Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Chemistry and Metallurgy

    Second Revised and Enlarged Edition
    • 1 Edición
    • A. Sherry + 2 más
    • Inglés
    Modern Power Station Practice, Volume 5: Chemistry and Metallurgy focuses on power station chemistry and metallurgy. The book first offers information on power station chemistry, including the use, preparation, sampling, storage, and transport of coal to power stations. Other considerations include the commercial use of ash, analysis and testing of coal and coke, gas-side cleaning of boilers, oil firing, burner fuels, testing of fuel oils and gases, and air pollution. The text also reviews water treatment relative to the operation of boilers. The corrosion of metals; sampling and analysis of feed water, boiler water, and steam; instrumentation for quality control; and on-load corrosion of boilers are discussed. The book also looks at cooling water systems in water treatment plants. Topics include water softening, evaporators, sources and quality of raw water, demineralization, and boiler feed water composition. The text also gives emphasis to plant cleaning and inspection and metallurgy and welding. The book is a valuable reference for readers interested in power station chemistry and metallurgy.

  • Microstructures of Irradiated Materials

    Treatise on Materials Science and Technology, Vol. 7
    • 1 Edición
    • H. S. Rosenbaum
    • Inglés
    Treatise on Materials Science and Technology, Volume 7: Microstructures of Irradiated Materials covers the effects of irradiation on the microstructures of solids. The book introduces basic concepts and terminology and discusses the physical effects of irradiation, those having to do with the physical displacement of atoms and the subsequent atom rearrangements that can occur either by momentum transfer or by diffusional phenomena. The text also describes the chemical effects of irradiation, including diffusion, phase changes, precipitation of solute atoms, transmutations, and combinations of these. Some of the complex situations encountered in some nuclear fuels and structural materials of practical concern are also encompassed. Metallurgists, metallurgical engineers, ceramists, materials scientists, and people interested in the nuclear field will find the book invaluable.

  • Stability in the Dynamics of Metal Cutting

    • 1 Edición
    • Volumen 22
    • S.T. Chiriacescu
    • Inglés
    Numerous models have been proposed for the study of the dynamic behaviour of cutting tools. An analysis of the main works published over the past 20 years reveal a lack of general methodology in the mathematical modelling of the dynamic cutting process (CP) and in the elastic structure (ES), as well as the absence of efficient and general methods for identifying the conditions under which the amplitudes of the vibration chatter between tool and workpiece can become problematic.This book provides a thorough review on the mathematical modelling and stability analysis of the dynamic machining system, presenting solutions for the practical problems that can be encountered. The practical points of the stability and instability of the DMS are discussed, together with various aspects of the modelling and identification of the CP and ES systems. The latest findings are examined in the context of a general study using matrix equations. Such a study on the matrix method is timely in view of the rapid spread in the use of mini and micro-computers.Base... on the matrix equations of the CP and ES systems, the general equations of the DMS with time-invariant parameters are established, and various procedures for the actual stability analysis of this system are presented. Many examples are accompanied by illustrations which also provide adequate practical instructions for other problems in the stability analysis of the DMS. The last part of the book deals with the modelling and stability analysis of the DMS with time-varying parameters, random parameters and random input. The work is addressed primarily to those interested in the design and exploitation of machine tools in both industry and research. It will also be of interest to applied mathematicians, and can be used as a reference book for advanced courses in mechanical engineering.

  • The Nature of Materials

    Materials Technology
    • 1 Edición
    • J. G. Tweeddale
    • Inglés
    Materials Technology, Volume 1: The Nature of Materials aims to fill the lack of textbooks about the nature of materials. The text contains various lessons regarding materials science and technology. The book begins by discussing the scope of materials technology, which includes biology, chemistry, economics, and psychology. The text then shifts to the properties of materials and discusses several information about atoms in a single material. A discussion on the pre-production and post-production of materials is presented in the entire chapter. The following chapter is about atoms, electrons, and protons. In the third chapter, the lesson shifts to bonds and materials. The last three chapters feature more information about a material, including its structures, chemical reactions, authenticity, and magnetic properties. The book targets those who are taking up an engineering technician course and gives readers a wider knowledge on the technology and nature of materials.

  • Advanced Materials Source Book

    • 1 Edición
    • Jon Binner + 2 más
    • Inglés
    Advanced Materials Source Book 1994-1995 presents the developments in the field of advanced materials. This book provides information regarding materials and products, legislation, patents, advances in processing and equipment, standards, and testing procedures. Organized into four chapters, this book begins with an overview of the international market trends, specific materials, or materials groups and appliances. This text then examines the applications and makes market projections on a wide range of specialty materials, including ceramics, biomaterials, electronic materials, and optical materials. Other chapters consider the healthy nature of predictions concerning Japan and parts of Europe, stating that Germany and Japan will lead the advanced structural ceramics market. This book discusses as well the developments concerning various materials. The final chapter presents a list of contact details for the organizations listed in the main text to allow the readers to make new contacts or to follow-up items of particular interest. This book is a valuable resource for private consumers.

  • Experimental Methods

    Treatise on Materials Science and Technology, Vol. 19
    • 1 Edición
    • Herbert Herman
    • Inglés
    Treatise on Materials Science and Technology, Volume 19: Experimental Methods, Part B discusses the applications of photostimulated exoelectron emission; the use of photoacoustics in materials science; and microdynamic testing of materials. The text also describes the experimental methods in the mechanochemistry of inorganic solids; as well as the principles and technique of high-resolution transmission electron microscopy. Physicists, materials scientists, and materials engineers will find the book useful.

  • Conservation of Library and Archive Materials and the Graphic Arts

    • 1 Edición
    • Guy Petherbridge
    • Inglés
    Conservation of Library and Archive Materials and the Graphic Arts is the proceeding of the Cambridge 1980 International Conference on the Conservation of Library and Archive Materials and the Graphic Arts. This symposium explores the advancements in the field of conservation of historic and artistic works. The book covers related topics such as the employment of different methods for the preservation of paper such as bleaching and alkaline buffering; the repair, relaxation, binding, handling, and display of articles made of vellum and parchment; and the conservation of books and binders. The text is recommended for archivists, librarians, and museum curators who are interested in the scientific advances in the field of conservation and how it can help them in their profession.

  • Treatise on Materials Science and Technology

    Volume 4
    • 1 Edición
    • Herbert Herman
    • Inglés
    Treatise on Materials Science and Technology, Volume 4 covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book covers articles on advanced techniques by which thin films may be characterized; on diffusion in substitutional alloys; and on solid solution strengthening in face-centered cubic alloys. The text also includes articles on the thermodynamics of binary ordered intermetallic phases; and the major aspects of metal powder processing. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Block Copolymers

    Overview and Critical Survey
    • 1 Edición
    • Allen Noshay + 1 más
    • Inglés
    Block Copolymers: Overview and Critical Survey is a critical review of block copolymer technology and a comprehensive critical survey on the synthesis, characterization, properties, and applications of the specific block copolymer structures reported in the literature. The copolymers are organized according to segmental architecture and chemical composition. Comprised of seven chapters, this book begins with an overview of what block copolymers are, how they are made, and what they can and cannot be expected to do. The next chapter defines block copolymers and compares them with other types of polymer "hybrids," that is, polymer blends, random copolymers, and graft copolymers. The various segmental architectures that are possible with block copolymers are then described, followed by a discussion on the various synthesis techniques applicable to block copolymers; the characterization methods capable of elucidating block copolymer structures; some applications of commercially available block copolymers; and some future challenges for block copolymer technology. The last three chapters are devoted to A-B diblock copolymers, A-B-A triblock copolymers, and (A-B)n multiblock copolymers. This monograph should be useful to readers who want to become generally conversant with block copolymer technology and to those who need to delve more deeply into the subject.

  • Advances in Micromechanics of Granular Materials

    Proceedings of the Second US/Japan Seminar on Micromechanics of Granular Materials, Potsdam, NY, USA, August 5-9, 1991
    • 1 Edición
    • Volumen 31
    • H.H. Shen + 4 más
    • Inglés
    The 45 papers presented in this volume all share the common goal of constructing continuum models based on the micro behaviours of granular materials. Computer simulations continue to provide observations to aid modelling, while new experimental works begin to show promise for increased understanding in this area. Theoretical studies have extended into transitions between the rapid and quasi-static regimes and the fluid and solid mixture flows. Exciting new topics discussed in this volume include: concepts of a measure for randomness in quasi-static granular materials, which is analogous to the granular temperature in a rapid flow; scaling effects in granular media and their implications in both physical and computer simulations; instability; and boundary effects on heterogeneous behavior in simple flow configurations, which are posing new challenges for mathematical modelling. The volume will prove indispensable reading for researchers interested in the current developments in the fundamental aspects of mechanics of granular materials.

  • Glass III

    Treatise on Materials Science and Technology, Vol. 22
    • 1 Edición
    • Minoru Tomozawa + 1 más
    • Inglés
    Treatise on Materials Science and Technology, Volume 22: Glass III is the third of a series of review articles on glass science and technology. The book discusses the theories of structure and bonding and experimental methods for analyzing silicate glass surfaces; the gel methods for making glasses; and the water in glass method. The text also describes the fracture and fatigue of glass; as well as the stresses in glass-to-metal seals. Materials scientists, materials engineers, and students taking materials science and technology courses will find the book invaluable.

  • Materials Science–Selection of Materials

    • 1 Edición
    • S. W. Jones
    • Inglés
    Materials Science—Selection of Materials demonstrates how available physical data and knowledge of production methods can be combined at a sufficiently early stage in the design process so as to make a significant contribution toward optimum selection of materials. Topics covered in this book include material properties and material structure to selection criteria; casting technology and powder metallurgy; the economics of forming by machining processes; and factors affecting manufacturing accuracy. This monograph is comprised of 12 chapters and begins by explaining the application of a systematic working plan for materials selection, with emphasis on the use of test data and decision taking. The chapters that follow deal with the basic strength and property problem for metals and how forming methods, with the help of subsequent treatments, can be chosen to satisfy a particular specification. A review of non-metals such as plastics precedes the final chapters that are specifically orientated to bearing materials and lubricants. In order to provide a satisfactory coverage for these transmission components, the influence of design fundamentals on material and process selection is discussed along with alternative design methods. This text will be a valuable resource for students and practitioners in the fields of materials science, physics, chemistry, engineering, and metallurgy.

  • Metal Transfer and Build-up in Friction and Cutting

    • 1 Edición
    • V. D. Kuznetsov
    • E. H. Freitag
    • Inglés
    Metal Transfer and Build-up in Friction and Cutting aims to systematize our knowledge of the metal build-up, to describe some of the investigations past and present carried out in SFTI (Tomsk), and to make an effort to explain a number of the phenomena in cutting, scratching, and sliding from the point of view of metal transfer theory. The book opens with a chapter on the temperature of the rubbing interface of two solids. This temperature is needed in order to elucidate the nature of the formation of a build-up in scratching, cutting, and sliding. Separate chapters follow on the seizure phenomena, the role played by a built-up edge in scratching, the built-up edge in metal cutting, metal transfer in friction; the occurrence and nature of the build-up at various speeds, temperatures, and pressures; and the problem of friction between cast iron and steel.

  • Critical Survey of Stability Constants of EDTA Complexes

    Critical Evaluation of Equilibrium Constants in Solution: Stability Constants of Metal Complexes
    • 1 Edición
    • G. Anderegg
    • Inglés
    Critical Survey of Stability Constants of EDTA Complexes focuses on the computations, values, and characteristics of stability constants. The book emphasizes that for a critical discussion of experimentally determined stability constants, it is important to consider the precision of the values that manifests the self-consistency of the constant, taking into consideration the random errors. The publication reviews the stability constants of metal complexes. The numerical calculations affirm the reactions and transformations of metal ions when exposed to varying conditions. The text also presents a list of enthalpies of reactions with (ethylenedinitrito)t... acid (EDTA) obtained by direct calorimetric measurements. The book also notes that in order to identify reliable metal complex stability constants for a ligand, it is important to know the formation constants of protonated species. The text is a dependable reference for readers wanting to dig deeper into the stability constants of EDTA complexes.

  • Materials Engineering

    Proceedings of the First International Symposium, University of the Witwatersrand, Johannesburg, South Africa, November 1985
    • 1 Edición
    • J. V. Bee + 2 más
    • Inglés
    Materials Engineering presents the proceedings of the First International Symposium held at the University of the Witwatersrand, Johannesburg, South Africa in November 1985. The book aims to survey the historical development, the state-of-the-art and potential future directions of a broad range of engineering materials and processes. The text describes the materials for the 1980s and 1990s; the structure-property relationships in metals, polymers and composites; and the developments in engineering ceramics. Engineering ceramics; semiconductors; and the surface engineering of metals are also considered. The book further tackles papers on alloy development through microstructural design; welding processes; facets on fatigue; and corrosion-resistant materials. The text also encompasses nuclear techniques; the use analytical electron microscopy in materials science and engineering; materials science and engineering in South Africa; and hot working. The book will be useful to scientists, engineers and technologists involved in all aspects of research, design and applications of a broad range of engineering materials.

  • Empirical Metallogeny

    Depositional Environments, Lithologic Associations and Metallic Ores
    • 1 Edición
    • Peter Laznicka
    • Inglés
    Empirical Metallogeny: Depositional Environments, Lithologic Associations, and Metallic Ores, Vol. 1: Phanerozoic Environments, Associations, and Deposits focuses on the composition, characteristics, properties, and reactions of Phanerozoic metallic ore deposits. The book first offers information on depositional environments and lithologic associations and the world ocean, including ores and host associations, sea water as a metal source, and metals in marine organisms. The text then elaborates on continental margins, orogenic belts, and ophiolite association. Discussions focus on metal geochemistry and metallogeny, tectonic setting and distribution of ophiolites, trace metals and ore evolution, and supracrustal lithologic associations of orogenic belts. The publication tackles zoned mafic/ultramafic complexes in Phanerozoic orogenic belts; unimodal mafic volcanic-sedimentary association; and unimodal felsic volcanic-sedimentary association. Topics include post-depositional modification of massive sulfides, and interaction mineralization and massive tholeiitic basalt flows and arc affiliation. The book is a dependable source of information for readers wanting to study metallic ores.

  • Particle Size Enlargement

    • 1 Edición
    • C. E. Capes
    • J. C. Williams + 1 más
    • Inglés
    Handbook of Powder Technology, Volume 1: Particle Size Enlargement is the first of a series which will together form a Handbook of Powder Technology, primarily intended for engineers and scientists working in industry. The scope of the Handbook can be defined as being concerned with that part of chemical engineering which deals with processes involving the handling and treatment of material in solid particulate form. This book deals with methods used to create larger entities from fine particles so that the bulk properties of particulates can be improved. These so-called ""size enlargement"" methods evidently concern a broad spectrum of technical disciplines and industries ranging from the relatively small scale requirements of pharmaceutical manufacturers through the tonnage requirements of the fertilizer and minerals processing industries. A primary objective in preparing this book was to present a generalized account of the many size enlargement techniques scattered throughout these diverse industries, with emphasis on similarities and unifying characteristics whenever possible. The book devotes one chapter to each of the principal methods used to bring particles together into agglomerates: agitation methods— tumbling agglomeration, agitation methods—mixer agglomeration, pressure methods, thermal methods, spray and dispersion methods, and agglomeration from liquids.

  • Advanced Materials in Japan

    Source Book 1992
    • 1 Edición
    • COMLINE International COMLINE International Corp.
    • Inglés
    Please note this is a Short Discount publication.Advanced Materials in Japan: Source Book 1992 offers the reader news of all the developments which have taken place over the last year. The Source Book is divided into chapters based on the divisions of news in New Materials in Japan – Metals & Alloys; Ceramics; Composites; Electronic & Optoelectronic Materials; Magnetic Materials; Plastics; Materials & The Environment; Medical Materials and Textiles, each introduced by an expert in these particular areas and discussing the implications of the information to non–Japanese industry.In addition, the Source Book includes a chapter devoted to business/market information – company mergers acquisitions etc., together with an overview of the Japanese approach to advanced materials and highlighting all major research initiatives, research programmes etc.

  • Fundamentals of Metallurgical Processes

    International Series on Materials Science and Technology
    • 2 Edición
    • Lucien Coudurier + 2 más
    • D. W. Hopkins
    • Inglés
    Fundamentals of Metallurgical Processes, Second Edition reviews developments in the design, control, and efficiency of metallurgical processes. Topics covered include thermodynamic functions and solutions as well as experimental and bibliographical methods, heterogeneous reactions, metal extraction, and iron and steelmaking. This book is comprised of eight chapters and begins with an overview of the fundamentals of thermodynamics (functions, relationships, and behavior of solutions), followed by a discussion on methods of obtaining thermodynamic data from tables and graphs and by experiment. The kinetics of heterogeneous reactions in metallurgy are examined next, with particular reference to heterogeneous catalysis and mass transfer between immiscible liquid phases. The following chapters focus on the extraction of metals from oxides, sulfides, and halides; the production of iron and steel; the structure and properties of slags; slag/metal reactions; and equilibria in iron and steel production. The final chapter consists entirely of solved problems. This monograph will be of interest to metallurgists and materials scientists.

  • Modern Materials

    Advances in Development and Applications
    • 1 Edición
    • Henry H. Hausner
    • Inglés
    Modern Materials: Advances in Development and Applications, Volume 2 is an eight-chapter text that provides comprehensive insight into the properties, applications, progress, and potentialities of various materials. Chapter 1 deals with polymer modified papers for high wet strength and for special purposes, with laminates, with synthetic fiber papers, and also with plastic-coated papers. Chapters 2 describes the structure, properties, advantages, limitations, and technical uses of flame-sprayed coatings, while Chapter 3 examines the history, development, fabrication, properties, and application of ceramic cutting tools. Chapters 4 and 5 discuss the theoretical and practical aspects of borides, while Chapter 6 focuses on titanium metallurgy. Chapters 7 and 8 present the manufacturing processes, properties, and practical applications of welding and soldering materials. Materials scientists, engineers, researchers, teachers, and students will find this book rewarding.

  • Macromolecular Solutions

    Solvent-Property Relationships in Polymers
    • 1 Edición
    • Raymond B. Seymour + 1 más
    • Inglés
    Macromolecular Solutions: Solvent-Property Relationships in Polymers is a collection of papers presented at a symposium on Macromolecular Solutions, held New York City on August 23-28, 1981, sponsored by the American Chemical Society at its 182nd national meeting. This book is composed of 19 chapters and begins with discussions on the concept, application, and analysis of solubility parameters of polymers. The succeeding chapters deal with the role of solubility parameters in polymer coating design and stress cracking of nylon. Considerable chapters are devoted to the preparation, properties, reactions, and analysis of various polymers and copolymers. These topics are followed by surveys of the polymer-surfactant interaction effect on polymer solution properties and the effects of methanol-gasoline mixtures on elastomers. The final chapters describe the residual solvent content effect on dissolution kinetics of polymers; the application of excimer fluorescence to measure polymer-solvent interactions; and a general procedure for the calculation of thermodynamic properties of polymer solutions. This book will be of great value to polymer chemists, manufacturers, and researchers.

  • Metal Cutting

    • 1 Edición
    • E.M. Trent
    • Inglés
    Metal Cutting is a guide that discusses the process of metal cutting and its different techniques. The book first gives a short history and introduction to metal cutting, and then discusses the operations and terminologies used in metal cutting; the essential features of metal cutting; and the forces involved. The use of heat, the cutting tool materials, the machinability of different metals and alloys, and the use of coolants and lubricants in metal-cutting machines are also explained. The text is recommended for metalworkers and engineers, especially those who are new to the industry, as this book serves as a handy reference for this craft.

  • Electrical Properties of Polymers

    • 1 Edición
    • Donald A. Seanor
    • Inglés
    Electrical Properties of Polymers covers topics on the electrical properties of polymers. The book discusses the electrical conduction in polymers; the structure and charge generation in low-dimensions; and the photophysical processes, energy transfer, and photoconduction in polymers. The text also describes the photovoltaic phenomena in organic solids; thermally stimulated discharge current analysis of polymers; and the polymeric electrets. The contact electrification of polymers and its elimination; and the dielectric breakdown phenomena in polymers are also considered. Materials scientists and chemists will find the book invaluable.

  • Stereoregular Polymers and Stereospecific Polymerizations

    The Contributions of Giulio Natta and His School to Polymer Chemistry
    • 1 Edición
    • Giulio Natta + 1 más
    • Inglés
    Stereoregular Polymers and Stereospecific Polymerizations: The Contributions of Guilio Natta and his School to Polymer Chemistry, Volume 1 covers the developments in understanding the reactions, nomenclature, and physico-chemical properties of polymers. This volume is composed of 82 chapters, and starts with surveys of the synthesis and crystal structure of polymers. Significant chapters are devoted to the characterization of crystalline polymers, with emphasis on the determination of their viscosity and molecular weight. Other chapters deal with stereospecific polymers of olefins, mechanism of stereospecific catalysis, reaction kinetics. This volume also considers the polymerization of synthetic elastomers and the copolymerization of olefins, as well as their reaction kinetics. The remaining chapters describe the X-ray characterization of isotactic polymers. This book is directed toward polymer chemists.

  • Electrical Conduction in Solid Materials

    Physicochemical Bases and Possible Applications
    • 1 Edición
    • J. P. Suchet
    • B. R. Pamplin
    • Inglés
    Electrical Conduction in Solid Materials (Physicochemical Bases and Possible Applications) investigates the physicochemical bases and possible applications of electrical conduction in solid materials, with emphasis on conductors, semiconductors, and insulators. Topics range from the interatomic bonds of conductors to the effective atomic charge in conventional semiconductors and magnetic transitions in switching semiconductors. Comprised of 10 chapters, this volume begins with a description of electrical conduction in conductors and semiconductors, metals and alloys, as well as interatomic bonds and the resistivity of magnetic conductors. Subsequent chapters focus on conventional semiconductors, including intrinsic semiconductors and binary and ternary compounds; compounds containing ordered or disordered atomic magnetic moments, showing paramagnetism of ferro-, ferri-, or antiferromagnetism; and magnetic and crystallographic transitions in switching semiconductors. Organic and inorganic insulators are also considered, along with possible applications of conductors, semiconductors, and insulators. Finally, the special magnetoelectric effects and magneto-optical effects of magnetic semiconductors are analyzed. This book will be a valuable resource for students of physical chemistry.

  • Strength of Metals and Alloys (ICSMA 7)

    Proceedings of the 7th International Conference on the Strength of Metals and Alloys, Montreal, Canada, 12–16 August 1985
    • 1 Edición
    • H. J. McQueen + 2 más
    • Inglés
    Strength of Metals and Alloys, Volume 1 covers the proceedings of the Seventh International Conference on the Strength of Metals and Alloys. The book presents papers that discuss the properties of various metals and alloys. The text contains 133 studies, which are grouped into six sections. The first section covers the work hardening consolidation, while the second section discusses anisotropy and texture. The third section tackles the solute hardening and alloy theory, and the fourth section covers precipitation hardening. The fifth section discusses martensitic and phase transformations, and the sixth section deals with creep resistance. The book will be of great interest to researchers and professionals whose work requires knowledge about the properties of metals and alloys.

  • Materials Principles and Practice

    Electronic Materials Manufacturing with Materials Structural Materials
    • 1 Edición
    • Charles Newey + 1 más
    • Inglés
    Materials Principles and Practice deals with materials science in the technological context of making and using materials. Topics covered include the nature of materials such as crystals, an atomic view of solids, temperature effects on materials, and the mechanical and chemical properties of materials. This book is comprised of seven chapters and begins with an overview of the properties of different kinds of material, the ways in which materials can be shaped, and the uses to which they can be put. The next chapter describes the state of matter as a balance between the tendencies of atoms to stick together (by chemical bonding) or rattle apart (by thermal agitation), paying particular attention to ionic bonds and ionic crystals, the structure and properties of polymers, and transition metals. The reader is also introduced to how the structure of materials, especially microstructure, can be manipulated to give desired properties via thermal, mechanical, and chemical agents of change. This text concludes by describing the chemistry of processing and service of various materials. Exercises and self-assessment questions with answers are given at the end of each chapter, together with a set of objectives. This monograph will be a valuable resource for students of materials science and the physical sciences.

  • Modern Methods for the Separation of Rarer Metal Ions

    • 1 Edición
    • Johann Korkisch
    • Inglés
    Modern Methods for the Separation of Rarer Metal Ions describes several separation methods of more than 50 elements. This book is divided into 19 chapters that include separation methods involving the actinide elements, rare earths, and many rarer elements of the main and transition groups of the periodic table. The introductory chapter discusses the principles of the separation techniques presented in this book. The remaining chapters explore the application of specific separation methods, such as ion exchange, chromatography, liquid-liquid extraction, distillation, and coprecipitation. The approach of each chapter is a presentation of separation principle of an element first followed by numerous examples of applications to the solution of practical problems encountered in separation chemistry. Chapters 2 and 3 examine the separations involving the actinides and rare earth elements using ion exchange and liquid-liquid extraction These are followed by chapters dealing with separations of other rarer elements, which have been arranged according to their position in the periodic table. These elements are: Li, Rb, Cs, Fr, Be, Ra, Ga, In, Tl, Ge, Ag, Au, Ti, Zr, Hf, V, Nb, Ta, Mo, W, Tc, Re and the platinum metals. This book will be of great use to analytical chemists.

  • Materials Data for Cyclic Loading

    Low-Alloy Steels
    • 1 Edición
    • Chr. Boller + 1 más
    • C. Laird
    • Inglés
    Materials Data for Cyclic Loading, Part B: Low-Alloy Steels presents materials data for cyclic loading which provide the basis for materials assessment by direct comparison of data or characteristic values and for estimating the crack initiation lives of low-alloy steels under constant and variable amplitude loading. The data include stress-strain curves, strain life curves, and mean stress parameter life curves for cyclic loading. Each data sheet takes up a maximum of four pages. The first page gives a description of the material and testing procedure. The chemical composition is always given in weight percent and corresponds to the values given in the literature referred to. The second and third pages show the diagrams for: stress-strain curves for monotonic and cyclic loading; strain life curve;, and mean stress (damage) parameter life curve according to the parameter of Smith, Watson and Topper. Unless indicated otherwise in the plots, the experiments were carried out at room temperature in laboratory air. The diagrams for the stress-strain relationships contain at the most three curves, one for monotonic loading and two for cyclic loading, the latter being evaluated from incremental step tests and constant amplitude tests. All three curves can be described approximately by an analytical function. This book will be of interest to materials scientists.

  • The Refractory

    • 1 Edición
    • Edmund K. Storms
    • John L. Margrave
    • Inglés
    The Refractory Carbides is intended as a guide to the chemist who wishes to undertake a fundamental study of refractory carbide systems. No effort has been made to discuss all of the properties for which information is available. Rather, the selection is intended to give the reader information and some insights which are basic to any measurement. This work includes a number of the more important physical and chemical properties of the nine transition elements included in Groups 4, 5, and 6 of the 4th, 5th, and 6th periods. The three actinide systems, Th-C, U-C, and Pu-C, have also been discussed. While this limited selection does not include all of the high melting carbides, it does include the more refractory and the more useful ones. These systems offer a unique collection of properties for an understanding of the chemical bond. Each system is discussed individually in terms of each property. These include phase relationship, lattice parameter and structure, chemical stability, hardness, and thermochemical properties which include vaporization behavior. In addition, the thermal data for the carbides and many of the associated elements have been reevaluated.

  • Electrodeposition of Alloys

    Principles and Practice
    • 1 Edición
    • Abner Brenner
    • Inglés
    Electrodeposition of Alloys: Principles and Practice, Volume I covers the general and theoretical aspects of the electrodeposition of alloy containing silver and/or copper. This book is organized into three parts encompassing 21 chapters. The first part considers first the history of electrodeposition, the applications of electrodeposited alloys, and the practical considerations involved in electrodeposition. This part also deals with the effect of operating variables on composition of electrodeposited alloys, and the physico-chemical properties of the alloy. The second part focuses on the theoretical aspects of alloy electrodeposition. This part includes discussions on the role of cathode diffusion layer, the effects of complexing agents, and the concept of alloy plating. The third part discusses the practical aspects of the electrodeposition of alloys, focusing primarily on the electrodeposition of alloys from aqueous solutions. This part examines first brass and bronze plating, followed by the electrodeposition of copper-tin, silver, and iron containing alloys. This book is directed toward electrochemists and researchers.

  • Metal—Ammonia Solutions

    Proceedings of an International Conference on the Nature of Metal-Ammonia Solutions: Colloque Weyl II
    • 1 Edición
    • Sam Stuart
    • Inglés
    Metal-Ammonia Solutions contains the proceedings of an International Conference on the Nature of Metal-Ammonia Solutions Colloque Weyl II held at Cornell University in Ithaca, New York, on June 15-19, 1969. The papers explore the nature of metal-ammonia solutions and cover topics ranging from the dilemma of metal-ammonia models to the magnetic properties of metal-ammonia solutions, the reactions of such solutions, and solid metal-ammonia compounds. This monograph is comprised of 39 chapters and begins with an overview of models for the concentration dependence of the properties of dilute metal-ammonia solutions. The discussion then turns to a continuous dielectric model for the solvated dielectron in dielectric media; elementary electronic excitations in insulating liquids; and magnetic properties of metal-ammonia solutions. The chapters that follow focus on the kinetics of the reaction between sodium and ethanol in liquid ammonia; electrons trapped in solids; metal-nonmetal transition and phase separation; and optical spectra of alkali metal-ammonia solutions. This text will be a valuable resource for chemists and chemistry students.

  • Smithells Metals Reference Book

    • 7 Edición
    • E A Brandes + 1 más
    • Inglés
    Reviews of previous editions:'A publication of no equal that has become an essential reference during its 35 years of publication' ASLIB Book List'All metallurgists will covet a copy of Smithells' Chemistry and Industry'(It) provides an invaluable reference source for all workers, libraries and research laboratories in the field of engineering and metallurgy' BNF AbstractSmithells is the only single volume that provides all the data and references needed by those practicing metallurgy. The seventh edition of this standard reference work for metallurgists includes important new chapters on powder metallurgy and superconductivity. All chapters have been thoroughly revised to bring them up to date with developments since the last edition in 1983. In all this is the most complete compendium of information for industrial and theoretical metallurgists, and it is now available in a more accessible format including current data to 1997.Also available is Smithells Light Metals Handbook (ISBN 0750636254).

  • Conformation of Biopolymers

    Papers Read at an International Symposium Held at the University of Madras, 18-21 January 1967
    • 1 Edición
    • G. N. Ramachandran
    • Inglés
    Conformation of Biopolymers, Volume 2 provides information pertinent to proteins, polypeptides, and polysaccharides. This book discusses the development in the studies on collagen and related polypeptides. Organized into three parts encompassing 24 chapters, this volume begins with an overview of the structure of polyglycine II with chains running in opposite directions as indicated by the existence of lamellar crystals in electron microscopy. This text then explores the capability of various polypeptides to form the collagen fold. Other chapters consider the effect of pyrrolidine residues on the helix–coil transitions of different native collagens and cross-linked single chain gelatins. This book discusses as well the results of hydrodynamic experiments on native amylose. The final chapter deals with X-ray and electron microscope studies, which are described for two principal types of chitin–protein complex found in insect cuticles. This book is a valuable resource for physicists, biophysicists, crystallographers, and research workers.

  • Epitaxial Growth

    • 1 Edición
    • J. W. Matthews
    • Inglés
    Epitaxial Growth Part B is the second part of a collection of review articles that describe various aspects of the growth of single-crystal films on single-crystal substrates. The topics discussed are the nucleation of thin films, the structure of the interface between film and substrate, and the generation of defects during film growth. The methods used to prepare and examine thin films are described and a list of the overgrowth-substrate combinations studied so far is given.

  • The Fabrication of Materials

    Materials Technology
    • 1 Edición
    • J. G. Tweeddale
    • Inglés
    Materials Technology, Volume 2: The Fabrication of Materials deals with the processes of materials fabrication. This book focuses on systems used to transform raw materials into shaped states suitable for practical service. Principles of manufacture are discussed, along with the advantages and disadvantages of each method of fabrication and the diverse manufacturing sequences that are possible. The administrative aspects of manufacture are also considered. This volume is comprised of eight chapters and begins by introducing the reader to casting methods, including solidification casting, gravity-flow mold-filling, and pressurized mold-filling. Emphasis is placed on how materials that are reduced to a liquid state and then solidified can be prepared for service or formed to a useful shape. The chapters that follow explore powder preparation, mixing, compacting, and consolidation; mechanical means of fabrication; fabrication by bonding and machining; and the role of inventors and designers in fabrication. This volume concludes by assessing the economic aspects of fabrication, with particular reference to essential needs, conveniences, and luxuries. This book will be useful to first-year university undergraduates in engineering technician courses and more specialized technician courses.

  • Applications and Non-Metals

    Advances in Research on The Strength and Fracture of Materials
    • 1 Edición
    • D.M.R. Taplin
    • Inglés
    Advances in Research on the Strength and Fracture of Materials: Volume 3Bs—Applications and Non-Metals contains the proceedings of the Fourth International Conference on Fracture, held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to testing of fracture in a wide range of non-metals such as ceramics, glass, composites, polymers, biomaterials, and concrete. This volume is divided into five sections and opens by discussing the role of acoustic emission in fracture toughness testing and the relation between static and dynamic fracture toughness of structural steels. The reader is then introduced to methods for determining stress-intensity factors of simplified geometries of structural parts; stress analysis of pressure vessels by thermal shock; the fracture toughness of constructional steels in cyclic loading; and fracture processes and fracture toughness in powder forged steels. The remaining chapters explore the influence of low-cycle damage on fracture toughness; fracture of structural alloys at temperatures approaching absolute zero; fracture mechanisms in Si-Al-O-N ceramics; propagation and bifurcation of cracks in quartz; and the effect of pressure and environment on the fracture and yield of polymers. This monograph will be a useful resource for metallurgists, materials scientists, and structural and mechanical engineers.

  • Refractory Transition Metal Compounds

    High Temperature Cermets
    • 1 Edición
    • G. V. Samsonov
    • Inglés
    Refractory Transition Metal Compounds: High Temperature Cermets focuses on the properties, reactions, transformations, and characteristics of refractory compounds. The selection first offers information on continuous-discrete character of variation of the type of bonding in refractory compounds of transition metals, principles of classification of refractory compounds, and calculation of the energy of crystal lattices of inorganic compounds. The text also takes a look at the X-ray spectral investigation of chemical bonding forces in hydrides of refractory metals, using titanium and vanadium compounds as examples and comparison of X-ray K absorption spectra in compounds of chromium with elements of subgroup IV. The manuscript elaborates on the X-ray spectra and interatomic bond in solid metallic compounds and behavior of components of metal solid solutions in a field of electrical forces. The publication also examines the electrical properties of hexaborides of several rare earth metals and the thermionic emission properties of scandium gadolinium borides. The book is a dependable reference for readers wanting to study refractory compounds.

  • Pressure Diecasting

    Metals — Machines — Furnaces
    • 1 Edición
    • B. Upton
    • Inglés
    Pressure Diecasting, Part 1: Metals-Machines-Furn... covers topics on surface treatments, joining methods, process practices, inspection techniques, and many other features concerned with materials engineering. Organized into six chapters, this book first explains the process of pressure diecasting. Subsequent chapters then discuss the pressure diecasting alloys and machines. Other chapters describe furnaces used in pressure diecasting and the assessment of their performance; health and safety in pressure diecasting foundries; and some applications of statistics to pressure diecasting foundry variables. Readers will find this book useful in developing his excellence and practices in the field.

  • Polymer Fractionation

    • 1 Edición
    • Manfred J. R. Cantow
    • Inglés
    Polymer Fractionation focuses on the processes, reactions, and transformations involved in polymer fractionation, including chromatography, titration, and sedimentation. The selection first offers information on theoretical considerations and fractional precipitation. Topics include polydispersity of high polymers, phase relations for polydisperse systems, fractionation theory and efficiency, and fractionation by solvent evaporation. The manuscript then takes a look at fractional solution, chromatographic fractionation, and gel permeation chromatography. The book elaborates on thermal diffusion and turbidimetric titration, as well as methods of fractionation, studies of the variables, outline of the method and range of application, and elaboration of the method. The text then ponders on sedimentation, isothermal diffusion, and summative fractionation. Discussions focus on mathematical interpretation of summative data, experimental methods for the determination of diffusion constants, and methods for the determination of the diffusion coefficient distribution. The selection is a valuable source of information for readers interested in polymer fractionation.

  • Metal Resources and Energy

    Butterworths Monographs in Materials
    • 1 Edición
    • P. F. Chapman + 1 más
    • Michael Ashby + 2 más
    • Inglés
    Metal Resources and Energy was initially aimed at exploring the future availability of metals and the energy required to produce them. During the detailed planning of the book, the authors decided to extend the remit to consider fuel use in relation to resources and future availability. In order to explore this relationship a framework was established which provided an agenda of topics to examine. In the process of systematically working through this agenda a deeper understanding of resource issues and some new insights were obtained. This book develops a framework for assessing the future availability of metals by first reviewing the activities associated with the production of metals. These can be divided into four broad categories: exploration and establishment, mining, concentrating, and smelting and refining. It then examines factors such as energy economics, forecasting issues, resources and reserves estimation, and trends in technical efficiency. Subsequent chapters deal with the evaluation of fuel use in metals production; the secondary production of metals from scrap and other waste materials; non-technical issues that are potential sources of short-term crises; and other applications of energy data. This book is intended for final year students of engineering, geology, and economics, all of whom will find all the topics covered relevant to their studies. It attempts to convey the essentials of resource economics, metal production technology, energy analysis, and those aspects of geology and geochemistry which are pertinent to a study of resource issues. The full breadth of topics is covered at a depth which is comprehensible to students from other disciplines.

  • Modern Metallography

    The Commonwealth and International Library: Metallurgy Division
    • 1 Edición
    • R. E. Smallman + 1 más
    • W. S. Owen + 2 más
    • Inglés
    Modern Metallography focuses on the defects in the properties of metals, such as precipitates, cracks, grain boundaries, dislocations, stacking faults, and impurity atoms. The publication first offers information on reflected light microscopy and high temperature microscopy. Discussions focus on specimen preparation, defects of lenses, methods of increasing the resolving power of an objective, long working distance objectives, and typical hot-stage experiments. The text then elaborates on surface topography and polarizing microscope, including oblique illumination, interferometry, examination of anisotropic surfaces, and other uses of polarized light microscopy. The text takes a look at X-ray metallography and specialized X-ray diffraction techniques. Topics include Laue method and orientation, structure factor, powder method and the accurate measurement of lattice parameters, Bragg law, sheet textures, and preferred orientation. The publication further elaborates on electron microscopy and metallography at the atomic level. The manuscript is a valuable reference for students and readers interested in modern metallography.

  • Metals and Materials

    Science, Processes, Applications
    • 1 Edición
    • R. E. Smallman + 1 más
    • Inglés
    Metals and Materials: Science, Processes, Applications aims to present the science of materials in a readable and concise form that leads naturally to an explanation of the ways in which materials are processed and applied. The science of metals, or physical metallurgy, has developed naturally into the wider and more diverse discipline of materials science. The study of metals and alloys still forms a large and important part of this relatively new discipline, but it’s common to find that fundamental principles and concepts of physical metallurgy can be adapted to explain the behavior of a variety of non-metallic materials. As an aid to fully study this discipline, each chapter has been supplemented with a list of specialized references. These references include images and diagrams that illustrate the subtleties of materials, such as micrographs of grain structures and fine-scale defects, phase diagrams for metals and ceramics, electron diffraction patterns revealing atomic arrangements, specific property diagrams correlating the behavior of different materials, and slip vector diagrams for deforming crystals. Throughout this book, sufficient background and theory is provided to assist students in answering questions about a large part of a typical degree course in materials science and engineering. Some sections provide a background or point of entry for postgraduate studies and courses.

  • Electrodeposition of Alloys

    Principles and Practice
    • 1 Edición
    • Abner Brenner
    • Inglés
    Electrodeposition of Alloys: Principles and Practice, Volume II: Practical and Specific Information provides sufficient information for preparing and operating alloy plating baths. This book is organized into five sections encompassing 21 chapters that also consider the facts and theory of alloy plating. The five sections discuss the five types of alloy plating system with respect to the plating variables. Each section deals with the fundamental bases of alloy deposition, which have been summed up in six principles. This book further examines the role of diffusion in alloy deposition and the role of the density versus potential relations in alloy deposition, as well as certain misconceptions regarding their value in alloy deposition have been pointed out. This book will prove useful to electrochemists, researchers, and electrochemistry teachers and students.

  • Phase Transitions - 1973

    Proceedings of the Conference on Phase Transitions and Their Applications in Materials Science, University Park, Pennsylvania, May 23-25, 1973
    • 1 Edición
    • H. K. Henisch + 2 más
    • Inglés
    Phase Transitions - 1973 is a collection of the proceedings of the Conference on Phase Transitions and Their Applications in Materials Science, held at Pennsylvania State University, Pennsylvania, on May 23-25, 1973. The papers explore some of the practical applications of solid-state phase transitions and consequent precursor property modifications in metals, ceramics, glasses, polymers, macromolecules, and biological systems. Comprised of 41 chapters, this book begins with an introduction to applications of phase transitions in materials science, followed by a syncretist classification of phase transitions. Subsequent chapters discuss phase transitions in materials such as liquid crystals, PLZT ceramics, disordered semiconductors, silver iodide single crystals, and aluminum alloys. The structural aspects of phase transitions are also considered, along with the statistical mechanics of glass transition; thermal expansion and phase transitions in silica; phase transformation of Fe-Mn alloys induced by shock loading; and order-disorder transitions in biopolymers. This monograph will be of interest to physicists and materials scientists.

  • High Explosives and Propellants

    • 2 Edición
    • S. Fordham
    • Inglés
    High Explosives and Propellants, Second Edition is a four-part book classified into High Explosives, Blasting Accessories, Application of High Explosives, and Deflagrating and Propellent Explosives. Part I, High Explosives, centers on the general principles, manufacture, design, and assessment of this type of explosive. Part II, Blasting Accessories, describes initiation of explosives and different types of detonators. Part III, Application of High Explosives, deals with the commercial and military applications of high explosives. The last part, Deflagrating and Propellent Explosives, discusses the manufacture, properties, design, and application of propellants.

  • Stereospecific Polymerization of Isoprene

    • 1 Edición
    • Elena Ceausescu
    • Inglés
    Publisher's Note: The Publisher has received information from members of the Romanian academic community questioning the role of Elena Ceausescu as the author on this book, claiming that she did not in fact write the work as her PhD dissertation and should not have been listed as the author. This work is translated into English from a book first published by Editura Academiei Republicii Socialiste Romania (Bucharest, 1979). The Publisher is posting this note to make readers aware of the concern that has been raised. Stereospecific Polymerization of Isoprene, a doctoral dissertation by Dr. Elena Ceausescu, is a study of the synthesis of cis-l, 4-polyisoprene rubber, an elastomer of synthetic rubber whose structure and properties are similar to that of natural rubber. This elastomer is primarily used in the manufacture of tires, belts, hoses, matting, flooring, dampeners, and other synthetic rubber goods. The book is organized into two parts. Part I, the Ph.D. thesis, focuses on the explanation and exposition of the polymerization reaction; properties of the polymer; and certain theoretical aspects related to the polymer’s reaction mechanism and kinetics. Part II presents data derived from an extensive variety of experiments and tests intended to serve as a basis for the industrial production of cis-l, 4-polyisoprene rubber. The text will be an interesting book for materials engineers, industrial engineers, chemists, and science students engaged in the study of polymers.

  • Magnetism and Magnetic Materials

    1965 Digest
    • 1 Edición
    • R L White + 1 más
    • Inglés
    Magnetism and Magnetic Materials: 1965 Digest: A Survey of the Technical Literature of the Preceding Year focuses on the processes, methodologies, reactions, technologies, and advancements in magnetism and magnetic materials. The selection first offers information on general theoretical problems, including spin-wave dispersion, exchange integral, magnetic ordering, soluble models, magnetic phase transitions, and conduction electron spin polarization. The text then ponders on neutron diffraction, spin configurations, and magnetic transitions and properties of transition metals and their alloys. Topics include neutron scattering theory and equipment; spin configurations and magnetic transitions; magnetic behavior; rare earth alloys and compounds; and other alloys and compounds. The publication takes a look at the properties of magnetically dilute alloys and rare earth metals and their alloys. Discussions focus on rare earth intermetallic compounds, transition metals in noble metals, and other dilute alloys. The text then examines the technical properties of soft magnetic materials, magnetically hard materials, thin films, and nuclear magnetism. The selection is a valuable source of data for readers interested in magnetism and magnetic materials.

  • Recent Research on Wood and Wood-Based Materials

    Current Japanese Materials Research
    • 1 Edición
    • Nobuo Shiraishi + 2 más
    • Inglés
    Current Japanese Materials Research, Volume 11: Recent Research on Wood and Wood-Based Materials is a collection of papers that details the advancement of the field of wood science and technology in Japan. The coverage of the book includes various technological processes applied to wood, including steam-injection, chemically modification, and plasticization. The text also presents studies that cover the fundamental aspects of wood technology, such as structure and chemical composition of wood as a natural composite material; wood-preserving techniques to prevent biodeterioration; and wood as a livable interior material. The book will be of great use to researchers and professionals from various disciplines, including botany, engineering, and agriculture.

  • Laser and Ion Beam Modification of Materials

    Proceedings of the Symposium U: Material Synthesis and Modification by Ion Beams and Laser Beams of the 3rd IUMRS International Conference on Advanced Materials, Sunshine City, Ikebukuro, Tokyo, Japan, August 31 - September 4, 1993
    • 1 Edición
    • I. Yamada + 2 más
    • Inglés
    Laser and Ion Beam Modification of Materials is a compilation of materials from the proceedings of the symposium U: Material Synthesis and Modification by Ion beams and Laser Beams. This collection discusses the founding of the KANSAI Science City in Japan, and the structures, equipment, and research projects of two institutions are discussed pertaining to eV-MeV ion beams. A description of ion beams as used in materials research and in manufacturing processes, along with trends in ion implantation technology in semiconductors, is discussed. Research into ion beams by China and its industrial uses in non-semiconductor area is noted. For industrial applications, developing technology in terms of high speed, large surface modifications and use of high doses is important. Thus, the development of different ion beam approaches is examined. Industrial applications of ion and laser processing are discussed as cluster beams are used in solid state physics and chemistry. Mention is made on a high power discharge pumped solid state physics (ArF) excimer laser as a potential light source for better material processing. Under ion beam material processing is nanofabrication using focused ion beams, important for research work in mesoscopic systems. Progress in the use of ion-beam mixing using kinetic energy of ion-beams to mingle with pre-deposited surface layers of substrate materials has shown promise. Advanced materials researchers and scientists, as well as academicians in the field of nuclear physics, will find this collection helpful.

Temas relacionados