Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Heat Transfer

    Non-Stationary Heat Transfer Through Walls, Measurement of Thermal Conductivity, Heat Transfer with Two Phase Refrigerants
    • 1 Edición
    • Sam Stuart
    • Inglés
    Heat Transfer: Current Applications of Air Conditioning deals with problems and applications of air conditioning. The discussions are organized around non-stationary heat transfer through walls; study of confined rooms or enclosures; calculation of cooling loads; heat transfer with two-phase refrigerants; measurement of thermal conductivity and water vapour permeability of insulating materials; and tests on air handling equipment (room air-conditioners, induction or fan coil air-conditioners). This book is comprised of 60 chapters and begins with an assessment of the unit-system controversy in the United States and the quest for an ultimate resolution. The following chapters explore the resolution of conductive heat transfer problems using the finite element method; thermal behavior of composite walls under transient conditions; thermal and electrical models for solving problems of non-stationary heat transfer through walls; and use of a radiometer to measure the average temperature of a wall. Experimental results for mixed air convection along a vertical surface are also presented. This monograph will be a valuable resource for electronics engineers.

  • A Student's Guide to Efficient Study

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • D. E. James
    • Inglés
    A Student's Guide to Efficient Study serves as a guide for students to cope adequately with the demands made on them. This book discusses the various techniques of study to help students in the process of learning. Comprised of five chapters, this book starts with an overview of the definition, purpose, as well as the psychology of ""study"". This text then examines the processes underlying the coordination of a person with his or her surroundings. Other chapters consider the primary mental processes that are essential in the discussion of ""study"". This book discusses as well some of the problems involved in picking up information from the environment and passing it into the mind where it can be kept for future use. The final chapter deals with the practical ideas for improving study. This book is a valuable resource for teachers and students who are interested in improving their studying techniques.

  • Electric Circuit Theory

    Applied Electricity and Electronics
    • 1 Edición
    • R. Yorke
    • P. Hammond
    • Inglés
    Electric Circuit Theory provides a concise coverage of the framework of electrical engineering. Comprised of six chapters, this book emphasizes the physical process of electrical engineering rather than abstract mathematics. Chapter 1 deals with files, circuits, and parameters, while Chapter 2 covers the natural and forced response of simple circuit. Chapter 3 talks about the sinusoidal steady state, and Chapter 4 discusses the circuit analysis. The fifth chapter tackles frequency response of networks, and the last chapter covers polyphase systems. This book will be of great help to electrical, electronics, and control engineering students or any other individuals who require a substantial understanding of the physical aspects of electrical engineering.

  • Fracture of Metals

    An Advanced Treatise
    • 1 Edición
    • H. Liebowitz
    • Inglés
    Fracture of Metals is part of a multivolume treatise that brings together the fundamentals for critical evaluation of the different theories and experimental findings on brittle fracture. These results, together with their design implications, should be made available to professional engineers, students, and researchers in industrial organizations, educational and research institutions, and various governmental agencies. Seven major areas are covered in this treatise on fracture. They are: (1) microscopic and macroscopic fundamentals of fracture; (2) mathematical fundamentals of fracture; (3) engineering fundamentals of fracture and environmental effects; (4) engineering fracture design; (5) fracture design of structures; (6) fracture of metals; and (7) fracture of nonmetals and composites. The present volume focuses on the fracture of metals. The book opens with chapter on the influence of alloying elements on fracture behavior in metallic systems of the three common crystal structures: face-centered cubic, body-centered cubic, and hexagonal close packed. Separate chapters follow on the principal microstructural factors which seem to be important for fracture toughness; the nature of the fracture processes occurring in high-strength materials; and the state of knowledge on fracture toughness of structural steels. Subsequent chapters deal with the strength and toughness of hot-rolled, ferrite-pearlite steels; fracture behavior of aluminum and its alloys; and fracture phenomena associated with electrical effects.

  • Plastics as Corrosion-Resistant Materials

    The Commonwealth and International Library: Plastics Division
    • 1 Edición
    • V. Evans
    • A. Kennaway + 1 más
    • Inglés
    Plastics as Corrosion-Resistant Materials presents the properties and applications of corrosion-resistant plastics. The book serves as a source of information for people who are looking for practical solutions with their corrosion problems. The book focuses on plastic materials and proven anti-corrosion methods with the use of plastics. It starts by discussing the general properties and applications of plastics. Fabrication of equipments and structures using one or a combination of plastic bases; and use and assembly of plastic pipes and fittings, linings, and coatings are covered as well. Engineers, technicians, plumbers, carpenters, homeowners, and hobbyists will find this book of considerable value.

  • Basic Hydraulics

    • 1 Edición
    • P D Smith
    • Inglés
    BASIC Hydraulics aims to help students both to become proficient in the BASIC programming language by actually using the language in an important field of engineering and to use computing as a means of mastering the subject of hydraulics. The book begins with a summary of the technique of computing in BASIC together with comments and listing of the main commands and statements. Subsequent chapters introduce the fundamental concepts and appropriate governing equations. Topics covered include principles of fluid mechanics; flow in pipes, pipe networks and open channels; hydraulic machinery; and seepage and groundwater flow. Each chapter provides a series of worked examples consisting primarily of an introduction in which the general topic or specific problem to be considered is presented. A program capable of solving the problem is then given, together with examples of the output, sometimes for several different sets of conditions. Finally, in a section headed Program Notes the way the program is constructed and operates is explained, and the engineering lessons to be learned from the program output are indicated. Each chapter also concludes with a set of problems for the student to attempt. This book is mainly intended for the first- and second-year undergraduate student of civil engineering who will be concerned with the application of fundamental fluid mechanics theory to civil engineering problems.

  • Light and Heavy Vehicle Technology

    • 2 Edición
    • M.J. Nunney
    • Inglés
    Light and Heavy Vehicle Technology, Second Edition deals with the theory and practice of vehicle maintenance, procedure, and diagnosis of vehicle trouble, including technological advances such as four-wheel drive, four-wheel steering, and anti-lock brakes. The book reviews the reciprocating piston petrol engine, the diesel engine, the combustion chambers, and the different means of combustion processes. To counter friction, heat and wear, lubrication to the different moving parts is important. To counter excessive heat which can cause breakdown of lubricating oil films and materials such as gaskets, O-rings, the engine is designed with a cooling system that uses air, water, or engine coolants. Petrol engines use the carburation or injection type of fuel delivery; diesel engines use a high pressure system of fuel injection owing to the higher pressures existing in the diesel combustion chamber. The text explains the operation of the other parts of the vehicle including the ignition and starter system, emission controls, layshaft gearboxes, drive lines, and suspension systems. Heavy vehicles need highly efficient air brakes to stop them compared to the hydraulic brake systems used in smaller and lighter vehicles. The book is suitable for mechanical engineers, engine designers, students, and instructors in mechanical and automotive engineering.

  • Radio and Line Transmission

    The Commonwealth and International Library: Electrical Engineering Division, Volume 2
    • 1 Edición
    • Dermot Roddy
    • N. Hiller
    • Inglés
    Radio and Line Transmission, Volume 2 gives a detailed treatment of the subject as well as an introduction to additional advanced subject matter. Organized into 14 chapters, this book begins by explaining the radio wave propagation, signal frequencies, and bandwidth. Subsequent chapters describe the transmission lines and cables; the aerials; tuned and coupled circuits; bipolar transistor amplifiers; field-effect transistors and circuits; thermionic valve amplifiers; LC oscillators; the diode detectors and modulators; and the superheterodyne receiver. Other chapters explore noise and interference in the transmission; the negative feedback that occurs in amplifier; and the methods used in the field of electronic measurements. This volume will be very valuable to technicians in the electrical engineering industry.

  • Solid-State Circuits

    Electrical Engineering Divison
    • 1 Edición
    • G. J. Pridham
    • N. Hiller
    • Inglés
    Solid-State Circuits provides an introduction to the theory and practice underlying solid-state circuits, laying particular emphasis on field effect transistors and integrated circuits. Topics range from construction and characteristics of semiconductor devices to rectification and power supplies, low-frequency amplifiers, sine- and square-wave oscillators, and high-frequency effects and circuits. Black-box equivalent circuits of bipolar transistors, physical equivalent circuits of bipolar transistors, and equivalent circuits of field effect transistors are also covered. This volume is divided into three sections comprised of 11 chapters and begins with an introduction to the basic physics of bulk semiconductors, diodes, and transistors, along with the construction and characteristics of devices and integrated circuits. Physics is kept to the minimum necessary for the understanding of devices. Attention then turns to the fundamental use of semiconductors in rectifier, amplifier, and oscillator circuits. The high frequency use of transistors is given consideration, and in all examples designs from device characteristics are included. The remaining chapters focus on the development of equivalent circuits of transistors. This approach highlights the alternating current operation of devices, and some of the more sophisticated circuits using semiconductor devices are demonstrated. This book will be of interest to students and practitioners of electronics and electrical engineering.

  • Fundamentals of Rolling

    • 1 Edición
    • Zygmunt Wusatowski
    • Inglés
    Fundamentals of Rolling presents the theoretical knowledge of longitudinal rolling in a comprehensive procedure. This book discusses the basic theory and principles of rolling processes. Comprised of seven chapters, this book begins with an overview of the three principal methods of rolling, including longitudinal, transverse, and skew rolling processes. This text then illustrates the constrained yield stress distribution along the gap due to work hardening on cold rolling between ideally smooth rolls. Other chapters consider the range of application of various types of rolls and show the basic dimensions of a roll. This book discusses as well the different types of rolls for various rolling mills, including blooming, plate, sheet, sheet bar, small section, heavy product, skin passing, and cold rolling mills. The final chapter explains the purpose of roll pass design to ensure the maximum output at minimum cost as well as to reduce the roll wear to a minimum. This book is a valuable resource for rolling mill engineers.

  • Technology in the Modern Corporation

    A Strategic Perspective
    • 1 Edición
    • Mel Horwitch
    • Inglés
    Technology in the Modern Corporation: A Strategic Perspective examines the role of technology in corporate planning and all that this relationship implies to corporate organization and strategy. Organized into 13 chapters, this book first discusses the management of corporate entrepreneurship; technological innovation and interdependence; and the rise and character of modern technology strategy. Subsequent chapters describe corporate research and development; corporate strategies for managing emerging technologies; approaches for the strategic management of technology; innovation and corporate strategy; and executive succession, strategic reorientations, and organization evolution.

  • Introduction to the Properties of Crystal Surfaces

    International Series on Materials Science and Technology
    • 1 Edición
    • J. M. Blakely
    • W. S. Owen
    • Inglés
    Introduction to the Properties of Crystal Surfaces is an introductory text on crystal surfaces and their properties. A variety of phenomena, including electron emission, adsorption and oxidation, adhesion, friction, nucleation and epitaxial growth, and heterogeneous catalysis, are described by considering the details of the atomic and electronic structure in the surface region. This volume is comprised of seven chapters and begins with a discussion on the thermodynamics of surfaces, along with the equilibrium configuration at the intersection of interfaces and the effects of curvature of crystalline surfaces. The next chapter examines the properties of interfaces in multi-component systems, followed by an analysis of experimental measurements of surface tension in solids. The atomic structure of crystal surfaces and some theoretical aspects of surface studies are also considered, and experimental methods in used in such studies are outlined. The final chapter deals with two atomic processes that are involved in a number of reactions at crystal surfaces: surface atomic diffusion and adsorption. This book is intended for senior undergraduates in a materials science type of curriculum or those beginning research work in the field or associated areas.

  • Fatigue of Metals

    • 1 Edición
    • P. G. Forrest
    • Inglés
    Fatigue of Metals provides a general account of the failure of metals due to fatigue, a subject of great practical importance in the field of engineering and metallurgy. The book covers a wide range of topics on the study of the fatigue of metals. The text presents in the first three chapters the characteristics and detection of fatigue fractures; methods of fatigue testing; and the fatigue strengths of different materials. The resistance of materials to fatigue under complex stress; the determination and effects of stress concentration; influence of surface treatment on fatigue strength; and effects of corrosion and temperature are also studied in detail. In relation to the previous chapters of fatigue information, a chapter is devoted to engineering design to prevent fatigue. The last two chapters provide a brief historical survey of the developments of the study of the mechanism of fatigue and fatigue of non-metallic materials such as wood, plastic, rubber, glass, and concrete. Mechanical engineers, designers, metallurgists, researchers, and students will find the book as a good reference material.

  • Engineering Calculations in Radiative Heat Transfer

    International Series on Materials Science and Technology
    • 1 Edición
    • W. A. Gray + 1 más
    • D. W. Hopkins
    • Inglés
    Engineering Calculations in Radiative Heat Transfer is a six-chapter book that first explains the basic principles of thermal radiation and direct radiative transfer. Total exchange of radiation within an enclosure containing an absorbing or non-absorbing medium is then described. Subsequent chapters detail the radiative heat transfer applications and measurement of radiation and temperature.

  • Radio and Line Transmission

    Electrical Engineering Division, Volume 1
    • 1 Edición
    • Dermot Roddy
    • N. Hiller
    • Inglés
    Radio and Line Transmission, Volume 1 provides an introduction to the basic principles of radio and line transmission. This book serves as a guide for technicians in the electrical engineering industry. Organized into 14 chapters, this volume starts with an overview of the definition of wave motion, which is a significant concept in the study of communications methods. This text then explains decibel as the most convenient practical unit based on logarithms. Other chapters consider the frequency ranges for speech and music. This book describes as well the harmonic composition of sound waves and the frequency analysis of speech. The final chapter presents the fundamental feature of all telegraph systems, which is the use of codes such as the Morse code, cable code, and the five-unit even-length code. This book is a valuable resource for electrical technicians engaged in radio communications. Senior technicians on national certificate courses will also find this book extremely useful.

  • Software Engineering

    • 1 Edición
    • Marc Thorin
    • Inglés
    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a processor can take into account only imperative, occasionally adverbial, statements written in an artificial language. The third chapter explains how to define the general characteristics of actions so that they may be expressed using an artificial language conceived by an interlocutor of Indo-European idiom. The fourth chapter looks at general and technical criteria, and the fifth chapter deals with all the fundamental structures of entities. The final chapter considers a rational method of determining the actions. This book is a valuable resource for software designers and students taking computer courses.

  • How to Find Out About Engineering

    The Commonwealth and International Library: Libraries and Technical Information Division
    • 1 Edición
    • S. A. J. Parsons
    • G. Chandler
    • Inglés
    How to Find Out About Engineering provides a guide to sources of information on engineering and its various branches. Topics include branches of engineering, careers in engineering, sources of engineering-related information, libraries, handbooks, patents, dictionaries and encyclopedias, and periodical literature. Engineering organizations as well as education and training for careers in engineering are also considered. This volume consists of 20 chapters; the first of which introduces the reader to jobs available in the engineering industry, along with guides and sources of information on careers. The discussion then turns to sources of information on engineering such as bibliographies, reference works, publishers' and booksellers' catalogs, government publications, and industrial liaison centers in Britain. The chapters that follow focus on libraries and other sources of information that are available to engineers and engineering students, including handbooks, standards, patents, and technical drawings and designs. Dictionaries, encyclopedias, theses, and translations are also covered. In addition, the book includes chapters on the history and biography of engineering as well as different branches of engineering, from mechanical to chemical, aeronautical, and agricultural engineering. This book will be of interest to all persons engaged in the engineering profession or are contemplating on entering the profession.

  • Lubrication

    A Practical Guide to Lubricant Selection
    • 1 Edición
    • A. R. Lansdown
    • Inglés
    Lubrication: A Practical Guide to Lubricant Selection provides a guide to modern lubrication practice in industry, with emphasis on practical application, selection of lubricants, and significant factors that determine suitability of a lubricant for a specific application. Organized into 13 chapters, this book begins with a brief theoretical opening chapter on the basic principles of lubrication. A chapter then explains the choice of lubricant type, indicating how to decide whether to use oil, grease, dry lubricant, or gas lubrication. Subsequent chapters deal with detailed selection of lubricating oils, oil systems, oil changing, greases, dry lubricants, gas lubrication, sealing, testing, monitoring, and handling of lubricants. The final chapter describes the main hazards associated with lubricants and some of the techniques for controlling those hazards. This book will be of value to technical staffs who use lubricants in their work; to students of mechanical, production, or maintenance engineering; and to others, such as buyers and storekeepers concerned with lubricants.

  • Fourier Transforms

    And Convolutions for the Experimentalist
    • 1 Edición
    • R.C. Jennison
    • Inglés
    Fourier Transforms and Convolutions for the Experimentalist provides the experimentalist with a guide to the principles and practical uses of the Fourier transformation. It aims to bridge the gap between the more abstract account of a purely mathematical approach and the rule of thumb calculation and intuition of the practical worker. The monograph springs from a lecture course which the author has given in recent years and for which he has drawn upon a number of sources, including a set of notes compiled by the late Dr. I. C. Browne from a series of lectures given by Mr. J . A. Ratcliffe of the Cavendish Laboratory. The book begins with an introduction to Fourier Transform. It provides a definition o Fourier Transform, describes its applications, and presents the formal mathematical statement of the transform. Separate chapters discuss the elementary transform, extended functions, and direct applications of Fourier transforms. The final two chapters deal with limitations, products, and convolutions; and the differentiation of Fourier transforms.

  • Data Processing

    Made Simple
    • 2 Edición
    • Susan Wooldridge
    • Inglés
    Data Processing: Made Simple, Second Edition presents discussions of a number of trends and developments in the world of commercial data processing. The book covers the rapid growth of micro- and mini-computers for both home and office use; word processing and the 'automated office'; the advent of distributed data processing; and the continued growth of database-oriented systems. The text also discusses modern digital computers; fundamental computer concepts; information and data processing requirements of commercial organizations; and the historical perspective of the computer industry. The computer hardware and software and the development and implementation of a computer system are considered. The book tackles careers in data processing; the tasks carried out by the data processing department; and the way in which the data processing department fits in with the rest of the organization. The text concludes by examining some of the problems of running a data processing department, and by suggesting some possible solutions. Computer science students will find the book invaluable.

  • Worked Examples in Electrical Machines and Drives

    Applied Electricity and Electronics
    • 1 Edición
    • John Hindmarsh
    • P. Hammond
    • Inglés
    Worked Examples in Electrical Machines and Drives discusses methods in predicting and explaining electromechanical performance of several devices. The book is comprised of seven chapters that sequence the examples at increasing levels of difficulty. Chapter 1 provides an introduction and reviews the basic theories. The second chapter covers transformers, and the third chapter tackles d.c. machines. Chapter 4 is concerned with induction machines, while Chapter 5 deals with synchronous machines. Chapter 6 covers transient behavior, and Chapter 7 talks about power-electronic/ele... machine drives. The book will be of great use to students and instructors of schools concerned with electronic devices such as in electrical engineering, and can help enrich their lectures and practical classes.

  • Energy: Money, Materials and Engineering

    Institution of Chemical Engineers Symposium Series
    • 1 Edición
    • Sam Stuart
    • Inglés
    Energy: Money, Materials and Engineering focuses on the utilization and management of energy sources, taking into consideration the chemical processes and economic implications involved. Divided into eight parts with 47 chapters, the book features the literature of authors who have painstakingly conducted studies on the utilization, management, conversion, and the economics involved in the use of energy. These papers stress the contributions of chemical engineers and researchers in establishing the relationship of the development of energy sources, while at the same time minding their possible effects on the environment. In the conversion of energy, various processes are discussed. The book also touches the processes involved in the conservation of energy in various areas as well as in the industrial setting. Relative to this, various processes are discussed, including water electrolysis, the use of batteries in electricity supply system, coal gasification, and the use of turbines. The text also points out the evolution of hazardous materials because of the use of energy. The need to create programs to control their potential effects on the environment and health is stressed. The book is a valuable source of information for those involved in thermodynamics.

  • Reliability, Maintainability and Risk

    Practical Methods for Engineers
    • 4 Edición
    • David J Smith
    • Inglés
    Reliability, Maintainability and Risk: Practical Methods for Engineers, Fourth edition presents the techniques in the analysis and assessment of reliability, maintainability, safety, and risk factors in engineering design. The book contains chapters that are devoted to the discussion of reliability parameters and costs; the history of reliability and safety technology; cost-effective approaches to quality, reliability and safety; interpretation of failure rates; and prediction of reliability and risk. Risk assessment, design and assurance techniques, project management, and product liability are tackled as well. Industrial engineers, contract administrators, project managers, designers, and professionals responsible for the design and implementation of engineering projects will find the book invaluable.

  • Mass Transfer and Absorbers

    International Series of Monographs in Chemical Engineering
    • 1 Edición
    • T. Hobler
    • P. V. Danckwerts
    • Inglés
    Mass Transfer and Absorbers deals with absorption and mass transfer processes and the factors to consider in designing absorbers. Calculations are supported by a uniform, generalized process driving force, complying with Maxwell's equation, and the coefficients are made as independent as possible in terms of the kind of diffusion and of the values of the concentrations. This volume is comprised of seven chapters and begins with an overview of the general principles of diffusional mass transfer, absorption and stripping, and equilibrium between gas and liquid phases. Steady-state mass transfer by diffusion is then discussed, along with mass transfer in a single phase (forced flow and unforced flow). Subsequent chapters explore design considerations for mass transfer equipment and related problems; adsorption accompanied by a chemical reaction; and problems relating to hydrodynamics. The final chapter is devoted to some practical issues, including economic flow velocity and mechanical features of packed, plate, and spray tower designs. This book is intended for practicing designers and engineers.

  • Energy: A Global Outlook

    The Case for Effective International Co-operation
    • 1 Edición
    • Abdulhady Hassan Taher
    • Inglés
    Energy a Global Outlook: The Case for Effective International Co-Operation discusses the historical, current, and future issues related to the international oil industry and the global energy situation. The book is organized into three parts. Part I provides an economic and political evaluation, including topics such as the historical evolution of the international oil industry; global energy supply and demand balance; and impact of structural changes on the international energy industries. Part II analyses both historical and regional energy scenario, and Part III presents the statistical data. Readers concerned with the status of the global energy resource will find this book a great source of information regarding the matter.

  • Radio Frequency Transistors

    Principles and practical applications
    • 1 Edición
    • Helge Granberg
    • Norman Dye
    • Inglés
    Cellular telephones, satellite communications and radar systems are adding to the increasing demand for radio frequency circuit design principles. At the same time, several generations of digitally-oriented graduates are missing the essential RF skills. This book contains a wealth of valuable design information difficult to find elsewhere.

  • Fundamentals of Automation and Remote Control

    International Series of Monographs in Automation and Automatic Control
    • 1 Edición
    • S. A. Ginzburg + 2 más
    • Inglés
    International Series of Monographs in Automation and Automatic Control, Volume 7: Fundamentals of Automation and Remote Control describes the complex systems of automatic control and telecontrol. This text is a translation from the second Russian edition. This book contains descriptive material on the fundamentals of automation and remote control, with attention to electrical components and systems. Part I deals with the basic components of automation and remote control, such as functions and general characteristics, and electromechanical, ferromagnetic, and electronic and radioactive components. The construction of automation systems that use radioactive isotopes is given as an example where the penetrating power of the radioactive radiation can measure the thickness of an object. Part II discusses automation systems and describes the principles of stability analysis that are needed in the dynamics of automatic regulation and control, follower, and measuring systems. A schematic diagram of an automatic speed regulator is analyzed in detail as an example. Part III is a description of the many remote control systems that are used, for example, in signaling systems, in telemetry systems, and in command-link systems. The importance of communication channels to remote control systems is also pointed out. Long-range signaling and telecontrol, which uses selection methods to assign the correct signals, are explained. A diagram of a telecontrol unit with time separation of signals is illustrated, and the protection of the unit from employing distorted signals is explained. Mechanical engineers, technicians, and students with serious interest in automatic control and telecontrol will find this book valuable.

  • New Directions in Sorption Technology

    • 1 Edición
    • George E. Keller + 1 más
    • Inglés
    New Directions in Sorption Technology focuses on the developments in sorption technology, including sorbents, chromatography, pressure swing adsorption, and bioseparations involving sorption. The selection first offers information on coherence concept; an overview of coherence in the chromatographic movement of surfactant mixtures; and technological maturity of sorption processes and sorbents. The book then ponders on kinetic separation of air by pressure swing adsorption; conception of a new adsorption process for purifying landfill gas at the Kapiteltal Landfill Site in West Germany; and sizing of vacuum pumps for desorption in PSA systems. The manuscript takes a look at the evaluation of macroreticular resins as gas/vapor sorbents to rival active carbons and use of surfactant-enhanced carbon regeneration to remove volatile organics from spent activated carbon. Discussions focus on characterization of pores, development of porous polymers, cleaning, and resin preparation. The novel applications of continuous annular chromatography and chromatographic study of aqueous phase adsorption on activated carbon fiber with bacterial growth are also mentioned. The selection is a valuable source material for chemists and readers interested in sorption technology.

  • Transport and Distribution

    Made Simple
    • 1 Edición
    • Don Benson + 1 más
    • Inglés
    Transport and Distribution: Made Simple introduces the whole field of transport and physical distribution practiced in the 1970s. This book discusses the transport in the framework of production, components of a transport system, characteristics of different ways, and effect of traffic characteristics on terminals. The principles in the design of units of carriage, motive power at sea, and outline of the distribution process are also elaborated. This compilation likewise covers the documents for road haulage operations, development of the common transport policy, and control of rail transport. This text provides a wide range of examination syllabuses at an intermediate and higher level, covering the introductory syllabuses of the Chartered Institute of Transport and the Institute of Traffic Administration. This publication is ideal for H.N.C., H.N.D., and CNAA degree students majoring in transport option, as well as sociology students considering the impact of transport on the environment.

  • Innovation and Technology Transfer for the Growing Firm

    Text and Cases
    • 1 Edición
    • Julian Lowe + 1 más
    • Inglés
    Innovation and Technology Transfer for the Growing Firm: Text and Cases is a practical guide and commentary in the field of technology transfer with emphasis on the economic and managerial aspects of the subject. The book is concerned with both positive and normative aspects of licensing. The book is organized into three parts. Part I presents general definitions and discussion of factors impinging on the environment of licensing. Parts II and III deal with alternative licensing strategies, some empirical evidence, and a public policy approach that might be adopted by governments interested in using licensing to promote business development. The text will be useful to students and practitioners in this field of interest.

  • High Temperature Structures and Materials

    Proceedings of the Third Symposium on Naval Structural Mechanics Held at Columbia University, New York, N.Y., January 23–25, 1963
    • 1 Edición
    • A. M. Freudenthal + 2 más
    • Inglés
    High Temperature Structures and Materials is a compilation of the proceedings of the Third Symposium on Naval Structural Mechanics held at Columbia University in New York on January 23-25, 1963. The symposium provided a forum for discussing structural mechanics under conditions of elevated temperatures. Emphasis is placed on the various aspects of structural design for elevated temperature service. The following areas are covered: material aspects of elevated temperature design; effects of high-speed environment; thermal stress analysis; and design criteria and reliability. This book is comprised of 13 chapters and begins by assessing the temperature dependence of elastic and anelastic properties in solids, followed by a discussion on the thermo-mechanical behavior of ceramics. Subsequent chapters explore the physical aspects of creep; thermal fatigue and its relation to creep rupture and mechanical fatigue; materials aspects of the re-entry problem; and problems of heat conduction and melting. Thermal stresses in viscoelastic solids are also considered, along with creep design and aspects of reliability under conditions of elevated temperature creep and fatigue. This monograph will be a valuable resource for material physicists and mechanical and structural designers concerned with the problem of elevated temperature effects on the performance and safety of modern structures.

  • Hitchhikers' Guide to Electronics in the '90s

    • 1 Edición
    • David Manners
    • Inglés
    Hitchhikers Guide to Electronics in the ‘90s covers the advances in electronics in a historical context, the microchip technology, which is at the heart of all technological advances, and the major industrial electronics power houses. The book tackles what’s most interesting about electronics, such as the democratizing effects of technology, profits in electronics, and the importance of electronics, and then defines terminologies related to the componentry of the electronics industry. The text discusses the beneficiaries of electronics and the sectors of the electronics industry (i.e. computers, consumers, telecommunications, industrial, transportation, and military). The issues in chip technology including the importance of chips; vast cost of chip research and development and production; effect of erratic chip supplies on equipment companies; East/West imbalance in chip production; and the American and Japanese approaches to chip-making are also considered. The book concludes by describing the trends in electronics for the ‘90s, including the innovation, development, and rock-bottom cost of the technology. Students of electronics engineering and practicing electronics engineers will find this book useful.

  • Selection and Use of Engineering Materials

    • 2 Edición
    • J A Charles + 1 más
    • Inglés
    Selection and Use of Engineering Materials, Second Edition covers the substantial development in the selection and application of materials and of associated materials. This book is organized into four parts encompassing 20 chapters that also consider the advances in materials databases and computer programs. The first part deals with the motivation, cost basis, service requirements, failure analysis, specifications, and quality control of engineering materials. The second part describes the mechanical properties of these materials, including static strength, toughness, stiffness, fatigue, creep, and temperature resistance. The third part examines the selection requirements for surface durability, such as corrosion and wear resistance. This part also explores the relationship between materials selection and materials processing, as well as the formalization of selection procedures. The fourth part provides some case studies in materials selection. This book will prove useful to materials scientists and practicing engineers.

  • An Introduction to Gas Discharges

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 2 Edición
    • A. M. Howatson
    • Inglés
    An Introduction to Gas Discharges: Second Edition aims to provide a compact introduction to the subject of gas discharges, which continues to make both scientific and industrial progress. In this second edition, the author has made minor corrections, rewritten and expanded some sections, used SI units and modernized notions, in hopes of making the book more up to date. Included in the book is a short history of the subject, an introduction that enumerates the types of gas discharges, the fundamental processes, and then moves on to the more specific areas such as the breakdown, the self-sustaining discharge, equilibrium, plasma properties and measurements, and the technological applications of gas discharges. Concise and easy to understand, the text is for students and researchers who wish to learn the subject and prepare them for more advanced readings.

  • Statistics for the Teacher

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 2 Edición
    • Douglas M. McIntosh
    • Inglés
    Statistics for the Teacher, Second Edition serves as a guide to understand the significance and legitimate use of examination marks. This book examines the application of elementary statistics to examination marks involving only arithmetic. Organized into 10 chapters, this edition starts with an overview of the essential differences between counting and measuring in education. This text then explains the three factors that may be taken into consideration in interpreting the distribution of marks, including the nature of the examination, the type of group sitting the examination, and the marking scheme. Other chapters consider the most convenient measure of the standard of attainment or of the standard of marking, which is the average or arithmetic mean. This book discusses as well the method of obtaining a more accurate measure of the scatter. The final chapter deals with the method of determining the mean or average. Teachers will find this book useful.

  • Basic Heat Transfer

    • 1 Edición
    • D. H. Bacon
    • Inglés
    Basic Heat Transfer aims to help readers use a computer to solve heat transfer problems and to promote greater understanding by changing data values and observing the effects, which are necessary in design and optimization calculations. The book is concerned with applications including insulation and heating in buildings and pipes, temperature distributions in solids for steady state and transient conditions, the determination of surface heat transfer coefficients for convection in various situations, radiation heat transfer in grey body problems, the use of finned surfaces, and simple heat exchanger design calculations. The text also includes a review of the BASIC computing required and some mathematical programs to solve heat transfer problems. The book will be useful to mechanical engineers, students of engineering, and designers.

  • Engineering Materials 2

    • 1 Edición
    • William Bolton
    • Inglés
    Engineering Materials 2 covers an introduction to the properties and structures of engineering materials. The book discusses the types of factors determining the choice of a material; the main properties required of engineering materials; the main methods used for tensile testing, impact testing, bend tests, and hardness measurements and the interpretation of measurements; and the interpretation of thermal conductivity and electrical conductivity data. The text also describes the basic structure of materials; the effect of hot and cold work on a metal structure; and the effect of grain size and shape on the mechanical properties of metals. The basic structural features of thermoplastic, thermosetting, and elastomer materials, relating the mechanical and thermal properties to the structures, and the properties of common plastics, relating the properties to their structures, are also described. The book tackles the main categories of polymer forming and their products; the mechanical properties of composites and the properties of the matrix and fiber; and the environmental stability of materials. Engineering students and technicians will find the book invaluable.

  • Total Energy

    International Series in Heating, Ventilation and Refrigeration
    • 1 Edición
    • R. M. E. Diamant
    • N. S. Billington + 1 más
    • Inglés
    Total Energy discusses the process of generating power where it is wanted and to use the waste heat for useful purposes. The book is comprised of 12 chapters that provide a comprehensive discussion of the various aspects of total energy. The text first introduces the concept of total energy, and then proceeds to detailing the principal prime movers used in total energy production. The next chapters cover steam turbines and governors systems for industrial steam turbo-alternators. Next, the book talks about open- and closed-cycle gas turbines. The next three chapters tackle fuel cell, refrigeration and district heating. Chapter 11 examines the existing total energy schemes in North America, while Chapter 12 presents an economic assessment of total energy. The book will be of great interest to researchers and professionals in the energy industry.

  • Theory of Random Functions

    And Its Application to Control Problems
    • 1 Edición
    • V. S. Pugachev
    • Inglés
    Theory of Random Functions and Its Application to Control Problems presents insights into a branch of probability theory, the theory of random functions, which studies and takes into account the effects of random factors on the functioning of control systems. The book does not require a high level of competency in the use of mathematical techniques and explains the basics of probability theory before focusing on the concepts of the theory of random functions. The selection also discusses in great detail the aspects of random functions and provides chapters that cover the determination and solution to problems of optimal systems. The text will be of value to telecommunications engineers, aeronautical engineers, meteorologists, seismologists, and other professionals engaged in applied sciences.

  • Operational Gaming

    An International Approach
    • 1 Edición
    • Ingolf Ståhl
    • Inglés
    Operational Gaming: An International Approach focuses on various research on this method of systems analysis. The text points out the value of this method in decision making, planning, and in the implementation of policies. The book presents a survey that highlights the connection of experimental gaming, game theory, and operational gaming. The value of gaming as a balancing method in assessing multifaceted computer models, most notably about their assumptions on human behavior, is noted. The book also offers an overview of gaming in other countries, such as Bulgaria, Soviet Union, and Japan, and discusses the international transfer of games, taking into consideration the variance in the transfer processes in every economic system. Some of those identified as affecting the international transfer of games include currencies, tax regulations, and institutional differences. The text also highlights the value of operational gaming, the promotion of its use, and how international cooperation is valuable in its advancement. The book can serve as a reference for those involved in decision making and implementation of policies.

  • Electrical Machines & Drives

    • 4 Edición
    • Volumen 2
    • P. Hammond
    • Inglés
    Containing approximately 200 problems (100 worked), the text covers a wide range of topics concerning electrical machines, placing particular emphasis upon electrical-machine drive applications. The theory is concisely reviewed and focuses on features common to all machine types. The problems are arranged in order of increasing levels of complexity and discussions of the solutions are included where appropriate to illustrate the engineering implications. This second edition includes an important new chapter on mathematical and computer simulation of machine systems and revised discussions of unbalanced operation, permanent-magnet machines and universal motors. New worked examples and tutorial problems have also been added.

  • Techniques of Teaching

    Primary Education
    • 1 Edición
    • A. D. C. Peterson
    • Inglés
    Techniques of Teaching, Volume One: Primary Education presents a detailed account of what happens in areas of education outside the range of personal experiences of teachers. This book aims to help the student in training to understand the training method in a wide variety of subjects. Comprised of four chapters, this volume starts with an overview of the various aspects of children's growth. This book then describes the factors in the development of the social well-being of children or infants of school age. Other chapters examine the concentration upon mathematical principles and integration of arithmetic into the mathematical curriculum, which has resulted in a significant reduction in the amount of time spent on complicated computations and drill work. This book discusses as well the importance of problem-solving method in the teaching situation. The final chapter deals with the objective of teaching art and craft in the child's development. This book is a valuable resource for teachers.

  • Generation, Compilation, Evaluation and Dissemination of Data for Science and Technology

    The Proceedings of the Fourth International CODATA Conference
    • 1 Edición
    • Bertrand Dreyfus
    • Inglés
    Generation, Compilation, Evaluation and Dissemination of Data for Science and Technology is a compilation of manuscripts presented at the four proceedings organized by the Committee on Data for Science and Technology (CODATA). It focuses on the functions of CODATA, a data center that operates by generating, compiling and evaluating data. This book discusses conventional areas of CODATA activity, namely the fields of physics, chemistry and allied subjects, the biological sciences, geology, geophysics, geography, and astronomy. It includes lectures from the first two sessions, giving up-to-date reviews on data centers, particularly the use of computers in a variety of data activities. The book also deals with CODATA's original areas of interest: spectroscopic and thermodynamic data. Information scientists interested in documentation systems will find this book indispensable.

  • Aircraft Dynamic Stability and Response

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • A. W. Babister
    • Inglés
    Aircraft Dynamic Stability and Response deals with the fundamentals of dynamic stability in aircraft. Topics covered include flight dynamics, equations of motion, and lateral and longitudinal aerodynamic derivatives. Basic lateral and longitudinal motions are also considered. A non-dimensional system of notation is used, and problems are included at the end of chapters. This book is comprised of 13 chapters and begins with an introduction to aircraft static stability and maneuverability, with emphasis on the theoretical basis of flight dynamics and the technical terms used. The physical background for the estimation of aerodynamic derivatives is discussed. Subsequent chapters focus on the longitudinal and lateral motion of aircraft, including the effect of automatic control; modern developments such as the effects of aeroelasticity, dynamic coupling, and high incidence; and aircraft response to gusts. The final chapter demonstrates how to estimate the aerodynamic derivatives, and hence the dynamic stability characteristics, of a typical fighter aircraft. Throughout the text, the aircraft and its behavior are kept well to the fore. This monograph is intended for undergraduate students of aeronautical engineering and for newcomers to the aircraft industry.

  • Fast Breeder Reactors

    An Engineering Introduction
    • 1 Edición
    • A. M. Judd
    • Inglés
    Fast Breeder Reactors: An Engineering Introduction is an introductory text to fast breeder reactors and covers topics ranging from reactor physics and design to engineering and safety considerations. Reactor fuels, coolant circuits, steam plants, and control systems are also discussed. This book is comprised of five chapters and opens with a brief summary of the history of fast reactors, with emphasis on international and the prospect of making accessible enormous reserves of energy. The next chapter deals with the physics of fast reactors and considers calculation methods, flux distribution, breeding, control rods, shielding, and reactivity coefficients. The chemistry of fast reactor fuels is also considered, along with the engineering of the core of a power-producing fast reactor and of coolant circuits and steam plants. The final chapter examines aspects of reactor safety that are peculiar to sodium-cooled oxide-fueled fast reactors and describes the inherent features of such a reactor that make for safety, followed by an analysis of risks and some of the protective systems that can be used. This monograph will be of interest to nuclear scientists, physicists, and engineers.

  • Automated Structural Analysis

    An Introduction
    • 1 Edición
    • William R. Spillers
    • Thomas F. Irvine + 2 más
    • Inglés
    Automated Structural Analysis: An Introduction is a ten-chapter book that first discusses the ideas or laws fundamental to structures. Subsequent chapters describe the node method; node method for trusses, plane frames, and space frames; and the primitive stiffness matrix. The mesh method and Kron's methods are also reported. This book will be useful for undergraduates involved in structural analysis.

  • Basic Reliability Engineering Analysis

    Butterworths Basic Series
    • 1 Edición
    • R. D. Leitch
    • Inglés
    BASIC Reliability Engineering Analysis describes reliability activities as they occur during an industrial development cycle. Reliability as a function of time is discussed, along with systems modeling, predicting and estimating reliability, and quality assurance. This book is comprised of seven chapters and begins with a brief introduction to the BASIC computer language used in the programs in the text. The second chapter describes the way reliability is taken into account in different parts of the development cycle, while the third chapter discusses the basic concepts of reliability as a function of time, failure rate, and some basic statistical concepts. The fourth chapter deals with the modeling of complex systems and related topics such as availability and maintainability. The fifth chapter describes the activities that can go on early in the development cycle, while the sixth chapter gives some of the techniques that can be used to analyze data generated during development or later in the cycle when equipment is in use. The final chapter offers a brief look at quality assurance and acquaints the reader with the concepts involved, using inspection by attributes to introduce the ideas. This monograph is intended for engineers or managers with a particular interest in reliability, as well as for engineering undergraduates.

  • Physical Principles of Chemical Engineering

    International Series of Monographs in Chemical Engineering
    • 1 Edición
    • Peter Grassmann
    • H. Sawistowski
    • Inglés
    Physical Principles of Chemical Engineering covers the significant advancements in the understanding of the physical principles of chemical engineering. This book is composed of 12 chapters that describe chemical unit processes through analogy with the unit of operations of chemical engineering. The introductory chapters survey the concept and principles of mass and energy balances, as well as the application of entropy. The next chapters deal with the probability and kinetic theories of gases, the physical aspects of solids, the different dispersed systems, and the principles and application of fluid dynamics. Other chapters discuss the property dimension and model theory; heat, mass, and momentum transfer; and the characteristics of multiphase flow processes. The final chapters review the model of rheological bodies, the molecular-kinetic interpretations of rheological behavior, and the principles of reaction kinetics. This book will prove useful to chemical engineers.

  • Proceedings of the Seventh New England (Northeast) Bioengineering Conference

    • 1 Edición
    • Lee E. Ostrander
    • Inglés

  • DC Motors, Speed Controls, Servo Systems

    An Engineering Handbook
    • 3 Edición
    • Sam Stuart
    • Inglés
    DC Motors - Speed Controls - Servo Systems: An Engineering Handbook is a seven-chapter text that covers the basic concept, principles, and applications of DC and speed motors and servo systems. After providing the terminology, symbols, and systems of units, this book goes on dealing with the basic theory, motor comparison, and basic speed control methods of motors. The subsequent chapters describe the phase-locked servo systems and their optimization and applications. These topics are followed by a discussion of the developments made by Electro-Craft in the field of DC Brushless Motors. The final chapter provides revised data sheets on Electro-Craft products and describes the models in the motomatic range of speed controls, servomotor controls, and digital positioning systems. This handbook is of great value to professional engineers and engineering students.

Temas relacionados