Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Electrical Installation Technology

    • 3 Edición
    • Michael Neidle
    • Inglés
    Electrical Installation Technology, Third Edition covers the wide range of subjects that come under the headings of electrical science, installations, and regulations. The book discusses electromagnetism; inductance; static electricity; d.c. circuits; voltage drop and current rating; distribution; and wiring techniques. The text also describes o.c. motors and generators; a.c. motors, transformers; power-factor improvement; earthing and earth-leakage protection; testing; illumination; and the general principles of temperature and heat. Communication systems and equipment; electronics; and site and office management of electrical installation business are also considered. Students taking the electrical installation technicians, electrical technicians, and electrical engineering courses will find the book useful.

  • Electronics for Technicians

    The Commonwealth and International Library: Electrical Engineering Division
    • 1 Edición
    • P. W. Crane
    • N. Hiller
    • Inglés
    Electronics for Technicians covers the basic fundamentals of electronics, including the operation of devices and circuits. The book is meant to help the technician to obtain numerical answers to actual circuit problems. This volume consists of seven chapters, the first of which introduces the reader to the basic rules for circuits containing resistive and reactive elements. Charge and discharge of a capacitor through a resistor is discussed, along with charge and discharge of an inductance through a resistance, application of sinusoidal voltages to simple networks, and series and parallel LCR circuits. The chapters that follow focus on the simple construction and operation of vacuum and semiconductor rectifier devices capable of amplifying alternating signals, uses of transistors and valves in amplifier circuits, and power supplies. Negative and positive feedback is also considered, with particular emphasis on circuit descriptions of the more common oscillator types that produce or do not produce sinusoidal waves. The book concludes with a chapter on laboratory test equipment such as cathode-ray oscilloscopes, alternating current electronic voltmeters, low-frequency signal generators, and Q-meters. This book is written specifically for technicians in the electrical engineering industry.

  • Optoelectronics Circuits Manual

    • 1 Edición
    • R. M. Marston
    • Inglés
    Optoelectronics Circuits Manual covers the basic principles and characteristics of the best known types of optoelectronic devices, as well as the practical applications of many of these optoelectronic devices. The book describes LED display circuits and LED dot- and bar-graph circuits and discusses the applications of seven-segment displays, light-sensitive devices, optocouplers, and a variety of brightness control techniques. The text also tackles infrared light-beam alarms and multichannel remote control systems. The book provides practical user information and circuitry and illustrations. Practical design engineers, technicians, and experimenters, as well as the electronics student and amateur will find the book invaluable.

  • Collection of Problems in Physical Chemistry

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • Jiří Bareš + 2 más
    • Inglés
    Collection of Problems in Physical Chemistry provides illustrations and problems covering the field of physical chemistry. The material has been arranged into illustrations that are solved and supplemented by problems, thus enabling readers to determine the extent to which they have mastered each subject. Most of the illustrations and problems were taken from original papers, to which reference is made. The English edition of this book has been translated from the manuscript of the 2nd Czech edition. It has been changed slightly in some places and enlarged on in others on the basis of further experience gained in teaching physical chemistry at the Institute of Chemical Technology in Prague. The book begins with illustrations and problems on the atomic structure and the fundamentals of quantum mechanics. Subsequent chapters cover the kinetic theory of ideal gas; fundamentals of thermodynamics; states of matter; phase equilibrium; chemical equilibrium and third law of thermodynamics; electrochemistry; reaction kinetics; surface phenomena and colloidal systems; and molecular structure and physical properties.

  • Analysis of Engineering Cycles

    Thermodynamics and Fluid Mechanics Series
    • 3 Edición
    • R. W. Haywood
    • W. A. Woods
    • Inglés
    Analysis of Engineering Cycles, Third Edition, deals principally with an analysis of the overall performance, under design conditions, of work-producing power plants and work-absorbing refrigerating and gas-liquefaction plants, most of which are either cyclic or closely related thereto. The book is organized into two parts, dealing first with simple power and refrigerating plants and then moving on to more complex plants. The principal modifications in this Third Edition arise from the updating and expansion of material on nuclear plants and on combined and binary plants. In view of increased importance and topicality, new material has been added to chapters on gas-turbine plant for compressed air energy storage systems and on steam-turbine plant for the combined supply of power and process steam, including plant for district heating. The use of gas-turbine plant in association with district-heating schemes is also discussed, in which the treatment of high-temperature and fast-breeder gas-cooled nuclear reactors has been extended. The material on combined gas-turbine/steam-tu... plant has also been expanded and updated, together with that on combined steam plant with magnetohydrodynamic and thermionic topping, respectively. This book meets the immediate requirements of the mechanical engineering student in his undergraduate course, and of other engineering students taking courses in thermodynamics and fluid mechanics.

  • Audio IC Projects

    A Collection of Useful Circuits Based on Readily Available Chips
    • 1 Edición
    • Keith Brindley
    • Inglés
    Each of the projects in this collection of data files provides a 'building block' which constructors can use to experiment with components and use as a starting point for further development. This book will thus provide a toolkit for building audio systems and circuits based on readily available components using straightforward techniques.Maplin staff are experienced providers of project ideas with useful features and many applications. Each of the circuits in this book are based around readily available chips, and provide an excellent way to become familiar with the characteristics of the chip as well as providing construction details for useful projects. Each includes pinouts and pin designations, output waveforms, parts lists, circuit diagrams, PCB layouts and photographs of the boards. The projects described in this book are based on those appearing in the popular Data Files feature in Electronics, the Maplin Magazine.

  • Process Plant Design

    Heinemann Chemical Engineering Series
    • 1 Edición
    • J R Backhurst + 1 más
    • Inglés
    Process Plant Design provides an introduction to the basic principles of plant design and shows how the fundamentals of design can be blended with commercial aspects to produce a final specification; how textbook parameters can be applied to the solution of real problems; and how training in chemical engineering can best be utilized in the industrial sphere. It has been assumed that the reader knows how to calculate a heat transfer coefficient and the height of an absorber, for example, and the bulk of the book is concerned with the translation of such parameters into plant items which are ultimately linked into the production unit. The book follows a fairly logical sequence in which flowsheets, heat and mass balances, for example, are considered before attention is paid to the design of plant items, exchangers, columns, and so on. Because of the vital role of economics in any design function, costing is dealt with early in the book and the principles further developed as appropriate. Rarely is the plant designer concerned with the design of smaller and standard items of equipment, and hence considerable emphasis is placed on the selection of such items. This section may prove of particular value to the engineer in industry, especially if he has not the backing of comprehensive technical manuals produced by the larger companies. Finally, an attempt is made to draw together the many facets of equipment design into one specification for the complete plant, and the many aspects relating to the completed unit are introduced in a final section.

  • Liver Cell Cancer

    • 1 Edición
    • H.M. Cameron + 2 más
    • Inglés
    Liver Cell Cancer focuses on liver cell cancer, which is considered one of the most aggressive malignant tumors, and in turn, one of the most intensively studied tumors in man and experimental animals. This book discusses the geographic pathology, alpha-fetoprotein, diagnosis, treatment, and background of liver cell cancer. The clinical problem of liver cell cancer in a high incidence area; primary hepatocellular carcinoma; induction of liver cell cancer by chemicals; cell proliferation and experimental liver cancer; and immunology and pathology of experimental liver cell cancer are also discussed in the chapters. This book aims to provide a ready reference for clinicians for research, present a clear and unambiguous picture to research workers of the problems inherent in the clinical situation, and introduce a reasoned assessment of the findings, both clinical and experimental.

  • A Short Course in Foundation Engineering

    • 1 Edición
    • N.E. Simons + 1 más
    • Inglés
    A Short Course in Foundation Engineering discusses methods for predicting the failure loads, and the deformations at working loads, of piled and non-piled foundations. The first chapter covers the definition, principle, and computation of effective stress. Chapter 2 discusses the nature and measurement of shear stress. Chapter 3 deals with the concerns in immediate settlements, such as elastic stress distributions, heave of excavations, and estimates of undrained modulus. Chapter 4 tackles the bearing capacity of footings, while Chapter 5 talks about settlement analysis. The last chapter covers piled foundations. The book will be of great use to civil engineers who wish to have a better understanding of foundation engineering.

  • Physicochemical Hydrodynamics

    An Introduction
    • 1 Edición
    • Ronald F. Probstein
    • Howard Brenner
    • Inglés
    Physicochemical Hydrodynamics: An Introduction aims to provide an introduction to physicochemical hydrodynamics (PCH), which deals with the interaction between fluid flow and physical, chemical, and biochemical processes. PCH has applications in many areas of science and technology and is a rapidly expanding field. Emphasis of this book is on rational theory and its consequences, with the purpose of showing the underlying unity of PCH, in which diverse phenomena can be described in physically and mathematically similar ways. The magic of this unity is shown in the similar manner in which solutes concentrate in a flow containing chemically reacting surfaces, reverse osmosis membranes, and electrodialysis membranes or the similarity of particle motions in sedimentation, centrifugation, ultrafiltration, and electrophoresis. Problems are included at the end of each chapter and are ordered following the sequence in which the material is set out. The questions range in difficulty, with most requiring an analytic development, but with some asking only for a descriptive answer. All problems are intended to illustrate the ideas presented, though often the solution goes beyond the explicit discussion in the book, with the answer constituting a generalization or extension of the text material. This book is an essential source of information for students majoring in the field of PCH.

  • Introduction to Hydrometeorology

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • J. P. Bruce + 1 más
    • Inglés
    Introduction to Hydrometeorology is the study of the hydrolic cycle, which is the circulation of water from the seas, into the atmosphere, and back to either land or sea. This book describes hydrometeorology or the application of meteorology to problems that pertain to hydrology, and then discusses the approach, through meteorology, to the solution of hydrologic problems. This text outlines observation methods on the subject and discusses the applications of hydrometeorology to problems encountered in the study of river and lake behaviors. Topics include precipitation, melting of ice, streamflows, lakes, evaporation, and evapotranspiration. The frequently used methods in analysis, such as employing statistics to hydrometereological problems, precipitation analysis, and streamflow routing are explained. This text also shows how extending streamflow records can be helpful in predicting the regime or course of a stream in the future. Records of seasonal and annual flow, flood runoff, peak discharge, as well as seasons of low flow and drought become useful tools in estimating the frequency and magnitude of streamflows. After which, the book discusses possible engineering designs in irrigation, storm sewers, and reservoirs. The text looks into the ways how human has influenced the hydrologic cycle through induced precipitation, melting of ice covers, and urbanization. Lastly, some climactic trends and cycles that bring about climate change and water resource development are discussed. This text can be used by students studying hydrology and those with meteorology majors. This book can also be read by meteorologists, environmentalists, and people working in general earth sciences.

  • Structural Concrete

    Materials; Mix Design; Plain, Reinforced and Prestressed Concrete; Design Tables
    • 1 Edición
    • C. B. Wilby
    • Inglés
    Structural Concrete discusses the design and analysis of reinforced and prestressed concrete structural components and structures. Each of the eight chapters of the book tackles a specific area of concern in structural concrete. The text first deals with the serviceability and safety, and then proceeds to the properties of materials and mix designs. The next two chapters cover reinforced concrete beams and slabs. Chapter 5 discusses column and walls, while Chapter 6 tackles reinforced concrete frames and continuous beams and slabs. The next chapter discusses design structures, while the last chapter covers prestressed concrete. The text will be of great use to undergraduate students of civil and structural engineering. Professionals whose work involves concrete technology will also find the book useful.

  • Plasticity

    Proceedings of the Second Symposium on Naval Structural Mechanics
    • 1 Edición
    • E. H. Lee + 1 más
    • Inglés
    Plasticity documents the proceedings of the Second Symposium on Naval Structural Mechanics held at Brown University, Rhode Island, 5-7 April 1960. It was sponsored jointly by the Office of Naval Research of the U.S. Navy and Brown University. The symposium was devoted to plasticity. The intention was to provide critical reviews of recent developments in certain areas of plasticity of particular current interest and importance, and to supplement these with short accounts of related current research work. The papers presented at the symposium covered the following areas: atomic theory of plastic flow and fracture; stress-strain relations including thermoplasticity and creep; basic theory including stability and uniqueness; boundary value problems including plates and shells; dynamic loading and plastic waves; and developments in design. Two talks were also held for the purpose of reviewing the present status of application of plasticity in design of naval vessels. The symposium was opened by Captain J. C. Myers on behalf of the Office of Naval Research and by Professor W. Prager on behalf of Brown University. Professor Prager closed the symposium by presenting a brief resume of the main accomplishments and trends in plasticity brought to light during the symposium.

  • Turbine Main Engines

    The Commonwealth and International Library: Marine Engineering Division
    • 1 Edición
    • John B. Main + 2 más
    • A. J. S. Bennett
    • Inglés
    Turbine Main Engines deals with the principle of operation of turbine main engines. Topics covered include practical considerations that affect turbine design and efficiency; steam turbine rotors, blades, nozzles, and diaphragms; lubricating oil systems; and gas turbines for use with nuclear reactors. Gas turbines for naval boost propulsion, merchant ship propulsion, and naval main propulsion are also considered. This book is divided into three parts and begins with an overview of the basic mode of operation of the steam turbine engine and how it converts the pressure energy of the ingoing steam into equivalent kinetic energy. The second part deals with the principle of operation of marine gas turbines and discusses the effect of pressure and temperature on turbine performance; creep of turbine components; fouling of compressors and turbines; and control systems and protective devices. The final part describes free piston-gas turbine machinery and looks at different types of free piston engine, together with turbine fouling and washing procedure. This monograph will be of interest to mechanical engineers and those involved in turbine operation and design.

  • The Newnes Guide to Home Electrics

    • 2 Edición
    • Geoffrey Burdett
    • W. Turner
    • Inglés
    Home Electrics, Second Edition provides a do-it-yourself (DIY) guide to residential electric systems. The book is comprised of 15 chapters that cover the different aspects of home electrics. The topics covered in the text include electrical installation, rewiring, power circuits, electrical hardware, electrical repairs, tools, and safety. The book also discusses a specific area or function of home electronics, such as lighting system, lamps, electric cookers, and outdoor electrical extension. The book will be of great use to individuals interested in learning how to conduct proper home electrical installation and maintenance.

  • Engineering Surveying

    Theory and Examination Problems for Students
    • 3 Edición
    • W. Schofield
    • Inglés
    Engineering Surveying: Theory and Examination Problems for Students, Volume 1, Third Edition discusses topics concerning engineering surveying techniques and instrumentations. The book is comprised of eight chapters that cover several concerns in engineering survey. Chapter 1 discusses the basic concepts of surveying. Chapter 2 deals with simple and precise leveling, while Chapter 3 covers earthworks. The book also talks about the theodolite and its applications, and then discusses optical distance measurement. Curves, underground and hydrographic surveying, and aspects of dimensional control on site are also examined. The text will be useful to both students and practitioners of civil engineering.

  • Modest Technologies for a Complicated World

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • Roberto Vacca
    • Inglés
    Modest Technologies for a Complicated World focuses on intermediate or alternative technologies capable of making our complex society more rational, simpler, and more modest through the attainment of equilibrium in the socio-political situation and also in the demographic, energy, agricultural, soil preservation, exploitation of resources, and recycling processes. This book outlines the conditions that must be satisfied and the precautions that have to be taken in order to implement modest technological innovations in the third world—as well as in the first or the second—on the basis of concrete and pragmatic evaluations. This volume is comprised of 14 chapters and begins with a historical overview of modest technology and how it can address global problems such as food shortage and malnutrition. The role of modest technologies as instruments of international aid and in promoting a possible New International Economic Order is then discussed. The following chapters consider the debate concerning the neutrality of science and technology; lack of innovation as a cause of economic crisis; and arguments about the theory and practice of international activities of technological cooperation and assistance. Strategies for the introduction of modest technologies are also proposed. This book will be of interest to sociologists, economists, and decision makers.

  • Fluid Mechanics

    Volume 6
    • 1 Edición
    • L D Landau + 1 más
    • Inglés
    Course of Theoretical Physics, Volume 6: Fluid Mechanics discusses several areas of concerns regarding fluid mechanics. The book provides a discussion on the phenomenon in fluid mechanics and their intercorrelations, such as heat transfer, diffusion in fluids, acoustics, theory of combustion, dynamics of superfluids, and relativistic fluid dynamics. The text will be of great interest to researchers whose work involves or concerns fluid mechanics.

  • Environmental Engineering

    • 2 Edición
    • P Aarne Vesilind + 2 más
    • Inglés
    Environmental Engineering, Second Edition is an introductory book on environmental engineering, which includes materials important to environmental engineers: water resources, air quality, solid and hazardous wastes (including radioactive waste), noise, and social and ethical considerations. The text begins with a short introduction on the roots of environmental engineering and presents the concept of risk and safety. The following chapters are devoted to discussions on such topics as sources of water pollution, measurement of water quality, wastewater treatment, quantities and characteristics of municipal solid waste, and solid and hazardous waste law. The types of air pollutants, air pollution control, and noise measurement and control are dealt with in detail as well. The last chapter covers the topic on environmental ethics. This book will be of use to junior or senior level engineering students.

  • Engineering Electromagnetics

    Pergamon Unified Engineering Series
    • 1 Edición
    • David T. Thomas
    • Thomas F. Irvine + 2 más
    • Inglés
    Engineering Electromagnetics presents a bold approach to the teaching of electromagnetics to the electrical engineering undergraduate. This book begins by adopting Maxwell's Equations as the fundamental laws, an approach contrary to the traditional presentation of physical laws in the chronological order of their discovery that starts with Coulomb's Law. The use of Maxwell's Equations provides broad physical laws of general applicability and prevents confusion among students as to when specific laws may be applied. A problem solving or engineering analysis approach is used extensively throughout this text. Real life problems are presented and then reduced to an appropriate model or facsimile for solution. This publication is intended for engineering students at junior or senior level.

  • Engineering

    Its Role and Function in Human Society
    • 1 Edición
    • William H. Davenport + 1 más
    • Inglés
    Engineering: Its Role and Function in Human Society illustrates the historical views held by humanists and technologists with regard to each other, the accomplishments of engineering in the past, and the problems involving laymen and men of science together in their relationships. Some of the topics covered are the aloofness from science and technology; hostility to technology; and acceptance of technology. The book also covers topics on the attitudes of the engineer; the use of engineering in relation to human needs; and engineering as a technological culture. The ultimate use of tools and machines; automation and human condition; pollution and pollutants; and causes of problems in engineering are also encompassed. Engineers and engineering students will find the book invaluable.

  • Handbook of Dehumidification Technology

    • 1 Edición
    • G.W. Brundrett
    • Inglés
    Handbook of Dehumidification Technology is a handbook of dehumidifiers and how they work. This manual describes the principles of dehumidification and looks at the domestic and industrial applications of dehumidifiers, along with design considerations for refrigerant dehumidifiers. The use of dehumidification in swimming pools and for food and flower storage is also discussed. This reference guide is comprised of 11 chapters and begins with an introduction to dehumidification, paying particular attention to how it addresses the problems created by high water vapor content in air. The historical development of air drying and the use of psychrometric charts to describe the state of damp air as well as to illustrate ways of lowering the relative humidity of moist air are also considered. The next chapter presents three methods of removing moisture from air: sorbent dehumidification, refrigerant dehumidification, and air-cycle dehumidification. The reader is also introduced to design considerations for refrigerant dehumidifiers, domestic applications of dehumidifiers, installation of dehumidifiers in a swimming pool, and industrial dehumidification. The final chapter is devoted to additional sources of information on dehumidifiers and dehumidification, including journals, professional bodies, and research. This monograph will be a valuable resource for technicians and others interested in humidity control.

  • Fundamentals of Fluidized-Bed Chemical Processes

    Butterworths Monographs in Chemical Engineering
    • 1 Edición
    • J G Yates
    • J W Mullin
    • Inglés
    Fundamentals of Fluidized-bed Chemical Processes presents a survey of the design, operation, and chemical processes of fluidized-bed reactors. The book is composed of five chapters. The first chapter examines the basic physics of gas-solid fluidization. The second chapter shows how the physics of gas-solid fluidization may be combined with chemical kinetics to generate models of fluidized-bed reactors. Chapters 3 and 4 deal with two major applications of gas-solid fluidization, the Fluidized Catalytic Cracking process and the combustion and gasification of coal. The final chapter analyzes other processes used in the production of chemicals such as phthalic anhydride, acrylonitrile, and compounds of uranium. Undergraduate and postgraduate students of chemical engineering, engineers, chemists, and scientists will find this text useful.

  • Principles of Transistor Circuits

    Introduction to the Design of Amplifiers, Receivers and Digital Circuits
    • 8 Edición
    • S W Amos + 1 más
    • Inglés
    For over thirty years, Stan Amos has provided students and practitioners with a text they could rely on to keep them at the forefront of transistor circuit design. This seminal work has now been presented in a clear new format and completely updated to include the latest equipment such as laser diodes, Trapatt diodes, optocouplers and GaAs transistors, and the most recent line output stages and switch-mode power supplies. Although integrated circuits have widespread application, the role of discrete transistors is undiminished, both as important building blocks which students must understand and as practical solutions to design problems, especially where appreciable power output or high voltage is required. New circuit techniques covered for the first time in this edition include current-dumping amplifiers, bridge output stages, dielectric resonator oscillators, crowbar protection circuits, thyristor field timebases, low-noise blocks and SHF amplifiers in satellite receivers, video clamps, picture enhancement circuits, motor drive circuits in video recorders and camcorders, and UHF modulators. The plan of the book remains the same: semiconductor physics is introduced, followed by details of the design of transistors, amplifiers, receivers, oscillators and generators. Appendices provide information on transistor manufacture and parameters, and a new appendix on transistor letter symbols has been included.

  • Semiconductor Opto-Electronics

    • 1 Edición
    • T.S. Moss + 2 más
    • Inglés
    Semiconductor Opto-Electronics focuses on opto-electronics, covering the basic physical phenomena and device behavior that arise from the interaction between electromagnetic radiation and electrons in a solid. The first nine chapters of this book are devoted to theoretical topics, discussing the interaction of electromagnetic waves with solids, dispersion theory and absorption processes, magneto-optical effects, and non-linear phenomena. Theories of photo-effects and photo-detectors are treated in detail, including the theories of radiation generation and the behavior of semiconductor lasers and lamps. The rest of this text deals with the group IV elements, III-V compounds, and selection of the most important chalcogenides. This publication is intended primarily for physicists engaged in academic research or commercial device development and for honors students specializing in solid-state physics.

  • CIM – Mechanical Aspects

    State of the Art Report
    • 1 Edición
    • Gareth Evans
    • Inglés
    CIM - Mechanical Aspects: State of the Art Report contains different points of view about computer-integrated manufacturing (CIM). This report is organized into three parts: invited papers, analysis, and bibliography. The invited papers part examines various mechanical aspects of CIM. The analysis part assesses the major advances and provides a balanced analysis of the state of the art in CIM. Bibliography compiles the most important published material on the subject of mechanical aspects of CIM.

  • Anglo–American Microelectronics Data 1968–69

    Manufacturers R–Z
    • 1 Edición
    • G.W.A. Dummer + 1 más
    • Inglés
    Anglo-American Microelectronics Data 1968-69, Volume Two: Manufacturers R-Z presents information on the features of the design, construction and application of microelectronic devices. The book discusses the features of the design, construction and application of radiation integrated circuits; Raytheon integrated circuits; RCA integrated circuits; and Signetics integrated circuits. The text also describes the features of the design, construction and application of Siliconix integrated circuits; Sperry integrated circuits; Sprague integrated circuits; and STC thick film circuits. The features of the design, construction and application of Stewart-Warner micro circuits; Sylvania integrated circuits; Texas instruments semiconductor networks; and transitron integrated circuits are also encompassed. The book further tackles the features of the design, construction and application of Varo hybrid film integrated circuits; Welwyn thick film and thin film resistor networks; Westinghouse integrated circuits; and Zeltex hybrid integrated circuits. Designers, buyers, and users of microelectronic devices will find the book useful.

  • Fracture and Fracture Mechanics

    Case Studies
    • 1 Edición
    • R. B. Tait + 1 más
    • Inglés
    Fracture and Fracture Mechanics: Case Studies contains the proceedings of the Second National Conference on Fracture, held at the University of the Witwatersrand in Johannesburg, South Africa on November 26-27, 1984. This book presents case studies in fracture and fracture mechanics and highlights the problems associated with fracture, failure analysis, and safe design in industries as diverse as mining, power generation, transport, petrochemical, and manufacturing. This book has 29 chapters divided into five sections and opens with a discussion on the role of professional complacency in bridge failures. The first section is devoted to failure investigation and covers topics ranging from failure analysis of a hydraulic retarder piston to the use of scanning electron microscopy in investigating tungsten carbide-cobalt fractured components. The second section deals with slow crack growth and considers an approach to assessing structural integrity and fatigue failures in vibrating equipment. Failures arising from repair welding and incomplete heat treatment are described. The remaining chapters explore fitness for purpose evaluation of fractures; the environmental effects of fractures; and case studies of failure prevention in industries such as petrochemical, power generation, and transportation. This monograph will be of interest to structural engineers, metallurgists, and materials scientists and technologists.

  • Powtech '83 Particle Technology

    Event No. 280 of the EFCE
    • 1 Edición
    • Sam Stuart
    • Inglés
    Powtech '83: Particle Technology focuses on the techniques and processes involved in the handling and processing of powders and other related products. The book presents studies that show the composition, characteristics, value, and strength of materials when subjected to different conditions in different environments. Divided into five parts with 32 chapters, the book features the work of contributors who have conducted research on the composition and chemical processes involved in particle technology. The pieces that are presented feature experiments and tests conducted on different materials, such as coal and liquids. These experiments are supported by lengthy discussions coupled with numerical representation to validate the claims of authors in their respective concerns. Although the authors have their own topics to cover, they will manage to capture the interest of physicists, chemists, and mechanical and civil engineers who are interested in particle technology. Taking into consideration the value of information presented in the book, these professionals will find the book a reliable source of data in their profession and in their studies.

  • Scale Models in Engineering

    Fundamentals and Applications
    • 1 Edición
    • Richard I. Emori + 1 más
    • Inglés

  • The Control of Fat and Lean Deposition

    • 1 Edición
    • K.N. Boorman + 2 más
    • Inglés
    The Control of Fat and Lean Deposition is a collection of papers dealing with the methods of influencing fat and lean deposition in whole animals, such as the use of the immune response, the use of exogenously applied materials, transgenesis, or the diet itself. The papers also consider the results of fat manipulation and lean deposition on meat quality to achieve suitabilty for human consumption. Some papers review the hormonal regulation of muscle protein synthesis, degradation, and cell growth, noting that muscle protein turnover involves the regulation of cellular growth and metabolism of the whole body. Another paper investigates the surge in lipid accumulation during fattening, as well as the correlation between changes in flux or enzyme activities in growing animals to changes in lipid accretion. One paper examines the responsiveness of prenatal development of key tissues, such as skeletal tissue and adipose, to nongenetic influences. The paper also analyzes how such responsiveness influence the rate and composition of postnatal growth. Another paper discusses the observation that reducing fat content especially on the muscle tissue itself can adversely affect the eating quality and tenderness of meat. The collection is suitable for veterinarians, livestock growers, and researchers engaged in food processing and preservation.

  • High-Temperature Brazing in Controlled Atmospheres

    The Pergamon Materials Engineering Practice Series
    • 1 Edición
    • G. Sheward
    • D. W. Hopkins + 2 más
    • Inglés
    High Temperature Brazing in Controlled Atmospheres provides a discussion regarding the fundamentals, applications, and the potential of the brazing process. Comprised of eight chapters, the book covers several topics concerning the metallurgical process in brazing. Chapter 1 discusses the general bonding techniques, while Chapter 2 talks about the factors that affect the design of components to be joined by brazing and the theoretical aspects of the process that will influence design. Chapter 3 provides advices about the availability and properties of filler metals used in brazing, while Chapter 4 discusses furnaces. Chapter 5 tackles the atmospheric factors to consider in brazing, and Chapter 6 covers the brazing process itself. Chapter 7 talks about the applications of brazing in various settings, and Chapter 8 deals with quality control. The book will be of great use for technicians, designers, and engineering students or any other professionals whose work involves the brazing process.

  • Control of Ovulation

    • 1 Edición
    • D.B. Crighton + 2 más
    • Inglés
    Control of Ovulation discusses the general principles and practical applications of ovulation control. The book presents 25 papers that cover the basic research practices and practicalities of ovulation control. The materials are grouped according to their respective themes. The first three parts cover the hypothalamus, pituitary gland, and ovary, respectively. The remaining papers discuss concerns regarding the applications of ovulation control, such as ovulation failure; diagnosis of ovulatory disorders; and the induction and synchronization of ovulation. The text will be of great use to practitioners of obstetrics and gynecology in both human and veterinary medicine.

  • Distributed Process Control Report

    • 1 Edición
    • Architecture Technology Architecture Technology Corpor
    • Inglés
    Please note this is a short discount publication.Factory Managers and Production Planners - Distributed Process Control is the industrial technology destined to become the key to plant-wide management and the factory of the future.This unique, in-depth report concentrates on the state-of-the-art in Distributed Process Control, a technology which nearly 200 companies supply to users in all areas of manufacturing from paper-making to aerospace.The report examines the three vital categories of DPC systems:* Computer Based * Digital Electronic * atching and Proportioning Control Plus* Manufacturing Cell Control Systems * Supervisory Control and Data Acquisition (SCADA) Systems * Factory Communications Distributed Process Control and Factory Communications will ensure that you stay ahead of the competition and exploit this exciting new technology to the full.

  • Fluid Dynamics Transactions

    • 1 Edición
    • W. Fiszdon
    • Inglés
    Fluid Dynamics Transactions, Volume 2 compiles 46 papers on fluid dynamics, a subdiscipline of fluid mechanics that deals with fluid flow. The topics discussed in this book include developments in interference theory for aeronautical applications; diffusion from sources in a turbulent boundary layer; unsteady motion of a finite wing span in a compressible medium; and wall pressure covariance and comparison with experiment. The certain classes of non-stationary axially symmetric flows in magneto–gas–dynamics... description of the phenomenon of secondary flows in curved channels by means of convection of rotation lines; and some variational problems of gas dynamics are also deliberated in this text. This publication is a good reference for physicists and students researching on the natural science of fluids in motion.

  • Microprocessor Engineering

    • 1 Edición
    • B. Holdsworth
    • Inglés
    Microprocessor Engineering provides an insight in the structures and operating techniques of a small computer. The book is comprised of 10 chapters that deal with the various aspects of computing. The first two chapters tackle the basic arithmetic and logic processes. The third chapter covers the various memory devices, both ROM and RWM. Next, the book deals with the general architecture of microprocessor. The succeeding three chapters discuss the software aspects of machine operation, while the last remaining three chapters talk about the relationship of the microprocessor with the outside world. The text will be of great use to undergraduate students of various disciplines. Practitioners of computer-related fields with no previous digital experience will find this book useful.

  • Protecting Personnel at Hazardous Waste Sites

    • 2 Edición
    • WILLIAM F. MARTIN
    • Inglés
    The second edition of this book brings together a wide range of occupational safety and health recommendations and practices directly applying to hazardous waste site clean ups. In addition to providing the most current information on maximumprotection for clean up personnel, this book is a practical authoritative guide for those involved in clean up operations. The completely updated second edition cites the newest OSHA and NIOSH recommendations which have developed over the past decade and explores the new federal emphasis in hazardous waste site clean ups as Radiation safety, Toxicology, Unexploded ordanance, OSHA training, EPA training and site health and safety plans.

  • Mechanical Behaviour of Materials V

    Proceedings of the Fifth International Conference, Beijing, China, 3-6 June 1987
    • 1 Edición
    • M. G. Yan + 2 más
    • Inglés
    Provides a thorough up-to-date account of the latest developments in materials science and engineering research and applications. The contributed papers cover all aspects of this important field, including material aspects of fracture in engineering practice, fatigue criteria and material characterisation, environmental effects on fracture, high temperature deformation and failure and mechanical properties and engineering applications of composite and non-metallic materials. Contains approximately 200 papers from acknowledged experts.

  • Safety in the Process Industries

    • 1 Edición
    • Ralph King
    • Inglés
    Safety in the Process Industries aims to ensure the safety of people involved in process plants, especially those who face its immediate hazards and dangers. The book is divided into four parts. Part I covers topics such as the history of process hazards and attitudes in health and safety; laws concerned with the health and safety in the process industry; and the definitions of different terms related to health and safety. Part II discusses the electrical, chemical, and physical hazards in the process industries, as well as the dangers of flammability and corrosion. Part III talks about hazard control design; protective instrumentation; and maintenance and inspection. Part IV tackles topics related to the management of health and safety in industry processes such as emergency planning; safety training; and protection the working environment. The text is recommended for people concerned in the management, development, planning, design, construction, operation, inspection and maintenance of process plants, as well as those who oversee its safety.

  • Engineering Sites

    • 1 Edición
    • Inglés
    Developments in Geotechnical Engineering, Vol. 14B: Rockslides and Avalanches, 2: Engineering Sites focuses on initiatives to offer a foundation for studies of mass movement phenomena in the Western Hemisphere. The selection first takes a look at the contributions of Josef Stini to engineering, geology, and slope movement investigations, the concept of Karl Terzhagi on rockslides, and the contributions of Laurits Bjerrum to the mechanics of rockslides. Concerns cover stability of hard rock slopes, influence of geological details, relation between slide process and remedial treatment, water pressure in pores and fractures, slope creep, rockslides, and avalanches, and early warning of an impending slide. The publication then examines rock slope movements with hydroelectric power projects in Mexico, Bighorn Reservoir slides in Montana, U.S.A., rock avalanche and wave at Chungar, Peru, and wedge rockslides in Libby Dam and Lake Koocanusa in Montana. The text examines Hogarth Pit slope failure in Ontario, Canada, pit slope performance in shale in Wyoming U.S.A., Twin Buttes pit slope failure in Arizona, U.S.A., and the Prime Mine slope failure in Arizona, U.S.A. Discussions focus on stability analyses, description of slope failures, cause of failure, remedial actions, geotechnical properties of tertiary shales, and subsequent slope performance. The selection is a valuable source of data for researchers interested in rockslides and avalanches.

  • Advances in the Theory of Plates and Shells

    • 1 Edición
    • Volumen 24
    • George Z. Voyiadjis + 1 más
    • Inglés
    Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.

  • Strength of Structural Elements

    • 1 Edición
    • Volumen 26
    • Zbigniew Brzoska
    • M. Zyczkowski
    • Inglés
    This volume describes engineering applications of the mechanics of deformable bodies and the elasticity theory relevant to them. It is concerned mainly with one-dimensional problems, which arise because either one of the dimensions of a body is much greater than the remaining two or the functions of two or three variables may be reduced to one variable.Problems of this type are of twofold importance. Firstly, many engineering problems can be described with sufficient accuracy just in this way. Secondly, unidimensional problems with known analytical solutions may serve either for testing numerical methods or for the analysis of fundamental concepts and phenomena, whose physical nature in three-dimensional approach might be obscured by the analytical-numerical aspect. The authors have confined themselves for the most part to the analysis of elastic behaviour of structures; however some attention is also given to elastic problems. A deterministic approach has been applied throughout the book. It will serve as a springboard for further work with stochastic approaches which are being increasingly used in engineering practice today.

  • Bibliography on the Fatigue of Materials, Components and Structures

    1961 - 1965
    • 1 Edición
    • J. Y. Mann
    • Inglés
    Bibliography on the Fatigue of Materials, Components and Structures, Volume 3 addresses the problems associated with fatigue loadings as evident in branches of engineering and technology. Such debilitating factor also affects the human skeletal system. The book provides several references that show an increasing focus being given to the problem of fatigue in materials, components, and structures. The journals and lists of references used in the book, which discuss the subject of fatigue, are chosen to give an initial identification of citations. These sources are accompanied by computer-based documentation systems. The bibliographical data for each citation are thoroughly reviewed by checking the original bases of publication. The references in the book are arranged chronologically according to its year of publication. Major use has been made of abbreviations for the titles of journals and publications. The book can serve as a valuable tool for doctors, therapists, students, and researchers in the field of medicine.

  • Marine Control, Practice

    • 1 Edición
    • D.A. Taylor
    • Inglés
    Marine Engineering Series: Marine Control Practice deals with the instrumentation and its associated control systems that are found onboard ships. The book covers topics such as the measuring instruments and control signals for different parameters; system analysis; process and kinetic control systems; and commercially available equipment. Also covered in the book are correcting units such as actuators and valves; the control systems for boilers, turbines, auxiliary equipment; and control involving computers. The text is recommended for those who need to complete the Certificates of Competency for Marine Engineers, including Extra First Class. The book will also be beneficial to offshore engineers.

  • Stress Analysis for Creep

    • 1 Edición
    • J.T. Boyle + 1 más
    • Inglés
    Stress Analysis for Creep focuses on methods on creep analysis. The book first ponders on the occurrence of creep in mechanical engineering components, including background to stress analysis for creep and general-purpose computer programs for creep analysis. The text presents a phenomenological description of creep. The phenomenon of creep, physical mechanisms of creep, convenient uniaxial constitutive relationships, and creep rupture are described. The book also explains simple component behavior, creep under multiaxial states of stress, and stress analysis for steady creep. The text focuses on reference stress methods in steady creep. Reference stresses for combined loading with a power law; non-isothermal power-law creep; reference temperatures; and approximate reference stress methods are elaborated. The text also focuses on stress analysis for transient creep; approximate solution of transient creep problems; and creep buckling and rupture. The text highlights the design for creep, including material data requirements and constitutive modeling for design; verification and qualification of stress analysis; and design methodology. The book is a good source of data for readers wanting to study creep analysis.

  • Distributed Parameter Control Systems

    Theory and Application
    • 1 Edición
    • Spyros G. Tzafestas
    • Inglés
    Distributed Parameter Control Systems: Theory and Application is a two-part book consisting of 10 theoretical and five application-oriented chapters contributed by well-known workers in the distributed-paramete... systems. The book covers topics of distributed parameter control systems in the areas of simulation, identification, state estimation, stability, control (optimal, stochastic, and coordinated), numerical approximation methods, optimal sensor, and actuator positioning. Five applications works include chemical reactors, heat exchangers, petroleum reservoirs/aquifers, and nuclear reactors. The text will be a useful reference for both graduate students and professional researchers working in the field.

  • Stability of Structures by Finite Element Methods

    • 1 Edición
    • Volumen 40
    • Z. Waszczyszyn + 2 más
    • Inglés
    This book is the consequence of research undertaken by the authors in the field of advanced problems of structural mechanics. Stability analysis of structures comes under this area because of the complex models and computational methods needed for analysis. In the mid seventies, a joint effort began between a group of researchers and teachers of the Department of Civil Engineering and Computer Center of the Cracow University of Technology. One of the important results of the collaboration has been this publication.

  • Classical and Modern Control with Worked Examples

    Pergamon International Library of Science, Technology, Engineering and Social Studies: International Series on Systems and Control, Volume 2
    • 1 Edición
    • Jean-Pierre Elloy + 1 más
    • M G Singh + 2 más
    • Inglés
    Classical and Modern Control with Worked Examples contains problems in automatic control, with emphasis on continuous time systems. The book contains exercises that increase in difficulty. The text is organized into three parts, with each of the three parts divided into two chapters. The first chapter of each part consists of a course abstract; the second chapter contains the exercises relevant to the course in question. The first and second parts are devoted to linear and non-linear servo-systems. The third part introduces representation in the form of equations of state of linear systems. The book will be useful to students, technicians, and qualified engineers who wish to acquaint themselves in a practical way with both the traditional and the modern principles of automatic control, and with their application to industrial processes of all kinds.

  • Stability in Viscoelasticity

    • 1 Edición
    • Volumen 38
    • A.D. Drozdov + 1 más
    • J. D. Achenbach
    • Inglés
    The subject of stability problems for viscoelastic solids and elements of structures, with which this book is concerned, has been the focus of attention in the past three decades. This has been due to the wide inculcation of viscoelastic materials, especially polymers and plastics, in industry. Up-to-date studies in viscoelasticity are published partially in purely mathematical journals, partially in merely applied ones, and as a consequence, they remain unknown to many interested specialists. Stability in Viscoelasticity fills the gap between engineers and mathematicians and converges theoretical and applied directions of investigations.All chapters contain extensive bibliographies of both purely mathematical and engineering works on stability problems. The bibliography includes a number of works in Russian which are practically inaccessible to the Western reader.

  • Microprocessors

    Epo Applied Technology Series
    • 1 Edición
    • O. A. R. Cornillie
    • Inglés
    Microprocessors presents an overview of the state of the art in the field of microprocessors and illustrates, with the aid of patents, its utilization and application. Organized into six parts, the book begins with an introduction to the microprocessor, microcomputer, and software. Parts I-III focus on program control, digital control, and electrical motor control. Subsequent parts show the medical applications, measuring instruments, and treatment of data in microprocessors.

Temas relacionados