Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Control of Distributed Parameter Systems 1989

    Selected Papers from the 5th IFAC Symposium, Perpignan, France, 26-29 June 1989
    • 1 Edición
    • M. Amouroux + 1 más
    • Inglés
    This volume presents state-of-the-art reports on the theory, and current and future applications of control of distributed parameter systems. The papers cover the progress not only in traditional methodology and pure research in control theory, but also the rapid growth of its importance for different applications. This title will be of interest to researchers working in the areas of mathematics, automatic control, computer science and engineering.

  • Multivariable Technological Systems

    Proceedings of the Fourth IFAC International Symposium, Fredericton, Canada, 4-8 July 1977
    • 1 Edición
    • D.P. Atherton
    • Inglés
    Recent results in the development and application of analysis and design techniques for the control of multivariable systems are discussed in this volume.

  • Signal Processing of HDTV, V

    Proceedings of the International Workshop on HDTV '93, Ottawa, Canada, October 26-28, 1993
    • 1 Edición
    • L. Stenger + 2 más
    • Inglés
    In a world at the eve of digital television by satellite and cable, this publication provides a state-of-the-art exploration of the latest developments in HDTV technology. It highlights the technologies needed to launch HDTV from demonstration and trial status to that of a complete product and service. It also contributes towards the provision of the knowledge base required for the planning and management of the spectrum across the continents.Papers are sourced from a wide range of international experts in the field, including those from Canada, where, according to L. Chiariglione, ... An incredibly bold gamble, the progressive introduction of HDTV service on the [Canadian] terrestrial distribution network, additional to the existing TV service, has been proven to work and steps have been taken towards the full technical specification of the complete system. This publication aims to have the dream of interactive television take a leap forward into reality.

  • Heterostructures and Quantum Devices

    • 1 Edición
    • Volumen 24
    • Norman G. Einspruch + 1 más
    • Inglés
    Heterostructure and quantum-mechanical devices promise significant improvement in the performance of electronic and optoelectronic integrated circuits (ICs). Though these devices are the subject of a vigorous research effort, the current literature is often either highly technical or narrowly focused. This book presents heterostructure and quantum devices to the nonspecialist, especially electrical engineers working with high-performance semiconductor devices. It focuses on a broad base of technical applications using semiconductor physics theory to develop the next generation of electrical engineering devices. The text covers existing technologies and future possibilities within a common framework of high-performance devices, which will have a more immediate impact on advanced semiconductor physics-particularly quantum effects-and will thus form the basis for longer-term technology development.

  • Channel Coding: Theory, Algorithms, and Applications

    Academic Press Library in Mobile and Wireless Communications
    • 1 Edición
    • David Declercq + 2 más
    • Inglés
    This book gives a review of the principles, methods and techniques of important and emerging research topics and technologies in Channel Coding, including theory, algorithms, and applications. Edited by leading people in the field who, through their reputation, have been able to commission experts to write on a particular topic. With this reference source you will: Quickly grasp a new area of research Understand the underlying principles of a topic and its applications Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved

  • Structural Health Monitoring with Piezoelectric Wafer Active Sensors

    • 2 Edición
    • Victor Giurgiutiu
    • Inglés
    Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Second Edition provides an authoritative theoretical and experimental guide to this fast-paced, interdisciplinary area with exciting applications across a range of industries. The book begins with a detailed yet digestible consolidation of the fundamental theory relating to structural health monitoring (SHM). Coverage of fracture and failure basics, relevant piezoelectric material properties, vibration modes in different structures, and different wave types provide all the background needed to understand SHM and apply it to real-world structural challenges. Moving from theory to experimental practice, the book then provides the most comprehensive coverage available on using piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures. Updates to this edition include circular and straight-crested Lamb waves from first principle, and the interaction between PWAS and Lamb waves in 1-D and 2-D geometries. Effective shear stress is described, and tuning expressions between PWAS and Lamb waves has been extended to cover axisymmetric geometries with a complete Hankel-transform-bas... derivation. New chapters have been added including hands-on SHM case studies of PWAS stress, strain, vibration, and wave sensing applications, along with new sections covering essential aspects of vibration and wave propagation in axisymmetric geometries.

  • Electronic Amplifiers for Automatic Compensators

    International Series of Monographs on Automation and Automatic Control
    • 1 Edición
    • D. Ye. Polonnikov
    • Inglés
    Electronic Amplifiers for Automatic Compensators presents the design and operation of electronic amplifiers for use in automatic control and measuring systems. This book is composed of eight chapters that consider the problems of constructing input and output circuits of amplifiers, suppression of interference and ensuring high sensitivity. This work begins with a survey of the operating principles of electronic amplifiers in automatic compensator systems. The succeeding chapters deal with circuit selection and the calculation and determination of the principal characteristics of amplifiers, as well as the input circuits of alternating and direct current amplifiers. These topics are followed by a discussion of the input circuits of high-sensitivity current amplifiers. The last chapters explore the features and properties of voltage and power amplifiers. This book is intended primarily to specialists in the fields of automation, electronics and instrumentation.

  • Probability and Information Theory, with Applications to Radar

    International Series of Monographs on Electronics and Instrumentation
    • 2 Edición
    • P. M. Woodward
    • D. W. Fry + 1 más
    • Inglés
    Electronics and Instrumentation, Second Edition, Volume 3: Probability and Information Theory with Applications to Radar provides information pertinent to the development on research carried out in electronics and applied physics. This book presents the established mathematical techniques that provide the code in which so much of the mathematical theory of electronics and radar is expressed. Organized into eight chapters, this edition begins with an overview of the geometry of probability distributions in which moments play a significant role. This text then examines the mathematical methods in electronics, which rest to an extraordinary degree upon the methods of time-and-frequency analysis. Other chapters consider the exponential dependence of the number of states on the number of units that immediately suggests a logarithmic measure of capacity. This book discusses as well the threshold of intelligibility that depends on the bandwidth of the transmitted signal. The final chapter deals with the simple applications of direct probabilities to radar theory. This book is a valuable resource for radar engineers.

  • Radio Galaxies

    Radiation Transfer, Dynamics, Stability and Evolution of a Synchrotron Plasmon
    • 1 Edición
    • A. G. Pacholczyk
    • D. ter Haar
    • Inglés
    Radio Galaxies: Radiation Transfer, Dynamics, Stability and Evolution of a Synchrotron Plasmon deals with the physics of a region in space containing magnetic field and thermal and relativistic particles (a plasmon). The synchrotron emission and absorption of this region are discussed, along with the properties of its spectrum; its linear and circular polarization; transfer of radiation through such a region; its dynamics and expansion; and interaction with external medium. Comprised of eight chapters, this volume explores the stability, turbulence, and acceleration of particles in a synchrotron plasmon as well as its application to the physics of radio galaxies. The discussion begins with a description of extragalactic radio sources and their properties, followed by an analysis of the emission and absorption of synchrotron radiation. Subsequent chapters focus on the transfer of polarized radiation in a magnetoactive plasma; hydromagnetics and hydromagnetic stability; confinement and structure of extended radio sources; and radio-tail galaxies. The book also considers compact radio sources before concluding with an evaluation of radio source theories. This monograph is addressed primarily to radio astronomers and graduate students working on the interpretation of observational data.

  • Topics in Engineering Logic

    International Series of Monographs on Electronics and Instrumentation
    • 1 Edición
    • Morton Nadler
    • D.W. Fry + 1 más
    • Inglés
    Topics in Engineering Logic contains the lectures given at the Indian Statistical Institute in Calcutta, India, during the Spring of 1959. The lectures focus on a variety of topics related to engineering logic, including the use of the logical matrix as an auxiliary to the construction of various types of codes. Elementary logical circuits for synchronous systems are also considered, with emphasis on "two-wire" systems based on static flip-flops and having various phase structures. Comprised of seven chapters, this volume begins with an introduction to the logical matrix, a form of representation of logical functions that permits rapid and clear solution of varied problems in logical design. The discussion then turns to elementary logical circuits for synchronous systems and their physical properties, with particular reference to contacts, diodes, and transistors as well as phase structures and diode-gated flip-flops for single-phase and two-phase applications. Subsequent chapters deal with a graphical approach based on the logical matrix as a method for reducing the canonic form to the two-level minimal form; codes and matrices; operational circuits; and the question of increasing reliability through structural redundance. The book concludes with several typical logical design problems, including a drum-indexing circuit and a series-parallel decimal multiplier. This monograph will be of interest to engineers.

  • Basic Matrix Analysis and Synthesis

    With Applications to Electronic Engineering
    • 1 Edición
    • G. Zelinger
    • D. W. Fry + 2 más
    • Inglés
    Electronics and Instrumentation, Volume 36: Basic Matrix Analysis and Synthesis presents the application of matrix methods to practical electronics problems. This book focuses on transistor applications. Organized into three parts, this volume begins with an overview of the fundamental theory of twoports and explains the mechanisms of matrix and determinant operations with applications to the study of twoport networks, both active and passive. This text then explains the concept of impedance transformation and image matching in the different matrix domains. This book presents as well the analysis and synthesis of active networks. The final part deals with the mathematical model concepts of transistors and vacuum tubes that are freely applied to a wide range of problems with an emphasis on practical applications such as conventional amplifiers, single-, and multi-stage transistor feedback amplifiers and oscillators. This book is a valuable resource for electronics engineers as well as for students with some grounding in mathematics and network theory.

  • Quantitative Imaging in Cell Biology

    • 1 Edición
    • Volumen 123
    • Inglés
    This new volume, number 123, of Methods in Cell Biology looks at methods for quantitative imaging in cell biology. It covers both theoretical and practical aspects of using optical fluorescence microscopy and image analysis techniques for quantitative applications. The introductory chapters cover fundamental concepts and techniques important for obtaining accurate and precise quantitative data from imaging systems. These chapters address how choice of microscope, fluorophores, and digital detector impact the quality of quantitative data, and include step-by-step protocols for capturing and analyzing quantitative images. Common quantitative applications, including co-localization, ratiometric imaging, and counting molecules, are covered in detail. Practical chapters cover topics critical to getting the most out of your imaging system, from microscope maintenance to creating standardized samples for measuring resolution. Later chapters cover recent advances in quantitative imaging techniques, including super-resolution and light sheet microscopy. With cutting-edge material, this comprehensive collection is intended to guide researchers for years to come.

  • Lighting Problems in Highway Traffic

    Proceedings of a Symposium Held at the Wenner-Gren Center, Stockholm, Sweden, October 1962
    • 1 Edición
    • Erik Ingelstam
    • Inglés
    Lighting Problems in Highway Traffic provides information pertinent to the problems in highway traffic. This book discusses a very complicated system of problems of greatest significance for road safety during dark hours. Organized into 11 chapters, this book begins with an overview of the information capacity of the human eye that is dependent on physiological, physical, and psychological factors. This text then examines the part played by the vision in the driving of vehicles. Other chapters consider the visual acuity, which varies greatly with the luminance of objects, with their contrasts, and with the presence of uneven luminosity conditions such as one encounters on the highways. This book discusses as well the difference between the illumination concept and the luminance concept in road and street lighting. The final chapter deals with the design of lower headlight beams. This book is a valuable resource for experts in different fields of lighting research.

  • Modern Control Engineering

    Pergamon Unified Engineering Series
    • 1 Edición
    • Maxwell Noton
    • Inglés
    Modern Control Engineering focuses on the methodologies, principles, approaches, and technologies employed in modern control engineering, including dynamic programming, boundary iterations, and linear state equations. The publication fist ponders on state representation of dynamical systems and finite dimensional optimization. Discussions focus on optimal control of dynamical discrete-time systems, parameterization of dynamical control problems, conjugate direction methods, convexity and sufficiency, linear state equations, transition matrix, and stability of discrete-time linear systems. The text then tackles infinite dimensional optimization, including computations with inequality constraints, gradient method in function space, quasilinearization, computation of optimal control-direct and indirect methods, and boundary iterations. The book takes a look at dynamic programming and introductory stochastic estimation and control. Topics include deterministic multivariable observers, stochastic feedback control, stochastic linear-quadratic control problem, general calculation of optimal control by dynamic programming, and results for linear multivariable digital control systems. The publication is a dependable reference material for engineers and researchers wanting to explore modern control engineering.

  • Communicating Pictures

    A Course in Image and Video Coding
    • 1 Edición
    • David Bull
    • Inglés
    Communicating Pictures starts with a unique historical perspective of the role of images in communications and then builds on this to explain the applications and requirements of a modern video coding system. It draws on the author's extensive academic and professional experience of signal processing and video coding to deliver a text that is algorithmically rigorous, yet accessible, relevant to modern standards, and practical. It offers a thorough grounding in visual perception, and demonstrates how modern image and video compression methods can be designed in order to meet the rate-quality performance levels demanded by today's applications, networks and users.With this book you will learn: Practical issues when implementing a codec, such as picture boundary extension and complexity reduction, with particular emphasis on efficient algorithms for transforms, motion estimators and error resilience Conflicts between conventional video compression, based on variable length coding and spatiotemporal prediction, and the requirements for error resilient transmission How to assess the quality of coded images and video content, both through subjective trials and by using perceptually optimised objective metrics Features, operation and performance of the state-of-the-art High Efficiency Video Coding (HEVC) standard

  • Numerical Simulation of Multiphase Reactors with Continuous Liquid Phase

    • 1 Edición
    • Chao Yang + 1 más
    • Inglés
    Numerical simulation of multiphase reactors with continuous liquid phase provides current research and findings in multiphase problems, which will assist researchers and engineers to advance this field. This is an ideal reference book for readers who are interested in design and scale-up of multiphase reactors and crystallizers, and using mathematical model and numerical simulation as tools. Yang and Mao’s book focuses on modeling and numerical applications directly in the chemical, petrochemical, and hydrometallurgical industries, rather than theories of multiphase flow. The content will help you to solve reacting flow problems and/or system design/optimization problems. The fundamentals and principles of flow and mass transfer in multiphase reactors with continuous liquid phase are covered, which will aid the reader’s understanding of multiphase reaction engineering.

  • Wireless Receiver Architectures and Design

    Antennas, RF, Synthesizers, Mixed Signal, and Digital Signal Processing
    • 1 Edición
    • Tony J. Rouphael
    • Inglés
    Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver‘s analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, starting from an analysis of requirements to the choice of architecture and finally to the design and algorithm development. The advantages and disadvantages of each wireless architecture and the suitability to a standard are given, enabling a better choice of design methodology, receiver lineup, analog block, and digital algorithm for a particular architecture. Whether you are a communications engineer working in system architecture and waveform design, an RF engineer working on noise and linearity budget and line-up analysis, a DSP engineer working on algorithm development, or an analog or digital design engineer designing circuits for wireless transceivers, this book is your one-stop reference and guide to designing low-cost low-power multi-mode multi-standard receivers. The material in this book is organized and presented to lead you from applied theory to practical design with plenty of examples and case studies drawn from modern wireless standards.

  • Alternative Energy Sources Part A

    • 1 Edición
    • Jamal Manassah
    • Inglés

  • Rock Testing and Site Characterization

    Comprehensive Rock Engineering:: Principles, Practice and Projects
    • 1 Edición
    • Volumen 3
    • J.A. Hudson
    • Inglés

  • Seals and Sealing Handbook

    • 6 Edición
    • Robert K. Flitney
    • Inglés
    Seals and Sealing Handbook, Sixth Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices.Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failure Guide', the factors to consider should anything go wrong. Building on the practical, stepped approach of its predecessor, Seals and Sealing Handbook, 6th Edition remains an essential reference for any engineer or designer who uses seals in their work.

  • Academic Press Library in Signal Processing

    Image and Video Compression and Multimedia
    • 1 Edición
    • Volumen 5
    • Sergios Theodoridis + 3 más
    • Inglés
    This fifth volume, edited and authored by world leading experts, gives a review of the principles, methods and techniques of important and emerging research topics and technologies in image and video compression and multimedia. With this reference source you will: Quickly grasp a new area of research Understand the underlying principles of a topic and its application Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved

  • The Population Dynamics of the Mucajai Yanomama

    • 1 Edición
    • John Early
    • Inglés
    The Population Dynamics of the Mucajai Yanomama is an analysis of the Mucajai Yanomama, an Indian foraging/horticultur... group located in northern Brazil. The text is an investigation of the population dynamics of the Yanomama Indians, using methods of quantitative demography and qualitative ethnography. The timeline of text focuses from 1958 to 1987, from their first ever contact with representative of the ""outer world"". The book is divided into four major parts and comprised of a total of 10 chapters. Part One introduces the tribe of the Mucajai Yanomama and discusses their population dynamics, as well as provides an overview of postcontact period of 28 years. Part Two focuses on the demographic issues of the tribe. This part looks into variables, such as fertility, mortality, and migration, to understand factors such as cultural antecedents and age-sex structure. Part Three serves as a synthesis of the demographic variables and their relation to each other. The other issue synthesized in this part of the book is the impact of population structure to the cultural practices of the tribe. Lastly, Part Four provides the conclusion of the study and compares the results to other studies of Yanomama groups. The text is a helpful resource mostly to anthropologists and evolutionary demographers, but can also be a reference to anyone who studies population dynamics.

  • Advanced Electric Circuits

    • 1 Edición
    • A. M. P. Brookes
    • P. Hammond
    • Inglés
    Advanced Electric Circuits deals with the concepts of advanced electric circuits and covers topics ranging from the symbolic method of analysis to network theorems, bridge networks, and tuned circuits and filters. Polyphase circuits, non-sinusoidal and transient excitation, and valves and transistors as circuit elements are also discussed, along with elementary transmission-line analysis. Comprised of nine chapters, this book begins with an overview of the j method of solving circuit problems and the various ways in which the vectors can be expressed so that the most suitable form may be chosen for any particular problem. The application of the four basic algebraic processes — addition, subtraction, multiplication, and division — to vectors in the j rotation is also considered. The discussion then turns to bridge networks, tuned circuits and filters, and polyphase circuits. The remaining chapters focus on non-sinusoidal and transient excitation, valves and transistors as circuit elements, and elementary transmission lines. This monograph will be of interest to electricians, electrical engineers, and students of electrical engineering courses.

  • Liberal Studies

    An Outline Course
    • 1 Edición
    • N. C. Dexter + 1 más
    • C. V. James + 2 más
    • Inglés
    Liberal Studies: An Outline Course, Volume One serves as a starting-point for provoking serious and informed discussion of liberal studies. This book basically compiles a series of essays or articles on selected topics of general interest, followed in most cases by a list of quotations taken from various authors. Such topics include education, use of studying Latin or Greek, and pacifism. This publication also pays attention to things of a less specific nature, but things that are interesting and important just the same and things that will be profitable if considered. Other topics include history and progress, law and justice, patriotism and rise of nationalism, science and Christianity, and truth and nature of reality. This volume is recommended for students taking liberal studies and teachers teaching the subject.

  • Performance

    Flight Testing
    • 2 Edición
    • Daniel O. Dommasch
    • Inglés

  • Electrical Correcting Elements in Automatic Control and Regulation Circuits

    • 1 Edición
    • G. K. Krug + 1 más
    • Inglés
    Electrical Correcting Elements in Automatic Control and Regulation Circuits presents the problems of matching some regulator to the device which is to be regulated. This book describes a large number of electrical correcting and stabilizing devices. Organized into two chapters, this book begins with an overview of the theory of automatic regulation. This text then discusses problems which have to do with the introduction of correcting and stabilizing devices into systems of automatic regulation and control. This book provides as well practical recommendations for the application in automatic control systems. The final chapter deals with the components and circuits of correcting devices. This book is a valuable resource for engineers who work in the field of the design and application of automatic regulating and controlling systems.

  • Modern Electronic Test Equipment

    • 2 Edición
    • Keith Brindley
    • Inglés

  • Optoelectronic Line Transmission

    An Introduction to Fibre Optics
    • 1 Edición
    • Raymond L. Tricker
    • Inglés
    Optoelectronic Line Transmission: An Introduction to Fibre Optics provides a basic introduction as well as a background reference manual to fiber optic transmission. Topics covered range from fibers and cables to transmitters and receivers, along with waveguides, couplers, connectors, and repeaters. Optoelectronic test techniques are also described. Comprised of nine chapters, this book begins with a historical background on optoelectronic line transmission as well as a discussion on the advantages and disadvantages of optical fibers and optoelectronic signaling; practical applications of optoelectronics; and future prospects for optoelectronics. Subsequent chapters focus on the theoretical aspects of fiber optics; fibers and cables used in optical transmission; transmitters and receivers; and waveguides, couplers, connectors, and repeaters. Communication systems and the techniques used in optoelectronic testing are also considered. This monograph is intended for practicing electronic and telecommunications engineers, technicians, and students who would like to be aware of the basic fundamentals and capabilities of fiber optics.

  • Silicon-On-Insulator (SOI) Technology

    Manufacture and Applications
    • 1 Edición
    • O. Kononchuk + 1 más
    • Inglés
    Silicon-On-Insulator (SOI) Technology: Manufacture and Applications covers SOI transistors and circuits, manufacture, and reliability. The book also looks at applications such as memory, power devices, and photonics. The book is divided into two parts; part one covers SOI materials and manufacture, while part two covers SOI devices and applications. The book begins with chapters that introduce techniques for manufacturing SOI wafer technology, the electrical properties of advanced SOI materials, and modeling short-channel SOI semiconductor transistors. Both partially depleted and fully depleted SOI technologies are considered. Chapters 6 and 7 concern junctionless and fin-on-oxide field effect transistors. The challenges of variability and electrostatic discharge in CMOS devices are also addressed. Part two covers recent and established technologies. These include SOI transistors for radio frequency applications, SOI CMOS circuits for ultralow-power applications, and improving device performance by using 3D integration of SOI integrated circuits. Finally, chapters 13 and 14 consider SOI technology for photonic integrated circuits and for micro-electromechani... systems and nano-electromechanic... sensors. The extensive coverage provided by Silicon-On-Insulator (SOI) Technology makes the book a central resource for those working in the semiconductor industry, for circuit design engineers, and for academics. It is also important for electrical engineers in the automotive and consumer electronics sectors.

  • Power Systems and Power Plant Control 1989

    Selected Papers from the IFAC Symposium, Seoul, Korea, 22-25 August 1989
    • 1 Edición
    • U. Ahn
    • Inglés
    The control of power systems and power plants is a subject of growing interest which continues to sustain a high level of research, development and application in many diverse yet complementary areas, such as maintaining a high quality but economical service and coping with environmental constraints. The papers included within this volume provide the most up to date developments in this field of research.

  • Structural Concrete

    The Commonwealth and International Library: Structures and Solid Body Mechanics Division
    • 1 Edición
    • J. D. Davies
    • B. G. Neal
    • Inglés
    Structural Concrete examines the behavior of reinforced and prestressed concrete structures under working load and ultimate load conditions. This eight-chapter text deals first with the analysis of concrete structures as a particular branch of structural mechanics. Other chapters explore the empirical methods and the practical design and detailing procedures. Considerable chapters describe the mechanical behavior of structural concrete, with a particular emphasis on the elastic behavior. The final chapters examine the behavior of continuous beams, frames, and slabs. These chapters also look into the models for structural concrete. This book is intended primarily to undergraduate civil engineering students.

  • Damages on Pumps and Systems

    The Handbook for the Operation of Centrifugal Pumps
    • 1 Edición
    • Thomas Merkle
    • Inglés
    Damage on Pumps and Systems. The Handbook for the Operation of Centrifugal Pumps offers a combination of the theoretical basics and practical experience for the operation of circulation pumps in the engineering industry. Centrifugal pumps and systems are extremely vulnerable to damage from a variety of causes, but the resulting breakdown can be prevented by ensuring that these pumps and systems are operated properly. This book provides a total overview of operating centrifugal pumps, including condition monitoring, preventive maintenance, life cycle costs, energy savings and economic aspects. Extra emphasis is given to the potential damage to these pumps and systems, and what can be done to prevent breakdown.

  • Finite Element Analysis and Design of Steel and Steel–Concrete Composite Bridges

    • 1 Edición
    • Ehab Ellobody
    • Inglés
    In recent years, bridge engineers and researchers are increasingly turning to the finite element method for the design of Steel and Steel-Concrete Composite Bridges. However, the complexity of the method has made the transition slow. Based on twenty years of experience, Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges provides structural engineers and researchers with detailed modeling techniques for creating robust design models. The book’s seven chapters begin with an overview of the various forms of modern steel and steel–concrete composite bridges as well as current design codes. This is followed by self-contained chapters concerning: nonlinear material behavior of the bridge components, applied loads and stability of steel and steel–concrete composite bridges, and design of steel and steel–concrete composite bridge components.

  • Micro- and Nanoengineering of the Cell Surface

    • 1 Edición
    • Jeffrey M Karp + 1 más
    • Inglés
    Micro- and Nanoengineering of the Cell Surface explores the direct engineering of cell surfaces, enabling materials scientists and chemists to manipulate or augment cell functions and phenotypes. The book is accessible for readers across industry, academia, and in clinical settings in multiple disciplines, including materials science, engineering, chemistry, biology, and medicine. Written by leaders in the field, it covers numerous cell surface engineering methods along with their current and potential applications in cell therapy, tissue engineering, biosensing, and diagnosis. The interface of chemistry, materials science, and biology presents many opportunities for developing innovative tools to diagnose and treat various diseases. However, cell surface engineering using chemistry and materials science approaches is a new and diverse field. This book provides a full coverage of the subject, introducing the fundamentals of cell membrane biology before exploring the key application areas.

  • Handbook of Fire and Explosion Protection Engineering Principles

    for Oil, Gas, Chemical and Related Facilities
    • 3 Edición
    • Dennis P. Nolan
    • Inglés
    Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author’s life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses.

  • Fluorescence Assay in Biology and Medicine

    • 1 Edición
    • Sidney Udenfriend
    • Bernard Horecker + 2 más
    • Inglés
    Molecular Biology: An International Series of Monographs and Textbooks: Fluorescence Assay in Biology and Medicine, Volume II covers the many applications of fluorescence and phosphorescence. This book discusses the principles of fluorescence polarization, comparison of luminescence methods of analysis, and direct measurement of fluorescence decay times. The photodecomposition, sulfhydryl compounds, determination of primary structure, and fluorescent staining are also deliberated. This text likewise covers the assay of purines in nucleic acid hydrolyzates, formyltetrahydrofola... synthetase, and ovarian hormones. This volume is valuable to chemists, physicists, and biophysicists intending to use fluorescence in studying reaction mechanisms and elucidate the structure of complex biopolymers.

  • III-V Microelectronics

    • 1 Edición
    • J.P. Nougier
    • Inglés
    As is well known, Silicon widely dominates the market of semiconductor devices and circuits, and in particular is well suited for Ultra Large Scale Integration processes. However, a number of III-V compound semiconductor devices and circuits have recently been built, and the contributions in this volume are devoted to those types of materials, which offer a number of interesting properties. Taking into account the great variety of problems encountered and of their mutual correlations when fabricating a circuit or even a device, most of the aspects of III-V microelectronics, from fundamental physics to modelling and technology, from materials to devices and circuits are reviewed. Containing contributions from European researchers of international repute this volume is the definitive reference source for anyone interested in the latest advances and results of current experimental research in III-V microelectronics.

  • Friction Stir Superplasticity for Unitized Structures

    A volume in the Friction Stir Welding and Processing Book Series
    • 1 Edición
    • Zongyi Ma + 1 más
    • Inglés
    This book describes the fundamentals and potential applications of ‘friction stir superplasticity for unitized structures’. Conventional superplastic forming of sheets is limited to the thickness of 3 mm because the fine grained starting material is produced by rolling. Friction stir superplasticity has grown rapidly in the last decade because of the effectiveness of microstructural refinement. The thickness of the material remains almost constant, and that allows for forming of thick sheets/plates, which was not possible before. The field has reached a point where designers have opportunities to expand the extent of unitized structures, which are structures in which the traditional primary part and any supporting structures are fabricated as a single unit. With advanced optimization and material considerations, this class of structures can be lighter weight and more efficient, making them less costly, as well as mechanically less complex, reducing areas of possible failure.

  • A Reference Book of English Words and Phrases for Foreign Science Students

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • R. F. Price
    • Inglés
    A Reference Book of English Words and Phrases for Foreign Science Students is a reference book of English words and phrases for foreign students, to be used as an aid when reading books on science, making notes, or when describing experiments. It is intended to teach the non-technical English words and phrases which are necessary to describe and explain things and events scientifically. Instructions on how to use the book are included. Comprised of eight chapters, this book begins by introducing the reader to qualities of things (shape, composition, texture, color, taste and smell). Subsequent chapters focus on relations (quantitative relations and size, spatial relations and order, temporal relations, whole and part); actions (change, motion, techniques and use of apparatus); facts, concepts, and problems in science; the scientific method; causation and classification; and the particular, the general, and comparisons. This monograph is intended for foreign students who wish to write clear, concise English and to understand more clearly the methods used by scientists in solving problems.

  • Applied Ergonomics Handbook

    Volume 1
    • 1 Edición
    • Sam Stuart
    • Inglés
    Applied Ergonomics Handbook focuses on the applications of applied ergonomics, including workstation analysis, comfort in the industry, and layout of machines and panels. The book first tackles the industrial use of ergonomics, general framework and workstation analysis, and displays. Discussions focus on types of display, approach of ergonomics, workstation analysis, checklist caveat, ergonomics and industry, applying ergonomics, and ergonomics in the firm. The book then elaborates on controls, layout of panels and machines, layout of work spaces, and seating in industry. The manuscript takes a look at thermal comfort in industry, noise in industry, lighting of work places, inspection and human efficiency, and ergonomics versus accidents. Topics include environmental stress, perceptual and physical limitations, lighting and performance, fatigue and efficiency, design of inspection tasks, principles of good lighting, sound and its measurement, annoying effects of noise, effects on the ear and work, body temperature regulation, and coping with extremes of temperature. The publication is a valuable source of data for researchers interested in the applications of ergonomics.

  • A Cost Effective Use of Computer Aided Technologies and Integration Methods in Small and Medium Sized Companies

    • 1 Edición
    • Peter Kopacek
    • Inglés
    The objective of this 1st Workshop was to bring together end-users, manufacturers and (computer) control specialists to evaluate possibilities in the important field of factory automation. This volume offers solutions for product, process design, production design and control. Technical criteria are also discussed and economic justification methods are evaluated. The papers included present intelligent, modular, "low cost" approaches or solutions appropriate for small and medium sized companies which might benefit from improved efficiency and competitiveness.

  • Advances in Control Education 1994

    • 1 Edición
    • A. Ichikawa + 1 más
    • Inglés
    The implementation of effective control systems can help to achieve a wide range of benefits, not least in terms of real cost-savings. Education plays a vital role in ensuring continued success and its importance is well recognized by IFAC with a specifically designated technical committee in this area. This invaluable publication brings together the results of international research and experience in the latest control education techniques, as presented at the most recent symposium. Information on course curricula is presented, as well as teachware, including software and laboratory experimental appparatus.

  • 24 Worked Engineering Drawing Examples

    Volume 1
    • 1 Edición
    • A. J. Jones + 1 más
    • Inglés
    Twenty-Four Worked Engineering Drawing Examples, Volume One presents 24 drawing examples that the author has compiled and given to part-time students of Engineering Drawing. Each drawing embodies a problem to be solved, which is accompanied by a solution. Every solution is carefully presented to assist engineering students in understanding and learning how to solve mathematical and theoretical problems commonly faced by engineers. This compilation will be invaluable to teachers and students of Engineering Drawing and related courses.

  • A Practical Guide to Maintenance Engineering

    • 1 Edición
    • C. L. Dunlop
    • Inglés
    A Practical Guide to Maintenance Engineering presents a critical review of the physical make-up of the equipment. It discusses the equipment register, equipment codes, instrument function terminology, and loop function terminology. It also addresses planned preventive and running maintenance as well as the objectives and guidelines of running maintenance. Some of the topics covered in the book are the preparations of completed planned maintenance service sheet, task sheet, service sheet, and equipment failure sheet; maintenance defect monitoring; maintenance stores spare part monitoring; statutory inspection monitoring; maintenance vibration analysis; and maintenance management. The preparation of safety relief valve schedule is also discussed. An in-depth analysis of the work order input/output flow diagram is provided. The planned and preventive maintenance flow diagram is presented. A chapter is devoted to creation of test running and maintenance record. The book can provide useful information to iron mechanics, engineers, students, and researchers.

  • New Trends in Design of Control Systems 1994

    • 1 Edición
    • J. Mikles + 1 más
    • Inglés
    Computer control systems are developing rapidly, therefore an insight of the latest trends in the design of control systems will increase the success of future developments. This publication brings together the latest key papers on research and development trends in this field, allowing both academics and industrial practioners to find new insights and gain from each other's experience.

  • Bilingual Guide to Business and Professional Correspondence: German-English

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • Joseph Harvard
    • Inglés
    Bilingual Guide to Business and Professional Correspondence: German-English presents a selection of sentences and phrases that are essential for writing business letters. The book is comprised of nine chapters; each chapter addresses a specific aspect of business communications. The text first presents the lay-out of a German business letters, and then proceeds to tackling the contents of a business letter. The subsequent chapters deal with various concerns in business communications, such monetary concerns, legal matters, business transactions, applications, and business relations. The book will be of great use to individuals who work at corporate settings.

  • Intelligent Components and Instruments for Control Applications 1994

    • 1 Edición
    • Cs. Banyasz
    • Inglés
    Advances in computer technology and sensor development have led to increasingly successful control operations. In order to maximize future potential it is vital for academics and practitioners in the field to have an international forum for discussion and evaluation of the latest developments. The IFAC Symposia on intelligent components and instruments provide this opportunity and the latest in the series gives rise to this invaluable publication which provides an authoritative assessment of the present state and future directions of these key technologies.

  • Automatic Control in Aerospace 1994 (Aerospace Control '94)

    • 1 Edición
    • D. Schaechter + 1 más
    • Inglés
    An important, successful area for control systems development is that of state-of-the-art aeronautical and space related technologies. Leading researchers and practitioners within this field have been given the opportunity to exchange ideas and discuss results at the IFAC symposia on automatic control in aerospace. The key research papers presented at the latest in the series have been put together in this publication to provide a detailed assessment of present and future developments of these control system technologies.

  • Safety of Computer Control Systems 1992 (SAFECOMP' 92)

    Computer Systems in Safety-Critical Applications
    • 1 Edición
    • H.H. Frey
    • Inglés
    SAFECOMP '92 advances the state-of-the-art, reviews experiences of the past years, considers the guidance now available and identifies the skills, methods, tools and techniques required for the safety of computer control systems.

  • Applications of Nonlinear Programming to Optimization and Control

    Proceedings of the 4th IFAC Workshop, San Francisco, USA, 20-21 June 1983
    • 1 Edición
    • H. E. Rauch
    • Inglés
    Applications of Nonlinear Programming to Optimization and Control is a collection of papers presented at the Fourth International Federation of Automatic Control Workshop by the same title, held in San Francisco, California on June 20-21, 1983. This workshop aims to exchange information on the applications of optimization and nonlinear programming techniques to real-life control problems, to investigate ideas that arise from these exchanges, and to look for advances in nonlinear programming that are useful in solving control problems. This book is divided into 16 chapters. It covers a wide range of related topics, starting with computer-aided-desig... of practical control systems, continuing through advanced work on quasi-Newton methods and gradient restoration algorithms. Other chapters provide specific examples, which apply these methods to representative problems. The remaining chapters present examples, including trajectory optimization, optimal design of a structure for a satellite, identification of hovercraft characteristics, determination of optimal electricity generation, and optimal automatic transmission for road vehicles. This book is of value to computer scientists and mathematicians.

Temas relacionados