Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Damage Mechanics in Engineering Materials

    • 1 Edición
    • Volumen 46
    • Jiann-Wen Woody Ju + 2 más
    • Inglés
    This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micro... constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.

  • Handbook of Air Pollution from Internal Combustion Engines

    Pollutant Formation and Control
    • 1 Edición
    • Eran Sher
    • Inglés
    This handbook is an important and valuable source for engineers and researchers in the area of internal combustion engines pollution control. It provides an excellent updated review of available knowledge in this field and furnishes essential and useful information on air pollution constituents, mechanisms of formation, control technologies, effects of engine design, effects of operation conditions, and effects of fuel formulation and additives. The text is rich in explanatory diagrams, figures and tables, and includes a considerable number of references.

  • Fibre Channel

    Connection To The Future
    • 2 Edición
    • FibreChannelIndustryAssoc.
    • Inglés
    The Fibre Channel Association is an international organization devoted to educating and promoting the Fibre Channel standard.

  • Video Microscopy

    • 1 Edición
    • Volumen 56
    • Inglés
    Video microscopy is used extensively in many life and biomedical science disciplines today, and is a useful tool for both cell biologists and students. This book presents how to track the dynamic changes that take place in the structure of living cells and in reconstituted preparations using video and digital imaging microscopy. Basic information, principles, and applications are also covered, as well as more specialized video microscopy techniques.

  • Steels: Metallurgy and Applications

    • 3 Edición
    • David Llewellyn + 1 más
    • Inglés
    STEELS: Metallurgy and Applications provides a metallurgical understanding of commercial steel grades and the design, manufacturing and service requirements that govern their application. The properties of different steels are described, detailing the effect of composition, processing and heat treatment. Where appropriate an introduction is given to standard specifications and design codes provided on component manufacture and property requirements for successful service performance.The book deals with steel products in some depth, in four chapters covering wide strip, structural steels, engineering and stainless steel grades. At the begining of each chapter an overview is given which details important features of the grades and a historical perspective of their development. Also featured are up to date information on steel prices and specifications.David Llewellyn has over thirty years experience in the steel industry and is currently lecturing in the Materials Engineering Department at University College Swansea.'..the book unfolds into an easily readable and a valuable source of highly relevant and contemporary information on steels' - METALS AND MATERIALS'.. a high quality product from all points of view' - INSTITUTE OF METALS AND MATERIALS AUSTRALASIA features up to date information on steel prices and specifications.

  • SMT Soldering Handbook

    • 2 Edición
    • RUDOLF STRAUSS
    • Inglés
    Surface Mount Technology has had a profound influence on the electronics industry, and has led to the use of new materials, techniques and manufacturing processes. Since the first edition of this book was written, electronic assemblies have continued to become still smaller and more complex, while soldering still remains the dominant connecting technique. This is a comprehensive guide to current methods of soldering components to their substrates, written by one of the founding fathers of the technology. It also covers component placement, the post-CFC technology of cleaning after soldering, and the principles and methods of quality control and rework. New sections deal with Ball-Grid-Array (BGA) technology, lead-free solders, no-clean fluxes, and the current standard specifications for solders and fluxes. Dr Rudolf Strauss has spent most of his working life with a leading manufacturer of solders and fluxes. He was responsible for a number of innovations including the concept of wave soldering, and for many years has been active as lecturer, consultant, and technical author. His book explains the principles of soldering and surface mount technology in practical terms and plain language, free from jargon. It is addressed to the man, or woman, who has to do the job, but it will also be of help in planning manufacturing strategy and in making purchasing decisions relating to consumables and equipment.

  • Risk Assessment and Management in the Context of the Seveso II Directive

    • 1 Edición
    • Volumen 6
    • Michalis D Christou + 1 más
    • Christian Kirchsteiger
    • Inglés
    The assessment and management of risk to society from the operation of chemical process plants and other industrial activities in which dangerous substances are produced, used, handled or stored will remain a topic of great importance in the next decade. In order to evaluate this specific risk on a qualitative and/or quantitative basis, the concepts of risk analyses are linked together in this book.The "performance based" and "goal oriented" regulatory requirements of the European Council's new "Seveso II Directive" for the identification of large scale industrial hazards, prevention of sudden and uncontrolled releases of dangerous substances from industrial plants and mitigation of serious consequences of industrial accidents to people and the environment are examined. The fact that risk assessment and management are key elements to such forms of regulation is also demonstrated.While the "Seveso II Directive" defines "what" has to be achieved on the control of major hazards involving dangerous substances within the European Union, the methods of risk assessment and management give guidance on "how" to achieve it. The text provides a practical guide for decision-makers in regulatory bodies and companies with a non-technical background. Scientists and engineers who are not yet familiar with the concepts of risk assessment and who want a survey of some fundamentals of, and principal results from, risk assessment studies and approaches primarily for applications in the context defined by the "Seveso Directives" will also find this book invaluable.

  • Dynamics and Control of Process Systems 1998 (2-Volume Set)

    • 1 Edición
    • C. Georgakis
    • Inglés
    The two volumes contain the Proceedings of the 5th IFAC DYCOPS Symposium that took place in Corfu, Greece between June 8-10, 1998. The Symposium was a continuation of the very successful series that used to be called DYCORD+, the last of which (DYCORD+ '95) took place in Denmark in 1995. It was sponsored by the IFAC Technical Committee on Chemical Process Control. The Symposium embraced the topic of Integration of Design and Control that had previously occurred as a separate IFAC workshop. The theme of "Technology Push vs. Technology Pull in the 21st Century" aimed to bring together researchers and developers of new methodologies (Technology Push) as well as users of these methodologies (Technology Pull). The major areas of interest were organized in the following categories: i) Reacting Process Systems, ii) Separation Process Systems, iii) Batch Process Systems, iv) Complex and Industrial Process Systems, and v) Interaction of Design and Control.

  • Viscoelastic Structures

    Mechanics of Growth and Aging
    • 1 Edición
    • Aleksey D. Drozdov
    • Inglés
    Viscoelastic Structures covers the four basic problems in the mechanics of viscoelastic solids and structural members: construction of constitutive models for the description of thermoviscoelastic behavior of polymers; mathematical modeling of manufacturing advanced composite materials; optimal-design of structural members and technological processes of their fabrication; and stability analysis for thin-walled structural members driven by time-varying loads.This book familiarizes the reader with state-of-the-art mathematical models for advanced materials and processes, and demonstrates their applications in modeling and simulating specific manufacturing processes. Viscoelastic Structures also demonstrates the effects of material, geometrical, and technological parameters on the characteristic features of viscoelastic structures.

  • Computational Electromagnetism

    Variational Formulations, Complementarity, Edge Elements
    • 1 Edición
    • Alain Bossavit
    • Inglés
    Computational Electromagnetism refers to the modern concept of computer-aided analysis, and design, of virtually all electric devices such as motors, machines, transformers, etc., as well as of the equipment inthe currently booming field of telecommunications, such as antennas, radars, etc.The present book is uniquely written to enable the reader-- be it a student, a scientist, or a practitioner-- to successfully perform important simulation techniques and to design efficient computer software for electromagnetic device analysis. Numerous illustrations, solved exercises, original ideas, and an extensive and up-to-date bibliography make it a valuable reference for both experts and beginners in the field. A researcher and practitioner will find in it information rarely available in other sources, such as on symmetry, bilateral error bounds by complimentarity, edge and face elements, treatment of infinite domains, etc.At the same time, the book is a useful teaching tool for courses in computational techniques in certain fields of physics and electrical engineering. As a self-contained text, it presents an extensive coverage of the most important concepts from Maxwells equations to computer-solvable algebraic systems-- for both static, quasi-static, and harmonic high-frequency problems.

  • Guide to Neural Computing Applications

    • 1 Edición
    • Lionel Tarassenko
    • Inglés
    Neural networks have shown enormous potential for commercial exploitation over the last few years but it is easy to overestimate their capabilities. A few simple algorithms will learn relationships between cause and effect or organise large volumes of data into orderly and informative patterns but they cannot solve every problem and consequently their application must be chosen carefully and appropriately. This book outlines how best to make use of neural networks. It enables newcomers to the technology to construct robust and meaningful non-linear models and classifiers and benefits the more experienced practitioner who, through over familiarity, might otherwise be inclined to jump to unwarranted conclusions. The book is an invaluable resource not only for those in industry who are interested in neural computing solutions, but also for final year undergraduates or graduate students who are working on neural computing projects. It provides advice which will help make the best use of the growing number of commercial and public domain neural network software products, freeing the specialist from dependence upon external consultants.

  • PC Interfacing

    • 1 Edición
    • Pei An
    • Inglés
    The main links with your PC and the outside world are the centronic port, used for connecting the printer, the RS232 port, used for the mouse, and the games port for a joystick. This book explores how these input/output (I/O) ports can be put to use through a range of other interfacing applications. This is especially useful for laptop and palmtop PCs which cannot be fitted with internal I/O cards. A novel approach is taken by this book, combining the hardware through which the ports can be explored, and the software programming needed to carry out a range of experiments.Circuits are provided for simple testing tools, and three experimental boards - which can also be purchased ready-made.A huge range of applications are considered, turning the PC into a flexible core of a variety of systems. External devices considered include opto-isolator drivers, power drivers, LED drivers, relay drivers, special driver ICs, and methods of driving opto-isolated zero-crossing solid state relays, stepper motors, sound generating devices and displays. Ways of gathering information from the outside world are given, as well as connection to digital devices, remote control and digital communication. As well as teaching in this field, Pei An has written numerous articles for magazines such as Electronics World and Electronics Today International.

  • Cognitive Reliability and Error Analysis Method (CREAM)

    • 1 Edición
    • E. Hollnagel
    • Inglés
    The growing dependence of working environments on complex technology has created many challenges and lead to a large number of accidents. Although the quality of organization and management within the work environment plays an important role in these accidents, the significance of individual human action (as a direct cause and as a mitigating factor) is undeniable. This has created a need for new, integrated approaches to accident analysis and risk assessment.This book detailing the use of CREAM is, therefore, both timely and useful. It presents an error taxonomy which integrates individual, technological and organizational factors based on cognitive engineering principles. In addition to the necessary theoretical foundation, it provides a step-by-step description of how the taxonomy can be applied to analyse as well as predict performance using a context-dependent cognitive model.CREAM can be used as a second-generation human reliability analysis (HRA) approach in probabilistic safety assessment (PSA), as a stand-alone method for accident analysis and as part of a larger design method for interactive systems. In particular, the use of CREAM will enable system designers and risk analysts to: • identify tasks that require human cognition and therefore depend on cognitive reliability• determine the conditions where cognitive reliability and ensuing risk may be reduced• provide an appraisal of the consequences of human performance on system safety which can be used in PSA.

  • The Design Analysis Handbook

    A Practical Guide to Design Validation
    • 1 Edición
    • N. Edward Walker
    • Inglés
    "...A book that should be on the shelf of every digital or analog electronic-system designer." - Frank Goodenough, Electronic DesignThis Handbook offers design engineers and managers immediately useful, meat-and-potatoes techniques for achieving design validation by analysis in an easy-to-read style. The book contains numerous useful and interestingtips for electronics circuit designers. Examples of rectifier circuits, power supplies, digital timing, thermal analysis, grounding and layout, and EMI/noise control are examined in detail with fully worked-out numerical examples.If you need to create reliable, cost-effective, optimized designs, The Design Analysis Handbook provides a practical framework for integrating quality into the design process from start to finish. The methodology used is called Worst Case Analysis Plus (WCA+), a design-validation tool that demands thoroughness and analytical thinking by the user.A guide to assessing and validating circuit design, The Design Analysis Handbook presents processes and mathematical tools in a straightforward, real-world manner. Unique features of the approach include chapters on safety, bad science, and surviving high-pressure design projects.N. Edward Walker is the president of Design/Analysis Consultants, Inc., based in Tampa, Florida. The Handbook is based on DACI's extensive experience in the design and analysis of highly-reliable electronic systems.

  • Intelligent Manufacturing Systems 1997

    • 1 Edición
    • Jongyoung Kim
    • Inglés
    IMS'97, the fourth in the series of IFAC Workshops on Intelligent Manufacturing Systems, was held in Seoul, Korea, on July 21-23, 1997. It was sponsored by the IFAC Technical Committee on Advanced Manufacturing Technology and organized by the Engineering Research Center for Advance Control and Instrumentation at Seoul National University on behalf of the Institute of Control, Automation and Systems Engineers in Korea. Rapid progress in the area of modern manufacturing is probably most evident through the developments in intelligent manufacturing systems. The same fast advancements have made the objective of achieving a balanced technical program a challenging task. The International Program Committee (IPC) wanted the Workshop to include the most notable and recent results, but still to reflect the versatility of maturing IMS technologies. In the Workshop, the importance of intelligence in modern manufacturing has gained considerable recognition from engineers and researchers due to today's unforeseen manufacturing environment change. This Workshop focused on the issue "intelligent manufacturing," especially, with two intriguing keynote speeches, a special invited session on the worldwide IMS Project and two tutorial programs as well as the 64 papers from 16 countries worldwide. We do hope that this event has provided the excellent opportunity to identify the future trends as well as exchange and learn ideas and experiences in intelligent manufacturing.

  • Hickman's Analog and RF Circuits

    • 1 Edición
    • Ian Hickman
    • Inglés
    Hickman's latest guide is essential reading for anyone designing analog circuits. This book, along with the recent Analog Circuits Cookbook also available from Newnes, will enlighten, inform, interest and even amuse readers, and give them the ability to tackle analog and RF design problems with confidence. Based on articles published in Electronics World, this book covers such topics as RF amplifiers, oscillator design and behaviour, waveform analysis, optoelectronics, filters and op-amps, as well as offering intriguing insights in chapters such as Cautionary Tales for Circuit Designers, Circuit Reflections and Is Matching Easy? Ian Hickman is one of the world's leading analog and RF engineers. Using illustrations and examples rather than tough mathematical theory, Ian Hickman presents a wealth of ideas and tips based on his own workbench experience.

  • Electrical Safety Engineering

    • 1 Edición
    • W. Fordham-Cooper
    • Inglés
    Revised byD.A. Dolbey JonesSenior Engineering InspectorElectrical Safety Engineering deals with the theory and practice of the safe design, installation and operation of industrial electrical equipment. It is well established as the leading comprehensive source of reference on electrical safety.This third edition incorporates revisions that cover the Electricity at Work Regulations 1989, EC Directives on safety matters and many recent developments in safety legislation and guidance publications. W Fordham Cooper drew on his long experience as HM Electrical Inspector of Factories and a consultant to the Insurance Technical Bureau to write this wide-ranging work. D A Dolbey Jones, who has revised this classic for its third edition, adds his own insights gained as an HM Senior Electrical Inspector with the Health and Safety Executive, responsible for steering the project on the Electricity at Work Regulations and the official Memorandum of Guidance on the Regulations;and as a Senior Engineering Inspector with the Department of Energy (now the DTI) . Published guidance and other useful reference material is signposted throughout the book. Two new appendices deal with essential up-to-date publications.

  • Quality Assurance in Adhesive Technology

    Eureka Project EU 716
    • 1 Edición
    • A W Espie + 2 más
    • Inglés
    This special report with user-friendly software has been produces following a collaboration between the Centre for Adhesives technology at TWI, Cranfield University and the DTI. The three-year project identified that highlighting design and production issue during very early stages of design enabled potential problem areas to be recognised and avoided. The team have therefore developed a generic quality assurance model to pinpoint the issues needing to be addressed well before a component reaches the production stage.The software is extremely user-friendly and comes with a flexible menu selection which enables the model to be customised to particular manufacturing requirements. It will be widely welcomed by designers and engineers involved with any products using adhesives or sealants.

  • Missile Guidance and Pursuit

    Kinematics, Dynamics and Control
    • 1 Edición
    • N A Shneydor
    • Inglés
    The continuing evolving capability of guided weapons demands ever more knowledge of their development. This modern and comprehensive book covers the control aspect of guidance of missiles, torpedoes, robots, and even animal predators, from the viewpoint of the pursuer. The text studies trajectories, zones of interception, the required manoeuvre effort, time of flight, launch envelopes, and stability of the guidance process. Mathematics at first-year university level is the only prerequisite. Acquaintance with feedback control theory would be helpful to the reader.

  • Circuit Analysis

    • 1 Edición
    • J E Whitehouse
    • Inglés
    This text presents the fundamentals of circuit analysis in a way suitable for first and second year undergraduate courses in electronic or electrical engineering. It is very much a ‘theme text’ and not a work book. The author is at pains to follow the logical thread of the subject, showing that the development of topics, one from the other, is not ad hoc as it can sometimes appear. A case in point is the application of graph theory to justify the derivation of the Node- and Mesh-equations from the more extensive set of Kirchhoff current and voltage equations. The topology of networks is stressed, again with the aid of graph theory.The Fourier series is discussed at an early stage in regard to time-varying voltages to pave the way for sinusoidal analysis, and then dealt with in a later chapter. The complex frequency is presented at the earliest opportunity with ‘steady a.c.’ subsequently seen as a special case. The use of Laplace transformation appears as an operational method for the solution of differential equations which govern the behaviour of all physical systems. However, more emphasis is laid on the use of impedances as a means of bypassing the need to solve, or indeed even having to write down, differential equations.The author discusses the role of network duals in circuit analysis, and clarifies the duality of Thevenin’s and Norton’s equations, and also exploits time/frequency duality of the Fourier transform in his treatment of the convolution of functions in time and frequency.Worked examples are given throughout the book, together with chapter problems for which the author has provided solutions and guidance.

  • Pneumatic Handbook

    • 8 Edición
    • A. Barber
    • Inglés
    Accepted as the standard reference work on modern pneumatic and compressed air engineering, the new edition of this handbook has been completely revised, extended and updated to provide essential up-to-date reference material for engineers, designers, consultants and users of fluid systems.

  • Plastic Limit Analysis of Plates, Shells and Disks

    • 2 Edición
    • Volumen 43
    • M.A. Save + 2 más
    • Inglés
    This revised and updated edition of a book first published in 1972 has kept the general features of the first edition but as could be expected after two decades there are also substantial differences. For instance optimal design has been completely deleted as the developments in this field have been so great that it warrants a book in itself. The fundamental concepts based on Drucker's postulate rather than those of Prager's assumptions function have been introduced. Problems of cyclic loading have been given some more extensive treatment, both in the general theory and in applications. General indications and references have been added for reinforced concrete plates and shells. A general presentation of the yield condition for both plates and shells has been included and the section on the influence of axial force in plates has been almost re-written. Finally, a chapter has been added exclusively devoted to the numerical approach to limit load and shake-down load evaluation. Like the previous edition the book is directed towards engineering applications. The theory is rigorously developed and is therefore of great use to engineering students in plastic limit analysis. Furthermore, applications to metal and reinforced concrete plates and shells and to metal disks are treated by both analytical and numerical approaches.

  • Computational Wind Engineering 2

    • 1 Edición
    • R.N. Meroney + 1 más
    • Inglés
    The Second International Computational Wind Engineering Symposium was held in Colorado, USA during August 1996 and presented papers on the popular application of CFD concepts. These proceedings contain a set of invited papers providing state-of-the-art reviews on subjects such as CFD turbulence models, bluff body aerodynamics, terrain aerodynamics and building aerodynamics. Individual session papers reflect on recent methodologies and innovations on CFD techniques applied to flow about bluff bodies immersed in shear layers, bridge aerodynamics, air pollution aerodynamics, mesoscale predictions of flow over complex terrain and the application of advanced numerical method strategies to these topics.

  • Advanced Materials for Interconnections

    • 1 Edición
    • Volumen 66
    • Th. Gessner
    • Inglés
    The conference "Advanced Materials for Interconnections" took place in Strasbourg on 4-7 June 1996 hosted by the EMRS Society. Based on the recent trends in microelectronics the main topics of the conference were new materials for interconnects like special aluminum alloys, tungsten and copper as well as low k dielectric materials.64 Papers were presented at the conference and 51 of these are contained as full length papers within this volume of Microelectronic Engineering.The proceedings are divided into 5 chapters. Chapter 1 related to Metallization discusses cluster equipment for IC manufacturing, copper advanced technology, gap filling, mechanical reliability, deposition technology, electroless and electro-plating, copper metallization copper interconnects and patterning of aluminum. Chapter 2, Process Integration, discusses multilevel interconnect, study on thin-film SOI devices, wet cleanings, influence of material characteristics and deposition processes, copper contamination and metallization, plasma behaviour, CMP processes, sub-micron inverse metallisation, interconnect formation and mechanical polishing investigations. Chapter 3 covers Barriers, and chapter 4 studies, evaluates and monitors Dielectrics. The final chapter looks at modelling comparisons.

  • Practical Introduction to Pumping Technology

    • 1 Edición
    • Uno Wahren
    • Inglés
    Here is a convenient, concise reference book for pump users, application engineers, technicians, and buyers. It contains, in condensed form, valuable information on selecting centrifugal and positive-displacemen... pumps for given applications, creating the necessary documentation, choosing equipment manufacturers, and checking vendor data. You will find a complete explanation of the types of pumps and the terms and parameters used in pump applications. This book outlines the data required by the client, engineer, and buyer to obtain a comprehensive quote.

  • Image Processing and Pattern Recognition

    • 1 Edición
    • Volumen 5
    • Cornelius T. Leondes
    • Inglés
    Image Processing and Pattern Recognition covers major applications in the field, including optical character recognition, speech classification, medical imaging, paper currency recognition, classification reliability techniques, and sensor technology. The text emphasizes algorithms and architectures for achieving practical and effective systems, and presents many examples. Practitioners, researchers, and students in computer science, electrical engineering, andradiology, as well as those working at financial institutions, will value this unique and authoritative reference to diverse applications methodologies.

  • Fatigue Design of Components

    • 1 Edición
    • Volumen 22
    • G. Marquis + 1 más
    • Inglés
    This volume contains a selection of papers presented at Fatigue Design 95 held in Helsinki, Finland from 5-8 September 1995. The papers have been peer reviewed and present practical aspects for the design of components and structures to avoid fatigue failure. Topics covered include: fatigue design experiences, ground vehicle components, component reliability, multiaxial fatigue, notch analysis, service loading, welded structures, probabilistics aspects in fatigue, fatigue design optimization.

  • Genetic Programming

    An Introduction
    • 1 Edición
    • Wolfgang Banzhaf + 3 más
    • Inglés
    Since the early 1990s, genetic programming (GP)—a discipline whose goal is to enable the automatic generation of computer programs—has emerged as one of the most promising paradigms for fast, productive software development. GP combines biological metaphors gleaned from Darwin's theory of evolution with computer-science approaches drawn from the field of machine learning to create programs that are capable of adapting or recreating themselves for open-ended tasks.This unique introduction to GP provides a detailed overview of the subject and its antecedents, with extensive references to the published and online literature. In addition to explaining the fundamental theory and important algorithms, the text includes practical discussions covering a wealth of potential applications and real-world implementation techniques. Software professionals needing to understand and apply GP concepts will find this book an invaluable practical and theoretical guide.

  • Heat Pipe Technology: Theory, Applications and Prospects

    • 1 Edición
    • C. Dixon + 1 más
    • I. Sauciuc + 2 más
    • Inglés
    Heat pipes today find many applications, in areas such as electronics cooling, diecasting and injection moulding, heat recovery and energy conservation, de-icing, and manufacturing process temperature control.Heat Pipe Technology: Theory, Applications and Prospects contains the proceedings of an important international gathering of those at the cutting edge of research in the field, with representatives of more than 20 countries. In addition to the finest technical papers, a particularly valuable feature is the inclusion of a series of regional surveys portraying the latest developments worldwide.The inherent characteristics of heat pipes (passiveness, absence of moving parts, high thermal efficiency) suggest for them an increasingly major role in the evolution of new thermal engineering systems in the years ahead. This volume will undoubtedly be an important resource for researchers worldwide in heat pipe technology.

  • Mechanics of Materials 2

    The Mechanics of Elastic and Plastic Deformation of Solids and Structural Materials
    • 3 Edición
    • E.J. Hearn
    • Inglés
    One of the most important subjects for any student of engineering or materials to master is the behaviour of materials and structures under load. The way in which they react to applied forces, the deflections resulting and the stresses and strains set up in the bodies concerned are all vital considerations when designing a mechanical component such that it will not fail under predicted load during its service lifetime.Building upon the fundamentals established in the introductory volume Mechanics of Materials 1, this book extends the scope of material covered into more complex areas such as unsymmetrical bending, loading and deflection of struts, rings, discs, cylinders plates, diaphragms and thin walled sections. There is a new treatment of the Finite Element Method of analysis, and more advanced topics such as contact and residual stresses, stress concentrations, fatigue, creep and fracture are also covered. Each chapter contains a summary of the essential formulae which are developed in the chapter, and a large number of worked examples which progress in level of difficulty as the principles are enlarged upon. In addition, each chapter concludes with an extensive selection of problems for solution by the student, mostly examination questions from professional and academic bodies, which are graded according to difficulty and furnished with answers at the end.

  • Waste Materials in Construction

    Putting Theory into Practice
    • 1 Edición
    • Volumen 71
    • G.J. Senden + 2 más
    • Inglés
    This book presents the proceedings of the 3rd International Conference on Waste Materials in Construction, held in June 1997. The papers presented give the state of the art on leaching of materials and products, demonstration projects and product development. Results of workshops on immobilisation and quality control are also presented. A good overview of the latest results on the application of various materials in construction, based on both technical and environmental data, is provided. The book provides a unique opportunity for environmental researchers, environmental consultants, policy-makers, and those involved in the construction industry to gain the latest information on the subject.

  • Computational Methods for Process Simulation

    • 2 Edición
    • W. Fred Ramirez
    • Inglés
    Process Modelling and simulation have proved to be extremely successful engineering tools for the design and optimisation of physical, chemical and biochemical processes. The use of simulation has expanded rapidly over the last two decades because of the availability of large high-speed computers and indeed has become even more widespread with the rise of the desk-top PC resources now available to nearly every engineer and student. In the chemical industry large, realistic non-linear problems are routinely solved with the aid of computer simulation. This has a number of benefits, including easy assessment of the economic desirability of a project, convenient investigation of the effects of changes to system variables, and finally the introduction of mathematical rigour into the design process and inherent assumptions that may not have been there before. Computational Methods for Process Simulation develops the methods needed for the simulation of real processes to be found in the process industries. It also stresses the engineering fundamentals used in developing process models. Steady state and dynamic systems are considered, for both spatially lumped and spatially distributed problems. It develops analytical and numerical computational techniques for algebraic, ordinary and partial differential equations, and makes use of computer software routines that are widely available. Dedicated software examples are available via the internet.

  • Valve and Transistor Audio Amplifiers

    • 1 Edición
    • John Linsley Hood
    • Inglés
    The audio amplifier is at the heart of audio design. Its performance determines largely the performance of any audio system. John Linsley Hood is widely regarded as the finest audio designer around, and pioneered design in the post-valve era. His mastery of audio technology extends from valves to the latest techniques. This is John Linsley Hood's greatest work yet, describing the milestones that have marked the development of audio amplifiers since the earliest days to the latest systems. Including classic amps with valves at their heart and exciting new designs using the latest components, this book is the complete world guide to audio amp design. John Linsley Hood is responsible for numerous amplifier designs that have led the way to better sound, and has also kept up a commentary on developments in audio in magazines such as The Gramophone, Electronics in Action and Electronics and Wireless World. He is also the author of The Art of Linear Electronics and Audio Electronics published by Newnes.

  • Advances in Applied Mechanics

    • 1 Edición
    • Volumen 34
    • Inglés
    This highly acclaimed series provides survey articles on the present state and future direction of research in important branches of applied mechanics

  • Structural and Residual Stress Analysis by Nondestructive Methods

    Evaluation - Application - Assessment
    • 1 Edición
    • V. Hauk
    • Inglés
    The field of stress analysis has gained its momentum from the widespread applications in industry and technology and has now become an important part of materials science. Various destructive as well as nondestructive methods have been developed for the determination of stresses. This timely book provides a comprehensive review of the nondestructive techniques for strain evaluation written by experts in their respective fields.The main part of the book deals with X-ray stress analysis (XSA), focussing on measurement and evaluation methods which can help to solve the problems of today, the numerous applications of metallic, polymeric and ceramic materials as well as of thin-film-substrate composites and of advanced microcomponents. Furthermore it contains data, results, hints and recommendations that are valuable to laboratories for the certification and accreditation of their stress analysis.Stress analysis is an active field in which many questions remain unsettled. Accordingly, unsolved problems and conflicting results are discussed as well. The assessment of the experimentally determined residual and structural stress states on the static and dynamic behavior of materials and components is handled in a separate chapter.Students and engineers of materials science and scientists working in laboratories and industries will find this book invaluable.

  • Hydrodynamic Lubrication

    Bearings and Thrust Bearings
    • 1 Edición
    • Volumen 33
    • J. Frene + 4 más
    • Inglés
    Hydrodynamic Lubrication is the culmination of over 20 years close, collaborative work by the five authors and discusses the practical use of the formalization of low pressure lubrication. The work concentrates on the developments to journal and thrust bearings and includes subjects such as:• the dynamic behaviour of plain and tilting-pads• the thermal aspects• the positive and negative effects of non-cyclindricity and shape defects resulting from manufacturing or operation• the effects of inertia• the appearance of Taylor's vortices and of turbulence and their repercussions.The book contains an abundance of test results objectively compared with theoretical conclusions and a chapter on "technical considerations" to ensure that draft mechanisms will work satisfactorily under the imposed conditions.Hydrodyna... Lubrication is an essential reference book for future and practising engineers who want to put hydrodynamic and hydrostatic journal bearings and thrust bearings into operation under conditions of total safety.

  • Deformation and Progressive Failure in Geomechanics

    • 1 Edición
    • A. Asaoka + 2 más
    • Inglés
    Progressive failure has been a classical problem in the field of geotechnical engineering and has attracted considerable attention in connection with slope stability and foundation problems. It is associated with strain localization or shear banding and is also related to damage in material structures. As knowledge of the progressive failure mechanism increases, it is now necessary to establish effective communications between researchers and engineers.The International Symposium on Deformation and Progressive Failure in Geomechanics provided an opportunity for discussing recent advances in this area.A total of 136 papers were contributed from 22 countries. As well as these, the symposium proceedings also contain 8 interim technical reports on the subject by the members of the Asian Technical Committee of the International Society for Soil Mechanics and Foundation Engineering and the Japanese Geotechnical Society National Committee on Progressive Failure in Geo-structures.

  • Flow-Induced Alignment in Composite Materials

    • 1 Edición
    • T.D. Papathanasiou + 1 más
    • Inglés
    The purpose of aligning short fibres in a fibre-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibres, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material.Flow induced alignment in composite materials details, in a single volume, the science, processing, applications, characterisation and properties of composite materials reinforced with short fibres that have been orientated in a preferred direction by flows arising during processing. The topics discussed include fibre alignment and materials rheology; processes that can produce fibre alignment in polymeric, liquid crystal polymeric, and metallic composites; materials characterization and mechanical properties; and modelling of processes and materials properties.The technology of fibre-reinforced composites is continually evolving and this book provides timely and much needed information about this important class of engineering materials. The bookis an essential reference work for industry and an indispensable guide for the research worker, advanced student and materials scientist.

  • Neural Networks and Pattern Recognition

    • 1 Edición
    • Omid Omidvar + 1 más
    • Inglés
    This book is one of the most up-to-date and cutting-edge texts available on the rapidly growing application area of neural networks. Neural Networks and Pattern Recognition focuses on the use of neural networksin pattern recognition, a very important application area for neural networks technology. The contributors are widely known and highly respected researchers and practitioners in the field.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 99
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics & Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Structural Acoustics and Vibration

    Mechanical Models, Variational Formulations and Discretization
    • 1 Edición
    • Roger Ohayon + 1 más
    • Inglés
    Structural Acoustics and Vibration presents the modeling of vibrations of complex structures coupled with acoustic fluids in the low and medium frequency ranges. It is devoted to mechanical models, variationalformulati... and discretization for calculating linear vibrations in the frequency domain of complex structures. The book includes theoretical formulations which are directly applicable to develop computer codes for the numerical simulation of complex systems, and gives a general scientific strategy to solve various complex structural acoustics problems in different areas such as spacecraft, aircraft, automobiles, and naval structures. The researcher may directly apply the material of the book to practical problems such as acoustic pollution, the comfort of passengers, and acoustic loads induced by propellers. Structural Acoustics and Vibration considers the mechanical and numerical aspects of the problem, and gives original solutions to the predictability of vibrations of complex structures interacting with internal and external, liquid and gaseous fluids. It is a self-contained general synthesis with a didactic presentation and fills the gap between analytical methods applied to simple geometries and statistical methods, which are useful in high frequency structural acoustic problems.

  • Designing Quiet Structures

    A Sound Power Minimization Approach
    • 1 Edición
    • Gary H. Koopmann + 1 más
    • Inglés
    This book is the first of its kind. It provides the reader with a logical and highly quantitative means of including noise as a parameter in the early design stages of a machine or structure. The unique and unified methodology builds upon the familiar disciplines of acoustics, structural dynamics and optimization. It also exemplifies the art of simplification - the essence of all good engineering design. Strategies for designing quiet structures require extensive analytical and experimental tools. For computing the sound power from complex structures the authors recommend a new 3-D, lumped parameter formulation. This fully developed, user-friendly program can be applied generally to noise-control-by-des... problems. Detailed instructions for running the application are given in the appendix as well as several sample problems to help the user get started. The authors also describe a new instrument: a specially developed resistance probe used to measure a structure=92s acoustic surface resistance. As an example, the procedure is outlined for measuring the valve cover of an internal combustion engine. Indeed, throughout the book the reader is presented with actual experiments, numerical and physical that they can replicate in their own laboratory. This is a must-have book for engineers working in industries that include noise control in the design of a product. Its practical and didactic approach also makes it ideally suited to graduate students.

  • Wear of Materials

    • 1 Edición
    • R.G. Bayer + 1 más
    • Inglés
    This volume contains the proceedings from the Eleventh Wear of Materials conference held in San Diego in April 1997. As 1997 marked the 20th anniversary of the conference a review of the conference history has been published including personal recollections from past Chairmen. In addition 67 full papers have been published together with 14 communications and case studies, providing an important information resouce for engineers and researchers worldwide.

  • Multirate and Wavelet Signal Processing

    • 1 Edición
    • Volumen 8
    • Bruce W. Suter
    • Inglés
    This innovative and in-depth book integrates the well-developed theory and practical applications of one dimensional and multidimensional multirate signal processing. Using a rigorous mathematical framework, it carefully examines the fundamentals of this rapidly growing field. Areas covered include: basic building blocks of multirate signal processing; fundamentals of multidimensional multirate signal processing; multirate filter banks; lossless lattice structures; introduction to wavelet signal processing. Multirate and Wavelet Signal Processing forms the basis for a graduate course in multirate signal processing. It includes an introduction to wavelet signal processing and emphasizes topics of ever-increasing importance for a wide range of applications. Concise and easy-to-read, this book is also a useful primer for professional engineers.

  • Signal and Image Representation in Combined Spaces

    • 1 Edición
    • Volumen 7
    • Yehoshua Zeevi + 1 más
    • Inglés
    This volume explains how the recent advances in wavelet analysis provide new means for multiresolution analysis and describes its wide array of powerful tools. The book covers variations of the windowed Fourier transform, constructions of special waveforms suitable for specific tasks, the use of redundant representations in reconstruction and enhancement, applications of efficient numerical compression as a tool for fast numerical analysis, and approximation properties of various waveforms in different contexts.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 101
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Maintenance Strategy

    • 1 Edición
    • Anthony Kelly
    • Inglés
    Devising optimal strategy for maintaining industrial plant can be a difficult task of daunting complexity. This book aims to provide the plant engineer with a comprehensive and systematic approach, a framework of guidelines, for tackling this problem, i.e. for deciding maintenance objectives, formulating equipment life plans and plant maintenance schedules, designing the maintenance organisation and setting up appropriate systems of documentation and control. The author, Anthony Kelly, an experienced international consultant and lecturer on this subject, calls his approach BUSINESS-CENTRED MAINTENANCE (BCM) because it springs from, and is driven by, the identification of business objectives, which are then translated into maintenance objectives and which underpin the maintenance strategy formulation. For the first time maintenance management is analysed from the perspective of the whole company and thus makes sense not only technologically but also in economic and business terms.

  • Practical Machinery Management for Process Plants: Volume 2

    Machinery Failure Analysis and Troubleshooting
    • 3 Edición
    • Heinz P. Bloch + 1 más
    • Inglés
    This newly expanded edition discusses proven approaches to defining causes of machinery failure as well as methods for analyzing and troubleshooting failures.

  • Maintenance Organization and Systems

    • 1 Edición
    • Anthony Kelly
    • Inglés
    The profitability of any industry, in any technological sector - power, process, manufacturing, mineral extraction, transport, communication, etc - will be profoundly influenced by the reliability and performance of the plant which it uses. It is therefore vital that all possible measures are taken to maximise the productivity in use, and to minimise the maintenance costs and the downtime, of that plant. This book explains, in a clear and concise manner, the various organization structures that are needed for doing just that, the information systems with which those structures will need to be resourced, and the steps that will have to be taken in order to bring those structures and systems into being. The author, Anthony Kelly, an experienced international consultant and lecturer on this subject, calls his approach BUSINESS-CENTRED MAINTENANCE (BCM) because it springs from, and is driven by, the identification of business objectives, which are then translated into maintenance objectives and which underpin the maintenance strategy formulation. For the first time maintenance management is analysed from the perspective of the whole company and thus makes sense not only technologically but also in economic and business terms.

  • Practical Electric Motor Handbook

    • 1 Edición
    • Irving Gottlieb
    • Inglés
    Experienced product designers are increasingly expected to be adept at incorporating a range of components into their designs. Students and experimenters too need to look beyond basic circuits and devices to achieve adequate design solutions. For those experienced in engineering design, this is the guide to electric motors. This book will allow engineers and designers to marry the technologies they know about with motor technology, and hence to incorporate motors into their products. Of the many good books on motors, such as Electric Motors and Drives by Hughes, none offer the engineering professional a tailored guide to motors taking into account their expertise. This book fills that gap. Irving Gottlieb is a leading author of many books for practising engineers, technicians and students of electronic and electrical engineering.

Temas relacionados