Saltar al contenido principal
Elsevier

Libros en Ciencia de Materiales

  • Mechanics and Fatigue in Wheel/Rail Contact

    • 1 Edición
    • S.L. Grassie
    • Inglés
    These proceedings demonstrate the increasing interest and importance of contact mechanics and wear to the railway industry. The 27 contributions succeed in sustaining a balance between mechanics and metallurgy, theory and practice, and will be of considerable interest to those engaged in research, as well as practising engineers.

  • Applications of Polymer Spectroscopy

    • 1 Edición
    • E.G. Brame
    • Inglés
    Applications of Polymer Spectroscopy focuses on the use of spectroscopy for the determination of polymer structure. This book is divided into three general areas of spectroscopy: nuclear magnetic resonance (NMR) spectroscopy, infrared spectroscopy, and mass spectroscopy. This text is comprised of 16 chapters and begins with a discussion on the applications of NMR spectroscopy, including carbon-13 NMR, proton NMR, and fluorine-19 NMR. The next section considers infrared spectroscopy, with special consideration to the Fourier transform method and the dynamic method of handling the examination of polymer films. The book then examines the applications of mass spectroscopy, which include the usual characterization of decomposition products both by direct and indirect means and by stressing the polymer. The use of chemiluminescence, Raman spectroscopy, and electron spin resonance methods is also covered. The last chapter describes the mass spectrometry of thermally treated polymers. This book is a valuable resource for scientists, students, and researchers in fields ranging from polymer science and materials science to chemistry and engineering.

  • The Fullerenes

    • 1 Edición
    • H.W. Kroto + 2 más
    • Inglés
    Until recently, the element carbon was believed to exhibit only two main allotropic forms, diamond and graphite. Research in the US and Europe has now confirmed the existence of a third previously unknown form - buckminsterfullerene (C60) and its relatives, the fullerenes (C24, C28, C32, C70 etc).The story of fullerene chemistry, physics and materials science began in 1985, almost twenty years after the existence of a spherical carbon cluster was first considered. In September 1985 a joint Sussex/Rice Universities team including Kroto, Heath, O'Brien, Curl and Smalley used a powerful mass spectrometric technique to identify the C+60 species, and proposed a spherical structure and the name buckminsterfullerene... It was not, however, until Krätschmer and Huffman reported the isolation of crystals of C60 in 1990 that the closed cage structure of C60 could be confirmed.The Fullerenes documents the work leading up to 1990 and more recent developments in the field of fullerene research and will serve as an indispensible reference tool for all workers in this area.

  • Electrons In Metals And Alloys

    • 1 Edición
    • J. A. Alonso + 1 más
    • Inglés
    This book is a broad review of the electronic structure of metals and alloys. It emphasises the way in which the behavior of electrons in these materials governs the thermodynamic and other properties of these conducting materials. The theoretical treatment proceeds from a wave mechanics approach to more sophisticated techniques for the description of the properties of metals and alloys.

  • Ballistic Materials and Penetration Mechanics

    • 1 Edición
    • Roy Laible
    • Inglés
    Ballistic Materials and Penetration Mechanics deals with ballistically protective materials and penetration mechanics. The book discusses historical and practical considerations of ballistic protection, including metallic armor, as well as ballistic testing methodology, the ability of a protective material to stop or slow down a particular projectile, and the theoretical aspects of penetration mechanics. It also highlights the importance of stress wave analysis in the penetration and spalling phenomena. Organized into 12 chapters, this volume begins with an overview of the history of the armor and the modern helmet. It proceeds with a discussion of variations in ballistic test methods, errors in test methods, and the importance of the hardness and geometry of both the target and the projectile. The next chapters focus on the importance of fibrous armor, materials that are visually transparent and resistant to penetration by high-energy projectiles and fragments, and transparent armor and ceramic composite armor. The reader is also introduced to materials used in the design of metallic armor, the role of stress waves in the penetration problem, and the use of computer simulation to analyze ballistic impact experiments. The book looks at numerical techniques for modeling hypervelocity impact and concludes with a chapter on the penetration mechanics of textile structures. This book is a valuable resource for scientists working at government, industrial, and university laboratories, as well as law enforcement officers and others who want information on materials that provide the best protection against damage from impacts, explosions, and bullets.

  • Wide-band-gap Semiconductors

    • 1 Edición
    • C.G. Van de Walle
    • Inglés
    Wide-band-gap semiconductors have been a research topic for many decades. However, it is only in recent years that the promise for technological applications came to be realized; simultaneously an upsurge of experimental and theoretical activity in the field has been witnessed. Semiconductors with wide band gaps exhibit unique electronic and optical properties. Their low intrinsic carrier concentrations and high breakdown voltage allow high-temperature and high-power applications (diamond, SiC etc.). The short wavelength of band-to-band transitions allows emission in the green, blue, or even UV region of the spectrum (ZnSe, GaN, etc.). In addition, many of these materials have favorable mechanical and thermal characteristics.Thes... proceedings reflect the exciting progress made in this field. Successful p-type doping of ZnSe has recently led to the fabrication of blue-green injection lasers in ZnSe; applications of short-wavelength light-emitting devices range from color displays to optical storage. In SiC, advances in growth techniques for bulk as well as epitaxial material have made the commercial production of high-temperature and high-frequency devices possible. For GaN, refinement of growth procedures and new ways of obtaining doped material have resulted in blue-light-emitting diodes and opened the road to the development of laser diodes. Finally, while the quality of artificial diamond is not yet high enough for electronic applications, the promise it holds in terms of unique material properties is encouraging intense activity in the field.This volume contains contributions from recognized experts presently working on different material systems in the field. The papers cover the theoretical, experimental and application-oriented aspects of this exciting topic.

  • Plasma Deposition, Treatment, and Etching of Polymers

    The Treatment and Etching of Polymers
    • 1 Edición
    • Riccardo d'Agostino
    • Inglés
    Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices.

  • Polymer Blends Volume 1

    • 1 Edición
    • Donald R Paul
    • Inglés
    Polymer Blends, Volume 1 highlights the importance of polymer blends as a major new branch of macromolecular science. Topics range from polymer-polymer compatibility and the statistical thermodynamics of polymer blends to the phase separation behavior of polymer-polymer mixtures, transport phenomena in polymer blends, and mechanical properties of multiphase polymer blends. The optical behavior, solid state transition behavior, and rheology of polymer blends are also discussed. This book is organized into 10 chapters and begins with an overview of polymer blends, with emphasis on terminology and the effect of molecular weight on the thermodynamics of polymer blends as well as phase equilibria and transitions. The discussion then turns to the miscibility of homopolymers and copolymers, in bulk and in solution, from the experimental and theoretical viewpoints. The chapters that follow explore the statistical thermodynamics of polymer blends, paying particular attention to the Flory and lattice fluid theories, along with the phase relationship in polymer mixtures. The interfacial energy, structure, and adhesion between polymers in relation to the properties of polymer blends are considered. The final chapter examines the phenomena of low molecular weight penetrant transport. Currently accepted models for unsteady-state and steady-state permeation of polymeric materials are presented. A discussion of unsteady-state absorption and desorption behavior observed in a variety of polymer blends complements the treatment of permeation behavior. This book is intended to provide academic and industrial research scientists and technologists with a broad background in current principles and practice concerning mixed polymer systems.

  • Fatigue of Composite Materials

    • 1 Edición
    • Volumen 4
    • K.L. Reifsnider
    • Inglés
    This book provides the first comprehensive review of its kind on the long-term behaviour of composite materials and structures subjected to time variable mechanical, thermal, and chemical influences, a subject of critical importance to the design, development, and certification of high performance engineering structures. Specific topics examined include damage, damage characterization, and damage mechanics; fatigue testing and evaluation; fatigue behaviour of short and long fibre reinforced polymer and metal matrix materials; viscoelastic and moisture effects; delamination; statistical considerations; the modeling of cumulative damage development; and life prediction. The volume provides an extensive presentation of data, discussions, and comparisons on the behaviour of the major types of material systems in current use, as well as extensive analysis and modeling (including the first presentation of work not found elsewhere). The book will be of special interest to engineers concerned with reliability, maintainability, safety, certification, and damage tolerance; to materials developers concerned with making materials for long-term service, especially under severe loads and environments, and to lecturers, students, and researchers involved in material system design, performance, solid mechanics, fatigue, durability, and composite materials. The scope of the work extends from entry level material to the frontiers of the subject.

  • Science and Technology of Rubber

    • 1 Edición
    • Frederick R. Eirich
    • Inglés
    Science and Technology of Rubber covers the most important aspects of rubber science and technology, from synthesis and structure to elasticity and flow, blending, filling, and cross-linking. Polymerization and copolymerization, the rheological behavior of unvulcanized rubber, vulcanization, reinforcement of elastomers by particulate fillers, and the chemical modification of polymers are also discussed. This book is comprised of 14 chapters; the first ten of which take the reader from an introduction through synthesis characterization, mechanical behavior, and flow to the major processing steps of filling, compounding, and vulcanization and to the theories and measurement of elastomeric performance, leaning strongly on the ""materials"" approach. The next three chapters deal with blended, modified, and thermoplastic elastomers, touching on topics such as polymer esterification, etherification, hydrolysis, and hydrogenation as well as the influence of blending on the properties of elastomer/plastic blends, especially impact strength and crack resistance. The book concludes with a chapter on tire manufacture and engineering, with emphasis on the geometric, structural, and chemical aspects of tire. This book will be of vital interest to students, practitioners, and research and development managers, as well as to anyone interested in the unusual chemistry and physics and the outstanding properties and usefulness of elastomers.

  • Diffraction and Imaging Techniques in Material Science P2

    Imaging and Diffraction Techniques
    • 2 Edición
    • S Amelinckx
    • Inglés
    Diffraction and Imaging Techniques in Material Science reviews recent developments in diffraction and imaging techniques used in the study of materials. It discusses advances in high-voltage electron microscopy, low-energy electron diffraction (LEED), X-ray and neutron diffraction, X-ray topography, mirror electron microscopy, and field emission microscopy. Organized into five parts encompassing nine chapters, this volume begins with an overview of the dynamical theory of the diffraction of high-energy electrons in crystals and methodically introduces the reader to dynamical diffraction in perfect and imperfect crystals, inelastic scattering of electrons in crystals, and X-ray production. It then explores back scattering effects, the technical features of high-voltage electron microscopes, and surface characterization by LEED. Other chapters focus on the kinematical theory of X-ray diffraction, techniques and interpretation in X-ray topography, and interpretation of the contrast of the images of defects on X-ray topographs. The book also describes theory and applications of mirror electron microscopy, surface studies by field emission of electrons, field ionization and field evaporation, and gas-surface interactions before concluding with a discussion on lattice imperfections. Scientists and students taking courses on diffraction and solid-state electron microscopy will benefit from this book.

  • Atomic Mechanics of Solids

    • 1 Edición
    • A.K. Macpherson
    • Inglés
    This volume brings together some of the presently available theoretical techniques which will be useful in the design of solid-state materials. At present, it is impossible to specify the atomic composition of a material and its macroscopic physical properties. However, the future possibilities for such a science are being laid today. This is coming about due to the development of fast, cheap computers which will be able to undertake the calculations which are necessary.Since this field of science is fairly new, it is not yet quite clear which direction of analysis will eventually prove to be the most successful. In this respect the author has included the most relevant promising subject areas, based on seven years of research experience in the field. An extensive literature already exists for most of the areas covered here, thus when more detailed analysis can be found elsewhere, the assumptions made are discussed, and only an outline of the method involved is presented. Comprehensive indexes are provided to assist the reader in further studies. This is a potentially important field which is slowly getting underway and only needs a significant development to attract a broader scientific interest. The work will be of considerable interest to program managers needing to assess this new field.

  • Small Scale Structures

    • 1 Edición
    • Volumen 52
    • N.F. de Rooij + 6 más
    • Inglés
    This book contains the proceedings of 3 symposia dealing with various aspects of small scale structures. Symposium A deals with the development of new materials, including ceramics, polymers, metals, etc., their microstructuring as well as their potential for application in microsystems. All kinds of microsystems are considered, e.g. mechanical, magnetic, optical, chemical, biochemical and issues related to assembly and packaging were also covered.Symposium B deals with four topics: synthesis and preparation of nanostructured ceramics and composites with well-controlled geometric order and chemical composition; coupling of these structures to transducers for current and future chemical and biochemical devices based upon microoptics, microelectronics, microionics, microelectrodes or molecular cages; planar thin film structures and the control of covalent thin film/transducer couplings, the control of selective, stable and sensitive recognition centers at the surface, at grain boundaries or in the bulk of selected nanostructured materials with extremely narrow particle size distributions; analysis of these structures and sensor functions by means of techniques utilizing photons, electrons, ions, or atomic particle beam probes.Symposium E examines the structure-property relationships in thin films and multilayers, from the point of view of both fundamental studies and practical applications.

  • Nuclear Materials for Fission Reactors

    • 1 Edición
    • Volumen 28
    • H. Matzke + 1 más
    • Inglés
    This volume brings together 47 papers from scientists involved in the fabrication of new nuclear fuels, in basic research of nuclear materials, their application and technology as well as in computer codes and modelling of fuel behaviour. The main emphasis is on progress in the development of non-oxide fuels besides reporting advances in the more conventional oxide fuels. The two currently performed large reactor safety programmes CORA and PHEBUS-FP are described in invited lectures. The contributions review basic property measurements, as well as the present state of fuel performance modelling. The performance of today's nuclear fuel, hence UO2, at high burnup is also reviewed with particular emphasis on the recently observed phenomenon of grain subdivision in the cold part of the oxide fuel at high burnup, the so-called "rim" effect. Similar phenomena can be simulated by ion implantation in order to better elucidate the underlying mechanism and reviews on high resolution electron microscopy provide further information. The papers will provide a useful treatise of views, ideas and new results for all those scientists and engineers involved in the specific questions of current nuclear waste management.

  • Welding: Theory and Practice

    • 1 Edición
    • Volumen 8
    • D.L. Olson + 2 más
    • Inglés
    This volume gives a comprehensive and thorough review on recent advances in the science of welding and provides a treatise for their application in day-to-day welding activities. The essential science of welding is presented for the first time in a style that is comprehensible to the craftsman, engineer and scientist. The application of welding technology requires familiarity with a broad spectrum of engineering and science. The practitioners of this technology need to be familiar with mathematics, physics, chemistry, metallurgy, electrical engineering, and mechanical engineering to mention the basics. These practitioners may only have a scant knowledge in all areas, and this book is intended to provide those practising welding with a broad but subtly in-depth overview of the subject.To accomplish this the book is divided into: weld pool chemistry and microstructure, processes: high energy density; low energy density; and bonding, heat input and associated stress, and computer control. Each of these areas addresses the literature, the fundamental science and engineering, and where the technology stands with respect to the topic.The knowledge level anticipated is not that of a senior engineer or researcher, although they could enjoy the works as much as anyone, but is more designed for those involved in the daily practise of welding. Thus the book will be of interest to craftsmen, students, engineers, researchers, managers, and those interested in the Theory and Practice of welding.

  • High Tc Superconductor Thin Films

    • 1 Edición
    • L. Correra
    • Inglés
    Interdisciplinary research on superconducting oxides is the main focus of the contributions in this volume. Several aspects of the thin film field from fundamental properties to applications are examined. Interesting results for the Bi system are also reviewed. The 132 papers, including 8 invited, report mainly on the 1-2-3 system, indicating that the Y-Ba-Cu-O and related compounds are still the most intensively studied materials in this field. The volume attests to the significant progress that has been made in this field, as well as reporting on the challenging problems that still remain to be solved.

  • Solid State Ionics

    • 1 Edición
    • H.L. Tuller + 2 más
    • Inglés
    In recent years Solid State Ionics have attracted considerable interest due to the important role which they may play in the future of microelectronics and eventually in other fields of energy storage. This volume presents papers on the theory, experiments and applications in this field including: New materials; Insertion compounds; Transport; Structure; Polymeric electrolytes; Mixed conductors; Protonic and oxygen conductors; and electrochromics.

  • Interlaminar Response of Composite Materials

    • 1 Edición
    • Volumen 5
    • N.J. Pagano
    • Inglés
    This book presents the topics of major importance toward understanding the most feared failure mode in composite laminates, namely delamination. There are few books at present that describe the phenomenon of composite laminate failure by delamination in such detail.Written by pioneers and principal researchers in various aspects of composite delamination, starting from basic principles to the most current research findings, the work provides a complete study of the theoretical and experimental aspects of composite delamination in one volume.

  • High T<INF>c</INF> Superconductor Materials

    • 1 Edición
    • Volumen 14A
    • E. Kaldis + 2 más
    • Inglés
    The dynamic developments in high-temperature superconductivity over the last three years has augmented the importance of materials research not only for applications, but also for the understanding of underlying physical phenomena. The discovery of new superconductors has opened up new facets of High Tc research, and the perfection of already known materials has enabled reliable physical measurements to be carried out, providing a foundation for theoretical models. The papers in this volume present an overview of the recent developments in the field of High Tc-materials research. One of the highlights of this meeting was the plenary lecture by the Nobel laureate K. Alex Müller on the importance of the apical oxygen phenomena which are strongly connected with Tc changes.

  • Etching of Crystals

    Theory, Experiment and Application
    • 1 Edición
    • K. Sangwal
    • Inglés
    Defects in Solids, Volume 15: Etching of Crystals: Theory, Experiment, and Application focuses on the processes, reactions, and methodologies involved in the etching of crystals, including thermodynamics and diffusion. The publication first underscores the defects in crystals, detection of defects, and growth and dissolution of crystals. Discussions focus on thermodynamic theories, nature of pit sites, surface roughening during diffusion-controlled dissolution, growth controlled by simultaneous mass transfer and surface reactions, and chemical and thermal etching. The text then examines the theories of dissolution and etch-pit formation and the chemical aspects of the dissolution process, including catalytic reactions, dissolution of semiconductors, topochemical adsorption theories, and diffusion theories. The book tackles the solubility of crystals and complexes in solution and the kinetics and mechanism of dissolution. Topics include metallic crystals, semiconductors, stability of complexes, relationship between solubility, surface energy, and hardness of crystals, and solvents for crystals and estimation of crystal solubility in solvents other than water. The publication is a dependable source of data for readers interested in the etching of crystals.

  • Modifications Induced by Irradiation in Glasses

    • 1 Edición
    • Volumen 29
    • P. Mazzoldi
    • Inglés
    Many aspects of the interaction of radiation with glasses are reviewed in this volume, with contributions from a broad scientific community. Several of the papers focus on the interdisciplinary approach required to connect technological applications to the basic interactions of energetic ions with insulators, reporting on the challenging problems that still remain to be solved. The high quality of these contributions once again demonstrates that the E-MRS is an efficient forum for interaction between research workers and industry. The proceedings represent an ideal bridge between the sixth and the planned seventh International Conference on Radiation Effects in Insulators to be held in Japan in 1993.

  • Application of Fracture Mechanics to Composite Materials

    • 1 Edición
    • Volumen 6
    • K. Friedrich
    • Inglés
    This multiauthor volume provides a useful summary of current knowledge on the application of fracture mechanics to composite materials. It has been written to fill the gap between the literature on fundamental principles of fracture mechanics and the special publications on the fracture properties of conventional materials, such as metals, polymers and ceramics.The data are represented in the form of about 420 figures (including diagrams, schematics and photographs) and 80 tables. The author index covers more than 500 references, and the subject index more than 1000 key words.

  • Advances in Composite Tribology

    • 1 Edición
    • Volumen 8
    • K. Friedrich
    • Inglés
    Much research has been carried out and a lot of progress has been made towards the use of composite materials in a wide field of tribological applications. In recent years studies have been made to determine to what degree phenomena governing the tribological performance of composites can be generalized and to consolidate interdisciplinary information for polymer-, metal- and ceramic matrix composites.The importance of promoting better knowledge in the areas of friction, lubrication and wear, in general, is demonstrated by the contents of this volume. It covers a wide range of subjects extending from fundamental research on the tribological characteristics of various multi-phase materials up to final applications of composites in wear loaded, technical components. Besides the emphasis on composites tribology, the great practical aspect of the field in many industrial applications is also reviewed by authors who are engaged in applied research as well as those in more academic activities. The articles in this volume will facilitate both researchers and mechanical designers in their work towards a set of predictive, materials engineering-related models for a more reliable use of composites as tribo-materials.Thro... the study of, and observation of, the tribology of sensibly formulated composite systems may emerge a clear and more profound understanding of the subject of tribology. In this sense, this book offers a major and critical evaluation of the state of understanding of the principles of tribology and its ability to serve the practical and commercial needs of this technology generally, and particularly in the context of composite systems.

  • Metallurgical Coatings and Thin Films 1990

    • 1 Edición
    • B.D. Sartwell
    • Inglés
    Metallurgical Coatings and Thin Films 1990 presents the Proceedings of the 17th International Conference on Metallurgical Coatings and 8th International Conference on Thin Films, held in San Diego, California on April 2-6, 1990. It contains 219 papers covering a wide range of topics related to metallurgical coatings and thin films, including high temperature coatings, hard coatings, diamond films, tribology, and ion beam modification. Organized into 99 chapters, this volume begins with a discussion of a thermochemical model for diamond growth from the vapor phase and an experiment in large area diamond coating using a combustion flame torch in its traversing mode. It then explores the properties of diamond films, preparation of diamond-like carbon films using various ion-beam-assisted techniques, deposition of diamond-like films by laser ablation, and coating of cubic BN films on different substrates. The book examines surface processes and rate-determining steps in plasma-induced chemical vapor deposition, and addition of rare earths to improve scale adherence on heat-resisting alloys and coatings. The reader is introduced to high temperature wear and clearance control coatings, thermal barrier coatings, and corrosion resistant coatings. The book also discusses modification of coatings/surfaces to reduce friction; the mechanics of the tribology of thin films systems; mechanochemical interactions in the tribological behavior of materials; analysis and micromechanical testing of tribological coatings; surface modification using directed ion beams; and industrial equipment and processes. This book is a valuable resource for students and researchers interested in metallurgical coatings and thin films.

  • Concise Encyclopedia of Advanced Ceramic Materials

    • 1 Edición
    • R.J. Brook
    • Inglés
    Advanced ceramics cover a wide range of materials which are ceramic by nature but have been developed in response to specific requirements. This encyclopedia collects together 137 articles in order to provide an up-to-date account of the advanced ceramic field. Some articles are drawn from the acclaimed Encyclopedia of Materials Science and Engineering, often revised, and others have been newly commissioned. The Concise Encyclopedia of Advanced Ceramic Materials aims to provide a comprehensive selection of accessible articles which act as an authoritative guide to the subject. The format is designed to help the readers form opinions on a particular subject. Arranged alphabetically, with a broad subject range, the articles are diverse in character and style, thereby stimulating further discussion. Topics covered include survey articles on glass, hot pressing, insulators, powders, and many are concerned with specific chemical systems and their origins, processing and applications. The Concise Encyclopedia of Advanced Ceramic Materials will be invaluable to materials scientists, researchers, educators and industrialists working in technical ceramics.

  • Phase Separation in Glass

    • 1 Edición
    • Volumen 5
    • Oleg V. Mazurin + 1 más
    • Inglés

  • Impurity Doping Processes in Silicon

    • 1 Edición
    • Volumen 2
    • F.F.Y. Wang
    • Inglés
    This book introduces to non-experts several important processes of impurity doping in silicon and goes on to discuss the methods of determination of the concentration of dopants in silicon. The conventional method used is the discussion process, but, since it has been sufficiently covered in many texts, this work describes the double-diffusion method.

  • Ion Beam Processing of Materials and Deposition Processes of Protective Coatings

    • 1 Edición
    • Volumen 53
    • P.L.F. Hemment + 9 más
    • Inglés
    Containing the proceedings of three symposia in the E-MRS series this book is divided into two parts. Part one is concerned with ion beam processing, a particularly powerful and versatile technology which can be used both to synthesise and modify materials, including metals, semiconductors, ceramics and dielectrics, with great precision and excellent control. Furthermore it also deals with the correlated effects in atomic and cluster ion bombardment and implantation.Part two deals with the deposition techniques, characterization and applications of advanced ceramic, metallic and polymeric coatings or thin films for surface protection against corrosion, erosion, abrasion, diffusion and for lubrication of contracting surfaces in relative motion.

  • Superconducting and Low-Temperature Particle Detectors

    • 1 Edición
    • Volumen 5
    • G. Waysand + 1 más
    • Inglés
    As demonstrated by the contributions in this volume, the domain of superconducting and low-temperature devices is in a rapidly expanding phase. Interactions between materials sciences, low-temperature physics, astrophysics, nuclear and particle physics have provided the incentive for new experiments, which could ultimately record such rare interactions as double beta decay, neutrino scattering, or collisions of the elusive dark matter halo particles. The theoretical and experimental improvements achieved during the last year have been impressive. Detection of 60 keV resolution with a non-zero spin material as a target seems therefore realizable in the near future. Similarly, impressive achievements on ballistic phonons detection and superheated superconducting detectors have been presented, together with reliable techniques for developing ultra low noise electronics required by these ambitious experiments. Apart from the contributions presented during the symposium, the two original papers by Niinikoski proposing the use of bolometers as particle detectors have been included in this volume. These papers, despite their current interest, have never been published before. The comprehensive style of the papers will appeal to specialists and non-specialists alike, in particular solid-state physicists will find the volume of considerable interest, as the field of materials research continues to benefit from the type of work presented here.

  • Recent Research in Molecular Beams

    • 1 Edición
    • Immanual Estermann
    • Inglés
    Recent Research in Molecular Beam is a collection of scientific papers that have been inspired by Otto Stern, the founder of Molecular Beam Research. This book is composed of 10 chapters and begins with discussions on the early history of molecular beam research. The next chapters describe the velocity distribution measurements made on potassium molecular beams with a fixed-frequency, variable phase velocity selector, along with a brief consideration of the principles and concepts of electron magnetic moment and atomic magnetism. A chapter presents the atomic beam spectroscopic experiments on the metastable state of the hydrogen-like atoms that depend on a wholly different principle for the detection of transitions. This text further explores the effects of variations in the oscillatory field amplitudes, perturbations by neighboring resonances, perturbations by oscillatory fields, variations in the fixed field amplitudes, and phase shifts of the oscillatory fields. These topics are followed by a comparison of advantages and limitations of various techniques for spin property measurement as they apply in particular to radioactive nuclei, such as optical and molecular gas microwave spectroscopy, nuclear and paramagnetic resonance, and atomic beams. The remaining chapters examine fluid friction in a rarefied gas flow; some applications of molecular beam techniques to chemistry; and the polarized neutrons based on a Stern-Gerlach experiment. This work will be of great value to workers and researchers in molecular beam field.

  • High T<INF>c</INF> Superconductors

    Preparation and Application
    • 1 Edición
    • Volumen 6B
    • P.F. Bongers + 2 más
    • Inglés
    The papers in this two volume set provide the latest information on research and development in the field of high Tc-materials. Special emphasis is placed on methods of preparation and microstructural characterization for both thin films and single crystals. Considerable attention is also paid to the potential applications of thin films and bulk materials. The following topics are covered in detail: New superconductors; Relations between structure and/or substitution and superconductivity in ternary Cu-oxides; Single crystals, microstructure; Thin films, preparation and properties; Technical applications.

  • Precipitation Hardening

    Theory and Applications
    • 2 Edición
    • J. W. Martin
    • Inglés
    Precipitation Hardening (or age-hardening) is an important technique for the metal-using industries. The process is used to enhance the mechanical properties of a wide range of alloys, notably those based on aluminium, but also embracing some nickel and other non-ferrous alloys as well as certain steels. It is important that the mechanisms that produce this improvement in properties are understood so that the desired properties can be optimised. This book provides a thorough treatment and grounding in the subject for the student of materials science and engineering, as well as guidance, for those using the process in industry and in research. A number of excerpts from classic papers are included, which illustrate the development of precipitation hardening from being an art to a science.Precipitatio... Hardening (or age-hardening) is an important technique for the metal-using industries. The process is used to enhance the mechanical properties of a wide range of alloys, notably those based on aluminium, but also embracing some nickel and other non-ferrous alloys as well as certain steels. It is important that the mechanisms that produce this improvement in properties are understood so that the desired properties can be optimised. This book provides a thorough treatment and grounding in the subject for the student of materials science and engineering, as well as guidance, for those using the process in industry and in research. A number of excerpts from classic papers are included, which illustrate the development of precipitation hardening from being an art to a science.

  • Recrystallization and Related Annealing Phenomena

    • 1 Edición
    • F.J. Humphreys + 1 más
    • Inglés
    The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.

  • Rapidly Quenched Metals

    • 1 Edición
    • S Steeb
    • Inglés
    Rapidly Quenched Metals, Volume I covers the proceedings of the Fifth International Conference on Rapidly Quenched Metals, held in Wurzburg, Germany on September 3-7, 1984. The book focuses on amorphous and crystalline metals formed by rapid quenching from the melt. The selection first covers the scope and trends of developments in rapid solidification technology, rapid solidification, and undercooling of liquid metals by rapid quenching. Discussions focus on experimental method, powders, strip, particulate production, consolidation, and alloys and alloy systems. The text then examines the solidification of undercooled liquid alloys entrapped in solid; crystallization kinetics in undercooled droplets; and grain refinement in bulk undercooled alloys. The manuscript tackles the undercooling of niobium-germanium alloys in a 100 meter drop tube; influence of process parameters on the cooling rate of the meltspinning process; and the mechanism of ribbon formation in melt-spun copper and copper-zirconium. The formation and structure of thick sections of rapidly-solidified material by incremental deposition and production of ultrafine dispersions of rare earth oxides in Ti alloys using rapid solidification are also mentioned. The selection is a valuable reference for physicists, chemists, physical metallurgists, and engineers.

  • Laser Materials Processing

    • 1 Edición
    • Volumen 3
    • Michael Bass
    • Inglés
    Laser Materials Processing aims to introduce lasers and laser systems to the newcomers to laser terminology and to provide enough background material on lasers to reduce one's hesitation to employ these devices. The book covers the use of lasers in materials processing, including its application in cutting and welding, as well as the principles behind them; laser heat treatment; rapid solidification laser processing at high power density; shaping of materials using lasers; and laser processing of semiconductors. The selection also covers considerations in laser manufacturing and a survey in laser applications. The text is recommended for both experienced laser users, engineers, or scientists yet unfamiliar with the subject. The book is also recommended for those who wish to know about the importance of lasers in the field of materials processing, as the bulk of the book is devoted to the discussions of some of the most important materials processing activities in use or under development.

  • Selected Topics in Group IV and II-VI Semiconductors

    • 1 Edición
    • Volumen 54
    • E.H.C. Parker + 4 más
    • Inglés
    This book contains the proceedings of two symposia which brought together crystal growers, chemists and physicists from across the world. The first part is concerned with silicon molecular beam epitaxy and presents an overview of the most research being done in the field.Part two discusses the problems dealing with purification, doping and defects of II-VI materials, mainly of the important semiconductors CdTe and ZnSe. The focus is on materials science issues which are the key for a better understanding of these materials and for any industrial application.

  • Radiation Effects Computer Experiments

    • 1 Edición
    • J.R. Beeler
    • Inglés
    Defects in Solids, Volume 13: Radiation Effects Computer Experiments provides guidance to persons interested in learning how to develop and use computer experiment programs to simulate defect production and annealing in solids. The book first elaborates on computer experiment methods and outline of defect properties computations. Topics include metal models used in defect property example calculations; configuration energy computation procedure; migration energy computation procedure; dynamical method; and Monte Carlo method. The publication also examines vacancies and divacancies and self interstitials. The manuscript takes a look at impurity atoms, defect migration, and vacancy clusters. Discussions focus on heterogeneous nucleation of vacancy clusters and voids, vacancy and divacancy migration, substitutional metallic large impurity atom, and vacancy clusters in face-centered cubic metals. The publication also tackles binary collision approximation cascade program construction and collision cascades and displacement spikes. The text is a valuable source of information for readers wanting to develop and use computer experiment programs to copy defect production and annealing in solids.

  • Friction and Wear of Polymer Composites

    • 1 Edición
    • Volumen 1
    • Klaus Friedrich
    • Inglés
    Providing a useful summary of current knowledge on the friction and wear properties of composite materials, this book fills the gap between publications on fundamental principles of tribology and those on the friction and wear behavior of metals and polymers. Detailed coverage is given of: the fundamental aspects of tribology in general and polymer composites in particular; the effects of the microstructure of composites on friction and wear behavior under different external loading conditions; and the problem of the control of friction and wear behavior in practical situations. Although emphasis is on polymer composites associated with bearing-type applications, part of the book is also devoted to the friction and wear of metal-based composites and rubber compounds. The data are represented in the form of 277 figures, diagrams and photographs, and 68 tables. The author index covers more than 670 references, and the subject index more than 1,000 keywords.The book will be of particular interest to: those involved in research on some aspects of polymer composites tribology (material scientists, physical chemists, mechanical engineers); those wishing to learn more methods for solving practical friction or wear problems (designers, engineers and technologists in industries, dealing with selection, reprocessing and application of polymer engineering materials); and teachers and students at universities.

  • Semiconducting Ore Minerals

    • 1 Edición
    • R Shuey
    • Inglés
    Developments in Economic Geology, 4: Semiconducting Ore Minerals provides a comprehensive discussion of the semiconductor physics of ore minerals, which is a specialized field that is interdisciplinary to materials science and earth science. The book is organized into four parts. Part I deals with basic principles such as the electronic structure of solids; electrical conduction in semiconductors; and various crystal properties which, like conductivity, depend primarily upon the electronic structure. It also discusses theoretical and experimental investigations pertinent to complex electrical inhomogeneity. Part 2 examines the properties of elements such as bismuth, copper, and graphite. Part 3 deals with sulfides including arsenopyrite, bornite, chalcocite, chalcopyrite, covellite, molybdenite, pyrrhotite, and sphalerite. Part 4 covers oxides, including cassiterite, cuprite, hematite, magnetite, pyrolusite, and rutile. This book may be a useful reference for those involved with research on ore minerals, including geophysicists, geochemists, or extractive metallurgists.

  • High Temperature Corrosion of Advanced Materials and Protective Coatings

    • 1 Edición
    • Yahachi Saito + 2 más
    • Inglés
    This book brings together the experience of specialists on High Temperature Corrosion. The 43 papers discuss topics related to the high temperature corrosion of engineering alloys, ceramics and protective coatings. The papers will be a useful and dynamic tool for those wishing to increase their knowledge of High Temperature Corrosion, as well as providing a guide to recent literature in this field.

  • Rapidly Quenched Materials

    • 1 Edición
    • H. Fredriksson + 2 más
    • Inglés
    The 327 papers in this two-volume set cover a wide range of topics concerning the production, processing and properties of rapidly quenched melts. Various techniques for the production of non-equilibrium materials are also discussed, including solid state amorphization by rapid interdiffusion and thermobaric quenching.

  • Defect Control in Semiconductors

    • 1 Edición
    • K. Sumino
    • Inglés
    Defect control in semiconductors is a key technology for realizing the ultimate possibilities of modern electronics. The basis of such control lies in an integrated knowledge of a variety of defect properties. From this viewpoint, the volume discusses defect-related problems in connection with defect control in semiconducting materials, such as silicon, III-V, II-VI compounds, organic semiconductors, heterostructure, etc.The conference brought together scientists in the field of fundamental research and engineers involved in application related to electronic devices in order to promote future research activity in both fields and establish a fundamental knowledge of defect control. The main emphasis of the 254 papers presented in this volume is on the control of the concentration, distribution, structural and electronic states of any types of defects including impurities as well as control of the electrical, optical and other activities of defects. Due to the extensive length of the contents, only the number of papers presented per session is listed below.

  • Synthesis, Crystal Growth and Characterization

    • 1 Edición
    • K. Lal
    • Inglés
    Synthesis, Crystal Growth and Characterization presents the proceedings of the International School on Synthesis, Crystal Growth and Characterization of Materials for Energy Conversion and Storage, held on October 12-23, 1981, at the National Physical Laboratory in New Delhi, India. The book consists of lectures by distinguished scientists from around the world who tackle different aspects of synthesis, crystal growth, characterization of materials, energy conversion, and energy storage. Organized into four parts encompassing 26 chapters, the book begins with an overview of the synthesis of materials at high temperatures and pressures before turning to a discussion of how macrocrystalline and amorphous silicon is prepared. It then looks at fundamental principles underlying the process of crystal growth, both from the vapor phase and from melt, and methodically introduces the reader to the different techniques used to characterize materials, including neutron scattering and electron transport. The next chapters focus on point defects and aggregates that influence the critical electronic properties of semiconducting materials, X-ray diffraction studies of strains and stresses in thin films used in solid-state devices, and electron spectroscopic studies of solid surfaces. The book also considers the role of physics in microelectronics and vice versa, fast ion transport in solids, and the concept of Syadvada in relation to modern physics. This volume is a valuable resource for participants of the International School on Synthesis, Crystal Growth and Characterization of Materials for Energy Conversion and Storage, as well as active researchers working in areas related to the field.

  • Computed Electron Micrographs And Defect Identification

    • 1 Edición
    • A.K. Head
    • Inglés
    Computed Electron Micrographs and Defect Identification illustrates a technique for identifying defects in crystalline solids by the comparison of their images, which are produced in the electron microscope, with corresponding theoretical images. This book discusses the diffraction of electrons by a crystal; the two-beam dynamical equations; the absorption parameters; the deviation of the crystal from the Bragg reflecting position; the extinction distance; the displacement vector; and the foil normal. Chapter three presents the experimental techniques for determination of beam direction, defect line normal, foil normal, foil thickness, and extinction distance. Chapters four to seven explore ONEDIS and TWODIS and their principles. Chapters eight and nine focus on the application and limitations of the technique, while the last chapter explores the different computer programs related to the technique. Post-graduate students, as well as researchers using transmission electron microscopy for studying defects in crystalline solids, will find this book invaluable.

  • Diffraction and Imaging Techniques in Material Science P1

    Electron Microscopy
    • 2 Edición
    • S Amelinckx
    • Inglés
    Diffraction and Imaging Techniques in Material Science describes the various methods used to study the atomic structure of matter at an atomic scale based on the interaction between matter and radiation. It classifies the possible methods of observation by making a list of radiations on the basis of wavelength, including ions, X-ray photons, neutrons, and electrons. It also discusses transmission electron microscopy, the weak-beam method of electron microscopy, and some applications of transmission electron microscopy to phase transitions. Organized into 13 chapters, this volume begins with an overview of the kinematic theory of electron diffraction and the ways to treat diffraction by a deformed crystal. It discusses the dynamical theory of diffraction of fast electrons, the treatment of absorption in the dynamical theory of electron diffraction, the use of electron microscopy to study planar interfaces, and analysis of weak-beam images. The book also covers the use of computed electron micrographs in defect identification, crystallographic analysis of dislocation loops containing shear components, and detection and identification of small coherent particles. In addition, the reader is introduced to interpretation of diffuse scattering and short-range order, along with the crystallography of martensitic transformations. The remaining chapters focus on the working principle of the transmission electron microscope, experimental structure imaging of crystals, and the study of diffuse scattering effects originating from substitutional disorder and displacement disorder. The information on diffraction and imaging techniques in material science contained in this book will be helpful to students, researchers, and scientists.

  • Frontiers of Materials Research: Electronic and Optical Materials

    Proceedings of the symposia N: Frontiers of Materials Research, A: High Tc Superconductors, and D: Optoelectronic Materials and Functional Crystals of the C-MRS International 1990 Conference Beijing, China, 18 – 22 June 1990
    • 1 Edición
    • Meiying Kong
    • Inglés
    Frontiers of Materials Research/Electronic And Optical Materials: Volume I is part of a five-volume compilation of the proceedings of C-MRS International 1990 Conference held in Beijing, China. The said conference discusses the areas of research in materials science. The book is divided into three parts. Part 1 covers topics involved in the development and progress of materials such as the focused beam ion; intermetallic compounds; polymers; and the application of computers in the field. Part 2 includes studies related to high Tc superconductors such as methods related to the field; the effects of oxygen and partial pressure on the properties of superconducting; and the study of superconductivity and crystallography. Part 3 presents papers related optoelectronic materials and functional crystals, which are mostly about the growth, properties, and uses of the different crystals being studied in each paper. The text is recommended for scientists and engineers who would like to know more about the field of materials science, especially those who would like to be involved in materials research.

  • III-V Semiconductor Materials and Devices

    • 1 Edición
    • Volumen 7
    • R.J. Malik
    • Inglés
    The main emphasis of this volume is on III-V semiconductor epitaxial and bulk crystal growth techniques. Chapters are also included on material characterization and ion implantation. In order to put these growth techniques into perspective a thorough review of the physics and technology of III-V devices is presented. This is the first book of its kind to discuss the theory of the various crystal growth techniques in relation to their advantages and limitations for use in III-V semiconductor devices.

  • Hot Isostatic Pressing '93

    • 1 Edición
    • L. Delaey + 1 más
    • Inglés
    Various topics related to Hot Isostatic Pressing are presented in this volume. As well as papers on more general aspects of HIPing, the papers are organised into four groups: metals and alloys, ceramics, HIP-engineering, and HIP-fundamentals. Castings, powder metallurgy, intermetallics, surface engineering and diffusion bounding are covered in the first group. The papers on ceramics give special attention to HIPing of structural and functional ceramics as well as to ceramic composites. Some interesting HIP-engineering innovations are presented on HIP equipment and HIP-technology. The papers which discuss HIP-fundamentals focus around materials modelling and component modelling.

  • Metallurgical Coatings 1988

    Proceedings of the 15th International Conference on Metallurgical Coatings, San Diego, CA, U.S.A., April 11–15, 1988
    • 1 Edición
    • R Krutenat
    • Inglés
    Metallurgical coatings 1988 is a compilation of the proceedings of the 15th International Conference on Metallurgical Coatings. This volume is divided into four parts, which deal with synthesis and properties of coatings used in microelectronic applications; methods of characterizing coatings and modified surfaces; protective coatings for magnetic and optical thin film media; and thick and thin film censors. The first part of this volume is further subdivided into five sections focusing on thin film barrier layers, metallization for VLSI circuits, thin films used in packaging technology, new materials and emerging technologies and synthesis and microstructure of high Tc superconductors. The second part is also subdivided into four sections, each presenting different methods, such as the surface and thin film analysis techniques, microstructural characterization techniques, mechanical properties of films and coatings, and non-destructive characterization techniques. Part three discusses the preparation and characterization of reactively sputtered silicon nitride thin films, the bond structures and properties of chemically vapor-deposited amorphous SiC, and the wear of Co-Ni thin film magnetic recording tape against metallic and ceramic surfaces. Finally, this volume explores the insert-mounted thin film sensors for real-time.

  • Surface Preparation Techniques for Adhesive Bonding

    • 2 Edición
    • Raymond F. Wegman + 1 más
    • Inglés
    Surface Preparation Techniques for Adhesive Bonding is an essential guide for materials scientists, mechanical engineers, plastics engineers, scientists and researchers in manufacturing environments making use of adhesives technology. Wegman and van Twisk provide practical coverage of a topic that receives only cursory treatment in more general books on adhesives, making this book essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics. Wegman and van Twisk provide a wealth of practical information on the processing of substrate surfaces prior to adhesive bonding. The processing of aluminum and its alloys, titanium and its alloys, steels, copper and its alloys, and magnesium are treated in the form of detailed specifications with comparative data. Other metals not requiring extensive treatment are also covered in detail, as are metal matrix and organic matrix composites, thermosets and thermoplastics. This new edition has been updated with coverage of the latest developments in the field including the sol-gel process for aluminum, titanium, and stainless steel, atmospheric plasma treatment for metals, plastics and rubbers and treatments for bronze and nickel alloys.

Temas relacionados