Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Digital Moving Pictures - Coding and Transmission on ATM Networks

    • 1 Edición
    • Volumen 3
    • J.-P. Leduc
    • Inglés
    Image communication technologies have advanced rapidly in recent years and the book series, Advances in Image Communication is dedicated to documenting these developments. Third in the series, this publication contributes as effectively as its forerunners to the multidisciplinary overview afforded by the series as a whole. At the same time, it stands alone as a comprehensive synopsis of its own particular area of interest.The book specifically explores two complementary topics, namely:the coding algorithms made to compress the data rate of digital moving-picture sequences (video-telephony, television [TV] and high-definition television [HDTV]) andthe transmission on Asynchronous Transfer Mode [ATM] networks (packet-switching transmission media). It provides an in-depth view of the current state-of-the-art and endeavors to stimulate increasing research efforts for the future.

  • Oxygen in Silicon

    • 1 Edición
    • Volumen 42
    • Inglés
    This volume reviews the latest understanding of the behavior and roles of oxygen in silicon, which will carry the field into the ULSI era from the experimental and theoretical points of view. The fourteen chapters, written by recognized authorities representing industrial and academic institutions, cover thoroughly the oxygen related phenomena from the crystal growth to device fabrication processes, as well as indispensable diagnostic techniques for oxygen.

  • Advances in Applied Mechanics

    • 1 Edición
    • Volumen 31
    • Inglés
    This acclaimed series provides survey articles on the present state and future direction of research in important branches of applied mechanics. Volume 31 provides the following fully referenced, and comprehensive articles:A New Integrable Shallow Water Equation discusses the initial value problem and soliton solutions for a newly discovered, completely integrable, dispersive shallow water equation as well as the elastic collision properties of the N-soliton solutionThe Onset and Development of Thermal Convection in Fully Developed Shear Flows focuses on a few basic states involving a Boussinesq fluid and fully developed forced flows, mainly of the Couette or Poiseuille typeVortex Element Methods for Flow Simulation covers vortex patches and filaments and a critical account of difficulties, limitations, and continuing efforts to improve the simulations of laminar or peturbulent flows through the use of vortex elementmethodsMicrom... Constitutive Description of Thermoelastic Martensitic Transformations is concerned with the micromechanics description of transformation plasticity, incorporating microstructure, crystallography, thermodynamics and micromechanics into the continuum formulation of the macroscopic constitutive behavior.

  • Dissipative Processes in Tribology

    • 1 Edición
    • D. Dowson + 4 más
    • Inglés
    This book discusses dissipative phenomena, in particular the origins of friction at all scales, in mechanics, physics and chemistry, encountered in all fields of tribology, from thick film lubrication to dry friction.

  • Satellite Communications

    Principles and Applications
    • 1 Edición
    • David Calcutt + 1 más
    • Inglés
    Satellites are increasingly used for global communications, as well as for radio and television transmissions. With the growth of mobile communications, and of digital technology, the use of satellite systems is set to expand substantially and already all students of electronics or communications engineering must study the subject.This book steers a middle path between offering a basic understanding of the process of communication by satellite and the methodology used; and the extensive mathematical analysis normally adopted in similar texts. It presents the basic concepts, using as much mathematical content as is necessary to make the process understandable. The principles introduced are backed up by examples of actual applications showing how professional systems engineers have achieved the required system performance capabilities. The practical systems chosen are representative of modern day applications and comprise an international communications system, an international maritime system and a regional system.

  • Tubular Wire Welding

    • 1 Edición
    • D Widgery
    • Inglés
    The use of tubular, or as it is often known, flux-cored wire has grown dramatically in the last thirty years. It is a versatile and productive weld material with wide applications. Yet this book is the first to provide fabricators with a comprehensive and unvarnished account of what tubular wires can do and how they do it. Based on the author's fifteen years' experience of developing and applying tubular wires, it brings together information not previously available in one place, some of which has never been published.

  • Coatings Tribology

    Properties, Techniques and Applications in Surface Engineering
    • 1 Edición
    • Volumen 28
    • K. Holmberg + 1 más
    • Inglés
    This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.

  • Electrooptics

    Phenomena, Materials and Applications
    • 1 Edición
    • Jose Manuel Cabrera + 1 más
    • Inglés
    This comprehensive text provides an understanding of the physical phenomenon behind electrooptics. It describes in detail modern electrooptic materials and operative physical mechanisms, and devotes a full chapter tothe new materials engineering that is contributing to the development of low-dimensional systems. The book also reviews device applications in both bulk and waveguide technologies.

  • Automotive Electrical Maintenance

    • 1 Edición
    • Stewart Robertson
    • Inglés
    This book describes how to carry out safely a range of basic servicing checks and replacements, such as they will be asked routinely to carry out in a general motor workshop. It assumes no scientific or mathematical background and includes numerous practical assignments to help develop understanding and questions to test comprehension.

  • Elsevier's Dictionary of Industrial Technology

    In English, German and Portuguese
    • 1 Edición
    • H.E. Philippsborn
    • Inglés
    Technical literature in the Portuguese language is very rare; this is the reason for the compilation of this technical dictionary. The material is rich in synonyms in each of the three languages, English, German and Portuguese.The dictionary encompasses some of the most important technical fields related to industrial activity, such as:Petrochemical industry. Geological history; Oil exploration, oil drilling, offshore drilling; Oil shale processing; Coal mining; Oil refining, cracking, distillation. Textile Industry. Machinery; Textile fabrics, fibres; Spinning, weaving, knitting, weaves, knits; Treatment and finishing, dyes. Leather Industry. Leather types; Leather treatment. Engineering Materials. Modified natural products; Synthetic plastics; Polymers, polycondensation products, polyaddition products; Glass; Paper, wood, glues, paints and varnishes; Metals. Cleaners Industry. Detergents; Waxes, emulsifiers. Industrial Processes. Fermentation; Catalysis and catalysts; Sulphuric-acid production. Machinebuilding Industry. Machines; Tools; Machine parts. Nucleonics, Nuclear Energy. Electrical Engineering. Electrical technology; Electronics; Semiconductor technology. Motor Car Industry. Motor car; Internal combustion engine; Lorries; Agricultural machines; Road construction machines.

  • FORTRAN 90 for Scientists and Engineers

    • 1 Edición
    • Brian H. Hahn
    • Inglés
    The introduction of the Fortran 90 standard is the first significant change in the Fortran language in over 20 years. this book is designed for anyone wanting to learn Fortran for the first time or or a programmer who needs to upgrade from Fortran 77 to Fortran 90.Employing a practical, problem-based approach this book provides a comprehensive introduction to the language. More experienced programmers will find it a useful update to the new standard and will benefit from the emphasis on science and engineering applications.

  • Foundations of Helicopter Flight

    • 1 Edición
    • S. Newman
    • Inglés
    The unique design problems which helicopters produce are many and complex. Through practical examples and illustrated case studies, supported by all the relevant theory, this primer text provides an accessible introduction which guides the reader through the theory, design, construction and operation of helicopters. Fundamental performance and control equations are developed, from which the book explores the rotor aerodynamic and dynamic characteristics of helicopters. Example calculations and performance predictions, reflecting current practice, show how to assess the feasibility of a design.

  • Plastics in the Automotive Industry

    • 1 Edición
    • J Maxwell
    • Inglés
    A survey of the role of plastics materials in the motor industry. It discusses progress in the different sectors of automotive engineering, and the possible effect of economic and environmental pressures on the growth of the plastics contribution. Emphasis is given to materials selection and the author explains how a material can be 'right' or 'wrong' for a particular job – and what extraneous factors could change things.

  • Applied Photonics

    • 1 Edición
    • Chai Yeh
    • Inglés
    Photonic circuitry is the first-choice technological advancement recognized by the telecommunications industry. Due to the speed, strength, and clarity of signal, photonic circuits are rapidly replacing electronic circuits in a range of applications. Applied Photonics is a state-of-the-art reference book that describes the fundamental physical concept of photonics and examines the most current information available in the photonics field. Cutting-edge developments in semiconductors, optical switches, and solitons are presented in a readable and easily understandable style, making this volume accessible, if not essential, reading for practicing engineers and scientists.

  • Automation Based Creative Design - Research and Perspectives

    • 1 Edición
    • A. Tzonis + 1 más
    • Inglés
    Computer technology has revolutionized many aspects of building design, such as drafting, management, construction - even building with robots. This revolution has expanded into the field of design creativity. Presented in this book is an up-to-date, comprehensive picture of research advances in the fast-growing field of informatics applied to conceptual stages in the generation of artifacts - in particular, buildings. It addresses the question how far and in what ways creative design can be intelligently automated.Among the topics covered are: the use of precedents; the relations between case-based, rule-based, and principle-based architectural design reasoning; product typology; artifact thesauruses; the inputting and retrieval of architectural knowledge; the visual representation and understanding of existing or projected built forms; empirical and analytical models of the design process and the design product; desktop design toolkits; grammars of shape and of function; multiple-perspective building data structures; design as a multi-agent collaborative process; the integration of heterogeneous engineering information; and foundations for a systematic approach to the development of knowledge-based design systems.The papers provide a link between basic and practical issues: - fundamental questions in the theory of artifact design, artifical intelligence, and the cognitive science of imagination and reasoning; - problems in the computerization of building data and design facilities; - the practical tasks of building conception, construction and evaluation. The automation of creative design is itself considered as an engineering design problem. The implications of current and future work for architectural education and research in architectural history, as well as for computer-integrated construction and the management of engineering projects are considered.

  • Properties and Applications of Diamond

    • 1 Edición
    • Eileen Wilks + 1 más
    • Inglés
    Properties and Applications of Diamond provides a unique consolidation of all useful information, as well as a comprehensive survey of literature. No other book covers this topical field with such breadth and clarity, making it both a fundamentalintroduct... and an invaluable on-going reference. '..very readable and has value for both the expert and the newcomer' - INDUSTRIAL DIAMOND REVIEW 'An excellent source of information for any researcher, student or industrial user' - CHOICE '..lucidlywritten, effectively illustrated..careful... referenced and logically presented' - AUSTRALIAN GEMMOLOGIST 'It is unique amongst other books of this type' - MATERIALS FORUM

  • Principles of Engineering Mechanics

    • 2 Edición
    • H. Harrison + 1 más
    • Inglés
    Students of engineering mechanics require a treatment embracing principles, practice an problem solving. Each are covered in this text in a way which students will find particularly helpful. Every chapter gives a thorough description of the basic theory, and a large selection of worked examples are explained in an understandable, tutorial style. Graded problems for solution, with answers, are also provided.Integrating statistics and dynamics within a single volume, the book will support the study of engineering mechanics throughout an undergraduate course. The theory of two- and three-dimensional dynamics of particles and rigid bodies, leading to Euler's equations, is developed. The vibration of one- and two-degree-of-freedo... systems and an introduction to automatic control, now including frequency response methods, are covered. This edition has also been extended to develop continuum mechanics, drawing together solid and fluid mechanics to illustrate the distinctions between Eulerian and Lagrangian coordinates.

  • Motorcyle Tuning: Chassis

    • 3 Edición
    • John Robinson
    • Inglés
    This third edition, in the same tradition as the second, is a vital servicing tool containing information covering virtually every motorcycle over 50cc sold in the UK since 1980. The author is technical editor of `Performance Bikes' and author of thewell known `Motorcycle Tuning' books.The book provides access to the most frequently used data for dealers, mechanics and enthusiasts who have to deal with a wide variety of machines and wish to compare the features of different models. A seperate section lists conversion tables, standard torque settings for threaded fasteners, tyre size codes, tyre speed and load schedules and addersses of importers. Machines are listed alphabetically by manufacturer and then in order of capacity or model number.

  • Advances in Heat Transfer

    • 1 Edición
    • Volumen 24
    • Inglés
    Advances in Heat Transfer is designed to fill the information gap between the regularly scheduled journals and university level textbooks, allowing for in-depth review articles on a broader scope than is allowable in either journals or texts.

  • Multiphase Flow and Fluidization

    Continuum and Kinetic Theory Descriptions
    • 1 Edición
    • Dimitri Gidaspow
    • Inglés
    Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and introducing the new dependent variable--the volume fraction of the dispersed phase. Exercises at the end of each chapterare provided for further study and lead into applications not covered in the text itself.

  • Foundation Engineering

    • 1 Edición
    • Volumen 75
    • S. Hansbo
    • Inglés
    The object of this book is to shed light on the most important design aspects encountered in foundation engineering and to present basic design principles representative of the developed part of the world. Modern geotechnical investigation methods and their interpretation are exemplified. The philosophy of the new European code for geotechnical design is presented. The most important and practical aspects of ground modification techniques are included. This book can be used as a textbook for senior undergraduate and graduate students. It can also serve as a combined text- and handbook for professional engineers working in the field of geotechnical engineering. Line drawings and photographs accompany the text.

  • Introduction to Continuum Mechanics

    • 3 Edición
    • W Michael Lai + 2 más
    • Inglés
    Introduction to Continuum Mechanics is a recently updated and revised text which is perfect for either introductory courses in an undergraduate engineering curriculum or for a beginning graduate course.Continuum Mechanics studies the response of materials to different loading conditions. The concept of tensors is introduced through the idea of linear transformation in a self-contained chapter, and the interrelation of direct notation, indicial notation, and matrix operations is clearly presented. A wide range of idealized materials are considered through simple static and dynamic problems, and the book contains an abundance of illustrative examples of problems, many with solutions.

  • Advanced Fiber Spinning Technology

    • 1 Edición
    • T. Nakajima
    • Inglés
    Translated from Japanese, this book details some of the most interesting developments of the last few decades in the field of fibre manufacture. Many of these have been the result of intensive study in industry and research institutes in Japan - the country at the forefront of research in fibre spinning technology.

  • Electron Beam Welding

    • 1 Edición
    • H Schultz
    • Inglés
    Translated from the German, this is a practical book for engineers which explains the trials, development and manufacturing processes involved in electron beam welding.

  • Mechanical Engineer's Data Handbook

    • 1 Edición
    • James Carvill
    • Inglés
    This text provides the student and professional mechanical engineer with a reference text of an essentially practical nature. It is uncluttered by text, and extensive use of illustrations and tables provide quick and clear access to information. It alsoincludes examples of detailed calculations on many of the applications of technology used by mechanical and production engineers, draughtsmen and engineering designers.Although mainly intended for those studying and practising mechanical engineering, a glance at the contents will show that it is also useful to those in related branches of engineering such as production, marine, offshore, mining, mineral and inparticular that of design. This reference book provides engineers with a wealth of useful material in a very compact and quickly accessible form.

  • Handbook of Polymer Composites for Engineers

    • 1 Edición
    • L C Hollaway
    • Inglés
    This book introduces the engineer to fibres and polymer matrices, which are the components of the polymer composites for structural engineering. The authors also provide a simple guide, in tabular form, to the principal fabrication techniques, the basic design formulae, and the methods for structural composites systems and connections.

  • Electrodeposition

    The Materials Science of Coatings and Substrates
    • 1 Edición
    • Jack W. Dini
    • Inglés
    Electrodeposition allows the "tailoring" of surface properties of a bulk material or, in the case of electroforming, the entire part. Deposits can be produced to meet a variety of designer demands. For this reason and for the possibilities that exist in terms of "new materials" for a variety of applications, a thorough understanding of the materials science of electrodeposition is of utmost importance. This book provides that understanding.

  • Motorcycle Tuning Two-Stroke

    • 2 Edición
    • John Robinson
    • Inglés
    In this well established book, now brought up to date in a second edition, the Technical Editor of `Performance Bikes' shows you how to evaluate your engine, how to assess what work you can undertake yourself, and what is best left to a specialist.The great attraction of the two-stroke is its enormous potential, contrasted with its appealing simplicity. Armed with little more than a set of files, you can make profound changes to the output power of a two-stroke. But these changes will increase thepower only if you know what you are doing. `Motor Cycle Tuning (Two-stroke)' will therefore guide you through the necessary stages which can enable a stock roadster engine can be turned into a machine capable of winning open-class races, for an outlay which is positively low by racing standards. Very few other books on engine development and most of these are either devoted to car engines or are out of date Promoted by PERFORMANCE BIKES

  • Advances in Applied Mechanics

    • 1 Edición
    • Volumen 30
    • Inglés

  • Low Cost Automation 1992

    Techniques, Components and Instruments, Applications
    • 1 Edición
    • Volumen 13
    • P. Albertos + 1 más
    • Inglés
    The main aim of this symposium was to bring together end-users and control system specialists to evaluate the possibilities for improvement of techniques, design procedures, components and instruments to encourage low cost automation; considering not only economic aspects but also improvements in productivity, reliability, flexibility and ease-of-application. Special emphasis was placed on small and medium sized enterprises. The technical sessions dealt with topics from process automation as well as from manufacturing automation.

  • The Chemistry of Artificial Lighting Devices

    Lamps, Phosphors and Cathode Ray Tubes
    • 1 Edición
    • Volumen 17
    • Richard C. Ropp
    • Inglés
    Both the early use of artificial lighting and current manufacturing methods concerning incandescent and fluorescent lamps are covered in this book. The protocols for manufacture of fluorescent lamp phosphors and those used in cathode ray tubes are also treated in some detail. This text surveys the amazing, vast array of artificial lighting devices known to date in terms of how they arose and are, or have been used by mankind.A complete description of the formulations and methodology for manufacturing all known phosphors is given. The book will serve as a repository of such phosphor manufacturing methods, including that of cathode ray tube phosphors. Methods of manufacture of lamp parts are also presented, including that of tungsten wire. The original approaches used are described as well as improvements in technology. These will serve as comparative methods for present day manufacture of these components. A history of the lamp industry is presented. Several methods are given which may serve as a source for further work in the lamp industry. Some of the earliest work has been applied in the laser industry to develop new types of discharge lasers. These include nitrogen-gas lasers and the rare gas (excimer) lasers. Previous work on lamps may also be applied in the development of new types of lasers.

  • Air Filtration

    An Integrated Approach to the Theory and Applications of Fibrous Filters
    • 1 Edición
    • R.C. Brown
    • Inglés
    The need for clean air has probably never been greater. Many industrial employees need to avoid exposure to airborne particulates, while certain industrial processes demand clean air of exceptional quality. Medical and biological fields rely on sterile air, while filtration can improve air quality in offices, homes and all types of transport.Filters act in a variety of complex and subtle ways. Each chapter introduces its subject matter simply, before tackling the problem in greater depth. The book therefore provides an excellent basis for detailed study, but is also invaluable to anyone needing an overview of the subject.

  • Thin Films in Tribology

    • 1 Edición
    • G. Dalmaz + 4 más
    • Inglés
    The tribological properties of relatively moving surfaces are greatly influenced by thin surface films which are of considerable importance in the design of machine components. From Victorian days when working lubricant films were calculated in tens of micrometres, to today when molecular dynamics simulations and even experiments are beginning to look at nanometre, single molecule thick films, the study of surfaces which is the tribologists' challenge has moved to finer and finer scales.The 66 papers in this volume provide reviews across the tribological field with thin films as their theme, giving a comprehensive and concise description on topics ranging from coatings and surface modification to bio-tribology. The articles provide the reader with an outline of their most effective application and potential uses in new technologies. The volume will be of interest not only to research workers and design engineers in the fields of new machine developments and lubrication, but also to engineers and students specialising in tribology.

  • Photonics in Switching

    • 1 Edición
    • John E. Midwinter
    • Paul F. Liao + 1 más
    • Inglés
    Photonics in Switching provides a broad, balanced overview of the use of optics or photonics in switching, from materials and devices to system architecture. The chapters, each written by an expert in the field, survey the key technologies, setting them in context and highlighting their benefits and possible applications. This book is a valuable resource for those working in the communications industry, either at the professional or student level, who do not have extensive background knowledge or the underlying physics of the technology.

  • Modern Image Processing: Warping, Morphing, and Classical Techniques

    • 1 Edición
    • Christopher Watkins
    • Inglés

  • Welding Steels without Hydrogen Cracking

    • 2 Edición
    • Norman Bailey + 5 más
    • Inglés
    A comprehensive guide to avoiding hydrogen cracking which serves as an essential problem-solver for anyone involved in the welding of ferritic steels. The authors provide a lucid and thorough explanation of the theoretical background to the subject but the main emphasis throughout is firmly on practice.

  • Engine Tribology

    • 1 Edición
    • C.M. Taylor
    • Inglés
    Customer expectations and international competition are obliging car and commercial vehicle manufacturers to produce more efficient and cleaner products in shorter product cycle times. The consideration of Engine Tribology has a leading role to play in helping to achieve these goals. Specific areas of interdisciplinary interest include: design influences on fuel economy and emissions; new materials (ceramics, steels, coatings, lubricants, additives); low viscosity lubricants; and low heat rejection (adiabatic) engines.This volume gives a detailed and current review on some basic features of tribology particularly associated with internal combustion engines such as: lubrication analysis relevant to plain bearings, Hertzian contact theory and elastohydrodynamic lubrication associated with cams and followers and friction and wear in a general context. Several chapters examine engine bearings, valve trains, (cams and followers) and piston assemblies. For each machine element a background introduction is followed by design interpretations and a consideration of future developments. The important topic of materials, solids and lubricants is focused upon in the concluding chapters.The work will be of interest to engineers and researchers in the automobile, automotive products, petroleum and associated industries.

  • Engineering Tribology

    • 1 Edición
    • G.W. Stachowiak + 1 más
    • Inglés
    The interdisciplinary nature of tribology encompasses knowledge drawn from disciplines such as mechanical engineering, materials science, chemistry and physics. The interaction between these different fields of knowledge to achieve the final result, the control of friction and wear, is reviewed in this volume. This interdisciplinary approach has proven to be a very successful way of analysing friction and wear problems. In many cases tribology is viewed as an inaccessible subject which does not produce useful answers. In this volume the authors redress this problem by providing a comprehensive treatment of the subject. A basic feature of the book is the emphasis on describing various concepts in an accessible manner for the benefit of non-specialists. This principle is applied from the beginning of the book, where the reader is introduced to the fundamental concept of tribology. This concept is then often used to show how the various topics in tribology are interrelated to form one coherent subject. A direct graphical illustration of the mechanisms controlling tribological phenomena is presented. Carefully prepared diagrams allow rapid appreciation of the basic ideas and facts in tribology. The numerical analysis of hydrodynamic lubrication is supported by a number of computer programs which are included in the book. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is analyzed together with the methods of coatings deposition. The book contains 474 figures and 44 tables. More than 1000 references are provided to give the reader access to more specialized information if required. The volume is intended to provide graduates in engineering or materials science with an understanding of the fundamental concepts of friction, wear and lubrication.

  • Marine Electrical Equipment and Practice

    • 2 Edición
    • H D MCGEORGE
    • Inglés
    Caters for marine engineer candidates for Department of Transport Certification as Marine Engineer Class One and Class Two. It covers the various items of ships' electrical equipment and explains operating principles.David McGeorge is a former lecturer in Marine Engineering at the College of Maritime Studies, Warsash, Southampton. He is the author of General Engineering Knowledge.

  • International Progress in Precision Engineering

    Proceedings of the 7th International Precision Engineering Seminar, Kobe, Japan, May 1993
    • 1 Edición
    • Fumiko Ikawa-Smith
    • Inglés
    International Progress in Precision Engineering documents the proceedings of the 7th International Precision Engineering Seminar held in Kobe, Japan, May 1993. The seminar brought together the world's leading precision engineering practitioners from areas of application as diverse as sensors, actuators, scanning tip microscopy, micro and nano machining (including bio-machining), ultra precision measuring machines, machine tools, and large optics for space technology. The seminar included 10 oral sessions that dealt with the following topics: (I) Metrology - The Science Base For Precision Engineering; (II) Sensors and Actuators in Precision Engineering and Nanotechnology; (III) New Materials - Applications and Ultra-Precision Energy Beam Processing; (IV) Nanotechnology Machining Processes; (V) New Developments In Ultra-Precision Machines; (VI) Ultra-Precision, Servo, and Control Technology; (VII) Precision Engineering in Space Technology; (VIII) X-Ray Technologies and Their Applications; (IX) Micromechanics and Micrometrology; and (X) New Developments n Precision Engineering. There were also poster sessions and an introductory keynote speech by Dr. H. Mizuno, Executive Vice-President of Matsushita/Panasonic... who talks on the symbiotic relationship between electronics and precision engineering.

  • Water Hammer in Pipe-Line Systems

    • 1 Edición
    • Volumen 43
    • J. Záruba
    • Inglés
    The physical principles of water hammer are explained in this volume. The basic mathematical methods of solution of water hammer and ways of limiting its effects are covered. Detailed description is given of the method of characteristics and the corresponding programs for personal computers, which enables solution of water hammer in a wide variety of hydraulic systems encountered in practice. Examples are given of solution of water hammer of common pipe-line systems as well as calculation of the steady state of flow, the determination of discharge through a pipe-line, measurements of characteristics of valves, pumps, turbines, determination of the operating régime of a valve in order to ensure a desired pressure and discharge curve, etc. This book will be of interest to those civil, mechanical and petroleum engineers dealing with the design and operation of hydraulic systems.

  • Intelligent Components and Instruments for Control Applications 1992

    • 1 Edición
    • E. F. Camacho + 1 más
    • Inglés
    Intelligent control is an emergent field involving the development of new control techniques, such as reasoning, learning and perception, and has a great impact on a number of applications including robotics and process control. The symposium brought together control systems specialists, equipment manufacturers, and end-users, to evaluate techniques, components, and instruments for intelligent control. The selected papers in this volume cover intelligent control techniques, actuators, sensors, image processing, computer vision, software and communications. Papers relating to applications, such as robotics, power and process control, manufacturing, aerospace and traffic control are also included.

  • The Foundations of Magnetic Recording

    • 2 Edición
    • John C. Mallinson
    • Inglés
    This expanded and updated new edition provides a comprehensive overview of the science and technology of magnetic recording. In the six years since the publication of the first edition, the magnetic recording and storage industry has burgeoned with the introduction of a host of new ideas and technologies. His book contains a discussion of almost every technologically important aspect of recording.

  • Foundations of Genetic Algorithms 1993 (FOGA 2)

    • 1 Edición
    • Volumen 2
    • FOGA
    • Inglés
    Foundations of Genetic Algorithms, Volume 2 provides insight of theoretical work in genetic algorithms. This book provides a general understanding of a canonical genetic algorithm. Organized into six parts encompassing 19 chapters, this volume begins with an overview of genetic algorithms in the broader adaptive systems context. This text then reviews some results in mathematical genetics that use probability distributions to characterize the effects of recombination on multiple loci in the absence of selection. Other chapters examine the static building block hypothesis (SBBH), which is the underlying assumption used to define deception. This book discusses as well the effect of noise on the quality of convergence of genetic algorithms. The final chapter deals with the primary goal in machine learning and artificial intelligence, which is to dynamically and automatically decompose problems into simpler problems to facilitate their solution. This book is a valuable resource for theorists and genetic algorithm researchers.

  • Lubricants and Special Fluids

    • 1 Edición
    • V. Stepina + 1 más
    • Inglés
    The constitution, properties, production and applications of lubricants and related fluids of all states of aggregation are reviewed in this volume. Special attention is devoted to synthetic lubricants and to additives for lubricants. Standards of quality are listed, together with systems of classification and the most important specifications and methods of testing the properties of lubricants and their performance in service. Future trends in lubricants are also discussed. Non-conventional lubricants and additives are examined in detail. The relationship between constitution and properties of lubricants, e.g., the viscosity -temperature -pressure relationship, the behaviour in ageing, the biodegradability, synergisms and antagonisms in the blends of lubricants, of additives and lubricant-additive are analyzed. Guidelines for the selection of lubricants and fluids in the design, service and maintenance of machines and machine parts are also given. The work will be of interest to all those involved in the research and development of petrochemical and machinery industries, as well as lecturers and students specializing in this field.

  • Encyclopedia of Environmental Control Technology: Volume 5

    Waste Minimization and Recycling
    • 1 Edición
    • Paul Cheremisinoff
    • Inglés
    As landfills are closed and new and stricter legislation enacted, the problems of waste and pollution grow ever larger. Re-engineering production lines to reduce the source of unusable by-products is one answer, and developing new technologies to make use of these materials another. Recycling provides an immediate solution, and it is one that is becoming more and more popular in a variety of industries ranging from styrene to steel to newsprint. Like the other titles in the "Encyclopedia of Environmental Control Technology" series, this volume draws on contributors from around the world who are engaged in finding ways to solve the problems of waste and devising new strategies for recycling.

  • Mathematical Problems in Elasticity and Homogenization

    • 1 Edición
    • Volumen 26
    • O.A. Oleinik + 2 más
    • Inglés
    This monograph is based on research undertaken by the authors during the last ten years. The main part of the work deals with homogenization problems in elasticity as well as some mathematical problems related to composite and perforated elastic materials. This study of processes in strongly non-homogeneous media brings forth a large number of purely mathematical problems which are very important for applications. Although the methods suggested deal with stationary problems, some of them can be extended to non-stationary equations. With the exception of some well-known facts from functional analysis and the theory of partial differential equations, all results in this book are given detailed mathematical proof.It is expected that the results and methods presented in this book will promote further investigation of mathematical models for processes in composite and perforated media, heat-transfer, energy transfer by radiation, processes of diffusion and filtration in porous media, and that they will stimulate research in other problems of mathematical physics and the theory of partial differential equations.

  • Laser Welding

    A Practical Guide
    • 1 Edición
    • C T Dawes
    • Inglés
    Enables the reader both to understand and to use, in a practical manner, laser welding. The author explains the principles of laser welding and provides examples of industrial applications, examines many aspects of laser welding and devotes a complete chapter to safety.

  • Digital Control of Electric Drives

    • 1 Edición
    • Volumen 43
    • R. Koziol + 2 más
    • Inglés
    The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.

  • Data Fusion in Robotics & Machine Intelligence

    • 1 Edición
    • Bozzano G Luisa
    • Inglés
    This book addresses the techniques for modeling and integration of data provided by different sensors within robotics and knowledge sources within machine intelligence. Leaders in robotics and machine intelligence capture state-of-the-art technology in data sensor fusion and give a unified vision of the future of the field, presented from both the theoretical and practical angles.

Temas relacionados