Saltar al contenido principal
Elsevier

Libros en Ingeniería Marina

  • Ships in Waves

    Motions and Operational Impacts
    • 1 Edición
    • Milan Hofman
    • Inglés
    Ships in Waves: Motions and Operational Impacts delivers a structured and in-depth exploration of the core theories and phenomena governing vessel interactions with wave environments. Progressing from fundamental concepts to elaborate formulations, the book supports gradual engagement with complex material, facilitating confident physical understanding. Topics include ship oscillations (both in calm water and under wave excitation), stochastic wave modeling, responses in regular and irregular seas, and the consequences of extreme motions—such as dynamic loads, rolling, slamming, and capsizing.Organized modularly, the contents allow selective study and targeted review based on the reader’s interest or specialization, uniquely bridging the divide between intricate technical knowledge and engineering application. In addition to the essential theoretical framework, cutting-edge advances and rarely covered aspects are also addressed, including wave energy converters and a critical review of the new IMO intact stability criteria.Designed to serve audiences in academic and research contexts, this authoritative volume is especially valuable not only for assessing motion characteristics but also for enhancing system reliability and informing future design strategies for vessels, offshore platforms, floating structures, and other marine installations that demand a nuanced balance of performance, safety, and sustainability.

  • Marine Propulsion for Decarbonization

    • 1 Edición
    • Luca Marchitto + 1 más
    • Inglés
    Achieving the expected, long-term goals related to emission reduction is a key ambition that will entail not only methodical, cutting-edge investigations into new power systems and alternative fuel technologies but also securing broad-based industry adoption.Marine Propulsion for Decarbonization provides essential information for the marine shipping sector to undergo a systemic transformation. This book sets the scene through an overview of the current status and prospects of trade flows as well as regulations in support of global sustainable development targets and the fight against climate change that are shaping them. It then goes on to examine state-of-the-art propulsion advancements, with a thorough analysis of internal combustion engine components and their optimized design depending on the alternative fuel that is being used. Technical discussions on various zero- or low-carbon fuels properties and combustion characterization are included alongside a description of the most effective emission after-treatment solutions. The volume is concluded with an examination of ship electrification and the steep technological hurdles the industry still faces.The comprehensive excursus offered by the highly expert, international group of authors behind the book ensures that instrumental knowledge is made available for readers both in academia and professional settings to accelerate the pace of the global energy transition and the decarbonization of the global economy.

  • Undersea Fiber Communication Systems

    • 3 Edición
    • José Chesnoy + 1 más
    • Inglés
    Undersea Fiber Communication Systems, Third edition is an authoritative guide exploring the comprehensive aspects of optical communication systems over submarine cables. Covering topics such as design, technology, installation, and maintenance, it serves as an essential resource for students, experts, operators, and investors alike. This updated edition reflects the significant advancements made in the field over the past decade, ensuring it remains indispensable in the rapidly evolving domain of submarine optical communications. The third edition addresses key developments including the transverse role of open cables, the evolution of coherent transponders, and the impacts of space division multiplexing (SDM).The book also explores advancements in wet plant equipment, environmental impacts of marine operations, contract management, and the progression of unrepeated systems to match repeated systems at network levels. This comprehensive update ensures the book's relevance and utility in a field marked by continuous innovation.

  • Water-Lubricated Journal Bearings

    Marine Applications, Design, and Operational Problems and Solutions
    • 1 Edición
    • Wojciech Litwin
    • Inglés
    Water-Lubricated Journal Bearings: Marine Applications, Design, and Operational Problems and Solutions provides cutting-edge design solutions, common problems and methods for avoiding them, and material selection considerations for the use of water-lubricated journal bearings in marine environments. These bearings have many advantages, including the absence of the potential for oil contamination. They are also sensitive, and their production processes can be challenging, but this book outlines techniques and concepts designed to overcome these challenges, emphasizing their role in durable and reliable propulsion systems in modern, safe, and environment-friendly shipping.Propeller shafts, water-lubricated stern tube bearings, problems frequently encountered with water-lubricated propeller shaft bearings and sliding bearings alongside solutions to these problems are all covered, as are the hydrodynamic properties of water-lubricated bearings, operation at low revolution speeds, high-speed bearings, hybrid bearings, and more. Foundational concepts of tribology related to friction, lubrication, wear, and fluid/solid and solid/solid interactions in ship stern tube and water-lubricated turbine machinery are also discussed.

  • Marine Rudders, Hydrofoils and Control Surfaces

    Principles, Data, Design and Applications
    • 2 Edición
    • Anthony F. Molland + 1 más
    • Inglés
    The course keeping and manoeuvring requirements for a ship are governed by international maritime law. In assessing and predicting the course keeping and manoeuvring capabilities of the ship, knowledge is required of the rudder forces necessary to keep a course or facilitate a manoeuvre. The second edition of Marine Rudders, Hydrofoils and Control Surfaces includes up-to-date data and rudder design techniques that enable the rudder forces to be estimated, together with any interactions due to the hull and propeller. The new edition describes the design and application of hydrofoils including shape adaptive design, and their applications including hydrofoil craft, yachts, and kite surfing hydrofoils. The professional will also face the need to design control surfaces for motion control, such as roll and pitch, for surface vessels and submersibles, and the book contains the necessary techniques and data to carry out these tasks.This book is for practicing naval architects and marine engineers, small craft designers, yacht designers, hydrodynamicists, undergraduate and postgraduate students of naval architecture, maritime engineering and ship science, and the broader engineering community involved in the development of marine craft that rely on the generation of ‘lift’ such as control engineers and aerodynamicists.

  • Pounder's Marine Diesel Engines and Gas Turbines

    • 10 Edición
    • Malcolm Latarche
    • Inglés
    Pounder’s Marine Diesel Engines and Gas Turbines, Tenth Edition, gives engineering cadets, marine engineers, ship operators and managers insights into currently available engines and auxiliary equipment and trends for the future. This new edition introduces new engine models that will be most commonly installed in ships over the next decade, as well as the latest legislation and pollutant emissions procedures. Since publication of the last edition in 2009, a number of emission control areas (ECAs) have been established by the International Maritime Organization (IMO) in which exhaust emissions are subject to even more stringent controls. In addition, there are now rules that affect new ships and their emission of CO2 measured as a product of cargo carried.

  • New Technologies for Emission Control in Marine Diesel Engines

    • 1 Edición
    • Masaaki Okubo + 1 más
    • Inglés
    New Technologies for Emission Control in Marine Diesel Engines provides a unique overview on marine diesel engines and aftertreatment technologies that is based on the authors’ extensive experience in research and development of emission control systems, especially plasma aftertreatment systems. The book covers new and updated technologies, such as combustion improvement and after treatment, SCR, the NOx reduction method, Ox scrubber, DPF, Electrostatic precipitator, Plasma PM decomposition, Plasma NOx reduction, and the Exhaust gas recirculation method. This comprehensive resource is ideal for marine engineers, engine manufacturers and consultants dealing with the development and implementation of aftertreatment systems in marine engines.

  • Ship and Mobile Offshore Unit Automation

    A Practical Guide
    • 1 Edición
    • Henryk Pepliński
    • Inglés
    Ship and Mobile Offshore Unit Automation: A Practical Guide: A Practical Guide gives engineers a much-needed reference on relevant standards and codes, along with practical case studies on how to use these standards on actual projects and plans. Packed with the critical procedures necessary for each phase of the project, the book also gives an outlook on trends of development for control and monitoring systems, including usage of artificial intelligence in software development and prospects for the use of autonomous vessels.Rounding out with a glossary and introductory chapter specific to the new marine engineer just starting, this book delivers a source of valuable information to help offshore engineers be better prepared to safely and efficiently design today’s offshore unit control systems.

  • Probability and Mechanics of Ship Collision and Grounding

    • 1 Edición
    • Shengming Zhang + 2 más
    • Inglés
    Probability and Mechanics of Ship Collision and Grounding provides simplified analytical procedures for ship collision and grounding assessments, including probabilistic methods, an estimation of the energy released during collisions, and a prediction of the extent of damage on involved structures. An additional chapter is dedicated to current finite element analysis techniques that are used for estimating structural damage during ship collisions. The book encapsulates reliable and fast analysis methods for collision and grounding assessment, presenting tactics that have been extensively validated with experimental and numerical results. In addition, all described analysis methods include realistic calculation examples to provide confidence in their use.

  • Geometry for Naval Architects

    • 1 Edición
    • Adrian Biran
    • Inglés
    Geometry for Naval Architects is the essential guide to the principles of naval geometry. Formerly fragmented throughout various sources, the topic is now presented in this comprehensive book that explains the history and specific applications of modern naval architecture mathematics and techniques, including numerous examples, applications and references to further enhance understanding. With a natural four-section organization (Traditional Methods, Differential Geometry, Computer Methods, and Applications in Naval Architecture), users will quickly progress from basic fundamentals to specific applications. Careful instruction and a wealth of practical applications spare readers the extensive searches once necessary to understand the mathematical background of naval architecture and help them understand the meanings and uses of discipline-specific computer programs.

  • Radar Propagation and Scattering in a Complex Maritime Environment

    Modeling and Simulation from MatLab
    • 1 Edición
    • Christophe Bourlier
    • Inglés
    Radar Propagation and Scattering in a Complex Maritime Environment addresses advanced numerical techniques used to significantly reduce the complexity and memory requirement for solving the linear system that results from the discretization of the boundary integral equations by the Method of Moments (MoM). Typically, the problem of the VHF wave scattering from an object above a rough sea surface in a ducting environment is investigated as is the HF radar propagation above the Earth in the presence of islands. Along with these topics, the book also covers rapid asymptotic theories, which are derived and compared with references methods based on the MoM.

  • Creativity and the Performing Artist

    Behind the Mask
    • 1 Edición
    • Paula Thomson + 1 más
    • Inglés
    Creativity and the Performing Artist: Behind the Mask synthesizes and integrates research in the field of creativity and the performing arts. Within the performing arts there are multiple specific domains of expertise, with domain-specific demands. This book examines the psychological nature of creativity in the performing arts. The book is organized into five sections. Section I discusses different forms of performing arts, the domains and talents of performers, and the experience of creativity within performing artists. Section II explores the neurobiology of physiology of creativity and flow. Section III covers the developmental trajectory of performing artists, including early attachment, parenting, play theories, personality, motivation, and training. Section IV examines emotional regulation and psychopathology in performing artists. Section V closes with issues of burnout, injury, and rehabilitation in performing artists.

  • Buckling and Ultimate Strength of Ship and Ship-like Floating Structures

    • 1 Edición
    • Tetsuya Yao + 1 más
    • Inglés
    Buckling and Ultimate Strength of Ship and Ship-like Floating Structures provides an integrated state-of-the-art evaluation of ship structure mechanics including buckling, plastic failure, ultimate strength, and ultimate bending moments. For the design of any industrial product, it is necessary to understand the fundamentals in the failure behavior of structures under extreme loads. Significant developments have been made in understanding the analysis method of plastic collapse and behavior and strength of structures accompanied by buckling. Written by two of the foremost experts in international ship design and ocean engineering, this book introduces fundamental theories and methods as well as new content on the behavior of buckling/plastic collapse that help explain analysis like the initial imperfections produced by welding and the ultimate strength of plates, double bottom structures of bulk carriers, and ship and FPSO hull girders in longitudinal bending. Rounding out with additional coverage on floating structures such as oil and gas platforms and LNG/FLNG structural characteristics, Buckling and Ultimate Strength of Ship and Ship-like Floating Structures is a must-have resource for naval architects and other marine engineering professionals seeking to gain an in-depth understanding of the technological developments in this area.

  • Commercial Ship Surveying

    On/Off Hire Condition Surveys and Bunker Surveys
    • 1 Edición
    • Harry Karanassos
    • Inglés
    Commercial Ship Surveying: On/Off Hire Condition Surveys and Bunker Surveys provides guidance on the complete survey process, what should be done to prepare, and what constitutes good practice, all completely detailed so that the process can be executed quickly and efficiently. In addition to the surveying process, the book describes supplementary topics, such as the vessels likely encountered, the gear and rigging involved, and the special techniques necessary. The book is well-researched, with plenty of practical examples and photographic references, explaining not only what is expected to happen during surveys, but also how marine surveyors and ships’ officers are expected to perform, if, and when, they become involved with this work. Dedicated to detail, this book ensures that the reader clearly understands each step of the surveying process.

  • Numerical Models for Submerged Breakwaters

    Coastal Hydrodynamics and Morphodynamics
    • 1 Edición
    • Amir Sharifahmadian
    • Inglés
    Numerical Models for Submerged Breakwaters: Coastal Hydrodynamics and Morphodynamics discusses the practice of submerged breakwaters, an increasingly popular tool used as a coastal defense system because of their amenity and aesthetics as compared to common emerged beach protection measures. The book is the perfect guide for experienced professionals who wish to keep abreast of the latest best practices or those who are entering the field and need a reference, explaining new and traditional numerical methodologies for designing submerged breakwaters and measuring their performance. In addition, the book provides case studies, examples, and practical methods for data selection and pre-processing, model setup, calibration, and analysis.

  • Marine Applications of Advanced Fibre-reinforced Composites

    • 1 Edición
    • Jasper Graham-Jones + 1 más
    • Inglés
    The marine environment presents significant challenges for materials due to the potential for corrosion by salt water, extreme pressures when deeply submerged and high stresses arising from variable weather. Well-designed fibre-reinforced composites can perform effectively in the marine environment and are lightweight alternatives to metal components and more durable than wood. Marine Applications of Advanced Fibre-Reinforced Composites examines the technology, application and environmental considerations in choosing a fibre-reinforced composite system for use in marine structures. This book is divided into two parts. The chapters in Part One explore the manufacture, mechanical behavior and structural performance of marine composites, and also look at the testing of these composites and end of life environmental considerations. The chapters in Part Two then investigate the applications of marine composites, specifically for renewable energy devices, offshore oil and gas applications, rigging and sails. Underwater repair of marine composites is also reviewed.

  • Marine Structural Design

    • 2 Edición
    • Yong Bai + 1 más
    • Inglés
    Marine Structural Design, Second Edition, is a wide-ranging, practical guide to marine structural analysis and design, describing in detail the application of modern structural engineering principles to marine and offshore structures. Organized in five parts, the book covers basic structural design principles, strength, fatigue and fracture, and reliability and risk assessment, providing all the knowledge needed for limit-state design and re-assessment of existing structures. Updates to this edition include new chapters on structural health monitoring and risk-based decision-making, arctic marine structural development, and the addition of new LNG ship topics, including composite materials and structures, uncertainty analysis, and green ship concepts.

  • Handbook of Coastal Disaster Mitigation for Engineers and Planners

    • 1 Edición
    • Miguel Esteban + 2 más
    • Inglés
    The world’s population is expected to increase to over 8 billion by 2020. About 60% of the total population of the world lives in coastal areas and 65% of the cities with a population of over 2.5 million are located in coastal areas. Written by an international panel of experts in the fields of engineering and risk management, The Handbook of Coastal Disasters Mitigation presents a coherent overview of 10 years of coastal disaster risk management and engineering, during which some of the most relevant events of recent time have taken place, including the Indian Ocean tsunami, hurricanes Katrina and Sandy in the United States or the 2011 Japanese tsunami.

  • Marine Systems Identification, Modeling and Control

    • 1 Edición
    • Tony Roskilly + 1 más
    • Inglés
    Marine Systems Identification, Modeling and Control is a concise, stand-alone resource covering the theory and practice of dynamic systems and control for marine engineering students and professionals. Developed from a distance learning CPD course on marine control taught by the authors, the book presents the essentials of the subject, including system representation and transfer, feedback control and closed loop stability. Simulation code and worked examples are provided for both Scilab and MATLAB, making it suitable for both those without access to expensive software and those using MATLAB in a professional setting. This title considers the key topics without superfluous detail and is illustrated with marine industry examples.

  • Marine Structural Design Calculations

    • 1 Edición
    • Mohamed A. El-Reedy
    • Inglés
    The perfect guide for veteran structural engineers or for engineers just entering the field of offshore design and construction, Marine Structural Design Calculations offers structural and geotechnical engineers a multitude of worked-out marine structural construction and design calculations. Each calculation is discussed in a concise, easy-to-understand manner that provides an authoritative guide for selecting the right formula and solving even the most difficult design calculation. Calculation methods for all areas of marine structural design and construction are presented and practical solutions are provided. Theories, principles, and practices are summarized. The concentration focuses on formula selection and problem solving. A “quick look up guide”, Marine Structural Design Calculations includes both fps and SI units and is divided into categories such as Project Management for Marine Structures; Marine Structures Loads and Strength; Marine Structure Platform Design; and Geotechnical Data and Pile Design. The calculations are based on industry code and standards like American Society of Civil Engineers and American Society of Mechanical Engineers, as well as institutions like the American Petroleum Institute and the US Coast Guard. Case studies and worked examples are included throughout the book.

  • Wave Mechanics and Wave Loads on Marine Structures

    • 1 Edición
    • Paolo Boccotti
    • Inglés
    Wave Mechanics and Wave Loads on Marine Structures provides a new perspective on the calculation of wave forces on ocean structures, unifying the deterministic and probabilistic approaches to wave theory and combining the methods used in field and experimental measurement.Presenti... his quasi-determinism (QD) theory and approach of using small-scale field experiments (SSFEs), author Paolo Boccotti simplifies the findings and techniques honed in his ground-breaking work to provide engineers and researchers with practical new methods of analysis. Including numerous worked examples and case studies, Wave Mechanics and Wave Loads on Marine Structures also discusses and provides useful FORTRAN programs, including a subroutine for calculating particle velocity and acceleration in wave groups, and programs for calculating wave loads on several kinds of structures.

  • Hybrid Ship Hulls

    Engineering Design Rationales
    • 1 Edición
    • Vladimir M. Shkolnikov
    • Inglés
    Hybrid Ship Hulls provides an overview of cutting-edge developments in hybrid composite-metal marine ship hulls, covering the critical differences in material processing and structural behavior that must be taken into account to maximise benefits and performance.Supporti... the design of effective hybrid hulls through proper consideration of the benefits and challenges inherent to heterogenic structures, the book covers specific details of quality control, manufacturing, mechanical and thermal stress, and other behavioral aspects that need to be treated differently when engineering hybrid ship hulls. With a particular focus on heavy-duty naval applications, the book includes guidance on the selection of composite part configurations, innovative design solutions, novel hybrid joining techniques, and serviceability characterization.

  • Introduction to Marine Engineering

    • 2 Edición
    • D A Taylor
    • Inglés
    Introduction to Marine Engineering explains the operation of all the ship's machinery, with emphasis on correct, safe operating procedures and practices at all times. Organized into 17 chapters, this book begins with an overall look at the ship. Subsequent chapters describe the various ship machineries, including diesel engines, steam turbines, boilers, feed systems, pumps, auxiliaries, deck machinery, hull equipment, shafting, propellers, steering gear, and electrical equipment. Other aspects of marine engineering, particularly, fuel oils, lubricating oils, refrigeration, air conditioning, ventilation, firefighting and safety, watchkeeping, and equipment operation, are also described. This book will be useful to anyone with an interest in ships' machinery or a professional involvement in the shipping business.

  • The ROV Manual

    A User Guide for Remotely Operated Vehicles
    • 2 Edición
    • Robert D Christ + 1 más
    • Inglés
    Written by two well-known experts in the field with input from a broad network of industry specialists, The ROV Manual, Second Edition provides a complete training and reference guide to the use of observation class ROVs for surveying, inspection, and research purposes. This new edition has been thoroughly revised and substantially expanded, with nine new chapters, increased coverage of mid-sized ROVs, and extensive information on subsystems and enabling technologies. Useful tips are included throughout to guide users in gaining the maximum benefit from ROV technology in deep water applications. Intended for marine and offshore engineers and technicians using ROVs, The ROV Manual, Second Edition is also suitable for use by ROV designers and project managers in client companies making use of ROV technology.

  • Ship Hydrostatics and Stability

    • 2 Edición
    • Adrian Biran + 1 más
    • Inglés
    Ship Hydrostatics and Stability is a complete guide to understanding ship hydrostatics in ship design and ship performance, taking you from first principles through basic and applied theory to contemporary mathematical techniques for hydrostatic modeling and analysis. Real life examples of the practical application of hydrostatics are used to explain the theory and calculations using MATLAB and Excel. The new edition of this established resource takes in recent developments in naval architecture, such as parametric roll, the effects of non-linear motions on stability and the influence of ship lines, along with new international stability regulations. Extensive reference to computational techniques is made throughout and downloadable MATLAB files accompany the book to support your own hydrostatic and stability calculations. The book also includes definitions and indexes in French, German, Italian and Spanish to make the material as accessible as possible for international readers.

  • Muckle's Naval Architecture

    • 2 Edición
    • W. Muckle + 1 más
    • Inglés
    Muckle's Naval Architecture, Second Edition is concerned with problems related to resistance, propulsion, and vibration in naval architecture. Topics include ship calculations, stability and trim, ship motions, and structural strength. This book also gives a brief reference to ship design. This text is comprised of 13 chapters; the first of which provides an overview of the function of the ship, its layout, and various types. The next chapter explains definitions, principal dimensions, and form coefficients, along with classification societies and governmental authorities that regulate ship design, construction, and safety. Various calculations that are performed to determine the form of a ship are the subject of the next chapter. Attention then turns to buoyancy, stability, and trim, along with sea and ship motions, the problem of structural strength, vibration, and resistance. The influence of rudders and control on ship movement is also discussed. Finally, this book describes the methods for determining the amount of power required to propel a ship. This book is intended primarily for practicing naval architects, marine engineers, deck officers, and all students of naval architecture.

  • Marine Boilers

    • 3 Edición
    • G. T. H. Flanagan
    • Inglés
    Marine Boilers, Third Edition provides practical information about boilers and other relevant equipment used at sea on steam and motor vessels. The coverage of the book includes auxiliary boilers, water tube boilers, and boiler mountings. The text also covers stresses in boiler shells; combustion of fuel in boilers; and boiler operation. The book will be of great use to marine engineers, mechanics, and technicians who primarily deals with marine-related machineries.

  • Introduction to Naval Architecture

    • 5 Edición
    • E. C. Tupper
    • Inglés
    Written by an award-winning naval architecture author and former vice-president of the Royal Institution of Naval Architects (RINA), the fifth edition of Introduction to Naval Architecture has been fully updated to take in advances in the field and is ideal both for those approaching the subject for the first time and those looking to update or refresh their knowledge on areas outside of their direct expertise. This book provides a broad appreciation of the science and art of naval architecture, explaining the subject in physical rather than in mathematical terms. While covering basic principles, such as hull geometry, propulsion, and stability, the book also addresses contemporary topics, such as computer aided design and computer aided manufacture (CAD/CAM). The new edition reflects the continuing developments in technology, changes in international regulations and recent research. Knowledge of the fundamentals of naval architecture is essential not only for newcomers to the field but also the wealth of non-naval architects working in the marine area, including marine engineers, marine surveyors and ship crews. This book provides the most well-known and trusted introduction to the topic, offering a clear and concise take on the basics of this broad field. Praise for previous edition "...a clear and concise introduction to the subject, giving a good grasp of the basics of naval architecture." — Maritime Journal "...my go-to book for understanding the general principles of naval architecture. The book is well-written and easy to understand." — Amazon.com reviewer

  • Marine Propellers and Propulsion

    • 3 Edición
    • John Carlton
    • Inglés
    Propulsion technology is a complex, multidisciplinary topic with design, construction, operational and research implications. Bringing together a wealth of disparate information from the field, Marine Propellers and Propulsion provides comprehensive and cutting edge coverage to equip marine engineers, naval architects and anyone involved in propulsion and hydrodynamics with the knowledge needed to do the job. Drawing on experience from a long and varied career in consultancy, research, design and technical investigation, author John Carlton breaks the subject into three main sections - hydrodynamic theory, materials and mechanical considerations, and design, operation and performance. Connecting essential theory to practical problems in design, analysis and operational efficiency, Marine Propellers and Propulsion is an invaluable resource, packed with hard-won insights, detailed specifications and data.

  • Ship Stability for Masters and Mates

    • 7 Edición
    • Bryan Barrass + 1 más
    • Inglés
    Ship Stability for Masters and Mates explores all aspects of ship stability and ship strength, squat, and interaction and trim, as well as materials stresses and forces. Organized into 56 chapters, the book looks at the relationship between ship stability and ship motion, with emphasis on group weights in a ship. It also explains how TPCs are calculated for a range of drafts extending beyond the light and loaded drafts, along with form coefficients, including the coefficient of fineness of the waterplane area.The book explains how to perform KB, BM, and KM calculations and make graphics on metacentric diagrams. It considers large-angle stability, the effect of beam and freeboard on stability, and hydrostatic curves and values for vessels that are initially on even keel. The reader is also introduced to free-surface effects of slack tanks with divisional bulkheads, how side winds affect ship stability, and the correlation between freeboard and stability curves. Other chapters focus on timber ship freeboard marks, procedures and calculations for drydocking and stability, and ship squat in open water and in confined channels. The book also includes extracts from the 1998 Merchant Shipping (Load Line) Regulations Number MSN 1752(M).This book is intended for students seeking to obtain Transport Certificates of Competency for Deck Officers and Engineering Officers and STCW equivalent International qualifications, as well as Chief Mates and Officers on Watch (Officers in Charge) on board merchant ships and other maritime personnel, port authorities, marine consultants, nautical study lecturers, and marine superintendents.

  • Ship Construction

    • 7 Edición
    • George J. Bruce + 1 más
    • Inglés
    Ship Construction, Seventh Edition, offers guidance for ship design and shipbuilding from start to finish. It provides an overview of current shipyard techniques, safety in shipyard practice, materials and strengths, welding and cutting, and ship structure, along with computer-aided design and manufacture, international regulations for ship types, new materials, and fabrication technologies. Comprised of seven sections divided into 32 chapters, the book introduces the reader to shipbuilding, including the basic design of a ship, ship dimensions and category, and development of ship types. It then turns to a discussion of rules and regulations governing ship strength and structural integrity, testing of materials used in ship construction, and welding practices and weld testing. Developments in the layout of a shipyard are also considered, along with development of the initial structural and arrangement design into information usable by production; the processes involved in the preparation and machining of a plate or section; and how a ship structure is assembled. A number of websites containing further information, drawings, and photographs, as well as regulations that apply to ships and their construction, are listed at the end of most chapters. This text is an invaluable resource for students of marine sciences and technology, practicing marine engineers and naval architects, and professionals from other disciplines ranging from law to insurance, accounting, and logistics.

  • A Guide to Ship Repair Estimates in Man-hours

    • 2 Edición
    • Don Butler
    • Inglés
    Expert ship surveyor Don Butler shares a lifetime’s ship repair costing experience in this unique resource for accurate cost estimation and planning Includes hard to come by information on typical ship repair labor expectations for accurate man-hour forecasting and cost estimation Produced for marine engineers and marine industry professionals to aid with repair specification and negotiation, helping you to plan work and budgets more reliably Uses man-hours as opposed to particular rates or currencies, providing a long-term model for pricing regardless of location, rate fluctuation or inflation Bringing together otherwise scattered details on specific repair and dry-docking activities, this invaluable guide will save you time and improve the accuracy of your ship repair estimates. Don’t plan or commission work without it! Don Butler is a fellow of the Institute of Marine Engineers and a member of Society of Consulting Marine Engineers and Ship Surveyors, UK.

  • Adhesives in Marine Engineering

    • 1 Edición
    • Jan R Weitzenböck
    • Inglés
    As a method of joining with economic, performance-related and environmental advantages over traditional welding in some applications, adhesive bonding of joints in the marine environment is increasingly gaining popularity. Adhesives in marine engineering provides an invaluable overview of the design and use of adhesively-bonded joints in this challenging environment.After an introduction to the use of adhesives in marine and offshore engineering, part one focuses on adhesive solution design and analysis. The process of selecting adhesives for marine environments is explored, followed by chapters discussing the specific design of adhesively-bonded joints for ship applications and wind turbines. Predicting the failure of bonded structural joints in marine engineering is also considered. Part two reviews testing the mechanical, thermal and chemical properties of adhesives for marine environments together with the moisture resistance and durability of adhesives for marine environments.With its distinguished editor and international team of expert contributors, Adhesives in marine engineering is an essential guide for all those involved in the design, production and maintenance of bonded structures in the marine environment, as well as proving a key source for academic researchers in the field.

  • A Guide to the Collision Avoidance Rules

    • 7 Edición
    • A. N. Cockcroft + 1 más
    • Inglés
    A Guide to the Collision Avoidance Rules is the essential reference to the safe operation of all vessels at sea. Published continuously since 1965, this respected and expert guide is the classic text for all who need to practically and legally understand and comply with ‘The Rules’. This seventh edition includes the full text of the International Regulations for Preventing Collisions at Sea, with practical discussion of the implications of the rules included alongside all updates seen over the years, including the most recent amendments which came into force in December 2007. The books sets out the ‘COLREGs’ with clear explanation of their meaning, and gives detailed examples of how the rules have been used in practice by seafarers, as well as excerpts from court judgments to illustrate how they have been interpreted in practice. Written for seagoing engineers, navigating officers, senior crew, cadets and those in training, plus ship operators, marine lawyers and anyone concerned with the safe operation of shipping, this is an essential reference at sea and on shore.

  • Pounder's Marine Diesel Engines and Gas Turbines

    • 9 Edición
    • Doug Woodyard
    • Inglés
    Since its first appearance in 1950, Pounder's Marine Diesel Engines has served seagoing engineers, students of the Certificates of Competency examinations and the marine engineering industry throughout the world. Each new edition has noted the changes in engine design and the influence of new technology and economic needs on the marine diesel engine. Now in its ninth edition, Pounder's retains the directness of approach and attention to essential detail that characterized its predecessors. There are new chapters on monitoring control and HiMSEN engines as well as information on developments in electronic-controlle... fuel injection. It is fully updated to cover new legislation including that on emissions and provides details on enhancing overall efficiency and cutting CO2 emissions. After experience as a seagoing engineer with the British India Steam Navigation Company, Doug Woodyard held editorial positions with the Institution of Mechanical Engineers and the Institute of Marine Engineers. He subsequently edited The Motor Ship journal for eight years before becoming a freelance editor specializing in shipping, shipbuilding and marine engineering. He is currently technical editor of Marine Propulsion and Auxiliary Machinery, a contributing editor to Speed at Sea, Shipping World and Shipbuilder and a technical press consultant to Rolls-Royce Commercial Marine.

  • The Maritime Engineering Reference Book

    A Guide to Ship Design, Construction and Operation
    • 1 Edición
    • Anthony F. Molland
    • Inglés
    The Maritime Engineering Reference Book is a one-stop source for engineers involved in marine engineering and naval architecture. In this essential reference, Anthony F. Molland has brought together the work of a number of the world's leading writers in the field to create an inclusive volume for a wide audience of marine engineers, naval architects and those involved in marine operations, insurance and other related fields. Coverage ranges from the basics to more advanced topics in ship design, construction and operation. All the key areas are covered, including ship flotation and stability, ship structures, propulsion, seakeeping and maneuvering. The marine environment and maritime safety are explored as well as new technologies, such as computer aided ship design and remotely operated vehicles (ROVs).Facts, figures and data from world-leading experts makes this an invaluable ready-reference for those involved in the field of maritime engineering.Professo... A.F. Molland, BSc, MSc, PhD, CEng, FRINA. is Emeritus Professor of Ship Design at the University of Southampton, UK. He has lectured ship design and operation for many years. He has carried out extensive research and published widely on ship design and various aspects of ship hydrodynamics.

  • The ROV Manual

    A User Guide for Observation Class Remotely Operated Vehicles
    • 1 Edición
    • Robert D Christ + 1 más
    • Inglés
    The ROV Manual: A User Guide for Observation-Class Remotely Operated Vehicles is the first manual to provide a basic ""How To"" for using small observation-class ROVs for surveying, inspection and research procedures. It serves as a user guide that offers complete training and information about ROV operations for technicians, underwater activities enthusiasts, and engineers working offshore. The book focuses on the observation-class ROV and underwater uses for industrial, recreational, commercial, and scientific studies. It provides information about marine robotics and navigation tools used to obtain mission results and data faster and more efficiently. This manual also covers two common denominators: the technology and its application. It introduces the basic technologies needed and their relationship to specific requirements; and it helps identify the equipment essential for a cost-effective and efficient operation. This user guide can be invaluable in marine research and surveying, crime investigations, harbor security, military and coast guarding, commercial boating, diving and fishing, nuclear energy and hydroelectric inspection, and ROV courses in marine and petroleum engineering.

  • Marine Propellers and Propulsion

    • 2 Edición
    • John Carlton
    • Inglés
    Although the propeller lies submerged out of sight, it is a complex component in both the hydrodynamic and structural sense. This book fulfils the need for a comprehensive and cutting edge volume that brings together a great range of knowledge on propulsion technology, a multi-disciplinary and international subject. The book comprises three main sections covering hydrodynamics; materials and mechanical considerations; and design, operation and performance. The discussion relates theory to practical problems of design, analysis and operational economy, and is supported by extensive design information, operational detail and tabulated data. Fully updated and revised to cover the latest advances in the field, the new edition now also includes four new chapters on azimuthing and podded propulsors, propeller-rudder interaction, high-speed propellers, and propeller-ice interaction.

  • Dynamic Aquaria

    Building Living Ecosystems
    • 3 Edición
    • Walter H. Adey + 1 más
    • Inglés
    In its third edition, this praised book demonstrates how the living systems modeling of aquatic ecosystems for ecological, biological and physiological research, and ecosystem restoration can produce answers to very complex ecological questions. Dynamic Aquaria further offers an understanding developed in 25 years of living ecosystem modeling and discusses how this knowledge has produced methods of efficiently solving many environmental problems. Public education through this methodology is the additional key to the broader ecosystem understanding necessary to allow human society to pass through the next evolutionary bottleneck of our species. Living systems modeling as a wide spectrum educational tool can provide a primary vehicle for that essential step. This third editon covers the many technological and biological developments in the eight plus years since the second edition, providing updated technological advice and describing many new example aquarium environments.

  • Ship Construction

    • 6 Edición
    • Keith W. Hutchinson
    • Inglés
    Ship Construction is a comprehensive text for students of naval architecture, ship building and construction, and for professional Naval Architects and Marine Engineers as a refresher on the latest developments in ship types, safety and shipyard practices. Beginning with an introduction to ship building and concluding with the finished product, the book enables the reader to follow the construction of a ship from start to finish. Eyres explores in depth, chapter by chapter, the development of ship types, materials and strengths of ships, welding and cutting, shipyard practice, ship structure and outfitting. The new edition includes a new chapter on computer-aided design and manufacture, and all the latest international regulations and technological developments.

  • Reservoir Engineering Handbook

    • 3 Edición
    • Tarek Ahmed
    • Inglés
    Reservoir engineering is the design and evaluation of field development and exploitation processes and programs. This topic encompasses the field of geology, drilling and completion, production engineering and reserves and evaluation.This book details essential information as well as insight and is a comprehensive up-to-date reference tool for the reservoir engineers, petroleum engineers and engineering students alike. Acting as a guide to predicting oil reservoir performance this edition analyses through the analysis of oil recovery mechanisms and performance calculations, and spells out the fundamentals of reservoir engineering and their application through a comprehensive field study. Several examples from a wide variety of applications demonstrate the performance of processes under forceful conditions. Key relationships among the different operating variables are also thoroughly described.

  • Ship Stability for Masters and Mates

    • 6 Edición
    • Bryan Barrass + 1 más
    • Inglés
    Understanding ship stability is critical for all maritime students or professionals who are studying for a deck or engineering certificate of competency, or seeking promotion to a higher rank within any branch of the merchant marine or Navy. The sixth edition of the now classic 'Ship Stability' provides a comprehensive introduction to all aspects of ship stability and ship strength, squat, interaction and trim, materials stresses and forces.

  • Radar and ARPA Manual

    Radar and Target Tracking for Professional Mariners, Yachtsmen and Users of Marine Radar
    • 2 Edición
    • Alan G. Bole + 3 más
    • Inglés
    Radar and ARPA (Automatic Radar Plotting Aids) are standard systems on all commercial vessels and are widely used in the leisure maritime sector. This fully revised new edition covers the complete radar/ARPA installation, including AIS (Automatic Identification System) and ECDIS (Electronic Chart Display & Information Systems). It serves as the most comprehensive and up-to-date reference on equipment and techniques for radar observers using older and newer systems alike. Suitable for use both as a professional user's reference and as a training text, it covers all aspects of radar and ARPA technology, its use and its role in shipboard operations. Reference is made throughout to IMO (International Maritime Organisation) Performance Standards, the role of radar in navigation and in collision avoidance, and to international professional and amateur marine operations qualifications.

  • Introduction to Naval Architecture

    Formerly Muckle's Naval Architecture for Marine Engineers
    • 4 Edición
    • E. C. Tupper
    • Inglés
    The fundamental characteristics of a ship’s design, and how they affect its behaviour at sea are of crucial importance to many people involved in the design, construction, operation, and maintenance of all marine vessels. Naval architects and those working in ship design need to understand these principles in depth. Marine engineers must likewise recognise the degree to which their activities are influenced and bounded by these principles. Finally, senior crew – both Ship’s Engineers and Commanders – need an understanding of the principles of naval architecture in order to properly fulfil their duties. This book offers a clear and concise introduction to the subject and is of great value to both students and practising professionals in all of the above fields.

  • Ship Design and Performance for Masters and Mates

    • 1 Edición
    • Bryan Barrass
    • Inglés
    Ship Design and Performance for Masters and Mates is a quick to use, comprehensive reference that brings the key information needed to understand ship design and performance at your fingertips. The book covers all key aspects of ship design and performance, supplemented by exam revision one-liners. It does not assume detailed theoretical knowledge, but rather builds up the reader's understanding of how the elements of ship design influence and impact on its performance, and how the engineer, crew and operators can maximise the performance of their vessel in operation. Written by an experienced marine engineering consultant, author and lecturer, this book presents key facts and formulas, backed up throughout by relevant theory, illustrations and photographs. It includes examples of modern ship-types and their general particulars and covers topics ranging from design and power coefficients to types of ship resistance; types of ship speed; types of power on ships; designing a ship's propeller; details of maximum ship squats; the phenomena of interaction of ships in confined waters; mechanisms for improving ship handling; and improvements in power output. This book is an essential introduction and reference for students and those newly at sea, as well as for anyone involved with ship design, marine engineering, naval architecture, and the day-to-day operation of ships in port.

  • Pounder's Marine Diesel Engines

    and Gas Turbines
    • 8 Edición
    • Doug Woodyard
    • Inglés
    Since its first appearance in 1950, Pounder's Marine Diesel Engines has served seagoing engineers, students of the Certificates of Competency examinations and the marine engineering industry throughout the world. Each new edition has noted the changes in engine design and the influence of new technology and economic needs on the marine diesel engine.This eighth edition retains the directness of approach and attention to essential detail that characterized its predecessors. There are new chapters on monitoring control systems and governor systems, gas turbines and safety aspects of engine operation. Important developments such as the latest diesel-electric LNG carriers that will soon be in operation.After experience as a seagoing engineer with the British India Steam Navigation Company, Doug Woodyard held editorial positions with the Institution of Mechanical Engineers and the Institute of Marine Engineers. He subsequently edited The Motor Ship journal for eight years before becoming a freelance editor specializing in shipping, shipbuilding and marine engineering. He is currently technical editor of Seatrade, a contributing editor to Speed at Sea, Shipping World and Shipbuilder and a technical press consultant to Rolls-Royce Commercial Marine.

  • Guide to the Collision Avoidance Rules

    • 6 Edición
    • A. N. Cockcroft + 1 más
    • Inglés
    A Guide to the Collision Avoidance Rules is the essential reference to the safe operation of all vessels at sea. Published continuously since 1965, this respected and expert guide is the classic text for all who need to, practically and legally, understand and comply with the Rules. This sixth edition incorporates all of the amendments to the International Regulations for Preventing Collisions at Sea which came into force in November 2003.The books sets out all of the Rules with clear explanation of their meaning, and gives detailed examples of how the rules have been used in practice by seafarers, as well as excerpts from Court judgements to illustrate how they have been interpreted in practice.Written for masters, navigating officers, senior crew, cadets and those in training, plus ship operators, marine lawyers and anyone concerned with the safe operation of shipping, this is an essential reference for at sea and on shore.

  • Ship Hydrostatics and Stability

    • 1 Edición
    • Adrian Biran
    • Inglés
    The hydrostatic approach to ship stability aims to balance idealized ship weight against buoyancy forces. This textbook is a complete guide to understanding ship hydrostatics in ship design and ship performance. Adrian Biran guides readers from first principles through basic and applied hydrostatic and ship stability theory, and introduces contemporary mathematical techniques for hydrostatic modelling and analysis. Real life examples of the practical application of hydrostatics are used to explain the theory and calculations; and to illustrate the effect shifting weights and central gravity displacements have on overall ship stability. Ship Hydrostatics and Stability covers recent developments in the field of naval architecture such as parametric resonance (also known as the Mathieu effect), the effects of non-linear motions on stability, the influence of ship lines, and new international stability regulations for small vessels. Extensive use of computer techniques is made throughout.

  • Technology and Safety of Marine Systems

    • 1 Edición
    • Volumen 7
    • J. Wang
    • Alan Pillay
    • Inglés
    Traditionally society has regulated hazardous industries by detailed references to engineering codes, standards and hardware requirements. These days a risk-based approach is adopted. Risk analysis involves identifying hazards, categorizing the risks, and providing the necessary decision support to determine the necessary arrangements and measures to reach a "safe" yet economical operating level. When adopting such an approach the abundance of techniques available to express risk levels can often prove confusing and inadequate. This highly practical guide to safety and risk analysis in Marine Systems not only adds to the current techniques available, but more importantly identifies instances where traditional techniques fall short. Uncertainties that manifest within risk analysis are highlighted and alternative solutions presented. In addition to risk analysis techniques this book addresses influencing elements including: reliability, Maintenance Decision making and Human error. The highly practical approach of this title ensures it is accessible to the widest possible audience

  • Basic Ship Theory Volume 2

    • 5 Edición
    • E. C. Tupper + 1 más
    • Inglés
    Rawson and Tupper's Basic Ship Theory, first published in 1968, is widely known as the standard introductory text for naval architecture students, as well as being a useful reference for the more experienced designer. The fifth edition continues to provide a balance between theory and practice. Volume 2 expands on the material in Volume 1, covering the dynamics behaviour of marine vehicles, hydrodynamics, manoeuvrability and seakeeping. It concludes with some case studies of particular ship types and a discussion of maritime design. Both volumes feature the importance of considering the environment in design. Basic Ship Theory is an essential tool for undergraduates and national vocational students of naval architecture, maritime studies, ocean and offshore engineering, and will be of great assistance to practising marine engineers and naval architects.