Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Magnetic Materials in Japan

    Research, Applications and Potential
    • 1 Edición
    • Japan Technical Information Japan Technical Information Se
    • Inglés
    Please note this is a Short Discount publication.This, the third report in Elsevier's Materials Technology in Japan series, concentrates on magnetic materials as a topic gaining worldwide attention, and each chapter looks not only at current research, but also describes the technology as it is being applied and its future potential.Magnetic–r... research is the second largest field of research in Japan after semiconductors, with the estimated number of researchers and engineers engaged in magnetics–related activities currently at 20,000. This research report serves as both a review of research undertaken and developments to date, and a forecast of where the industry is going.

  • Stability, Bifurcation and Postcritical Behaviour of Elastic Structures

    • 1 Edición
    • Volumen 39
    • M. Pignataro + 2 más
    • Inglés
    A comprehensive and systematic analysis of elastic structural stability is presented in this volume. Traditional engineering buckling concepts are discussed in the framework of the Liapunov theory of stability by giving an extensive review of the Koiter approach. The perturbation method for both nonlinear algebraic and differential equations is discussed and adopted as the main tool for postbuckling analysis. The formulation of the buckling problem for the most common engineering structures - rods and frames, plates, shells, and thin-walled beams, is performed and the critical load evaluated for problems of interest. In many cases the postbuckling analysis up to the second order is presented. The use of the Ritz-Galerkin and of the finite element methods is examined as a tool for approximate bifurcation analysis. The volume will provide an up-to-date introduction for non-specialists in elastic stability theory and methods, and is intended for graduate and post-graduate students and researchers interested in nonlinear structural analysis problems. Basic prerequisites are kept to a minimum, a familiarity with elementary algebra and calculus is all that is required of readers to make use of this book.

  • Experimental Mechanics

    Proceedings of the First International Congress on Experimental Mechanics Held in New York, November 1-3, 1961
    • 1 Edición
    • B. E. Rossi
    • Inglés
    Experimental Mechanics presents the proceedings of the First International Congress on Experimental Mechanics, held at the Hotel New Yorker in New York City, on November 1–3, 1961. This book presents the application of the methods of experimental mechanics to technical problems. Organized into 21 chapters, this compilation of papers begins with an overview of the experimental techniques developed for different basic and applied research on strength of materials, performance of hydraulic machinery, and accuracy of mechanisms and machine tools. This text then surveys the developments in the field of mechanical measurements, including rubber gage, bolt gage, digital strain indicators, and waterproofed strain gage. Other chapters consider the experimental study of the transient response of a rocket sled with a vertically malaligned center of gravity. The final chapter deals with the conditions of collapse of stiffened cylindrical shells beyond the proportional limit of the material. Experimental stress analysts will find this book useful.

  • Theory and Fundamental Research in Heat Transfer

    Proceedings of the Annual Meeting of the American Society of Mechanical Engineers New York, November 1960
    • 1 Edición
    • J. A. Clark
    • Inglés
    Theory and Fundamental Research in Heat Transfer focuses on the processes, methodologies, reactions, and mechanisms involved in heat transfer. The selection first offers information on thermal radiation characteristics of surfaces, including intensity of radiation, intensity of emission and angular emittance, reflectance relationships, diffuse reflector, hemispherical and total reflectances, reflectivity of homogeneous isotropic polished surfaces, and angular total remittance measurements. The text then takes a look at heat transfer in rarefied gas flow, as well as accommodation coefficient and free molecule transfer, near free molecule heat transfer, continuum heat transfer regimes, and transitional regime. The publication ponders on boiling heat transfer and plasma heat transfer. Turbulent heat transfer in stratified flow, thermal conductivity of solids, and studies on quantitative spectroscopy and gas emissivities are also discussed. Topics include emissivity calculations, mechanisms of thermal conductivity, and conductivity at low and intermediate temperatures. The selection is a dependable reference for readers interested in the processes, reactions, and mechanisms involved in heat transfer.

  • Advances in Factories of the Future, CIM and Robotics

    • 1 Edición
    • Volumen 16
    • M. Cotsaftis + 1 más
    • Inglés
    Productivity enhancement is a major concern for all manufacturing enterprises. Productivity enhancement can be achieved in many ways and many facets of its problems have been investigated over the last decades. A number of methods, tools and technologies have emerged to efficiently increase productivity and rationalize management of manufacturing enterprises. International experts from both academia and industry share their experiences in this collection of articles, contributing to the latest advances in the many facets of productivity enhancement in manufacturing enterprises. Themes and visions are detailed on factories of the future, new management approaches, manufacturing system integration and manufacturing information systems. These technical areas can be grouped into four major sections: Factories of the future; Techniques and tools for automated manufacturing; Robotics; and Industrial applications. The papers illustrate a pattern of valuable and interesting approaches to the fascinating problem of designing a new generation of robots with high enough performance capabilities to be used in an industrial context.

  • CAD International Directory 1986

    • 1 Edición
    • Alison Smith
    • Inglés
    CAD International Directory 1986 is part of a series of directories of products and suppliers in the field of computer-aided design (CAD). It aims to be an invaluable buyer's guide and a useful all-year-round reference book that tells users who sells what in their field of interest and where to contact them. The directory begins with four chapters that survey the current state of the CAD field and discuss developments in CAD and computer-aided engineering (CAE); factors to consider in workstation selection; and future developments in the CAD environment. The remainder of the book contains the directory of CAD products and services, which is divided into eight sections. All entries in every section but Section 1 are listed and indexed in alphabetical order of supplier. The software section is listed in alphabetical order of program name and is indexed by both supplier and program name. The suppliers' names, addresses, telephone and telex numbers are listed at the end of the directory.

  • Hovercraft Technology, Economics and Applications

    • 1 Edición
    • Volumen 11
    • J.R. Amyot
    • Inglés
    The amphibious versatility, marine speed and low footprint pressure have given the hovercraft a role in specialized applications. Among them are search and rescue, emergency medical services, military and arctic operations, icebreaking, patrol, law enforcement, ferries, and recreational activities such as racing. To meet these demands, the hovercraft has undergone considerable development since its inception. A comprehensive and timely review of the analysis, design, operation, economics and applications of hovercraft is presented in this volume by a team of highly qualified experts. The topics covered range from first principles to the state-of-the-art, with extensive references to current literature. The overall presentation is intended not to exceed the final year level of undergraduate engineering. The introduction and summary sections of all chapters are intended to give a qualitative grasp of the material covered without having to read all the technical portions.In varying degrees, the volume will appeal to managers, decision-support staff, operators, technologists, undergraduate students, and anyone entering the hovercraft field or seeking an introduction to it. It will also be of interest to design engineers, researchers and graduate students. Thus, this volume can serve as an up-to-date reference on several important aspects of hovercraft for a wide range of readers.

  • Advances in Measurement and Control of Colloidal Processes

    • 1 Edición
    • R. A. F. Williams + 1 más
    • Inglés
    Advances in Measurement and Control of Colloidal Processes compiles a selection of papers presented at the International Symposium on Colloid and Surface Engineering held in San Diego in August 1990. This book emphasizes practical measurement and exploitation of the principles of surface and interface science that embrace a wide range of industrial sectors. The topics are arranged according to specific measurement techniques or phenomena. The focus includes processing and characterization of aggregated materials; developments in instrumentation for monitoring and characterization of dispersions; controlled particle formation technologies; mineral and inorganic colloids-micro and macroscopic characterization methods; measurement and simulation of complex colloidal processes; and advances and problems in micron and sub-micron sizing techniques. This text is a useful reference for engineering students and industrial practitioners who conduct research on colloid and surface engineering.

  • Composite Materials

    A Directory of European Research
    • 1 Edición
    • A. R. Bunsell + 1 más
    • Inglés
    Composite Materials: A Directory of European Research is a directory of individuals, research establishments (academic, independent, and industrial), and research topics related to composite materials. The directory is divided into 10 sections, each of which represents nine European countries (Great Britain, France, Italy, Belgium, Netherlands, Denmark, Sweden, Germany, and Norway), and published in English, French, and German. The first section lists the names of people involved in research and development work involving composite materials, as well as the name of the establishment where the person is employed. Each name is assigned a unique four-digit code that provides a cross-reference to the second section. The second section lists the establishments with full postal addresses, each with a numerical code that identifies individual research staff (from the previous section); the number of research personnel associated with the named individual working on composite materials; the type of organization (academic, independent, or industrial); and whether or not the establishment accepts contract research. The remaining sections provide details of research topics and activities covered by the people listed in the first section, including fibers (monofilaments and bundles), types of composites, matrix, physical and mechanical testing, fabrication and processing, non-destructive testing, and applications. This monograph will be useful to those working in, or entering, the field of composites.

  • Arctic Communications

    Proceedings of the Eighth Meeting of the AGARD Ionospheric Research Committee, Athens, Greece, July 1963
    • 1 Edición
    • B. Landmark
    • Inglés
    Arctic Communications is a compilation of the proceedings of the Eighth Meeting of the Ionospheric Research Committee of NATO's Advisory Group for Aeronautical Research and Development, held in Athens, Greece in July 1963. The meeting provided a forum for discussing advances in communications equipment used to conduct research in the Arctic and covered a wide range of topics such as the physical properties of the Arctic ionosphere; Arctic high-frequency communications; soundings and field strength measurements; and observations in the Arctic during nuclear tests. This book is comprised of 25 chapters and begins with a discussion on experimental studies of high latitude absorption phenomena, including auroral absorption, polar cap absorption, and sudden commencement absorption. Direct measurements of D-region electron densities during the absorption periods are also presented. Subsequent chapters focus on the ionospheric absorption of cosmic noise observed at geomagnetically conjugate points; ionospheric ionization produced by solar flares; military communication facilities in the Canadian Arctic; and radio noise problems in Arctic regions. Phase instabilities on a very-low-frequency transmission path passing through the auroral zone are also considered. This monograph will be of particular value to scientists and researchers with interest in the Arctic.

  • Fault Detection & Reliability

    Knowledge Based & Other Approaches
    • 1 Edición
    • M.G. Singh
    • Inglés
    Provides an up-to-date review of the latest developments in system reliability maintenance, fault detection and fault-tolerant design techniques. Topics covered include reliability analysis and optimization, maintenance control policies, fault detection techniques, fault-tolerant systems, reliable controllers and robustness, knowledge based approaches and decision support systems. There are further applications papers on process control, robotics, manufacturing systems, communications and power systems. Contains 36 papers.

  • Combustion Chambers for Jet Propulsion Engines

    International Series of Monographs in Aeronautics and Astronautics
    • 1 Edición
    • V. S. Zuyev + 1 más
    • B. P. Mullins
    • Inglés
    Combustion Chambers for Jet Propulsion Engines focuses on the design of combustion chambers for turbo-jet and ramjet engines, including reheat systems. This compilation, which is a training manual for the combustion chamber course held in the Moscow Aeronautical Institute, provides a general presentation of the basic elements of the process of operation, characteristics, and design of combustion chambers. This manual is divided into two parts. Part One discusses the elements of chemical kinetics and the theory of combustion of a homogeneous mixture in gas streams. The second part is devoted to the thermodynamics of the combustion chamber; aerodynamic and thermal losses; construction of the combustion chamber; and description of the operating process. The problem concerning the effect of losses in combustion chambers on the characteristics of jet propulsion engines is also elaborated in this text. This publication is valuable to aeronautical and combustion engineering students.

  • Electrical Safety Engineering

    • 3 Edición
    • W Fordham Cooper
    • Inglés
    Electrical Safety Engineering, Third Edition covers the scientific principles, legislation, guidelines, and standards of electrical safety. This book is organized into six parts encompassing 20 chapters. Part 1 considers the nature of electrical injuries, the mechanical causes of electrical failures, and electrical insulation failure. Parts 2 and 3 describe the mechanism of breakdown and failure of electrical equipment, as well as the concept of circuit protection, with emphasis on the earthing principles and double insulation. Parts 4 and 5 explore the principles and application of electronic and solid-state control systems, fires, and explosion hazards. Part 6 focuses on the industrial supply and distribution of current and voltage. This book will prove useful to electrical engineers, electricians, and technicians.

  • Knowledge Engineering and Computer Modelling in CAD

    Proceedings of CAD86 London 2 — 5 September 1986
    • 1 Edición
    • Alison Smith
    • Inglés
    Knowledge Engineering and Computer Modelling in CAD covers the proceedings of CAD86, The Seventh International Conference on the Computer as a Design Tool. The book presents 49 papers that are organized into 14 parts according to their respective themes. The main themes of the conference are modeling and expert systems. Materials covering database, control, and geometric modeling are also presented. The coverage of the text includes expert systems in process planning; selections and evaluation of cost-effective CAD systems; and designing complex artifacts with the assistance of a microcomputer-based system. The book will be of great use to researchers and practitioners whose work involves the utilization of CAD.

  • Developments in Theoretical and Applied Mechanics

    Proceedings of the Third Southeastern Conference on Theoretical and Applied Mechanics
    • 1 Edición
    • W. A. Shaw
    • Inglés
    Developments in Theoretical and Applied Mechanics, Volume 3 presents papers on the proceedings of the Third Southeastern Conference on Theoretical and Applied Mechanics held in Columbia, S. Carolina on March 31-April 1, 1966. The book covers papers in the areas of continuum mechanics, elasticity, plates and shells, applied mechanics, experimental mechanics, wave propagation, dynamics, vibrations, and fluid mechanics. Physical chemists and mechanical engineers will find the book invaluable.

  • European Electronics Directory 1994

    Systems and Applications
    • 1 Edición
    • C.G. Wedgwood
    • Inglés
    Companion volume to Components and Sub-Assemblies Directory, providing access to 8000 manufacturers, agents and representatives of electronics systems and equipment. Entries include names of key managers, addresses, fax/telephone numbers, and pocket descriptions of manufacturing and sales programmes. There is also a product index to track the companies involved in any given business lines.

  • Heat Pumps

    • 1 Edición
    • Kazimierz Brodowicz + 3 más
    • Inglés
    Heat pumps and related technology are in widespread use in industrial processes and installations. This book presents a unified, comprehensive and systematic treatment of the design and operation of both compression and sorption heat pumps. Heat pump thermodynamics, the choice of working fluid and the characteristics of low temperature heat sources and their application to heat pumps are covered in detail.Economic aspects are discussed and the extensive use of the exergy concept in evaluating performance of heat pumps is a unique feature of the book. The thermodynamic and chemical properties of certain new working fluids and sorbents are also explored.There are considerable pressures on those involved in the use of heat pumps to achieve energy savings and this presents a challenging task in today's industrial climate. This book provides many examples of such energy savings such as the use of large heat pump units utilising various low temperature industrial waste heat sources. Heat Pumps is illustrated throughout by specific solutions as applied worldwide. The subject area is approached logically, covering both design and calculation methods, and is oriented towards the needs of the process user. The treatment given to the selection of working fluids should be compulsory reading. - Chemical Engineer, June 1994

  • Electric Motor Handbook

    • 1 Edición
    • B. J. Chalmers
    • Inglés
    Electric Motor Handbook aims to give practical knowledge in a wide range of capacities such as plant design, equipment specification, commissioning, operation and maintenance. The book covers topics such as the modeling of steady-state motor performance; polyphase induction, synchronous, and a.c. commutator motors; ambient conditions, enclosures, cooling and loss dissipation; and electrical supply systems and motor drives. Also covered are topics such as variable-speed drives and motor control; materials and motor components; insulation types, systems, and techniques; and the installation, site testing, commissioning, and maintenance. The text is recommended for engineers who are in need of a convenient guide in the installation, usage, and maintenance of electric motors.

  • Dynamic Behavior of Concrete Structures

    • 1 Edición
    • Volumen 44
    • Y.L. Mo
    • Inglés
    This book is concerned with the dynamic behavior of reinforced/prestress... concrete structures, such as: buildings and bridges. It discusses how to predict or check the real inelastic behavior of concrete structures subjected to dynamic loads, including equipment loads, earthquake motions, seismic interactions and missile impacts. A number of techniques have recently been developed to assist in evaluating such occurrences. This book is intended to apply structural dynamics to concrete structures and is appropriate as a textbook for an introductory course in dynamic behavior of concrete structures at the upper-undergraduate or graduate level as well as for practicing engineers.

  • Dynamics and Thermodynamics in Hierarchically Organized Systems

    Applications in Physics, Biology and Economics
    • 1 Edición
    • Volumen 4
    • P. Auger
    • George J. Klir
    • Inglés
    One of the most fundamental and efficient ways of conceptualizing complex systems is to organize them hierarchically. A hierarchically organized system is represented by a network of interconnected subsystems, each of which has its own network of subsystems, and so on, until some elementary subsystems are reached that are not further decomposed. This original and important book proposes a general mathematical theory of a hierarchical system and shows how it can be applied to very different topics such as physics (Hamiltonian systems), biology (coupling the molecular and the cellular levels), ecology (coupling the individual, population and ecosystem), and economics (coupling the sectoral, regional and national levels). The first attempt to develop mathematical frameworks for conceptualizing such systems only appeared in the early 1970s, and it took another decade before these mathematical frameworks were applied to various specific contexts of the sciences of the natural. Much of this work has been pioneered by the author, and he presents a more thorough work which will have a major impact on shifting current thinking in the sciences of the natural to a more holistic basis in which several levels of hierarchically organized systems are viewed in an integrated fashion.

  • Advances in Research on the Strength and Fracture of Materials

    An Overview
    • 1 Edición
    • D.M.R. Taplin
    • Inglés
    Advances in Research on the Strength and Fracture of Materials: Volume 1s—An Overview contains the proceedings of the Fourth International Conference on Fracture held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to fracture in a wide range of materials such as metals and alloys, polymers, ceramics, and composites. This volume is comprised of 40 chapters and opens with a discussion on progress in the development of elementary fracture mechanism maps and their application to metal deformation processes, along with micro-mechanisms of fracture and the fracture toughness of engineering alloys. The next section is devoted to the fracture of large-scale structures such as steel structures, aircraft, cargo containment systems, nuclear reactors, and pressure vessels. Fracture at high temperatures and in sensitive environments is then explored, paying particular attention to creep failure by cavitation under non-steady conditions; the effects of hydrogen and impurities on brittle fracture in steel; and mechanism of embrittlement and brittle fracture in liquid metal environments. The remaining chapters consider the fracture of non-metallic materials as well as developments and concepts in the application of fracture mechanics. This book will be of interest to metallurgists, materials scientists, and structural and mechanical engineers.

  • Revitalizing US Electronics

    Lessons from Japan
    • 1 Edición
    • John Sprague
    • Inglés
    Written by one of the few executives who have extensive experience in the electronics industry in both the US and Japan, this book compares market research, design, and manufacturing techniques as used in both countries. Unlike other books on theJapanese business culture, Sprague gives specific advice and recommendations about what companies can do now to compete with Japan, clearly pointing out what is and what is not adaptable from the Japanese approach to business.

  • Logistical Excellence

    It's Not Business As Usual
    • 1 Edición
    • Donald J. Bowersox
    • Inglés
    Benefit from the practices of the best logistics managersOne of the nation's top authorities on logistics management presents a focused interpretation of research findings to help managers improve logistical competency within their organizations. Zeroing in on the best practices of successful logistic managers - and well supported by statistical evidence this handbook provides a sequential model as well as extensive coverage of Electronic Data Interchange in the logistics process. You'll find out why logistics must play an increasingly critical role in overall corporate strategy in the coming years, and why its managers must learn to better manage change. Special emphasis is placed on the development of strategic alliances to increase corporate speed and quality. Throughout the eight chapters, an action-oriented case dialogue facilitates interest and ease of reading.

  • Probabilistic Approach to Mechanisms

    • 1 Edición
    • Volumen 8
    • B.Z. Sandler
    • Inglés
    This book discusses the application of probabilistics to the investigation of mechanical systems. The book shows, for example, how random function theory can be applied directly to the investigation of random processes in the deflection of cam profiles, pitch or gear teeth, pressure in pipes, etc. The author also deals with some other technical applications of probabilistic theory, including, amongst others, those relating to pneumatic and hydraulic mechanisms and roller bearings. Many of the aspects are illustrated by examples of applications of the techniques under discussion.

  • Electrical Principles and Technology for Engineering

    • 1 Edición
    • John Bird
    • Inglés
    The aim of this book is to introduce students to the basic electrical and electronic principles needed by technicians in fields such as electrical engineering, electronics and telecommunications. The emphasis is on the practical aspects of the subject, and the author has followed his usual successful formula, incorporating many worked examples and problems (answers supplied) into the learning process.Electrical Principles and Technology for Engineering is John Bird's core text for Further Education courses at BTEC levels N11 and N111 and Advanced GNVQ. It is also designed to provide a comprehensive introduction for students on a variety of City & Guilds courses, and any students or technicians requiring a sound grounding in Electrical Principles and Electrical Power Technology.

  • Newnes Electronics Assembly Handbook

    • 1 Edición
    • Keith Brindley
    • Inglés
    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are described. The book also underscores testing for quality. Reliability, component parts testing, production processes, and the packaged and unpackaged assemblies are discussed. The text also examines standardization of electronics manufacture. Reference to standards, standards of organizations and bodies, assessed quality of companies, and setting up of company standards are considered. The book also discusses the process of selling to the Ministry of Defense. Procurement executive, quality assurance, and procurement executive policies and procedures are clarified. The handbook is a helpful reference for readers wanting to study the processes involved in electronic assembling.

  • Pressuremeter Testing

    Methods and Interpretation
    • 1 Edición
    • R. J. Mair + 1 más
    • Inglés
    Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.

  • Plastic Deformation of Materials

    Treatise on Materials Science and Technology, Vol. 6
    • 1 Edición
    • R. J. Arsenault
    • Inglés
    Treatise on Materials Science and Technology, Volume 6: Plastic Deformation of Materials covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book presents articles on the low temperature of deformation of bcc metals and their solid-solution alloys; the cyclic deformation of metals and alloys; and the high-temperature diffusion-controlled creep of some metals and alloys, with particular reference to the various creep mechanisms. The text also includes articles on superplasticity; the fatigue deformation of polymers; the low temperature deformation of crystalline nonmetals; and the recovery and recrystallization during high temperature deformation. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Supersheds

    The Architecture of Long-Span, Large-Volume Buildings
    • 1 Edición
    • Chris Wilkinson
    • Inglés
    Supersheds: The Architecture of Long-Span, Large-Volume Buildings deals with large single-volume buildings known as supersheds. This book explains and catalogues the changes in modern architecture of supersheds and illustrates this with significant and important examples. This text is composed of six chapters. The first chapter gives a background of 19th century architecture that made possible great exhibition halls and long-spans of the railway era. The second chapter deals with another type of supershed: airship and aircraft hangars. In the third chapter, industrial architecture in Europe and in the U.S. during the early 20th century is examined. Examples of beautiful factories and building designs are mentioned, and the effects of World War II on the type of building constructions are also discussed. The fourth chapter traces the evolution of the well-serviced multi-use shed. The architecture of the extruded shed, the cool box, and special structures are described as well. The major influences that affected building design in the second half of the 20th century are mentioned as the machine transfer technology and computers. The fifth chapter explains the concept of ""more with less,"" where the task is to accomplish more with less material. Space structures, suspended roof structures, and air-supported structures are given as examples. The last chapter discusses the future of modern architecture along with new forms, materials, and technology, such as solid state chemistry, computers, and biotechnology. Architects, civil and construction engineers, architectural students, and the general public who has an interest in reading about large building designs and supersheds will find this book interesting.

  • Advances in Energy Systems and Technology

    Volume 3
    • 1 Edición
    • Peter Auer
    • Inglés
    Advances in Energy Systems and Technology: Volume 3 present articles that provides a critical review of specific topics within the general field of energy. It discusses the energy conservation in transportation. It addresses all modes of transportation in its discussion. Some of the topics covered in the book are the role of natural gas in domestic energy supplies, the tight gas formation, Devonian gas resources, and the theory of gas flow in porous media, a review of gas production mechanism, and the estimates of economically recoverable gas. The analysis of the methane from coal seams is covered. The technology and economics of geopressured energy production is discussed. The text describes the geopressured aquifers. The Mexican gas imports are presented. A chapter is devoted to the production of synthetic gas. Another section focuses on the conversion of methane from coalbeds and the effect of gas porosity. The book can provide useful information to scientists, engineers, students, and researchers.

  • Dictionary of the Printing and Allied Industries

    In English (with definitions), French, German, Dutch, Spanish and Italian
    • 2 Edición
    • F.J.M. Wijnekus + 1 más
    • Inglés
    The first edition of this dictionary, compiled by F.J.M. Wijnekus and published in 1967, was the result of years of systematic collection and preparation of thousands of terms and expressions which were until then not to be found in any other dictionary. The material was correlated for use in his daily work and, as the reputation of his private collection spread, there was an increasing demand for access to these findings. Until 1967 there was no comprehensive multilingual dictionary on the subject; former publications were incomplete and out of date and lacked clear definition - often leading to disastrous misunderstandings. Furthermore, the subject of printing, paper and ink technology had never been dealt with, in dictionary form, in relation to other aspects of the graphic industry.This new work, prepared by F.J.M. Wijnekus and his son, has been considerably up-dated. Much time has been devoted to checking the material against the most reliable and authoritative sources. The usefulness of the work has been further enhanced by the addition of Spanish and Italian to the original languages of English, French and German.The first edition was received with much enthusiastic praise and this new dictionary will undoubtedly continue to be an invaluable tool for all those working with the printed word in the widest sense. It is a reference work which should be in the hands of all those in any way connected with the printing industry, paper manufacturers, ink manufacturers, printers, bookbinders, publishers, lithographers, lay-out men and graphical research institutes.

  • An Introduction to Engineering Systems

    Pergamon Unified Engineering Series
    • 1 Edición
    • Samuel Seely
    • William F. Hughes + 2 más
    • Inglés
    An Introduction to Engineering Systems discusses important aspects of systems engineering. It provides a background of analytical methods appropriate to hand-solution and computer solutions and shows the correlation that exists in alternate formulation. The book begins with an introduction to models and modeling of system elements. It then discusses the equilibrium formulations, signal flow graphs, and geometrical constraints of interconnected systems. After exploring aspects of system response and behavior in the time domain, the analyzes system response in the frequency domain. It also describes Z-transform methods and their application to discrete and continuous time systems. Finally, the book presents several approaches for testing the stability of linear systems. The text will provide students essential understanding of important methods of modern systems analysis.

  • Proactive Maintenance for Mechanical Systems

    • 1 Edición
    • E.C. Fitch
    • Inglés
    Written by Dr. E.C. Fitch, the book contains over 340 double column pages which include 400 figures and tables, a comprehensive bibliography, and index. There is no root cause of mechanical failure, known to the author, that has been ignored or left out. Nowhere in the world is this information put together in such a concise and comprehensive manner, and the book will serve as a reference and guide to designers, practising engineers, maintenance technicians, plant managers and operators who must design, maintain and operate fluid–dependent mechanical systems.

  • Airport, Aircraft, and Airline Security

    • 2 Edición
    • Bozzano G Luisa
    • Inglés
    Airport, Aircraft, and Airline Security, 2ed is a comprehensive study of every aspect of modern aviation security. Topics are presented from a historical perspective and examined through a down-to-earth practical approach to solving current problems.

  • Fundamental Process Control

    Butterworths Series in Chemical Engineering
    • 1 Edición
    • David M. Prett + 1 más
    • Inglés
    Fundamental Process Control focuses on the fundamental nature of process control, which includes an extensive discussion on control methodologies. The first seven chapters are devoted to the development of a complete control problem formulation that contains all the elements of practical importance. Due to the novelty of these ideas, no rigorous mathematical proofs yet exist for the assertions made, although they have been verified through simulation and experience in practice. The concepts discussed in Chapters 8 and 9 contain ideas for future developments in process control that will trigger the imagination of researchers in the fields covered. This book requires a thorough grounding in both classical and modern control theory in order to grasp the material presented. This book is therefore not for casual readers, but rather is directed at those who are currently, or those who desire to develop into, control design experts. Within the academic community, this book is ideal for the graduate level and for those academics pursuing fundamental research topics in process control.

  • Engineering Properties of Soils and Rocks

    • 2 Edición
    • F. G. Bell
    • Inglés
    Engineering Properties of Soils and Rocks, Second Edition provides a survey of the engineering properties of the major types of soil and rock. The book is comprised of nine chapters that tackle the various aspects of soils and rocks. Chapter 1 covers the origin of soil and the basis of soil classifications. Chapters 2 to 5 discuss the different types of soils, such as coarse grained soils, cohesive soils, and organic soils. Chapter 6 deals with the engineering behavior of rock masses, while Chapter 7 talks about the engineering classifications of weathered rocks and rock masses. Chapter 8 discusses the engineering properties of rocks, and Chapter 9 covers subsurface waters and ground conditions. The text will be of great use to both undergraduate students and practitioners of engineering geology, civil engineering, and mining engineering.

  • Full-Scale Fatigue Testing of Components and Structures

    • 1 Edición
    • K. J. Marsh
    • Inglés
    Full-scale Fatigue Testing of Components and Structures presents the approaches to the testing of full-scale components or structures. The book begins by examining the necessity or desirability of full-scale fatigue testing. Subsequent chapters are devoted to the discussion of fatigue testing done on aircraft structures, railway components, helicopter rotor heads, artillery gun structures, and bridge components. The role of full-scale fatigue testing on automotive components and systems, structural testing in nuclear engineering, and the use of a structural fatigue testing laboratory for other tests are covered as well. Engineers, materials scientists, and researchers in the field of fatigue testing will find the book very useful.

  • Nonlinear Fiber Optics

    Formerly Quantum Electronics
    • 2 Edición
    • Govind P. Agrawal
    • Paul F. Liao
    • Inglés
    The field of nonlinear fiber optics has grown substantially since the First Edition of Nonlinear Fiber Optics, published in 1989. Like the First Edition, this Second Edition is a comprehensive, tutorial, and up-to-date account of nonlinear optical phenomena in fiber optics. It synthesizes widely scattered research material and presents it in an accessible manner for students and researchers already engaged in or wishing to enter the field of nonlinear fiber optics. Particular attention is paid to the importance of nonlinear effects in the design of optical fiber communication systems. This is a completely new book containing either new sections or major revisions in every chapter.

  • Regional Oceanography

    An Introduction
    • 1 Edición
    • Matthias Tomczak + 1 más
    • Inglés
    Covers the traditional range of topics in regional oceanography. An important aspect of work is its novel approach to a description of the features which give each ocean region its character. The two core principles are the use of the most modern database for all maps of regional distributions of properties and a discussion of all observed features within a frame of reference developed from ocean dynamics, rather than based on the simple geographical approach. The ocean's role in climate variability and climate change is described in detail. The book also includes an evaluation of all major international research projects such as FGGE, IIOE and TOGA. The SI system is used throughout. The use of modern data and inclusion of the oceanographic literature up to 1992 and early 1993 make it a useful reference text.

  • Finite Element and Finite Difference Methods in Electromagnetic Scattering

    • 1 Edición
    • M.A. Morgan
    • Inglés
    This second volume in the Progress in Electromagnetic Research series examines recent advances in computational electromagnetics, with emphasis on scattering, as brought about by new formulations and algorithms which use finite element or finite difference techniques. Containing contributions by some of the world's leading experts, the papers thoroughly review and analyze this rapidly evolving area of computational electromagnetics. Covering topics ranging from the new finite-element based formulation for representing time-harmonic vector fields in 3-D inhomogeneous media using two coupled scalar potentials, to the consideration of conforming boundary elements and leap-frog time-marching in transient field problems involving corners and wedges in two and three dimensions, the volume will provide an indispensable reference source for practitioners and students of computational electromagnetics.

  • Engineering Aspects of Shape Memory Alloys

    • 1 Edición
    • T W Duerig + 2 más
    • Inglés
    Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.

  • Managing High-Tech Start-Ups

    • 1 Edición
    • Duncan MacVicar + 1 más
    • Inglés
    Managing High-Tech Start-Ups equips engineers with a basic tool-kit for founding a high-tech manufacturing company. It gives would-be entrepreneurs insightful knowledge on how to attack such problems as developing a marketing plan, a sales plan, targets, pricing, hiring a sales force, evaluating marketing results, and correcting problems. The book emphasizes how to correctly identify a problem, so time is spent on its causes and not on its symptoms. Particular emphasis is placed on the marketing aspects of new engineering ventures, since marketing is usually not part of an engineer's experience, yet is so vital in the success or failure of a new venture. The authors take the reader step-by-step through the process of marketing evaluation and developing a product plan.

  • Pneumatic Conveying Design Guide

    • 1 Edición
    • David Mills
    • Inglés
    Pneumatic Conveying Design Guide is a guide for the design of pneumatic conveying systems and includes detailed data and information on the conveying characteristics of a number of materials with a wide range of properties. This book includes logic diagrams for design procedures and scaling parameters for the conveying line configuration. It also explains how to improve the performance of pneumatic conveyors by optimizing, uprating, and extending the system or adapting it for a change of material. This book consists of 15 chapters divided into three sections and opens with an overview of the state of the art on pneumatic conveying, along with definitions of the terms used in pneumatic conveying. The next chapter describes the various types of pneumatic conveying systems and the parameters that influence their capabilities in terms of material flow rate and conveying distance. The discussion then turns to feeding and discharging of the conveying line; selection of a pneumatic conveying system for a particular application; and design procedures for pneumatic conveying system. The theory and use of compressed air in pneumatic conveying are also considered, along with the effect of material properties on conveying performance; troubleshooting; and operational problems and some solutions. The final chapter is devoted to the use of bench-scale test methods to determine the material properties relevant to pneumatic conveying. This monograph is intended for designers and users of pneumatic conveying systems.

  • Computational Modeling for Fluid Flow and Interfacial Transport

    • 1 Edición
    • Volumen 5
    • W. Shyy
    • Inglés
    Transport processes are often characterized by the simultaneous presence of multiple dependent variables, multiple length scales, body forces, free boundaries and strong non-linearities. The various computational elements important for the prediction of complex fluid flows and interfacial transport are presented in this volume. Practical applications, presented in the form of illustrations and examples are emphasized, as well as physical interpretation of the computed results. The book is intended as a reference for researchers and graduate students in mechanical, aerospace, chemical and materials engineering.Both macroscopic and microscopic (but still continuum) features are addressed. In order to lay down a good foundation to facilitate discussion of more advanced techniques, the book has been divided into three parts. Part I presents the basic concepts of finite difference schemes for solving parabolic, elliptic and hyperbolic partial differential equations. Part II deals with issues related to computational modeling for fluid flow and transport phenomena. Existing algorithms to solve the Navier-Stokes equations can be generally classified as density-based methods and pressure-based methods. In this book the pressure-based method is emphasized. Recent efforts to improve the performance of the pressure-based algorithm, both qualitatively and quantitatively, are treated, including formulation of the algorithm and its generalization to all flow speeds, choice of coordinate system and primary velocity variables, issues of grid layout, open boundary treatment and the role of global mass conservation, convection treatment and convergence. Practical engineering applications, including gas-turbine combustor flow, heat transfer and convection in high pressure discharge lamps, thermal management under microgravity, and flow through hydraulic turbines are also discussed.Part III addresses the transport processes involving interfacial dynamics. Specifically those influenced by phase change, gravity, and capillarity are emphasized, and both the macroscopic and morphological (microscopic) scales are presented. Basic concepts of interface, capillarity, and phase change processes are summarized to help clarify physical mechanisms, followed by a discussion of recent developments in computational modeling. Numerical solutions are also discussed to illustrate the salient features of practical engineering applications. Fundamental features of interfacial dynamics have also been illustrated in the form of case studies, to demonstrate the interplay between fluid and thermal transport of macroscopic scales and their interaction with interfacial transport.

  • Composite Steel and Concrete Structural Members

    Fundamental Behaviour
    • 1 Edición
    • D.J. Oehlers + 1 más
    • Inglés
    This book deals with the analysis and behaviour of composite structural members that are made by joining a steel component to a concrete component. The emphasis of the book is to impart a fundamental understanding of how composite structures work, so engineers develop a feel for the behaviour of the structure, often missing when design is based solely by using codes of practice or by the direct application of prescribed equations. It is not the object to provide quick design procedures for composite members, as these are more than adequately covered by recourse to such aids as safe load tables. The subject should therefore be of interest to practising engineers, particularly if they are involved in the design of non-standard or unusual composite structures for buildings and bridges, or are involved in assessing, upgrading, strengthening or repairing existing composite structures. The fundamentals in composite construction are covered first, followed by more advanced topics that include: behaviour of mechanical and rib shear connectors; local buckling; beams with few shear connectors; moment redistribution and lateral-distortional buckling in continuous beams; longitudinal splitting; composite beams with service ducts; composite profiled beams and profiled slabs; composite columns; and the fatigue design and assessment of composite bridge beams.

  • Machinery Noise and Diagnostics

    • 1 Edición
    • Richard H Lyon
    • Inglés
    Machinery Noise and Diagnostics provides engineers with an understanding of how dynamic forces produce structural vibration in machines and how these vibrations are transmitted through the machine and produce radiated sound. The book presents the theoretical and practical aspects of machinery noise and diagnostics. The chapters contained in the text discuss subjects on the integration of noise reduction into the design process; sounds radiated by machines; the vibratory or acoustical signals picked up by a sensor and used for diagnostics; and other aspects of diagnostic procedures likely to be important in future machine monitoring systems. This publication will be of value to mechanical engineers, mechanics and machine designers.

  • High Power Lasers

    • 1 Edición
    • A. Niku-Lari + 1 más
    • Inglés
    The use of lasers for the working and treatment of materials is becoming increasingly common in industry. However, certain laser applications, for example, in welding, cutting and drilling, are more widely exploited than others. Whilst the potential of lasers for the surface treatment of metals is well recognised, in practice, this particular application is a relative newcomer. The 24 papers in this volume present the latest research and engineering developments in the use of lasers for processes such as surface melting, surface alloying and cladding, and machining, as well as discussing the properties of laser-treated materials.

  • Economic and Financial Justification of Advanced Manufacturing Technologies

    • 1 Edición
    • Volumen 14
    • Hamid R. Parsaei + 2 más
    • Inglés
    Competence in investment analysis is now a basic requirement for most practicing managers, engineers, and financial analysts in order to avoid possible serious mistakes arising from flawed or inadequate knowledge of the discipline. Furthermore, individuals who make decisions based on technical economics stake their professional futures, in many cases, on the accuracy of such evaluations.The aim of this volume is to provide a balanced view of the essential components of economic and financial analysis including: 1. Strategic and design issues; 2. Principles of cost management systems and activity-based costing, and; 3. Tools for developing the financial measures of investment worth, with advanced topics and case studies in these three areas.This volume provides a refreshing insight into the various methods that engineers, managers, and financial analysts may need to consider to find good alternatives for the investment of scarce resources. Not only are new ventures presented, but also improvements within existing facilities that include process modification, product design, equipment replacement, and plant expansion/contractio...

  • Plant Engineer's Reference Book

    • 1 Edición
    • DENNIS A SNOW
    • Inglés
    * Useful to engineers in any industry * Extensive references provided throughout * Comprehensive range of topics covered * Written with practical situations in mind A plant engineer is responsible for a wide range of industrial activities, and may workin any industry. The breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to certain subjects or cursory in their treatment of topics. The Plant Engineer's Reference Bookis the first volume to offer complete coverage of subjects of interest to the plant engineer. This reference work provides a primary source of information for the plant engineer. Subjects include selection of a suitable site for a factory and provisionof basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes). Detailed chapters deal with basic issues such as lubrication, corrosion, energy conservation, maintenance and materials handling aswell as environmental considerations, insurance matters and financial concerns. The authors chosen to contribute to the book are experts in their various fields. The Editor has experience of a wide range of operations in the UK, other Europeancountries, the USA, and elsewhere in the world. Produced with the backing of the Institution of Plant Engineers, this work is the primary source of information for plant engineers in any industry worldwide.

  • Advances in Energy Systems and Technology

    Volume 2
    • 1 Edición
    • Peter Auer
    • Inglés
    Advances in Energy Systems and Technology, Volume 2, is intended to furnish a detailed and critical review of timely topics within the general field of energy. The breadth of coverage is greater than that generally found in journal review articles. Thus, the collection of chapters contained within this serial will serve as a valuable reference work for an extended period of time. The book contains four chapters and opens with a discussion of the development of solar power satellites. This is followed by separate chapters on sea thermal power; the direct use of solar energy; and the rationale, structure, and use of models for energy technology assessment. This volume aims to continue attracting a wide audience, consisting of professional workers in the field, serious students at the graduate or advanced undergraduate level, as well as those policy analysts and energy planners who seek a more complete understanding of technical matters.

Temas relacionados