Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Fatigue Strength of Welded Structures

    • 2 Edición
    • S J Maddox
    • Inglés
    The key to avoidance of fatigue, which is the main cause of service failures, is good design. In the case of welded joints, which are particularly susceptible to fatigue, design rules are available. However, their effective use requires a good understanding of fatigue and an appreciation of problems concerned with their practical application. Fatigue strength of welded structures has incorporates up-to-date design rules with high academic standards whilst still achieving a practical approach to the subject. The book presents design recommendations which are based largely on those contained in recent British standards and explains how they are applied in practice. Attention is also focused on the relevant aspects of fatigue in welded joints which are not yet incorporated in codes thus providing a comprehensive aid for engineers concerned with the design or assessment of welded components or structures. Background information is given on the fatigue lives of welded joints which will enable the engineer or student to appreciate why there is such a contrast between welded and unwelded parts, why some welded joints perform better than others and how joints can be selected to optimise fatigue performance.

  • Handbook of VLSI Microlithography

    Principles, Technology and Applications
    • 1 Edición
    • William B. Glendinning + 1 más
    • Inglés
    This handbook gives readers a close look at the entire technology of printing very high resolution and high density integrated circuit (IC) patterns into thin resist process transfer coatings-- including optical lithography, electron beam, ion beam, and x-ray lithography. The book's main theme is the special printing process needed to achieve volume high density IC chip production, especially in the Dynamic Random Access Memory (DRAM) industry. The book leads off with a comparison of various lithography methods, covering the three major patterning parameters of line/space, resolution, line edge and pattern feature dimension control. The book's explanation of resist and resist process equipment technology may well be the first practical description of the relationship between the resist process and equipment parameters. The basics of resist technology are completely covered -- including an entire chapter on resist process defectivity and the potential yield limiting effect on device production. Each alternative lithographic technique and testing method is considered and evaluated: basic metrology including optical, scanning-electron-mi... (SEM) techniques and electrical test devices, along with explanations of actual printing tools and their design, construction and performance. The editor devotes an entire chapter to today's sophisticated, complex electron-beam printers, and to the emerging x-ray printing technology now used in high-density CMOS devices. Energetic ion particle printing is a controllable, steerable technology that does not rely on resist, and occupies a final section of the handbook.

  • The Chemistry of Wood Preservation

    • 1 Edición
    • R Thompson
    • Inglés
    The effective and lasting treatment of wood against insect and fungal attack grows in importance as forestry reserves decline and as cost increases feed through to the building trade and other timber users. At the same time, environmental pressures bear ever more heavily on the types of chemicals and processes employed in the preservation industry. This book records the proceedings of an international meeting arranged to address such issues. The 15 principal chapters are based upon papers by invited experts to a combined audience of preservation practitioners and non-specialists. The chapter sequence follows the logical pattern of the conference, beginning with a review of the biological threats to be contended. There follow historical and state-of-the-art accounts of aqueous, organic solvent and non-liquid treatment processes. Preservatives increasingly must meet international product and environmental standards, which along with the related test, analytical and quality control procedures, are described and referenced. Contributors from the wood preservation industry address a range of needs associated with cost, safety and performance efficacy, not neglecting a search for a better understanding of the finer chemical mechanisms involved. Remaining problems are outlined in strategies for further research and development.

  • Transformers and Motors

    • 1 Edición
    • George Shultz
    • Inglés
    Transformers and Motors is an in-depth technical reference which was originally written for the National Joint Apprenticeship Training Committee to train apprentice and journeymen electricians. This book provides detailed information for equipment installation and covers equipment maintenance and repair. The book also includes troubleshooting and replacement guidelines, and it contains a minimum of theory and math.In this easy-to-understand, practical sourcebook, you'll discover:* Explanations of the fundamental concepts of transformers and motors* Transformer connections and distribution systems* Installation information for transformers and motors* Preventive maintenance, troubleshooting, and repair tips and techniques* Helpful illustrations, glossary, and appendices* End-of-chapter quizzes to test your progress and understanding

  • Low-Angle Radar Land Clutter

    • 1 Edición
    • J. Barrie Billingsley
    • Inglés
    A necessary reference for all radar engineers or analysts including many levels of managers, advisors and decision makers in the U.S. and worldwide radar industry. Directly useful in both military (DOD) and civilian (FAA) applications. The result of 20 years of research at MIT Lincoln Lab, this book is of the most significant tehcnological consequence for the industry. It actually solves the problem of low angle radar land clutter by showing the reader how to design and predict the performance of radars that operate in situations where land clutter prevalent. Radar land clutter constitutes the unwanted radar echoes returned from the earth's surface that compete against and interfere with the desired echoes returned by targets such as aircraft and other moving and stationary targets. The ability to accurately predict the effects of land clutter in surface radar has been an unsolved problem for many years. This book is comprehensive in addressing the topic, containing many interrelated results, each important in its own right. It unifies and integrates all the results so as to create a comprehensive, innovative, and unequaled work. The results of this book directly enable the reader to predict land clutter effects in surface radar. Modern military aircraft deliberately fly low to hide their presence from radars that are also dealing with land clutter. Depending on the terrain, the performance of the radar varies greatly from very good to very poor. This book helps radar engineers provide accurate assessments of ground clutter, thus bringing their ability to detect and operate against low flying aircraft to a much higher and much more consistent level.

  • Professional Diver’s Manual on Wet-Welding

    • 1 Edición
    • D Keats
    • Inglés
    Versatility, speed and low cost make wet-stick welding an attractive method for use in underwater repair and construction. This training manual and reference book contains step-by-step procedures for performing basic manual metal arc welding operations together with information on welding equipment, consumables and safety. Exercises are included.

  • Tig and Plasma Welding

    Process Techniques, Recommended Practices and Applications
    • 1 Edición
    • W Lucas
    • Inglés
    This book provides designers, welding engineers and metallurgists with the essential information for understanding the welding operation and for applying the processes in production. The fundamental electrical, arc and process characteristics are described for various operating modes, including current, micro-TIG, TIG hot wire, narrow gap TIG and keyhole plasma.

  • Encyclopedia of Tribology

    • 1 Edición
    • C. Kajdas + 2 más
    • Inglés
    The multidisciplinary nature of tribology, the conflicting theories and approaches to it found in the literature, plus the fact that definitions of the same phenomenon often differ widely, prompted the authors to compile this work. The aim of this encyclopedia is to provide information on specific tribological terms. The entire field of tribology encompassing lubrication, friction and wear, i.e. the science and technology of interacting surfaces in relative motion, is covered. An extensive description of the chemical and biological aspects of tribology is given, including a wide range of current references and authors. The reader is also referred to relevant literature for most of the terms listed. The information presented has been made as up-to-date as possible, taking into account both the theoretical and practical nature of the subject.The encyclopedia will be an indispensable reference source in the work of engineers, chemists, physicists, metallurgists, materials and surface scientists, biotechnologists, as well as research workers in these fields.

  • ZZAAP!: Training ESD, FRI, and EMI

    • 1 Edición
    • M. Bruce M. Bruce Corp
    • Inglés
    A "zzap"! is the mortal enemy of today's sophisticated electronics designs. A "zzaap!" can cause a circuit to "lock up" or "hang" -delete bits form a data stream or mysteriously insert bits that aren't supposed to be there or, worst of all, cause the sudden failure of critical integrated circuits. M. Bruce Corp takes you inside the often mysterious world of electrostatic discharge (ESD), radio frequency interference (RFI, and electromagnetic interference (EMI) to show how these can cause a bewildering array of transient problems or catastrophic failures.

  • Control and Dynamic Systems Volume 36

    • 1 Edición
    • Richard A Leondes
    • Inglés
    Control and Dynamic Systems: Advances in Theory and Applications, Volume 36 reviews advances in theory and applications of large scale control and dynamic systems. Contributors focus on production control and the determination of optimal production rates, along with active control systems, uncertainty in control system design, and methods for analyzing multistage commodity markets. This volume is organized into eight chapters and begins with an introduction to multiobjective decision-tree analysis and its significance in applied situations, with two substantive examples. It then shifts to important techniques for the determination of robust economic policies, methods used in the analysis of multistage commodity markets, and a computationally effective algorithm for the determination of the optimal production rate. This book also describes many highly effective techniques for near optimal and robust model truncation. Robust adaptive identification and control algorithms for disturbances and unmodeled system dynamics are given consideration. The final chapter provides examples of the applied significance of the techniques presented in this book, including such large scale systems areas as aerospace, defense, chemical, environmental, and infrastructural industries. This book will be of interest to students and researchers in engineering and computer science.

  • Embedded Controller Forth For The 8051 Family

    • 1 Edición
    • William H. Payne
    • Inglés
    The purpose of this book is to present the technology requied to develop hardware and software for embedded controller systems at a fraction of the cost of traditional methods. Included in the book are hardware schematics of 8051 family development systems (single board and bussed 8051 microcontroller). Source code for both the 8086 and 805 family FORTH operating systems is published in the book. Binary images of the opeating systems can be generated from teh source code using the metacompiler also contained in the book. The book can be seen as a "toolbox" includingg all the necessary hardware and software information to be used in constructing 8051-based controller systems.

  • Information Control Problems in Manufacturing Technology 1989

    Selected papers from the 6th IFAC/IFIP/IFORS/IMACS Symposium, Madrid, Spain, 26-29 September 1989
    • 1 Edición
    • Volumen 13
    • E.A. Puente + 1 más
    • Inglés
    The Symposium presented and discussed the latest research on new theories and advanced applications of automatic systems, which are developed for manufacturing technology or are applicable to advanced manufacturing systems. The topics included computer integrated manufacturing, simulation and the increasingly important areas of artificial intelligence and expert systems, and applied them to the broad spectrum of problems that the modern manufacturing engineer is likely to encounter in the design and application of increasingly complex automatic systems.

  • Pulsed Arc Welding

    An Introduction
    • 1 Edición
    • J A Street
    • Inglés
    Various forms of thermal pulsing in TIG and MIG welding, and droplet pulsing in the MIG process, are described in detail. The author also discusses some disadvantages of pulsing in order to stress the importance of choosing an appropriate level of technology to fulfil a given requirement.

  • Singular Perturbations I

    Spaces and Singular Perturbations on Manifolds Without Boundary
    • 1 Edición
    • Volumen 23
    • L.S. Frank
    • Inglés
    Singular perturbations, one of the central topics in asymptotic analysis, also play a special role in describing physical phenomena such as the propagation of waves in media in the presence of small energy dissipations or dispersions, the appearance of boundary or interior layers in fluid and gas dynamics, as well as in elasticity theory, semi-classical asymptotic approximations in quantum mechanics etc. Elliptic and coercive singular perturbations are of special interest for the asymptotic solution of problems which are characterized by boundary layer phenomena, e.g. the theory of thin buckling plates, elastic rods and beams. This first volume deals with linear singular perturbations (on smooth manifolds without boundary) considered as equicontinuous linear mappings between corresponding families of Sobolev-Slobodetski'... type spaces of vectorial order.

  • Distributed Databases in Real-Time Control

    • 1 Edición
    • Volumen 6
    • M.G. Rodd + 1 más
    • Inglés
    The problems surrounding the subject of distributed databases in real-time control were addressed at the workshop. The difficulties included finding new, high-level conceptual models as conventional solutions are rendered useless in distributed databases. The other problems covered include the difficulties faced due to huge transaction fluxes and time constraints. The papers cover these theoretical issues plus an applications section which provides case studies of efficient applied systems which will be important for the development of this essential field.

  • Marine Boilers

    • 3 Edición
    • G T H FLANAGAN
    • Inglés
    This book provides the information on boilers and the associated equipment, as used at sea, required by marine engineers taking the Steam Paper, Class Two, for the Department of Transport's Certificate of Competency for Marine Engineer Officers. Much of the information is given in the form of comprehensive answers to typical examination questions, with supporting diagrams that help the reader to understand and remember important machinery details. In this new edition the book has been updated throughout with new material on welded boilers, various types of water tube boiler, rotary air heater, water level alarm, consolidated type safety valve, hydraulic testing and various aspects of survey, maintenance and operational problems.

  • Which Process?

    A Guide to the Selection of Welding and Related Processes
    • 1 Edición
    • P T Houldcroft
    • Inglés
    The author presents a unique scheme for selecting processes at the drawing board stage where a need for a connection is usually first perceived. Leading the enquirer through a series of diagrams and tables, he reveals the processes which are feasible for a particular joint. The book includes descriptions of 28 joining processes in which the principal method of use, advantages and limitations, application and factors affecting costs are explained. The book is well illustrated and contains much useful advice invaluable to practising engineers and designers having no previous knowledge of joining.

  • Polarized Light in Optics and Spectroscopy

    • 1 Edición
    • David S. Kliger + 1 más
    • Inglés
    This comprehensive introduction to polarized light provides students and researchers with the background and the specialized knowledge needed to fully utilize polarized light. It provides a basic introduction to the interaction of light with matter for those unfamiliar with photochemistry and photophysics. An in-depth discussion of polarizing optics is also given. Different analytical techniques are introduced and compared and introductions to the use of polarized light in various forms of spectroscopy are provided.

  • Left-Handedness: Behavioral Implications and Anomalies

    • 1 Edición
    • Volumen 67
    • S. Coren
    • Inglés
    Left-handedness has been shown to be a possible marker for various psychological and physical abnormalities. This book presents evidence by a number of researchers who evaluate whether there are indeed differences between left- and right-handers which extend into the broader psychological and physiological realms.Several chapters show that left-handedness is found in unexpectedly high proportions in populations that suffer from various immune deficiency diseases, in alcoholics, dyslexics, mental retardates, psychopaths and other clinical groups. The book indicates why left-handedness should be a marker for such conditions. The genetic and environmental pressures on handedness are explored. A model for pathological left-handedness is presented, along with some interesting data which suggests that left-handedness may be associated with reduced life-span. Finally, several chapters discuss the implications of handedness patterns in non-clinical populations.

  • Tribology of Plastic Materials

    Their Characteristics and Applications to Sliding Components
    • 1 Edición
    • Y. Yamaguchi
    • Inglés
    This book presents a thorough overview on workable theories and reliable experimental data on the use of plastic materials for sliding parts.Divided into four parts. Chapters 1 and 2 deal with current theories of friction and wear, and include discussion of various hypotheses based upon experimental studies. Chapter 3 details experiments designed to improve tribological performance via polymer blending and composite production, whilst Chapter 4 explains how the data obtained from these experiemnts can be applied to sliding machine parts. The work will prove useful in the design of plastic materials and components and will also provide a stepping-stone toward future innovations in this field.

  • Mechanics of Coatings

    • 1 Edición
    • D. Dowson + 2 más
    • Inglés
    Mechanics of Coatings was chosen as the topic for the 16th Leeds-Lyon Symposium, as it was decided to be a timely opportunity to bring together experts of many disciplines connected with coatings to find ways of extending the industrial use of these coatings particularly in the field of tribology. The volume contains 51 papers divided into 20 sessions.

  • Lamb's Questions and Answers on Marine Diesel Engines

    • 8 Edición
    • S. Christensen
    • Inglés
    Lamb's Questions and Answers on the Marine Diesel Engine is a comprehensive reference book for Marine Engineers and all seekeing a working knowledge of the marine diesel engine. This fully revised eighth edition has been completely rewritten. New coverage includes super-longstroke and slow-speed engines, and a new generation of medium-speed engines burning lower quality fuels. New purifier systems for fuel treatment, and the testing of fuel and lubrication oils on board ship are also discussed.

  • Statistical Mechanics

    • 1 Edición
    • R. Kubo + 3 más
    • Inglés
    Statistical Mechanics provides a series of concise lectures on the fundamental theories of statistical mechanics, carefully chosen examples and a number of problems with complete solutions. Modern physics has opened the way for a thorough examination of infra-structure of nature and understanding of the properties of matter from an atomistic point of view. Statistical mechanics is an essential bridge between the laws of nature on a microscopic scale and the macroscopic behaviour of matter. A good training in statistical mechanics thus provides a basis for modern physics and is indispensable to any student in physics, chemistry, biophysics and engineering sciences who wishes to work in these rapidly developing scientific and technological fields. The collection of examples and problems is comprehensive. The problems are grouped in order of increasing difficulty.

  • Practical Switching Power Supply Design

    • 1 Edición
    • Martin C. Brown
    • Inglés
    Take the "black magic" out of switching power supplies with Practical Switching Power Supply Design! This is a comprehensive "hands-on" guide to the theory behind, and design of, PWM and resonant switching supplies. You'll find information on switching supply operation and selecting an appropriate topology for your application. There's extensive coverage of buck, boost, flyback, push-pull, half bridge, and full bridge regulator circuits. Special attention is given to semiconductors used in switching supplies. RFI/EMI reduction, grounding, testing, and safety standards are also detailed. Numerous design examples and equations are given and discussed. Even if your primary expertise is in logic or microprocessor engineering, you'll be able to design a power supply that's right for your application with this essential guide and reference!

  • Advances in Applied Mechanics

    • 1 Edición
    • Volumen 27
    • Inglés

  • Design and Analysis of Fatigue Resistant Welded Structures

    • 1 Edición
    • Dieter Radaj
    • Inglés
    An English version of a sucessful German book. Both traditional and modern concepts are described.

  • A Guide to Designing Welds

    • 1 Edición
    • J Hicks
    • Inglés
    A practical 'how to do it' book written with the design and welding interface in mind. It informs designers not only of what they should know about welding but also, and most importantly, sets out the information the designer should give to the welding engineer or fabrication superintendent so that the designer's aims can be achieved, in terms of engineering performance, safety, reliability, cost and appearance.

  • Submerged-Arc Welding

    • 1 Edición
    • P T Houldcroft
    • Inglés
    This title includes: Origins and development: The process, The first twenty years; Development after 1955; Principles: Equipment, Joint preparation and welding procedure; Welding conditions; Special techniques; Weld defects; Process variants: Single electrode welding; Multiple electrode welding; Metal powder additions; Narrow gap submerged-arc welding; Consumables: Types of flux and their development; Wires; Flux/wire combination; Consumables for different steel types; Flux delivery system; Welding procedures: Welding costs; Establishing a procedure; Procedural options; Application and uses of optimisation; Heat input.

  • Boundary Value Problems in Mechanics of Nonhomogeneous Fluids

    • 1 Edición
    • Volumen 22
    • S.N. Antontsev + 2 más
    • Inglés
    The objective of this book is to report the results of investigations made by the authors into certain hydrodynamical models with nonlinear systems of partial differential equations.The investigations involve the results concerning Navier-Stokes equations of viscous heat-conductive gas, incompressible nonhomogeneous fluid and filtration of multi-phase mixture in a porous medium. The correctness of the initial boundary-value problems and the qualitative properties of solutions are also considered. The book is written for those who are interested in the theory of nonlinear partial differential equations and their applications in mechanics.

  • Ion Beams for Materials Analysis

    • 1 Edición
    • J.R Bird + 1 más
    • Inglés
    The use of ion beams for materials analysis involves many different ion-atom interaction processes which previously have largely been considered in separate reviews and texts. A list of books and conference proceedings is given in Table 2. This book is divided into three parts, the first which treats all ion beam techniques and their applications in such diverse fields as materials science, thin film and semiconductor technology, surface science, geology, biology, medicine, environmental science, archaeology and so on.

  • A History of the Photographic Lens

    • 1 Edición
    • Rudolf Kingslake
    • Inglés
    The lens is generally the most expensive and least understood part of any camera. In this book, Rudolf Kingslake traces the historical development of the various types of lenses from Daguerre's invention of photography in 1839 through lenses commonly used today.From an early lens still being manufactured for use in low-cost cameras to designs made possible through such innovations as lens coating, rare-earth glasses, and computer aided lens design and testing, the author details each major advance in design and fabrication. The book explains how and why each new lens type was developed, and why most of them have since been abandoned. This authoritative history of lens technology also includes brief biographies of several outstanding lens designers and manufacturers of the past.

  • Tribological Design of Machine Elements

    • 1 Edición
    • D. Berthe + 3 más
    • Inglés
    On previous occasions each Symposium has focused attention on a current and significant research topic, usually reflecting the interests of the Leeds or Lyon research groups, however this time the main focus was on the vitally important subject of technology transfer, providing the 154 delegates from 21 countries with the rare opportunity to discuss the impact of their studies on machine design.

  • Geophysical Data Analysis

    Discrete Inverse Theory
    • 1 Edición
    • Volumen 45
    • William Menke
    • Inglés
    Please use extracts from reviews of first edition

  • An Introduction to Rheology

    • 1 Edición
    • Volumen 3
    • K. Walters
    • Inglés
    Rheology is, by common consent, a difficult subject and some of the theoretical components are often viewed as being of prohibitive complexity by scientists without a strong mathematical background. There are also the difficulties inherent in any multidisciplinary science like rheology for those with a specific training. Therefore, newcomers to the field are sometimes discouraged, and for them the existing texts on the subject - some of which are outstanding - are of limited assistance because of their depth of detail and highly mathematical nature.This book introduces the subject of rheology in terms understandable to non-experts and describes the application of rheological principles to many industrial products and processes. It provides a simple but authoritative guide which shows clearly how mathematics, physics and chemistry have contributed to the development of rheology. The generic features of all liquid-like materials are summarised, i.e. viscosity, linear viscoelasticity, normal stresses and extensional viscosity. Particular systems are then discussed, i.e. polymeric liquids and suspensions. The final chapter gives an outline of the theoretical advances which have been made. Consistent notation and nomenclature have been used throughout the book, and the key textbooks and publications which will enable the reader to follow up particular topics are listed.

  • Pipeline Design for Water Engineers

    • 3 Edición
    • Volumen 40
    • D.J. Stephenson
    • Inglés
    "... the book is at its best in the design and analysis sections and could stand on these alone as a well-stocked handbook with copious references for further study," commented the Journal of the National Water Council after publication of an earlier edition of Pipeline Design for Water Engineers. This classic monograph has been revised and updated to take account of new developments in the field. Recent research in cavitation and flow control has prompted additional sections to be added. There are also new sections on supports to exposed pipes and secondary stress. Additional references and a new layout make up this edition. Some sections appearing in previous editions, noteably on pipe network systems analysis and optimization have been ommitted as they were considered more appropriate in the author's parallel book ``Pipeflow Analysis'' (Developments in Water Science, 19).

  • Laser Microfabrication

    Thin Film Processes and Lithography
    • 1 Edición
    • Daniel J. Ehrlich + 1 más
    • Inglés
    This book reviews the solid core of fundamental scientific knowledge on laser-stimulated surface chemistry that has accumulated over the past few years. It provides a useful overview for the student and interested non-expert as well as essential reference data (photodissociation cross sections, thermochemical constants, etc.) for the active researcher.

  • Model Based Process Control

    Proceedings of the IFAC Workshop, Atlanta, Georgia, USA, 13-14 June, 1988
    • 1 Edición
    • Volumen 82
    • T.J. McAvoy + 2 más
    • Inglés
    Presented at this workshop were mathematical models upon which process control is based and the practical applications of this method of control within industry; case studies include examples from the paper and pulp industry, materials industry and the chemical industry, among others. From these presentations emerged a need for further research and development into process control. Containing 19 papers these Proceedings will be a valuable reference work for all those involved in the designing of continuous production processes for industry and for the end user involved in the practical application of process control within their manufacturing process.

  • Water Management in Reservoirs

    • 1 Edición
    • Volumen 33
    • L. Votruba + 1 más
    • Inglés
    This book introduces methods for solving the technical and economic problems posed by water reservoirs, so as to ensure they have the best possible economic and social effect. The significance of reservoirs and the development of their function in water management is assessed, and they are classified according to origin and placing. Among the methods for solving the reservoir's function, both graphical and numerical procedures are described, based on the probability theory and mathematical statistics. In the explanation of the supply function of the reservoirs, attention is paid to the processing of hydrological data, the respective probability distribution is assessed, the theory of stochastic processes is explained, and methods of modelling the sequence of mean annual and monthly discharges are mentioned. The demands of consumers and the reliability of water supply are analysed. All types of reservoir discharge control are presented, i.e. multi-year, annual, short-term and compensation. A solution is given for the discharge control in reservoir systems and in special cases of water management, as well as in individual reservoirs. To describe the flood control function of reservoirs, hydrological data are evaluated, the precision of the flood regime characteristics is assessed, the flood routing in a reservoir is resolved, and the question of flood control is discussed. Control of a reservoir is ensured by a special space, as well as by utilizing the supply and overflow components of the reservoir.A separate part is devoted to the water management operations of reservoirs, mentioning the rules for control of the discharge from reservoirs in permanent operation, mainly using central control, and for the study and evaluation of the water management function of reservoirs. The last part of the book describes solutions for new reservoir functions resulting from their incorporation into water management systems and their function in the environment. The basic types of water management systems are described, as well as conditions for their optimal operation. In a similar way, the distribution of investment and operation costs for the various parts of a complex water management project are discussed in detail, as well as the economic impact of the reliability of water supply and flood control. The physical, chemical, biological and social consequences of reservoirs and their significance in creating a cultural landscape are analysed.The book is mainly intended for those who are involved in the development, preparation and operation of water management schemes and students of graduate and post-graduate courses in the field of water management.

  • SEM Microcharacterization of Semiconductors

    • 1 Edición
    • Volumen 12
    • D. B. Holt + 1 más
    • Inglés
    Applications of SEM techniques of microcharacterizatio... have proliferated to cover every type of material and virtually every branch of science and technology. This book emphasizes the fundamental physical principles. The first section deals with the foundation of microcharacterizatio... in electron beam instruments and the second deals with the interpretation of the information obtained in the main operating modes of a scanning electron microscope.

  • Blackboard Architectures and Applications

    • 1 Edición
    • V. Jagannathan
    • Inglés
    Blackboard Architectures and Applications focuses on studies done on blackboard architecture in the industries and academe. Particularly given value is the role this paradigm plays in distributed problem solving, parallelism, and intelligent real-time systems. Composed of 21 chapters, the book contains the literature of authors who have diligently conducted studies on this concern. The book starts by discussing the blackboard model of problem solving, including control and organization, wherein goal relationships and their use in blackboard architecture are noted. Also given attention are BBI basic control loop, an empirical comparison of explicit and implicit control architectures, and the dynamic integration of reasoning methods. The book then proceeds with discussions on the concurrency and parallelism of advanced architectures. Taken into consideration include design alternatives for parallel and distributed blackboard systems; the parallelization of blackboard architectures and the Agora system; and a comparison of the cage system and polygon architecture. Real-time blackboard architecture systems are also explored. This part contains experiments, frameworks, and methods designed to approximate processing in real-time problem solving. The text also points at developments in blackboard systems. Given attention are the architecture of ATOME, performance of GBB, the Erasmus system, and the use of blackboard system for distributed problem solving. The book finally focuses on object-oriented blackboard architecture for model-based diagnostic reasoning; dynamic instructional planning in the BB1 architecture; and consideration of blackboard model for cockpit information management. The book is a vital source of data for those wanting to explore the potential of artificial intelligence.

  • Analysis of Water Resource Systems

    • 1 Edición
    • Volumen 32
    • L. Votruba
    • Inglés
    Water resource systems research provides a basis for rational water management in large basins. The design and operation of water resource systems are both the most complicated and the most important tasks of water management. This book deals with the basic issues involved in the application of systems sciences to water management.A survey of the systems sciences (the general systems theory, cybernetics, systems engineering, operations research and systems analysis) is presented, as well as the methods for water resource systems analysis and for water resource systems analysis and for their evaluation. The mathematical methods used in systems theory have been given detailed treatment. Linear and dynamic programming have been used as models of optimal programming. Since many practical tasks require the simulation models of water resource systems, apart from their principles and a detailed description, the simulation language for computing programming has been included. Other methods of operations research and their application to water resource systems have been analysed and evaluated. Some of these are: models of inventory theory, models of queuing theory, graphs, network analysis, and some special methods like the out-of-kilter algorithm, the chance-constrained model and the chance-constrained model combined with the simluation model. One chapter is devoted to information and information systems in water management. The final part of the book deals with prospects for water resource systems development.The book is intended for engineers and decision-makers involved in projects, operation and research. However, it can be used by students in high schools, technical universities and by graduate students. It will serve as an up-to-date source of information about the principles and methodology of water resource analysis and design.

  • Advances in Applied Mechanics

    • 1 Edición
    • Volumen 26
    • Inglés

  • Pipeline Corrosion and Cathodic Protection

    A Practical Manual for Corrosion Engineers, technicians, and field personnel
    • 3 Edición
    • Marshall Parker + 1 más
    • Inglés
    This update of Marshall Parker’s classic text contains the latest “hands-on” information for taking measurements and making the calculations necessary for cathodic protection of buried pipe lines. Essentially a practical field manual for corrosion technicians and engineers, it is a simple and direct introduction to the fundamentals of a complex subject. The contents cover soil resistivity surveys, potential surveys, line currents, current requirement surveys, rectifier systems for coated lines, ground bed design and installation, galvanic anodes on coated lines, hot spot protection, bond protection, stray current electrolysis, interference, operation and maintenance, and coating inspection and testing. There are also helpful appendixes that explain the fundamentals of underground corrosion, basic principles of cathodic protection, tables of properties of metals, and attenuation equations. While other books on corrosion are sometimes too theoretical for practical work, Pipe Line Corrosion and Cathodic Protection, Third Edition, shows you how to take actual field measurements and apply them to design a well-protected system.

  • Three-Dimensional Elasticity

    • 1 Edición
    • Volumen 20
    • Inglés
    This volume is a thorough introduction to contemporary research in elasticity, and may be used as a working textbook at the graduate level for courses in pure or applied mathematics or in continuum mechanics. It provides a thorough description (with emphasis on the nonlinear aspects) of the two competing mathematical models of three-dimensional elasticity, together with a mathematical analysis of these models. The book is as self-contained as possible.

  • Multicomputer Vision

    • 1 Edición
    • S. Levialdi
    • Inglés
    Multicomputer Vision is a collection of papers and discussions presented at the 8th Workshop on Multicomputers, held in Rome, Italy on June 2-5, 1987. Contributors present multicomputer algorithms for image processing, evaluation and suggestions on multicomputer systems, and new designs in advanced architectures for computer vision. Separating 12 papers into chapters, this book first describes a pyramidal algorithm for image segmentation based on the definition of the “bimean” of a population. It then examines the use of Polymorphic Torus architecture to yield positive results in the computation of Hough Transform through executing mesh and tree algorithms. The succeeding papers present the five-level quad-tree pyramid algorithm based on chips from the MPP machine and the algorithm databases required for scheduling and reconfiguration decisions based on the user’s task definition. Other chapters oriented towards the evaluation of multicomputer systems are also provided. These chapters include discussions on multi-processor architectures based on perceptual tasks, the advantages of fine grain associative string structure for general purpose computer vision system, and the use of identical single processor elements for comparison between processor arrays and pipeline computers. The book also contains papers oriented on the design features of new multiprocessor architectures. These papers discuss the memory limitations of parallel machines and the physical realization of a one-dimensional array of 128 to 1024 identical processors. This book provides an informal frame of reference to researchers who are interested in the design and development of algorithms, and architectures or languages of multiprocessor systems.

  • Control and Dynamic Systems V29

    Advances in Theory and Applications
    • 1 Edición
    • C.T. Leonides
    • Inglés
    Control and Dynamic Systems: Advances in Theory in Applications, Volume 29: Advances in Algorithms and Computational Techniques in Dynamic Systems Control, Part 2 of 3 discusses developments in algorithms and computational techniques for control and dynamic systems. This volume discusses some computational problems which arose in the applications of Kalman filters. It also examines system fault detection techniques; computational techniques in angle-only tracking filtering; development of real-time knowledge of system parameters; and algorithms for decentralized systems with application to stream water quality. This book is an important reference for practitioners in the field who want a comprehensive source of techniques with significant applied implications.

  • CMOS Cookbook

    • 2 Edición
    • DON LANCASTER + 1 más
    • Inglés
    The CMOS Cookbook contains all you need to know to understand and successfully use CMOS (Complementary Metal-Oxide Semiconductor) integrated circuits. Written in a "cookbook" format that requires little math, this practical, user-oriented book covers all the basics for working with digital logic and many of its end appilations.Whether you're a newcomver to logic and electronics or a senior design engineer, you'll find CMOS Cookbook and its examples helpful as a self-learning guide, a reference handbook, a project-idea book, or a text for teaching others digital logic at the high school through university levels.In the pages of this revised edition, you'll discover: *What CMOS is, who makes it, and how the basic transistors, inverters, and logic and transmission gates work*CMOS usage rules, power-suppy examples, and information on breadboards, state testing, tools, and interfacing*Discussi... of the latest CMOS devices and sub-families, including the 74C, 74HC, and 74HCT series that streamline TTL and CMOS interfacing*An in-depth look at multivibrators - including astable, monostable, and bistable - and linear techniques*Clocked-l... designs and the extensive applications of JK and D-type flip-flops*A helpful appendix featuring a TTL-to-CMOS conversion chart

  • Rapidly Quenched Metals 6

    • 1 Edición
    • R.W. Cochrane
    • Inglés
    Rapidly Quenched Metals 6, Volume 1 covers the proceedings of the Sixth International Conference on Rapidly Quenched Metals held at Le Centre Sheraton, Montreal, Canada from August 3 to 7, 1987. The said conference discusses a wide variety of topics in the field of rapidly solidified metals. The book is divided into two parts. Part 1 covers topics that involve the formation and transformation in metallic materials; amorphous metals; the applications of mechanical alloying; and rapid melting and quenching. Part 2 discusses the formation and structure of amorphous alloys, which includes topics such as the metastability of amorphous phases; amorphous alloy powders; and studies about the properties of different amorphous alloys. The text is recommended for those involved in materials science and metallurgy, especially those studying rapidly solidified metals and amorphous alloys.

  • Fluid Film Lubrication - Osborne Reynolds Centenary

    FLUID FILM LUBRICATION - OSBORNE REY
    • 1 Edición
    • D. Berthe + 3 más
    • Inglés
    The thirteenth Leeds-Lyon Tribology Symposium was devoted to the topic of Fluid Film Lubrication in celebration of the centenary of the publication of the classical paper by Professor Osborne Reynolds in which he identified the mechanism of hydrodynamic lubrication.These proceedings contain more than seventy papers, written by authors from all over the world, covering the entire spectrum of fluid film lubrication. Of particular interest is the detailed consideration of a wide range of machine elements - bearings, seals, cams, rolling elements, as well as the in-depth, state-of-the-art, analytical contributions.

  • Advances in Applied Mechanics

    • 1 Edición
    • Volumen 25
    • Inglés

Temas relacionados