Saltar al contenido principal
Elsevier

Libros en Compuestos

  • Bamboo Fiber-reinforced Composites

    Fabrication, Performance, Sustainability and Applications
    • 1 Edición
    • Md Zillur Rahman + 2 más
    • Inglés
    Bamboo Fiber-reinforced Composites: Fabrication, Performance, Sustainability and Applications extensively covers the classifications, basic structure, compositions, extraction, morphology, processing and surface modification, and properties of various types of bamboo fibers. It also delves into the processing, fabrication, characterizations, and diverse applications of multifunctional composites consisting of bamboo fibers and their diverse matrices (thermoplastics, thermosets, elastomers, biopolymers, geopolymers, biodegradable polymers and concrete), along with their applications in aerospace, automotive, sports equipment, medical devices, wind turbines, infrastructure, water purification, piezoresistive sensors, fire retardants, EMI shielding, and eco-friendly packaging.Finally, the book also addresses significant issues and emerging challenges related to bamboo fiber composites, including manufacturing, processing parameters, dimensional stability, and sustainability.

  • Basalt Fiber Reinforced Composites

    Fundamentals, Properties and Applications
    • 1 Edición
    • Md Zillur Rahman + 2 más
    • Inglés
    Basalt Fiber Reinforced Composites: Fundamentals, Properties and Applications provides a comprehensive, up-to-date resource on the fundamentals, manufacturing, properties, and diverse applications of these materials. The book covers the chemical composition, extraction, manufacturing, surface modification, functionalization, morphology, and properties of basalt fibers. It also delves into the processing, fabrication, characterization, and diverse applications of multifunctional composites consisting of basalt fibers and a diverse range of matrices, including thermoplastics, thermosets, geopolymers, and concrete.With an international author base from across the globe, the chapters provide a cutting-edge overview of recent advancements in production, modification, characteristics, and uses of these materials. The book will be a valuable reference resource for academic and industrial researchers who want to familiarize themselves with the current state-of-the-art and emerging research trends in this important field. It will assist them in finding solutions to both fundamental and applied problems within their chosen research areas.

  • Graphene Quantum Dot-based Polymer Nanocomposites

    Synthesis, Functionalization to Applications
    • 1 Edición
    • Srikanta Moharana + 1 más
    • Inglés
    Graphene Quantum Dot-based Polymer Nanocomposites: Synthesis, Functionalization to Applications presents an extensive review of the latest advances in this important research field. The chapters emphasize recent developments in the synthesis, surface modification, characterization, properties, and cutting-edge practical applications of these materials across various scientific and technological fields. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, and all those working in the research and development of graphene quantum dots and their polymer nanocomposites for a broad range of different applications.

  • Wood-Based Composites

    Chemistry, Design Formulations, Properties and Applications
    • 1 Edición
    • Md Zillur Rahman + 1 más
    • Inglés
    Wood-Based Composites: Chemistry, Design Formulations, Properties and Applications covers the chemistry, structure, design formulations, processing and engineering, surface treatment, and properties of wood, along with the processing, fabrication, characterization, and diverse applications of multifunctional wood-based composites. With an international author base of renowned subject experts from around the globe, the book provides a cutting-edge overview of various topics, including recent advancements in production, modification, characterization, and applications of distinct wood-based composites.The book will be a valuable reference resource for academic and industrial researchers, as well as materials scientists who are looking to familiarize themselves with the current state-of-the-art and emerging research trends in the development of multifunctional wood-based composites, as well as their fabrication, properties, and performance evaluations for various types of applications.

  • Polymer-Based Hybrid Composites

    Emerging Trends and Applications
    • 1 Edición
    • Senthil Muthu Kumar Thiagamani + 4 más
    • Inglés
    Polymer-Based Hybrid Composites: Emerging Trends and Applications presents the latest advances in this important field. The book emphasizes the hybridization of reinforcing phases in terms of precisely optimizing the properties of these materials. A wide range of fibers and matrices are discussed, along with key challenges from basic principles to applications. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, and other professionals working in the development of polymer-based hybrid composites for a broad range of different applications.

  • Green Synthesized Nanofillers for Smart Polymer Composites

    Synthesis, Properties and Applications
    • 1 Edición
    • Srikanta Moharana + 3 más
    • Inglés
    Green Synthesized Nanofillers for Smart Polymer Composites: Synthesis, Properties and Applications provides a precise and extensive review of green chemistry mediated synthesis for various types of nanofillers and their use in hybrid polymer nanocomposites. Emphasis is placed on their properties, characterization, and practical use in a broad range of different technological applications. This book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, chemists, and manufacturers who are working in the development of green polymer nanocomposites and their related applications.

  • Innovations and Advancements in Lightweight Fiber Composites

    • 1 Edición
    • Laongdaw Techawinyutham + 3 más
    • Inglés
    Innovations and Advancements in Lightweight Fiber Composites provides a detailed review of recent developments in this important research field. With contributions from leading experts in the field, the book explores the revolution in the use and application of these materials. It discusses key aspects in design and manufacturing principles and delves deep into the various types of fiber reinforcements, including both synthetic and natural fibers. Sections cover key innovations in advanced fiber materials, novel manufacturing techniques, and design strategies that define the limits of strength, durability, and sustainability. Through a series of case studies showcasing real-world applications, readers will gain a solid understanding of the advanced materials technologies that bridge the gap between theory and industrial application.

  • 3D Printing of Carbon-based Materials

    Cutting Edge Design, Innovative Technology and Practical Applications
    • 1 Edición
    • Chaudhery Mustansar Hussain
    • Inglés
    3D Printing of Carbon-Based Materials: Cutting Edge Design, Innovative Technology and Practical Applications bridges the gap between theory and practice. The book delves deep into the intricacies of printing with carbon-based materials and explores their diverse range of applications across various industrial sectors. Sections provide a holistic overview of 3D printing techniques tailored specifically for carbon-based materials. Through a combination of theoretical insights, practical methodologies, and real-world case studies, the book offers the reader (researcher and engineer) with actionable guidance for optimizing material selection, printing parameters, and post-processing techniques to achieve desired outcomes in terms of mechanical properties, surface finish, and functionality.Moreov... it addresses the growing demand for sustainable manufacturing solutions by highlighting the role of carbon-based materials in mitigating environmental impacts and promoting resource efficiency.

  • Hybrid Nanofiller Reinforced Thermoset Nanocomposites

    • 1 Edición
    • Nisa V. Salim + 3 más
    • Inglés
    Hybrid Nanofiller Reinforced Thermoset Nanocomposites provides a comprehensive review of the latest advances in this important research field. The book covers all aspects and terminologies, from fundamentals to advanced high-end applications. The effect of shape and aspect ratio, along with synthesis protocols and their impact on ultimate properties are examined in detail. Recent advancements in simulation, characterization, mechanism reinforcement, and high-end applications are also explored. With contributions from international experts, readers will gain valuable insights into the latest developments in this fast-evolving research field.The book will be a valuable reference source for academic and industrial researchers, materials scientists and engineers, chemists, industrial manufacturers, and other professionals working in the field of hybrid nanofiller reinforced thermoset nanocomposites for high-end applications.

  • Mechanical Behavior of Fiber-reinforced Polymer Composites

    Fundamentals, Advanced Studies, and Current Trends
    • 1 Edición
    • Manoj Kumar Singh + 4 más
    • Inglés
    Mechanical Behavior of Fiber-reinforced Polymer Composites: Fundamentals, Advanced Studies, and Current Trends offers a thorough exploration of key advancements in the study of fiber-reinforced polymer composites. The book begins by outlining the basic principles that govern the mechanical properties of both polymers and fibers, delving into how their interaction determines composite performance. It provides an extensive overview of essential materials, manufacturing techniques, and various testing methodologies such as tensile, compression, flexural, impact, and fatigue tests. By examining how fiber orientation and production processes influence mechanical outcomes, this reference helps readers understand the factors affecting composite strength and behavior.The text also dedicates significant attention to failure mechanisms like delamination, matrix cracking, and fiber breakage, offering detailed explanations of each. It explores the effects of environmental aging on outdoor applications and integrates contemporary topics including numerical analysis, modeling, and artificial intelligence methods.

  • Smart Self-Healing Polymer Nanocomposites

    Processes, Performance and Applications
    • 1 Edición
    • Md Enamul Hoque + 1 más
    • Inglés
    Smart Self-Healing Polymer Nanocomposites: Processes, Performance and Applications provides a detailed review of the latest advances in this important research field. The book explores the fundamental principles, synthesis methodologies, characterization techniques, performance characteristics, and practical applications associated with these materials. It focuses on the underlying mechanisms driving self-healing behavior, including the encapsulation of healing agents, reversible chemical bonds, and stimuli-responsive triggers, offering readers a detailed understanding of the molecular-level interactions that enable these materials to repair damage. Moreover, the book examines the influence of nanofillers, such as nanoparticles and nanofibers, on enhancing mechanical properties, imparting multifunctionality, and facilitating self-healing capabilities.This will be a valuable reference resource for both researchers and engineers who are seeking to push the boundaries in materials science and harness the transformative power of self-healing polymer nanocomposites for a sustainable future.

  • Natural Fiber Composites

    Emerging Trends and Applications
    • 1 Edición
    • P. Senthamaraikannan + 2 más
    • Inglés
    Natural Fiber Composites: Emerging Trends and Applications discusses the properties and applications of plant fibers used as reinforcements in composite materials. Additionally, potential applications of plant fiber-reinforced composites across industries are discussed in detail via practical case study examples, along with recent developments in testing and fabrication. Valuable insights into sophisticated surface modification methods that aim to optimize composite performance by enhancing fiber-matrix adhesion are also covered. In addition to discussing challenges and optimization strategies, this book will be a valuable reference resource, giving readers (researcher and engineer) the knowledge required to fabricate environmentally sustainable composite materials that exhibit superior performance.

  • Polymer Composites for Intelligent Food Packaging Solutions

    • 1 Edición
    • Shakeel Ahmed + 1 más
    • Inglés
    Polymer Composites for Intelligent Food Packaging Solutions offers a comprehensive exploration on the use of polymer composites in innovative and sustainable food packaging solutions. This contemporary guide examines fundamental principles, selection criteria, characterization methods, and recent advances in polymer science and packaging technology. With a focus on bio-based, nano-enhanced, and biodegradable materials, it provides researchers, engineers, and professionals with essential knowledge on flexible, rigid, active, and intelligent packaging solutions. By analyzing upcoming trends, challenges, and real-world scenarios, it fosters progress in developing safer, and more efficient packaging solutions, benefiting those seeking to improve their understanding of polymer composites usage in food packaging applications.This book will serve as an authoritative reference on leveraging polymer composites to meet growing demands through interdisciplinary insights and emphasis on practical implementation, exploring distinct advantages of various composite categories for intelligent packaging solutions.

  • Recycled Polymers and their Composites

    Processing, Properties and Applications
    • 1 Edición
    • Hind Abdellaoui + 2 más
    • Inglés
    Recycled Polymers and Their Composites: Processing, Properties and Applications provides a comprehensive exploration of the entire lifecycle of these materials that are utilized in a broad range of different applications. Beginning with a brief introduction to fundamental principles, the book then goes on to address both environmental and sustainability aspects. Next, a material design section covers essential aspects such as fiber selection, polymer matrices, and cutting-edge recycling methods. Subsequent chapters cover recycling techniques, physical, chemical and mechanical characterization methods, properties, simulation techniques, practical insights into various applications, and economic, social, regulatory, and environmental aspects.The book’s multidisciplinary and practical approach will equip readers (academic and industrial researcher) with a holistic understanding of the challenges and opportunities for using these materials in a broad range of applications. It will help researchers make informed decisions that contribute to, and support sustainable engineering practices.

  • Animal and Agricultural Waste Biomass and their derived Biocomposites

    • 1 Edición
    • Sathish Kumar Palaniappan + 4 más
    • Inglés
    Animal and Agricultural Biomass and their derived Biocomposites comprehensively explores the experimental, analytical, and practical aspects of creating biocomposites from animal and agricultural waste biomass. The book investigates waste valorization strategies, biomass conversion procedures, and the role of these biocomposites in fostering a circular economy. It aims to provide an in-depth understanding of the characteristics, uses, and environmental benefits of biocomposites derived from renewable resources, specifically agricultural and animal waste. In addition, it addresses the substitution of petroleum-derived products with eco-friendly alternatives, emphasizing novel waste conversion techniques, biodegradability, and lifecycle analyses to assess environmental impacts.It is the first publication to cover this concept extensively, offering updates on finite element analysis of polymers and their composite materials. Contributions from global experts enrich the content, making it invaluable for academics, researchers, engineers, and students.

  • Additive Manufacturing of Polymer Composites

    Technologies, Materials, and Applications
    • 1 Edición
    • Hamid Reza Vanaei + 3 más
    • Inglés
    Additive Manufacturing of Polymer Composites: Technologies, Materials, and Applications provides a comprehensive and multidisciplinary exploration of the intersection between additive manufacturing (AM) and polymer matrix composites (PMCs). The book covers new developments such as smart composites, 4D printing, and AI-driven process optimization—areas not yet fully addressed in the current literature. Its content structure follows a logical progression: it begins with a foundational overview of AM and PMCs, explores materials and their properties, examines technological processes and process parameter optimization, and then addresses advanced characterization, quality control, and applications.Future perspectives, including sustainability, smart materials, and digital innovations are also included. Key themes include material-process integration, quality assurance, sustainability, and the application of AM-PMCs in complex engineering contexts.

  • Cellulose Technologies

    Innovations and Applications
    • 1 Edición
    • Kalim Deshmukh + 2 más
    • Inglés
    Cellulose Technologies: Innovations and Applications provides a comprehensive overview of the latest advances in this field. The book covers the synthesis, properties, and diverse applications of cellulose and its derivatives while also examining synthesis techniques, structural aspects, and various properties, including electronic, optical, magnetic, mechanical, thermal, and tribological properties. Additionally, exfoliation and functionalization methods, along with microscopic and spectroscopic characterizations of cellulose are also discussed. Applications of cellulose in a wide range of fields such as 3D printing, electronics, photonics, biosensors, energy storage, water treatment, EMI shielding, and biomedical applications are addressed in detail.The diverse array of topics covered make this book a valuable reference resource for all individuals engaged in the cellulose domain, particularly for the development of new innovations and advanced applications.

  • Advanced Manufacturing and Machining Aspects of Composite Materials

    • 1 Edición
    • Rajesh Kumar Verma + 4 más
    • Inglés
    Advanced Manufacturing and Machining Aspects of Composite Materials explores the complex world of composite materials, focusing on advanced manufacturing techniques and machining processes. The book begins by explaining the fundamentals of composite materials, including their distinct features and characteristics. It then investigate various production procedures, from traditional to cutting-edge technology, providing insights into the complexities of constructing these robust structures. A significant proportion of the book focuses on machining elements, with detailed descriptions on how to perform it more efficiently.Specific sections explore the field of precision machining, specifically examining the selection of tools, cutting settings, and process optimization, with a goal of improving efficiency while preserving the integrity of composite structures. Readers will learn how to pick the most suitable tools, adjust cutting settings, and optimize process parameters to improve productivity whilst avoiding harm to the delicate composite structure.

  • Recycling and Reuse of Composite Materials

    • 1 Edición
    • N. M. Nurazzi + 4 más
    • Inglés
    Recycling and Reuse of Composite Materials presents the latest developments in this important research field. The book begins with a brief introductory section explaining the fundamentals of composite recycling including sorting and separation techniques for waste composites. Thermal, mechanical and chemical recycling processes are then discussed in detail as well as information on the additives used in recycled composites. The middle section of the book then discusses the various types of recycled composites that are currently commercially available and their related technology. These include thermoplastic, thermoset-matrix waste, metal-waste and rubber-polymer based composites. The utilization of lignocellulosic waste is also discussed in detail.The chapters address the challenges and solutions in recycling these complex structures for a board range of different applications. With its focus on idea generation and informed decision-making, the book will serve as a valuable reference resource for individuals engaged in research, design, and engineering across both public and private sectors, fostering a vision for sustainable product development.

  • Additive Manufacturing of Polymer Composites

    Materials Processing, Structural Designs and Applications
    • 1 Edición
    • Yasir Beeran Pottathara + 2 más
    • Inglés
    Additive Manufacturing of Polymer Composites: Materials Processing, Structural Designs and Applications presents the latest developments in this important technological field. Sections focus specifically on polymer composites used in additive manufacturing, offering a detailed exploration of not just the materials and their properties but also their specialized applications such as electrically conductive, metal-polymer, and shape memory polymer composites. The book also discusses the basic principles of the manufacturing processes, material selection, and structural design. Furthermore, it covers the latest advancements in surface engineering, post-treatment processes, and the use of these materials in various industrial sectors.This will be a valuable reference resource that equips the researcher with key knowledge on the latest research trends, commercialization prospects, and environmental impacts of these additively manufactured materials and their application across various industries.

  • Special Techniques of Natural Dyeing using Mordants and Modifiers

    • 1 Edición
    • Padma Shree Vankar + 1 más
    • Inglés
    Special Techniques of Natural Dyeing using Mordants and Modifiers explores the development of special auxiliaries that enhance the colorfastness, color depth, and sustainability of naturally dyed fabrics that maintain low carbon footprints. Key topics include chapters on mordants, bio-mordants, transitional metal salts, and rare earth salts. Additionally, the book covers various modifiers and auxiliaries designed to improve color adherence, as well as a chapter dedicated to post-mordanting treatments with amino compounds. Natural dye enthusiasts will gain valuable insights into using mordants sustainably, achieving vibrant, long-lasting colors from common flowers and other local vegetative materials.

  • Multi-scale Mechanics of 2D Triaxially Braided Composites

    Characterization, Mechanics and Machine-Learning Based Modelling
    • 1 Edición
    • Chao Zhang + 1 más
    • Inglés
    Multi-scale Mechanics of 2D Triaxially Braided Composites: Characterization, Mechanics and Machine-Learning Based Modelling presents the latest advances in this important research field. The book begins with a brief introduction to these materials including their mechanical features, damage and failure mechanisms and typical applications. The contents are then divided into three main sections on experimental characterization; mechanics-based modeling and machine-learning based modeling approaches. By taking a multi-scale modeling approach, that includes progressive damage and impact simulation, as well as theoretical modelling, machine-learning and multi-scale mechanics aspects, the author presents key findings in this important field. A systematic introduction is given to the multi-scale and machine-learning based modeling approach, along with their corresponding source codes for the progressive damage model. Then an up-to-date theoretical model is also presented, as well as, high-efficient finite element mesh of the unit cell, for conducting multi-scale analysis and design of these materials and structures. Numerical examples are also presented to illustrate the application of presented methods for quasi-static and impact problems. To enhance the reader’s understanding numerous engineering case studies are also included, together with examples of material/structure optimization. The book provides the latest knowledge and methodology for the design and analysis of aerospace structures and other materials technologies, guiding the researcher to understand this cutting-edge research framework.

  • Tribology of Fiber Materials and Composites

    • 1 Edición
    • Vijay Raghunathan + 4 más
    • Inglés
    Tribology of Fiber Materials and Composites presents the latest advances in this important research field. The book explores the friction and wear characteristics of various types of composites, namely polymeric, at both dry and wet conditions that influence the service life. Focusing on proficient tribological testing methods it examines the impact of testing conditions on overall performance. Along with relevant case study examples, the book provides valuable insights into the factors affecting tribological performance in a diverse range of different sectors including automotive, aerospace, and marine applications. Covering materials selection, test methodologies, and parameter choices, the book will provide valuable insights into the latest advancements on the analysis of friction and wear properties, as well as the factors that influence tribological behaviour for a broad range of composites made from different types of fibers. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, and other professionals who want to know more about the tribological behavior and performance of fiber-reinforced composites and their associated applications.

  • Carbon Fiber Reinforced Thermoplastic Composites

    Fabrication, Properties and Applications
    • 1 Edición
    • Md Zillur Rahman + 2 más
    • Inglés
    Carbon Fiber Reinforced Thermoplastic Composites: Fabrication, Properties and Applications covers both current and emerging research trends in the development of multifunctional CFRTCs, as well as their fabrication, properties, and performance evaluation. The book also addresses significant issues and emerging challenges related to CFRTC manufacturing, including processing parameters, damage mechanisms, machining, recycling, and sustainability. Additionally, it covers molecular modeling, dynamic simulations, and 3D printing. It will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, and other professionals working in the development of carbon fiber reinforced thermoplastic composites and their related applications.

  • Piezoelectric Composite Materials

    Theory, Design, and Applications
    • 1 Edición
    • Satyaranjan Bairagi + 2 más
    • Inglés
    Piezoelectric Composite Materials: Theory, Design and Applications provides a detailed overview of the latest advances in this important research field. Comprehensive in its coverage, the book offers a detailed review of the theoretical foundations, practical design considerations, and wide-ranging applications of these materials. This book will be an essential reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, industrial R&D, and other professionals who are working on the development and use of piezoelectric composite materials for a broad range of different applications.

  • Structural Reliability and Health Monitoring of Composite Structures with Artificial Intelligence

    • 1 Edición
    • Wael A. Altabey
    • Inglés
    Structural Health Monitoring of Composite Structures with Artificial Intelligence offers a comprehensive review of the application of AI in the SHM of composite structures. Sections cover new developments such as the use of machine learning, deep learning, and artificial neural networks in SHM, while also illustrating the integration of non-destructive testing (NDT) methods with AI algorithms. The content structure follows logical progression: from basic material concepts, design, manufacturing and fabrication, through damage and failure modes, advanced SHM monitoring, probabilistic design concepts, and AI based schemes for SHM.In addition, a full chapter is also dedicated to applied case studies in pipelines, ducts, and plates) using analytical, numerical, and simulation tools (ANSYS, MATLAB). The book’s key audience includes postgraduate students, academic researchers, and practicing engineers who are working in civil, mechanical, materials, and aerospace engineering.

  • Ceramic Nanocomposites

    Interface Design, Processing and Applications
    • 1 Edición
    • Rotimi Sadiku + 3 más
    • Inglés
    Ceramic Nanocomposites: Interface Design, Properties and Applications provides a detailed review of the latest advances in this field. The book thoroughly explores every aspect, from preparation techniques to performance testing and practical applications. It not only shares the latest research findings but also systematically summarizes various preparation methods and design strategies. Sections focus on the selection of nanofillers, interface optimization techniques, and how these factors influence key properties of the resultant composites such as mechanical strength, thermal stability, and electrical properties.Additiona... the book extensively discusses the application prospects of nanocomposites in high-performance electronics, biomedical, and energy storage, and conversion sectors, offering a systematic theoretical and practical perspective. This makes it a comprehensive guide for developing new ceramic nanocomposite materials and promoting their industrial applications.

  • Advances in MXene Polymer Composites

    Synthesis, Structural Analysis, and Applications
    • 1 Edición
    • Sunaja Devi K. R + 2 más
    • Inglés
    Advances in MXene Polymer Composites: Synthesis, Structural Analysis, and Applications focuses on synthesis methods, characterization techniques, fundamental properties, and cutting-edge applications across various industrial sectors. It addresses the unique properties and performance of these materials, including mechanical strength, electrical conductivity, thermal stability, and surface properties. With practical case studies, the book explores innovative uses of these materials across various research domains, making it a valuable reference resource for academic and industrial researchers, materials scientists and engineers, as well as manufacturers and other professionals who are working in the development of MXene-based polymer composites for a broad range of industrial applications.

  • Metal Matrix Composites

    Materials, Processing, Properties and Applications
    • 1 Edición
    • Yashas Gowda T G + 1 más
    • Inglés
    Metal Matrix Composites: Materials, Processing, Properties and Applications provides a comprehensive examination of these materials, covering not only the basics, but also sophisticated processing methods for real-world applications. Chapters cover materials selection, manufacturing techniques, mechanical and thermal characteristics, and other important factors that need to be considered when applying these materials in practical situations across various industrial sectors. With contributions from prominent authorities in the field, this book will be a valuable reference resource for academic and industrial researchers, materials scientists, engineers, manufacturers, and other professionals.The book's in-depth information and knowledge on the possible advantages, difficulties and uses of applying these materials across various industrial applications makes it a welcomed resource.

  • Life Cycle Assessment of the Environmental Impact of Natural Materials

    • 1 Edición
    • Sanjay Mavinkere Rangappa + 3 más
    • Inglés
    Life Cycle Assessment of the Environmental Impact of Natural Materials explores the LCA of natural materials that are currently being utilized in product development. The book covers LCA theories, strategies, and current methodologies and presents the vital role that LCA plays in assessing the environmental impact of natural resources in different industries, including agriculture, mining, bio-based products, and textiles. It demonstrates how LCA can be used to steer the creation of environmentally-frie... products and to advance sustainability within the circular economy. In addition, the book demonstrates ways of incorporating LCA into everyday decision-making processes, with a particular emphasis on diverse industrial sectors.It will be a valuable reference resource for all those who are concerned about the environmental safety and sustainability of natural materials that are used in the development of environmentally- friendly products. It will allow the reader to make well-informed decisions regarding natural resources to actively participate in environmentally-cons... practices.

  • Nanocomposites for Membranes and Environmental Remediation Applications

    • 1 Edición
    • N. M. Nurazzi + 2 más
    • Inglés
    Nanocomposites for Membranes and Environmental Remediation Applications delves into the transformative potential of nanomaterials, shedding light on their theoretical foundations, chemistry, and practical uses. The book examines both synthetic and naturally sourced nanomaterials, detailing their processing techniques, such as modification and synthesis, and their applications in creating high-performance composites for sustainable membranes. With its comprehensive approach, the text integrates case studies that explore nanocomposite design, materials selection, and characterization, alongside their role in environmental remediation. These studies demonstrate the innovative synergy between nanotechnology and sustainability, positioning the book as an essential resource for advancing this cutting-edge field.Beyond these foundational insights, the book discusses the versatility of nanomaterial resources and their influence on product innovation. It concludes by addressing critical challenges, environmental implications, and future prospects for nanocomposites in sustainable applications. Ideal for researchers, postgraduate students, engineers, and policymakers, this book serves as a guide for pioneering sustainable practices and shaping eco-friendly technologies.

  • Advanced Manufacturing and Joining Technologies for Composite Materials

    • 1 Edición
    • Pawan Kumar Rakesh + 1 más
    • Inglés
    Advanced Manufacturing and Joining Technologies for Composite Materials delves into pivotal advancements that have enhanced performance and cost-effectiveness. The book covers topics not commonly addressed in other references, including automated composite manufacturing, out-of-autoclave curing, nanostructured composites, smart composites, recycling and sustainability, and hybrid composites. Additionally, it addresses the modeling and simulation of composite manufacturing processes and the joining of composite laminates for product development, offering an exciting exploration for readers and learners.Automation and robotics have transformed manufacturing processes, with techniques like automated fiber placement and automated tape laying ensuring precise and consistent reinforcement fiber placement. This minimizes human error, improves repeatability, and expedites production. Material science breakthroughs have given rise to smart composites capable of sensing, responding, and adapting to environmental changes. These smart composites find applications in structural health monitoring, shape-shifting structures, and adaptive aerodynamics.

  • 3D Printing of Polymer Composites

    Fibers, Particles and Matrix
    • 1 Edición
    • Vinod Ayyappan + 4 más
    • Inglés
    3D Printing of Polymer Composites: Fibers, Particles and Matrix explores the complexities of the dynamic interplay between these three components and their interactions in the polymer-based 3D printing process. The book includes theoretical foundations as well as practical applications, providing insights into optimizing material compositions, overcoming challenges related to fiber and particle integration, and for enhancing the overall print quality of materials and final components. It will be a valuable reference for researchers on the intricacies of this technology, enabling them to make informed decisions, troubleshoot key challenges, and push future boundaries on what is possible.

  • Polymer, Metal, and Ceramic Composites Manufacturing

    Material Fundamentals and Conventional and Additive Manufacturing Techniques
    • 1 Edición
    • Kuldeep Agarwal
    • Inglés
    Polymer, Metal, and Ceramic Composites Manufacturing: Material Fundamentals and Conventional and Additive Manufacturing Techniques offers a detailed, comparative analysis of the various techniques that can be used to create these materials, from conventional to cutting-edge. The book provides insights into the fundamentals of composite materials, covering their properties and applications, discussing options for their manufacture, and highlighting challenges, solutions, and best-use applications. Conventional techniques such as vacuum bagging, filament winding, powder metallurgy, solid state welding, and more are outlined. Additive manufacturing techniques covered include fused deposition modeling, stereolithography, selective laser sintering, digital light processing, and more.The book also provides a comparative analysis of these manufacturing techniques, discussing the material properties, manufacturing process efficiency, and environmental impact of both conventional and additive manufacturing of these materials. Case studies, quality control, testing methods, and future trends are also included.

  • Applications of Biopolymers and Biocomposites

    • 1 Edición
    • Mohammad Jawaid + 3 más
    • Inglés
    Applications of Biopolymers and Biocomposites, part of a Two-Volume set, provides comprehensive information on the latest advances in this important research field. The book showcases how these materials are being used to address environmental challenges and create new and innovative solutions in fields such as packaging, where biopolymers offer biodegradability and reduced environmental impact; in the automotive industry, where lightweight and sustainable materials are much sought after; in construction, where biocomposites find use in structural components; and in biomedical fields, where biopolymers are being explored for drug delivery, tissue engineering, and medical devices.By highlighting these real-world applications, the volume facilitates the reader’s understanding on how these materials are contributing to sustainable development and new innovative emerging technologies. As an accompaniment to its sister volume, which focuses on the preparation, processing, and properties of these materials, the two volumes work together to create a comprehensive picture of new developments in biopolymers and biocomposites.

  • Preparation, Processing, and Properties of Biopolymers and Biocomposites

    • 1 Edición
    • Mohammad Jawaid + 3 más
    • Inglés
    Preparation, Processing and Properties of Biopolymers and Biocomposites, part of a Two-Volume set, provides comprehensive information on the latest advances in this important research field. This volume focuses on the preparation, processing, and properties of these materials, providing fundamental principles of processing biopolymers and creating their associated biocomposites are covered in detail. It covers topics such as extraction and purification of biopolymers from natural sources, synthesis of biopolymers through fermentation and bioengineering, and the incorporation of fillers and reinforcements to create biocomposites with unique tailored properties.The volume also explores the characterization techniques used to assess the physical, mechanical, thermal, and chemical properties of these materials. By providing insights into their processing techniques and structure-property relationships, this volume will equip the reader with the knowledge needed to design and engineer these materials for a specific range of applications. As an accompaniment to its sister volume, which focuses on applications of these materials, the two volumes work together to create a comprehensive picture of new developments in biopolymers and biocomposites.

  • Fire-Resistant Nature-Derived Composite Materials for Industrial Applications

    • 1 Edición
    • Rajeshkumar Lakshminarasimhan + 4 más
    • Inglés
    Fire-Resistant Nature-Derived Composite Materials for Industrial Applications presents the latest advances in this important field. The book provides an in-depth understanding of the materials, their properties including both fire resistance and structural integrity, and their industrial applications, including compliance guidelines and safety regulations. The detailed case study examples of successful implementation in industry will bridge the gap between theory and practice. The book will be a valuable reference resource for academic and industrial researchers, as well as materials scientists and engineers who need to keep updated on the latest advances and technologies in fire-resistant composite materials.

  • The History of Composites

    People, Science, Technology and Society
    • 1 Edición
    • Ignaas Verpoest + 3 más
    • Inglés
    The History of Composites: People, Science, Technology and Society introduces the reader to key milestones in the discovery and technological development of composite materials, including their processes and applications. Sections give a “bird’s eye view” that surveys the basic concept of composites from ancient times right through to the crucial inventions of glass fibers and manmade plastics in the 1930’s. Further content explores the revolution of carbon fibers and their nano-descendants graphene and carbon nanotubes while also analyzing the dynamics of innovations to further illustrate how fundamental discoveries have led to the creation of new products or improved existing ones.By presenting these fundamental discoveries, the authors hope to inspire both researchers and engineers in their quest to develop further innovations in composite materials in the future, including both their processes and applications.

  • Processing of Nanocellulose and Nanocellulose-Based Composites

    • 1 Edición
    • Mohammad Jawaid + 2 más
    • Inglés
    The Handbook of Nanocellulose and Nanocellulose-Based Composites is an essential resource that delves into the burgeoning field of nanocellulose and its applications in composite materials. Comprising three distinct volumes, the handbook offers an exhaustive overview, spanning processing techniques to properties and characterization, and ultimately leading to modern applications of nanocellulose. Each volume meticulously covers specific aspects of nanocellulose research, providing valuable insights, methodologies, and case studies that benefit researchers and practitioners aiming to maximize the potential of nanocellulose.It also details the intricate processes involved in the production, modification, and preparation of nanocellulose and its composites. It explores techniques such as mechanical disintegration, chemical modification, and isolation methods from sources like wood, plants, and bacteria. Additionally, the volume addresses challenges in scaling up production, achieving nanocellulose dispersions, and incorporating nanocellulose into different matrix materials, serving as a guide for effective processing strategies.

  • Nanocellulose

    Harnessing Sustainability from Biomass to Biocomposites
    • 1 Edición
    • S.M. Sapuan + 2 más
    • Inglés
    Nanocellulose: Harnessing Sustainability from Biomass to Biocomposites presents a detailed review of the latest advances in nanocellulose-reinfo... biocomposites, with a particular emphasis on their processing, properties, and performance. Through detailed case studies, the book's chapters cover the conceptual design process, including materials selection, fabrication processes, characterization techniques, and innovations in applications and performance. Sections also emphasize the need for meticulous design and tailored process development, which are crucial for selected applications. In addition, the book includes a dedicated chapter on the market value of the global nanocellulose industry and assesses its contributions to sustainability. The mechanical, thermal, and electrical performance properties of these materials are also discussed in detail, as is the structure-property relationship. With its focus on idea generation and informed decision-making, this book will serve as a valuable reference resource for all individuals engaged in this area of research.

  • Multifunctional Carbon Nano-Onions Based Nanocomposites

    Fundamentals, Design and Applications
    • 1 Edición
    • Ayesha Kausar
    • Inglés
    Multifunctional Carbon Nano-Onion Based Nanocomposites: Synthesis, Properties and Applications is a comprehensive guide that delves into the structure, design, fabrication, and functional characteristics of carbon nano-onions (CNOs) and their applications in nanocomposites. The book covers timely and significant advances in the field of CNOs, highlighting their unique microstructural, electrical, thermal, mechanical, tribological, and biological properties. It provides a detailed examination of CNOs' roles in various matrices, including thermoplastics, thermosetting polymers, conjugated polymers, rubbers, metals, and metal oxides. Key topics include environmental sustainability, energy storage and conversion (such as solar cells and lithium-ion batteries), electronic applications (sensors), and biomedical applications.In addition, it discusses the challenges and opportunities faced by researchers in the field and the industrial-scale production and economic aspects of these materials. The structure is organized to first introduce the fundamental aspects of CNOs and then progressively dive into specific applications and future prospects. It is intended for researchers, engineers, and academics interested in nanotechnology and nanocomposites, serving as a vital resource for understanding the evolving landscape of CNO nanocomposites and their wide-ranging applications in modern science and technology.

  • Smart Rubber Nanocomposites

    Opportunities, Innovations and Roadblocks
    • 1 Edición
    • Saritha Appukuttan + 2 más
    • Inglés
    Smart Rubber Nanocomposites: Opportunities, Innovations and Roadblocks provides an up-to-date and comprehensive review of the latest advances and technological developments in this important research field. The book's chapters focus on the synthesis, processing, properties, and applications of these materials in a broad range of different industrial sectors. Starting with a brief overview of the fundamentals, particular attention is then given to the application of these materials in a broad range of diverse technological ‘smart’ applications.The book will be an essential reference resource for Academic and industrial researchers, materials scientists, engineers, and manufacturers working in the development of rubber products, composites, and rubber nanocomposites.

  • Advanced Cutting and Machining Processes for Composites and Biocomposites

    • 1 Edición
    • S. M. Sapuan + 5 más
    • Inglés
    Advanced Cutting and Machining Processes for Composites and Biocomposites focuses on the latest advances in this important research field, covering a broad range of composites and presenting various case studies related to conventional and unconventional cutting processes in terms of optimization, cutting analysis, and cutting tools. Key challenges in terms of quality and their impact on the final product are also discussed in detail. The book also contains experimental studies that explain how various machining and cutting techniques can be used to obtain the best results by controlling different operating input parameters.This will be a valuable reference resource for materials scientists, designers, manufacturers, and engineers as it provides extensive information on cutting and machining of composite materials as well as the cutting properties of these materials. It also presents experimental results and final concepts that will benefit manufacturers to achieve efficient cutting operations to avoid defects and reduce their impact on the final product.

  • Banana Fibres and their Composites

    Processing, Design, Properties and Applications
    • 1 Edición
    • Mohammad Jawaid
    • Inglés
    Banana Fibres and their Composites: Processing, Design, Properties and Applications is a comprehensive resource that delves into the transformative potential of banana fibers in material science. Starting with an extensive overview of the fiber extraction and preparation process, the book examines the nuanced properties of these fibers. Through its meticulous approach, it explores how banana fibers are fabricated into textiles and composites, revealing their significant contributions to sustainable materials development. Offering in-depth insights, the book bridges the gap between traditional fiber applications and modern technological advancements, aiming to inspire innovation in both academic research and industrial manufacturing.Additi... the book concludes with selected case studies that showcase the diverse applications of banana fiber-based composites, ranging from textiles to advanced engineering materials. It is an invaluable resource for researchers, materials scientists, industrial engineers, and manufacturers seeking to harness the potential of natural fibers. By providing a detailed analysis of design properties and end-use applications, the book stands as an essential guide for developing sustainable, high-performance composites in various industries.

  • Properties and Characterization of Nanocellulose and Nanocellulose-Based Composites

    • 1 Edición
    • Mohammad Jawaid + 2 más
    • Inglés
    Properties and Characterization of Nanocellulose and Nanocellulose-Based Composites delves into the intrinsic properties of nanocellulose and the resulting characteristics of nanocellulose-based composites. It covers mechanical, thermal, optical, and barrier properties, and discusses various characterization techniques. This book is part of a three-volume set that consolidates current knowledge, spanning processing, properties, and applications. Each volume focuses on a different aspect of nanocellulose research, offering comprehensive insights and methodologies. This volume serves as an essential reference for understanding structure-property relationships and the impact of processing on final properties.Researche... will gain valuable knowledge for tailoring nanocellulose-based composites by fine-tuning their properties through manipulation of parameters and processing conditions.

  • Composites and Biocomposites for Heavy Metal Adsorption

    • 1 Edición
    • Abdullahi Haruna Birniwa + 4 más
    • Inglés
    Composites and Biocomposites for Heavy Metal Adsorption delves into the latest advancements in this crucial area of research. With a focus on integrating materials like composites and bio-composites, the book demonstrates how these combinations can achieve superior heavy metal removal compared to single materials. This efficiency stems from their enhanced ability to eliminate hazardous intermediate metabolites present in heavy metals. Additionally, the book examines the application, mechanisms, and performance evaluation of various composites and bio-composites used in heavy metal removal. It also explores the techno-economic and lifecycle assessments of these materials, making it a valuable resource for scientists, engineers, and students alike.

  • Applications of Nanocellulose and Nanocellulose-Based Composites

    • 1 Edición
    • Mohammad Jawaid + 2 más
    • Inglés
    Applications of Nanocellulose and Nanocellulose-Based Composites is a three-volume set of titles that provides comprehensive information on the emerging field of nanocellulose and its application in composite materials. The handbook consolidates current knowledge, spanning the entire spectrum from processing, properties, and characterization right through to modern applications. Each volume is dedicated to a distinct aspect of nanocellulose research, offering in-depth insights, methodologies, and case studies. This volume will serve as an inspiration for researchers, engineers, and those working in industries to envision and create novel applications using nanocellulose-based materials.Sections provide insights into packaging, textiles, electronics, biomedical engineering, environmental remediation, and much more. Through case studies and practical examples, readers will discover how nanocellulose imparts unique properties into materials, enabling innovations and advancements in existing and emerging technologies.

  • Polymer and Biopolymer Nanocomposites

    Recent Advances and Applications
    • 1 Edición
    • Muhammad Moniruzzaman + 1 más
    • Inglés
    Polymer and Biopolymer Nanocomposites: Recent Advances and Applications delves into the fundamental principles of polymer and biopolymer nanocomposites while examining the latest technological advancements in their fabrication and characterization. The book brings together contributions from leading scientists and researchers worldwide, offering a comprehensive review of cutting-edge developments and techniques in this field. By covering a wide spectrum of current applications, the book aims to showcase the potential for future technological progress and commercialization. It emphasizes the diverse range of applications for polymer and biopolymer nanocomposites, demonstrating their significance in various industries.Finally, the book discusses innovative fabrication methods, advanced characterization techniques, and potential commercial uses. The insights provided aim to pave the way for new technological breakthroughs and enhanced industrial applications.

  • Smart Biocomposite Materials

    Fabrication, Applications and Sustainability
    • 1 Edición
    • Md Rezaur Rahman + 1 más
    • Inglés
    Smart Biocomposite Materials: Fabrication, Applications and Sustainability presents the latest advancements in this important research field. The book offers comprehensive insights into the classification, innovative fabrication techniques, and functional fillers of biocomposite materials. Additionally, it addresses mechanical performance, environmental impact, bio-sustainability, high-performance applications, and practical implementation. This resource is essential for professionals seeking to adopt sustainable materials in future research projects. Beyond the technical aspects, the book also examines ethical, cultural, and societal factors, providing a holistic view of biocomposite materials. It outlines key challenges and future directions while offering in-depth technical insights to aid informed decision-making.

  • Advances in Technical Nonwovens

    • 2 Edición
    • George Kellie
    • Inglés
    Advances in Technical Nonwovens, Second Edition provides an up-to-date accounting of the nonwoven industry's journey in a time of significant transformation. The book delves into the latest advancements in technology and showcases a wide array of innovative applications that have emerged in recent years. In summary, it offers an enriched and detailed exploration of nonwovens, introducing new chapters that cover Sustainable Developments, Nonwovens in Sports Apparel and Footwear, and Medical and Hygiene Nonwoven developments. With its extensive updates and comprehensive content, this edition is a must-have resource for anyone seeking to deepen their knowledge of the evolving world of nonwovens.Nonwovens, a versatile class of materials, have experienced continuous growth for over five decades, evolving from being predominantly used in hygiene products such as baby diapers, to becoming indispensable and technologically intricate components across various industries. Despite their modest nature, nonwovens play a crucial role in our daily lives.