Saltar al contenido principal
Elsevier

Libros en Ciencias Aeroespaciales

  • Data-Efficient Intelligent Fault Detection and Diagnosis for Unmanned Aerial Vehicles

    • 1 Edición
    • Chuanjiang Li
    • Inglés
    As low-altitude economy initiatives accelerate the deployment of UAVs in logistics, inspection, and emergency response, the need for safe and autonomous UAV operation has become increasingly critical. Data-Efficient Intelligent Fault Detection and Diagnosis for Unmanned Aerial Vehicles presents a comprehensive approach to intelligent fault detection and diagnosis in UAV systems under data-scarce and complex flying conditions. Focusing on the flight control system - the core of UAV autonomy - it addresses key challenges such as limited fault samples, class imbalance, distribution shifts, and data privacy. The book explores data-efficient learning techniques, including generative adversarial models, meta-learning, and federated learning to enable accurate and robust diagnosis of sensor, actuator, and control surface faults. Additionally, it introduces a data-knowledge hybrid driven framework that maps quantitative results to a structured fault ontology, enhancing interpretability and maintenance efficiency. By combining theory with real-world cases, this book provides researchers, engineers, and graduate students with practical tools and insights for developing reliable and intelligent UAV health monitoring systems to ensure the safety of low-altitude economy.

  • Dynamics of Tethered Satellites and Space Elevators

    • 1 Edición
    • Arun K. Misra + 1 más
    • Inglés
    Dynamics of Tethered Satellites and Space Elevators provides a comprehensive overview of the current state of knowledge of tethered space systems, including their potential applications, history, and a description of past and current space tether missions. This is followed by an in-depth investigation into various aspects of the dynamics and control of rigid and flexible single-tether space systems, tether propulsion, and multi-tether satellite systems. The use of tethers to remove space debris is discussed next alongside other sustainability-relat... considerations, making the content all the more relevant in view of the global pressures that stakeholders in the space sector currently face.An entire section of chapters on the dynamics of partial and full space elevators concludes the volume.

  • Modeling and Simulation of Multiphase and Reactive Flows

    From Fundamentals to Engineering Applications
    • 1 Edición
    • Yu Lv + 3 más
    • Inglés
    Modeling and Simulation of Multiphase and Reactive Flows: From Fundamentals to Engineering Applications offers integrated coverage of state-of-the-art advancements in the study of computational fluid dynamics. The book accompanies readers on a pedagogically progressive journey that exposes them first to the fundamental physics of multicomponent flows and then moves on to more advanced topics in a number of target applications of current interest, with particular emphasis on aerospace, automotive, thermal, and nuclear engineering. A wide spectrum of flows including bubbly flows, liquid atomization, cavitation, chemically reactive flows, spray combustion, hypersonic flows, and detonation motion are discussed.Further cognizance of how to control and manipulate these phenomena is enabled by leveraging powerful technologies for numerical modeling and simulation techniques, with worked-out computational exercises and sample case studies also being featured to encourage practical endeavors to promisingly enhance the performance of many propulsion and energy systems.

  • Orbital Mechanics for Engineering Students

    • 5 Edición
    • Howard D. Curtis
    • Inglés
    Orbital Mechanics for Engineering Students, Fifth Edition is a key text for students of aerospace engineering. While this latest edition has been updated with new content and end-of-chapter problems, it retains its teach-by-example approach that emphasizes analytical procedures, computer-implemented algorithms, and the most comprehensive support package available, including fully worked solutions, PPT lecture slides, and animations of selected topics. Highly illustrated and fully supported with downloadable MATLAB algorithms for project and practical work, this book provides all the tools needed to fully understand the subject.

  • Slosh Dynamics

    Theory and Practice
    • 1 Edición
    • Musaddiq Al Ali
    • Inglés
    Slosh Dynamics: Theory and Practice offers a rigorous and technically rich exploration of fluid dynamics in constrained, partially filled containers, characterized by nonlinear behavior with critical implications across engineering systems. Rooted in the fundamental principles of fluid and solid mechanics, this volume progresses through detailed mathematical modeling and thorough stability assessment of coupled multiphase phenomena, culminating in applied methodologies for controlling and mitigating sloshing effects.The book combines analytical depth with state-of-the-art computational techniques, including finite element, finite volume, and particle-based methods, alongside practical guidance on relevant software tools. It addresses challenges in a wide range of sectors, such as aerospace, marine, automotive, energy, and process industries, through real-world case studies and advanced simulation workflows.Ideated to serve as an authoritative reference resource, Slosh Dynamics supports both academic enquiry and practical engineering applications at the highest level by uniquely bridging the divide between specialized understanding of sloshing-induced behavior and the broader demands of performance optimization and safety-critical design for integrated systems.

  • Adaptive Predefined-Time Attitude Control for Spacecraft

    • 1 Edición
    • Qiang Chen + 3 más
    • Inglés
    Adaptive Predefined-Time Attitude Control for Spacecraft presents the latest advancements in spacecraft control dynamics, with a particular focus on time-bound strategies that guarantee rapid and smooth system stabilization under realistic mission constraints. Rooted in the expertise of scholars with extensive experience in nonlinear and adaptive control, the book establishes a solid theoretical foundation in finite-time and predefined-time formulations before transitioning to sophisticated techniques such as fuzzy logic, dynamic surface control, neural networks, and event-triggered design. Subsequent chapters broaden the scope to encompass multi-spacecraft coordination and time-triggered adaptation, reflecting the growing trend toward autonomy and intelligent systems in modern aerospace applications.Readers are guided through a cohesive suite of state-of-the-art methodologies, along with insights into emerging trends and future frontiers, all engineered to optimize reliability, efficiency, and fault tolerance. Graduate students, early-career researchers, and experienced engineers in both academia and industry will find this volume a comprehensive and indispensable reference for the design and deployment of intelligent attitude control systems in modern flight and satellite missions.

  • Spacecraft Electromagnetic Docking and Separation

    • 1 Edición
    • Keke Shi + 3 más
    • Inglés
    Spacecraft Electromagnetic Docking and Separation solves problems for spacecraft electromagnetic docking and separation control systems using different control methods instead of the widely used proportional–integra... controller or PID control. The book focuses on presenting a variety of control strategies tailored for spacecraft electromagnetic docking and separation that are accompanied by stability proofs that integrate Lyapunov stability theory with sliding mode theory, LMIs-based theorems, model predictive control theories, reinforcement study theories, and other frameworks so the reader can understand how to handle different kinds of disturbances and perturbations in actual orbiting spacecraft.The book also provides a review of magnetic field, the magnetic field force model (both the near-field model and the far-field model), and useful lemmas and dynamic modeling methods of spacecraft relative motion that can serve as first stage analysis for further research, and are especially important in the initial design phase of a spacecraft electromagnetic docking and separation control systems.

  • Advanced Space Propulsion

    Technologies, Missions, and Computer Modeling
    • 1 Edición
    • Michael Paluszek + 5 más
    • Inglés
    Advanced Space Propulsion: Technologies, Missions, and Computer Modeling includes coverage of all these topics in an integrated manner. The volume, written by a team of sector-specific R&D experts, touches upon fundamentals cardinal to the understanding of [i] Orbit theory and its implications for control, estimation, and optimization of trajectory and attitude, and [ii] How each mission is designed (depending primarily on the mass of the payload, but also on how far from Earth the launch vehicle needs to go), and then succeeds in consolidating them with software and computer applications for simulations and modeling. The book continues with a discussion on the complete gamut of in-space propulsion power sources and concludes with both human and robotic mission-related case studies and future implementation examples. The outcome is a carefully calibrated and self-contained resource that will prove to be invaluable for graduate and senior undergraduate students, researchers, scientists, and engineering professionals alike.

  • Key Technologies and Implementation of Spatial Information Networks

    Transmission, Spatiotemporal Measurement, and Cross-Domain Interconnection
    • 1 Edición
    • Jianjun Zhang + 4 más
    • Inglés
    Resilient Integrated Space Information Network: A Space-Based Network for Communication Transmission, Spatiotemporal Measurement and Cross-Domain Interconnection provides readers with expert proposals for top-level architecture design ideas and key technologies for future large-scale, complex space network systems. The book clarifies technical issues and challenges encountered in the development and deployment of large-scale spatial network systems. Presents readers with a detailed analysis of the current status and trends in the field. Basic theory and advanced technology of the deployment and application of communication satellite constellations are described in detail, providing readers with an important reference for theoretical research and engineering practice. The book provides readers technical support for the future construction and implementation of global satellite information networks, greatly enhancing the technological strength of innovation and beyond development in the space field.

  • Collaborative Scheduling for Electromagnetic Detection Satellites

    Model and Reinforcement Learning-Based Evolutionary Algorithms
    • 1 Edición
    • Yanjie Song + 4 más
    • Inglés
    Collaborative Scheduling for Electromagnetic Detection Satellites: Model and Reinforcement Learning-based Evolutionary Algorithms focuses on the models and algorithms related to electromagnetic detection satellite scheduling problems. Sections provide an overview, including background and current state of development and then move on to the basic model of cooperative scheduling and the framework of learning evolutionary algorithms. Next, the book examines cooperative scheduling of homogeneous electromagnetic detection satellites for stationary target detection and reviews research on cooperative planning of heterogeneous electromagnetic detection satellites for low-speed moving target detection. Final sections examine cooperative scheduling of heterogeneous electromagnetic detection satellites for high-speed moving target detection. Readers will find this to be an in-depth introduction to electromagnetic detection satellite problems.

  • Cooperative Control of Spacecraft Formation Flying

    From Anti-Communication Delays to Resources Saving
    • 1 Edición
    • Qinglei Hu + 2 más
    • Inglés
    Cooperative Control of Spacecraft Formation Flying: From Anti-Communication Delays to Resources Saving provides an in-depth, practically focused, exploration of secure cooperative control for spacecraft formation flying that addresses real-world challenges including communication latency, resource constraints, and information security, balancing foundational theory with actionable solutions, tailored to complex, resource-limited environments A comprehensive reference source for aerospace engineers and researchers covering anti-communication delays and resource-saving coordination strategies in spacecraft formation flying. For professionals and researchers in space systems, robotics and control engineering, the book provides detailed descriptions of robust security measures and practical application insights. The integration of secure communication protocols with control methods makes the book particularly relevant for professionals in high-stakes environments, where cyber threats and resource limitations are critical. For space agency mission planners and aerospace cybersecurity experts, the project addresses critical issues in secure, delay-tolerant communication and resource optimization for coordinated spacecraft missions. This enhances the development of secure and resilient communication protocols, which are critical to prevent data breaches and ensure reliable inter-spacecraft coordination in adversarial environments. The integration of advanced algorithms and the emphasis on real-world challenges, particularly the communication security issue, provides readers with a unique perspective that is missing in existing literature. The book equips readers with detailed information on advanced control strategies for multi-spacecraft coordination, particularly methods that address communication delays and optimize resource use.

  • Photonic Laser Propulsion

    • 1 Edición
    • Young K. Bae
    • Inglés
    Photonic Laser Propulsion offers a thrilling glimpse into the future of rapid mass space transportation by surveying one of the most significant breakthrough technologies to overcome the limitations of current propulsion systems based on conventional rocketry.Written by the pioneer of photonic laser propulsion (PLP), this book strives to establish a strong foundational understanding while exploring advanced theoretical concepts. Readers are guided through quantum mechanics, optical resonators, and radiation pressure that underpin this revolutionary thrust mechanism, to then be offered past experimental milestones and cutting-edge demonstrations that trace its evolution and validate its feasibility. A presentation of current application examples as well as long-term development pathways for interplanetary commutes and interstellar probes conclude the excursus, fostering curiosity and charting a course for further research exploration in this dynamic realm.Researchers both in academia and industry and a host of other technical audiences at all levels will think of this volume, which consolidates a growing body of knowledge surrounding PLP, as a key resource for their study or work to enable innovative space endeavors, including human civilization’s expansion within our solar system or interstellar exploration.

  • Internet of Drone Things

    Architectures, Approaches, and Applications
    • 1 Edición
    • Amartya Mukherjee + 2 más
    • Inglés
    As UAV technology is rapidly evolving, a pervasive need for a thorough investigation of its full capabilities has come to the forefront. Internet of Drone Things: Architectures, Approaches, and Applications fulfils this need enabling its readers to easily find the answers they are seeking by providing a comprehensive overview of the topic.This book, in fact, includes fundamental information related to IoDT architecture design and features; reviews the state of the art in hardware and software platforms to deploy, connect, and control drones or swarms of drones; and covers the latest developments in innovative drone-facilitated applications and services that can significantly improve efficiency, productivity, and sustainability of various operations in modern society and a growing number of its industries. Finally, experimental modeling and simulations are accompanied by prototyping examples, which are set to become the benchmark of next-level automation in the field.Internet of Drone Things: Architectures, Approaches, and Applications is, therefore, an invaluable resource for engineering students, researchers, and professionals, as well as sector experts who work to develop new drone standards or to identify new drone technology use and commercialization areas at an international level.

  • Attitude Takeover Control of Failed Spacecraft

    • 1 Edición
    • Panfeng Huang + 4 más
    • Inglés
    Attitude Takeover Control of Failed Spacecraft is both necessary and urgently required. This book provides an overview of the topic and the role of space robots in handling various types of failed spacecraft. The book divides the means of attitude takeover control into three types, including space manipulator capture, tethered space robot capture, and cellular space robot capture. Spacecraft attitude control is the process of controlling the orientation of a spacecraft (vehicle or satellite) with respect to an inertial frame of reference or another entity such as the celestial sphere, certain fields, and nearby objects, etc.It has become increasingly important: with the increasing number of human space launch activities, the number of failed spacecraft has increased dramatically in recent years.

  • Interstellar Travel

    Propulsion, Life Support, Communications, and the Long Journey
    • 1 Edición
    • Les Johnson + 1 más
    • Inglés
    Interstellar Travel: Propulsion, Life Support, Communications, and the Long Journey addresses the technical challenges that must be overcome to make such journeys possible. Leading experts in the fields of space propulsion, power, communication, navigation, crew selection, safety and health provide detailed information about state-of-the-art technologies and approaches for each challenge, along with possible methods based on real science and engineering. This book offers in-depth, up-to-date and realistic technical and scientific considerations in the pursuit of interstellar travel and will be an essential reference for scientists, engineers, researchers and academics working on, or interested in, space development and space technologies. With a renewed interest in space exploration and development evidenced by the rise of the commercial space sector and various governments now planning to send humans back to the moon and to Mars, there is also growing interest in taking the next steps beyond the solar system and to the ultimate destination – planets circling other stars. With the rapid growth in the number of known exoplanets, people are now asking how we might make journeys to visit them.

  • Interaction of Disturbances in Shear Flows

    Bio-based Solutions for Aero- and Hydrodynamic Efficiency
    • 1 Edición
    • Viktor V. Babenko
    • Inglés
    Interaction of Disturbances in Shear Flows aims to provide a comprehensive, in-depth overview of the current state of knowledge on the subject.Authored by a recognized expert with decades of experience and many software patents to his credit, the volume covers advances in computational fluid dynamics to showcase innovative ways to apply physical measurements and visualization patterns to solve various aero- and hydrodynamic problems. It also delves into analytical methodologies to compare and contrast with the theoretical models most commonly used in the field. Additionally, it demonstrates the significance of comprehending and managing disturbances in shear flows, discussing practical applications of the research to optimize the design of aircraft, automotive vehicles, and marine vessels, with a strong emphasis on enhancing aero- and hydrodynamic efficiency, fuel economy, and the reduction of harmful emissions.Academia and industry readers alike will find this a useful resource to equip themselves with the tools needed to understand and address practical engineering challenges encountered in their studies or work.

  • Vibration of Periodic Structures

    • 1 Edición
    • Gautam SenGupta
    • Inglés
    Vibration of Periodic Structures introduces the fundamentals of periodic structure theory by considering the simplest model – wave propagation in an infinitely long periodic spring-mass system. It then shows how the knowledge of the stop and pass bands can be utilized to find the natural frequency distribution in a finite periodic structure. The basic concepts are further extended to wave propagation in infinitely long periodically supported beams and plates; distribution of natural frequencies of a similar structure of finite length; vibration of skin-stringer structures; and structuralacoustic properties of a section of an aircraft fuselage, based on a combination of the finite element method and the periodic structure theory, in a highly cost-effective manner.This book is a valuable resource of information for practicing engineers in various industries, e.g., civil, mechanical, or aerospace engineering, dealing with vibration of structures with periodic properties, including prediction of supersonic flutter characteristics of aerospace structures. It will also prove to be a beneficial reference for researchers involved with wave propagation in metamaterials and phononic devices.“Readers who have wanted a clear and connected account of vibration of periodic structures will find this treatment accessible and stimulating and will want to add this volume to their personal or institutional library.” – Prof. Earl Dowell, Duke University, Durham, NC, USA

  • Wind Tunnel Test Techniques

    Design and Use at Low and High Speeds with Statistical Engineering Applications
    • 1 Edición
    • Colin Britcher + 1 más
    • Inglés
    Wind Tunnel Test Techniques: Design and Use at Low and High Speeds with Statistical Engineering Applications provides an up-to-date treatment of the topic. Beginning with a brief history of wind tunnels and its types and uses, the book goes on to cover subsonic, supersonic and hypersonic wind tunnel design and construction, calibration, boundary corrections, flow quality assessment, pressure surveys, and dynamic testing. It also focuses on wind tunnel facilities, making it useful for both the designer and operator. Engineers and graduate students in aerospace, automotive and similar programs will find this book useful in their work with experimental aerodynamics, gas dynamics, facility design and performance.

  • Hybrid Rocket Propulsion Design Handbook

    • 1 Edición
    • Ashley Chandler Karp + 1 más
    • Inglés
    Hybrid Rocket Propulsion Design Handbook provides system scaling laws, design methodologies, and a summary of available test data, giving engineers all the tools they need to develop realistic hybrid system designs.Important supporting theory from chemistry, thermodynamics, and rocket propulsion is addressed, helping readers from a variety of backgrounds to understand this interdisciplinary subject. This book also suggests guidelines for standardized reporting of test data, in response to difficulties researchers have in working with results from different research institutes.

  • Next Generation CubeSats and SmallSats

    Enabling Technologies, Missions, and Markets
    • 1 Edición
    • Francesco Branz + 3 más
    • Inglés
    Next Generation of CubeSats and SmallSats: Enabling Technologies, Missions, and Markets provides a comprehensive understanding of the small and medium sized satellite approach and its potentialities and limitations. The book analyzes promising applications (e.g., constellations and distributed systems, small science platforms that overachieve relative to their development time and cost) as paradigm-shifting solutions for space exploitation, with an analysis of market statistics and trends and a prediction of where the technologies, and consequently, the field is heading in the next decade. The book also provides a thorough analysis of CubeSat potentialities and applications, and addresses unique technical approaches and systems strategies. Throughout key sections (introduction and background, technology details, systems, applications, and future prospects), the book provides basic design tools scaled to the small satellite problem, assesses the technological state-of-the-art, and describes the most recent advancements with a look to the near future. This new book is for aerospace engineering professionals, advanced students, and designers seeking a broad view of the CubeSat world with a brief historical background, strategies, applications, mission scenarios, new challenges and upcoming advances.

  • Safety Design for Space Systems

    • 2 Edición
    • Tommaso Sgobba + 3 más
    • Inglés
    The lack of widespread education in space safety engineering and management has profound effects on project team effectiveness in integrating safety during design. On one side, it slows down the professional development of junior safety engineers, while on the other side it creates a sectarian attitude that isolates safety engineers from the rest of the project team. To speed up professional development, bridge the gap within the team, and prevent hampered communication and missed feedback, the entire project team needs to acquire and develop a shared culture of space safety principles and techniques.The second edition of Safety Design for Space Systems continues to address these issues with substantial updates to chapters such as battery safety, life support systems, robotic systems safety, and fire safety. This book also features new chapters on crew survivability design and nuclear space systems safety. Finally, the discussion of human rating concepts, safety-by-design principles, and safety management practices have also been revised and improved. With contributions from leading experts worldwide, this second edition represents an essential educational resource and reference tool for engineers and managers working on space projects.

  • ADCS - Spacecraft Attitude Determination and Control

    • 1 Edición
    • Michael Paluszek
    • Inglés
    ADCS - Spacecraft Attitude Determination and Control provides a complete introduction to spacecraft control. The book covers all elements of attitude control system design, including kinematics, dynamics, orbits, disturbances, actuators, sensors, and mission operations. Essential hardware details are provided for star cameras, reaction wheels, sun sensors, and other key components. The book explores how to design a control system for a spacecraft, control theory, and actuator and sensor details. Examples are drawn from the author’s 40 years of industrial experience with spacecraft such as GGS, GPS IIR, Mars Observer, and commercial communications satellites, and includes historical background and real-life examples.

  • Principles of Nuclear Rocket Propulsion

    • 2 Edición
    • William J. Emrich Jr.
    • Inglés
    Principles of Nuclear Rocket Propulsion, Second Edition continues to put the technical and theoretical aspects of nuclear rocket propulsion into a clear and unified presentation, providing an understanding of the physical principles underlying the design and operation of nuclear fission-based rocket engines. This new edition expands on existing material and adds new topics, such as antimatter propulsion, nuclear rocket startup, new fuel forms, reactor stability, and new advanced reactor concepts. This new edition is for aerospace and nuclear engineers and advanced students interested in nuclear rocket propulsion.

  • Whirl Flutter of Turboprop Aircraft Structures

    • 2 Edición
    • Jiří Čečrdle
    • Inglés
    Whirl Flutter of Turboprop Aircraft Structures, Second Edition explores the whirl flutter phenomenon, including theoretical, practical, analytical and experimental aspects of the matter. Sections provide a general overview regarding aeroelasticity, discussions on the physical principle and the occurrence of whirl flutter in aerospace practice, and experimental research conducted, especially from the 60s. Other chapters delve into analytical methods such as basic and advanced linear models, non-linear and CFD based methods, certification issues including regulation requirements, a description of possible certification approaches, and several examples of aircraft certification from aerospace. Finally, a database of relevant books, reports and papers is provided. This updated and expanded second edition covers new chapters including both analytical and experimental aspects of the subject matter.

  • Modern Spacecraft Guidance, Navigation, and Control

    From System Modeling to AI and Innovative Applications
    • 1 Edición
    • Vincenzo Pesce + 2 más
    • Inglés
    Modern Spacecraft Guidance, Navigation, and Control: From System Modeling to AI and Innovative Applications provides a comprehensive foundation of theory and applications of spacecraft GNC, from fundamentals to advanced concepts, including modern AI-based architectures with focus on hardware and software practical applications. Divided into four parts, this book begins with an introduction to spacecraft GNC, before discussing the basic tools for GNC applications. These include an overview of the main reference systems and planetary models, a description of the space environment, an introduction to orbital and attitude dynamics, and a survey on spacecraft sensors and actuators, with details of their modeling principles. Part 2 covers guidance, navigation, and control, including both on-board and ground-based methods. It also discusses classical and novel control techniques, failure detection isolation and recovery (FDIR) methodologies, GNC verification, validation, and on-board implementation. The final part 3 discusses AI and modern applications featuring different applicative scenarios, with particular attention on artificial intelligence and the possible benefits when applied to spacecraft GNC. In this part, GNC for small satellites and CubeSats is also discussed. Modern Spacecraft Guidance, Navigation, and Control: From System Modeling to AI and Innovative Applications is a valuable resource for aerospace engineers, GNC/AOCS engineers, avionic developers, and AIV/AIT technicians.

  • Photovoltaics for Space

    Key Issues, Missions and Alternative Technologies
    • 1 Edición
    • Sheila G. Bailey + 4 más
    • Inglés
    PV has traditionally been used for electric power in space. Solar panels on spacecraft are usually the sole source of power to run the sensors, active heating and cooling, and communications. Photovoltaics for Space: Key Issues, Missions and Alternative Technologies provides an overview of the challenges to efficiently produce solar power in near-Earth space and beyond: the materials and device architectures that have been developed to surmount these environmental and mission-specific barriers. The book is organized in four sections consisting of detailed introductory and background content as well as a collection of in-depth space environment, materials processing, technology, and mission overviews by international experts. This book will detail how to design and optimize a space power system’s performance for power-to-weight ratio, effectiveness at end of operational life (EOL) compared to beginning of operational life (BOL), and specific mission objectives and goals. This book outlines the knowledge required for practitioners and advanced students interested in learning about the background, materials, devices, environmental challenges, missions, and future for photovoltaics for space exploration.

  • Attitude Dynamics and Control of Space Debris During Ion Beam Transportation

    • 1 Edición
    • Vladimir Aslanov + 1 más
    • Inglés
    Attitude Dynamics and Control of Space Debris During Ion Beam Transportation provides an overview of the cutting-edge research around the topic of contactless ion beam transportation for the removal of space debris. This practical guide covers topics such as space debris attitude motion, the motion of rigid materials in an inhomogeneous high-speed rarefied medium, gravity gradient torque, and more. The book examines and compares the various ways to control the spatial motion of space debris, such as engine thrust or altering the direction of the ion beam axis, and offers simple mathematical models for analyzing system behaviors.

  • Aerodynamic Heating in Supersonic and Hypersonic Flows

    Advanced Techniques for Drag and Aero-heating Reduction
    • 1 Edición
    • Mostafa Barzegar Gerdroodbary
    • Inglés
    Aerodynamic Heating in Supersonic and Hypersonic Flows: Advanced Techniques for Drag and Aero-heating Reduction explores the pros and cons of different heat reduction techniques on other characteristics of hypersonic vehicles. The book begins with an introduction of flow feature around the forebody of space vehicles and explains the main parameters on drag force and heat production in this region. The text then discusses the impact of severe heat production on the nose of hypervelocity vehicles, different reduction techniques for aerodynamic heating, and current practical applications for forebody shock control devices. Delivers valuable insight for aerospace engineers, postgraduate students, and researchers.

  • Electrostatic Dust Mitigation and Manipulation Techniques for Planetary Dust

    • 1 Edición
    • Nima Gharib + 2 más
    • Inglés
    Electrostatic Dust Mitigation and Manipulation Techniques for Planetary Dust explains how to control and remove dust in space due to the presence of a vacuum, abrasiveness of dust particles and electrostatic charge on particles. The book introduces innovative technologies that use electrostatic and di-electrophoretic forces to remove and transport small particles away from surfaces. In addition, it discusses how to resolve thermal control problems and reduce lung inhalation and eye irritation problems. The book includes two abrasive wear test devices that were designed to study the rate of volume wear for different materials when subjected to lunar dust simulant of different size ranges. This will be an ideal resource for space system engineers, space exploration researchers, and advanced students and professionals in space engineering.

  • Scramjet Combustion

    Fundamentals and Advances
    • 1 Edición
    • Gautam Choubey + 1 más
    • Inglés
    Scramjet Combustion explores the development of a high-speed scramjet engine operating in the supersonic/hypersoni... range for various air and space transport applications. The book explains the basic structure, components, working cycle, and the relevant governing equations in a clear manner that speaks to both advanced and more novice audiences. Particular attention is paid to efficient air–fuel combustion, looking at both the underlying fundamentals of combustion as well strategies for obtaining optimum combustion efficiency. Methods for reaching the chemically correct air–fuel ratio, subsequent flame, and combustion stabilization as air enters at supersonic speed are also outlined. Further, it includes the continuous on-going efforts, innovations, and advances with respect to the design modification of scramjet combustors, as well as different strategies of fuel injections for obtaining augmented performance while highlighting the current and future challenges.

  • Stress, Vibration, and Wave Analysis in Aerospace Composites

    SHM and NDE Applications
    • 1 Edición
    • Victor Giurgiutiu
    • Inglés
    Stress, Vibration, and Wave Analysis in Aerospace Composites: SHM and NDE Applications presents a unified approach to studying and understanding stress, vibrations and waves in composite materials used in aerospace applications. Combining topics that are typically found across an array of various sources, the book starts by looking at the properties of various composite materials, progresses to coverage of an analysis of stress, vibration and waves and then concludes with a discussion of various structural health monitoring (SHM) and nondestructive evaluation (NDE) techniques and applications based on the analysis developed earlier in the book. Every chapter of the book contains a variety of worked-out examples to illustrate and tie together underlying theory and specific applications. The MATLAB code used to generate these examples is available on the book’s companion website, as are solution documents and additional MATLAB code for problems and exercises featured in each chapter.

  • IoT and Spacecraft Informatics

    • 1 Edición
    • K.L. Yung + 3 más
    • Inglés
    IoT and Spacecraft Informatics provides the theory and applications of IoT systems in the design, development and operation of spacecraft. Sections present a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions, key technologies, protocols, and technical building blocks that combine into complete IoT solutions. The book features the latest advances, findings and state-of-the-art in research, case studies, development and implementation of IoT technologies for spacecraft and space systems. In addition, it concentrates on different aspects and techniques to achieve automatic control of spacecraft. This book is for researchers, PhD students, engineers and specialists in aerospace engineering as well as those in computer science, computer engineering or mechatronics.

  • Space Micropropulsion for Nanosatellites

    Progress, Challenges and Future
    • 1 Edición
    • Kean How Cheah
    • Inglés
    Space Micropropulsion for Nanosatellites: Progress, Challenges and Future features the latest developments and progress, the challenges faced by different researchers, and insights on future micropropulsion systems. Nanosatellites, in particular cubesats, are an effective test bed for new technologies in outer space. However, most of the nanosatellites have no propulsion system, which subsequently limits their maneuverability in space.

  • Biomimicry for Aerospace

    Technologies and Applications
    • 1 Edición
    • Vikram Shyam + 2 más
    • Inglés
    The solutions to technical challenges posed by flight and space exploration tend to be multidimensional, multifunctional, and increasingly focused on the interaction of systems and their environment. The growing discipline of biomimicry focuses on what humanity can learn from the natural world. Biomimicry for Aerospace: Technologies and Applications features the latest advances of bioinspired materials–properties relationships for aerospace applications. Readers will get a deep dive into the utility of biomimetics to solve a number of technical challenges in aeronautics and space exploration. Part I: Biomimicry in Aerospace: Education, Design, and Inspiration provides an educational background to biomimicry applied for aerospace applications. Part II: Biomimetic Design: Aerospace and Other Practical Applications discusses applications and practical aspects of biomimetic design for aerospace and terrestrial applications and its cross-disciplinary nature. Part III: Biomimicry and Foundational Aerospace Disciplines covers snake-inspired robots, biomimetic advances in photovoltaics, electric aircraft cooling by bioinspired exergy management, and surrogate model-driven bioinspired optimization algorithms for large-scale and complex problems. Finally, Part IV: Bio-Inspired Materials, Manufacturing, and Structures reviews nature-inspired materials and processes for space exploration, gecko-inspired adhesives, bioinspired automated integrated circuit manufacturing on the Moon and Mars, and smart deployable space structures inspired by nature.

  • Bistatic Synthetic Aperture Radar

    • 1 Edición
    • Jianyu Yang
    • Inglés
    Bistatic Synthetic Aperture Radar covers bistatic SAR in a comprehensive way, presenting theory, method and techniques, as well as the most recent research and near-future applications. The book begins with imaging principles and characteristics of monostatic SAR, moving on to common and novel problems before presenting theories, methods and experimental system design. The title presents the design of experimental systems, research results and experimental verification. It gives key knowledge from a leading research group, including one of the earliest bistatic side-looking SAR experiments and the first bistatic forward-looking SAR experiment in the world that used two aircraft. Six chapters cover imaging theory, imaging algorithms, parameter estimation, motion compensation, synchronization and experimental verification. The book describes physical concepts simply and clearly and provides concise mathematical derivations.

  • Aircraft Structures for Engineering Students

    • 7 Edición
    • T.H.G. Megson
    • Inglés
    Aircraft Structures for Engineering Students, Seventh Edition, is the leading self-contained aircraft structures course text suitable for one or more semesters. It covers all fundamental subjects, including elasticity, structural analysis, airworthiness and aeroelasticity. Now in its seventh edition, the author has continued to expand the book’s coverage of analysis and design of composite materials for use in aircraft and has added more real-world and design-based examples, along with new end-of-chapter problems of varying complexity.

  • Advanced Approaches in Turbulence

    Theory, Modeling, Simulation, and Data Analysis for Turbulent Flows
    • 1 Edición
    • Paul Durbin
    • Inglés
    Advanced Approaches in Turbulence: Theory, Modeling, Simulation and Data Analysis for Turbulent Flows focuses on the updated theory, simulation and data analysis of turbulence dealing mainly with turbulence modeling instead of the physics of turbulence. Beginning with the basics of turbulence, the book discusses closure modeling, direct simulation, large eddy simulation and hybrid simulation. The book also covers the entire spectrum of turbulence models for both single-phase and multi-phase flows, as well as turbulence in compressible flow. Turbulence modeling is very extensive and continuously updated with new achievements and improvements of the models. Modern advances in computer speed offer the potential for elaborate numerical analysis of turbulent fluid flow while advances in instrumentation are creating large amounts of data. This book covers these topics in great detail.

  • Aviation Fuels

    • 1 Edición
    • Bhupendra Khandelwal
    • Inglés
    Aviation Fuels provides up-to-date data on fuel effects on combustion performance and use of alternative fuels in aircraft. This book covers the latest advances on aviation fuel technologies, including alternative fuels, feedstocks and manufacturing processes, combustion performance, chemical modeling, fuel systems compatibility and the technical and environmental challenges for implementing the use of alternative fuels for aviation. Aviation fuel and combustion researchers, academics, and program managers for aviation technologies will value this comprehensive overview and summary on the present status of aviation fuels.

  • Biojet Fuel in Aviation Applications

    Production, Usage and Impact of Biofuels
    • 1 Edición
    • Cheng Tung Chong + 1 más
    • Inglés
    Biojet fuels have the potential to make an important contribution towards decarbonising the aviation sector. Biojet Fuel in Aviation Applications: Production, Usage and Impact of Biofuels covers all aspects of this sustainable aviation fuel including aviation biofuel public policies, production technologies, physico-chemical properties, combustion performances, techno-economics of sustainable fuel production, sustainability and energywater-food (EWF) nexus. This must-have book also charts the current state of the industry by discussing the relevant industry players who are currently producing alternative aviation fuels and flight tests, while also providing a glimpse of the future of the industry. This comprehensive book is written for undergraduate students, postgraduate students, researchers, engineers and policy makers wanting to build up knowledge in the specific area of biojet fuel or the broader fields of sustainable energy and aeronautics.

  • Fault-Tolerant Attitude Control of Spacecraft

    • 1 Edición
    • Qinglei Hu + 3 más
    • Inglés
    Fault-Tolerant Attitude Control of Spacecraft presents the fundamentals of spacecraft fault-tolerant attitude control systems, along with the most recent research and advanced, nonlinear control techniques. This book gives researchers a self-contained guide to the complex tasks of envisaging, designing, implementing and experimenting by presenting designs for integrated modeling, dynamics, fault-tolerant attitude control, and fault reconstruction for spacecraft. Specifically, the book gives a full literature review and presents preliminaries and mathematical models, robust fault-tolerant attitude control, fault-tolerant attitude control with actuator saturation, velocity-free fault tolerant attitude control, finite-time fault-tolerant attitude tracking control, and active fault-tolerant attitude contour. Finally, the book looks at the future of this interesting topic, offering readers a one-stop solution for those working on fault-tolerant attitude control for spacecraft.

  • Test Techniques for Flight Control Systems of Large Transport Aircraft

    • 1 Edición
    • Yakui Gao + 2 más
    • Inglés
    Test Techniques for Flight Control Systems of Large Transport Aircraft offers theory and practice of flight control system tests. It is a systematic and practical guide, providing insights to engineers in flight control, particularly those working on system integration and test validation. Ten chapters cover an introduction to flight control system tests, equipment tests and validation, software tests and validation, flight control law and flying qualities evaluation, tests of flight control subsystems, integration and validation based on the iron bird, ground-based test, flight-tests, airworthiness tests and validation, and finally, the current status and prospects for flight control tests and evaluation.

  • Dynamics and Simulation of Flexible Rockets

    • 1 Edición
    • Timothy M. Barrows + 1 más
    • Inglés
    Dynamics and Simulation of Flexible Rockets provides a full state, multiaxis treatment of launch vehicle flight mechanics and provides the state equations in a format that can be readily coded into a simulation environment. Various forms of the mass matrix for the vehicle dynamics are presented. The book also discusses important forms of coupling, such as between the nozzle motions and the flexible body.This book is designed to help practicing aerospace engineers create simulations that can accurately verify that a space launch vehicle will successfully perform its mission. Much of the open literature on rocket dynamics is based on analysis techniques developed during the Apollo program of the 1960s. Since that time, large-scale computational analysis techniques and improved methods for generating Finite Element Models (FEMs) have been developed. The art of the problem is to combine the FEM with dynamic models of separate elements such as sloshing fuel and moveable engine nozzles. The pitfalls that may occur when making this marriage are examined in detail.

  • Fundamentals of Aeroacoustics with Applications to Aeropropulsion Systems

    Elsevier and Shanghai Jiao Tong University Press Aerospace Series
    • 1 Edición
    • Xiaofeng Sun + 1 más
    • Inglés
    Fundamentals of Aeroacoustics with Applications to Aeropropulsion Systems from the Shanghai Jiao Tong University Press Aerospace series, is the go-to reference on the topic, providing a modern take on the fundamental theory and applications relating to prediction and control of all major noise sources in aeropropulsion systems. This important reference compiles the latest knowledge and research advances, considering both the physics of aerodynamic noise generation in aero-engines and related numerical prediction techniques. Additionally, it introduces new vortex sound interaction models, a transfer element method, and a combustion instability model developed by the authors. Focusing on propulsion systems from inlet to exit, including combustion noise, this new resource will aid graduate students, researchers, and R&D engineers in solving the aircraft noise problems that currently challenge the industry.

  • CubeSat Handbook

    From Mission Design to Operations
    • 1 Edición
    • Chantal Cappelletti + 2 más
    • Inglés
    CubeSat Handbook: From Mission Design to Operations is the first book solely devoted to the design, manufacturing, and in-orbit operations of CubeSats. Beginning with an historical overview from CubeSat co-inventors Robert Twiggs and Jordi Puig-Suari, the book is divided into 6 parts with contributions from international experts in the area of small satellites and CubeSats. It covers topics such as standard interfaces, on-board & ground software, industry standards in terms of control algorithms and sub-systems, systems engineering, standards for AITV (assembly, integration, testing and validation) activities, and launch regulations. This comprehensive resource provides all the information needed for engineers and developers in industry and academia to successfully design and launch a CubeSat mission.

  • Scramjets

    Fuel Mixing and Injection Systems
    • 1 Edición
    • Mostafa Barzegar Gerdroodbary
    • Inglés
    Scramjet engines are a type of jet engine and rely on the combustion of fuel and an oxidizer to produce thrust. While scramjets are conceptually simple, actual implementation is limited by extreme technical challenges. Hypersonic flight within the atmosphere generates immense drag, and temperatures found on the aircraft and within the engine can be much greater than that of the surrounding air. Maintaining combustion in the supersonic flow presents additional challenges, as the fuel must be injected, mixed, ignited, and burned within milliseconds. Fuel mixing, along with the configuration and positioning of the injectors and the boundary conditions, play a key role in combustion efficiency. Scramjets: Fuel Mixing and Injection Systems discusses how fuel mixing efficiency and the advantage of injection systems can enhance the performance of the scramjets. The book begins with the introduction of the supersonic combustion chamber and explains the main parameters on the mixing rate. The configuration of scramjets is then introduced with special emphasis on the main effective parameters on the mixing of fuel inside the scramjets. In addition, basic concepts and principles on the mixing rate and fuel distribution within scramjets are presented. Main effective parameters such as range of fuel concentration for the efficient combustion, pressure of fuel jet and various arrangement of jet injections are also explained. This book is for aeronautical and mechanical engineers as well as those working in supersonic combustion who need to know the effects of compressibility on combustion, of shocks on mixing and on chemical reactions, and vorticity on the flame anchoring.

  • Stabilization and Dynamic of Premixed Swirling Flames

    Prevaporized, Stratified, Partially, and Fully Premixed Regimes
    • 1 Edición
    • Paul Palies
    • Inglés
    Stabilization and Dynamic of Premixed Swirling Flames: Prevaporized, Stratified, Partially, and Fully Premixed Regimes focuses on swirling flames in various premixed modes (stratified, partially, fully, prevaporized) for the combustor, and development and design of current and future swirl-stabilized combustion systems. This includes predicting capabilities, modeling of turbulent combustion, liquid fuel modeling, and a complete overview of stabilization of these flames in aeroengines. The book also discusses the effects of the operating envelope on upstream fresh gases and the subsequent impact of flame speed, combustion, and mixing, the theoretical framework for flame stabilization, and fully lean premixed injector design. Specific attention is paid to ground gas turbine applications, and a comprehensive review of stabilization mechanisms for premixed, partially-premixed, and stratified premixed flames. The last chapter covers the design of a fully premixed injector for future jet engine applications.

  • Tooling for Composite Aerospace Structures

    Manufacturing and Applications
    • 1 Edición
    • Zeaid Hasan
    • Inglés
    Tooling for Composite Aerospace Structures: Manufacturing and Applications offers a comprehensive discussion on the design, analysis, manufacturing and operation of tooling that is used in the lamination of composite materials and assembly. Chapters cover general topics, the materials that are typically used for tooling, design aspects and recommendations on how to approach the design, and what engineers need to consider, including examples of designs and their pros and cons, how to perform these type of details, and the methods of inspection needed to ensure quality control. The book concludes with an outlook on the industry and the future.

  • Structural Dynamics Fundamentals and Advanced Applications, Volume I

    Volume I
    • 1 Edición
    • Alvar M. Kabe + 1 más
    • Inglés
    The two-volume work, Structural Dynamics Fundamentals and Advanced Applications, is a comprehensive work that encompasses the fundamentals of structural dynamics and vibration analysis, as well as advanced applications used on extremely large and complex systems. Volume I covers Newton’s Laws, single-degree-of-fre... systems, damping, transfer and frequency response functions, transient vibration analysis (frequency and time domain), multi-degree-of-free... systems, forced vibration of single and multi-degree-of-free... systems, numerical methods for solving for the responses of single and multi-degree-of-free... systems, and symmetric and non-symmetric eigenvalue problems. In addition, a thorough discussion of real and complex modes, and the conditions that lead to each is included. Stochastic methods for single and multi-degree-of-free... systems excited by random forces or base motion are also covered. Dr. Kabe’s training and expertise are in structural dynamics and Dr. Sako’s are in applied mathematics. Their collaboration has led to the development of first-of-a-kind methodologies and solutions to complex structural dynamics problems. Their experience and contributions encompass numerous past and currently operational launch and space systems.

  • Structural Dynamics Fundamentals and Advanced Applications, Volume II

    Volume II
    • 1 Edición
    • Alvar M. Kabe + 1 más
    • Inglés
    The two-volume Structural Dynamics Fundamentals and Advanced Applications is a comprehensive work that encompasses the fundamentals of structural dynamics and vibration analysis, as well as advanced applications used on extremely large and complex systems. In Volume II, d’Alembert’s Principle, Hamilton’s Principle, and Lagrange’s Equations are derived from fundamental principles. Development of large structural dynamic models and fluid/structure interaction are thoroughly covered. Responses to turbulence/gust, buffet, and static-aeroelastic loading encountered during atmospheric flight are addressed from fundamental principles to the final equations, including aeroelasticity. Volume II also includes a detailed discussion of mode survey testing, mode parameter identification, and analytical model adjustment. Analysis of time signals, including digitization, filtering, and transform computation is also covered. A comprehensive discussion of probability and statistics, including statistics of time series, small sample statistics, and the combination of responses whose statistical distributions are different, is included. Volume II concludes with an extensive chapter on continuous systems; including the classical derivations and solutions for strings, membranes, beams, and plates, as well as the derivation and closed form solutions for rotating disks and sloshing of fluids in rectangular and cylindrical tanks. Dr. Kabe’s training and expertise are in structural dynamics and Dr. Sako’s are in applied mathematics. Their collaboration has led to the development of first-of-a-kind methodologies and solutions to complex structural dynamics problems. Their experience and contributions encompass numerous past and currently operational launch and space systems.

  • Trends in Development of Accelerated Testing for Automotive and Aerospace Engineering

    • 1 Edición
    • Lev M. Klyatis
    • Inglés
    Accelerated testing (most types of laboratory testing, proving ground testing, intensive field/flight testing, any experimental research) is increasingly a key component for predicting of product’s/process performance. Trends in Development Accelerated Testing for Automotive and Aerospace Engineering provides a completely updated analysis of the current status of accelerated testing, including the basic general directions of testing (methods and equipment) development, how one needs to study real world conditions for their accurate simulation and successful accelerated testing, describes in details the role of accurate simulation in the development of automotive and aerospace engineering, shows that failures are most often found in the interconnections, step-by-step instructions and examples. This is the only book presently available that considers in detail both the positive and negative trends in testing development for prediction quality, reliability, safety, durability, maintainability, supportability, profit, and decreasing life-cycle cost, recalls, complaints and other performance components of the product. The author presents new ideas and offers a unique strategic approach to obtaining solutions which were not possible using earlier. His methodology has been widely implemented, continue to be adopted throughout the world, and leads to advance society through product improvement that can reduce loss of life, injuries, financial losses, and product recalls. It also covers new ideas in development positive and cost- effective trends in testing development, especially accelerated reliability and durability testing (ART/ADT), which includes integration accurate simulation of field/flight influences, safety, human factors, and leads to successful prediction of product performance during pre-design, design, manufacturing, and usage for the product’s service life. Engineers, researchers, teachers and postgraduate/advance... students who are involved in automotive and aerospace engineering will find this a useful reference on how to apply the accelerated testing method to solve practical problems in these areas.