Saltar al contenido principal
Elsevier

Libros en Ingeniería de Materiales

  • Ternary Hybrid Nanofluids

    Principles and Applications
    • 1 Edición
    • Ali Ijam + 2 más
    • Inglés
    Ternary Hybrid Nanofluids: Principles and Applications offers a groundbreaking exploration of the properties, preparation techniques, and diverse applications of ternary hybrid nanofluids in heat transfer. This comprehensive reference encompasses various physical and chemical properties, including thermophysical characteristics and heat transfer behaviors, along with detailed mathematical models and correlations. From an in-depth analysis of preparation techniques to discussions on future research challenges and opportunities, this book serves as an invaluable resource for advanced students, researchers and engineers seeking a profound understanding of ternary hybrid nanofluids.Ternary Hybrid Nanofluids: Principles and Applications covers essential topics for researchers and practitioners in the field. Chapters include an introduction to ternary hybrid nanofluids, discussions on formation and stability, exploration of thermal, electrical, and optical properties, analysis of rheological behavior, applications in solar thermal and convective heat transfer systems, utilization in heat pipes and thermosyphons, and development insights on limitations and opportunities for ternary nanofluids. Additionally, the book addresses the utilization of cutting fluid doped with nanoparticles for machining processes, providing comprehensive insights into the synthesis, properties, and applications of ternary hybrid nanofluids.Ternary Hybrid Nanofluids: Principles and Applications offers benefits to professionals and academics in various fields, including material scientists, mechanical and chemical engineers, physicists, and researchers specializing in nanofluids. Students, experienced researchers and industry professionals seeking to enhance their understanding of heat transfer and nanotechnology will find this book to be a valuable reference.

  • Deformation Processing of High Entropy Alloys

    • 1 Edición
    • Bharat Gwalani + 1 más
    • Inglés
    Deformation Processing of High Entropy Alloys offers an in-depth exploration of the mechanical properties and processing methods of high entropy alloys (HEAs), covering topics such as microstructural evolution, deformation mechanisms, alloy composition, processing techniques, and various applications. The book provides an introduction to HEAs, outlining their differences from more traditional alloys before diving into more complex subjects such as their stability and metastability, their crystal structures, FCC- and BCC-based HEAs, as well as thermomechanical treatments and their mechanical properties. Deformation processing techniques, solid state processing methods, and additive manufacturing of HEAs are each discussed as well, as are modeling and simulation approaches. Finally, a broad range of applications and limitations for these cutting-edge materials are also covered.

  • Damage Mechanics for Laminated Composites

    • 1 Edición
    • Shuguang Li
    • Inglés
    Damage Mechanics for Laminated Composites outlines commonly encountered damage mechanisms and failure modes in laminated composites and provides strategies for avoiding them. The book primarily analyzes two types of damage commonly observed in laminated composites, transverse matrix cracking and delamination, and is divided into 3 sections, the first providing an introduction to the topic, covering the stress-strain relationship, thermodynamics, material categorization, common experimental observations, laminate theory, and the generalized plan strain problem. The second section discusses transverse matrix cracking, including subjects such as cracked laminate analysis, Hashin’s analysis, shear lag, the ply-discount technique, continuum damage mechanics, and the effects of viscosity. The third section analyzes delamination, including energy release rates, delamination modeling, and Abaqus models, and the book concludes with a discussion of progressive failure analyses and future developments.

  • Textile Surface Engineering

    Techniques, Applications, and Future Directions
    • 1 Edición
    • Robert Mather
    • Inglés
    Textile Surface Engineering: Techniques, Applications, and Future Directions highlights the wide range of approaches available for modifying textile surfaces while also considering textile surface modification strategies for a variety of textile applications and discussing the actual practical benefits arising from these strategies. The book concludes with outline discussions of emerging trends and potential future developments in the field of surface modified textiles. Readers will find this to be an updated critique of the practical benefits of textile surface modifications and the improvements that they can bestow on textile products.Textiles possess an enormous range of diverse applications. The diversity of these applications requires an astonishing range of textile properties, and it is widely recognized that the structure and geometry of textile fibers and the types of fabric constructed from them are key factors. Important additional factors, however, are the nature of the fiber surface and the nature of the surface of the constructed fabric. These surfaces can often be modified to provide much improved performance in the application for which the fabric is intended.

  • Digital Light Processing and Stereolithography Additive Manufacturing

    Fundamentals, Applications, and Trends
    • 1 Edición
    • Ignazio Roppolo
    • Inglés
    Digital Light Processing and Stereolithography Additive Manufacturing: Fundamentals, Applications, and Trends overviews these cutting-edge 3D-printing techniques, the materials they can produce, and applications for these techniques and materials. Sections cover the fundamentals, with chapters discussing the core principles of vat photopolymerization, related technological requirements, the characteristics of digital light processing (DLP) and stereolithography (SL) compared to other light-induced methods, as well as the chemistry and materials used, including how to formulate a resin. Section two covers applications, such as design for structural applications, as well as DLP and SL use in dentistry, soft robotics, sensors, biomedicine, microfluidics, catalysis and chemical engineering, and more.The book concludes with a section discussing current trends and future directions for the technology, with chapters analyzing sustainable materials, including efforts to substitute synthetic materials with bio-based ones, vitrimers, controlled polymers, and 4D printing and DLP and SL in hybrid AM.

  • Cementitious Matrices for Low- and Intermediate-Level Radioactive Waste Immobilization

    • 1 Edición
    • Pavlo Kryvenko + 2 más
    • Inglés
    Cementitious Matrices for Low- and Intermediate-Level Radioactive Waste Immobilization reports research progress in this context, reviewing both traditional solidification methodologies and state-of-the-art developments in cementation technologies that promise to fulfill safety functions more dependably and ensure closer compliance with environmentally conscious practices and regulations. The book begins by classifying and characterizing radioactive wastes and explaining the chemistry of cementitious matrices, facilitating the choice of solidification agents and processing equipment. It offers guidelines for the selection of bonding materials, such as hydraulic cement or polymers, and discusses several admixtures and adsorbents to enhance embedding, binder properties, and contaminant stabilization.The book also includes statistical techniques for generating response surface models for large, complicated applications and case studies that collate the international authoring team’s firsthand insights into optimized handling of immobilized waste forms.

  • Mechanics, Additive Manufacturing, and Applications of High-Entropy Alloys

    • 1 Edición
    • Muhammad Abubaker Khan + 4 más
    • Inglés
    Mechanics, Additive Manufacturing, and Applications of High-Entropy Alloys provides key insight into the mechanics, additive manufacturing, and application of high entropy alloys (HEAs). The book starts with chapters covering the dynamic mechanical and impact properties of these materials, theoretical models for strengthening HEAs and understanding various modes of failure, their low- and high-velocity impact behaviors, the design of lightweight HEAs, and much more. The book also features chapters outlining additive manufacturing techniques of HEAs, the effect of microstructures on their mechanical properties, and deformation mechanisms. The book concludes with chapters discussing the applications of HEAs, such as in lattice structures, high-energy absorption, nuclear energy, aerospace materials, as well as their recycling and sustainability.

  • Safety and Sustainability of Hazardous Materials in Civil Engineering

    • 1 Edición
    • Ali Akbar Firoozi + 1 más
    • Inglés
    Safety and Sustainability of Hazardous Materials in Civil Engineering addresses the complex challenges posed by toxic substances and harmful waste generated during construction projects, creating a cohesive framework for a better understanding of the multidisciplinary interrelationships among sustainable development, human health, and the environment. The volume thoroughly reviews methodologies for identifying and classifying hazardous materials; systematic processes for their handling, storage, transportation, and disposal; innovative risk detection and monitoring techniques; remediation and emergency preparedness measures; and standards and best practices from different regions across the world.By combining scientific research with practical applications and emphasizing critical, coordinated approaches to unify safety, reliability, environmental responsibility, and regulatory compliance, the book is an indispensable reference resource for a variety of readers in both academia and industry.

  • Cellulose in 3D and 4D Printing

    Additive Manufacturing for Sustainable Processing and Applications
    • 1 Edición
    • Chaudhery Mustansar Hussain
    • Inglés
    Cellulose in 3D and 4D Printing: Additive Manufacturing for Sustainable Processing and Applications addresses the growing need for sustainable materials in the manufacturing industry. The book covers the integration of cellulose into 3D and 4D printing technologies, providing properties, processing methods, and potential applications, and bridging the gap between material science and advanced manufacturing. The book starts with a section covering the fundamentals of using cellulose in additive manufacturing, with chapters discussing cellulose extraction and purification methods, the mechanical and rheological behaviors of cellulose, and the use of recycled cellulose in 3D and 4D printing.Following sections cover processing and printing technologies, including the processing of cellulose-based filaments and resins, as well as the use of multi-material cellulose and hybrid cellulose in additive manufacturing. Design optimization, simulation, and modeling of 3D and 4D printing with cellulose is also outlined, as are applications in aerospace, biomedicine, electronics, and food science. Case studies and a brief section on commercialization, scale-up strategies, environmental impacts, and more round out the content.

  • Digital Technologies in Metal Casting

    Data Analytics, Simulation, Industry 4.0, and Artificial Intelligence
    • 1 Edición
    • Amit Sata + 2 más
    • Inglés
    Digital Technologies in Metal Casting: Data Analytics, Simulation, Industry 4.0, and Artificial Intelligence focuses on integrating cutting-edge technology with metal casting, outlining simulation methods, data analytics, artificial intelligence, and other interactive and immersive technologies. The book starts with overviews of both metal casting and the technologies to be integrated before moving into chapters on the specific integration of those technologies into the metal casting process. The utilization of simulation, data analytics, artificial intelligence, cyber manufacturing, and more are highlighted, with each chapter covering specific use cases, commonly encountered challenges, and solutions for overcoming those challenges.

  • Design for Additive Manufacturing Fundamentals

    Principles, Techniques, and Design Strategies
    • 1 Edición
    • Mehrshad Mehrpouya + 2 más
    • Inglés
    Design for Additive Manufacturing Fundamentals: Principles, Techniques, and Design Strategies outlines design approaches, techniques, and principles for the optimal additive manufacturing of metals and polymers. Sections cover the concept of design optimization for additive manufacturing (DoAM), outlining the primary steps in the additive manufacturing (AM) workflow and emphasizing the pivotal role DoAM plays in both the design and manufacturing processes. Opportunities and constraints are discussed, as are the different AM techniques available with pros and cons each weighed. Subsequent chapters cover specific design strategies, simulation for AM production processes, generative design approaches for AM structures, and topology optimization techniques.It concludes with chapters focused on strategies and design approaches for lattices and porous structures, design for post-processing in AM, and finally a chapter on the future of DoAM.

  • Fused Filament Fabrication 3D Printing

    Processes and Applications
    • 1 Edición
    • Rezgar Hasanzadeh
    • Inglés
    Fused Filament Fabrication 3D Printing: Processes and Applications overviews fused filament fabrication additive manufacturing, highlighting the advantages, limitations, and unique strengths of this 3D printing method. Key process parameters essential for effective slicing and printing of 3D objects are covered, including methods for optimizing these parameters, particularly when working with composite filaments. The mechanical properties of printed parts, with an emphasis on tensile and impact strength performance are discussed, as are design considerations, strategies to mitigate the key limitations of the technique, and analysis of how various FFF process parameters affect the mechanical and morphological properties of the printed parts.Case studies and applications are also included, highlighting the use of FFF technology in biomedicine and tissue engineering, shape memory polymers, acoustic insulation, and auxetic structures with tailored mechanical responses.

  • Metal Plasticity

    Experimental Characterization and Constitutive Modeling
    • 1 Edición
    • Yanshan Lou
    • Inglés
    Metal Plasticity: Experimental Characterization and Constitutive Modeling outlines the fundamentals of plastic deformation of metals, related constitutive modeling techniques, and how best to apply these modeling techniques. The book summarizes the plastic behaviors of metals based on experimental observations while also reviewing related constitutive models used to determine their plastic deformation, including isotropic yield functions, anisotropic yield functions, asymmetric yield functions, anisotropic hardening yield functions, and more. It demonstrates the yield surfaces of functions under 2D plane stress, 3D plane stress with shear stress effect, and 3D triaxial loading, amongst others.The development of different plasticity models, including their form, parameters, calibration, accuracy, advantages, and disadvantages are outlined as well, and the book also summarizes and compares various models, emphasizing their costs and user-friendliness, thus allowing readers to select the model that best meets their needs.

  • Additively Manufactured Engineering and Structural Materials with High Mechanical Performance

    • 1 Edición
    • Laichang Zhang + 1 más
    • Inglés
    Additively Manufactured Engineering and Structural Materials with High Mechanical Performance presents state-of-the-art research advances and applications of high-performance materials and structures manufactured by different 3D printing methods. It covers the design, manufacturing, mechanical properties, post-processing, and applications of various engineering materials, including a broad array of metals and alloys, ceramics, polymers, and composites, examining their microstructures and what determines their optimal mechanical performance. Cutting-edge topics such as artificial intelligence-assiste... quality control, machine learning-assisted performance evaluation, and 4D printing are each discussed. Multi-material additive manufacturing, the thermomechanics of additive manufacturing, and metal powder recycling are also covered, and the book also provides insight into potential applications of these materials through illustrative case studies from the automotive, construction, and bioengineering industries.

  • Sustainable Plant-Based Natural Fibres in Textiles

    • 1 Edición
    • Sheraz Ahmad + 3 más
    • Inglés
    Sustainable Plant‑based Natural Fibres in Textiles provides a focused and up‑to‑date overview of renewable, biodegradable fibre alternatives and their increasing importance in modern textile science and manufacturing. Addressing the growing demand for environmentally responsible materials, the book explores plant‑based natural fibres in terms of their structure, properties, processing methods, and performance, offering readers a clear understanding of their potential as sustainable textile solutions.Through applied examples and discussion of implementation strategies, it supports individuals, professionals, researchers, students and industry practitioners in evaluating and adopting plant‑based fibres as part of a broader transition toward more sustainable textile systems.

  • Superalloys

    Strengthening Behavior of Precipitating Phases
    • 1 Edición
    • Jung Bahadur Singh
    • Inglés
    Superalloys: Strengthening Behavior of Precipitating Phases covers the strengthening mechanisms associated with all types of precipitates that form in superalloys, synthesizing a vast body of literature on the strengthening behavior of these phases, with each chapter introducing fundamental metallurgical principles to help readers develop a clear understanding. The book provides an in-depth exploration of the deformation mechanisms of intermetallic phases in superalloys, focusing on the interaction between matrix dislocations and these phases. Chapter 1 provides an overview of superalloys, their classifications, compositions, and the various strengthening phases, also covering the reasons behind the varying strengthening behavior of different precipitates.Chapter 2 lays the foundation for understanding deformation and strengthening mechanisms in metals and alloys. Chapters 3, 4, and 5 each focus on strengthening behavior and mechanisms of specific precipitates, γ′, γ″, and Ni2(Cr,Mo), respectively. Chapter 6 discusses the strengthening effects of the δ and η phases, which form at intermediate temperatures and play a crucial role in controlling grain size, enhancing creep, and fatigue resistance. Chapter 7 examines the role of other strengthening agents, including oxides, borides, and carbides that improve high-temperature strength by impeding dislocation motion and grain boundary sliding.

  • Ultrasonic Shot Peening

    Fundamentals and Applications
    • 1 Edición
    • Fei Yin
    • Inglés
    Ultrasonic Shot Peening: Fundamentals and Applications covers the fundamentals of this process, describing its mechanisms, numerical modeling of ultrasonic shot peening (USP), and experimental approaches to surface morphology evaluation during USP. Following sections discuss the fabrication of gradient nanostructured surfaces by USP, including surface nanocrystallization of stainless steel, high entropy alloys, titanium alloys, low-carbon steel, and copper. In addition, this section investigates the enhanced mechanical behaviors USP can provide in gradient nanostructured materials, such as improved strength-ductility, wear resistance, corrosion resistance, and fatigue resistance.The final section of the book outlines applications of USP and in-situ methods of producing nanograined metallic flakes and powders. A companion website with downloadable code and video clips is also included.

  • Special Techniques of Natural Dyeing using Mordants and Modifiers

    • 1 Edición
    • Padma Shree Vankar + 1 más
    • Inglés
    Special Techniques of Natural Dyeing using Mordants and Modifiers explores the development of special auxiliaries that enhance the colorfastness, color depth, and sustainability of naturally dyed fabrics that maintain low carbon footprints. Key topics include chapters on mordants, bio-mordants, transitional metal salts, and rare earth salts. Additionally, the book covers various modifiers and auxiliaries designed to improve color adherence, as well as a chapter dedicated to post-mordanting treatments with amino compounds. Natural dye enthusiasts will gain valuable insights into using mordants sustainably, achieving vibrant, long-lasting colors from common flowers and other local vegetative materials.

  • Thermal Stability and Oxidation Kinetics of MAX Phases

    • 1 Edición
    • It Meng Low
    • Inglés
    Thermal Stability and Oxidation Kinetics of MAX Phases provides techniques for improving the thermal stability of MAX phases, enabling their enhanced performance in extreme environments. The book provides a general overview of the physical and mechanical properties of MAX phases, including techniques for their synthesis and characterization. Oxidation characteristics, thermal stability, and decomposition kinetics are then covered for many individual MAX phases, including titanium silicon carbide, titanium aluminum carbide, titanium aluminum nitride, chromium aluminum carbide, and many more. In addition, their mechanical behaviors in vacuum settings and argon gas environments, in particular, are covered at length, and the application of these materials in aerospace, nuclear, and other settings is also discussed.

  • Engineering of Point Defects in Solids

    A Thermodynamic Approach to the Physics of Semiconductors
    • 1 Edición
    • Sergey V. Bulyarskiy
    • Inglés
    Engineering of Point Defects in Solids: A Thermodynamic Approach to the Physics of Semiconductors covers the theoretical and experimental thermodynamics and kinetics of defect formations in solids, including the formation of complex defects from simple ones. The book describes point defects (vacancies, antistructural, interstitial atoms, and impurities) while also providing algorithms for calculating their defect concentrations, conductivity, and stoichiometric composition. Doping of a substance with impurities, with a focus on germanium and silicon (as common semiconductors), is covered, including retrograde solubility, polytrophy, the solubility of impurities, and the mutual influence of donor and acceptor impurities. The thermodynamics of complex defects formed with the participation of vacancies (divacancies and complexes) are discussed, as is luminescence as a non-destructive method for monitoring the dynamics of changes in the concentration of defects in certain technological processes, with particular attention paid to the phenomenon of electron-photon interaction. Other topics covered include the optical properties of various complexes, compounds with volatile components, analyzing the kinetics of precipitate and nanocrystal formation, and more.

  • Additive Manufacturing of Architected Metamaterials

    Design, Properties, and Applications
    • 1 Edición
    • Matteo Benedetti + 2 más
    • Inglés
    Additive Manufacturing of Architected Metamaterials: Design, Properties, and Applications provides readers with a deep understanding of the design, manufacturing, properties, and applications of these materials. Chapters cover modeling and numerical techniques, experimental approaches for investigating mechanical properties, as well as the thermal, electromagnetic, and corrosion fatigue properties of these materials. Design techniques, microstructure, and topology are each discussed as well. Materials covered include additive manufactured lattice structures, cellular lattice materials, acoustic and elastic locally resonant metamaterials, rationally designed cellular metamaterials, optical metamaterials, biological metamaterials, high strength strut-based lattices, and more.The book concludes with a chapter focused on data-driven design and artificial intelligence for architected metamaterials.

  • Materials Informatics

    Molecules, Crystals, and Beyond
    • 1 Edición
    • Krishna Rajan
    • Inglés
    Materials Informatics: Molecules, Crystals and Beyond discusses the role of information science in aiding the discovery and interpretation of multiscale relationships that are critical for materials discovery, design, and optimization. The book covers key challenges in applying information science methods to materials science, including the multidimensional nature of structure-property relationships, data sparsity, and the nature and sources of uncertainty, along with a brief overview of the algorithmic tools used for unsupervised and supervised learning.Building on these topics, chapters then cover the development of physics/chemistry informed data representations of structure and properties, the application of machine learning for structure and property prediction and screening for targeted properties, and the utilization of techniques such a graphics recognition, natural language processing, and statistically driven visualization tools in deciphering processing-structure... relationships in materials.

  • Fundamentals of Laser-Based Powder Bed Fusion of Polymers

    • 1 Edición
    • Eujin Pei + 3 más
    • Inglés
    Fundamentals of Laser-Based Powder Bed Fusion of Polymers addresses the design principles, materials, process monitoring, powder characteristics, microstructure, mechanical properties, post-processing, nondestructive testing, and more of polymers produced by laser-based powder bed fusion (LBPBF) additive manufacturing. Industrial applications and case studies are included throughout, as is insight on the testing, certification, and qualification of parts. The book starts with a section covering the fundamentals of the process and the materials used, with the second section discussing design for LBPBF of polymers including guidance on data management, process chains, and software and tools used. The third section provides insight on raw materials and feedstock, looking at how polymeric materials are selected, designed, and modified for use. Material characterization and powder management workflow are also covered. The fourth section of the book looks at the production process, including post-processing, process monitoring, prototyping vs. serialized production, and qualified production considerations. The book concludes with a section on part quality considerations, discussing measurement, industry certification and qualification, and more.

  • Functional Nanotextiles

    Processing, Properties, and Applications
    • 1 Edición
    • Shakeel Ahmed + 2 más
    • Inglés
    Functional Nanotextiles: Processing, Properties, and Applications targets the underlying principles, state-of-the-art processing techniques, unique properties, and myriad applications of nanotextiles. Beyond the technical and academic facets, the book highlights the broader implications of nanotextiles, such as their environmental impacts, ethical considerations, and potential to reshape industries. In an era where sustainability, technological advancements, and multifunctionality are paramount, understanding functionalized nanotextiles becomes crucial. This book not only charts the current landscape but also speculates on the future trajectory of the field, making it a timely and essential resource.For stakeholders ranging from academic researchers to industry leaders, the book offers both a deep dive into specifics and a panoramic view of the broader ecosystem, ensuring its relevance in shaping the future of textiles, wearable technologies, and beyond.

  • Additive Manufacturing of Polymeric Materials for Energy Storage Applications

    • 1 Edición
    • API Popoola + 3 más
    • Inglés
    Additive Manufacturing of Polymeric Materials for Energy Storage Applications synthesizes cutting-edge and developing research on additive manufacturing of polymeric materials for energy storage, covering the most recent developments in materials development, design optimization, process optimization, and characterization techniques. The book discusses how additive manufactured polymeric materials can be used for fuel cell components, batteries, supercapacitors, wind and solar energy storage, photovoltaic materials, and other energy-related applications. Fabrication techniques, design optimization methods, modeling approaches, and the mechanics of these materials are each covered in depth.

  • Databook of Flame Retardants

    • 2 Edición
    • Anna Wypych + 1 más
    • Inglés
    Databook of Flame Retardants contains information on commonly-used additives broken out into five sections, including General, Physical, Health and Safety, Ecological, and Use. Over one hundred types of data are included for over three hundred and fifty commercial-based products. All data fields are defined and include a broad range of information, such as calcium contents, molecular mass, brightness, freezing/melting points, viscosity, volatility, UN/NA class, autoignition temperature, partition coefficient, processing methods, concentrations used, and more. This book is best utilized in tandem with the Handbook of Flame Retardants. Each book complements the other without repeating information, with the other release explaining the role of these products, their selection, mechanism of action, use in different polymers and products, and health and commercial issues related to flame retardants.

  • Handbook of Microplastics

    • 1 Edición
    • George Wypych
    • Inglés
    Handbook of Microplastics provides a wealth of information on what these materials are, how they are proliferating, their geographical distribution, chemical components, morphology, and their physical characteristics, including the various forms they take in different environments. The mechanisms of microplastic formation are discussed, as are methods for detecting and analyzing them, with emphasis placed on the importance of accurate identification in assessing their impact. Key commercial products that are significant sources of microplastics are identified, raising awareness about consumer choices and their environmental consequences. The formation, properties, and hazards of microplastics from various polymers are also covered, as are the environmental impact of microplastics, including their presence in air, water, and soil, leading into an examination of the potential effects on human health and wildlife, including plants, animals, insects, and organisms in aquatic habitats. The book concludes with coverage of microplastics in the food chain, policy measures aimed at combating microplastic pollution, and methods for reducing, eliminating, and preventing microplastic, stressing the urgency of innovative solutions and collective action.

  • Handbook of Polyurethanes, Polyureas, and Polyisocyanurates

    • 1 Edición
    • George Wypych
    • Inglés
    Handbook of Polyurethanes, Polyureas, and Polyisocyanurates focuses on the raw materials required for polyurethane synthesis. It explores various isocyanates and polyols, detailing their chemical properties and roles in creating diverse polymer structures. Amines, solvents, catalysts, and other additives that enhance the synthesis process are also discussed, as are typical methods of synthesis, mechanisms of catalysis, factors affecting reaction rates, and potential side reactions that can occur during polymerization. Structures of linear and crosslinked polyurethanes are also covered, including how these configurations influence the physical and chemical properties of the final products. Typical methods for analyzing polyurethanes, allowing for their assessment, characteristics, and qualities are provided, as are the physical-mechanical properties of polyurethanes, including elasticity, tensile strength, and thermal stability. The creation of polyurethane blends and interpenetrating networks is discussed, and the book also features an extensive section on additives used with polyurethanes, such as plasticizers, pigments, flame retardants, and more. Processing methods such as metering, mixing, and storage are outlined, applications of polyurethanes in automotive parts, bedding, medical devices, and packaging are covered, and the book concludes with coverage of waste disposal, processing, and recycling strategies for these products.

  • Geopolymer Concrete

    Advancements in Performance and Sustainability
    • 1 Edición
    • Ildiko Merta + 1 más
    • Inglés
    Geopolymer Concrete: Advancements in Performance and Sustainability is a thorough guide on a research topic in which incremental progress has been made in recent years. To contribute to the extensive investigations into the different aspects of this eco-friendly building material, the editors have selected experts from across the globe, aiming to reflect the worldwide interest shown by the research community.The book opens with fundamental information, such as properties and production (both design and manufacturing techniques). It then includes various applications and useful LCA analysis. Recent advances with particular focus on improvements in durability, strength, and thermal performance are discussed next, with valuable data supplied by real-world case studies. Considerations related to the material’s environmental impact, challenges and barriers to its adoption, and other insights into current standards and regulations conclude the coverage.This multifaceted resource serves not only as a unique source of information for readers in academia as well as industry seeking to stay current in their field but may also prove to be worthwhile reading for those professionals responsible for better and more sustainable construction enterprises.

  • Microbial Corrosion and Deterioration of Engineering Materials

    Analysis and Mitigation Techniques for Engineers
    • 1 Edición
    • Reza Javaherdashti
    • Inglés
    Microbial Corrosion and Deterioration of Engineering Materials: Analysis and Mitigation Techniques for Engineers aims to fill the gap between research and engineering practice when it comes to microbially influenced corrosion (MIC) and deterioration (MID). The book provides practical information to aid decision-making in addressing corrosion threats through clear guidelines for MIC/MID assessment, mitigation, and monitoring based on various materials and industries. Different MIC/MID types, mechanisms, and techniques for control and prevention are outlined. Chapters cover the environmental aspects of corrosion, the distinction between corrosion control and corrosion prevention, and microbial induced corrosion and deterioration in concrete, metals, polymers, and composites. The book emphasizes the consideration of both tactics and strategy when dealing with MIC/MID, with a particular focus on cathodic protection. A chapter featuring practical field-tested tips to assist field engineers with MIC/MID is included, and case studies are featured throughout.

  • Lightweight Composites

    Mechanics, Processing, Properties, and Applications
    • 1 Edición
    • Mrityunjay Doddamani + 2 más
    • Inglés
    Lightweight Composites: Mechanics, Processing, Properties, and Applications provides practical information for all types of lightweight composites, including cutting-edge processing techniques and applications. It highlights the utilization of porosity in design and development of material systems in a unique and innovative way with strength and moduli property maps included throughout. The synthesis, mechanics, characterization, and testing of these materials are each covered at length, with particular attention paid to advanced manufacturing techniques such as 3D printing. Sandwich composites, lightweight nanocomposites, functionally-graded foams, syntactic foams, metal matrix composites, Al and Mg-based composites, and more are covered. Weight critical structural applications in aerospace, automobile, marine, electronics, sports, and biomedicine are also discussed,

  • Brake Pads

    Materials, Manufacturing Processes, and Testing
    • 1 Edición
    • Reza Taherian
    • Inglés
    Brake Pads: Materials, Manufacturing Processes, and Testing offers a comprehensive resource on this vital component of the braking system of a variety of vehicles (passenger cars, light commercial vehicles, buses, trucks, and airplanes). This specialized volume aims to bridge the theory and practice of designing and producing well-performing, greener, and cost-effective brake pads.It encompasses, in Part I, an overview of friction materials already available on the market and other more recently developed formulations and, in Part II, step-by-step examinations of a range of manufacturing parameters with related effects on the specific properties of the selected compounds as well as testing techniques.Discussio... on regulatory standards, literature reviews, case studies, application scenarios, and analytical modeling make for a unique contribution that is not only timely but also shows the field’s potential for ever-growing transformation.

  • Biodegradable Metals and Their Medical Applications

    • 1 Edición
    • Yufeng Zheng
    • Inglés
    Biodegradable Metals and Their Medical Applications presents an authoritative overview of all aspects of biodegradable metals and their biomedical applications from the definition, criteria, classification and alloying design of biodegradable metals to the mechanical property optimization, degradation control, biological effect, surface treatment, and advanced manufacture technologies of various biodegradable alloying systems. In vitro and in vivo biocompatibility evaluations for each kind of degradable metallic biomaterials are also discussed, and medical devices designed for usage within bone, blood, and other body microenvironments are presented, making this a complete resource for researchers in the fields of materials science and biomedical engineering.

  • Encyclopedia of Systems and Control Engineering

    • 1 Edición
    • Zhengtao Ding
    • Inglés
    Encyclopedia of Systems and Control Engineering, 4-volume set, offers a comprehensive overview of fundamental and contemporary topics in control systems. Spanning four volumes, it covers linear and nonlinear systems, and integrates experimental and analytical methodologies. This encyclopedia emphasizes cutting-edge developments, such as data-driven control and machine learning methods, which are crucial in modern industry. Control systems play a pivotal role in various engineering sectors, from Boeing aircraft to Boston Dynamics robots, and are essential for their functionality. This work is designed to be accessible to non-experts while providing authoritative, up-to-date information not readily found elsewhere, making it a valuable resource for researchers and practitioners.

  • Metal Alloys for Hydrogen Storage Applications

    Solid-State Hydrogen Storage in Metal-Based Materials
    • 1 Edición
    • API Popoola + 1 más
    • Inglés
    Metal Alloys for Hydrogen Storage Applications: Solid-State Hydrogen Storage in Metal-Based Materials provides an overview of the fundamentals, mechanics, processing, and application of various metal alloys, intermetallics, metal matrix composites, metal oxides, and other lightweight metal materials for use in hydrogen storage. Titanium-based, magnesium-based, binary type, and high entropy alloys are each covered, as are hydrogen bonding systems, the effects of alloy microstructure on hydrogen storage capacity and efficiency, alloy modifiers, and coatings and additives for alloys. Modeling techniques and approaches to additive manufacturing of components for hydrogen energy storages are also outlined, and various applications are included throughout.

  • High-Pressure Thermoelastic and Thermophysical Properties of Smart Materials

    EOSs at High Pressure and Thermal Properties
    • 1 Edición
    • Anjani Kumar Pandey + 2 más
    • Inglés
    High-Pressure Thermoelastic and Thermophysical properties of smart materials: EOSs at High Pressure and Thermal Properties describes how high-pressure research is instrumental in different sectors and how EOS plays an important role in high-pressure research; displays various EOS modelling techniques; explains thermoelastic and thermophysical properties of materials from EOSs, and provides a blueprint of size and shape dependence thermal properties of smart materials. This book opens with an introduction to high-pressure research, surveys experimental and theoretical tools for study at high pressure, covers the role of EOSs to describe thermoelastic properties and their limitations, looks at different modelling techniques of EOSs, considers how extreme-compression behaviour is different from low-compression behaviour, examines thermoelastic properties of smart materials at high pressure, addresses the search of universal EOSs, analyzes the effect of shape and size on thermal properties of smart materials and culminates in future research. This volume provides researchers and academicians working in the field of high-pressure research and shape / size dependent thermal properties a one-stop reference that summates correlations between different aspects of high-pressure thermoelastic and thermophysical properties of advanced materials. It serves as a thorough introduction for less-experienced readers, but also provides a summary of state-of-the-art in the field to physicists, materials scientists and engineers working to exploit high pressure techniques for possible materials development and application.

  • Binding Materials for Sustainable Construction

    • 1 Edición
    • Nakshatra Bahadur Singh + 2 más
    • Inglés
    Binding Materials for Sustainable Construction brings together a wealth of research-driven knowledge focused on innovative ways to develop and use environmentally friendly binders as alternative replacements for Portland cement in the production of concrete and mortar.The volume includes comprehensive coverage of the latest and most impactful developments and applications of concrete mixes obtained with geopolymers, bio-based materials, chemical and mineral admixtures, nanomaterials, and waste, along with discussions on properties, testing techniques, carbon footprint minimization, and the marked effects of artificial intelligence and machine learning to revolutionize the industry, without skirting considerations related to costs versus environmental viability, quality, safety controls, and much more.To contribute to the in-depth investigations into such a variety of technically and ecologically efficient binding materials, the editors have selected experts from educational institutions, research organizations, and manufacturing companies across the globe in a conscious effort to add diversity to the content and points of view on the subject matter, and also to unambiguously prove the interest that both academic and industry communities worldwide show in driving forward endeavors related to sustainable development.

  • Additive Manufacturing of Magnetic Materials

    Techniques, Materials, Applications, Opportunities and Challenges
    • 1 Edición
    • Moataz Attallah + 1 más
    • Inglés
    Additive Manufacturing of Magnetic Materials: Techniques, Materials, Applications, Opportunities and Challenges outlines different 3D printing techniques that can be employed to create an array of different magnetic materials, along with how these materials can be effectively applied. The book discusses the additive manufacturing (AM) of soft magnets, permanent (hard) magnets, 4D magnetic shape memory alloys, magnetocaloric materials, and rare earth based magnetic alloys. Different AM techniques are covered, including laser powder bed fusion, directed laser deposition, binder jetting, cold spray, and the different influences of these techniques on the microstructure of the material produced.Common challenges are highlighted with solutions also provided, and applications covered include magnetic shielding, actuators, sensors, robotics, and magnetic heat exchangers for solid state heat pumps.

  • Data Science in Metal Forming

    • 1 Edición
    • Li-Liang Wang + 1 más
    • Inglés
    Data Science in Metal Forming provides readers with a framework to collect, visualize, analyze, and characterize metal forming metadata, thus enabling improved design, more efficient production, and more effective application of a range of metals. Chapters introduce concepts and discuss industry 4.0, digital manufacturing, and more. Other sections feature case studies of metal forming data collection spanning several essential procedures and outline methods for data processing when lacking essential information.The book also includes data visualization techniques, insights into how to analyze data from various metal forming processes (stamping, hydroforming, incremental, extrusion, and more) and details on how readers can setup, manage, and most effectively apply their own data repositories.

  • Treatise on Process Metallurgy, Volume 2B

    Unit Processes
    • 2 Edición
    • Seshadri Seetharaman + 4 más
    • Inglés
    Treatise on Process Metallurgy, Volume 2B: Unit Processes, presents various unit processes with an emphasis on mineral processing, hydrometallurgy, and electrochemical materials and energy processes. The book highlights the roles of these processes in beneficiation, rare-earth extraction, utilization of lean resources, coal extraction, and biofuels, reflecting the shift toward green and electrochemical processes. Basic knowledge of thermodynamics and kinetics is provided for better understanding of metallurgical processes. The first section of the book covers mineral processing, providing insight on comminution, separation processes, dewatering, and tailings disposal. The second section focuses on hydrometallurgy, discussing leaching, separation-purificat... metal recovery, and battery materials, and the book concludes with a section studying electrochemical material and energy, featuring coverage of molten oxide electrolysis, molten carbonate fuel cells, various sensors, and ionic liquids. Each section also includes various case studies, demonstrating the use of the concepts in real-world settings.

  • Metals as Clean Fuels

    • 1 Edición
    • Eric Detsi + 1 más
    • Inglés
    Metals as Clean Fuels explores the innovative use of metals as a sustainable energy source. It presents a scalable selective leaching method to activate metal fuels by increasing their surface-to-volume ratio, significantly enhancing their reactivity with water for hydrogen and heat generation. This approach positions metal fuels as a superior alternative to fossil fuels, offering higher energy density and the crucial benefit of generating energy without CO2 emissions. Additionally, the book addresses key questions and working principles in its initial chapters before delving into the energy densities of various metals, from zinc to aluminum.Chapters 8 and 9 focus on novel sustainable fabrication methods for metal/metal nanocomposites, while Chapter 10 introduces an advanced methodology for analyzing porous material systems. This monograph is a pioneering work in discussing nanostructured metals as clean fuels, with the potential to drive significant advancements in energy applications and material science research.

  • Treatise on Process Metallurgy

    Volume 5: Energy, Environment, and Future Aspects of Process Metallurgy
    • 1 Edición
    • Seshadri Seetharaman + 3 más
    • Inglés
    Treatise on Process Metallurgy: Volume 5: Energy, Environment, and Future Aspects of Process Metallurgy, Second Edition is divided into two parts, with the first covering sustainable development as it pertains to process metallurgy, addressing issues arising from sustained economic growth, long-term mineral and metal supply, and energy requirements in metallurgical industries. It also examines energy resources, including fossil and renewable sources, and discusses the resource efficiency of the circular economy through simulation-based analyses. The second part delves into the future of metals production globally, with a focus on raw material and energy availability. It presents current CO2 emissions and future projections, with emphasis on reducing CO2 generation in steelmaking technologies. Additional topics discussed include flash smelting, FINEX process outlook, the rotary hearth furnace, and an extensive coverage of hydrogen steelmaking.

  • Sustainable Packaging Strengthened by Biomass

    Applications and Advancements
    • 1 Edición
    • Arbind Prasad + 3 más
    • Inglés
    Sustainable Packaging Strengthened by Biomass: Applications and Advancements explores the pivotal role of bioplastics in addressing packaging concerns within the food industry, enhancing delivery chains and streamlining waste management. Each chapter offers a detailed analysis, providing a thorough overview of present and future biodegradable materials. From untapped natural resources to bio-based materials like polyhydroxyalkanoate and polylactic acid, users will discover key components shaping the industry. The book also examines surface modification, biocomposites, and additives, emphasizing their role in adjusting biodegradability and properties, particularly in gas and moisture barriers.This is a must-read guide for those seeking a concise understanding of sustainable packaging and its transformative impact on the future.

  • Mechanical Behavior of Materials

    Deformation and Design
    • 1 Edición
    • Rajiv S. Mishra + 2 más
    • Inglés
    Mechanical Behavior of Materials: Deformation and Design adopts a design-led approach to the teaching of mechanical behavior of materials in which the underlying fundamental science is presented in the context of design. This approach has been found to help motivate and engage students through real-life case studies and illustrative applications. In addition to the design-led approach, Mishra and Charit cover newer content not found in other textbooks, such as recent advances in microstructural characterization techniques and up-to-date presentation of fundamentals that link the microstructure of engineering materials with realistic mechanical response.

  • Multi-material Additive Manufacturing

    Processing, Properties, Opportunities, and Challenges
    • 1 Edición
    • Ajit Behera + 1 más
    • Inglés
    Multi-material Additive Manufacturing: Processing, Properties, Opportunities, and Challenges outlines various methods for the additive manufacturing of multi-material polymers, metals, ceramics, and metal-ceramics, showing readers how to tailor these materials with specific properties and specialized applications. The first section of the book discusses the role of machine and process parameters, the selection of raw materials, interface control, thermodynamic calculations, and process simulations. The second section covers additive manufacturing techniques for multi-materials, and the book concludes with a section covering the different multi-materials that can be produced and their various applications, such as in electronics, biomedical engineering, and high-end mechanical instruments.

  • Metal Cutting

    Theory, Selection, and Design
    • 5 Edición
    • Edward M. Trent + 2 más
    • Inglés
    Metal Cutting, Fifth Edition builds upon the classic work that has for decades been the go-to reference for individuals working in the area of metal cutting. This revised edition, divided into four parts, features an extensive new chapter on coated cutting tools and updated and expanded chapters on ceramic cutting tools and machinability. A discussion of wear mechanisms and their governing equations is included, as are updates on tool micro examination, use of the quick-stop method, and tool temperature determination. Each chapter begins with a comprehensive bullet point summary and contents. The book will be useful for those studying and teaching courses on metal cutting and machining processes at the advanced undergraduate and graduate levels in universities as well as professional materials scientists and mechanical engineers in industrial manufacturing sectors centered on automotive and aerospace component production.

  • Design and Application of Intelligent Thermally Conductive Materials

    • 1 Edición
    • Wei Feng
    • Inglés
    Design and Application of Intelligent Thermally Conductive Materials is a current, comprehensive, reference resource, providing information on the structure, design, and application of these newly developed materials in various contexts, together with an analysis of future trends and applications. The author presents a detailed description of the application of these intelligent materials to a wide range of uses, and also of their particular importance in the development and application of advanced chips. It provides postgraduates and senior undergraduates with an essential overview of thermal conductivity, from which to appreciate the descriptions of intelligent thermal conductivity.For all readers, including researchers, industry professionals, and technicians in the field, chapters on the structure, design, development and performance of intelligent thermal conductive materials provide essential information. While the potential future demand for these materials is enormous, the author indicates where developmental, technical, and production bottlenecks may occur. The possible use of intelligent thermal conductive materials in a wide range of contexts is discussed, together with their potential for energy saving and resource conservation.

  • Comprehensive Green Materials

    • 1 Edición
    • Abdul Ghani Olabi
    • Inglés
    Green Materials are materials that are understood to have at least one of the two following attributes: sustainability or low environmental impact. Optimally, they have these two labels simultaneously.Compr... Green Materials, 3 volume set, is the first fully-integrated resource to provide a full and comprehensive source of information and knowledge for both researchers and practitioners around the world on the fundamental, characteristics, applications, latest developments and case studies of Green Materials. Each in-depth review chapter is written by internationally recognized experts and contributions come from scientists working in a broad range of topics, including materials science, green energy, green industry and construction, engineering and green chemistry.

  • Metal Fatigue Testing and Analysis

    Theory and Practice
    • 1 Edición
    • Yung-Li Lee
    • Inglés
    Metal Fatigue Testing and Analysis: Theory and Practice provides the theoretical knowledge and practical skills required to design durable metallic structures and components. The book thoroughly reviews fatigue and reliability theories for product durability designs, analyses, and validations, highlighting the latest advances and identifying key challenges. It is structured to guide readers in how to design targets from mission profile data, which is crucial in ensuring that structures (vehicle, systems, and components) meet the specific requirements of their applications. Insight is provided on how to analyze and design structures based on established targets, with practical insights and methodologies for structure designs provided.Readers are guided through the development of validation tests to assess the durability of their designs, with emphasis placed on the importance of implementing reliability demonstration tests to ensure that test structures meet the design targets.

  • Weathering

    Testing Manual
    • 1 Edición
    • George Wypych
    • Inglés
    Weathering: The Testing Manual provides guidelines and procedures for conducting weathering tests on various materials and products to simulate the effects of exposure. The methods of weathering discussed are based on requirements of ASTM, ISO, BS, Ford, GM, IEC, IEEE, MIL, PV, SAE, UL, and VDA standards. The book details the methods used, their differences, parameter settings, and hardware that is commercially available for performing the tests. Also included is information on sample preparation, evaluation methods, frequency of data collection, data analysis and interpretation, and reporting.This book is an excellent companion piece to the Handbook of Weathering, Seventh Edition, as well as The Encyclopedia of Polymer Degradation, with the former serving as a monographic source of knowledge on various aspects of weathering, and the latter outlining the limitations and challenges of presently conducted weathering studies to formulate needs and directions for transition from present comparative evaluation to knowledge-based utilization of existing resources. These three books together are powerful tools for chemists, chemical engineers, materials scientists, environmental chemists, legislators, teachers, and students.