Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • The Process of Learning Mathematics

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • L. R. Chapman
    • Inglés
    The Process of Learning Mathematics describes the process of learning mathematics and covers topics ranging from the nature of mathematics to the role of intuition and logic in mathematics; the thought processes involved in the teaching of mathematics; reflective intelligence and the use of symbols; and discovery as a way of learning mathematics. Computer-assisted instruction in mathematics is also considered. This book is comprised of 19 chapters and begins with a reflection on the nature of mathematics, followed by a discussion on the importance of intuition and logic in mathematics. The ideas of generalization, structure, approximations, and the evolution of some particular aspect of applied mathematics are then examined from the viewpoint of a teacher. Subsequent chapters deal with schematic learning; motivation and emotional and interpersonal factors; uses of programmed material in British schools and colleges; and structural apparatuses used in teaching mathematics. The Midlands Mathematical Experiment and the Nuffield Foundation Mathematics Teaching Project in Britain are also described. This monograph will be of interest to teachers and students of mathematics.

  • Modern TTL Circuits Manual

    • 1 Edición
    • R. M. Marston
    • Inglés
    Modern TTL Circuits Manual provides an introduction to the basic principles of Transistor–Transisto... Logic (TTL). This book outlines the major features of the 74 series of integrated circuits (ICs) and introduces the various sub-groups of the TTL family. Organized into seven chapters, this book begins with an overview of the basics of digital ICs. This text then examines the symbology and mathematics of digital logic. Other chapters consider a variety of topics, including waveform generator circuitry, clocked flip-flop and counter circuits, special counter/dividers, registers, data latches, comparators, and code converters. This book discusses as well the most basic elements used in digital electronics. The final chapter deals with specialized types of IC, including decoders, multiplexers, demultiplexers, full-adders, addressable latches, rate multipliers, bus transceivers, and priority encoders. This book is a valuable resource for design engineers, technicians, and experimenters. Students of electronics will also find this book extremely useful.

  • Glass Reinforced Plastics

    • 1 Edición
    • Brian Parkyn
    • Inglés
    Glass Reinforced Plastics discusses several areas in the production of glass reinforced plastics. The 20 chapters of the book are organized into four parts — introduction, end uses, materials, and engineering design. The first part covers the historical background of glass reinforced plastics. Part II talks about the various application of glass reinforced plastics, such as in constructions, boat hulls, and chemical plants. Part III covers the materials, which include resin systems, reinforcement, and specifications. Part IV deals with the engineering design concerns, such as nature of composites, weathering, and fatigue. The text will be of great use to researchers and practitioners in the field of materials science.

  • Aspects of Civil Engineering Contract Procedure

    • 3 Edición
    • R. J. Marks + 2 más
    • Inglés
    Revised and expanded, this book provides an up-to-date and comprehensive description of civil engineering contract procedures, and covers the whole spectrum of the legal, contractual and valuation implications of contracts for construction works. This third edition covers relevent English Law up to 1983. The extensive amendments also include a thoroughly revised chapter on overseas contracts, and a comparison of the JCT 80 contract with the ICE contract.

  • Modern Practice in Servo Design

    International Series of Monographs in Electrical Engineering
    • 1 Edición
    • D. R. Wilson
    • Inglés
    International Series of Monographs in Electrical Engineering, Volume 2: Modern Practice in Servo Design focuses on servomechanics and feedback control systems. The selection first takes a look at basic servomechanism theory, including block diagrams, servo components and compensation, power amplification, absolute stability, transfer functions, and frequency response design methods. The book then discusses the design of a large servomechanism and development of the servo design, as well as digital servo techniques, effects of disturbances, performance specification, mechanical resonance, and completed control loop and its stability. The text describes the design of large antennas for radio telescope and satellite trackers. Topics include servo system performance, tracking accuracy requirements, closed loop performance, and dynamic performance. The book also takes a look at the application of analog computers to the design of a servomechanism and the use of hybrid computers in servo design. The selection is a valuable source of information for readers interested in servomechanics and feedback control systems.

  • A Course of Mathematics for Engineerings and Scientists

    Volume 5
    • 1 Edición
    • Brian H. Chirgwin + 1 más
    • Inglés
    A Course of Mathematics for Engineers and Scientists, Volume 5 presents the solutions of differential equations by obtaining the results in different forms. This book discusses the significant branch of mathematics generalizing the elementary ideas of function, integration, and differentiation. Organized into four chapters, this volume begins with an overview of the use of Fourier series that leads to solutions consisting of infinite series. This text then discusses the fundamental advantage of Laplace and Fourier transformation. Other chapters consider the technique of obtaining the solutions of ordinary, and several partial, differential equations from definite integrals. This book discusses as well the mathematical basis underlying the transformation methods connecting Laplace and Fourier transformations, which is given by the advancement of complex variable theory. The final chapter deals with the series of devices for inverting the transformation functions. This book is a valuable resource for scientists, engineers, mathematicians, and undergraduate students.

  • Transducer Handbook

    User's Directory of Electrical Transducers
    • 1 Edición
    • H B Boyle
    • David Page
    • Inglés
    When selecting or using a particular type of transducer or sensor, there are a number of factors which must be considered. The question is not only for what kind of measurement, but under what physical conditions, constraints of accuracy, and to meet which service requirements, is a transducer needed? This handbook is designed to meet the selection needs of anyone specifying or using transducers with an electrical output. Each transducer is described in an easy-to-use tabular format, giving all of the necessary data including operating principles, applications, range limits, errors, over-range protection, supply voltage requirements, sensitivities, cross sensitivities, temperature ranges and sensitivities and signal conditioning needs. The author has added notes that reflect his broad practical experience. Added to this is an extensive worldwide suppliers directory.

  • A Guide to Printed Circuit Board Design

    • 1 Edición
    • Charles Hamilton
    • Inglés
    A Guide to Printed Circuit Board Design discusses the basic design principles of printed circuit board (PCB). The book consists of nine chapters; each chapter provides both text discussion and illustration relevant to the topic being discussed. Chapter 1 talks about understanding the circuit diagram, and Chapter 2 covers how to compile component information file. Chapter 3 deals with the design layout, while Chapter 4 talks about preparing the master artworks. The book also covers generating computer aided design (CAD) master patterns, and then discusses how to prepare the production drawing and production photography. The subsequent chapters tackle the preparation of assembly drawings and case histories. The last chapter talks about the manufacturing and flow soldering the PCB. The book will be of great use to both novice and experienced mechanical designers who wish to get acquainted with the basics of PCB design.

  • Combustion and Mass Transfer

    A Textbook with Multiple-Choice Exercises for Engineering Students
    • 1 Edición
    • D Brian Spalding
    • Inglés
    Combustion and Mass Transfer: A Textbook with Multiple-Choice Exercises for Engineering Students is a 20-chapter lecture text that covers various aspects of combustion and mass transfer. Each of the 20 chapters is provided with a set partly analytical and multiple-choice tutorial exercises, designed to assist the student to understand the material of the lectures. The opening chapters deal with the importance of combustion and mass transfer processes. The succeeding chapters survey the concepts and principles of droplet vaporization, droplet combustion, liquid-propellant rocket, and laminar and turbulent jet. These topics are followed by discussions of laminar and turbulent diffusion flame, kinetically-influenc... phenomena, chemical kinetics, and spontaneous ignition. The remaining chapters consider the basic concepts of stirred reactor, flame stabilization, laminar flame propagation, spark ignition, and coal-particle combustion. This book is intended for undergraduate mechanical engineering students.

  • Space Activity Impact on Science and Technology

    Proceedings of the XXIVth International Astronautical Congress, Baku, USSR, 7–13 October, 1973
    • 1 Edición
    • L.G. Napolitano + 2 más
    • Inglés
    Space Activity: Impact on Science and Technology contains the proceedings of the 24th International Astronautical Congress held in the USSR on October 7-13, 1973. Contributors focus on the contribution of space research to the development of science and technology, including biology and medicine. This text begins with a discussion on the role played by Soviet automatic vehicles in the progress of space automatics and control theory. The discussion then turns to the problems of space technology and their implications for science and technology, industrial applications of aerospace technology, and development of liquid-propellant rocket engineering technology in the USSR. The chapters that follow explore the contribution of space medicine to public health; the role of astronautics in the development of methods of celestial mechanics; the flight performance of the unmanned Skylab space station; and remote sensing of the environment and earth's resources studies from Soviet manned spacecraft. The book concludes with an appraisal of international standards for model rocket engines. This book will be of interest to students of astronomy as well as researchers and practitioners working in the field of space exploration and research.

  • Newnes Electronics Toolkit

    • 1 Edición
    • Geoff Phillips
    • Inglés
    Newnes Electronics Toolkit brings together fundamental facts, concepts, and applications of electronic components and circuits, and presents them in a clear, concise, and unambiguous format, to provide a reference book for engineers. The book contains 10 chapters that discuss the following concepts: resistors, capacitors, inductors, semiconductors, circuit concepts, electromagnetic compatibility, sound, light, heat, and connections. The engineer's job does not end when the circuit diagram is completed; the design for the manufacturing process is just as important if volume production is to be undertaken. The task of component selection and second or even third sourcing of alternative components is an essential part of the design process. This book attempts to assist the engineer with the component sourcing process by the inclusion of tables which present the electrical and mechanical parameters of electronic components which have evolved to be "industry standard" devices. The tables are in a format where the parameters of components from different manufacturers may be compared easily and a decision made as to their suitability for the engineer's circuit.

  • Heat and Fluid Flow in Power System Components

    Hmt The Science & Applications of Heat and Mass Transfer
    • 1 Edición
    • A. M. A. Rezk
    • Inglés
    Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.

  • An Introduction to Equilibrium Thermodynamics

    Pergamon Unified Engineering Series
    • 1 Edición
    • Bernard Morrill
    • Thomas F. Irvine + 2 más
    • Inglés
    An Introduction to Equilibrium Thermodynamics discusses classical thermodynamics and irreversible thermodynamics. It introduces the laws of thermodynamics and the connection between statistical concepts and observable macroscopic properties of a thermodynamic system. Chapter 1 discusses the first law of thermodynamics while Chapters 2 through 4 deal with statistical concepts. The succeeding chapters describe the link between entropy and the reversible heat process concept of entropy; the second law of thermodynamics; Legendre transformations and Jacobian algebra. Finally, Chapter 10 provides an introduction to irreversible thermodynamics. This book will be useful as an introductory text to thermodynamics for engineering students.

  • Transistor Switching and Sequential Circuits

    • 1 Edición
    • John J. Sparkes
    • Inglés
    Transistor Switching and Sequential Circuits presents the basic ideas involved in the construction of computers, instrumentation, pulse communication systems, and automation. This book discusses the design procedure for sequential circuits. Organized into two parts encompassing eight chapters, this book begins with an overview of the ways on how to generate the types of waveforms needed in digital circuits, principally ramps, square waves, and delays. This text then considers the behavior of some simple circuits, including the inverter, the emitter follower, and the long-tailed pair. Other chapters examine the significant methods of producing non-sinusoidal waveforms, such as saw-tooth waves or square waves. This book discusses as well the procedures in organizing a circuit, which can be used in more complex applications than in the design of counters. The final chapter deals with the principle of machine multiplication. This book is a valuable resource for students engaged in the design and construction of digital or switching circuits.

  • Multiple Choice Questions in Electronics and Electrical Engineering

    • 1 Edición
    • T J DAVIES
    • Inglés
    A unique compendium of over 2000 multiple choice questions for students of electronics and electrical engineering. This book is designed for the following City and Guilds courses: 2010, 2240, 2320, 2360. It can also be used as a resource for practice questions for any vocational course.

  • Russian Social Science Reader

    The Commonwealth and International Library of Science Technology Engineering and Liberal Studies
    • 1 Edición
    • E. L. Johnson + 1 más
    • C. V. James
    • Inglés
    Russian Social Science Reader is one of a series designed for non-linguists who need knowledge of the Russian language in order to pursue their interests in fields other than language or literature. The purpose of this book is to provide real assistance to the trained social scientist who, having already mastered his own discipline, is willing to devote a little time to mastering the Russian language for the purpose of reading specialist material in his own field. The book begins with discussions of Russian syntax and word formation, and Russian political, economic, and legal terminologies. Separate chapters then provide extracts from the Constitution of the Russian Socialist Federative Soviet Republic and Constitution of the USSR in Russian with English translations; and extracts dealing with wide range of topics that illustrate a range of linguistic usage. Topics covered include housing and education, employment of the disabled, industrialization, collectivization of agriculture, and the Soviet economic and legal systems.

  • Fundamental Principles of Heat Transfer

    • 1 Edición
    • Stephen Whitaker
    • Inglés
    Fundamental Principles of Heat Transfer introduces the fundamental concepts of heat transfer: conduction, convection, and radiation. It presents theoretical developments and example and design problems and illustrates the practical applications of fundamental principles. The chapters in this book cover various topics such as one-dimensional and transient heat conduction, energy and turbulent transport, forced convection, thermal radiation, and radiant energy exchange. There are example problems and solutions at the end of every chapter dealing with design problems. This book is a valuable introductory course in heat transfer for engineering students.

  • Theory of Semiconductor Junction Devices

    A Textbook for Electrical and Electronic Engineers
    • 1 Edición
    • J. H. Leck
    • Inglés
    Theory of Semiconductor Junction Devices: A Textbook for Electrical and Electronic Engineers presents the simplified numerical computation of the fundamental electrical equations, specifically Poisson's and the Hall effect equations. This book provides the fundamental theory relevant for the understanding of semiconductor device theory. Comprised of 10 chapters, this book starts with an overview of the application of band theory to the special case of semiconductors, both intrinsic and extrinsic. This text then describes the electrical properties of conductivity, semiconductors, and Hall effect leading to the main topic of p–n junction theory. Other chapters examine the characteristics of the p–n junction in detail as this forms the fundamental element in the majority of semiconductor devices. The final chapter deals with the field effect transistor, which is known as the unipolar transistor. This book is a valuable resource for students of solid state electronics. Electrical and electronic engineers will also find this book useful.

  • CMOS Circuits Manual

    • 1 Edición
    • R. M. Marston
    • Inglés
    CMOS Circuits Manual is a user’s guide for CMOS. The book emphasizes the practical aspects of CMOS and provides circuits, tables, and graphs to further relate the fundamentals with the applications. The text first discusses the basic principles and characteristics of the CMOS devices. The succeeding chapters detail the types of CMOS IC, including simple inverter, gate and logic ICs and circuits, and complex counters and decoders. The last chapter presents a miscellaneous collection of two dozen useful CMOS circuits. The book will be useful to researchers and professionals who employ CMOS circuits in their work, such as practical design engineers.

  • Manufacturing Assembly Handbook

    • 1 Edición
    • Bruno Lotter
    • Inglés
    Manufacturing Assembly Handbook identifies the possibilities for the rationalization of assembly in relation to the production rate and the product design. This book is based on practical experience for practical application and will give experts in the field of rationalization guidelines for the solution of rationalization problems. Topics discussed in the text include the determination of the economic efficiency of assembly concepts, modules for the automation of assembly processes, design of assembly machines, and design of flexible-assembly systems. The integration of parts manufacturing processes into assembly equipment or of assembly operations into parts production equipment, planning and efficiency of automated assembly systems, and the operation of automated assembly systems are covered as well. Production engineers and managers and students of production technology will find the book very useful.

  • Information Symposium Measurement and Control Techniques in Rolling

    Luxembourg, 2 and 3 September 1981
    • 1 Edición
    • Sam Stuart
    • Inglés
    Information Symposium: Measurement and Control Techniques in Rolling covers the proceedings of the 1981 Information Symposium on Measurement and Control Techniques in Rolling, held in Luxembourg, sponsored by the Commission of the European Communities. This book is organized into five parts encompassing 25 chapters that assess the impact of research and development on steel-making technology. The opening part presents an overview of the developments in the rolling mill technology and measuring instruments. The next part discusses the requirements and advances in the reheating processes in rolling mills, with a special emphasis on the conditioning of the steel in preparation for the recrystallization and transformation process to obtain the desired mechanical properties of the product. This part also examines the non-destructive testing techniques for internal and surface defects determination in steel. The third part of this text tackles the progress made in the rolling of long products, particularly in rod, merchant bar, and medium and heavy section rolling lines. The discussion then shifts to various research programs sponsored by the European Economic Community that have made a number of practical contributions to solving problems in the field. The concluding part focuses on the condition monitoring approach to maintenance and the development of monitoring techniques. This book is of great benefit to steel researchers, designers, engineers, and manufacturers.

  • Handbook of Fiber Optics

    Theory and Applications
    • 1 Edición
    • Chai Yeh
    • Inglés
    Dr. Yeh supplies a firm theoretical foundation in such topics as propagation of light through fibers, fiber fabrication, loss mechanisms, and dispersion properties. He then expands from this into such practical areas as fiber splicing, measuring loss in fibers, fiber-based communications networks, remote fiber sensors, and integrated optics. Whether involved in fiber optics research, design, or practical implementation of systems, this handbook will be extremely useful.

  • Electronics Engineer's Reference Book

    • 6 Edición
    • F. F. Mazda
    • Inglés
    Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

  • Handbook of Research on Face Processing

    • 1 Edición
    • A.W. Young + 1 más
    • Inglés
    The high degree of scientific interest in face processing is readily understandable, since people's faces provide such a wealth of social information. Moreover, investigations have produced evidence of highly precocious face processing abilities in infants, and of neural mechanisms in adults that seem to be differentially involved in face perception. Such findings demonstrate that, as one might expect, the psychological importance of the face has clear biological underpinnings.There are also urgent practical reasons for wanting to understand face processing. The most extensively investigated of these involve forensic issues. Other applications include the development of automated recognition systems for security and other purposes, and understanding and rehabilitating disorders and impairments linked to brain injuries and psychiatric conditions.Current studies of face processing are grouped in the volume into eleven topic areas. For each area, the editors approached an acknowledged authority and commissioned a review chapter summarising the findings that have been made. These chapters were then circulated to other experts who were asked to write brief commentaries that developed theoretical or empirical points of importance to each area. In this way, a balanced coverage of each topic is achieved.The book begins with a section examining the evidence suggesting that there may be something `special' about face processing. This is followed by consideration of the face as a visual pattern. Then there are four sections dealing with major uses of facial information, followed by sections discussing the development of face processing abilities and the neural mechanisms involved. The last three sections of the book deal with topics for which there are important practical applications for the studies reported.

  • Robotics

    3rd Edition
    • 1 Edición
    • Architecture Technology Architecture Technology Corpor
    • Inglés
    Please note this is a Short Discount publication.Thorough... revised, this authoritative report continues to provide a comprehensive, yet accessible introduction to Fixed Industrial Robots.This 1991/92 edition ensures that professionals involved in Factory Automation have a comprehensive reference source enabling them to keep abreast of all the key developments in this powerful and rapidly evolving technology.The report examines the different kinds of industrial robots from the following angles:• How they are programmed to perform certain tasks.• How they are integrated into the manufacturing process.• Their use in manufacturing plants for assembly, painting, sealant application and welding.Key features• Vision systems• Microprocessors• Expert systems• Industrial end effectors• Commercial end–of–arm tooling• Automatic guided vehiclesAlso• Robotics safety• Checking and evaluating robots• The economic justifications for robots• Employee support for robots.

  • Dynamics of Fixed Marine Structures

    • 3 Edición
    • N. D. P. Barltrop + 1 más
    • Inglés
    Dynamics of Fixed Marine Structures, Third Edition proves guidance on the dynamic design of fixed structures subject to wave and current action. The text is an update of the ""UR8"" design guide ""Dynamics of Marine Structures"" with discussion of foundations, wind turbulence, offshore installations, earthquakes, and strength and fatigue. The book employs analytical methods of static and dynamic structural analysis techniques, particularly the statistical and spectral methods when applied to loading and in the calculating dynamic responses. The statistical methods are explained when used to wave, wind, and earthquake calculations, together with the problems encountered in actual applications. Of importance to fixed offshore platforms are the soil properties and foundation covering soil behavior, site investigation, testing, seabed stability, gravity structures, and the use of single piles. Methods of forecasting, measuring, and modeling of waves and currents are also presented in offshore structure construction. Basic hydrodynamics is explained in understanding wave theory, and some description is given to forecasting of environmental conditions that will affect the structures. The effects of vortex-induced vibrations on the structure are explained, and the three methods that can prevent vortex-induced oscillations are given. Wind turbulence or wind loads are analyzed against short natural period or long natural periods of structures. The transportation of offshore platforms, installation, and pile driving, including examples of the applications found in the book, are given as well. The guide is helpful for offshore engineers, designers of inshore jetties, clients needing design and analysis work, specialists related to offshore structural engineering, and students in offshore engineering.

  • Basic Matrix Algebra and Transistor Circuits

    • 1 Edición
    • G. Zelinger
    • Inglés
    Basic Matrix Algebra and Transistor Circuits deals with mastering the techniques of matrix algebra for application in transistors. This book attempts to unify fundamental subjects, such as matrix algebra, four-terminal network theory, transistor equivalent circuits, and pertinent design matters. Part I of this book focuses on basic matrix algebra of four-terminal networks, with descriptions of the different systems of matrices. This part also discusses both simple and complex network configurations and their associated transmission. This discussion is followed by the alternative methods of deriving the transmission matrix using Kirchhoff's law. Part II introduces matrix analysis of transistor circuits, and then shows in detail the three transistor configurations: common-base, common-emitter, and common collector. A step-by-step method of transmission matrices derivation for each transistor configuration is then explained. This book notes the significance of matrix algebra in dealing with amplifier problems in a variety of output network configurations. Part III focuses on several aspects of single-stage transistor ampler design. This part explains how matrix algebra can be used to derive the exact input, output impedances, and the reverse transfer properties of transistor amplifiers with full load and generator terminations. Through mathematical analysis, the book shows the accuracy of matrix analysis in transistor amplifier design. This book is suitable for design engineers, electrical engineers, and students and practitioners of applied mathematics.

  • Understand Electronics

    • 1 Edición
    • Owen Bishop
    • Inglés
    Understand Electronics provides a readable introduction to the exciting world of electronics for the student or enthusiast with little previous knowledge. The subject is treated with the minimum of mathematics and the book is extensively illustrated.This is an essential guide for the newcomer to electronics, and replaces the author's best-selling Beginner's Guide to Electronics.The step-by-step approach makes this book ideal for introductory courses such as the Intermediate GNVQ.

  • Systems Effectiveness

    • 1 Edición
    • A. R. Habayeb
    • Inglés
    Highlights three principal applications of system effectiveness: hardware system evaluation, organizational development and evaluation, and conflict analysis. The text emphasizes the commonality of the system effectiveness discipline. The first part of the work presents a framework for system effectiveness, partitioning and hierarchy of hardware systems. The second part covers the structure, hierarchy, states, functions and activities of organizations. Contains an extended Appendix on mathematical concepts and also several project suggestions.

  • Naval Architecture for Marine Engineers

    • 1 Edición
    • W. Muckle
    • Inglés
    Naval Architecture for Marine Engineers focuses on resistance, propulsion, and vibration aspects of ships. The book first discusses the functions, layouts, and types of ships and terms used. The text looks at classification societies and governmental authorities influential on the design, construction, and safety of ships. Lloyd's Register of Shipping; governmental authorities; and Inter-governmental Maritime Consultative Organization (IMCO) are noted. The book also highlights ship calculations, including trapezoidal rule, Simpson's rule, and other rules for calculation. The text discusses as well the buoyancy, stability, and trim. Conditions for equilibrium of body floating in still water; calculation of underwater volume; stability at large angle of inclination; and flooding and damaged stability are considered. The selection also underscores structural strength of ships. Static forces on a ship in still water; dynamic longitudinal strength problem; resistance of ship to buckling; and materials used in ships are noted. The text also looks at resistance, powering, vibration, and propulsion of ships. The book is a vital source of data for readers interested in naval architecture.

  • Direct Rolling and Hot Charging of Strand Cast Billets

    Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy
    • 1 Edición
    • J.J. Jonas
    • Inglés
    This volume is a collection of papers presented at the International Symposium held in Montreal August 1988 as part of the 27th Annual Conference of Metallurgists, co-sponsored by the Canadian Steel Industry Research Association, the Canadian Continuous Steel Casting Research Group and the Canadian Institute of Mining and Metallurgy. Four topic areas are covered in the presentations: (1) casting practice and billet quality for direct rolling and hot charging; (2) temperature equalization methods and equipment; (3) surface quality and sensors and (4) mechanical handling of billets for direct rolling and charging.

  • Digital Calculations of Engine Cycles

    Prepared Under the Auspices of the SAE Fuels and Lubricants Activity Committee
    • 1 Edición
    • E. S. Starkman + 2 más
    • Inglés
    Digital Calculations of Engine Cycles is a collection of seven papers which were presented before technical meetings of the Society of Automotive Engineers during 1962 and 1963. The papers cover the spectrum of the subject of engine cycle events, ranging from an examination of composition and properties of the working fluid to simulation of the pressure-time events in the combustion chamber. The volume has been organized to present the material in a logical sequence. The first two chapters are concerned with the equilibrium states of the working fluid. These include the concentrations of various species of any significance that may appear at equilibrium in the combustion products, as well as the pressures and temperatures to be expected. This is followed by separate chapters on Mollier diagrams of the combustion products and the Otto cycle. The last two chapters focus on the synthesis of the spark ignition engine cycle from basic information on thermodynamics, heat transfer, and combustion. The results of the synthesis of these cycles are then compared to the actual cycle produced by an engine.

  • Cast Iron: Physical and Engineering Properties

    • 2 Edición
    • H. T. Angus
    • Inglés
    Cast Iron: Physical and Engineering Properties describes the importance of iron and its properties, as well as the process of casting in the different fields of engineering. The book covers topics such as the mechanical, physical, and electrical properties of iron and the different tests under which it is subjected; the effects of heat treatment on gray cast iron; and the resistance of cast iron to heat and stress. Topics also include internal casting stresses; cast iron beams and columns; and the application of the specifications for cast iron to design. The text is recommended for metallurgists and engineers who are interested in cast iron, its properties, and its uses in construction.

  • Phase Equilibria in Chemical Engineering

    • 1 Edición
    • Stanley M. Walas
    • Inglés
    Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.

  • Advances in Energy Systems and Technology

    Volume 5
    • 1 Edición
    • Peter L. Auer + 1 más
    • Inglés
    Advances in Energy Systems and Technology: Volume 5 present articles that provides a critical review of specific topics within the general field of energy. It discusses the fuel cells for electric utility power generation. It addresses the classification of fuel cell technologies. Some of the topics covered in the book are the major components of the fuel cell; the phosphoric acid fuel cells; molten carbonate fuel cells; solid oxide fuel cells; electric utility fuel cell systems; and the integration within fuel cell power plants. The analysis of the solar ponds is covered. The operational problems with salt-gradient solar ponds are discussed. The text describes the membrane-stratified solar ponds. A study of the household demand for conservation is presented. A chapter is devoted to the construction of the insulation index. Another section focuses on the use of Box-Cox transform for both dependent and explanatory variables. The book can provide useful information to scientists, engineers, students, and researchers.

  • Fusion Research

    Principles
    • 1 Edición
    • Thomas James Dolan
    • Inglés
    Fusion Research, Volume I: Principles provides a general description of the methods and problems of fusion research. The book contains three main parts: Principles, Experiments, and Technology. The Principles part describes the conditions necessary for a fusion reaction, as well as the fundamentals of plasma confinement, heating, and diagnostics. The Experiments part details about forty plasma confinement schemes and experiments. The last part explores various engineering problems associated with reactor design, vacuum and magnet systems, materials, plasma purity, fueling, blankets, neutronics, environment, and fusion-fission hybrids. The book will be of value to those entering the field and to those already engaged in fusion research.

  • Matrix Structural Analysis

    Pergamon Unified Engineering Series
    • 1 Edición
    • Jamal J. Azar
    • Inglés
    Matrix Structural Analysis focuses on the theory and practical application of matrix structural analysis. Organized into seven chapters, this book first describes the matrix algebra and the fundamental structural concepts and principles which are directly related to the development of the matrix methods. Subsequent chapters present the theory and application of the direct stiffness matrix method and matrix force method to structural analysis. The element stiffness matrices of lifting surface type structures and the general theory of analysis by structural partitioning are also presented. This book will be useful for students and practicing engineer as a quick reference material in this field of interest.

  • Mechanics Today

    Volume 3
    • 1 Edición
    • S. Nemat-Nasser
    • Inglés
    Mechanics Today, Volume 3 provides the advances in the fields of solid and fluid mechanics and applied mathematics. This volume is divided into six chapters that discuss the fundamentals and analytical and experimental results of dynamic behavior of linear and nonlinear systems. Chapter I provides a formulation of the effective stiffness theory with equations of motion and boundary conditions presented for the case of plain strain motion. Chapter II summarizes some of the analytical results that have been obtained in an effort to improve understanding of elastodynamic fracture processes. Chapter III presents the matrix difference equations used to formulate problems related to random vibration of periodic and almost periodic structures, taking advantage of the identical construction of the interconnecting units. Chapter IV describes a basic approach to the Oseen problem through the use of integral representations of the velocity and pressure fields. Chapter V deals with an analysis of nonlinear gyroscopic systems and the motions of high-order nongyroscopic systems. Chapter VI focuses on the application of the WKB perturbation method in the study of static deformation, vibration, wave propagation, and instability of elastic bodies. This volume is of great value to solid and fluid mechanics specialists and also to non-specialists with sufficient background of the field.

  • Steel and Its Heat Treatment

    Bofors Handbook
    • 1 Edición
    • Karl-Erik Thelning
    • Inglés
    Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.

  • Electronics Reliability–Calculation and Design

    Electrical Engineering Division
    • 1 Edición
    • Geoffrey W. A. Dummer + 1 más
    • N. Hiller
    • Inglés
    Electronics Reliability–Calculat... and Design provides an introduction to the fundamental concepts of reliability. The increasing complexity of electronic equipment has made problems in designing and manufacturing a reliable product more and more difficult. Specific techniques have been developed that enable designers to integrate reliability into their products, and reliability has become a science in its own right. The book begins with a discussion of basic mathematical and statistical concepts, including arithmetic mean, frequency distribution, median and mode, scatter or dispersion of measurements, and the normal and binomial distributions. Separate chapters deal with techniques for calculating equipment and system reliability; safety and derating factors; and the effects of constructional methods on reliability. Subsequent chapters cover environmental effects on reliability; improved reliability through microelectronics or integrated circuits; and failure rates for electronic components. Each chapter concludes with questions to enable students to test their understanding of the topics discussed. This book offers students an introduction to the subject of reliability in a form that is easily assimilated. It also serves as a reference to the various aspects contributing towards increased reliability of both electronic equipment and complete systems.

  • Electronic Inventions and Discoveries

    Electronics from Its Earliest Beginnings to the Present Day
    • 3 Edición
    • G. W. A. Dummer
    • Inglés
    Electronic Inventions and Discoveries: Electronics from Its Earliest Beginnings to the Present Day provides a summary of the development of the whole field of electronics. Organized into 13 chapters, the book covers and reviews the history of electronics as a whole and its aspects. The opening chapter covers the beginnings of electronics, while the next chapter discusses the development of components, transistors, and integrated circuits. The third chapter tackles the expansion of electronics and its effects on industry. The succeeding chapters discuss the history of the aspects of electronics, such as audio and sound reproduction, radio and telecommunications, radar, television, computers, robotics, information technology, and industrial and other applications. Chapter 10 provides a lists of electronic inventions according to subject, while Chapter 11 provides a concise description of each invention by date order. Chapter 12 enumerates the inventors of electronic devices. The last chapter provides a list of books about inventions and inventors. This book will appeal to readers who are curious about the development of electronics throughout history.

  • Electrons, Neutrons and Protons in Engineering

    A Study of Engineering Materials and Processes Whose Characteristics May Be Explained by Considering the Behavior of Small Particles When Grouped Into Systems Such as Nuclei, Atoms, Gases, and Crystals
    • 1 Edición
    • J. R. Eaton
    • Inglés
    Electrons, Neutrons and Protons in Engineering focuses on the engineering significance of electrons, neutrons, and protons. The emphasis is on engineering materials and processes whose characteristics may be explained by considering the behavior of small particles when grouped into systems such as nuclei, atoms, gases, and crystals. This volume is comprised of 25 chapters and begins with an overview of the relation between science and engineering, followed by a discussion on the microscopic and macroscopic domains of matter. The next chapter presents the basic relations involving mechanics, electricity and magnetism, light, heat, and related subjects which are most significant in the study of modern physical science. Subsequent chapters explore the nucleus and structure of an atom; the concept of binding forces and binding energy; the configuration of the system of the electrons surrounding the atomic nucleus; physical and chemical properties of atoms; and the structure of gases and solids. The energy levels of groups of particles are also considered, along with the Schrödinger equation and electrical conduction through gases and solids. The remaining chapters are devoted to nuclear fission, nuclear reactors, and radiation. This book will appeal to physicists, engineers, and mathematicians as well as students and researchers in those fields.

  • Friction and Wear

    Calculation Methods
    • 1 Edición
    • I V Kragelsky + 2 más
    • Inglés
    Friction and Wear: Calculation Methods provides an introduction to the main theories of a new branch of mechanics known as ""contact interaction of solids in relative motion."" This branch is closely bound up with other sciences, especially physics and chemistry. The book analyzes the nature of friction and wear, and some theoretical relationships that link the characteristics of the processes and the properties of the contacting bodies essential for practical application of the theories in calculating friction forces and wear values. The effect of the environment on friction and wear is also considered. Finally, the requirements, which must be fulfilled by the physicomechanical properties of the materials of which contacting bodies are made and which determine their behavior in moving contacts, are formulated. The book will be of interest to a wide circle of readers, e.g. engineers, designers, machine users, and research workers, working on the production of wear-resistant materials and working on the nature of friction and wear.

  • Ergonomics Problems in Process Operations

    Organised by the Institution of Chemical Engineers in Association with the Ergonomics Society. Held at the University of Aston in Birmingham, 11-13 July 1984
    • 1 Edición
    • Sam Stuart
    • Inglés
    Ergonomics Problems in Process Operations documents the proceedings of a symposium organized by the Institution of Chemical Engineers in association with the Ergonomics Society, held at the University of Aston in Birmingham, on 11-13 July 1984. The objectives of the symposium are: to enable engineers from process, power, and offshore industries to exchange information and experience with ergonomics specialists; to discuss ergonomics problems in process operations and methods of recognizing and controlling these problems; and to explore effective ways of applying ergonomics research to solving process operations problems. The symposium is intended to appeal to operations and maintenance managers, equipment designers and project engineers, designers and managers of pilot scale R & D plants, and ergonomists. The presentations in this volume are organized into three parts. Part 1 contains papers on the role of the human operator. Also included are contributions during workshops on the effects of monotony and reduced activity in automated plant monitoring and human reliability assessment techniques. Part 2 contains papers on interface design and contributions during workshops on expert systems applications and ergonomics implications of computer-based display and control systems. Part 3 deals with studies on job design, organization, and training.

  • Practical Electronics Handbook

    • 4 Edición
    • Ian Sinclair
    • Inglés
    This is the best value handbook on electronics you can buy. With new chapters and sections covering topics such as sensing components, connectors, soldering and unsoldering, this fourth edition contains all of the everyday information that anyone working in electronics will need. It provides a practical and comprehensive collection of circuits, rules of thumb and design data for professional engineers, students and enthusiasts, and therefore enough background to allow the understanding and development of a range of basic circuits.

  • Data for Science and Technology

    Proceedings of the Seventh International CODATA Conference, Kyoto, Japan, 8-11 October 1980
    • 1 Edición
    • Phyllis S. Glaeser
    • Inglés
    Data for Science and Technology covers the proceedings of the Seventh International CODATA Conference. This text is comprised of 133 chapters with a total of 180 papers from 400 hundred authors, which cover CODATA concerned with environmental and energy questions along with problems of data banking and telecommunications network operations. This book provides valuable assessment of data and points out alternatives, trends, and requirements for the future, such as production and use of data in pure applied sciences; data for the development of human settlements in a dynamic world; informatical analysis of scientific research activities; and data on our evolutionary heritage. Researchers from all scientific fields will find this book a great source reference material, since it presents research from various disciplines.

  • CCTV Surveillance

    Video Practices and Technology
    • 1 Edición
    • Bozzano G Luisa
    • Inglés

  • Mechanics Today

    Pergamon Mechanics Today Series, Volume 4
    • 1 Edición
    • S. Nemat-Nasser
    • Inglés
    Mechanics Today, Volume 4 focuses on solid mechanics and applied mathematics. This book is divided into six chapters. Chapter I provides a general description of the basic features and relevant concepts of mixed boundary-value problems in mechanics. The problem of crack extension in a solid under arbitrary loads is discussed in Chapter II, emphasizing the crack growth that leads from a planar to a nonplanar configuration. The third chapter reviews various methods of solving the scattering of elastic waves by inclusions. The interactions of electromagnetic field with deformable bodies in motion are elaborated in Chapter IV, while problems involving solids carrying high electric currents or being placed in high magnetic fields are deliberated in Chapter V. The last chapter concentrates on the implications of the second law of thermodynamics, and consequences of thermodynamic material stability and its corresponding restrictions on the evolutionary equations for internal variables. This publication is useful to specialists, but is also beneficial to non-experts with sufficient background in applied mechanics.

  • Elasticity

    Theory and Applications
    • 1 Edición
    • Adel S. Saada
    • Thomas F. Irvine + 2 más
    • Inglés
    Elasticity: Theory and Applications reviews the theory and applications of elasticity. The book is divided into three parts. The first part is concerned with the kinematics of continuous media; the second part focuses on the analysis of stress; and the third part considers the theory of elasticity and its applications to engineering problems. This book consists of 18 chapters; the first of which deals with the kinematics of continuous media. The basic definitions and the operations of matrix algebra are presented in the next chapter, followed by a discussion on the linear transformation of points. The study of finite and linear strains gradually introduces the reader to the tensor concept. Orthogonal curvilinear coordinates are examined in detail, along with the similarities between stress and strain. The chapters that follow cover torsion; the three-dimensional theory of linear elasticity and the requirements for the solution of elasticity problems; the method of potentials; and topics related to cylinders, disks, and spheres. This book also explores straight and curved beams; the semi-infinite elastic medium and some of its related problems; energy principles and variational methods; columns and beam-columns; and the bending of thin flat plates. The final chapter is devoted to the theory of thin shells, with emphasis on geometry and the relations between strain and displacement. This text is intended to give advanced undergraduate and graduate students sound foundations on which to build advanced courses such as mathematical elasticity, plasticity, plates and shells, and those branches of mechanics that require the analysis of strain and stress.

  • Compliant Offshore Structures

    • 1 Edición
    • Minoo H Patel + 1 más
    • Inglés
    Compliant Offshore Structures deals with some aspects of the mechanics of compliant offshore structures. Analysis methods for determining the hydrostatic and hydrodynamic behavior, at wave frequencies only, of conventional and novel compliant structure types are described. The contribution of hull configuration for tandem hull vessels and of pneumatic compliances for ship shape and semi-submersible vessels is also emphasized. Comprised of 11 chapters, this book begins with an overview of the various conventional and emerging methods of hydrostatic and hydrodynamic analysis that are available for characterizing compliant marine structures. The response of compliant structures to ocean waves is given emphasis, along with the hydrostatic stability of a compliant vessel. The discussion then turns to the use of analysis methods for a variety of conventional and novel compliant structures such as semi-submersibles, ship forms, tensioned buoyant platforms, crane vessels, and vertical marine risers. However, those compliant structures that are believed to have a future application or, alternatively, are useful in illustrating an interesting performance feature are also considered. Among such structures are those with articulated joints, pneumatic compliances, and tandem hull marine vehicles. This monograph is intended for practicing engineers as well as undergraduate and postgraduate students.

Temas relacionados