Saltar al contenido principal
Elsevier

Libros en Ciencia de Materiales

  • Hybrid Nanofiller Reinforced Thermoset Nanocomposites

    • 1 Edición
    • Nisa V. Salim + 3 más
    • Inglés
    Hybrid Nanofiller Reinforced Thermoset Nanocomposites provides a comprehensive review of the latest advances in this important research field. The book covers all aspects and terminologies, from fundamentals to advanced high-end applications. The effect of shape and aspect ratio, along with synthesis protocols and their impact on ultimate properties are examined in detail. Recent advancements in simulation, characterization, mechanism reinforcement, and high-end applications are also explored. With contributions from international experts, readers will gain valuable insights into the latest developments in this fast-evolving research field.The book will be a valuable reference source for academic and industrial researchers, materials scientists and engineers, chemists, industrial manufacturers, and other professionals working in the field of hybrid nanofiller reinforced thermoset nanocomposites for high-end applications.

  • Polymer-Based Hybrid Composites

    Emerging Trends and Applications
    • 1 Edición
    • Senthil Muthu Kumar Thiagamani + 4 más
    • Inglés
    Polymer-Based Hybrid Composites: Emerging Trends and Applications presents the latest advances in this important field. The book emphasizes the hybridization of reinforcing phases in terms of precisely optimizing the properties of these materials. A wide range of fibers and matrices are discussed, along with key challenges from basic principles to applications. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, and other professionals working in the development of polymer-based hybrid composites for a broad range of different applications.

  • Ceramic Electrochemical Sensors

    Materials, Design, and Applications
    • 1 Edición
    • J.G. Manjunatha + 1 más
    • Inglés
    Ceramic Electrochemical Sensors: Materials, Design, and Applications provides a comprehensive exploration of the role of ceramic materials in electrochemical sensor technology. Responding to the growing demand for advanced sensing across environmental monitoring, healthcare and industry, the book bridges a knowledge gap by linking fundamentals to practical application. It elucidates the electrical, thermal and chemical properties that make ceramics such as zirconia, ceria and titania suitable for sensing, and covers materials selection, fabrication techniques, sensor design and performance characterization, including electrochemical impedance spectroscopy, cyclic voltammetry and current–voltage measurement.With coverage of traditional processing alongside 3D printing and advanced manufacturing, the book presents applications spanning gas sensing, industrial process control, automotive emissions, healthcare, food safety, water quality, energy storage and wearable devices, supported by real-world case studies. It equips researchers, electrochemists, materials scientists, engineers and postgraduate students with the knowledge to innovate in this specialized field.

  • Advances in Chemically-Modified Natural Polysaccharides for Biomedical Applications

    • 1 Edición
    • Amit Kumar Nayak + 1 más
    • Inglés
    Advances in Chemically Modified Natural Polysaccharides for Biomedical Applications reviews the characterization, properties, and chemical modification of natural polysaccharides in biomedical applications. Covering a wide range of functionalization techniques - including esterification, carboxymethylation, sulfation, and grafting - this book explores how these modifications enhance the physicochemical properties and biomedical performance of polysaccharides. Chapters highlight a broad selection of chemically modified polysaccharide types, as well as various different applications such as tissue engineering, drug delivery, cancer targeting, wound dressing, vaccine development and more. Advances in Chemically Modified Natural Polysaccharides for Biomedical Applications is of interest to researchers, academics, and industry professionals in the fields of materials science, materials chemistry, biomedical engineering, and bioengineering, with an interest in the development of novel biomaterials for biomedical applications.

  • Thermal Management in Microelectronics with Carbon-Based Composites

    • 1 Edición
    • Lin Qiu + 2 más
    • Inglés
    Thermal Management in Microelectronics with Carbon-Based Composites provides a comprehensive exploration of the design, mechanisms, and applications of carbon-based materials—such as graphene and carbon nanotubes—for advanced thermal management in microelectronic devices. The book’s objective is to address the mounting challenges posed by miniaturization and increasing power densities in microelectronics, especially the critical barrier of efficient heat dissipation. The book aims to bridge the gap between fundamental scientific theory and practical engineering solutions, focusing on enhancing the thermal conductivity and interfacial heat transfer of carbon nanomaterial assemblies. The book encompasses measurement methods, theoretical insights, interfacial heat transfer mechanisms, applications in devices, wearables and energy storage systems.The book will be a valuable reference resource for materials scientists and engineers, thermal scientists, as well as microelectronics/pho... researchers and postgraduate students working in above-related fields. The book uniquely offers a systematic, in-depth, and application-oriented resource, providing authoritative guidance for both research and industrial applications.

  • Sustainable Fiber-Based Hydrogel Composites

    Multifunctional Solutions for Biomedical Challenges
    • 1 Edición
    • Mohit Kumar + 3 más
    • Inglés
    Sustainable Fiber-Based Hydrogel Composites: Multifunctional Solutions for Biomedical Challenges explores the intersection of natural fibers and hydrogel composites, addressing critical challenges in developing sustainable biomaterials for biomedical applications. Structured into six key sections, the book outlines fabrication techniques, characterization, and multifunctional applications, along with case studies and future directions. Researchers will gain valuable insights into the mechanical and biological properties of fiber-reinforced hydrogel composites, promoting eco-friendly solutions without compromising functionality. This book will be of interest to researchers and academics in materials science, biomaterials, polymer science, composites science, and anyone with an interest in the development of sustainable biomaterials for biomedical applications.

  • 3D Printing of Carbon-based Materials

    Cutting Edge Design, Innovative Technology and Practical Applications
    • 1 Edición
    • Chaudhery Mustansar Hussain
    • Inglés
    3D Printing of Carbon-Based Materials: Cutting Edge Design, Innovative Technology and Practical Applications bridges the gap between theory and practice. The book delves deep into the intricacies of printing with carbon-based materials and explores their diverse range of applications across various industrial sectors. Sections provide a holistic overview of 3D printing techniques tailored specifically for carbon-based materials. Through a combination of theoretical insights, practical methodologies, and real-world case studies, the book offers the reader (researcher and engineer) with actionable guidance for optimizing material selection, printing parameters, and post-processing techniques to achieve desired outcomes in terms of mechanical properties, surface finish, and functionality.Moreov... it addresses the growing demand for sustainable manufacturing solutions by highlighting the role of carbon-based materials in mitigating environmental impacts and promoting resource efficiency.

  • Nanocellulose/MXene Composites

    Synthesis, Properties, Interface Interaction, and Applications
    • 1 Edición
    • Ming-Guo Ma
    • Inglés
    Nanocellulose/MXene Composites: Synthesis, Properties, Interface Interaction, and Applications systematically and comprehensively introduces the latest research progress, preparation techniques, performance characteristics, and potential application prospects of nanocellulose/MXene composites. With the rapid development of nanotechnology and materials science, the combination of these two materials provides unprecedented opportunities for the development of high-performance and multifunctional new composite materials, but the integration and application guidance can be difficult to isolate from existing literature. The book fills this knowledge gap, with the ultimate aim of accelerating the transformation of scientific research results into practical applications. Chapters provide a complete overview of our current knowledge, addressing basic theory and background knowledge, preparation technology and processes, structure and performance, functionalization and application, case studies and future prospects, and environmental and safety considerations.The book explores synthesis strategies of nanocellulose/MXene composites, such as solution mixing, in-situ polymerization, and layer-by-layer self-assembly. It introduces the technical means used to analyze the microstructure (such as morphology and interface interactions), physical properties (such as conductivity, thermal stability, and mechanical strength), and chemical properties of nanocellulose/MXene composites, as well as how these properties are influenced by factors such as component ratios and preparation conditions. Readers will learn how to endow nanocellulose/MXene composites with specific functional properties such as electromagnetic shielding, energy storage, biocompatibility, and environmental responsiveness through structural design and functionalization modification. The book also analyzes the potential applications of these materials in electronic devices, energy storage, biomedical applications, environmental protection, and other fields.

  • Additive Manufacturing of Piezoelectric Ceramic-Based Biocomposites

    Design, Strategies, and Challenges
    • 1 Edición
    • Anuj Kumar + 1 más
    • Inglés
    Additive Manufacturing of Piezoelectric Ceramic-based Biocomposites: Design, Strategies, and Challenges presents the latest developments in this important research field. The book begins with an introduction to additive manufacturing technology and its role in piezoelectric ceramic-based bioinks development. It then goes on to discuss the utility of 3D constructs developed through additive manufacturing techniques using piezoelectric ceramic-based bioinks for biomedical applications. Design approaches for modifying piezoelectric ceramic-based materials are also discussed as are additive manufacturing strategies for developing piezoelectric ceramic laden bioinks. Post-processing strategies and computational modeling, analysis, troubleshooting, and optimization are also thoroughly explored.Users will also find selected case studies and real-world applications, making it a valuable reference resource for academic and industrial researchers, materials scientists and engineers, chemists, and manufacturers working on the research and development of advanced piezoelectric ceramics, with a particular interest in additive manufacturing processes and biomedical applications.

  • Complete Casting Handbook

    Metal Casting Processes, Metallurgy, Techniques and Design
    • 3 Edición
    • John Campbell
    • Inglés
    Complete Casting Handbook: Metal Casting Processes, Metallurgy, Techniques and Design, Third Edition provides modern principles and processes in both breadth and depth while also retaining a clear, practical focus. The book has a unique viewpoint, interpreting the behavior of castings and metals as a whole, in terms of their bifilm content, the largely invisible casting defects which control much of the structure and behavior of metals. This new edition has been thoroughly revised, with updated sections on extended fluidity, additive manufacturing of molds, porosity as an entrainment defect, tensile properties and other failure aspects, metrology and much more. The third edition has also been updated to include two brand new chapters, one focused on avoidance of fracture through good casting, and the other on sustainability in the casting industry.

  • Herbal Nanoparticles

    Sources and Applications
    • 1 Edición
    • Santosh Kumar Upadhyay + 1 más
    • Inglés
    Herbal Nanoparticles: Sources and Applications provides a comprehensive overview of the evolving field of herbal nanoparticles, which merges traditional plant-based medicine with innovative nanotechnology.The book starts with an introduction to herbal nanoparticles, followed by detailed chapters on synthesis methods, botanical sources, and green approaches to nanoparticle production. It then explores physicochemical properties and advanced characterization techniques essential for understanding these particles.The following chapters focus on practical applications, from crop improvement, enzyme technology, and waste valorization to drug delivery, targeted therapy, and treatment of various diseases such as cancer and neurological disorders. Safety, toxicology, and regulatory challenges are also discussed, along with dedicated chapters on the commercialization and future research directions.With detailed discussions of formulation techniques, nanosafety, and practical applications in healthcare, agriculture, and biotechnology, this book is a valuable resource for researchers, advanced students, and professionals interested in herbal nanotechnology and its applications across a wide range of fields.

  • Polymer Nanocomposites for Electromagnetic Interference and Nuclear Shielding

    Fundamentals and Applications
    • 1 Edición
    • Ayesha Kausar
    • Inglés
    Polymer Nanocomposites for Electromagnetic Interference and Nuclear Shielding: Fundamentals and Applications provides a comprehensive, up-to-date account of the latest developments in this field, targeting both the fundamental mechanisms and industrial applications. It positions polymeric nanocomposites as superior alternatives to traditional metallic and ceramic shielding materials due to their light weight, flexibility, processability, and eco-friendly properties. The book is timely as advances in nanotechnology and the increasing demand for advanced shielding materials in aerospace, defense, electronics, and energy sectors drive rapid innovation and pose new challenges for researchers. Key themes include the basic phenomena of EMI and nuclear shielding, design and fabrication of polymer-based shielding materials, the role of nanofillers (carbonaceous, inorganic, MOFs, COFs), impact of microstructure and processing (films, fibers, foams, 3D printing), and application-driven case studies. Environmental considerations and recyclability are also discussed. The content is structured into ten chapters, starting with theoretical fundamentals, then systematically moving through material classes, fabrication methods, functional architectures, industrial applications, green materials, and future commercial prospects. The book fills a critical gap by providing a systematic, application-based resource and includes standardized methods, performance metrics, and real-world examples.

  • Surface-Enhanced Raman Spectroscopy for Cancer Diagnostics

    Fundamental Principles and Applications
    • 1 Edición
    • Linley Li Lin + 4 más
    • Inglés
    Surface-Enhanced Raman Spectroscopy for Cancer Diagnostics: Fundamental Principles and Applications bridges the gap between theory and practice, offering a detailed overview of surface-enhanced Raman spectroscopy (SERS) principles and its use in detecting cancer biomarkers. Starting with the basics of Raman spectroscopy and SERS, the book explores the relevance, design strategies, and applications of SERS in early cancer detection and treatment. It highlights the impact of nanotechnology on SERS, including the development of substrates and nanoprobes for both label-free and labeled detection. Following chapters discuss SERS immunoassays, imaging, and spectroscopic technologies for detecting cancer biomarkers.Finally, the book explores non-invasive detection methods, multimodal imaging techniques, and the integration of artificial intelligence in SERS for test analysis, making it a valuable resource for researchers interested in the application of nanotechnologies in the field of cancer diagnostics and treatment.

  • Polymerisation in 3D Printing

    Inks, Resins, and Reactions
    • 1 Edición
    • Jianyong Jin + 1 más
    • Inglés
    Polymerisation in 3D Printing: Inks, Resins, and Reactions provides a comprehensive overview to polymerization-based 3D printing, bridging the fundamentals with cutting-edge 3D printing applications. The book covers fundamental polymer chemistry concepts essential for understanding resin and ink formulation, including photopolymerization mechanisms, rheology, and crosslinking strategies that influence printability and mechanical properties. Advanced topics such as controlled radical polymerization, hydrogel networks, and bio-based polymers are discussed to highlight innovative material design approaches. The book also features emerging 3D printing technologies, such as in situ polymerization, infrared curing, and volumetric printing, highlighting the processes that enable advanced technologies. The final sections of the book cover applications in biomedical devices and electronics, focusing on the practical impact of polymerization in additive manufacturing, and offer a practical formulation guide, complete with material tables and protocols. This book is a valuable reference to researchers, materials scientists, and industrial R&D professionals interested in next-generation printable polymer materials.

  • Biodegradable Composites

    Sustainable Engineering Solutions for Zero Waste Manufacturing
    • 1 Edición
    • Madhu Puttegowda + 4 más
    • Inglés
    Biodegradable Composites: Sustainable Engineering Solutions for Zero Waste Manufacturing is a comprehensive reference resource that delves into the integration of biodegradable materials and their use in sustainable manufacturing processes. The book aims to provide a thorough understanding of bio-based composites, encompassing the latest manufacturing techniques and real-world case studies demonstrating successful integration in industries such as automotive, packaging, and construction. Key topics covered include: the science and engineering behind biodegradable composites; techniques for the integration of eco-friendly materials in various industrial sectors; case studies demonstrating real-world applications; comprehensive analysis of the sustainability and environmental impact of these materials; social sustainability in the supply chain and advanced manufacturing techniques like 3D printing and smart manufacturing. The book is structured to benefit a wide audience, including researchers, industry professionals, postgraduate students, sustainability officers, and policymakers. It is crucial for anyone involved in or studying sustainable manufacturing and biodegradable composites, as it provides insights into overcoming technical constraints and implementing sustainable practices at an industrial scale.

  • Fundamentals of Microbial Nanotechnology and Its Applications

    • 1 Edición
    • Sukhvinder Singh Purewal + 2 más
    • Inglés
    Fundamentals of Microbial Nanotechnology and Its Applicationsprovides a comprehensive introduction to the rapidly evolving field of microbial nanotechnology, bridging microbiology and nanoscience to address today’s environmental, industrial, and biomedical challenges. This book explores the fundamental mechanisms of microbial synthesis, detailing green and sustainable practices, advanced methodologies, and the physicochemical characterization of nanoparticles. By highlighting microbial systems, including bacteria, fungi, extremophiles, and algae, it examines their potential to produce metallic nanoparticles, carbon dots, and magnetic materials, alongside hybrid systems that combine polymers, carbon-based materials, and metals. The chapters also review important environmental and health-related issues, discussing eco-friendly synthesis methods, heavy metal remediation, antimicrobial innovations, and drug delivery systems.With a comprehensive overview of the foundational principles and emerging applications of microbial nanotechnology, this book is as a valuable reference for researchers and scientists developing novel bio-nanotechnologica... applications or seeking to scale up production techniques.

  • Lignocellulosic Film/Paper Based Advanced Functional Materials

    • 1 Edición
    • Chuanling Si + 4 más
    • Inglés
    The key appeal of Lignocellulosic Film/Paper Based Advanced Functional Materials to readers is its targeted, application-driven focus on lignocellulosic film and paper based functional materials that links fundamental composition and characterization to reproducible processing, diverse high-value applications including energy storage, packaging and sensors, and sustainability considerations—all in a single, coherent volume. Unlike many competitors that treat either fundamentals, processing, or applications in isolation, this book combines rigorous theory, practical case studies and an industry-oriented perspective that makes it useful both to academics and to industry professionals seeking translation paths. The comprehensive framework from fundamentals to applications is structured to allow readers to grasp both the scientific foundations and the practical significance of these materials. The interdisciplinary perspective, assimilating science, engineering and sustainability equips readers to translate laboratory research into scalable, eco-friendly solutions. The book’s forward-looking orientation integrating current theory with practical guidance and case studies supports readers in navigating real-world challenges in material design, optimization and industrial application

  • Advances in Two Dimensional Materials for Gas Sensing Applications

    Fundamentals, Emerging Trends, Opportunities, and Challenges
    • 1 Edición
    • Ram Sevak Singh + 2 más
    • Inglés
    Advances in Two Dimensional Materials for Gas Sensing Applications: Fundamentals, Emerging Trends, Opportunities, and Challenges provides a comprehensive and up-to-date resource on the use of 2D materials for gas sensing. The book addresses the fundamental properties, synthesis methods, and physicochemical characterization of a wide range of 2D materials—including graphene, MXenes, metal oxides, chalcogenides, and emerging frameworks that are tailored for sensor technologies. Sections also cover gas sensing mechanisms, device integration, strategies for performance enhancement, and the latest advances in theoretical and computational methodologies.Users will find this to be a resource that facilitates informed material selection, device design, and performance optimization while also focusing on reliability, scalability, and the challenges of commercializing 2D material-based gas sensors. In addition, sections discuss 2D nanostructures for advanced sensor applications, highlighting their unique surface properties, high sensitivity, and compatibility with miniaturized devices.

  • Cellulose Technologies

    Innovations and Applications
    • 1 Edición
    • Kalim Deshmukh + 2 más
    • Inglés
    Cellulose Technologies: Innovations and Applications provides a comprehensive overview of the latest advances in this field. The book covers the synthesis, properties, and diverse applications of cellulose and its derivatives while also examining synthesis techniques, structural aspects, and various properties, including electronic, optical, magnetic, mechanical, thermal, and tribological properties. Additionally, exfoliation and functionalization methods, along with microscopic and spectroscopic characterizations of cellulose are also discussed. Applications of cellulose in a wide range of fields such as 3D printing, electronics, photonics, biosensors, energy storage, water treatment, EMI shielding, and biomedical applications are addressed in detail.The diverse array of topics covered make this book a valuable reference resource for all individuals engaged in the cellulose domain, particularly for the development of new innovations and advanced applications.

  • Ionic Liquid Polymer-Based Hybrid Composites

    Materials, Properties, and Devices
    • 1 Edición
    • Daniela M. Correia + 2 más
    • Inglés
    Ionic Liquid Polymer-Based Hybrid Composites: Materials, Properties, and Devices offers a comprehensive review and analysis of ionic liquid polymer-based hybrid composites, a subfield of smart and multifunctional materials that is having a growing impact on a wide range of application areas. The book explores various qualities of ionic liquids, including their adaptability in terms of functional response, tuneability, and their ability to be integrated into polymer matrices. Such qualities make these materials extremely interesting for iontronics and related applications, potentially allowing the development of a large variety of sensors, actuators, and energy systems, along with other applications.Finally... the book considers these materials’ adaptable responsiveness and versatility in processing, including additive manufacturing technologies.

  • MXene in Hydrogen Technology

    Unleashing the Power of Two-Dimensional Materials for Clean Energy
    • 1 Edición
    • Pooja Devi + 2 más
    • Inglés
    MXene in Hydrogen Technology: Unleashing the Power of Two-Dimensional Materials for Clean Energy offers a thorough exploration of how MXenes can address major challenges in hydrogen production, storage, and fuel cells. Drawing on insights from leading experts, the book provides a comprehensive overview of MXene structures, properties, and their catalytic roles, making it an essential resource for students, researchers, and professionals seeking practical knowledge in green hydrogen technologies. Beyond foundational concepts, the book delves into application-specific details including electro-catalytic and photo-catalytic hydrogen generation, material requirements for hydrogen storage, and the integration of MXenes with metal hydrides and fuel cells.Readers gain practical insights through real-world case studies and learn about cutting-edge topics such as life cycle assessment, techno-economic analysis, environmental impact, and the use of machine learning for material performance prediction. Each chapter systematically details the latest advances, making this volume a unique reference for accelerating progress toward a sustainable, hydrogen-powered future.

  • Therapeutic Applications of Phytoconstituent Nanomedicines

    • 1 Edición
    • Prashant Kesharwani
    • Inglés
    Therapeutic Applications of Phytoconstituent Nanomedicines provides an overview of the development of phytoconstituents and nano-phytoconstituen... as a leading therapeutic agent in the management of various diseases. This book reviews the mechanisms and properties of phytoconstituents while also describing recent developments in emerging drug delivery systems derived from nanotechnology. The content will help readers design and develop novel nano-drug delivery systems and devices for the delivery of phytoconstituents, while also providing insights and analysis of regulatory and clinical aspects. It will be a useful reference for researchers in the fields of materials science, pharmaceutical science, tissue engineering, and nanotechnology.

  • Bamboo Fiber-Reinforced Composites

    Fabrication, Performance, Sustainability and Applications
    • 1 Edición
    • Md Zillur Rahman + 2 más
    • Inglés
    Bamboo Fiber-reinforced Composites: Fabrication, Performance, Sustainability and Applications extensively covers the classifications, basic structure, compositions, extraction, morphology, processing and surface modification, and properties of various types of bamboo fibers. It also delves into the processing, fabrication, characterizations, and diverse applications of multifunctional composites consisting of bamboo fibers and their diverse matrices (thermoplastics, thermosets, elastomers, biopolymers, geopolymers, biodegradable polymers and concrete), along with their applications in aerospace, automotive, sports equipment, medical devices, wind turbines, infrastructure, water purification, piezoresistive sensors, fire retardants, EMI shielding, and eco-friendly packaging.Finally, the book also addresses significant issues and emerging challenges related to bamboo fiber composites, including manufacturing, processing parameters, dimensional stability, and sustainability.

  • 3D Printing in Materials Engineering

    Recent Developments and Future Perspectives
    • 1 Edición
    • Sayan Ganguly + 2 más
    • Inglés
    From aerospace to medicine, 3D printing is poised to reshape the future of manufacturing in many industries. Additive manufacturing is a game-changing technology that will in the future drastically alter the product development, manufacturing, and distribution processes. 3D Printing in Materials Engineering presents the latest developments in this important field. The book covers the fundamentals, materials, types of 3D printing techniques, and their multi-dimensional applicability over various engineering applications. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, chemists, and other professionals who are working with 3D printing over various engineering applications.

  • Copper Oxides and Related Materials

    Properties, Synthesis, and Applications
    • 1 Edición
    • Suresh Sagadevan + 2 más
    • Inglés
    Copper Oxides and Related Materials: Properties, Synthesis, and Applications provides a thorough description of the physical, structural, electrophysical, chemical, electronic, and biological properties of copper oxides in one convenient volume. The book focuses on human and environmental aspects, paying particular attention to health, environmental remediation, electronic applications, energy storage, and solar energy conversion.Copper oxides are widely used in many applications such as antibacterial, antimicrobial, and anticancer treatments; as biocide agents against phytopathogens or hospital-acquired diseases; and, they are also a standard material used for superconductivity. This volume thoroughly explores the most exciting and relevant applications of copper oxides, a class of material with a sometimes bewilderingly wide array of potential uses.

  • Precision Ultrasonic Measurement of Lubricant Film Thickness

    Theory, Compensation, and Application
    • 1 Edición
    • Pan Dou + 4 más
    • Inglés
    Precision Ultrasonic Measurement of Lubricant Film Thickness: Theory, Compensation, and Application offers a comprehensive scientific reference for researchers, engineers, and students interested in tribology, mechanical engineering, and machine condition monitoring. The book addresses the increasing demand for accurate, in situ monitoring of lubrication film thickness in critical machinery, a key factor in reliability and predictive maintenance. Integrating acoustics, signal analysis, and multiphysics modeling, this book provides a systematic, multidisciplinary resource in the field.The contents span fundamental principles, ultrasonic system design, multilayer and thin-film measurement models, calibration and compensation strategies, and advanced signal processing. Readers are guided through practical engineering case studies, including sliding and rolling bearings, fuel pumps, hydropower generator bearings, and wind turbine pitch bearings. Each chapter provides theoretical background, experimental validation, and actionable methodologies for both laboratory and industrial environments.This book equips its readers with the knowledge to implement high-precision measurement systems, address practical engineering challenges, and translate laboratory advances into robust industrial solutions. It supports academic research, industrial innovation, and the development of next-generation condition monitoring and maintenance strategies.

  • Carbon Materials and Technologies for Energy, Medical and Environmental Sustainability Applications

    • 1 Edición
    • Mudasir Ahmad + 1 más
    • Inglés
    Carbon Materials and Technologies for Energy, Medical and Environmental Sustainability Applications provides a thorough exploration of carbon-based materials, emphasizing their synthesis, structural characteristics, and functional mechanisms. It examines their multifaceted applications in environmental remediation, including water purification and electromagnetic wave absorption. By integrating insights from various scientific disciplines, this textbook highlights recent advancements and identifies future challenges within the field. Designed for researchers, advanced-level students, and industry professionals, this resource aims to enhance understanding and stimulate innovation in nanotechnology.This book will serve as a critical reference for developing sustainable solutions to contemporary global challenges, positioning carbon nanomaterials at the forefront of environmental and energy research.

  • Smart Multifunctional Coatings for Corrosion Detection and Treatment

    • 1 Edición
    • Ananthakumar Ramadoss + 3 más
    • Inglés
    Smart Multifunctional Coatings for Corrosion Detection and Treatment investigates the impact smart multifunctional coatings in corrosion sensing, self-healing, superhydrophobic, anti-fouling, and self-cleaning applications. The book focuses on smart multifunctional materials, their special synthesis techniques, applications, and commercial challenges, and provides a comprehensive analysis of smart materials-based coatings, from the fundamentals to industrial-scale exploratory research. The book sets out the components and performance-governin... parameters of multiple applications of smart coatings, identifying the challenges, trends and limitations involved in their implementation. It is ideal for advanced students and research scholars, as well as industry professionals working in sustainable coatings for various fields, including textiles and the automobile industry.

  • Functionalization and Surface Science of Nanostructured Materials

    • 1 Edición
    • Niroj Kumar Sahu + 2 más
    • Inglés
    Functionalization and Surface Science of Nanostructured Materials brings together cutting-edge techniques and strategies for surface functionalization of nanomaterials, supporting a range of novel applications. The book begins by presenting the fundamentals of surface science of nanostructured materials, introducing chemistry, physics, analysis, strategies, and fundamental methods. This is followed by detailed chapters focusing on simulation and theory, analytical tools, and novel strategies for fabrication, stabilization of nanostructures, and ligand exchange for hydrophilicity. Subsequent chapters provide in-depth coverage of applications across engineering, diagnostics, therapeutics, photovoltaics, photocatalysts, supercapacitors, and water treatment.This book will be of interest to all those with an interest in surface functionalization of nanomaterials for advanced applications, including researchers, advanced students, scientists, engineers, and R&D professionals.

  • Green Metal Nanoparticles for Biomedical and Pharmaceutical Applications

    • 1 Edición
    • Hamed Barabadi + 1 más
    • Inglés
    Green Metal Nanoparticles for Biomedical and Pharmaceutical Applications provides an overview of the synthesis, applications, and safety considerations of environmentally synthesized metal nanoparticles in healthcare. This book covers principles of green synthesis, including biogenic methods using natural sources, and advanced techniques for nanoparticle characterization. The role of sustainable nanoparticles in drug delivery, wound healing, diagnostics, and therapeutics is discussed, offering novel treatment options for diseases such as cancer and infections. Later chapters address toxicological assessments, regulatory frameworks, and challenges in scaling production and ensuring safety, helping minimize risks in clinical and R&D settings. Ethical issues and future developments, including the use of artificial intelligence to optimize processes, are also considered. “Green Metal Nanoparticles for Biomedical and Pharmaceutical Applications" is of interest to researchers and academics in materials science, nanotechnology, pharmaceutical sciences, pharmacy, and green chemistry, as well as clinicians and R&D groups exploring novel materials and therapies.

  • Carbon Quantum Dots as Carriers for Cancer Therapy

    • 1 Edición
    • N.K Jain + 1 más
    • Inglés
    Carbon Quantum Dots as Carriers for Cancer Therapy provides an in-depth overview of advancements in CQD synthesis, characterization, and applications in cancer drug delivery and therapy. The book details the unique chemical, physical, and optical properties of CQDs, assessing their benefits and challenges in oncology. With applications across various cancer tissue types, this book explores innovative drug delivery and therapeutic strategies aimed at improving treatment outcomes, enabling readers to make informed decisions in materials selection for cancer research and therapy. It will be of interest to academics and researchers in materials science, biomaterials, materials chemistry, cancer research, and pharmaceutical sciences.

  • Wood-Based Composites

    Chemistry, Design Formulations, Properties and Applications
    • 1 Edición
    • Md Zillur Rahman + 1 más
    • Inglés
    Wood-Based Composites: Chemistry, Design Formulations, Properties and Applications covers the chemistry, structure, design formulations, processing and engineering, surface treatment, and properties of wood, along with the processing, fabrication, characterization, and diverse applications of multifunctional wood-based composites. With an international author base of renowned subject experts from around the globe, the book provides a cutting-edge overview of various topics, including recent advancements in production, modification, characterization, and applications of distinct wood-based composites.The book will be a valuable reference resource for academic and industrial researchers, as well as materials scientists who are looking to familiarize themselves with the current state-of-the-art and emerging research trends in the development of multifunctional wood-based composites, as well as their fabrication, properties, and performance evaluations for various types of applications.

  • Chalcogenide Nanoparticles

    From Synthesis to Environmental Applications
    • 1 Edición
    • Sabu Thomas + 2 más
    • Inglés
    Chalcogenide Nanoparticles: From Synthesis to Environmental Applications provides a comprehensive overview of the synthesis techniques, characterization methods, and properties of chalcogenides-based nanomaterials. The book covers both fundamental principles and advanced topics, making it suitable for researchers, students, and professionals seeking a thorough understanding of the subject. In addition, it features detailed methodologies and case studies on the microbial synthesis of chalcogenide nanoparticles, highlighting innovative and eco-friendly production techniques. Their applications in environmental remediation, including water purification, in organic contaminants degradation, wastewater treatment including bacterial disinfection, heavy metal reduction and ions removal, metal sensing are also covered.By covering the fundamentals, it provides a strong foundation for those new to the field. Sections on microbial synthesis and novel bioconversions offer insights into cutting-edge, sustainable production methods, making it relevant for researchers and practitioners seeking eco-friendly alternatives. The environmental applications chapters are particularly valuable for those looking to apply chalcogenide nanoparticles in practical, real-world scenarios, providing both theoretical and practical knowledge.

  • Advanced Friction Composites for Braking Systems

    Formulation, Manufacturing, Testing and Applications
    • 1 Edición
    • Vijay Raghunathan + 4 más
    • Inglés
    Advanced Friction Composites for Braking Systems: Formulation, Manufacturing, Testing and Applications delves into the development and characterization of friction composites, addressing their formulation, manufacturing processes, and testing methodologies. The primary objectives of the book are to explore recent advancements and technological innovations in this important field, focusing on materials, development processes, and testing standards. The significance of the topic lies in the growing demand for high-performance friction materials in the automotive industry and the need to comply with environmental regulations banning asbestos and copper. The book is structured to introduce the basics of friction composites, including their historical development, followed by detailed chapters on the various ingredients used in their formulations, such as fillers, binders, fibers, and friction modifiers. It then explores the manufacturing processes and various testing protocols to ensure the composites meet the required standards. Additionally, the book will feature case studies, analytical approaches, and a global market survey to provide a comprehensive understanding of the industry's current and future trends.The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, industrial R&D, manufacturers, and other professionals specializing in advanced friction composites for braking systems.

  • Basalt Fiber Reinforced Composites

    Fundamentals, Properties and Applications
    • 1 Edición
    • Md Zillur Rahman + 2 más
    • Inglés
    Basalt Fiber Reinforced Composites: Fundamentals, Properties and Applications provides a comprehensive, up-to-date resource on the fundamentals, manufacturing, properties, and diverse applications of these materials. The book covers the chemical composition, extraction, manufacturing, surface modification, functionalization, morphology, and properties of basalt fibers. It also delves into the processing, fabrication, characterization, and diverse applications of multifunctional composites consisting of basalt fibers and a diverse range of matrices, including thermoplastics, thermosets, geopolymers, and concrete.With an international author base from across the globe, the chapters provide a cutting-edge overview of recent advancements in production, modification, characteristics, and uses of these materials. The book will be a valuable reference resource for academic and industrial researchers who want to familiarize themselves with the current state-of-the-art and emerging research trends in this important field. It will assist them in finding solutions to both fundamental and applied problems within their chosen research areas.

  • Techniques and Protocols for Evaluating Nanosystems

    From Design and Development to Biological Applications
    • 1 Edición
    • Natassa Pippa + 1 más
    • Inglés
    Techniques and Protocols for Evaluating Nanosystems: From Design and Development to Biological Applications is a comprehensive guide on the main techniques used in the characterization of nanoparticulate systems. Covering a wide range of techniques such as thermal analysis, imaging, light scattering, analytical, optical spectroscopic, and statistical and AI-based optimization techniques, the book provides a thorough explanations of each technique, highlighting their advantages and limitations and providing characterization protocols and case studies for their application. Special attention is given to the regulatory and pharmaceutical industry requirements.This book offers researchers and advanced students a valuable resource on application of these techniques in the fields of nanotechnology, pharmaceutical technology, and chemical engineering.

  • Carbohydrate Functional Coatings

    Fundamentals and Applications
    • 1 Edición
    • Varaprasad Kokkarachedu + 1 más
    • Inglés
    Carbohydrate Functional Coatings: Fundamentals and Applications provides a detailed overview of how carbohydrate coatings can be functionalized to enhance their properties, including anti-microbial, antioxidant, anti-corrosive, and fire-resistant features, thus making them suitable for diverse applications. The book begins with fundamental concepts about carbohydrates, including their sources and classifications. It then discusses essential methods for applying these coatings and the techniques used to measure their effectiveness. Following sections highlight specific applications across various industries, such as food, agriculture, biomedicine, textiles, and building materials.In addition, the content addresses challenges in the field and explores future directions for research and development, including the role of carbohydrate coatings in promoting sustainability and their potential environmental impacts. This book is a valuable resource for researchers, scientists, and advanced students who want to learn about the unique properties and applications of carbohydrate coatings, as well as the latest advancements in the field.

  • Mxene-Based Materials for Advanced Water and Wastewater Purification

    • 1 Edición
    • Mohammad Hadi Dehghani + 2 más
    • Inglés
    Mxene-based Materials for Advanced Water and Wastewater Purification provides a comprehensive overview of the preparation methods, characterization, and diverse environmental applications of MXene-based materials. Beginning with foundational concepts, the book discusses the unique properties and fabrication techniques of MXenes and their composites. The following chapters focus on the use of MXene-based adsorbents, photocatalysts, and membranes for removing a wide range of contaminants from water and wastewater, such as heavy metals, radionuclides, dyes, pharmaceuticals, pesticides, and phenolic compounds. MXene’s antibacterial and anti-biofouling properties are also discussed, along with their potential in environmental remediation. The book also covers toxicity and hazard assessments, sensor technologies for pollutant detection, regeneration and reuse of MXene materials, and their integration into hybrid treatment systems. It concludes with a thorough discussion on scale-up applications, environmental fate and lifecycle assessments, and regulatory and policy considerations. This book is a valuable resource for researchers, engineers, and policymakers interested in advanced nanomaterials for sustainable environmental applications.

  • Multifunctional Composite Coatings

    Sustainable Nano-coatings and Advanced Innovations
    • 1 Edición
    • Rotimi Sadiku + 2 más
    • Inglés
    Multifunctional Composite Coatings: Sustainable Nano-Coatings and Advanced Innovations discusses the latest advances in this important field. The book explores the integration of nanomaterials into polymer matrices to enhance the performance of coatings and adhesives. It covers the latest technological developments and innovations in composite coatings. It addresses the various properties of these coatings, such as hardness, electrical conductivity, resistance to high temperatures, and protection from environmental factors. Emphasis is placed on the design, processing, characterization, and applications of multifunctional composite coatings. It will be a valuable reference resource for researchers, as well as materials scientists and engineers, providing an in-depth understanding of the compatibility and functionality of nanomaterials and their use in coating applications.

  • Chemistry of High-Energy Biopolymer-Based Nanocomposites

    • 1 Edición
    • Sabu Thomas + 2 más
    • Inglés
    Chemistry of High-Energy Biopolymer-Based Nanocomposites brings together the latest research in energy-rich and high-energy nanocomposites based on polysaccharide- and other biopolymer-based fillers with synthetic polymers, examining chemistry, properties, preparation and advanced applications. The book begins by explaining the fundamentals of bionanocomposites, the use of cellulose, cellulose derivatives, and lignocellulose as fillers, the chemistry of energy-rich polymer bionanocomposites, and the design of composite architectures. Innovative methods in chemical modification, characterization, and analysis, are then presented in detail, including scattering studies, Fourier infra-red spectroscopy, thermogravimetric analysis, differential scanning calorimetry, mechanical properties, microscopy studies, and rheological studies.This is followed by chapters focusing on specific properties and cutting-edge areas of application, including fire retardancy, electro properties, capacitors for energy storage, and cellulose and synthetic polymer blends as nanocomposites for auxiliary solid fuel. Finally, the book reviews recycling of biopolymer-based nanocomposites, the energy rich concept driving the bionanocomposites approach, and future perspectives and outlook.

  • Nanomaterial Perovskite Oxide and Halide Catalysts

    Applications in Sustainable Catalytic Processes
    • 1 Edición
    • Peter R. Makgwane + 3 más
    • Inglés
    Nanomaterial Perovskite Oxide and Halide Catalysts: Applications in Sustainable Catalytic Processes delivers a comprehensive introduction to the dynamic world of perovskite-based nanomaterials, emphasizing their use as highly effective catalysts. The book is structured into four well-defined sections, beginning with an accessible overview of fundamental concepts, material properties, synthesis techniques, and innovative design approaches. Readers are guided through the essential processes that underpin the development of these advanced materials, providing a solid foundation for understanding their significance in modern science and technology. This resource is invaluable for those seeking to deepen their knowledge of perovskite nanomaterials and their catalytic capabilities.The following chapters highlight perovskite-based catalysts in energy-related applications, including fuel cells, batteries, supercapacitors, and chemical conversion reactions. The book further explores their contribution to chemical conversion processes and environmental solutions such as pollution control, water purification, and advanced sensing technologies. By offering key strategies for designing nanomaterials with enhanced structural qualities, it serves as an essential guide for researchers and professionals in materials science, environmental science, renewable energy, and chemical engineering.

  • Sustainable Nanofillers

    Fundamentals, Synthesis, and Applications
    • 1 Edición
    • Shadpour Mallakpour + 1 más
    • Inglés
    Sustainable Nanofillers: Fundamentals, Synthesis, and Applications covers the latest advances in sustainable nanofillers, presenting fundamental concepts, state-of-the-art techniques, enhanced properties and novel applications. The book explains essential theoretical aspects, key concepts and methods for synthesis and fabrication. Sections provide coverage of sustainable nanofillers for a wide range of innovative applications, including in pharmaceuticals, biomedicine, drug delivery, environment, oils, lubricants, and fuels, rubber and tires, catalysis, antibacterial and antifungal coatings, textiles, bioactive materials, food and food packaging, and household goods. Final sections offer information on environmental, legal and health and safety issues, approaches to commercialization and standardization, and future opportunities. This is a valuable resource for researchers and advanced students across nanotechnology, polymer science, chemistry, sustainable materials, chemical engineering, and materials science, as well as for scientists, engineers, and R&D professionals with an interest in sustainable nanofillers for a range of industrial applications.

  • Ion Irradiation in Emerging Materials and Devices

    From Fundamentals to Advanced Applications
    • 1 Edición
    • Vishnu Chauhan + 3 más
    • Inglés
    Ion Irradiation in Emerging Materials and Devices: From Fundamentals to Advanced Applications presents new paradigms in the modification of both existing materials and the discovery of new materials by modifying materials at specific locations at the nanoscale. The book explores the effects of ion irradiation on different materials and devices and describes the resultant modifications in their structural, electrical, morphological, optical, and magnetic properties. It also provides an assessment of device performance and a comprehensive literature review. Thorough examination of ion beam-induced synthesis and characterization of various materials is included, along with reports of recent advances in materials modification through radiation, a promising technique for creating materials better suited for a range of specific applications.Lastly, the book highlights new materials, showcasing promising technologies and enhanced properties. This book will appeal to new and early career researchers as it examines the work done in the field of ion implantation over the past few decades while also proposing potential new areas of research and their applications.

  • Data-Driven Developments of Entropic Materials under Extreme Conditions

    • 1 Edición
    • Yong Zhang
    • Inglés
    Data-Driven Developments of Entropic Materials Under Extreme Conditions is a unique resource that offers readers an up-to-date understanding of data-driven design and development of entropic materials, including their behavior in extreme states. Drawing on examples and current research, the book covers the use of advanced data science in the development of high-entropy alloys, the dynamic behavior of entropic materials, and the development of entropic materials for nuclear, cryogenic, and high temperature applications.

  • Bio-joining

    Adhesion in Biomaterials, Biological Adhesives, and Biomimetic Adhesive Systems
    • 1 Edición
    • Lucas F. M. da Silva + 4 más
    • Inglés
    Bio-joining: Adhesion in Biomaterials, Biological adhesives, and Biomimetic Adhesive Systems explores the use of adhesives in biomedical applications, with a focus on sustainable development. This book introduces the core concepts of adhesive bonding and the different types of biological adhesives, before reviewing applications in dentistry and joint design and engineering. Biodegradability, sustainability, and degradation impact of bioadhesives are recurring themes throughout each chapter, with an emphasis on development and engineering of natural materials. This book is of interest to researchers, engineers and academics working in the fields of materials science, biomedical engineering, and orthopaedics, with a focus on bio-joining and joint development.

  • Green Synthesized Nanofillers for Smart Polymer Composites

    Synthesis, Properties and Applications
    • 1 Edición
    • Srikanta Moharana + 3 más
    • Inglés
    Green Synthesized Nanofillers for Smart Polymer Composites: Synthesis, Properties and Applications provides a precise and extensive review of green chemistry mediated synthesis for various types of nanofillers and their use in hybrid polymer nanocomposites. Emphasis is placed on their properties, characterization, and practical use in a broad range of different technological applications. This book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, chemists, and manufacturers who are working in the development of green polymer nanocomposites and their related applications.

  • Nanocellulose for Sustainable Water and Wastewater Treatments

    • 1 Edición
    • Ahmad Ilyas Rushdan + 4 más
    • Inglés
    Nanocellulose for Sustainable Water and Wastewater Treatments provides a comprehensive overview of the role of nanocellulose in addressing challenges in water and wastewater treatment by discussing its fundamental properties, synthesis, modification, and applications in various treatment processes. Structured into four parts, the book begins with an overview of nanocellulose, including its classification, sources, and properties, as well as methods for its synthesis and modification. Following sections review the application of nanocellulose in water treatment processes, such as flocculation, filtration, photocatalysis, and pollutant detection, as well as its use in treating wastewater, including industrial and oily wastewater.The final section focuses on sustainable practices and environmental impacts, thoroughly covering the recycling and reusability of nanocellulose, lifecycle assessments, and future advancements in nanocellulose technologies for water and wastewater treatment. This book is a valuable resource for researchers, scientists, and industry professionals interested in the sustainable use of nanocellulose in water treatment, providing insights into state-of-the-art research and advancements in the field.

  • Nanomaterials in Membrane and Advanced Material Technologies

    Innovations and Applications
    • 1 Edición
    • Fatma Yalcinkaya + 2 más
    • Inglés
    Nanomaterials in Membrane and Advanced Material Technologies explores the combination of membranes with the unique properties of nanomaterials, providing a clear, detailed look at the advancements, challenges, and potential uses of this technology in various industries. Starting with a foundational introduction, the book reviews the fundamentals of membrane technology and the properties of nanomaterials, from carbon-based and metallic nanoparticles to polymeric and hybrid structures. It then discusses the fabrication and characterization techniques of nanomaterial-enhance... membranes, followed by a thorough analysis of their roles in different filtration processes such as microfiltration, nanofiltration, ultrafiltration, reverse osmosis, gas separation, and electro-membrane processes.The book also looks at the environmental impacts, safety concerns, and regulatory issues related to these technologies, ensuring a full understanding of their impact. This is an essential resource for researchers, materials scientists, engineers, and professionals in the fields of membrane technology, environmental science, and sustainability.

  • An Overview of X-ray Analysis Technology

    • 1 Edición
    • Wu Ruizhi + 1 más
    • Inglés
    An Overview of X-ray Analysis Technology introduces the basic theoretical knowledge of X-ray physics, X-ray diffraction direction and intensity, polycrystalline X-ray diffraction analysis, etc. Various X-ray techniques commonly used in current scientific research are introduced in the book, including the use of X-ray diffraction technology to analyze the phase, residual stress, grain size, dislocation density, texture, etc. of materials, as well as the use of X-ray photoelectron spectroscopy to analyze the types and contents of surface elements of materials. The book also introduces the three-dimensional X-ray microscopy analysis method developed in recent years based on electronic computed tomography technology. Thee technologies covered introduce basic principles, methods, experimental operations, and case analysis.

  • Nanocellulose for Water Purification

    Advancements, Applications, and Environmental Impact
    • 1 Edición
    • Sabu Thomas + 3 más
    • Inglés
    Nanocellulose for Water Purification: Advancements, Applications, and Environmental Impact provides a comprehensive overview on the properties, modifications, and applications of nanocellulose-based materials for addressing water pollution. Initial chapters introduce the fundamental aspects of nanocellulose, including its origin, characteristics, and properties, while subsequent chapters discuss surface functionalization and modification techniques that improve the adsorption capabilities of nanocellulose. Next, readers will find an overview of the different forms of nanocellulose-based adsorbents, such as films, membranes, hydrogels, and aerogels, highlighting their effectiveness in removing various pollutants, including agrochemicals, organic solvents, cationic and anionic dyes, heavy metals, lipids, and pharmaceutical contaminants.The final chapters address the environmental and economic implications of nanocellulose advancements in water purification technologies and discuss the challenges and future directions in the field. This book serves as an important resource for researchers and industry professionals in nanotechnology, materials science, polymer science, environmental engineering, and chemical engineering, providing detailed information on the innovative use of nanocellulose in water treatment applications.

Temas relacionados