Saltar al contenido principal
Elsevier

Libros en Ciencia de Materiales

  • Adsorption of Metals by Geomedia

    Variables, Mechanisms, and Model Applications
    • 1 Edición
    • Everett Jenne
    • Inglés
    Adsorption of Metals by Geomedia, serves as a needed resource for this topic which has received much attention during the past 15 years. The book provides an in-depth review of the field, followed by numerouschapters that document the current status of adsorption research for a variety of metals by geomedia ranging from individual minerals to sediments and soils. Adsorption mechanisms are detailed and precipitation is presented as a distinct sorption process.Virtually all factors affecting the extent of metal adsorption are examined, including the effects of selected anions, competition among metals, pH, metal concentration, loading, variable metal adsorption capacity, ionic strength, hydrogen exchange and stoichiometry, and solids concentration. A variety of adsorption models are briefly presented and some are used to extend laboratory studies to field sites. The book is comprised of a collection of papers contributed by leading investigators from Canada, France, the Netherlands, the United Kingdom and the US.

  • Damage Mechanics in Engineering Materials

    • 1 Edición
    • Volumen 46
    • Jiann-Wen Woody Ju + 2 más
    • Inglés
    This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micro... constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.

  • High Brightness Light Emitting Diodes

    • 1 Edición
    • Volumen 48
    • Inglés
    Volume 48in the Semiconductors and Semimetals series discusses the physics and chemistry of electronic materials, a subject of growing practical importance in the semiconductor devices industry. The contributors discuss the current state of knowledge and provide insight into future developments of this important field.

  • Fire Retardancy of Polymers

    The Use of Intumescence
    • 1 Edición
    • M Le Bras + 3 más
    • Inglés
    Covers the following topics: Strategies; Intumescence: Mechanism studies; New intumescent polymetric materials; Flame retarded intumescent textiles; Intumescence - an environmentally friendly process?

  • Handbook of Plastics Joining

    A Practical Guide
    • 1 Edición
    • PDL PDL Staff
    • Inglés
    A hands-on guide to choosing and using old and new technologies for joining plastics and elastomers. Includes detailed discussions of over 25 techniques used to join plastics to themselves and to other materials. Advantages and disadvantages of each technique along with detailed discussions of applications are presented. A second section is organized by material and provides details of using different processes with over 50 generic families of plastics and how different techniques and operating parameters affect weld strength and other criteria. This book is an excellent reference and an invaluable resource for novice and expert alike in determining the best joining technique for their application and providing guidance in how to design and prepare for production.

  • Magnetic Ultra Thin Films, Multilayers and Surfaces

    • 1 Edición
    • Volumen 62
    • F. Petroff + 1 más
    • Inglés
    The Symposium on Magnetic Ultrathin Films, Multilayers andSurfaces, hosted by the European Materials Research Society, washeld at the Palais de la Musique et des Congré inStrasbourg, France on June 4-7, 1996. Its central theme was therelationship of magnetic properties and device performance tostructure at the nano and micrometer length scale. Research onthe magnetism of surfaces, ultrathin films and multilayers hasincreased dramatically during recent years. This development wastriggered by the discovery of coupling between ferromagneticlayers across nonmagnetic spacer layers and of the giantmagnetoresistan... effect in systems of reduced dimension usingvarious micro and nanofabrication techniques has become a subjectof special interest. It is certainly the promising applicationpotential of these effects in new magnetic recording devicegeometries which causes this intensive research, which is doneboth by companies and at universities and researchinstitutes.A selection of invited and contributed paperspresented at the Symposium and accepted for publication iscontained in this volume. The contents of these proceedings areorganized into seven sections.A. Nanowires, Nanoparticles,Nanost... Ultrathin Films and Surfaces,Characteriz... Giant MagnetoresistanceD. Coupling,TunnelingE. Growth, Structure, MagnetismF. Growth,Structure, MagnetoresistanceG. Coupling, Magnetic processes,Magneto-op... first four sections contain invited andoral contributed papers in the listed research domains, while thelast three sections contain the contributions presented duringthree large poster sessions.

  • Advanced Materials for Interconnections

    • 1 Edición
    • Volumen 66
    • Th. Gessner
    • Inglés
    The conference "Advanced Materials for Interconnections" took place in Strasbourg on 4-7 June 1996 hosted by the EMRS Society. Based on the recent trends in microelectronics the main topics of the conference were new materials for interconnects like special aluminum alloys, tungsten and copper as well as low k dielectric materials.64 Papers were presented at the conference and 51 of these are contained as full length papers within this volume of Microelectronic Engineering.The proceedings are divided into 5 chapters. Chapter 1 related to Metallization discusses cluster equipment for IC manufacturing, copper advanced technology, gap filling, mechanical reliability, deposition technology, electroless and electro-plating, copper metallization copper interconnects and patterning of aluminum. Chapter 2, Process Integration, discusses multilevel interconnect, study on thin-film SOI devices, wet cleanings, influence of material characteristics and deposition processes, copper contamination and metallization, plasma behaviour, CMP processes, sub-micron inverse metallisation, interconnect formation and mechanical polishing investigations. Chapter 3 covers Barriers, and chapter 4 studies, evaluates and monitors Dielectrics. The final chapter looks at modelling comparisons.

  • Group IV Heterostructures, Physics and Devices (Si, Ge, C, Sn)

    • 1 Edición
    • Volumen 61
    • J.-M. Lourtioz + 2 más
    • Inglés
    These proceedings contain the majority of papers presented atSymposium D, "Group IV heterostructures, physics and devices(Si,Ge,C,&... of the Spring Meeting of the EuropeanMaterials Research Society, held at the Congress Centre,Strasbourg, France, 4-7 June 1996. This Symposium was attendedby about 150 scientists from throughout the world, among whom 18were invited speakers.The aim of the Symposium was to discussthe most recent results in all fields of Group IVheterostructures and devices from fundamental physics toindustrial applications. Regular and invited contributions werethen welcomed which addressed the different aspects of growth,the effects of strain relaxation, particularly in SiGeC alloys,the basic optical and electrical properties of heterostructuresand low-dimensional structures, the microelectronic andoptoelectronics, such as rare-earth doping techniques, was alsoselected. Except for minor changes, the order of papers presentedin this special issue of Thin Solid Films closely follows theorder of topics listed above as well as the order of sessions atthe Symposium.

  • Metal and Ceramic Based Composites

    • 1 Edición
    • Volumen 12
    • S.T. Mileiko
    • Inglés
    Modern scientific and technological fields are frequently of an interdisciplinary nature, and the field of fibrous composites is no exception. Unlike fibre-reinforced plastics, the family of metal- and ceramic-based composites is still quite a new group of materials with a large variety of mechanical and physical properties. Up until now it has been difficult to produce these materials as the necessary technical information has not been well documented.The main purpose of this book is to link together fabrication, structure and properties chains, so as to clarify which structure provides the necessary properties, and how one can attain the correct composite structure. To this end, the book not only contains topics of a purely technical nature, but also a description of the failure mechanics of metal- and ceramic-matrix composites, as this is the key to understanding the structure-properties segment of the chain mentioned.The book is divided into three parts. Part I presents a general view of composites with the accent on metal- and ceramic-matrix composites. It also contains a brief description of modern fibres and composites and can be considered, at least for beginners, as a starting point for further study. Part II looks at the composite microstructures considered to be either optimal or reasonable in resisting a particular loading. Finally Part II describes a variety of mechanical, physical, and chemical potential for organizing these microstructures. Experimental data on technologies, material structures, and material properties are used throughout the book to support theoretical conclusions or to obtain important physical parameters.

  • Uncooled Infrared Imaging Arrays and Systems

    • 1 Edición
    • Volumen 47
    • Inglés
    This is the first book to describe an emerging but already growing technology of thermal imaging based on uncooled infrared imaging arrays and systems, which are the most exciting new developments in infrared technology today. This technology is of great importance to developers and users of thermal images for military and commercial applications. The chapters, prepared by world leaders in the technology, describe not only the mainstream efforts, but also exciting new approaches and fundamental limits applicable to all.

  • Partial Cumulative Index

    Cumulative Index
    • 1 Edición
    • Volumen 100
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.Volume 100 is a cumulative index for all in-print volumes of Advances in Electronics and Electron Physics (Volumes 63–89), Advances in Imaging & Electron Physics (Volumes 90–99), and Advances in Optical & Electron Microscopy(Volumes 1–14).

  • Flow-Induced Alignment in Composite Materials

    • 1 Edición
    • T.D. Papathanasiou + 1 más
    • Inglés
    The purpose of aligning short fibres in a fibre-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibres, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material.Flow induced alignment in composite materials details, in a single volume, the science, processing, applications, characterisation and properties of composite materials reinforced with short fibres that have been orientated in a preferred direction by flows arising during processing. The topics discussed include fibre alignment and materials rheology; processes that can produce fibre alignment in polymeric, liquid crystal polymeric, and metallic composites; materials characterization and mechanical properties; and modelling of processes and materials properties.The technology of fibre-reinforced composites is continually evolving and this book provides timely and much needed information about this important class of engineering materials. The bookis an essential reference work for industry and an indispensable guide for the research worker, advanced student and materials scientist.

  • Frontiers in Electronics: High Temperature and Large Area Applications

    • 1 Edición
    • Volumen 59
    • Bozzano G Luisa
    • Inglés

  • Synthetic and Stereochemical Aspects

    • 1 Edición
    • Volumen 2
    • Philip Page
    • Inglés
    The impact of organosulfur chemistry, especially in the areas of heterocyclic chemistry, stereocontrolled processes, and asymmetric synthesis, has led to a resurgence of interest in the field. This book is the secondin a series intended to provide coverage of topics of current interest throughout the whole range of organosulfur chemistry. Each volume is comprised of five or six chapters, each consisting of an in-depth, self-contained review in a well-defined area. This volume and its predecessor Organosulfur Chemistry, Synthetic Aspects will prove valuable references for researchers and practitioners in organic chemistry.

  • Bioceramics Volume 10

    • 1 Edición
    • L. Sedel + 1 más
    • Inglés
    Bioceramics 10 contains the proceedings of the 10th International Symposium on Ceramics in Medicine, held in Paris, France, in October 1997. These annual symposia bring together distinguished researchers in the fields of ceramics and medicine to exchange ideas and to discuss recent research results. Bioceramics in medicine has become one of the more important fields of biomaterials. The clinical applications of bioceramics are numerous. In particular in areas such as orthopaedic surgery, dentistry and plastic surgery, but also E.N.T., percutaneous devices and embolisation materials. In addition to the many clinical applications, Bioceramics 10 deals with a range of fundamental subjects in depth. This book will be an essential reference tool for both clinicians, academics and industrial researchers interested in the use of ceramics in medicine. The book will also be of great value to students and lecturers in materials science, biomedical engineering and orthopaedics. This volume contains 140 papers, more than 200 high quality photographs, and both author and keyword indexes.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 102
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Dynamics of Thin Walled Elastic Bodies

    • 1 Edición
    • J. D. Kaplunov + 2 más
    • Inglés
    Written by a well-known group of researchers from Moscow, this book is a study of the asymptotic approximations of the 3-D dynamical equations of elasticity in the case of thin elastic shells of an arbitrary shape. Vibration of shells is a very useful theory in space techniques, submarine detection, and other high-tech domains. Dynamics of Thin Walled Elastic Bodies shows that refined shell theories used in engineering practice give a distorted picture of the high-frequency or non-stationary dynamics of shells, and offers new, mathematically more consistent ways of describing the dynamics of shells.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 101
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Lipid Polymorphism and Membrane Properties

    • 1 Edición
    • Volumen 44
    • Inglés
    The major lipid components of biological membranes can undergo many diverse and fascinating morphological rearrangements. Studies of these diverse phases and the manner in which they are formed tends to alter the properties of ordinary bilayer membranes. This book examines the structural and biological roles of lipids forming non-lamellar structures.

  • From Physics to Devices: Light Emissions in Silicon

    Light Emissions in Silicon: From Physics to Devices
    • 1 Edición
    • Volumen 49
    • Inglés
    Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors.The"Wil... and Beer"Series, as it is widely known, has succeeded in publishing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices,Oxygen in Silicon, and others promise indeed that this tradition will be maintained and even expanded.Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry.

  • Advances in Research and Development

    Modeling of Film Deposition for Microelectronic Applications
    • 1 Edición
    • Volumen 23
    • Inglés
    Significant progress has occurred during the last few years in device technologies and these are surveyed in this new volume. Included are Si/(Si-Ge) heterojunctions for high-speed integrated circuits, Schottky-barrier arrays in Si and Si-Ge alloys for infrared imaging, III-V quantum-well detector structures operated in the heterodyne mode for high-data-rate communications, and III-V heterostructures and quantum-wells for infrared emissions.

  • Functionally Graded Materials 1996

    • 1 Edición
    • I. Shiota + 1 más
    • Inglés
    Since a formulated concept of functionally graded materials (FGMs) was proposed in 1984 as a means of preparing thermal barrier materials, a coordinated research has been developed since 1986. The 125 papers presented here present state of the art research results and developments on FGM from the past decade.A wide spectra of topics are covered including design and modeling, fracture analysis, powder metallurgical processes, deposition and spray processes, reaction forming processes, novel processes, material evaluation for structural applications, organic and intelligent materials. Three reviews associated with national research programs on FGMs promoted in Japan and Germany, and the historical perspective of FGM research in Europe are presented as well.The resulting work is recommended to researchers, engineers and graduate school students in the fields of materials science and engineering, mechanical and medical engineering.

  • Metallurgy of Basic Weld Metal

    • 1 Edición
    • G M Evans + 1 más
    • Inglés
    The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufacturers and aimed at improving the properties of MMA electrodes for high quality applications. It examines the influence of some 17 elements and welding variables on the composition, microstructure and mechanical properties of the resulting weld metal. The often complex relationships discovered are sufficient to give a good understanding of the properties of weld metals produced by other arc welding processes.

  • Composite Sheet Forming

    • 1 Edición
    • Volumen 11
    • D. Bhattacharyya
    • Inglés
    Sheet forming is the most common process used in metal forming and is therefore constantly being adapted or modified to suit the needs of forming composite sheets. Due to the increasing availability of various types of fibre reinforced polymeric sheets, especially with thermoplastic matrices, the scope of use of such materials is rapidly expanding in the automobile, building, sports and other manufacturing industries beyond the traditional areas of aerospace and aircraft applications. This book contains twelve chapters and attempts to cover different aspects of sheet forming including both thermoplastic and thermosetting materials. In view of the expanded role of fibre reinforced composite sheets in the industry, the book also describes some non-traditional applications, processes and analytical techniques involving such materials.The first chapter is a brief introduction to the principles of sheet metal forming. The next two chapters introduce the various forms of materials, manufacturing techniques and the fundamentals of computer simulation. Chapter 4 describes the different aspects of thermoforming of continuous fibre reinforced thermoplastics and the following chapter studies the shear and frictional behaviour of composite sheets during forming. Chapter 6 explores the possibility of applying the grid strain analysis method in continuous fibre reinforced polymeric sheets. The next two chapters address fundamental concepts and recent developments in finite element modelling and rheology. Chapter 9 introduces the theory of bending of thermoplastic composite sheets and shows a novel way of determining both longitudinal and transverse viscosities through vee-bend tests. A significant expansion in the usage of composite materials is taking place in biomedical areas. Chapter 10 discusses the thermoforming of knitted fabric reinforced thermoplastics for load bearing and anisotropic bio-implants. The final chapter introduces roll forming, a commonly used rapid manufacturing process for sheet metals, and discusses the possibility of applying it economically for continuous reinforced thermoplastic sheets.

  • Effect of Disorder and Defects in Ion-Implanted Semiconductors: Electrical and Physiochemical Characterization

    • 1 Edición
    • Volumen 45
    • Inglés
    Defects in ion-implanted semiconductors are important and will likely gain increased importance in the future as annealing temperatures are reduced with successive IC generations. Novel implant approaches, such as MdV implantation, create new types of defects whose origin and annealing characteristics will need to be addressed. Publications in this field mainly focus on the effects of ion implantation on the material and the modification in the implanted layer afterhigh temperature annealing. Electrical and Physicochemical Characterization focuses on the physics of the annealing kinetics of the damaged layer. An overview of characterization tehniques and a critical comparison of the information on annealing kinetics is also presented.

  • Effect of Disorder and Defects in Ion-Implanted Semiconductors: Optical and Photothermal Characterization

    • 1 Edición
    • Volumen 46
    • Inglés
    Defects in ion-implanted semiconductors are important and will likely gain increased importance as annealing temperatures are reduced with successive IC generations. Novel implant approaches, such as MdV implantation, create new types of defects whose origin and annealing characteristics will need to be addressed. Publications in this field mainly focus on the effects of ion implantation on the material and the modification in the implanted layer after high temperature annealing. The editors of this volume and Volume 45 focus on the physics of the annealing kinetics of the damaged layer. An overview of characterization tehniques and a critical comparison of the information on annealing kinetics is also presented.

  • Biomaterials Science

    An Introduction to Materials in Medicine
    • 1 Edición
    • Buddy D. Ratner + 3 más
    • Inglés
    This book introduces a subject that has profound impact on human health and considerable economic importance. The issues addressed include the biology, medical applications, markets, regulation, and ethical issues involved in biomaterials science. This spectrum of issues reflects the interdisciplinary nature of the field.

  • Polymer Colloids

    A Comprehensive Introduction
    • 1 Edición
    • Robert M. Fitch
    • Inglés
    Finally! An authoritative, comprehensive textbook in this commercially and academically important field. Billions of kilograms of polymers are manufactured annually in the form of polymer colloids. Thousands of researchers work with them in a host of applications, from water-borne latex paints to cancer chemotherapeutics, but until now there was been no adequate introductory text.This book provides a solid development of the fundamentals to the field of colloid science with a solid development of the fundamentals of polymer colloids, emulsion, polymerization, latex technology, and the applications of functional latexes in catalysis, medical diagnostics and therapeutics. Fitch, who has been called the Benjamin Spock of Polymer Colloids, bases his approach to a complex field is based on his 40+ years of experience in industrial and academic research and development. His approach makes it easy to understand and be able to work effectively in this fascinating field.Students and professionals will find Polymer Colloids: A Comprehensive Introduction an important resource in gaining a working understanding of polymer colloids, enabling them to carry out their own research and/or development.

  • Handbook of Palladium-Catalysed Organic Reactions

    • 1 Edición
    • J. C. Fiaud + 2 más
    • Inglés
    This comprehensive handbook will be an indispensable research tool for chemists. Handbook of Palladium Catalysed Organic Reactions provides a synoptic description of the main types of reactions which are catalyzed by Palladium and the mechanism which causes these reactions. Each reaction is presented in graphical form and classified according to the type of transformation involved.Other books covering the use of Palladium complexes as catalysts have been written, but the Handbook is the only to offer a synoptic view, showing the catalytic cycle of each reaction. This complete coverage provides the reader with a good understanding of the parameters involved. The tables included can be viewed from the point of view of the reagents, the product of the reaction, or the mechanism involved. The Handbook is a companion to the Database of Palladium Chemistry: Reactions andCatalytic Cycles, published on CD-ROM.

  • Carbon Nanotubes

    • 1 Edición
    • M. Endo + 2 más
    • Inglés
    Carbon nanotubes have been studied extensively in relation to fullerenes, and together with fullerenes have opened a new science and technology field on nano scale materials.A whole range of issues from the preparation, structure, properties and observation of quantum effects in carbon nanotubes in comparison with 0-D fullerenes are discussed.In addition, complementary reviews on carbon nanoparticles such as carbon nano-capsules, onion-like graphite particles and metal-coated fullerenes are covered.This book aims to cover recent research and development in this area, and so provide a convenient reference tool for all researchers in this field. It is also hoped that this book can serve to stimulate future work on carbon nanotubes.

  • Olefin Metathesis and Metathesis Polymerization

    • 2 Edición
    • K. J. Ivin + 1 más
    • Inglés
    This book is a follow-up to Ivins Olefin Metathesis, (Academic Press, 1983). Bringing the standard text in the field up to date, this Second Edition is a result of rapid growth in the field, sparked by the discovery of numerous well-defined metal carbene complexes that can act as very efficient initiators of all types of olefin metathesis reaction, including ring-closing metathesis of acyclic dienes, enynes, and dienynes; ring-opening metathesis polymerizationof cycloalkenes, acyclic diene metathesis polymerization; and polymerization of alkynes, as well as simple olefin metathesis. Olefin Metathesis and Metathesis Polymerization provides a broad, up-to-date account of the subject from its beginnings in 1957 to the latest applications in organic synthesis. The book follows the same format as the original, making it useful toteachers and to researchers, and will be of particular interest to those working in the fields of organic chemistry, polymer chemistry, organometallic chemistry, catalysis, materials science and chemical engineering.

  • Liquid Moulding Technologies

    Resin Transfer Moulding, Structural Reaction Injection Moulding and Related Processing Techniques
    • 1 Edición
    • C D Rudd + 3 más
    • Inglés
    Liquid moulding technologies such as RTM and SRIM are increasingly used for manufacturing composites in a variety of industries. Most interest stems from the automotive industry in the continuing search for weight savings, manufacturing economies and vehicle refinement.Liquid Moulding Technologies provides a unique insight into the development and use of such processes with a comprehensive description of the material, process variants, equipment, control strategies and tooling techniques used. Procedures for materials characterisation, preform and mould design are also described and the text is augmented by a number of case studies for prototype and production parts.This book is an invaluable source for both industrial moulders and those working in research and development.

  • New Fibers

    • 2 Edición
    • Tatsuya Hongu + 1 más
    • Inglés
    The first edition of New Fibers was enthusiastically received by a worldwide audience and this second edition has provided an opportunity to revise and update its contents and examine new developments since 1990.There have been considerable changes in the nature of the fibers being produced, the production methods and in consumers' values and expectations. Since 1990, the march of high-tech fibers has continued, with an ever increasing sub-division to meet specialised applications, as in high performance, high-function and high-sense fibers.New research and development has produced fibers with high tenacity and modulus to give the super-fibers now used as industrial materials. The more aesthetic and comfortable modern lifestyle has given rise to improved Shin-gosen and it is this springboard that leads on to 'fibers for the next millennium', the subject of a new chapter. Another new chapter examines the resurgence of synthetic cellulosics since 1990, in particular the various solvent-spun fibers of the Lyocell and Tencell families.

  • Industrial Minerals and Their Uses

    A Handbook and Formulary
    • 1 Edición
    • Peter A. Ciullo
    • Inglés
    This multi-authored handbook is a unique cross-industry resource for formulators and compounders, and an invaluable reference for the producers of formulated commodities and industrial minerals. Monographs on each of the common functional industrial mineralsùasbestos, barite, calcium carbonate, diatomite, feldspar, gypsum, hormite, kaolin, mica, nepheline syenite, perlite, pyrophyllite, silica, smectite, talc, vermiculite, wollastonite, and zeoliteùinclude an overview of natural and commercial varieties, market size, and application areas. These are supported by descriptions of mineral structures and the wedding of minerals and chemicals through mineral surface modification. This orientation to the minerals and their uses forms the foundation for chapters where they are presented in the context of the overall technology of various consuming industries. Each of these industry-specific presentations covers both the chemical and mineral raw materials used by the formulator, how these are combined, and relevant test methods. These chapters serve a dual purpose. Each clarifies for technologists the function and value of the mineral constituents of their products. Equally important, they provide a primer on the technology of industries other than their own, so that raw material, formulation, processing and testing considerations can be compared and contrasted.The book concludes with a formulary demonstrating how specific mineral and chemical ingredients are actually compounded in major application areas, and technical data on scores of commercial mineral products.

  • Polymer Characterization

    Laboratory Techniques and Analysis
    • 1 Edición
    • Nicholas P. Cheremisinoff
    • Inglés
    This volume provides an overview of polymer characterization test methods. The methods and instrumentation described represent modern analytical techniques useful to researchers, product development specialists, and quality control experts in polymer synthesis and manufacturing. Engineers, polymer scientists and technicians will find this volume useful in selecting approaches and techniques applicable to characterizing molecular, compositional, rheological, and thermodynamic properties of elastomers and plastics.

  • Concrete Admixtures Handbook

    Properties, Science and Technology
    • 2 Edición
    • V.S. Ramachandran
    • Inglés
    Since the publication of the first edition ten years ago, significant developments have occurred in the use of admixtures in concrete. Eight new chapters and a full update of the preceding ten chapters bring this book up to date; reflecting the relative advances made in the science and technology of different groups of admixtures. The increased role and development of admixtures in concrete technology is evidenced by a number of conferences, publications, and novel admixtures available in the market place. These developments in the field caused the modification of many chapters in the first edition in order to reflect the advances. Although individual chapters refer to standards and specifications of admixtures, those only interested in the standards or techniques used in investigating admixtures will find the second chapter (Research Technologies, Standards, and Specifications) useful. Admixtures are not as inert as may be presumed. They may chemically interact with the constituents of concrete and affect the properties of the fresh and hardened concrete and its durability. The third chapter deals with these aspects. It was important to devote a chapter to recent attempts in developing new admixtures.

  • Handbook of Compound Semiconductors

    Growth, Processing, Characterization, and Devices
    • 1 Edición
    • Paul H. Holloway + 1 más
    • Inglés
    This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.

  • Short Fibre-Polymer Composites

    • 1 Edición
    • S K De + 1 más
    • Inglés
    Provides a detailed insight into short fibres of different types (metallic and organic) in a polymer matrix, as well as reporting on the design considerations and applications of such composites. It relates unparalleled research into a diverse range of composites.

  • NMR of Polymers

    • 1 Edición
    • Frank A. Bovey + 1 más
    • Inglés
    NMR has made important contributions to our understanding of structure–property relationships in polymers. This book provides an up-to-date and comprehensive overview of the fundamentals of NMR, with applications of multidimensional NMR and the new solution and solid-state methods in polymer science. NMR of Polymers is written by leading authorities for graduate students and professionals in academia and industry.

  • Advanced Catalysts and Nanostructured Materials

    Modern Synthetic Methods
    • 1 Edición
    • William R. Moser
    • Inglés
    The time has come for an assessment of the most important techniques for the fabrication of advanced catalysts. Catalyst production alone is more than a billion dollar business each year, and the product value of chemical processes using advanced catalysts is a few trillion dollars annually. This book seeks to provide a modern, materials science account of the best and most current techniques for the synthesis of advanced catalytic materials. Until now, there has been no single book which contains a definitive and comprehensive description of the important technologies for catalyst synthesis within the context of modern materials science. Academic researchers both in the catalytic sciences and materials sciences must have the best synthesis technologies available to accomplish the preparation of solid-state materials of specific structure and morphology. Althugh the emphasis is on new synthetic techniques for catalytic applications, the bookpresents all of the important technologies for the fabrication of electronic and structural ceramics, and superconductors.

  • Advanced Routes for Polymer Toughening

    • 1 Edición
    • Volumen 10
    • E. Martuscelli + 2 más
    • Inglés
    This volume is an account of the various approaches used to improve the toughness of polymer matrices. The correlations among the molecular structure of the components, the morphology and the mechanical properties of blend systems are stressed. Emphasis is placed on the methods used to control the structure of these materials during processing.The book concentrates on a number of systems which may be regarded as typologies of toughened plastics. From an extensive treatment of these systems more general concepts have been developed. These concepts which are indispensable in the design and formulation of tough polymer blends, include the role of the interface in multicomponent systems, the chemical reactivity of the blend components, the mode and state of dispersion of the second phase, the crystallinity and crystallization conditions, the glass transition temperature etc.The long term activity in the area is mainly reported, which started in the early seventies with the chemical modification of ethylene-propylene copolymers to be used as tougheners of Polyamide-6. Such a system is investigated further both from a fundamental and from an applicative point of view. The volume shows how intellectually stimulating and challenging the field of polymer toughening can be, and is intended to encourage the reader to do more research in this area.

  • New Developments in Construction and Functions of Organic Thin Films

    • 1 Edición
    • Volumen 4
    • T. Kajiyama + 1 más
    • Inglés
    This book is a timely review of recent advances on the construction and functions of organic thin films by a variety of techniques. The component molecules are relatively simple ones with self-organizing properties, i.e., ordered molecular assembly characteristics. The contents are arranged from the fundamental concepts of molecular assembly of self-organizing molecules to the potential biological applications of protein assemblies, supramolecular species.Recently, many promising applications for new electric, magnetic or optical devices, biomimetic membranes etc. have been the subject of investigation. However, fundamental studies on molecular assembly characteristics and functions for mono-, bi- and multi-layers, Langmuir-Blodgett films are indispensable to future technological innovations for molecular electronic devices and biological sensors.

  • Advances in Catalysis

    • 1 Edición
    • Volumen 41
    • Inglés
    Since 1948, this Series has filled the gap between the papers that report and the textbooks that teach in the diverse areas of catalysis research. The editors of and contributors to Advances in Catalysis are dedicated to recording progress in this area. Each volume of Advances in Catalysis contains articles covering a subject of broad interest.

  • Damage and Interfacial Debonding in Composites

    • 1 Edición
    • Volumen 44
    • D.H. Allen
    • Inglés
    Written by leading authorities in the field of damage and micromechanics of composites, this book deals mainly with the damage impaired in composites due to different types of loading. It examines the different types of damage in composites in the fiber, matrix, debonding and delamination. It also reviews the theoretical characterization of damage, its experimental determination as well as the numerical simulation of damage.

  • Porous Silicon: Material, Technology and Devices

    • 1 Edición
    • Volumen 57
    • H. Münder + 2 más
    • Inglés
    These proceedings represent the most recent progress in the field of porous silicon. Several papers present results in which the influence of the formation parameters on the structural and optical properties has been investigated. Further topics dealt with include: the influence of light during the formation process on the photoluminescence behaviour; fundamental mechanism of the photoluminescence; the electroluminescence of porous silicon; applications based on porous silicon; charge carrier transport.

  • Unified Constitutive Laws of Plastic Deformation

    • 1 Edición
    • A. S. Krausz + 1 más
    • Inglés
    High-technology industries using plastic deformation demand soundly-based economical decisions in manufacturing design and product testing, and the unified constitutive laws of plastic deformation give researchers aguideline to use in making these decisions. This book provides extensive guidance in low cost manufacturing without the loss of product quality. Each highly detailed chapter of Unified Constitutive Laws of Plastic Deformation focuses on a distinct set of defining equations. Topics covered include anisotropic and viscoplastic flow, and the overall kinetics and thermodynamics of deformation. This important book deals with a prime topic in materials science and engineering, and will be of great use toboth researchers and graduate students.

  • Mechanics of Transformation Toughening and Related Topics

    • 1 Edición
    • Volumen 40
    • J.H. Andreasen + 1 más
    • Inglés
    Since the benefit of stress-induced tetragonal to monoclinic phase transformation of confined tetragonal zirconia particles was first recognized in 1975, the phenomenon has been widely studied and exploited in the development of a new class of materials known as transformation toughened ceramics (TTC). In all materials belonging to this class, the microstructure is so controlled that the tetragonal to monoclinic transformation is induced as a result of a high applied stress field rather than as a result of cooling the material below the martensitic start temperature.The significance of microstructure to the enhancement of thermomechanical properties of TTC is now well understood, as are the mechanisms that contribute beneficially to their fracture toughness. The micromechanics of these mechanisms have been extensively studied and are therefore presented here in a cogent manner.The authors also review dislocation formalism for the modelling of cracks and Eshelby's technique. In compiling this monograph the authors present the most up-to-date and complete review of the field and include several topics which have only recently been fully investigated.

  • Damage Mechanics

    • 1 Edición
    • Volumen 41
    • D. Krajcinovic
    • Inglés
    This book provides the first truly comprehensive study of damage mechanics. All concepts are carefully identified and defined in micro- and macroscopic scales. In terms of the methods and observation scales, the main part of the book is divided into three chapters. These chapters consider the stochastic models applied to atomistic scale, micromechanical models (for arbitary concentrations of defects) on microscopic scale and continuum models on the macroscopic scale. It is intended for people who are doing or planning to do research in the mechanics and material science aspects of brittle deformation of solids with heterogeneous microstructure.

  • Science of Fullerenes and Carbon Nanotubes

    Their Properties and Applications
    • 1 Edición
    • M. S. Dresselhaus + 2 más
    • Inglés
    The discovery of fullerenes (also known as buckyballs) has generated tremendous excitement and opened up a new field of carbon chemistry. As the first book available on this topic, this volume will be a landmark reference in the field. Because buckyballs are essentially closed hollow cages made up of carbon atoms, they can be manipulated in a variety of ways to yield never-before-seen materials. The balls can, for instance, be doped with atoms or pulled out into tubules and filled with lead to provide properties of high-temperature superconductivity. Researchers can now create their own buckyballs in a process that is almost as simple as making soot, making this research as inexpensive as it is exotic (which has doubtless contributed to its popularity). Researchers anticipate that fullerenes will offer boundless opportunities in the development of new products, drugs and materials.Science of Fullerenes and Carbon Nanotubes introduces materials scientists, chemists, and solid state physicists to the field of fullerenes, and discusses the unique properties and applications. both current and future, of all classes of fullerenes.

  • Metal Surface Electron Physics

    • 1 Edición
    • A. Kiejna + 1 más
    • Inglés
    During the last thirty years metal surface physics, or generally surface science, has come a long way due to the development of vacuum technology and the new surface sensitive probes on the experimental side and new methods and powerful computational techniques on the theoretical side. The aim of this book is to introduce the reader to the essential theoretical aspects of the atomic and electronic structure of metal surfaces and interfaces. The book gives some theoretical background to students of experimental and theoretical physics to allow further exploration into research in metal surface physics.The book consists of three parts. The first part is devoted to classical description of geometry and structure of metal crystals and their surfaces and surface thermodynamics including properties of small metallic particles. Part two deals with quantum-mechanical description of electronic properties of simple metals. It starts from the free electron gas description and introduces the many body effects in the framework of the density functional theory, in order to discuss the basic surface electronic properties of simple metals. This part outlines also properties of alloy surfaces, the quantum size effect and small metal clusters. Part three gives a succinct description of metal surfaces in contact with foreign atoms and surfaces. It treats the work function changes due to alkali metal adsorption on metals, adhesion between metals and discusses the universal aspects of the binding energy curves. In each case extensive reference lists are provided.

Temas relacionados