Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Science, Technology and Global Problems

    Trends and Perspectives in Development of Science and Technology and Their Impact on the Solution of Contemporary Global Problems
    • 1 Edición
    • J. Gvishiani
    • Inglés
    Science, Technology and Global Problems documents the proceedings of the International Symposium on Trends and Perspectives in Development of Science and Technology and their Impact on the Solution of Contemporary Global Problems held in Tallinn, USSR on January 8-12, 1979. This compilation discusses the character of global problems in the year 2000, prospects of development of leading branches of science and technology, and its capacity to solve global problems. The topics include global problems in the year 2000 and the role of science in their solution; science and technology as factors for future global development; road to scientific-technolog... culture; and responsibility of scientists in the period of crisis. The energy situation in the world (problems and prospects); mathematics and progress in science and technology; role of information and communication in the solution of global problems; and global public health problems and ways of resolving them are also deliberated in this text. This book is a useful source for students and researchers conducting work on the development of science and technology in solving global problems.

  • The Engineer's Clean Air Handbook

    • 1 Edición
    • P. D. Osborn
    • Inglés
    The Engineer's Clean Air Handbook is written for engineers but in a language which should be understandable to anyone who may be directly involved in or concerned about atmospheric contamination. It concentrates on achieving clean air and on the more general aspects of pollution. The book begins with the description and make-up of the atmosphere, the size and nature of the atmospheric content, sources of contamination, and risk assessment from atmospheric contamination. Subsequent sections focus on air filters and filtration systems, instrumentation for monitoring and control of atmospheric contamination, ventilation and the quality of breathing air, and the relationship of atmospheric contamination and health. Environmentalists, engineers, and ecologists will find the book useful.

  • Vibration of Functionally Graded Beams and Plates

    • 1 Edición
    • Snehashish Chakraverty + 1 más
    • Inglés
    Vibration of Functionally Graded Beams and Plates uses numerically efficient computational techniques to analyze vibration problems associated with FG beams and plates. Introductory material on FG materials and structural members, as well as a range of vibration and shear deformation theories are discussed, providing a valuable summary of these broader themes. The latest research and analysis of vibration in FG materials is presented in an application-oriented manner, linking the research to its importance in fields such as aerospace, nuclear power, and automotive engineering. The book also features research on the complicating effects of thermal environments, piezoelectricity, and elastic foundations. The innovative computational procedures and simulation results are shown in full throughout, providing a uniquely valuable resource for users of numerical modeling software. This book is essential reading for any researcher or practitioner interested in FG materials, or the design of technology for the nuclear power, aerospace, and automotive industries.

  • Essentials of Oil and Gas Utilities

    Process Design, Equipment, and Operations
    • 1 Edición
    • Alireza Bahadori
    • Inglés
    Every oil and gas refinery or petrochemical plant requires sufficient utilities support in order to maintain a successful operation. A comprehensive utilities complex must exist to distribute feedstocks, discharge waste streams, and remains an integrated part of the refinery’s infrastructure. Essentials of Oil and Gas Utilities explains these support systems and provides essential information on their essential requirements and process design. This guide includes water treatment plants, condensate recovery plants, high pressure steam boilers, induced draft cooling towers, instrumentation/plan... air compressors, and units for a refinery fuel gas and oil systems. In addition, the book offers recommendations for equipment and flow line protection against temperature fluctuations and the proper preparation and storage of strong and dilute caustic solutions. Essentials of Oil and Gas Utilities is a go-to resource for engineers and refinery personnel who must consider utility system design parameters and associated processes for the successful operations of their plants.

  • Water (R718) Turbo Compressor and Ejector Refrigeration / Heat Pump Technology

    • 1 Edición
    • Milan N. Šarevski + 1 más
    • Inglés
    Water (R718) Turbo Compressor and Ejector Refrigeration/Heat Pump Technology provides the latest information on efficiency improvements, a main topic in recent investigations of thermal energy machines, plants, and systems that include turbo compressors, ejectors, and refrigeration/heat pump systems. This, when coupled with environmental concerns, has led to the application of eco-friendly refrigerants and to a renewed interest in natural refrigerants. Within this context, readers will find valuable information that explores refrigeration and heat pump systems using natural refrigerants, polygeneration systems, the energy efficiency of thermal systems, the utilization of low temperature waste heat, and cleaner production. The book also examines the technical, economic, and environmental reasons of R718 refrigeration/heat pump systems and how they are competitive with traditional systems, serving as a valuable reference for engineers who work in the design and construction of thermal plants and systems, and those who wish to specialize in the use of R718 as a refrigerant in these systems.

  • Die Casting Metallurgy

    Butterworths Monographs in Materials
    • 1 Edición
    • Alan David Kaye + 1 más
    • Inglés
    Die Casting Metallurgy focuses on developments in the metallurgy of die casting. Ore distribution, smelting methods, and energy requirements for the major non-ferrous metals that are die cast are considered. This text has 29 chapters; the first of which provides an overview of early developments in die casting. After explaining how metals and alloys are die cast, the book turns to the production of aluminum and its alloys, aluminum alloy die castings, and melting equipment for aluminum alloys. The chapters that follow explore the metallurgy of zinc and magnesium alloys; brass and ferrous die casting; automatic metal transfer systems; metal melting treatments; and the metallurgy of die casting machines. Developments in lubrication, die casting, and finishing processes are also considered. This book also describes pressure die casting dies, thermal fatigue of die casting dies, heat treatment of die steels, and surface treatment of steels. Some comparative alloy specifications are summarized and an attempt is made to correlate units of hardness, strength, and other properties. This book will be of interest to materials scientists and industrial materials engineers.

  • Occlusion

    • 1 Edición
    • Hamish Thomson
    • Inglés
    Occlusion focuses on rules that influence the achievement of perfect occlusion, particularly noting the design of the occlusal surfaces of dentures. The manuscript first offers information on the muscles, joints, and teeth, neuromuscular function, and positions and movements. Topics include mandibular joints and ligaments, roots and occlusal surfaces of the teeth, and muscles of mastication. The book then ponders on occlusion and articulation and functions of the masticatory system. The publication examines articulators and disturbances and disorders, as well as gnathological articulators, adjustable and plain-hinge articulators, and developmental and functional disturbances. The manuscript also takes a look at analysis and diagnosis and occlusion in fixed restorative procedures. Discussions focus on clinical analysis of occlusal function, articulator analysis, quadrant restorations and the unilateral bridge, and single restoration. The publication is a dependable source of data for dentists and readers interested in occlusion.

  • Interstitial Alloys

    • 1 Edición
    • H. J. Goldschmidt
    • Inglés
    Interstitial Alloys covers the significant progress in the development and understanding of the principles and applications of interstitial alloys. Interstitial alloy refers to the existence of a pure metal lattice, which the metal-metal atom bond remains the dominant one, and the non-metal atoms are sufficiently small to be accommodated within the metal lattice without, or with only a limited degree of, distortion from metal-type symmetry. This book contains 10 chapters and begins with a brief introduction to the basic principles of interstitial alloys. The next two chapters describe the physical properties of these alloys, along with their behavior in solid solutions. The remaining chapters deal with a specific interstitial alloy, its structure, physico-chemical properties, preparation, and application. This work specifically considers carbide, nitride, boride, silicide, oxide, hydride, and mixed interstitial alloys. This book will be of value to chemists and physicists.

  • Control and Analysis in Iron and Steelmaking

    • 1 Edición
    • R. V. Williams
    • Inglés
    Control and Analysis in Iron and Steelmaking discusses the associated instrumentations and processes involved in iron and steel manufacture, with an emphasis on the process technologies of its various stages. The book covers topics such as an introduction to steelmaking and its developments; the blast furnace – its control, operation, and instrumentation; and the process of direct reduction. The book also discusses other topics such as secondary steelmaking; methods and techniques in the analysis of steel; and mechanical and nondestructive testing of the properties of steel. The text is recommended for metallurgists and engineers who would like to know more about the processes in iron and steel manufacture, the principles behind them, and the progress of the field over the years.

  • Brittle Fracture in Steel Structures

    • 1 Edición
    • G.M. Boyd
    • Inglés
    Brittle Fracture in Steel Structures emphasizes the prevention of brittle fracture in structures fabricated from mild and low alloy steel operating at normal ambient temperatures. This book is divided into seven chapters. Chapter 1 provides the historical background and summarizes numerous case histories of brittle fractures. The nature of the phenomenon and factors that influence brittle fracture, including various methods of testing to determine the notch ductilities of different steels are described in Chapters 2 to 4. The fifth chapter elaborates the design considerations affecting the choice of steel for structural applications. Chapter 6 reviews the main methods for assessing the degree of notch ductility needed for different applications, while Chapter 7 deliberates practical procedures, recommended by the Navy Department Advisory Committee on Structural Steels, for assessing the suitability of different steels for particular applications. This publication is beneficial to metallurgists and welders intending to acquire knowledge of mild steel structures fabricated by welding from rolled steel plates and sections.

  • Metallurgical Microscopy

    • 1 Edición
    • Helfrid Modin + 1 más
    • Inglés
    Metallurgical Microscopy provides the general principles, methods, and techniques in metallurgical microscopy. The book initially provides the techniques for specimen preparation for macroscopic and microscopic examination. Subsequent chapters are devoted to the discussion of light-optical microscopy and photography, interferometry and contrast-raising methods, and microhardness measurement. Topics on high-temperature microscopy, a brief review of the electron microprobe and its applications, and the construction, properties and applications of the electron microscope are presented as well. Metallurgists and materials scientists will find the book very informative and useful.

  • Deformation Geometry for Materials Scientists

    International Series on Materials Science and Technology
    • 1 Edición
    • C. N. Reid
    • W. S. Owen
    • Inglés
    Deformation Geometry for Materials Scientists presents the study of macroscopic geometry of deformation, particularly on crystalline solids. The book discusses a wide range of topics on the deformation of crystalline materials. The text discusses concepts on stress and strain on materials and tensile tests. Linear elastic and plastic deformations; and the macroscopic geometry mechanism of slip and deformation twinning are covered as well. Materials scientists, engineers, and students of materials science will find this book a great reference material.

  • Control Applications in Post-Harvest and Processing Technology 1995

    • 1 Edición
    • J. De Baerdemaeker + 1 más
    • Inglés
    The 1st IFAC/CIGR/EURAENG/IS... Workshop on Control Applications in Post-Harvest and Processing Technology (CAPPT '95) provides the opportunity to discuss and evaluate the state of the art and application of control methods in storage and processes of agricultural and horticultural products. This publication, generated from the papers at the workshop, provides a detailed assessment of present and future developments of key technologies within the agricultural and horticultural fields.

  • Motion Control Report

    • 1 Edición
    • Architecture Technology Architecture Technology Corpor
    • Inglés
    Please note this is a short discount publication.In today's manufacturing environment, Motion Control plays a major role in virtually every project.The Motion Control Report provides a comprehensive overview of the technology of Motion Control:* Design Considerations* Technologies* Methods to Control Motion* Examples of Motion Control in Systems* A Detailed Vendors List

  • Power Converters with Digital Filter Feedback Control

    • 1 Edición
    • Keng C. Wu
    • Inglés
    Power Converter with Digital Filter Feedback Control presents a logical sequence that leads to the identification, extraction, formulation, conversion, and implementation for the control function needed in electrical power equipment systems. This book builds a bridge for moving a power converter with conventional analog feedback to one with modern digital filter control and enlists the state space averaging technique to identify the core control function in analytical, close form in s-domain (Laplace). It is a useful reference for all professionals and electrical engineers engaged in electrical power equipment/systems design, integration, and management.

  • A Guide to Internal Loss Prevention

    • 1 Edición
    • Roy L. Wesley + 1 más
    • Inglés
    A Guide to Internal Loss Prevention provides an analysis of loss prevention factors from the inside looking out, rather than the outside looking in, bringing to management's attention specific organizational areas that may be contributing to internal loss. It is the authors' intent to demonstrate that management personnel often do not pay attention to essential details, and that this laxity, carelessness, or deliberate negligence is costing both industry and the consuming public billions of dollars annually in needless added costs. This book is organized by recognizable business functions rather than by type of organization. Key topics discussed include the administrative, financial, management, production area, personnel, and safety considerations of loss prevention. White collar crime, computer security, and information security are also covered. Where possible, case studies are supplied to clearly depict an actual loss situation, so that management sees how it can happen. An attempt is made to identify loss-producing situations, their possible causes, their effects, and finally, recommendations for remedies that may enable management to prevent recurrences, thereby saving money and ultimately profits.

  • Mechanical Measurements

    Jones' Instrument Technology
    • 4 Edición
    • B E Noltingk
    • Inglés
    Jones' Instrument Technology, Volume 1: Mechanical Measurements, Fourth Edition, provides a comprehensive discussion of the design, operation, and application of various instruments for different types of measurements. The material has been grouped by application, but supplemented by one or two ""techniques"" chapters. The text is primarily a ""stand alone"" description of current practice. For the greatest part, readers will learn most from it simply by reading what it says itself. Because this book does not go into the greatest detail, most chapters feature a listing of more specialized books where particular subjects are dealt with more fully. The book covers instrumentation for measurements of flow, viscosity, length, strain, level and volume, vibration, force, density, pressure, vacuum, and particle size. It is aimed at a technician readership, as were earlier editions. Specialist instrument designers can find in this book a sound foundation on which they can build. Would-be graduate engineers who do not specialize in instrumentation will also find the broad coverage they need.

  • Dynamic Deformation, Damage and Fracture in Composite Materials and Structures

    • 1 Edición
    • Vadim Silberschmidt
    • Inglés
    Composite materials, with their higher exposure to dynamic loads, have increasingly been used in aerospace, naval, automotive, sports and other sectors over the last few decades. Dynamic Deformation, Damage and Fracture in Composite Materials and Structures reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, in a broad range of application fields including aerospace, automotive, defense and sports engineering. As the mechanical behavior and performance of composites varies under different dynamic loading regimes and velocities, the book is divided into sections that examine the different loading regimes and velocities. Part one examine low-velocity loading and part two looks at high-velocity loading. Part three then assesses shock and blast (i.e. contactless) events and the final part focuses on impact (contact) events. As sports applications of composites are linked to a specific subset of dynamic loading regimes, these applications are reviewed in the final part.

  • Automation and Instrumentation for Power Plants

    Selected Papers from the IFAC Symposium, Bangalore, India, 15-17 December 1986
    • 1 Edición
    • M. Ramamoorty
    • Inglés
    An analysis of power systems, control hardware, modelling and simulation, instrumentation, and computers and distributed systems. The stability of plants and their interaction in a multi-machine system is also discussed, as well as an analysis of the values of LOFT ATWS EVENT for PWR and the new algorithm of on-line ELD for thermal power plants.

  • Load-Bearing Fibre Composites

    International Series on the Strength and Fracture of Materials and Structures
    • 1 Edición
    • Michael R. Piggott
    • D M R Taplin
    • Inglés
    Load-Bearing Fibre Composites provides a unified view of the entire field of fiber and platelet composites. This book explores the complex interactions between fibers and matrix. Organized into 12 chapters, this book begins with an overview of the fundamental ideas in the field of fiber reinforced composites. This text then provides data on their load-bearing capabilities. Other chapters consider a rough estimate of how strong a material could be and describe the two main sources of weakness in real materials. This book discusses as well the slender forms of material and describes the simple slip theory of reinforcement that gives the modulus and strength for aligned short-fiber composites. The final chapter deals with the versatile use of fiber reinforced materials, which can be designed for a specific application by suitable choice of components and volume fraction. This book is a valuable resource for materials scientists, metallurgists, designers, engineers, and research workers.

  • Politics and Education

    Cases from Eleven Nations
    • 1 Edición
    • R. Murray Thomas
    • Inglés
    Politics and Education: Cases from eleven nations tackles the relationship between politics and education. The book presents several dimensions of the politics-education relationship, such as the use of education in achieving political agendas and the effects of the interest of a political group on educational policy. The book present cases from 11 different countries that show the interaction between education and politics, such as the use of educational policy as a compensatory legitimation in West Germany; the educational opportunity under pre- and post-revolutionary condition in Nicaragua; and the education and the maintenance of the social-class system in Jamaica. The text will be of great interest to readers concerned with the implication of political agendas for the education system of a country.

  • Lightweight Composite Structures in Transport

    Design, Manufacturing, Analysis and Performance
    • 1 Edición
    • James Njuguna
    • Inglés
    Lightweight Composite Structures in Transport: Design, Manufacturing, Analysis and Performance provides a detailed review of lightweight composite materials and structures and discusses their use in the transport industry, specifically surface and air transport. The book covers materials selection, the properties and performance of materials, and structures, design solutions, and manufacturing techniques. A broad range of different material classes is reviewed with emphasis on advanced materials. Chapters in the first two parts of the book consider the lightweight philosophy and current developments in manufacturing techniques for lightweight composite structures in the transport industry, with subsequent chapters in parts three to five discussing structural optimization and analysis, properties, and performance of lightweight composite structures, durability, damage tolerance and structural integrity. Final chapters present case studies on lightweight composite design for transport structures.

  • Power Control Circuits Manual

    • 1 Edición
    • R. M. Marston
    • Inglés
    Power Control Circuits Manual presents a comprehensive review of electronic power control. The book is comprised of eight chapters that deal with a specific aspect of power control. The text first discusses the basic principles of electrical-electroni... power control, and then proceeds to presenting practical control circuits using conventional switches and relays. Chapter 3 discusses ways of using CMOS devices as low-power electronic switches, while Chapters 4 and 5 deal with AC and DC power control systems. Next, the book presents ways of controlling DC motors, and the remaining two chapters deal with audio power control and DC power supply systems, respectively. The book will be of great use to design engineers and technicians. Undergraduate students of electronics-related degree will also find this book interesting.

  • An Introduction to Ceramic Science

    The Commonwealth and International Library: Materials Science and Technology (Ceramics Division)
    • 1 Edición
    • D. W. Budworth
    • G. Arthur
    • Inglés
    An Introduction to Ceramic Science covers the principles of ceramic science, the physicochemical system, and atomic mechanisms of ceramics. This book is organized into eight chapters and begins with a study of atoms and the way in which they bond together to form crystalline solids. This topic is followed by a geometrical description of the structures of some crystals of particular importance in ceramics and some of the features of the elementary classical theory of ionic crystals. The following chapter presents the principles of the thermodynamic and phase diagram approaches to study phase equilibrium in ceramics. A chapter is devoted to the microstructure and porosity of ceramics. The discussion then shifts to several atomic movements in dense ceramics, such as diffusion, nucleation, and grain growth. The concluding chapters examine the mechanical properties and densification processes in ceramics. This book is of great value to ceramists, scientists, researchers, and undergraduate students who are interested in improving ceramic materials for particular applications.

  • Heating Services Design

    • 1 Edición
    • Ronald K. McLaughlin + 2 más
    • Inglés
    Heating Services Design focuses on the design of heating systems. The book first discusses the fundamentals of fluid flow. Topics include fluid properties, viscous fluids in motion, fluid flow in pipes, and additional losses in pipes. The text explains automatic control and considers feedforward and feedback control, process reaction rate, system time lags, control valves, modes of control, and cascade and multi-controller systems. The book also discusses heating system design; estimation of the heating system load and energy consumption; and steady-state heat losses. The text describes heat emission and emitter selection. Heat emission from pipes, plane surfaces, radiators, and convectors; emitter arrangements; and partial load conditions are underscored. The selection also explains water heating systems. Topics include system layouts; design flow rate and apportioning of the mains emission; sizing the pipework; domestic forms of low pressure of hot water heating systems; pressurized heating systems; and group and district heating. The text is a good source of information for readers interested in the design of heating systems.

  • Nonlinear Control Systems Design 1995

    • 1 Edición
    • A.J. Krener + 1 más
    • Inglés
    The series of IFAC Symposia on Nonlinear Control Systems provides the ideal forum for leading researchers and practitioners who work in the field to discuss and evaluate the latest research and developments. This publication contains the papers presented at the 3rd IFAC Symposium in the series which was held in Tahoe City, California, USA.

  • Fundamentals of Engineering Geology

    • 1 Edición
    • F. G. Bell
    • Inglés
    Fundamentals of Engineering Geology discusses geomorphological processes, particularly the linkages between geology, geo-technics, rock mechanics, soil mechanics, and foundation design. The book reviews igneous rocks, metamorphic rocks, sedimentary rocks, and stratigraphy. Stratigraphy is based on three fundamental principles, namely, the "Law of Superposition, the ""Law of Faunal Succession

  • Fiber-Reinforced-Plastic (FRP) Reinforcement for Concrete Structures

    Properties and Applications
    • 1 Edición
    • Volumen 42
    • David A. Hensher
    • L. Anselin
    • Inglés
    The use of fiber reinforced plastic (FRP) composites for prestressed and non-prestressed concrete reinforcement has developed into a technology with serious and substantial claims for the advancement of construction materials and methods. Research and development is now occurring worldwide. The 20 papers in this volume make a further contribution in advancing knowledge and acceptance of FRP composites for concrete reinforcement. The articles are divided into three parts. Part I introduces FRP reinforcement for concrete structures and describes general material properties and manufacturing methods. Part II covers a three-continent perspective of current R&D, design and code implementations, and technical organizations' activities. Part III presents an in-depth description of commercially-availab... products, construction methods, and applications. The work is intended for engineers, researchers, and developers with the objective of presenting them with a world-wide cross-section of initiatives, representative products and significant applications.

  • A Practical Guide to the Selection of High-Temperature Engineering Thermoplastics

    • 1 Edición
    • A.A. Collyer
    • Inglés
    Helps the individual without formal training in plastic materials through the maze of materials selection to his final goal. Those with a basic knowledge of this area will benefit from the more practical aspects of the guide.

  • Basic Materials Studies

    • 1 Edición
    • P N Peapell + 1 más
    • Inglés
    BASIC Materials Studies is a supplement to a variety of materials courses which intends to indicate how simple computer programs, such as Beginners All-purpose Symbolic Instruction Code (BASIC), can be used to illustrate and clarify materials principles. The book starts by providing an introduction to BASIC including the BASIC approach, the elements and different computers and variants of BASIC, checking programs, and graphic and special commands. Chapter 2 tackles the three aspects of the structure of materials: the arrangement of atoms in crystals; the composition and quantity of phases within the structure; and the microscopical assessment of the distribution of phases in a structure. The book continues by discussing the essential theory and programs of thermodynamics and kinetics of solids; mechanical properties of polymers; and deformation and strength of crystalline materials. The last chapter of the book illustrates the materials available; the variety of their properties; and the combinations of characteristics that are available or impossible to achieve with real materials. Students with only a brief introduction to BASIC or engaged on a variety of vocational and non-vocational materials courses will find this book invaluable.

  • Traffic Planning and Engineering

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 2 Edición
    • F. D. Hobbs
    • Inglés
    Traffic Planning and Engineering, Second Edition takes into account underlying trends in traffic planning and engineering. In this edition, Chapter 3 has been remodeled, focusing on the techniques on conducting surveys and their subsequent analysis. Further emphasis has also been provided on environmental management and the central role of computers in all aspects of traffic planning and engineering. The topics discussed in this book include administration and planning in traffic engineering; traffic studies; traffic surveys and analysis; parking; traffic and environmental management; and road user, the vehicle and the road. The traffic stream and capacity; traffic control systems; street lighting, traffic signs, and carriageway markings; and accidents and road safety are also deliberated in this text. This publication is valuable to traffic engineering students, as well as individuals researching on techniques to achieve the safe and efficient movement of people and goods on roadways.

  • International Society for Rock Mechanics

    List of Members 1980
    • 1 Edición
    • Sam Stuart
    • Inglés
    International Society for Rock Mechanics compiles the list of members of the International Society for Rock Mechanics (ISRM) from several nations and dependencies (countries) around the globe. The ISRM is a non-profit organization dedicated to the study and scientific investigation of Rock Mechanics, including related fields such as geology, geophysics, soil mechanics, mining engineering, petroleum engineering, and civil engineering. Each chapter representing a country in this book includes a complete lists of its engineers and geologists that are categorized into three types: National Groups (the group that represents a country); Corresponding Members; Supporting Members; and Ordinary Members. A tally of the total number of members per country is also provided. At the end of this book, the statutes of ISRM, which was approved by the Council of ISRM on September 26, 1978, are discussed and expounded in three different languages — English, French, and German. These statutes are implemented by by-laws approved by the council.

  • Microcomputer Interfacing and Applications

    • 2 Edición
    • M A Mustafa
    • Inglés
    This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

  • Worked Examples in Engineering Field Theory

    Applied Electricity and Electronics Division
    • 1 Edición
    • A. J. Baden Fuller
    • P. Hammond
    • Inglés
    Worked Examples in Engineering Field Theory is a product of a lecture course given by the author to first-year students in the Department of Engineering in the University of Leicester. The book presents a summary of field theory together with a large number of worked examples and solutions to all problems given in the author's other book, Engineering Field Theory. The 14 chapters of this book are organized into two parts. Part I focuses on the concept of flux including electric flux. This part also tackles the application of the theory in gravitation, ideal fluid flow, and magnetism. Part II deals with the concept of potential including electrical potential, as well as the applications of the theory to gravitation, electric conduction, fluid flow through permeable media, conductive heat transfer, ideal fluid flow, and magnetism. This material will be useful to students who have difficulty with the problems presented in the author's other book, or who need further worked examples and more problems to solve.

  • Machine Tool Structures

    • 1 Edición
    • F. Koenigsberger + 1 más
    • Inglés
    Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration conditions. The following chapters explore the stability of the machine structure against chatter; methods of stability analysis; tests and principles of dampers; chatter during grinding operations; and stresses and deformations of closed box structures subjected to bending and shear. Calculation methods for determining stiffness constants of a structure's individual parts, as well as methods for determining the resulting stiffnesses, modal shapes, and their parameters, are also described. The final chapter presents systematic procedures for the analysis of machine tool structures. This book is intended for university students, research workers, and designers.

  • Transport Phenomena in Manufacturing and Materials Processing

    • 1 Edición
    • Volumen 6
    • W.-J. Yang + 2 más
    • A.S. Mujumdar
    • Inglés
    Motivated by international competition and an easy access to high-speed computers the manufacturing and materials processing industry has seen many changes in recent times. New techniques are constantly being devloped based on a broad range of basic sciences including physics, chemistry and particularly thermal-fluids sciences and kinetics. In order to produce and treat massive products, the industry is also in need of a very wide range of engineering knowledge and skill for integrating metallurgy, mechanics, electricity, transport phenomena, instrumentation and computer control.This monograph covers a part of these demands, namely by presenting the available knowledge on transport phenomena in manufacturing and materials processing. It is divided into four parts. Part I deals with the fundamentals of transport phenomena, including the transfer of momentum, energy, mass, electric and magnetic properties. Parts II and III are concerned with applications of the fundamentals in transport phenomena occurring in manufacturing and materials processing, respectively. Emphasis has been placed on common aspects of both discciplines, such as forming, machining, welding, casting, injection molding, surface processes, heating and cooling, solidification, crystal growth and diffusion. Part IV deals with beam technology and microgravity, two topics of current importance.

  • Wire Technology

    Process Engineering and Metallurgy
    • 2 Edición
    • Roger N. Wright
    • Inglés
    Wire Technology: Process Engineering and Metallurgy, Second Edition, covers new developments in high-speed equipment and the drawing of ultra-high strength steels, along with new computer-based design and analysis software and techniques, including Finite Element Analysis. In addition, the author shares his design and risk prediction calculations, as well as several new case studies. New and extended sections cover measurement and instrumentation, die temperature and cooling, multiwire drawing, and high strength steel wire. Coverage of process economics has been greatly enhanced, including an exploration of product yields and cost analysis, as has the coverage of sustainability aspects such as energy use and recycling. As with the first edition, questions and problems are included at the end of each chapter to reinforce key concepts.

  • Pulp and Paper Industry

    Energy Conservation
    • 1 Edición
    • Pratima Bajpai
    • Inglés
    Pulp and Paper Industry: Energy Conservation presents a number of energy-efficient technologies and practices that are cost-effective and available for implementation today. Emerging energy-efficient technologies and future prospects in this field are also dealt with. Qualitative and quantitative results/data on energy savings for various steps of pulp and paper making process are presented. There is no specific book on this topic. This will be a comprehensive reference in the field.

  • Engineering Science 2 Checkbook

    • 1 Edición
    • J O Bird + 1 más
    • Inglés
    Engineering Science 2: Checkbook provides worked and unworked problems concerning a.c./d.c. electrical circuits, electromagnetism, statics, dynamics, energy, and machines. The 14 chapters of the book are organized into three sections. Section A covers electricity, which includes simple d.c. circuits, electromagnetism, and electromagnetic induction. Section B discusses statics and dynamics, such as the effects of forces on materials; forces acting at a point; and linear and angular motion. Section C deals with energy and machine; this section includes work and energy, thermal expansion, and simple machines. The text will be of great use to electrical engineering students who wish to enhance their understanding of the basics of mechanical and electrical science.

  • Semiconductor Nanowires II: Properties and Applications

    • 1 Edición
    • Volumen 94
    • Inglés
    Semiconductor Nanowires: Part B, and Volume 94 in the Semiconductor and Semimetals series, focuses on semiconductor nanowires.

  • Principles of Powder Mechanics

    Essays on the Packing and Flow of Powders and Bulk Solids
    • 1 Edición
    • R. L. Brown + 1 más
    • P. V. Danckwerts
    • Inglés
    International Series of Monographs in Chemical Engineering, Volume 10: Principles of Powder Mechanics: Essays on the Packing and Flow of Powders and Bulk Solids covers topics on packings; elementary statics; measurement of powder properties; flow patterns and segregation; and kinematics.

  • Fundamentals and Applications of Nanophotonics

    • 1 Edición
    • Joseph W. Haus
    • Inglés
    Fundamentals and Applications of Nanophotonics includes a comprehensive discussion of the field of nanophotonics, including key enabling technologies that have the potential to drive economic growth and impact numerous application domains such as ICT, the environment, healthcare, military, transport, manufacturing, and energy. This book gives readers the theoretical underpinnings needed to understand the latest advances in the field. After an introduction to the area, chapters two and three cover the essential topics of electrodynamics, quantum mechanics, and computation as they relate to nanophotonics. Subsequent chapters explore materials for nanophotonics, including nanoparticles, photonic crystals, nanosilicon, nanocarbon, III-V, and II-VI semiconductors. In addition, fabrication and characterization techniques are addressed, along with the importance of plasmonics, and the applications of nanophotonics in devices such as lasers, LEDs, and photodetectors.

  • Advances in Chemical Mechanical Planarization (CMP)

    • 1 Edición
    • Babu Suryadevara
    • Inglés
    Advances in Chemical Mechanical Planarization (CMP) provides the latest information on a mainstream process that is critical for high-volume, high-yield semiconductor manufacturing, and even more so as device dimensions continue to shrink. The technology has grown to encompass the removal and planarization of multiple metal and dielectric materials and layers both at the device and the metallization levels, using different tools and parameters, requiring improvements in the control of topography and defects. This important book offers a systematic review of fundamentals and advances in the area. Part One covers CMP of dielectric and metal films, with chapters focusing on the use of particular techniques and processes, and on CMP of particular various materials, including ultra low-k materials and high-mobility channel materials, and ending with a chapter reviewing the environmental impacts of CMP processes. Part Two addresses consumables and process control for improved CMP, and includes chapters on the preparation and characterization of slurry, diamond disc pad conditioning, the use of FTIR spectroscopy for characterization of surface processes, and approaches for defection characterization, mitigation, and reduction.

  • Fluid-Structure Interactions: Volume 2

    Slender Structures and Axial Flow
    • 2 Edición
    • Michael P. Paidoussis
    • Inglés
    The second of two volumes concentrating on the dynamics of slender bodies within or containing axial flow, Volume 2 covers fluid-structure interactions relating to shells, cylinders and plates containing or immersed in axial flow, as well as slender structures subjected to annular and leakage flows. This volume has been thoroughly updated to reference the latest developments in the field, with a continued emphasis on the understanding of dynamical behaviour and analytical methods needed to provide long-term solutions and validate the latest computational methods and codes, with increased coverage of computational techniques and numerical methods, particularly for the solution of non-linear three-dimensional problems.

  • Advances in Automotive Control 1995

    • 1 Edición
    • L. Guzzella + 1 más
    • Inglés
    Automotive Control is a rapidly developing field for both researchers and industrial practitioners. The field itself is wide ranging and includes engine control, vehicle dynamics, on-board diagnosis and vehicle control issues in intelligent vehicle highway systems.Leading researchers and industrial practitioners were able to discuss and evaluate current developments and future research directions at the first international IFAC workshop on automotive control. This publication contains the papers covering a wide range of topics presented at the workshop.

  • Materials Processing

    A Unified Approach to Processing of Metals, Ceramics and Polymers
    • 1 Edición
    • Lorraine F. Francis
    • Inglés
    Materials Processing is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. The book uses a consistent nomenclature that allow for easier comparisons between various materials and processes. Emphasis is on fundamental principles that gives students a strong foundation for understanding processing and manufacturing methods. Development of connections between processing and structure builds on students’ existing knowledge of structure-property relationships. Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers. This book is intended primarily for upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course.

  • Modern Russian Stress

    The Commonwealth and International Library of Science, Technology, Engineering and Liberal Studies: Pergamon Oxford Russian Series
    • 1 Edición
    • R. I. Avanesov
    • C. V. James
    • Inglés
    Modern Russian Stress is a translation from the Russian dealing with pronunciation of Russian words. This guide to pronunciation, particularly on the correct stress given to the modern spoken Russian word, covers the laws of orthoepy. Orthoepy concerns the principles ensuring the unity of sounds that are recognizable in a particular language. This book analyzes stress in the spoken word in terms of either the sense-group or the breath group. The speaker uses specific intonation and pauses which make the words recognizable. Stress is a word indicator. This guide explains the different ways of stressing a word-syllable, such as the dynamic stress, musical stress, and quantitative stress. This book gives additional attention to the fixed and free stresses. In the Russian language, stress has no fixed position and can occur at any syllable or morphological element of the word, or can shift positions depending on the word use. This book also explains the sound structure and form of certain words. It analyzes stress when found in nouns, verbs, participles, and adjectives, and weak or unstressed words when located in prepositions, conjunctions, pronouns, numerals, linking-verbs, modal verbs and parenthetic verbs. An important part of this guide is the glossary that includes several thousands of Russian words that are usually mis-stressed. This guide can be useful to the student learning elementary Russian, and for migrants and overseas workers who know a little Russian.

  • Multiphysics Modeling: Numerical Methods and Engineering Applications

    Tsinghua University Press Computational Mechanics Series
    • 1 Edición
    • Qun Zhang + 1 más
    • Inglés
    Multiphysics Modeling: Numerical Methods and Engineering Applications: Tsinghua University Press Computational Mechanics Series describes the basic principles and methods for multiphysics modeling, covering related areas of physics such as structure mechanics, fluid dynamics, heat transfer, electromagnetic field, and noise. The book provides the latest information on basic numerical methods, also considering coupled problems spanning fluid-solid interaction, thermal-stress coupling, fluid-solid-thermal coupling, electromagnetic solid thermal fluid coupling, and structure-noise coupling. Users will find a comprehensive book that covers background theory, algorithms, key technologies, and applications for each coupling method.

  • Meeting People via WiFi and Bluetooth

    • 1 Edición
    • Henry Dalziel + 1 más
    • Inglés
    Meeting People via WiFi and Bluetooth will contain an overview of how to track people using Wireless 802.11 Radio Frequencies (Wi-Fi) and Bluetooth 802.15 Radio Frequencies. The content contained here came from research and materials originally presented at Defcon Wireless CTF Village in August 2015 entitled "Meeting People Via Wi-Fi". The book will go over the hardware and software needed in order to do this tracking, how to use these particular tools in order to do attribution, and tips for protecting yourself from being attributed via those signals.

  • Mobile Data Loss

    Threats and Countermeasures
    • 1 Edición
    • Michael T. Raggo
    • Inglés
    The mobile threat landscape is evolving bringing about new forms of data loss. No longer can organizations rely on security policies designed during the PC era. Mobile is different and therefore requires a revised approach to countermeasures to mitigate data loss. Understanding these differences is fundamental to creating a new defense-in-depth strategy designed for mobile. Mobile Data Loss: Threats & Countermeasures reviews the mobile threat landscape using a hacker mind-set to outline risks and attack vectors that include malware, risky apps, operating system compromises, network attacks, and user behaviours. This provides the basis for then outlining countermeasures for defining a holistic mobile security methodology that encompasses proactive protections, response mechanisms, live monitoring, and incident response. Designing a comprehensive mobile security strategy is key. Mobile Data Loss: Threats & Countermeasures outlines the threats and strategies for protecting devices from a plethora of data loss vectors.

Temas relacionados