Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Principles of Transistor Circuits

    • 9 Edición
    • S W Amos + 1 más
    • Inglés
    Over the last 40 years, Principles of Transistor Circuits has provided students and practitioners with a text they can rely on to keep them at the forefront of transistor circuit design. Although integrated circuits have widespread application, the role of discrete transistors both as important building blocks which students must understand, and as practical solutions to design problems, remains undiminished. The ninth edition has been thoroughly updated to cover the latest technology and applications, including computer circuit simulation, and many diagrams have been revised to bring them in line with current usage. Updated topics include thyristors, Darlington transistors, amplifiers, ring modulators, power supplies, optoelectronics and logic circuits.

  • Aircraft Performance

    Theory and Practice
    • 1 Edición
    • Martin E. Eshelby
    • Inglés
    Aircraft performance is one of the key aspects of the aircraft industry. Starting with the consideration that performance theory is the defining factor in aircraft design, the author then covers the measurement of performance for the certification, management and operation of aircraft. This practical book discusses performance measures which relate to airworthiness certificates (a legal requirement), as well as those needed when compiling the aircraft performance manual for the aircraft. In addition, operational performance is covered, including the financial considerations required by airlines to ensure maximisation of commercial return. Available in North and South America from the AIAA, 1801 Alexander Bell Drive, Suite 500, Reston, VA 20191, USA

  • Introduction to Digital Systems

    • 1 Edición
    • John Crisp
    • Inglés
    Introduction to Digital Systems introduces digital electronics from first principles and goes on to cover all the main areas of knowledge and expertise needed by students up to first year degree level, as well as technicians and other professionals. Unlike most texts, Introduction to Digital Systems also covers the practicalities of designing and building circuits, including fault-finding and use of test equipment. Students will find the text ideally matched for courses covering electronics, systems and control, and electronic servicing. Whether you are looking for a complete self-study course in digital electronics, a concise reference text to dip into or a course text that is readable and straightforward, John Crisp has provided the solution.

  • Digital Frequency Synthesis Demystified

    • 1 Edición
    • Bar-Giora Goldberg
    • Inglés
    · In-depth coverage of modern digital implementations of frequency synthesis architectures· Numerous design examples drawn from actual engineering projectsDigital frequency synthesis is used in modern wireless and communications technologies such as radar, cellular telephony, satellite communications, electronic imaging, and spectroscopy. This is book is a comprehensive overview of digital frequency synthesis theory and applications, with a particular emphasis on the latest approaches using fractional-N phase-locked loop technology.

  • Modern Component Families and Circuit Block Design

    • 1 Edición
    • Nihal Kularatna
    • Inglés
    Kularatna's new book describes modern component families and how to design circuit blocks using them. While much of this information may be available elsewhere, in Modern Component Families and Circuit Block Design it is integrated with additional design hints that are unique. The discussion covers most components necessary in an embedded design or a DSP-based real time system design. The chapter on modern semi-conductor sensors allows system designers to use the latest sensor ICs for real-world physical parameter sensing.

  • The Welding Workplace

    Technology Change and Work Management for a Global Welding Industry
    • 1 Edición
    • R Boekholt
    • Inglés
    The welding industry is in the process of change and under pressure. New processes and new materials are being introduced in the wake of increasingly tough competition.In this book, Richard Boekholt, a senior welding consultant with vast experience and a uniquely international outlook, has compiled and summarised international practice within the field of welding developed from a European Union study 'Working Life 2000. The Welding Industry in Technological Change: a Human Resource Perspective'.The book looks at the impact of automation and explains that, while some people may feel that the use of robotics and computers will threaten welders' jobs, in fact robots and computers will help welders, not replace them. At present welders are in demand and companies are faced with difficulties in recruiting and retaining good staff. It is through improved working conditions, which are presently often environmentally unsafe with workers exposed to smoke, noise, vibration and heavy physical labour, that companies can attract and keep workers.The book emphasises the importance of managing human resources and looks at new ways of doing this. A recognition of the importance of managing human resources and looks at new ways of doing this. A recognition of the importance of training, of instructors as well as workers, will be essential to achieve the dedicated, motivated and flexible workforce necessary to work with the new technologies of the 21st century.

  • Automotive Spark-Ignited Direct-Injection Gasoline Engines

    • 1 Edición
    • F. Zhao + 2 más
    • Inglés
    The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.

  • Current Advances in Mechanical Design and Production VII

    • 1 Edición
    • M.F. Hassan + 1 más
    • Inglés
    The International Conference on Mechanical Design and Production has over the years established itself as an excellent forum for the exchange of ideas in these established fields. The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000. International engineers and scientists gathered to exchange experiences and highlight the state-of-the-art research in the fields of mechanical design and production. In addition a heavy emphasis was placed on the issue of technology transfer. Over 100 papers were accepted for presentation at the conference. Current Advances in Mechanical Design & Production VII does not, however, attempt to publish the complete work presented but instead offers a sample that represents the quality and breadth of both the work and the conference. Ten invited papers and 54 ordinary papers have been selected for inclusion in these proceedings. They cover a range of basic and applied topics that can be classified into six main categories: System Dynamics, Solid Mechanics, Material Science, Manufacturing Processes, Design and Tribology, and Industrial Engineering and its Applications.

  • Ergonomics Guidelines and Problem Solving

    • 1 Edición
    • Volumen 1
    • A. Mital + 2 más
    • Inglés
    There is an urgent need to disseminate ergonomics "know-how" to the work place. This book meets that need by providing clear guidelines and problem solving recommendations to assist the practitioner in decisions that directly protect the health, safety and well-being of the worker.The guidelines have evolved from a series of symposia on Ergonomic Guidelines and Problem Solving. Initially experts in each area selected were asked to write draft guidelines. These guidelines were circulated to participants at the symposia and to other experts for review before being comprehensively revised. In some instances these guidelines cannot be considered complete but it is important now to put some recommendations forward as guidelines. It is hoped that as new research emerges each guideline will be updated.Each guideline has been divided into two parts. Part I contains the guidelines for the practitioner and Part II provides the scientific basis or the knowledge for the guide. Such separation of the applied and theoretical content was designed to facilitate rapid incorporation of the guide into practice.The target audience for this book is the practitioner. The practitioner may be a manager, production system designer, shop supervisor, occupational health and safety professional, union representative, labor inspector or production engineer. For each of the guidelines, relevant practitioners are described.Topics covered include work space design, tool design, work-rest schedules, illumination and maintenance.

  • Metal Cutting

    • 4 Edición
    • Paul K. Wright + 1 más
    • Inglés
    Metal cutting is an essential process throughout engineering design and manufacturing industries. To increase efficiency and reduce costs, it is necessary to improve understanding of the metal cutting process. This book presents a comprehensive treatment of the subject that focuses on the features of the behavior of tool and work materials that influence the efficiency of metal cutting operations. The fourth edition of this acclaimed book has been expanded and revised to include significant changes and additions to metal cutting theory, and to cover developments in tool materials and industrial practice. In particular, improvements in the understanding of the generation of heat and distribution of temperature in the cutting tool are described; a discussion of the structure, properties, and performance of newly developed ceramic tool materials and tool coatings is presented; new information of the machinability of alloys is given; and the introduction of calcium deoxidized steels and their improved machinability are assessed. Additionally, a material selection and design-based approach is expanded upon to improve industrial relevance. Metal Cutting provides invaluable information for those engaged in machining, toolmaking, and related engineering activities, and it serves as a useful introduction to the subject for students of metallurgy and engineering.

  • Hermeticity of Electronic Packages

    • 1 Edición
    • Hal Greenhouse
    • Inglés
    This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the package—especially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to solve another. Thus, the book provides a ready reference to help deal with day to day issues as they arise.The book gathers in a single volume a great many issues previously available only in journals—or only in the experience of working engineers. How to define the ""goodness"" of a seal? How is that seal measured? How does the integrity of the seal affect circuit reliability? What is the significance of the measured integrity of the seal? What is the relationship of Residual Gas Analysis and the seal integrity? The handbook answers these questions and more, providing an analysis of nearly 100 problems representative of the wide variety of challenges that actually occur in industry today.

  • Conductive Polymers and Plastics

    In Industrial Applications
    • 1 Edición
    • Larry Rupprecht
    • Larry Rupprecht
    • Inglés
    This book is a collection of papers by individuals in industry and academia on research and application development of conductive polymers and plastics. Conductive plastics are positioned to play an increasingly important role in affairs of mankind, specifically in the area of electrical and electronic conductivity. While general knowledge about conductive polymers and plastics has been available for many years, a true understanding of their application has only taken place in the last 3 to 4 years. This is attributed to advances in materials and processing techniques. Engineers have only begun to explore the design freedom and economic benefits of specifying conductive polymers and plastics in industrial and business applications.This book is a key reference and guide to the use of conductive polymers and plastics. It is a summary of existing technologies, but also a look at future possibilities.

  • Handbook of Ceramics Grinding & Polishing

    • 1 Edición
    • Ioan D. Marinescu + 2 más
    • Ioan D. Marinescu
    • Inglés
    Focusing on the machining of ceramic materials such as silicon nitride, silicon carbide, and zirconia, this handbook meets the growing need in industry for a clear understanding of modern improvements in ceramic processing. The presentation is international in scope, with techniques and information represented from the USA, Japan, Germany, and the United Kingdomùcountries that have made important contributions to the field. The 20 expert chapter authors explore the challenge of reducing the costs of machining operations, a continuing problem in an industry where ceramic parts must be machined into final form to achieve a proper fit. The handbook reveals that the abrasive machining of ceramic materials will always be a requirement because of the difficulty of controlling parts dimensions at the high temperatures required in their creation. The contributors then explain the properties and characteristics of ceramics, the various types of abrasive processes, and typical tests used in the procedures. An entire section of the handbook concerns grinding tools, their conditioning, lubrication, and cooling, checking for wear on the tools, and using them efficiently. The book also examines modern honing and superfinishing tools and machines, and describes advances in the technology, as well as lapping and polishing techniques using chemical compounds and ultrasound.Ceramics is a field where more advanced products are sure to appear. Many of the products will require advanced, better-controlled processing technologies; vastly improved productivity in manufacturing; and increased product reliability. The contributors to this Handbook will assist readers in the attainment of these important goals.

  • Rheology Modifiers Handbook

    Practical Use and Application
    • 1 Edición
    • David D. Braun + 1 más
    • Inglés
    This is the first single-volume handbook with the information a researcher needs to select the best rheology modifiers for his/her project. Information on 20 different types of rheology modifiers manufactured by 26 companies worldwide is described. These range from Acrylic Polymers to Xanthan Gum. This handbook was written because, in the authors' experience, the selection of a rheology modifier for specific applications is an arduous task. It requires researching the technical literature of numerous suppliers, contacting them for current information and recommendations, and paring the list of candidates from hundreds to a few dozen. This book will enable readers to easily identify the best candidates for an application with a minimum investment of time.The book is divided into four sections. Part I reviews rheology fundamentals. Part II presents details on the products available from the 26 represented companies. Part III focuses on the selection of suitable rheology modifier candidates. Part IV is a formulary containing the contributions of the suppliers.

  • Industrial Brushless Servomotors

    • 1 Edición
    • Peter Moreton
    • Inglés
    Industrial use of the brushless servomotor, for instance in robotics, is increasing rapidly, because of their low maintenance needs and capabilities at high transient speeds. They offer flexibility and high performance, and advances in power electronics and microelectronics means they are now more affordable. This handbook gives the user of brushless servomotors a comprehensive guide to their use, including a description of all main features of the brushless motor drive system. Throughout mathematics is kept to a minimum and practical guidance is given based on real-life experience.Peter Moreton is a Research Fellow at the University of Bristol, having spent time in industry and universities worldwide.

  • Tribology in Machine Design

    • 1 Edición
    • Tadeusz Stolarski
    • Inglés
    "Tribology in Machine Design is strongly recommended for machine designers, and engineers and scientists interested in tribology. It should be in the engineering library of companies producing mechanical equipment."Applied Mechanics ReviewTribology in Machine Design explains the role of tribology in the design of machine elements. It shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications within mechanical devices and systems.The computer offers today's designer the possibility of greater stringency of design analysis. Dr Stolarski explains the procedures and techniques that allow this to be exploited to the full. This is a particularly practical and comprehensive reference source book for the practising design engineer and researcher. It will also find an essential place in libraries catering for engineering students on degree courses in universities and polytechnics. The material is grouped according to applications for ease of use and reference.

  • EMC for Systems and Installations

    • 1 Edición
    • Tim Williams + 1 más
    • Inglés
    This is a guide for the system designers and installers faced with the day-to-day issues of achieving EMC, and will be found valuable across a wide range of roles and sectors, including process control, manufacturing, medical, IT and building management. The EMC issues covered will also make this book essential reading for product manufacturers and suppliers - and highly relevant for managers as well as technical staff. The authors' approach is thoroughly practical - all areas of installation EMC are covered, with particular emphasis on cabling and earthing. Students on MSc and CPD programmes will also find in this book some valuable real-world antidotes to the academic treatises. The book is presented in two parts: the first is non-technical, and looks at the need for EMC in the context of systems and installations, with a chapter on the management aspects of EMC. The second part covers the technical aspects of EMC, looking at the various established methods which can be applied to ensure compatibility, and setting these in the context of the new responsibilities facing system builders. EMC for Systems and Installations is designed to complement Tim Williams' highly successful EMC for Product Designers.

  • Advances in Steel Structures (ICASS '99)

    2 Volume Set
    • 1 Edición
    • Siu-Lai Chan + 1 más
    • Inglés
    These two volumes of proceedings contain 9 invited keynote papers and 126 contributed papers to be presented at the Second International Conference on Advances in Steel Structures held on 15-17 December 1999 in Hong Kong. The conference is a sequel to the International Conference on Advances in Steel Structures held in Hong Kong in December 1996. The conference will provide a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. The papers to be presented at the conference cover a wide spectrum of topics and were contributed from over 15 countries around the world. They report the current state-of-the art and point to future directions of structural steel research.

  • Binary Digital Image Processing

    A Discrete Approach
    • 1 Edición
    • Stéphane Marchand-Maillet + 1 más
    • Inglés
    Binary Digital Image Processing is aimed at faculty, postgraduate students and industry specialists. It is both a text reference and a textbook that reviews and analyses the research output in this field of binary image processing. It is aimed at both advanced researchers as well as educating the novice to this area. The theoretical part of this book includes the basic principles required for binary digital image analysis. The practical part which will take an algorithmic approach addresses problems which find applications beyond binary digital line image processing.The book first outlines the theoretical framework underpinning the study of digital image processing with particular reference to those needed for line image processing. The theoretical tools in the first part of the book set the stage for the second and third parts, where low-level binary image processing is addressed and then intermediate level processing of binary line images is studied. The book concludes with some practical applications of this work by reviewing some industrial and software applications (engineering drawing storage and primitive extraction, fingerprint compression).

  • Data Reconciliation and Gross Error Detection

    An Intelligent Use of Process Data
    • 1 Edición
    • Shankar Narasimhan + 1 más
    • Inglés
    This book provides a systematic and comprehensive treatment of the variety of methods available for applying data reconciliation techniques. Data filtering, data compression and the impact of measurement selection on data reconciliation are also exhaustively explained.Data errors can cause big problems in any process plant or refinery. Process measurements can be correupted by power supply flucutations, network transmission and signla conversion noise, analog input filtering, changes in ambient conditions, instrument malfunctioning, miscalibration, and the wear and corrosion of sensors, among other factors. Here's a book that helps you detect, analyze, solve, and avoid the data acquisition problems that can rob plants of peak performance. This indispensable volume provides crucial insights into data reconciliation and gorss error detection techniques that are essential fro optimal process control and information systems. This book is an invaluable tool for engineers and managers faced with the selection and implementation of data reconciliation software, or for those developing such software. For industrial personnel and students, Data Reconciliation and Gross Error Detection is the ultimate reference.

  • Artificial Intelligence in Real-Time Control 1998

    • 1 Edición
    • Y.H. Pao + 1 más
    • Inglés
    This symposium was the seventh in a very successful series in this field. Since the beginning of the series, there have been a number of very positive developments in the topical area of 'Intelligent Control'. In particular, the area referred to as 'situated control' has stimulated the formation of new perspectives towards real-time intelligent systems. The performances of such artificial species as walking cockroaches, maze-negotiating mice, coke-can collecting robots and the like have encouraged the exploration of yet more adaptive control perspectives. In this symposium, there was a strong wind of change bringing more consideration of the roles of learning, evolution, hybrid systems and so on under many diverse labels and for many different systems and circumstances.

  • Analysis, Design and Evaluation of Man-Machine Systems 1998

    • 1 Edición
    • S. Nishida + 1 más
    • Inglés
    Automatic machines or smart robots are interconnected with distributed knowledge bases by nation- or world wide digital networks. They are supporting human life in various places, at the same time saving energy and resources. Technology and economic development are effecting rapid changes depending on the fields, regions and culture to the way people interact with the systems, while sometimes keeping, otherwise forsaking their own traditions. Man machine systems have to create new interaction styles between human and machine intelligence, support cooperation among different organizations and enhance situation understanding for the long and short term, or remote and local activities regarding performance, safety, security and satisfaction. The seventh IFAC/IFIP/IFORS/IEA symposium on Analysis, Design and Evaluation of Man-Machine Systems was held in Kyoto on September 16-18, 1998. At the symposium, 99 papers were presented including four plenary papers among 131 submissions.

  • Fluid Power Dynamics

    • 1 Edición
    • R. Keith Mobley
    • Inglés
    Fluid Power Dynamics is a 12-chapter book in two sections covering the basics of fluid power through hydraulic system components and troubleshooting. The second section covers pneumatics from basics through to troubleshooting.This is the latest book in a new series published by Butterworth-Heineman... in association with PLANT ENGINEERING magazine. PLANT ENGINEERING fills a unique information need for the men and women who operate and maintain industrial plants: It bridges the information gap between engineering education and practical application. As technology advances at increasingly faster rates, this information service is becoming more and more important. Since its first issue in 1947, PLANT ENGINEERING has stood as the leading problem-solving information source for America's industrial plant engineers, and this book series will effectively contribute to that resource and reputation.

  • Understanding DC Circuits

    • 1 Edición
    • Dale Patrick + 1 más
    • Inglés
    Understanding DC Circuits covers the first half of a basic electronic circuits theory course, integrating theory and laboratory practice into a single text. Several key features in each unit make this an excellent teaching tool: objectives, key terms, self-tests, lab experiments, and a unit exam. Understanding DC Circuits is designed with the electronics beginner and student in mind. The authors use a practical approach, exposing the reader to the systems that are built with DC circuits, making it easy for beginners to master even complex concepts in electronics while gradually building their knowledge base of both theory and applications. Each chapter includes easy-to-read text accompanied by clear and concise graphics fully explaining each concept before moving onto the next. The authors have provided section quizzes and chapter tests so the readers can monitor their progress and review any sections before moving onto the next chapter. Each chapter also includes several electronics experiments, allowing the reader to build small circuits and low-cost projects for the added bonus of hands-on experience in DC electronics. Understanding DC Circuits fully covers dozens of topics including energy and matter; static electricity; electrical current; conductors; insulators; voltage; resistance; schematic diagrams and symbols; wiring diagrams; block diagrams; batteries; tools and equipment; test and measurement; series circuits; parallel circuits; magnetism; electromagnetism; inductance; capacitance; soldering techniques; circuit troubleshooting; basic electrical safety; plus much more.

  • Understanding AC Circuits

    • 1 Edición
    • Dale Patrick + 1 más
    • Inglés
    Understanding AC Circuits covers the second half of a basic electronic circuits theory course, integrating theory and laboratory practice into a single text. Several key features in each unit make this an excellent teaching tool: objectives, key terms, self-tests, lab experiments, and a unit exam. This new edition has been thoroughly revised and updated by the authors to reflect the latest information on electronics. Understanding AC Circuits is designed with the electronics beginner and student in mind. The authors use a practical approach exposing the reader to the systems that are built with AC circuits making it easy for beginners to master even complex concepts in electronics while gradually building their knowledge base of both theory and applications. Each chapter includes easy-to-read text accompanied by clear and concise graphics fully explaining each concept before moving onto the next. The authors have provided section quizzes and chapter tests so the readers can monitor their progress and review any sections before moving onto the next chapter. Each chapter also includes several electronics experiments, allowing the reader to build small circuits and low-cost projects for the added bonus of hands-on experience in AC electronics. Understanding AC Circuits fully covers dozens of topics including single-phase and three-phase AC electronics; electrical generator basics; how to use a multimeter and oscilloscope in AC electronics; troubleshooting and testing circuits; tools and equipment; resistive circuits; inductive circuits; capacitive circuits; vector diagrams; series circuits; transformers; filter circuits; resonant circuits; decibels; waveshaping control; electronic symbols; soldering techniques; plus much more.

  • Radio Spectrum Conservation

    Radio Engineering Fundamentals
    • 1 Edición
    • William Gosling
    • Inglés
    The conservation of the spectrum is one of the key challenges facing radio systems professionals today. It will have an impact on equipment design, system design and communications policy for digital and analog systems in civil and military use, cell phones, private mobile radio, satellite communications and a growing number of other applications. This concise readable text keeps mathematics to a working minimum, with focus on the practical. It is a companion volume to Gosling's Radio Antennas and Propagation. Professor Gosling distils his experience in industry and teaching to show engineers how to deal with these challenges by describing the process of effective spectrum utilisation, including examination of separation of transmissions by space, time, frequency and sequency. Throughout the book reference is made to real-life examples to illustrate the theory. William Gosling has spent a lifetime in industry and education, including time as Technical Director of Plessey, President of EUREL (European Convention of Engineering Societies), Past President of the Institution of Electrical Engineers, and Chair of Electronic Engineering at the University of Bath, where he is currently Visiting Professor. He has published eleven books and over fifty scientific papers.

  • Advances in Damage Mechanics: Metals and Metal Matrix Composites

    • 1 Edición
    • George Z. Voyiadjis
    • Inglés
    This book provides in a single and unified volume a clear and thorough presentation of the recent advances in continuum damage mechanics for metals and metal matrix composites. Emphasis is placed on the theoretical formulation of the different constitutive models in this area, but sections are added to demonstrate the applications of the theory. In addition, some sections contain new material that has not appeared before in the literature. The book is divided into three major parts: Part I deals with the scalar formulation and is limited to the analysis of isotropic damage in materials; Parts II and III deal with the tensor formulation and is applied to general states of deformation and damage. The material appearing in this text is limited to plastic deformation and damage in ductile materials (e.g. metals and metal matrix composites) but excludes many of the recent advances made in creep, brittle fracture, and temperature effects since the authors feel that these topics require a separate volume for this presentation. Furthermore, the applications presented in this book are the simplest possible ones and are mainly based on the uniaxial tension test.

  • Pocket Guide to Flanges, Fittings, and Piping Data

    • 3 Edición
    • R. R. Lee
    • Inglés
    Here is the latest edition of a compact reference that has been a real treasure for materials personnel for more than 15 years. Packed with pictures, definitions, and descriptions of ANSI and API piping materials, such as flanges, fittings, bolts, gaskets, and required wrench sizes, it serves as an excellent guide for "rookies" and a ready reference for "old-timers" alike.This compact reference is packed with pictures, definitions, and descriptions of ANSI and API piping materials, such as flanges, fittings, bolts, gaskets, and required wrench sizes. It contains basic information and data to answer common questions that arise in materials handling, pipe fitting, and engineering.

  • Numerical Methods in Electromagnetism

    • 1 Edición
    • Sheppard Salon + 1 más
    • Inglés
    Electromagnetics is the foundation of our electric technology. It describes the fundamental principles upon which electricity is generated and used. This includes electric machines, high voltage transmission, telecommunication, radar, and recording and digital computing. Numerical Methods in Electromagnetism will serve both as an introductory text for graduate students and as a reference book for professional engineers and researchers. This book leads the uninitiated into the realm of numerical methods for solving electromagnetic field problems by examples and illustrations. Detailed descriptions of advanced techniques are also included for the benefit of working engineers and research students.

  • Materials and Processes for Submicron Technologies

    • 1 Edición
    • Volumen 89
    • J.M. Martinez-Duart + 2 más
    • Inglés
    The European Materials Society decided to hold a Symposium entitled Materials and Processes for Submicron Technologies in June 16-19, 1998, within the yearly E-MRS Spring Meeting in Strasbourg, France. The purpose of this meeting was to discuss the results of the advances in microelectronic devices directly relating to the reduction in size of features of the devices down to submicron size. When electronic materials are patterned to these small sizes, their physico-chemical properties show many aspects (interdiffusion, electromigration, etc.), many of these not well known yet. The articles presented in this volume, 28 in number, are representative of the 40 papers accepted for this particular E-MRS Meeting (Symposium N).

  • The Art of Designing Embedded Systems

    • 1 Edición
    • Jack Ganssle
    • Inglés
    Art of Designing Embedded Systems is apart primer and part reference, aimed at practicing embedded engineers, whether working on the code or the hardware design. Embedded systems suffer from a chaotic, ad hoc development process. This books lays out a very simple seven-step plan to get firmware development under control. There are no formal methodologies to master; the ideas are immediately useful. Most designers are unaware that code complexity grows faster than code size. This book shows a number of ways to linearize the complexity/size curve and get products out faster. Ganssle shows ways to get better code and hardware designs by integrating hardware and software design. He also covers troubleshooting, real time and performance issues, relations with bosses and coworkers, and tips for building an environment for creative work.Get better systems out faster, using the practical ideas discussed in Art of Designing Embedded Systems. Whether you're working with hardware or software, this book offers a unique philosophy of development guaranteed to keep you interested and learning.

  • Handbook of Time Series Analysis, Signal Processing, and Dynamics

    • 1 Edición
    • D. S.G. Pollock + 2 más
    • Inglés
    The aim of this book is to serve as a graduate text and reference in time series analysis and signal processing, two closely related subjects that are the concern of a wide range of disciplines, such as statistics, electrical engineering, mechanical engineering and physics.The book provides a CD-ROM containing codes in PASCAL and C for the computer procedures printed in the book. It also furnishes a complete program devoted to the statistical analysis of time series, which will be attractive to a wide range of academics working in diverse mathematical disciplines.

  • Solid State Physics

    • 1 Edición
    • Volumen 54
    • Inglés

  • Introduction to Engineering Design

    • 1 Edición
    • Andrew Samuel + 1 más
    • Inglés
    Introduction to Engineering Design is a completely novel text covering the basic elements of engineering design for structural integrity. Some of the most important concepts that students must grasp are those relating to 'design thinking' and reasoning, and not just those that relate to simple theoretical and analytical approaches. This is what will enable them to get to grips with *practical* design problems, and the starting point is thinking about problems in a 'deconstructionist' sense.By analysing design problems as sophisticated systems made up of simpler constituents, and evolving a solution from known experience of such building blocks, it is possible to develop an approach that will enable the student to tackle even completely alien design scenarios with confidence. The other essential aspect of the design process - the concept of failure, and its avoidance - is also examined in detail, and the importance not only of contemplating expected failure conditions at the design stage but also checking those conditions as they apply to the completed design is stressed.These facets in combination offer a systematic method of considering the design process and one that will undoubtedly find favour with many students, teaching staff and practising engineers alike.

  • Handbook of Mould, Tool and Die Repair Welding

    • 1 Edición
    • Steve Thompson
    • Inglés
    This book covers an important and frequently overlooked area of welding - the repair of moulds, tools and dies. Because two rather different trades overlap in this process - welding and toolmaking, the materials and techniques involved have tended to be obscured. For many years, toolmakers and tool users have had to rely on the small number of specialist welders who do understand exactly what welding repair involves and have the skills to carry it out.Understanding the technical side of tool steels is frequently a problem for welders and understanding the practical side of welding can be a problem for machinists. This book has been written so that specialists from both sides can get to grips with the techniques and procedures involved.The Handbook of mould, tool and die repair welding is designed to save companies time and money by:Acting as a training aid so that repairs can be carried out in-houseReducing the need to send work out and the costs involvedReducing the production time lost when repairs are requiredProviding clear diagrams and a user-friendly style to make the techniques easily understoodIt is an essential resource for Tool Room Managers and Foremen as well as maintenance and repair welding specialists.

  • Handbook of Giant Magnetostrictive Materials

    • 1 Edición
    • Göran Engdahl
    • Inglés
    Handbook of Giant Magnetostrictive Materials contains the knowledge that a mechanical or an electrical engineer needs when considering the use of magnetostrictive materials in a construction project. The book covers the physical origin of giant magnetostriction, its manufacturing and metallurgy, and grain related processes under operation. Comprehensive descriptions of useful models of design methods and tools are given, including the performance of devices and systems comprised of magnetostrictive materials, considering the electrical, magnetic, mechanical, and thermal effects. The book covers all major characterization methods of giant magnetostrictive bulk materials, actuators, and systems. A structured inventory of current and emerging applications of giant magnetostrictive materials is given, covering areas such as sound and vibration sources, vibration control, motional control, material processing, and electromechanical converters. The final chapter offers an up-to-date review of the emerging giant magnetostrictive thin film technologies. The book also contains a market inventory with valuable contact information.

  • Newnes TV and Video Engineer's Pocket Book

    • 3 Edición
    • EUGENE TRUNDLE
    • Inglés
    This well-known book is an essential tool for every service engineer, and an extremely useful reference source for a wide range of engineers, students, sales and installation staff. It presents a wide range of data and key information in a compact form, covering television reception, satellite and cable television, video recorders, colour camera technology, teletext, sound systems, fault-finding procedures and much more. The new edition has been thoroughly updated to include digital and other new technologies, with new chapters on digital camcorders and VCRs, digital television, Dolby sound systems, and home cinema. Eugene Trundle is well known as a contributor to Television and other magazines, and as author of a number of books on servicing and TV technology. He also works in the servicing industry, so his writing is based on hands-on experience.

  • Mechanics of Solids

    • 1 Edición
    • Carl T. F. Ross
    • Inglés
    This text is the primary recommendation of the UK Engineering Council Faculty of Technology to all British universities as of approved standard and quality for use as a text for the Board's own examinations. It introduces the fundamental concepts and principles of statics and stress analysis as the essential reading for first year engineering students. Worked examples from the authors experience reinforce comprehension of key concepts. Tutorial solutions with explanation in extended detail have been provided for students. Key elements include: use of free-body diagrams to help problem solving; coverage of composite materials; torsion of circular and non-circular sections; and the matrix-displacement method.

  • Welded Joint Design

    • 3 Edición
    • J Hicks
    • Inglés
    Based on the European Welding Engineer (EWF) syllabus Part 3 – Construction and Design, this book provides a clear, highly illustrated and concise explanation of how welded joints and structures are designed and of the constraints which welding may impose on the design. It is therefore of value both to the welding engineer and the design engineerMany engineers coming into the profession of welding engineering lack a background in design and construction of welded structures and plant. This book has been written with such engineers very much in mind.The safe performance of a structure relies on materials and methods of fabrication which can respond to the explicit or implicit design requirements. It is essential that the welding engineer has the opportunity of making his specialist input to the design process, and an understanding of the basis of the design will help that contribution to be most effective. It is also important that the practising design engineer acquires a basic knowledge of the relevant aspects of welding to be able to execute satisfactory designs and, equally important, to know when to seek the input of a qualified welding engineer.Designed for both students and practising engineers in welding and design, the book will also be of great value to civil, structural, mechanical and plant engineers. There is also much that will interest test houses, welding equipment and consumable manufacturers, classification societies and steel companies.

  • Small Fatigue Cracks

    Mechanics, Mechanisms and Applications
    • 1 Edición
    • K.S. Ravichandran + 2 más
    • Inglés
    This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.

  • Practical Audio Amplifier Circuit Projects

    • 1 Edición
    • Andrew Singmin
    • Inglés
    Practical Audio Amplifier Circuit Projects builds on the introduction to electronic circuits provided in Singmin's innovative and successful first book, Beginning Electronics Through Projects. Both books draw on the author's many years of experience as electronics professional and as hobbyist. As a result, his project descriptions are lively, practical, and very clear.With this new volume, the reader can build relatively simple systems and achieve useable results quickly. The projects included here allow a hobbyist to build amplifier circuits, test them, and then put them into a system. Progress through a graduated series of learning activities culminates in unique devices that are nevertheless easy to build. Learn the basic building blocks of audio amplifier circuit design and then apply your knowledge to your own audio inventions.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 109
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics & Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Practical Radio Frequency Test and Measurement

    A Technician's Handbook
    • 1 Edición
    • Joseph Carr
    • Inglés
    Practical Radio Frequency Test and Measurement will teach readers the basics of performing the tests and measurements used in radio-frequency systems installation, proof of performance, maintenance, and troubleshooting. Practical Radio Frequency Test and Measurement teaches readers the basics of performing the tests and measurements used in radio-frequency systems installation, proof of performance, maintenance, and troubleshooting. Anyone interested in gaining more practical proficiency with RF, whether engineer, technician, amateur radio buff, or hobbyist, needs a copy of this book. Joseph J. Carr, himself an accomplished practitioner in this field, examines the instruments used in the various types of measurement before moving on to specific measurement methods. Carr includes information on basic theories of RF measurement, as well as test equipment, test set-ups, test and measurement procedures, and interpretation of results.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 111
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics & Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Astronomical Optics

    • 2 Edición
    • Daniel J. Schroeder
    • Inglés
    This book provides a unified treatment of the characteristics of telescopes of all types, both those whose performance is set by geometrical aberrations and the effect of the atmosphere, and those diffraction-limited telescopes designed for observations from above the atmosphere. The emphasis throughout is on basic principles, such as Fermat's principle, and their application to optical systems specifically designed to image distant celestial sources. The book also contains thorough discussions of the principles underlying all spectroscopic instrumentation, with special emphasis on grating instruments used with telescopes. An introduction to adaptive optics provides the needed background for further inquiry into this rapidly developing area.

  • Ship Stability for Masters and Mates

    • 5 Edición
    • Capt D R Derrett + 1 más
    • Inglés
    This well-established textbook has been fully reviewed and updated by a new author to ensure a modern coverage of the contents in depth. A new unique introduction has been written, giving ship types together with their general characteristics, to indicate to the reader actual or typical sizes of modern day merchant vessels.Four new chapters have been added dealing with Ship Squat, the Deadweight scale, Interaction and The Trim and Stability book. A new section, on Draft Surveys, is included in the Appendices. In order to give the student a better understanding of ship strength, four smaller but more detailed chapters replace the chapter covering this subject area in the previous edition.Ship Stability, with respect to motions, can be defined as the ability of a ship to return to an initial condition after she has been subjected to disturbing forces and moments. Ship Stability can also exist with respect to materials stresses and forces, where it is the ability to return to an initial state after being subjected to external or internal forces. Careful attention has been paid to the basic principles of ship stability and ship strength. Included is a generous provision of worked examples and exercise questions with answers. These ensure that the maritime student who works through this book will have a clear grasp of the topics covered. Up-to-date syllabuses and recent examination papers are included at the end of this book.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 110
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics & Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Multiaxial Fatigue and Fracture

    • 1 Edición
    • Volumen 25
    • E. Macha + 2 más
    • Inglés
    This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories:1. Proportional cyclic loading2. Non-proportional cyclic loading3. Variable amplitude and random loading4. Crack growthMost papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.

  • Handbook of Chemical Vapor Deposition

    Principles, Technology and Applications
    • 2 Edición
    • Hugh O. Pierson
    • Inglés
    Turn to this new second edition for an understanding of the latest advances in the chemical vapor deposition (CVD) process. CVD technology has recently grown at a rapid rate, and the number and scope of its applications and their impact on the market have increased considerably. The market is now estimated to be at least double that of a mere seven years ago when the first edition of this book was published. The second edition is an update with a considerably expanded and revised scope. Plasma CVD and metallo-organic CVD are two major factors in this rapid growth. Readers will find the latest data on both processes in this volume. Likewise, the book explains the growing importance of CVD in production of semiconductor and related applications.

  • Advanced Video Coding: Principles and Techniques

    The Content-based Approach
    • 1 Edición
    • Volumen 7
    • K.N. Ngan + 2 más
    • Inglés
    In recent years, the paradigm of video coding has shifted from that of a frame-based approach to a content-based approach, particularly with the finalization of the ISO multimedia coding standard, MPEG-4. MPEG-4 is the emerging standard for the coding of multimedia content. It defines a syntax for a set of content-based functionalities, namely, content-based interactivity, compression and universal access. However, it does not specify how the video content is to be generated. To generate the video content, video has to be segmented into video objects and tracked as they transverse across the video frames. This book addresses the difficult problem of video segmentation, and the extraction and tracking of video object planes as defined in MPEG-4. It then focuses on the specific issue of face segmentation and coding as applied to videoconferencing in order to improve the quality of videoconferencing images especially in the facial region. Modal-based coding is a content-based coding technique used to code synthetic objects that have become an important part of video content. It results in extremely low bit rates because only the parameters needed to represent the modal are transmitted. Model-based coding is included to provide background information for the synthetic object coding in MPEG-4. Lastly, MPEG-4, the first coding standard for multimedia content is described in detail. The topics covered include the coding of audio objects, the coding of natural and synthetic video objects, and error resilience. Advanced Video Coding is one of the first books on content-based coding and MPEG-4 coding standard. It serves as an excellent information source and reference for both researchers and practicing engineers.

Temas relacionados