics and chemistry of the middle atmosphere as well as the dynamics and coupling of the middle atmosphere to regions above and below. Results on the validation of the UARS wind and temperature measurements at and above the mesopause comprise the third part of this book. This book will be a great value to geophysicists and atmospheric scientists.
  • Bulk Crystal Growth

    Part B. Bulk Crystal Growth
    • 1 Edición
    • Volumen 2A-2B
    • D. T. J. Hurle
    • Inglés
    Volume 2 is divided into 2 parts. Part A reviews the principal techniques used for bulk single crystal growth from melt, solution and vapour and for industrial mass crystallisation starting, in chapter 1, with nature's techniques. The growth of synthetic crystals of a wide range of materials for research and commercial use is covered in depth, with emphasis placed on those techniques which are of current importance: techniques of only historical interest have not been included.Part B covers the basic mechanisms and dynamics of melt and solution growth covering segregation, melt convection, stress in the cooling crystal, polyphase solidification, growth in gels, spherulitic crystallisation and the numerical modelling of Bridgman and Czochralski growth processes.
  • Progress in Biophysics and Biophysical Chemistry

    Progress Series, Volume 7
    • 1 Edición
    • J. A. V. Butler + 1 más
    • Inglés
    Progress in Biophysics and Biophysical Chemistry, Volume 7 focuses on the applications of physical or physicochemical ideas and methods to biological problems, including the use of isotopes to investigate metabolic processes. Other subjects discussed in detail are the electric organs of fishes; the thermodynamics of agglutination of red cells; muscle structure and function; and the structure of bone. This book is comprised of seven chapters and begins with a review of the mechanisms of discharge of electric organs in fish in the contexts of general and comparative electrophysiology, paying particular attention to synaptic excitability and the involvement of several electrogenic components in the reflex discharge. The evolution of electric organs in fish is also discussed. The following chapters explore the thermodynamics of isohemagglutinins; use of labeled plasma proteins to study nutritional problems; use of isotopes to analyze intermediary metabolism; and X-crystal analysis of bone. The final two chapters are devoted to muscle structure and theories of contraction, chloroplast structure, and energy conversion in photosynthesis. This volume will be of interest to biophysicists, physicists, and physical chemists working with biological materials.
  • Vistas in Astronomy

    Volume 28
    • 1 Edición
    • P. Beer + 2 más
    • Inglés
  • Progress in Reaction Kinetics

    Volume 10
    • 1 Edición
    • K. R. Jennings + 1 más
    • Inglés
    Progress in Reaction Kinetics, Volume 10 discusses several topics concerning reaction kinetics. The first chapter tackles the dynamics of reactive collisions; this chapter also covers the experimental methods, theoretical methods, atom-molecule reactions, and molecule-molecule reaction. The second chapter discusses reactive, inelastic, and radiative processes involving electronically excited atoms, which include emission process, energy transfer, ionization process, and chemical reaction. The third chapter tackles luminescence kinetics of metal complexes in solution; this chapter includes the theoretical and experimental background, paradigm problem, and ligand-centered luminescent systems. This book will be of great use to researchers whose work involves kinetics research.
  • Festkörper Probleme XI

    Advances in Solid State Physics
    • 1 Edición
    • O. Madelung
    • Inglés
    Festkörperprobleme XI: Advances in Solid State Physics reviews advances in solid state physics and covers topics ranging from localized vibrational modes in semiconductors to isoelectric impurities in semiconductors, deep impurities, and liquid crystals. Elastic and inelastic electron tunneling through potential barriers in solids is also discussed, along with plasma physics and astrophysics. This book is comprised of 14 chapters and begins with a review of the theoretical and experimental requirements for the observation of high frequency, localized vibrational modes of impurities in a crystal lattice. The reader is then introduced to the properties of deep impurity levels in semiconductors. Some typical examples of isoelectronic impurities are presented, and theories of isoelectronic traps are considered. Subsequent chapters focus on the properties of the various types of liquid crystalline phases (nematic, cholesteric, and smectic); a few astrophysical problems for which the properties of the astrophysical plasma are important; and the use of stochastic models to probe the kinetics of phase transitions. Experimental results for elastic and inelastic electron tunneling through potential barriers in solids are also presented. This monograph will be of interest to physicists.
  • Mechanics of Structured Media

    Proceedings of the International Symposium on the Mechanical Behaviour of Structured Media, Ottawa, May 18-21, 1981
    • 1 Edición
    • A.P.S. Selvadurai
    • Inglés
  • Problems in Strength of Materials

    • 1 Edición
    • N. M. Belyayev
    • Inglés
    Problems in Strength of Materials focuses on processes and methodologies involved in assessing the strength of materials. The book first discusses tension and compression. Statistically determinate and indeterminate systems; self weight; and calculation of flexible wires and cables are explained. The text also focuses on state of compound stress. Topics include uniaxial and plane states of stress; calculation of thin- and thick-walled vessels; and contact stresses. The shear and torsion of round bars is also considered. The text also takes a look at plane flexure. Calculation of composite beams; second moments of area of plane figures; construction of shear force and bending moment diagrams; and normal and shear stresses accompanying flexure are underscored. The text discusses the determination of deformations accompanying flexure and calculation of statically indeterminate systems. The book also describes combined loading, method of allowable loads, and dynamic and continuous loading. The text is highly recommended for readers interested in the processes and methodologies in determining the strength of materials.
  • German Microelectronics Data 1968–69

    Pergamon Electronics Data Series
    • 1 Edición
    • G. W. A. Dummer + 2 más
    • Inglés
  • Tables of The Legendre Functions P—½+it(x)

    Mathematical Tables Series
    • 1 Edición
    • M. I. Zhurina + 1 más
    • Inglés
    Tables of the Legendre Functions P–½+iτ (X), Part I tabulates in detail the Legendre spherical functions of the first kind Pv(x) with complex index v = – ½ + iτ and real values of X > – 1. P–½+iτ (X) plays an important role in mathematical physics and are used in solving boundary value problems in potential theory for domains bounded by cones, hyperboloids of revolution, two intersecting spheres, or other second order surfaces. These Legendre functions are also of theoretical interest in connection with the Meler-Fok integral expansion. This book is devoted to the tables of P–½+iτ (X) and coefficients in the asymptotic formula. Some properties of the functions P–½+iτ (X) and description of the tables are also discussed. This publication is a good source for mathematical physicists and students conducting work on Legendre functions P–½+iτ (X).
  • Programming—ALGOL

    • 1 Edición
    • D. J. Malcolme-Lawes
    • Inglés
    Programming—ALGOL is an instructional book on how to write programs using the Algol language. The book starts with an introduction to computers. The Algol language, which runs on instructions typed or punched on strips of paper by the flexowriter, is explained. The text also compares the instructions used in Algol with words in the English language. The command instructions, calculation of numbers, and printing the output are discussed. After a brief introduction into what a program is, the book gives other commands to be added and improve the program. A sample program for repeating calculations is shown with different variables inputted to the program, and then arranging these for the output. The text then introduces the label and the block parts of the program, especially in procedures when several similar sets of commands are required. After the Algol syntax is explained, the different techniques used in programming are considered. In getting a problem into a form and making translation to Algol easier, the flow diagram is introduced. The process of actually running the program by compiling it, using data and program tapes, then begins. The text makes for interesting reading for computer programming instructors, students of introductory programing, and for readers who are interested in the history of computer programming.
  • Structure of the Moon's Surface

    • 1 Edición
    • Gilbert Fielder
    • Inglés
    Structure of the Moon's Surface focuses on the importance of certain features of the Moon's surface that have frequently been disregarded in the past, largely because of lack of knowledge of them. Topics covered include the librations of the Moon; height determinations of the points on the lunar surface; luminous intensity and luminescence of the lunar rocks; the color of moonlight and composition of the Moon's surface; and the Moon's temperature and atmosphere. This book is comprised of 14 chapters and begins with a review of important physical problems associated with the Moon, including its motion and figure as well as the luminous intensity and luminescence of its rocks. The following chapters discuss the polarization of light reflected by the Moon; the problem of the Moon's atmosphere; the probable nature of the Moon's surface; and changes occurring on the Moon. The Moon's ray and grid systems, lattice patterns, rilles and faults, and distribution and frequency of craters are also considered. The final chapter is devoted to the origin of the Moon's surface. This monograph will be of use to both professional and amateur lunar astronomers.
  • The Process of Learning Mathematics

    The Commonwealth and International Library: Mathematical Topics
    • 1 Edición
    • L. R. Chapman
    • Inglés
    The Process of Learning Mathematics is a collection of essays from a two-term course of intercollegiate lectures for students of B.Ed. degree. This collection starts with two different views on the nature of mathematics. One essay discusses the role of intuition in understanding mathematics, while another paper expounds on the role of logic. This book then discusses the generalization, structure, and approximations used in teaching mathematics, and emphasizes the problems of applied mathematics and technology pertaining to equations of motion, mathematical representation of physical phenomena, or in relations such as conservation of matter. One paper reviews Piaget's studies on the development of children's thinking process, noting that teachers should consider the level of thinking the pupil uses when designing his teaching material. Another essay deals with how the existing knowledge in a student can affect new kinds of learning through assimilation and accommodation. This book then describes the use of symbols and "reflective intelligence," addressing reflective activities, communication, and the contribution of symbols. This text then discusses computer-assisted education and several mathematical teaching or learning experiments. This compendium can prove useful for mathematics majors, educators, school administrators, and math teachers.
  • A Collection of Problems in Analytical Geometry

    Analytical Geometry in the Plane
    • 1 Edición
    • D. V. Kletenik
    • W. J. Langford + 1 más
    • Inglés
    A Collection of Problems in Analytical Geometry, Part I: Analytical Geometry in the Plane is a collection of problems dealing with higher analytical geometry. The book discusses elementary problems dealing with plane analytical geometry. The text presents topics on the axis and intervals on an axis and coordinates on a straight line. The book also defines what a rectangular Cartesian coordinates in a plane is, the division of an interval in a given ratio, and shows how to calculate the area of a triangle. The equation of a curve, the functions of two variables, and the concept of an equation of a curve are explained by the use of examples and problems. The author also addresses the geometrical properties of curves of the second order, the equations of a straight line, a circle, an ellipse, a hyperbola, and a parabola. The text then discusses the general theory of second-order curves and emphasizes the equations of the central curves of the second order. The author cites the simplification of these equations as being applicable to theoretical mechanics. This collection of problems can be used by teachers of analytical geometry and their students.
  • Watershed 89

    The Future for Water Quality in Europe
    • 1 Edición
    • D. Wheeler + 2 más
    • Inglés
  • A Course of Mathematics for Engineers and Scientists

    • 1 Edición
    • Brian H. Chirgwin + 1 más
    • Inglés
    A Course of Mathematics for Engineers and Scientists, Volume 4 focuses on mathematical methods required in the more advanced parts of physics and engineering. Organized into five chapters, this book begins by elucidating vector analysis and the differential and integral operations and theorems concerning vectors. Chapter II shows solution of ordinary and some partial differential equations. Chapter III addresses the properties of Bessel, Legendre, Laguerre, and Hermite functions that commonly occur in the solution of boundary and initial value problems. The last two chapters detail the differential equations of field lines and level surfaces, as well as the matrices. This book will be useful to undergraduate students so that they can appreciate and use the mathematical methods required in the more advanced parts of physics and engineering.
  • Real Time Programming 1983

    Proceedings of the 12th IFAC/IFIP Workshop, Hatfield, UK, 29-31 March 1983
    • 1 Edición
    • G. M. Bull
    • Inglés
    Real Time Programming 1983 contains the proceedings of the 12th IFAC/IFIP Workshop held at Hatfield, UK on March 29-31, 1983. The book organizes the papers of the workshop into four categories: Programming Support Environments; Testing Real-Time Programs; Databases for Real-Time Systems; and Languages and Language Implementations. The papers on Programming Support Environments category cover application-oriented requirements specifications, configuration control, and design description languages of real-time programming. Papers on Databases for Real-Time Systems category talk about wide range of aspects of the problem in the system. Five papers on Testing Real-Time Programs category show importance of structure in producing software; principles in testing and reliability issues; use of separate computer for measuring and tracing real-time software; set of tools and methods for testing real-time software; and set of debugging facilities incorporated into the language Modula. The Languages and Language Implementations category explains the exception handling mechanisms provided by languages; performance of the run-time support to task management in ADA; and implementation of multi-tasking and inter-task message passing for Industrial Real-Time Basic.
  • Real Time Programming 1977

    Proceedings of the IFAC/IFIP Workshop, Eindhoven, Netherlands, 20-22 June 1977
    • 1 Edición
    • C. H. Smedema
    • Inglés
    Real Time Programming 1977 covers the proceedings of the IFAC/IFIP Workshop, held in Eindhoven, Netherlands, on June 20-22, 1977. The book focuses on the languages, methods, and techniques in real time programming, including debugging systems, hardware, parallel programs, and multi-processor systems. The selection first discusses experience with the programming language modula; flexible approaches to process communication; and high level process control “Esprit“ and its source level debugging system “Solda“. The book then takes a look at software tools for designing and realizing distributed systems in process control and steps in implementing a parallel code executor, including system decomposition, challenge of the new hardware, and situation of real-time programming. The publication reviews software specification language for sequential processes and petri nets for proving correctness of parallel programs. Concerns include state graphs as a model for automata and petri net application to programs. The text also focuses on real-time distributed processing system using GEC 4000 series computers; integration of high-level interpretive software with microprocessor-based distributed control systems; and software approach for multi-processor systems. The selection is a vital reference for readers interested in real-time programming.
  • Film in Higher Education and Research

    Proceedings of a Conference Held at the College of Advanced Technology, Birmingham, in September 1964
    • 1 Edición
    • Peter D. Groves
    • Inglés
  • Strength of Metals and Alloys

    Proceedings of the 5th International Conference, Aachen, Federal Republic of Germany, August 27-31, 1979
    • 1 Edición
    • P. Haasen + 2 más
    • Inglés
    Strength of Metals and Alloys is a collection of papers presented at the 5th International Conference on the Strength of Metals and Alloys held in Aachen, Germany, on August 27-31, 1979. Contributors explore advances that have been made in understanding the strength of metals and alloys and cover topics ranging from plasticity and crystal structure to microstructural models for friction and wear; dynamical effects in deformation; and microscopic mechanisms of metal fatigue. This volume is comprised of 13 chapters and begins with an analysis of the differences between the plastic deformation of face-centered cubic, hexagonal close-packed, and body-centered cubic metals in relation to intrinsic dislocation mobilities resulting from the interaction of the dislocation core with the crystal lattice. The reader is then introduced to dislocation models for fatigue and their application to cases of friction and wear. The following chapters focus on the mechanisms controlling the creep of single phase metals and alloys; precipitation and dispersion hardening; deformation of polycrystals; solid solution hardening; and superposition of alloy hardening, strain hardening, and dynamic recovery. The results of in situ deformation experiments using high-voltage electron microscopy are also presented. The final chapter is devoted to the mechanisms underlying the recovery and recrystallization of doped tungsten. This monograph will be a valuable resource for metallurgists and materials scientists.
  • The Chemistry of Arsenic, Antimony and Bismuth

    Pergamon Texts in Inorganic Chemistry
    • 1 Edición
    • J. D. Smith
    • J. C. Bailar + 2 más
    • Inglés
    Pergamon Texts in Inorganic Chemistry, Volume 2: The Chemistry of Arsenic, Antimony and Bismuth focuses on the physical and chemical properties of arsenic, antimony, and bismuth. This book discusses the alloys and intermetallic compounds; general aspects of the chemistry of arsenic; salts of antimony and bismuth; and organometallic compounds. The complexes of Arsenic(V), Antimony(V), and Bismuth(V), and mixed valency compounds and mechanisms of redox reactions are also elaborated. This text describes the chemical and physical properties of compounds, such as hydrides EH3, halides EX3, oxides E2O3, halides EX5, sulfides E2S5, oxides E2O5, and related oxyacids. This publication is intended for chemical engineering students and chemists researching on the characteristics of arsenic, antimony, and bismuth.