Saltar al contenido principal
Elsevier

Libros en Ciencia de Materiales

  • Natural Fiber-Reinforced Biodegradable and Bioresorbable Polymer Composites

    • 1 Edición
    • Alan Kin-tak Lau + 1 más
    • Inglés
    Natural Fiber-Reinforced Biodegradable and Bioresorbable Polymer Composites focuses on key areas of fundamental research and applications of biocomposites. Several key elements that affect the usage of these composites in real-life applications are discussed. There will be a comprehensive review on the different kinds of biocomposites at the beginning of the book, then the different types of natural fibers, bio-polymers, and green nanoparticle biocomposites are discussed as well as their potential for future development and use in engineering biomedical and domestic products. Recently mankind has realized that unless the environment is protected, he himself will be threatened by the over consumption of natural resources as well as a substantial reduction in the amount of fresh air produced in the world. Conservation of forests and the optimal utilization of agricultural and other renewable resources like solar, wind, and tidal energy, have become important topics worldwide. With such concern, the use of renewable resources—such as plant and animal-based, fiber-reinforced polymeric composites—are now becoming an important design criterion for designing and manufacturing components for a broad range of different industrial products. Research on biodegradable polymeric composites can contribute, to some extent, to a much greener and safer environment. For example, in the biomedical and bioengineering fields, the use of natural fiber mixed with biodegradable and bioresorbable polymers can produce joint and bone fixtures to alleviate pain in patients.

  • Nanostructures for Novel Therapy

    Synthesis, Characterization and Applications
    • 1 Edición
    • Denisa Ficai + 1 más
    • Inglés
    Nanostructures for Novel Therapy: Synthesis, Characterization and Applications focuses on the fabrication and characterization of therapeutic nanostructures, in particular, synthesis, design, and in vitro and in vivo therapeutic evaluation. The chapters provide a cogent overview of recent therapeutic applications of nanostructured materials that includes applications of nanostructured materials for wound healing in plastic surgery and stem cell therapy. The book explores the promise for more effective therapy through the use of nanostructured materials, while also assessing the challenges their use might pose from both an economic and medicinal point of view. This innovative look at how nanostructured materials are used in therapeutics will be of great benefit to researchers, providing a greater understanding of the different ways nanomaterials could improve medical treatment, along with a discussion of the obstacles that need to be overcome in order to guarantee widespread availability.

  • Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP)

    Design, Construction and Practical Applications
    • 1 Edición
    • Hwai-Chung Wu + 1 más
    • Inglés
    Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP): Design, Construction and Practical Applications presents a best practice guide on the structural design and strengthening of bridge structures using advanced Fiber Reinforced Polymer (FRP) composites. The book briefly covers the basic concepts of FRP materials and composite mechanics, while focusing on practical design and construction issues, including inspection and quality control, paying special attention to the differences in various design codes (US, Japan, and Europe) and recommendations. At present, several design guides from the US, Japan, and Europe are available. These guidelines are often inconsistent and do not cover all necessary design and inspection issues to the same degree of detail. This book provides a critical review and comparison of these guidelines, and then puts forward best practice recommendations, filling a significant gap in the literature, and serving as an important resource for engineers, architects, academics, and students interested in FRP materials and their structural applications. Written from a practitioner's point-of-view, it is a valuable design book for structural engineers all over the world.

  • Plastics in Medical Devices for Cardiovascular Applications

    • 1 Edición
    • Ajay Padsalgikar
    • Inglés
    Plastics in Medical Devices for Cardiovascular Applications enables designers of new cardiovascular medical devices to make decisions about the kind of plastics that can go into the manufacture of their device by explaining the property requirements of various applications in this area, including artificial valves, lead insulation, balloons, vascular grafts, and more.

  • Computer Aided Innovation of New Materials II

    Proceedings of the Second International Conference and Exhibition on Computer Applications to Materials and Molecular Science and Engineering - CAMSE '92, Pacifico Yokohama, Yokohama, Japan, September 22-25, 1992
    • 1 Edición
    • M. Doyama + 3 más
    • Inglés
    With advanced materials being in the midst of a widely acknowledged revolution, there is relentless pressure on scientists and engineers to be on the cutting edge of emerging theories and design methodologies. The 379 papers in this two part volume bring together the experience of specialists in the entire field of applications of Materials Science. This multidisciplinary meeting was held to bring together workers in a wide range of materials science and engineering activities who employ common analytical and experimental methods in their day to day work. The results of the meeting are of worldwide interest, and will help to stimulate future research and analysis in this area.

  • Green Composites

    Waste and Nature-based Materials for a Sustainable Future
    • 2 Edición
    • Caroline Baillie + 1 más
    • Inglés
    Green Composites: Waste-based Materials for a Sustainable Future, Second Edition presents exciting new developments on waste-based composites. New, additional, or replacement chapters focus on these elements, reflecting on developments over the past ten years. Authors of existing chapters have brought these themes into their work wherever possible, and case study chapters that connect materials engineering to the topic's social context are included in this revised edition. Professor Baillie believes that the new ‘green’ is the "what and who" composites are being designed for, "what" material needs we have, and "what" access different groups have to the technical knowledge required, etc. Industry is now showing concerns for corporate social responsibility and social impact. Recent conversations with prestigious materials institutions have indicated a growing interest in moving into areas of research that relate their work to beneficial social impacts. The book's example of Waste for Life demonstrates the genre proposed for the case study chapters. Waste for Life adopts scientific knowledge and low-threshold/high-i... technologies.

  • X-Ray Diffraction Studies on the Deformation and Fracture of Solids

    • 1 Edición
    • Kazuyoshi Tanaka + 2 más
    • Inglés
    This volume covers current research findings and engineering applications of X–ray methods by the Japanese X–ray group members. The first part of the volume deals with fundamental problems in the methods for X–ray stress measurement. Phase stresses in the constituent phases of ceramic composites and ceramic-fiber reinforced metal-matrix composites are separately measured by X–rays, while three-dimensional stresses and thermal stresses in composites measured by X–rays are compared with the theoretical and numerical analyses. This work will therfore provide significant information for designing high-performance composites. Other topics covered include synchrotron X–ray radiation and the analysis of X–ray data by the Guassian curve method.Part two is devoted to the application of X–ray diffraction methods for various engineering purposes, the residual stress and half-value breadth (the full width at half the maximum) of the diffraction profiles being the two main X–ray parameters utilized in those applications. Chapters are included on X–ray fractography, a powerful technique for failure analysis, which is applied to the brittle fracture of ceramics and to the fatigue fracture of steels under various service conditions.

  • Steels: Microstructure and Properties

    • 4 Edición
    • H.K.D.H. Bhadeshia + 1 más
    • Inglés
    Steels: Structure and Properties, Fourth Edition is an essential text and reference, providing indispensable foundational content for researchers, metallurgists, and engineers in industry and academia. The book provides inspiring content for undergraduates, yet has a depth that makes it useful to researchers. Steels represent the most used metallic material, possessing a wide range of structures and properties. By examining the properties of steels in conjunction with structure, this book provides a valuable description of the development and behavior of these materials—the very foundation of their widespread use. The new edition has been thoroughly updated, with expanded content and improved organization, yet it retains its clear writing style, extensive bibliographies, and real-life examples.

  • Biomechanics of Tendons and Ligaments

    Tissue Reconstruction and Regeneration
    • 1 Edición
    • Johanna Buschmann + 1 más
    • Inglés
    Biomechanics of Tendons and Ligaments: Tissue Reconstruction looks at the structure and function of tendons and ligaments. Biological and synthetic biomaterials for their reconstruction and regeneration are reviewed, and their biomechanical performance is discussed. Regeneration tendons and ligaments are soft connective tissues which are essential for the biomechanical function of the skeletal system. These tissues are often prone to injuries which can range from repetition and overuse, to tears and ruptures. Understanding the biomechanical properties of ligaments and tendons is essential for their repair and regeneration.

  • Modelling and Mechanics of Carbon-based Nanostructured Materials

    • 1 Edición
    • Duangkamon Baowan + 4 más
    • Inglés
    Modelling and Mechanics of Carbon-based Nanostructured Materials sets out the principles of applied mathematical modeling in the topical area of nanotechnology. It is purposely designed to be self-contained, giving readers all the necessary modeling principles required for working with nanostructures. The unique physical properties observed at the nanoscale are often counterintuitive, sometimes astounding researchers and thus driving numerous investigations into their special properties and potential applications. Typically, existing research has been conducted through experimental studies and molecular dynamics simulations. This book goes beyond that to provide new avenues for study and review.

  • Advanced and Emerging Polybenzoxazine Science and Technology

    • 1 Edición
    • Hatsuo Ishida + 1 más
    • Inglés
    Advanced and Emerging Polybenzoxazine Science and Technology introduces advanced topics of benzoxazine resins and polybenzoxazines as presented through the collaboration of leading experts in the benzoxazine community, representing the authoritative introduction to the subjects. Broad topics covered include the recent development and improved understanding of the subjects, including low temperature cure, aerogels and carbon aerogels, smart chemistry in fire retarding materials and coatings, metal containing benzoxazines, rational design of advanced properties, and materials from natural renew. In the past twenty years, the number of papers on polybenzoxazine has continuously increased at an exponential rate. During the past three years, the number of papers published is more than the previous 17 years combined. The material is now part of only a few successfully commercialized polymers in the past 35 years. Therefore, interest in this material in both academia and industry is very strong.

  • Plasma Etching Processes for CMOS Devices Realization

    • 1 Edición
    • Nicolas Posseme
    • Inglés
    Plasma etching has long enabled the perpetuation of Moore's Law. Today, etch compensation helps to create devices that are smaller than 20 nm. But, with the constant downscaling in device dimensions and the emergence of complex 3D structures (like FinFet, Nanowire and stacked nanowire at longer term) and sub 20 nm devices, plasma etching requirements have become more and more stringent.Now more than ever, plasma etch technology is used to push the limits of semiconductor device fabrication into the nanoelectronics age. This will require improvement in plasma technology (plasma sources, chamber design, etc.), new chemistries (etch gases, flows, interactions with substrates, etc.) as well as a compatibility with new patterning techniques such as multiple patterning, EUV lithography, Direct Self Assembly, ebeam lithography or nanoimprint lithography.This book presents these etch challenges and associated solutions encountered throughout the years for transistor realization.

  • Handbook of Plasticizers

    • 3 Edición
    • George Wypych
    • Inglés
    Handbook of Plasticizers, Third Edition, is an essential professional reference, providing information that enables R&D scientists, production chemists, and engineers the information they need to use plasticizers more effectively, and to avoid certain plasticizers in applications where they may cause health or material durability problems. Plasticizers are vital to the plastics industry, particularly in improving the properties of materials such as PVC. Plasticizers are commonly added to complex mixtures containing a variety of materials, so successful incorporation requires a broad understanding of the mechanisms of plasticizer action, and compatibility with different materials and blends. There is a large selection of commercial plasticizers, and various environmental issues which impact on selection decisions. The book discusses new and historical approaches to the use of plasticizers, explaining mechanisms of plasticizers' action and their behavior in plasticized systems. It goes into detail on the use of plasticizers in a range of specific polymers, polymer blends, and other industrial products. This includes coverage of the impact of plasticizers on processing. George Wypych provides the data and know-how from the most recent sources and updated information required by engineers and scientists working in the plastics industry and the many industry sectors that use plastics in their products. The book covers the uses, advantages, and disadvantages of plasticizers, historical and theoretical background, their effects on process conditions, and health, safety, and environmental issues.

  • Rheology

    Concepts, Methods, and Applications
    • 3 Edición
    • Alexander Y. Malkin + 1 más
    • Inglés
    Rheology: Concepts, Methods and Applications, Third Edition provides a thorough historical and theoretical grounding in the field, and introduces rheology as the method of solving many practical problems in materials science and engineering. The book is practical and relevant for industry, but is also consistent with rheology courses in academia, making it relevant to both academics and accomplished rheologists in industry. The first four chapters discuss various aspects of theoretical rheology and, through examples from numerous studies, show how particular theories, models, or equations can be used in solving different problems. The shared experience and insight contained in these chapters assists practitioners carrying out rheological studies in generating relevant data. This helps to avert costly errors in analysis which are common when data are generated under the wrong conditions, or are incorrectly used. The fifth chapter covers methods of measurement and treatment of raw data—eight groups of methods are discussed in this chapter, providing the reader with many options for experimentation, along with guidance on where and how to use them properly. The final chapter demonstrates how to use rheological methods for different groups of products and manufacturing methods. The usefulness of chemorheological (rheokinetical) measurements is also emphasized. The chapter has a particular emphasis on real-world applications of rheology, and gives practical guidance to enable materials scientists to gather data and solve problems using these methods. This book is a systematic presentation of the subject of rheology—written by two of the foremost researchers in the field—showing the subject as an interrelated system of concepts, principal phenomena, experimental methods, and directions of their application. It also links with other branches of theoretical and applied sciences.

  • Materials Under Extreme Conditions

    Recent Trends and Future Prospects
    • 1 Edición
    • A. K. Tyagi + 1 más
    • Inglés
    Materials Under Extreme Conditions: Recent Trends and Future Prospects analyzes the chemical transformation and decomposition of materials exposed to extreme conditions, such as high temperature, high pressure, hostile chemical environments, high radiation fields, high vacuum, high magnetic and electric fields, wear and abrasion related to chemical bonding, special crystallographic features, and microstructures. The materials covered in this work encompass oxides, non-oxides, alloys and intermetallics, glasses, and carbon-based materials. The book is written for researchers in academia and industry, and technologists in chemical engineering, materials chemistry, chemistry, and condensed matter physics.

  • Handbook of Foaming and Blowing Agents

    • 1 Edición
    • George Wypych
    • Inglés
    Handbook of Foaming and Blowing Agents provides useful guidance to assist practitioners in the more efficient and effective selection of foaming methods and blowing agents. The book focuses on the selection of additives for a diverse range of foaming processes, which can be enhanced using modern chemical means to improve product quality, speed up the process, and broaden the range of products that can be produced using foaming technology. Foamed polymers have many beneficial properties, including lower density, high heat and sound insulation, and shock absorbency. Foamed plastic parts are now a ubiquitous part of everyday life—from food packaging to seat cushions. As the application of foamed polymers expands and diversifies, a variety of foaming techniques and equipment are available to produce very diverse range of products. Foaming methods are generally established, but very little is known about the composition of materials to be processed and the additives to enhance foam products or make the foam production more economical. The book introduces useful analytical techniques for foaming, and thoroughly discusses the environmental impact of foaming processes.

  • Databook of Plasticizers

    • 2 Edición
    • Anna Wypych
    • Inglés
    Databook of Plasticizers, Second Edition, contains data on the most important plasticizers in use today, including over 375 generic and commercial plasticizers. The data comes from a range of sources beyond plasticizers' manufacturers, allowing for a detailed comparison of properties between different plasticizers. Over 100 different data fields are provided, from general information, such as molecular structure and formula, to physical properties, health and safety information, ecological properties, and recommendations regarding appropriate use and performance of each plasticizer. The databook is an essential resource for engineers, technicians, and materials scientists responsible for specifying a plasticizer. It provides trustworthy and up-to-date data that is applicable to a range of numerous application areas, such as construction, automotives, food packaging, and more.

  • Databook of Blowing and Auxiliary Agents

    • 1 Edición
    • George Wypych
    • Inglés
    Databook of Blowing and Auxiliary Agents examines the chemical compounds used in the manufacture of blowing and auxiliary agents, and commercial products, with a range of data sources utilized. Foamed polymers have many beneficial properties, including lower density, high heat and sound insulation, and shock absorbency. Foamed plastic parts are now a ubiquitous part of everyday life—from food packaging to seat cushions. As the application of foamed polymers expands and diversifies, a variety of foaming techniques and equipment are available to produce a diverse range of products. The methods of foaming are generally established, but very little is known about the composition of materials to be processed and additives to enhance foam products and make foam production more economical. Over 100 different data fields are provided, from general information such as molecular structure and formula, to physical properties, health and safety information, ecological properties, and recommendations regarding appropriate use and performance of each agent. This databook is an essential resource for engineers, technicians, and materials scientists who need to specify blowing or auxiliary agents. It provides trustworthy and up-to-date data applicable to a range of industries such as construction, automotive, food packaging, and more.

  • Atlas of Material Damage

    • 2 Edición
    • George Wypych
    • Inglés
    Atlas of Material Damage, Second Edition provides a systematic analysis of the modes of damage and morphology of damaged material, and compares the experiences of different industries to provide insight into the most frequently encountered failures, reasons for these failures, and potential improvements to prevent future materials failure. Product reliability is a critical aim of materials scientists and engineers. Uninterrupted performance of manufactured products at typical and extreme conditions of use is the major goal of product development and the most important indicator of material quality. This atlas has microscopic pictures, schematic diagrams, and graphs which show how materials fail, how they are produced to not fail, and how they are designed to perform particular functions to make outstanding products. Findings presented by each illustration are fully explained in the text and labeled. Materials increasingly must have optimal structure and specially designed morphology. The book offers numerous examples of how this special morphology can be achieved in electronics, the plastics industry, the pharmaceutical industry, aerospace, automotive applications, medicine, dentistry, and many other fields. This book provides information on defect formation and materials damage; discusses effect of composition, morphological features and structure of different materials on material performance, durability, and resilience; and analyses the cause of material damage and degradation, and the effect of processing conditions on material damage.

  • Handbook of Odors in Plastic Materials

    • 2 Edición
    • George Wypych
    • Inglés
    Handbook of Odors in Plastic Materials, Second Edition, analyzes the reasons behind unwanted odor formation and the methods for preventing it. The book covers the fundamentals of odor formation and its transport within a material, the relationship between odor and toxicity, and seventeen methods of odor removal. Odor can play a significant role in the success of a product; it can decide whether a customer purchases the product in the first place, or can be the cause of complaints or returns. Similarly, in scented products, the retention of volatile components is a particular challenge and opportunity. There are several factors which have an impact on the formation of odors in plastic materials, including the properties of the polymer, use of additives in processing, exposure to radiation and oxygen, storage, and recycling. Thirty-seven polymers and forty-one critical product groups are analyzed based on the latest research publications and patents. The book also discusses regulations related to odor in products, effects of odor on health and safety, and the effect of odors from plastic materials on indoor air quality.

  • Nanotechnology and Functional Materials for Engineers

    • 1 Edición
    • Yaser Dahman
    • Inglés
    Nanotechnology and Functional Materials for Engineers focuses on key essentials and examples across the spectrum of nanomaterials as applied by engineers, including nanosensors, smart nanomaterials, nanopolymers, and nanotubes. Chapters cover their synthesis and characteristics, production methods, and applications, with specific sections exploring nanoelectronics and electro-optic nanotechnology, nanostructures, and nanodevices. This book is a valuable resource for interdisciplinary researchers who want to learn more about how nanomaterials are used in different types of engineering, including electrical, chemical, and biomedical.

  • Nanoscience and its Applications

    • 1 Edición
    • Osvaldo de Oliveira Jr + 3 más
    • Inglés
    Nanoscience and Its Applications explores how nanoscience is used in modern industry to increase product performance, including an understanding of how these materials and systems, at the molecular level, provide novel properties and physical, chemical, and biological phenomena that have been successfully used in innovative ways in a wide range of industries. This book is an important reference source for early-career researchers and practicing materials scientists and engineers seeking a greater understanding on how nanoscience can be used in modern industries.

  • Mechanical Behaviors of Carbon Nanotubes

    Theoretical and Numerical Approaches
    • 1 Edición
    • K.M. Liew + 2 más
    • Inglés
    Mechanical Behaviors of Carbon Nanotubes: Theoretical and Numerical Approaches presents various theoretical and numerical studies on mechanical behaviors of carbon nanotubes. The main theoretical aspects included in the book contain classical molecular dynamics simulation, atomistic-continuum theory, atomic finite element method, continuum plate, nonlocal continuum plate, and shell models. Detailed coverage is also given to structural and elastic properties, trace of large deformation, buckling and post-buckling behaviors, fracture, vibration characteristics, wave propagation, and the most promising engineering applications. This book not only illustrates the theoretical and numerical methods for analyzing the mechanical behavior of carbon nanotubes, but also contains computational results from experiments that have already taken place.

  • Graphitic Nanofibers

    A Review of Practical and Potential Applications
    • 1 Edición
    • Juzer Jangbarwala
    • Inglés
    The world of nanomaterials is complex; there is dubiety as well as unrealistic optimism about costs, practicality, timing for the availability of, and the true capabilities of products featured in the news. The progress of the industry is being affected from the incertitude generated by the multitudinous names used, coupled with lack of clarity and standardization in the definitions for carbonaceous nanomaterials, such as graphene, graphene oxide, nanographene, nanographene flakes, nanographite flakes, graphene nanoribbons, single-layer graphene, few-layer graphene, nanographite, nanotubes, nanofibers. In this perspicuous book about the carbonaceous nanomaterial domain, the author concisely covers nomenclature, characteristics, applications, costs, and manufacturing; all with the cardinal goal to offer the reader a reality check by delineating the steps to commercialization. Along the way, he also examines the cost impact of the touted applications and the boundaries of market adoption. Through references and personal experience, the author makes a compelling case for the market readiness of a mostly neglected class of nanomaterials known as Graphitic Nanofibers. Includes varied levels of technical focus and financial analyses to appeal to a range of skills and interests.

  • Microfluidics: Modeling, Mechanics and Mathematics

    • 1 Edición
    • Bastian E. Rapp
    • Inglés
    This practical, lab-based approach to nano- and microfluidics provides readers with a wealth of practical techniques, protocols, and experiments ready to be put into practice in both research and industrial settings. The practical approach is ideally suited to researchers and R&D staff in industry; additionally the interdisciplinary approach to the science of nano- and microfluidics enables readers from a range of different academic disciplines to broaden their understanding. Dr Rapp fully engages with the multidisciplinary nature of the subject. Alongside traditional fluid/transport topics, there is a wealth of coverage of materials and manufacturing techniques, chemical modification/surface functionalization, biochemical analysis, and the biosensors involved. As well as providing a clear and concise overview to get started into the multidisciplinary field of microfluidics and practical guidance on techniques, pitfalls and troubleshooting, this book supplies: A set of hands-on experiments and protocols that will help setting up lab experiments but which will also allow a quick start into practical work. A collection of microfluidic structures, with 3D-CAD and image data that can be used directly (files provided on a companion website).

  • Automotive Steels

    Design, Metallurgy, Processing and Applications
    • 1 Edición
    • Radhakanta Rana + 1 más
    • Inglés
    Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials.

  • Thermal Stress Analysis of Composite Beams, Plates and Shells

    Computational Modelling and Applications
    • 1 Edición
    • Erasmo Carrera + 1 más
    • Inglés
    Thermal Stress Analysis of Composite Beams, Plates and Shells: Computational Modelling and Applications presents classic and advanced thermal stress topics in a cutting-edge review of this critical area, tackling subjects that have little coverage in existing resources. It includes discussions of complex problems, such as multi-layered cases using modern advanced computational and vibrational methods. Authors Carrera and Fazzolari begin with a review of the fundamentals of thermoelasticity and thermal stress analysis relating to advanced structures and the basic mechanics of beams, plates, and shells, making the book a self-contained reference. More challenging topics are then addressed, including anisotropic thermal stress structures, static and dynamic responses of coupled and uncoupled thermoelastic problems, thermal buckling, and post-buckling behavior of thermally loaded structures, and thermal effects on panel flutter phenomena, amongst others.

  • Quality Management in Plastics Processing

    • 1 Edición
    • Robin Kent
    • Inglés
    Quality Management in Plastics Processing provides a structured approach to the techniques of quality management, also covering topics of relevance to plastics processors. The book’s focus isn’t just on implementation of formal quality systems, such as ISO 9001, but about real world, practical guidance in establishing good quality management. Ultimately, improved quality management delivers better products, higher customer satisfaction, increased sales, and reduced operation costs. The book helps practitioners who are wondering how to begin implementing quality management techniques in their business focus on key management and technical issues, including raw materials, processing, and operations. It is a roadmap for all company operations, from people, product design, sales/marketing, and production – all of which are impacted by, and involved in, the implementation of an effective quality management system. Readers in the plastics processing industry will find this comprehensive book to be a valuable resource.

  • Industrial Applications of Renewable Plastics

    Environmental, Technological, and Economic Advances
    • 1 Edición
    • Michel Biron
    • Inglés
    Industrial Applications of Renewable Plastics: Environmental, Technological, and Economic Advances provides practical information to help engineers and materials scientists deploy renewable plastics in the plastics market. It explores the uses, possibilities, and problems of renewable plastics and composites to assist in material selection and rejection. The designer’s main problems are examined, along with basic reminders that deal with structures and processing methods that can help those who are generally familiar with metals understand the unique properties of plastic materials. The book offers a candid overview of main issues, including conservation of fossil resources, geopolitical considerations, greenhouse effects, competition with food crops, deforestation, pollution, and disposal of renewable plastics. In addition, an overview of some tools related to sustainability (Life cycle assessments, CO2 emissions, carbon footprint, and more) is provided. The book is an essential resource for engineers and materials scientists involved in material selection, design, manufacturing, molding, fabrication, and other links in the supply chain of plastics. The material contained is of great relevance to many major industries, including automotive and transport, packaging, aeronautics, shipbuilding, industrial and military equipment, electrical and electronics, energy, and more.

  • Materials and Processes for Next Generation Lithography

    • 1 Edición
    • Volumen 11
    • Inglés
    As the requirements of the semiconductor industry have become more demanding in terms of resolution and speed it has been necessary to push photoresist materials far beyond the capabilities previously envisioned. Currently there is significant worldwide research effort in to so called Next Generation Lithography techniques such as EUV lithography and multibeam electron beam lithography. These developments in both the industrial and the academic lithography arenas have led to the proliferation of numerous novel approaches to resist chemistry and ingenious extensions of traditional photopolymers. Currently most texts in this area focus on either lithography with perhaps one or two chapters on resists, or on traditional resist materials with relatively little consideration of new approaches. This book therefore aims to bring together the worlds foremost resist development scientists from the various community to produce in one place a definitive description of the many approaches to lithography fabrication.

  • Carbon Composites

    Composites with Carbon Fibers, Nanofibers, and Nanotubes
    • 2 Edición
    • Deborah D.L. Chung
    • Inglés
    Carbon Composites: Composites with Carbon Fibers, Nanofibers, and Nanotubes, Second Edition, provides the reader with information on a wide range of carbon fiber composites, including polymer-matrix, metal-matrix, carbon-matrix, ceramic-matrix and cement-matrix composites. In contrast to other books on composites, this work emphasizes materials rather than mechanics. This emphasis reflects the key role of materials science and engineering in the development of composite materials. The applications focus of the book covers both the developing range of structural applications for carbon fiber composites, including military and civil aircraft, automobiles and construction, and non-structural applications, including electromagnetic shielding, sensing/monitoring, vibration damping, energy storage, energy generation, and deicing. In addition to these new application areas, new material in this updated edition includes coverage of cement-matrix composites, carbon nanofibers, carbon matrix precursors, fiber surface treatment, nanocarbons, and hierarchical composites. An ideal source of information for senior undergraduate students, graduate students, and professionals working with composite materials and carbon fibers, this book can be used both as a reference book and as a textbook.

  • Materials and Devices for Bone Disorders

    • 1 Edición
    • Susmita Bose + 1 más
    • Inglés
    Materials for Bone Disorders is written by a cross-disciplinary team of research scientists, engineers, and clinicians and bridges the gap between materials science and bone disorders, providing integrated coverage of biomaterials and their applications. The bioceramics, biopolymers, composites, and metallic materials used in the treatment of bone disorders are introduced, as are their interactions with cells, biomolecules, and body tissues. The main types of bone disorder and disease are covered including osteoporosis, spinal injury, load bearing joint diseases, bone cancer, and forms of cranio-maxillofacial disorders. Bone disorders are common across all ages. Various forms of bone disorders can change the lifestyle of otherwise normal and healthy people. With the development of novel materials, many forms of bone disorders are becoming manageable, allowing people to lead a fairly normal life. Specific consideration is given to areas where recent advances are enabling new treatments, such as the use of resorbable ceramics in bone tissue engineering and drug delivery, newer polymer-based implants in load-bearing contexts, and engineering biomaterials surfaces including modifying surface chemistry. Ethical and regulatory issues are also explored.

  • High Tc Superconductors

    Electronic Structure
    • 1 Edición
    • A. Bianconi + 1 más
    • Inglés
    There are many theories at present which attempt to explain the property of high-temperature superconductivity in the new breed of superconducting ceramics - however, the electronic structure of these materials is not yet fully understood. The 29 papers in this work present the results from the use of a wide range of spectroscopic techniques, such as Raman, nuclear magnetic resonance and photoemission, in investigating the electronic structure of the new cuprate perovskites.

  • Bone Response to Dental Implant Materials

    • 1 Edición
    • Adriano Piattelli
    • Inglés
    Bone Response to Dental Implant Materials examines the oral environment and the challenges associated with dental biomaterials. Understanding different in vivo and in vitro responses is essential for engineers to successfully design and tailor implant materials which will withstand the different challenges of this unique environment. This comprehensive book reviews the fundamentals of bone responses in a variety of implant materials and presents strategies to tailor and control them.

  • Progress in Rubber Nanocomposites

    • 1 Edición
    • Sabu Thomas + 1 más
    • Inglés
    Progress in Rubber Nanocomposites provides an up-to-date review on the latest advances and developments in the field of rubber nanocomposites. It is intended to serve as a one-stop reference resource to showcase important research accomplishments in the area of rubber nanocomposites, with particular emphasis on the use of nanofillers. Chapters discuss major progress in the field and provide scope for further developments that will have an impact in the industrial research area. Global leaders and researchers from industry, academia, government, and private research institutions contribute valuable information.

  • Biofilms and Implantable Medical Devices

    Infection and Control
    • 1 Edición
    • Ying Deng + 1 más
    • Inglés
    Biofilms and Implantable Medical Devices: Infection and Control explores the increasing use of permanent and semi-permanent implants and indwelling medical devices. As an understanding of the growth and impact of biofilm formation on these medical devices and biomaterials is vital for protecting the health of the human host, this book provides readers with a comprehensive treatise on biofilms and their relationship with medical devices, also reporting on infections and associated strategies for prevention.

  • Nanostructures

    • 1 Edición
    • Osvaldo de Oliveira Jr + 3 más
    • Inglés
    Nanostructures covers the main concepts and fundamentals of nanoscience emphasizing characteristics and properties of numerous nanostructures. This book offers a clear explanation of nanostructured materials via several examples of synthesis/processing methodologies and materials characterization. In particular, this book is targeted to a range of scientific backgrounds, with some chapters written at an introductory level and others with the in-depth coverage required for a seasoned professional. Nanostructures is an important reference source for early-career researchers and practicing materials scientists and engineers seeking a focused overview of the science of nanostructures and nanostructured systems, and their industrial applications.

  • The Material Point Method

    A Continuum-Based Particle Method for Extreme Loading Cases
    • 1 Edición
    • Xiong Zhang + 2 más
    • Inglés
    The Material Point Method: A Continuum-Based Particle Method for Extreme Loading Cases systematically introduces the theory, code design, and application of the material point method, covering subjects such as the spatial and temporal discretization of MPM, frequently-used strength models and equations of state of materials, contact algorithms in MPM, adaptive MPM, the hybrid/coupled material point finite element method, object-oriented programming of MPM, and the application of MPM in impact, explosion, and metal forming. Recent progresses are also stated in this monograph, including improvement of efficiency, memory storage, coupling/combination with the finite element method, the contact algorithm, and their application to problems.

  • Nanotechnology in Cancer

    • 1 Edición
    • Anshu Mathur
    • Inglés
    Nanotechnology in Cancer covers current nanotechnology-based nanotherapeutics involving gold nanoparticles, colloids, gels, magnetic nanoparticles, radiofrequency, gene therapy, biological particles, and the intermolecular interactions associated with nanoparticle based cancer therapy in vivo. Different cancer types and locations are considered alongside the corresponding treatment types, and the use of imaging technologies and animal models are also explored. Both scientific and clinical aspects are considered by authors coming from both fields, with the authors using their backgrounds from different disciplines to make the connection between cancer and effective drug delivery and therapeutic strategies.

  • Biocompatibility of Dental Biomaterials

    • 1 Edición
    • Richard Shelton
    • Inglés
    Biocompatibility of Dental Biomaterials details and examines the fundamentals of biocompatibililty, also including strategies to combat it. As biomaterials used in the mouth are subject to different problems than those associated with the general in vivo environment, this book examines these challenges, presenting the latest research and forward-thinking strategies.

  • Permeability Properties of Plastics and Elastomers

    • 4 Edición
    • Laurence W. McKeen
    • Inglés
    Permeability Properties of Plastics and Elastomers, Fourth Edition provides a comprehensive collection of graphical multipoint and tabular data covering the permeation of liquids, vapors, and gases through plastic or polymeric materials, such as films, membranes, and containers. This updated edition includes an entirely new chapter on sustainable and biodegradable polymers and an extensive introductory section covering fatigue, what it is, how it is measured, and the fundamentals of permeation and permeability properties. Foundational information is also provided on the production of films, containers, membranes, and the markets and applications for these materials.

  • Industrial Applications of Carbon Nanotubes

    • 1 Edición
    • Huisheng Peng + 2 más
    • Inglés
    Industrial Applications of Carbon Nanotubes covers the current applications of carbon nanotubes in various industry sectors, from the military to visual display products, and energy harvesting and storage. It also assesses the opportunities and challenges for increased commercialization and manufacturing of carbon nanotubes in the years ahead. Real-life case studies illustrate how carbon nanotubes are used in each industry sector covered, providing a valuable resource for scientists and engineers who are involved and/or interested in carbon nanotubes in both academia and industry. The book serves as a comprehensive guide to the varied uses of carbon nanotubes for specialists in many related fields, including chemistry, physics, biology, and textiles.

  • Supra-materials Nanoarchitectonics

    • 1 Edición
    • Katsuhiko Ariga + 1 más
    • Inglés
    Supra-materials Nanoarchitectonics provides the latest information on design at the nanoscale, presenting a range of the new challenges that arise as the manipulation techniques that work at the macro- and micro-scale do not work at the nanoscale. The term nanoarchitectonics, coined by Japan's National Institute for Materials Science (NIMS), describes the organized interactions required at the nanoscale, replacing the traditional structure-building approach used in materials design. Nanoarchitectonics approaches material design via a profound understanding of the interactions between individual nanostructures and their organization. As the nanoarchitectonics paradigm fits well with the discipline of supramolecular chemistry, this book brings together these two approaches to demonstrate the potential of supramolecular nanoarchitectonics in the development of new materials, both at the nano- and macro-scale.

  • Brydson's Plastics Materials

    • 8 Edición
    • Marianne Gilbert
    • Inglés
    Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field.

  • Bioinspired Materials for Medical Applications

    • 1 Edición
    • Lígia Rodrigues + 1 más
    • Inglés
    Bioinspired Materials for Medical Applications examines the inspiration of natural materials and their interpretation as modern biomaterials. With a strong focus on therapeutic and diagnostic applications, the book also examines the development and manipulation of bioinspired materials in regenerative medicine. The first set of chapters is heavily focused on bioinspired solutions for the delivery of drugs and therapeutics that also offer information on the fundamentals of these materials. Chapters in part two concentrate on bioinspired materials for diagnosis applications with a wide coverage of sensor and imaging systems With a broad coverage of the applications of bioinspired biomaterials, this book is a valuable resource for biomaterials researchers, clinicians, and scientists in academia and industry, and all those who wish to broaden their knowledge in the allied field.

  • Chitosan Based Biomaterials Volume 2

    Tissue Engineering and Therapeutics
    • 1 Edición
    • Jessica Amber Jennings + 1 más
    • Inglés
    Chitosan Based Biomaterials: Tissue Engineering and Therapeutics, Volume 2, provides the latest information on chitosan, a natural polymer derived from the marine material chitin. Chitosan displays unique properties, most notably biocompatibility and biodegradability. It can also be easily tuned to modify its structure or properties, making chitosan an excellent candidate as a biomaterial. Consequently, chitosan is being developed for many biomedical functions, ranging from tissue engineering and implant coatings to drug and gene delivery. This book provides readers with a full coverage of the applications of chitosan-based biomaterials.

  • Chitosan Based Biomaterials Volume 1

    Fundamentals
    • 1 Edición
    • Jessica Amber Jennings + 1 más
    • Inglés
    Chitosan Based Biomaterials: Fundamentals, Volume 1, provides the latest information on chitosan, a natural polymer derived from the marine material chitin. Chitosan displays unique properties, most notably biocompatibility and biodegradability. It can also be easily tuned to modify its structure or properties, making chitosan an excellent candidate as a biomaterial. Consequently, chitosan is being developed for many biomedical functions, ranging from tissue engineering and implant coatings to drug and gene delivery. This book looks at the fundamentals of chitosan-based biomaterials.

  • Science and Principles of Biodegradable and Bioresorbable Medical Polymers

    Materials and Properties
    • 1 Edición
    • Xiang Cheng Zhang
    • Inglés
    Science and Principles of Biodegradable and Bioresorbable Medical Polymers: Materials and Properties provides a practical guide to the use of biodegradable and bioresorbable polymers for study, research, and applications within medicine. Fundamentals of the basic principles and science behind the use of biodegradable polymers in advanced research and in medical and pharmaceutical applications are presented, as are important new concepts and principles covering materials, properties, and computer modeling, providing the reader with useful tools that will aid their own research, product design, and development. Supported by practical application examples, the scope and contents of the book provide researchers with an important reference and knowledge-based educational and training aid on the basics and fundamentals of these important medical polymers.

  • The Science of Armour Materials

    • 1 Edición
    • Ian Crouch
    • Inglés
    The Science of Armour Materials comprehensively covers the range of armor materials from steels and light alloys, through glasses and ceramics, to fibers, textiles, and protective apparel. The book also discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies. Each chapter is written from an international perspective, including reviews of the current global literature, and incorporates case studies that focus upon real life applications, research outcomes, and lessons learned. The threat spectrum is restricted to small arms ammunition, high velocity fragments, and stab and spike attacks, as well as blast loadings.

  • Expanded PTFE Applications Handbook

    Technology, Manufacturing and Applications
    • 1 Edición
    • Sina Ebnesajjad
    • Inglés
    Expanded PTFE Applications Handbook: Technology, Manufacturing and Applications is a comprehensive guide to ePTFE, explaining manufacturing technologies, properties, and applications. Technologies that were previously shrouded in secrecy are revealed in detail, as are the origins and history of ePFTE. The book is an essential handbook for scientists and engineers working in PTFE processing industries, and for manufacturers working with fluoropolymers. It is also of use to purchasing managers and academics.

Temas relacionados