Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Chemical Metallurgy

    • 1 Edición
    • J. J. Moore + 2 más
    • Inglés
    Chemical Metallurgy provides an understanding of the fundamental chemical principles and demonstrates the application of these principles to process metallurgy and corrosion protection. The book discusses the fundamental chemical principles involved in metallurgical reactions. Since it is felt that the understanding of quantitative thermodynamics and its application to process metallurgy often prove to be a major problem area for students, example calculations and exercises are included at the end of each section in Chapter 2. The final three chapters deal with the applications of the chemical principles to the extraction and refining of metals, metal melting and recycling, and metallic corrosion. The book is intended as an introductory text for metallurgy students studying for first degrees, TEC higher diplomas and certificates, and Graduateship of the Institution of Metallurgists. It should also be of use to scientists and engineers entering employment in the metallurgical and metal finishing industries or the teaching profession.

  • Stress Analysis for Creep

    • 1 Edición
    • J.T. Boyle + 1 más
    • Inglés
    Stress Analysis for Creep focuses on methods on creep analysis. The book first ponders on the occurrence of creep in mechanical engineering components, including background to stress analysis for creep and general-purpose computer programs for creep analysis. The text presents a phenomenological description of creep. The phenomenon of creep, physical mechanisms of creep, convenient uniaxial constitutive relationships, and creep rupture are described. The book also explains simple component behavior, creep under multiaxial states of stress, and stress analysis for steady creep. The text focuses on reference stress methods in steady creep. Reference stresses for combined loading with a power law; non-isothermal power-law creep; reference temperatures; and approximate reference stress methods are elaborated. The text also focuses on stress analysis for transient creep; approximate solution of transient creep problems; and creep buckling and rupture. The text highlights the design for creep, including material data requirements and constitutive modeling for design; verification and qualification of stress analysis; and design methodology. The book is a good source of data for readers wanting to study creep analysis.

  • Introduction to Control Systems

    • 2 Edición
    • Volumen 8
    • D K Anand
    • Inglés
    This book is written for use as a text in an introductory course in control systems. The classical as well as the state space approach is included and integrated as much as possible. The first part of the book deals with analysis in the time domain. All the graphical techniques are presented in one chapter and the latter part of the book deals with some advanced material. It is intended that the student should already be familiar with Laplace transformations and have had an introductory course in circuit analysis or vibration theory. To provide the student with an understanding of correlation concepts in control theory, a new chapter dealing with stochastic inputs has been added. Also Appendix\A has been significantly expanded to cover the theory of Laplace transforms and z-transforms. The book includes worked examples and problems for solution and an extensive bibliography as a guide for further reading.

  • Plastics Materials

    • 5 Edición
    • J A Brydson
    • Inglés
    Plastics Materials, Fifth Edition, reviews developments of plastics materials. The 1980s saw the introduction of many new materials, some of which were highly specialized in their function, particularly in the field of electronics. The book attempts to take such developments into account. It also highlights the commercial importance of materials discussed and includes representative production or consumption statistics. The book begins by tracing the historical development of plastics materials. This is followed by separate chapters on the production of polymers via addition polymerization, condensation polymerization, and rearrangement polymerization; physical states of aggregation of polymers; factors affecting the thermal and mechanical properties of polymers; the relation of structure to the chemical, electrical, and optical properties of plastics; plastics additives; and principles of plastics processing. Subsequent chapters focus on the properties of individual plastics materials. These include polyethylene, polypropylene, vinyl chloride polymers, poly(vinyl acetate), acrylic plastics, polystyrene, vinyl thermoplastics, polyamides and polyimides, polyacetals and related materials, and polycarbonates.

  • Properties of Solid Polymeric Materials

    Treatise on Materials Science and Technology, Vol. 10
    • 1 Edición
    • J. M. Schultz
    • Inglés
    Treatise on Materials Science and Technology, Volume 10: Properties of Solid Polymeric Materials, Part A covers knowledge in the critical areas of polymeric materials. The book provides a background in polymer structure and morphogenesis, and discusses rubberlike elasticity, a phenomenon thermodynamically unique to long-chain polymers. The text also describes the mechanics of anisotropie, oriented polymeric systems and of glassy polymers. The fatigue behavior in solid polymers and the electrical properties of solid polymers are also reviewed. The book further tackles the electron processes and electrical breakdown in polymers. The text concludes with a discussion of the role of the environment on the integrity of polymeric solids. Materials scientists, materials engineers, and graduate students taking related courses will find the book useful.

  • Hydraulics and Pneumatics

    A technician's and engineer's guide
    • 1 Edición
    • Andrew Parr
    • Inglés
    Hydraulics and Pneumatics: A Technician's and Engineer's Guide provides an introduction to the components and operation of a hydraulic or pneumatic system. This book discusses the main advantages and disadvantages of pneumatic or hydraulic systems. Organized into eight chapters, this book begins with an overview of industrial prime movers. This text then examines the three different types of positive displacement pump used in hydraulic systems, namely, gear pumps, vane pumps, and piston pumps. Other chapters consider the pressure in a hydraulic system, which can be quickly and easily controlled by devices such as unloading and pressure regulating valves. This book discusses as well the importance of control valves in pneumatic and hydraulic systems to regulate and direct the flow of fluid from compressor or pump to the various load devices. The final chapter deals with the safe-working practices of the systems. This book is a valuable resource for process control engineers.

  • Merchant Ship Stability

    • 1 Edición
    • A.R. Lester
    • Inglés
    Merchant Ship Stability presents the theory and application of methods for maintaining ship stability. It serves as a textbook for deck officers and first year degree students. The book discusses the methods of Simpson's rules for measuring ship form, the principle of floatation, finding the position of the center of gravity, and the effect of the center of gravity of the vessel not being on the centerline, the effect of having liquids within the vessel which are free to move and the effect of suspending weights. Topics on the assessment of stability of large angles of heel, regulations about merchant vessel stability, and dry docking and grounding are provided as well. Deck officers and merchant marine students will find the book very useful.

  • Foundation Engineering in Difficult Ground

    • 1 Edición
    • F. G. Bell
    • Inglés
    Foundation Engineering in Difficult Ground discusses the different principles and practices involved in the building of foundations in different soil types, especially on difficult ground. The book covers topics such as the classification of soil; silts, loess, and tills; the mechanical behavior of rocks; and the engineering aspects of rock weathering, engineering classification of rock masses, and the engineering performance of rocks. Also covered in the book are topics such as models for the mechanical behaviour of soil; computer predictions in difficult soil conditions; foundations on rock, settlement foundations, and the relation of earth movement on foundations; ground treatment; and the appraisal of stability conditions in different soil conditions. The text is recommended for engineers who are in need of a guide in the establishment of foundations in different soil conditions, especially those in difficult ones.

  • Protecting Personnel at Hazardous Waste Sites

    • 2 Edición
    • WILLIAM F. MARTIN
    • Inglés
    The second edition of this book brings together a wide range of occupational safety and health recommendations and practices directly applying to hazardous waste site clean ups. In addition to providing the most current information on maximumprotection for clean up personnel, this book is a practical authoritative guide for those involved in clean up operations. The completely updated second edition cites the newest OSHA and NIOSH recommendations which have developed over the past decade and explores the new federal emphasis in hazardous waste site clean ups as Radiation safety, Toxicology, Unexploded ordanance, OSHA training, EPA training and site health and safety plans.

  • Structural Concrete

    Materials; Mix Design; Plain, Reinforced and Prestressed Concrete; Design Tables
    • 1 Edición
    • C. B. Wilby
    • Inglés
    Structural Concrete discusses the design and analysis of reinforced and prestressed concrete structural components and structures. Each of the eight chapters of the book tackles a specific area of concern in structural concrete. The text first deals with the serviceability and safety, and then proceeds to the properties of materials and mix designs. The next two chapters cover reinforced concrete beams and slabs. Chapter 5 discusses column and walls, while Chapter 6 tackles reinforced concrete frames and continuous beams and slabs. The next chapter discusses design structures, while the last chapter covers prestressed concrete. The text will be of great use to undergraduate students of civil and structural engineering. Professionals whose work involves concrete technology will also find the book useful.

  • Radar and Electronic Navigation

    • 6 Edición
    • G. J. Sonnenberg
    • Inglés
    Radar and Electronic Navigation, Sixth Edition discusses radar in marine navigation, underwater navigational aids, direction finding, the Decca navigator system, and the Omega system. The book also describes the Loran system for position fixing, the navy navigation satellite system, and the global positioning system (GPS). It reviews the principles, operation, presentations, specifications, and uses of radar. It also describes GPS, a real time position-fixing system in three dimensions (longitude, latitude, altitude), plus velocity information with Universal Time Coordinated (UTC). It is accurate to 100 meters for general users and about 16 meters for U.S. and NATO users. GPS uses a constellation of 18 satellites encircling the Earth, and measures velocity by means of the Doppler effect. The book explains that GPS has three segments: the space segment, the control segment, and the user segment. The control segment has four monitoring stations while the user segment includes ground-based, marine, airborne or space platforms equipped with GPS devices. The book provides useful information for marine engineers, aviation designers, aeronautical engineers and operators, as well as other officers of sea-going vessels.

  • Problems of Heat Transfer and Hydraulics of Two-Phase Media

    • 1 Edición
    • S. S. Kutateladze
    • Inglés
    Problems of Heat Transfer and Hydraulics of Two-Phase Media presents the theory of heat transfer and hydrodynamics. This book discusses the various aspects of heat transfer and the flow of two-phase systems. Organized into two parts encompassing 22 chapters, this book starts with an overview of the laws of similarity for heat transfer to or from a flowing liquid with various physical properties and allowed for variation in viscosity and thermal conductivity. This book then explores the general functional relationship that exists between viscosity and thermal conductivity for thermodynamically similar substances. Other chapters consider the theoretical and experimental work concerning the critical heat flux for the flow of steam–water mixtures via tubes and non-circular ducts. The final chapter deals with the validity of the proposed equation for the variation of drum pressure. This book is a valuable resource for scientific workers, engineers, and technologists who are involved in the development and design of heat exchange equipment, nuclear reactors, and steam generators.

  • Steels

    Metallurgy and Applications
    • 1 Edición
    • D. T. Llewellyn
    • Inglés
    Steels: Metallurgy and Applications deals with the metallurgy and applications of steel and covers the broad spectrum of the mainstream commercial grades as well as the service or manufacturing requirements that govern their use. Standard specifications and some of the design considerations that provide satisfactory service performance are considered. Brief reference is also made to some of the steel prices that were effective on January 1, 1991. Comprised of five chapters, this book begins with an overview of technological trends in the steelmaking industry since 1980s, paying particular attention to energy conservation, iron-making, continuous casting, and product requirements. The next chapter is devoted to low-carbon strip steels and their cold-forming behavior, applications, and metallurgical factors affecting cold formability. The third chapter focuses on low-carbon structural steels and their strengthening mechanisms, while the fourth chapter considers engineering steels and their heat treatment aspects. The final chapter describes stainless steels and their composition-structur... relationships, commercial grades, corrosion resistance, welding, and cold working. The mechanical properties of stainless steels at elevated and sub-zero temperatures are also examined. This monograph will be of interest to students and practicing metallurgists.

  • Pneumatic Conveying Design Guide

    • 1 Edición
    • David Mills
    • Inglés
    Pneumatic Conveying Design Guide is a guide for the design of pneumatic conveying systems and includes detailed data and information on the conveying characteristics of a number of materials with a wide range of properties. This book includes logic diagrams for design procedures and scaling parameters for the conveying line configuration. It also explains how to improve the performance of pneumatic conveyors by optimizing, uprating, and extending the system or adapting it for a change of material. This book consists of 15 chapters divided into three sections and opens with an overview of the state of the art on pneumatic conveying, along with definitions of the terms used in pneumatic conveying. The next chapter describes the various types of pneumatic conveying systems and the parameters that influence their capabilities in terms of material flow rate and conveying distance. The discussion then turns to feeding and discharging of the conveying line; selection of a pneumatic conveying system for a particular application; and design procedures for pneumatic conveying system. The theory and use of compressed air in pneumatic conveying are also considered, along with the effect of material properties on conveying performance; troubleshooting; and operational problems and some solutions. The final chapter is devoted to the use of bench-scale test methods to determine the material properties relevant to pneumatic conveying. This monograph is intended for designers and users of pneumatic conveying systems.

  • Instrument Technology

    Telemetering and Automatic Control
    • 1 Edición
    • E. B. Jones
    • Inglés
    Instrument Technology, Volume 3: Telemetering and Automatic Control deals with advances in telemetering instruments used in automatic control of industrial processes. The focus is on instruments used to transmit to a control room an indication of the value of a measured variable, and on instruments and mechanisms used to control process variables. The basic physical principles are discussed and the actual instruments are classified according to the principle upon which they are based. This volume consists of two chapters and begins with an overview of telemetering and pneumatic methods of telemetering. Electrical telemetering systems are described in terms of telemetering by variation of an electrical quantity, balanced bridge systems, and position systems. The second chapter discusses the theory of automatic control and illustrates the automation of temperature control in furnaces. The construction and operation of some of the simple, self-acting process controllers are explained and the more elaborate controllers are described. This monograph will be useful to students and those involved in the craft and science of instrumentation.

  • Software Engineer's Pocket Book

    • 1 Edición
    • Michael Tooley
    • Inglés
    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and quality assurance of software.

  • Treatise on Materials Science and Technology

    Materials Science Series, Vol. 1
    • 1 Edición
    • Herbert Herman
    • Inglés
    Treatise on Materials Science and Technology, Volume 1 covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book discusses the energy, kinetics, and topography of interfaces; the fracture of a wide range of composites; and the theory of the propagation of elastic waves through composites. The text also describes the complex nature of substitutional-inter... interactions in bcc alloys; the dynamics of quantitative metallography; and the science and technology of chemical vapor deposition. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Estimating for Heating and Ventilating

    • 3 Edición
    • J.J. Barton
    • Inglés
    Estimating for Heating and Ventilating, Third Edition discusses various concerns regarding heating and ventilating system with an emphasis on cost estimation. The book is comprised of eight chapters that tackle a specific area in heating and ventilating systems. The first chapter tackles the principles and elements of estimating, while the second chapter deals with specifications and drawings. Chapter 3 tackles the materials involved, and Chapter 4 talks about estimating the labor requirements. Chapter 5 discusses the preparation of tender, and Chapter 6 presents notes on costing. Chapter 7 covers builder’s work, and Chapter 8 deals with the estimation of annual running cost. The book will be of great help to engineers, architects, and building administrators who are mostly involved in designing, constructing, and maintaining building systems.

  • Growth Factors

    Cellular Growth Processes, Growth Factors, Hormonal Control of Growth
    • 1 Edición
    • Knud W. Kastrup + 1 más
    • Inglés
    Growth Factors: Cellular Growth Processes, Growth Factors, Hormonal Control of Growth is a compilation of papers from the 11th Meeting of the Federation of European Biochemical Societies in Copenhagen in 1977. The book explains the process that leads to cell replication in vitro and to actual growth in vivo. One paper then examines the use of a combined method to analyze growth control in a culture specimen. Another paper notes the evidence favoring the hypotheses that a delicately regulated increase in the amount of adenine and guanine nucleotide can affect significantly the metabolic pattern of cells that are likely to begin a new mitotic cycle. The book also discusses the possibility that natural polyamines can serve as growth factors and regulate cell growth in some microorganisms and in cell lines of animal origin. Consequently, the use of polyamine measurements to diagnose markers in human malignancies is one practical application of polyamine metabolism. The book also explains the effect of collagen on the chondrogenic differentiation of somite and limb bud mesenchyme on the biochemical processes in bone and cartilage formation. Another paper then discusses the effects of sex hormones on the growth of normal tissues, particularly on lean and fat tissues. The book can prove useful for biologists, chemists, biochemists, and academicians interested in cellular microbiology.

  • Handbook of Industrial Lighting

    • 1 Edición
    • Stanley L. Lyons
    • Inglés
    Handbook of Industrial Lighting is a practical guide on the specification, design, installation, operation, and maintenance of lighting in industrial premises. Coverage of the book includes the importance of good localized lighting; the different lighting schemes; lighting for difficult visual tasks; lighting in consideration to safety; and emergency lighting. The book also includes the practical, thermal, ventilation, and energy considerations; lighting in different environments; maintenance of lighting installations; and the cost benefits of efficient lighting. Appendices include useful information such as UK legislation and codes on lighting; summary of lamp and luminaire data; and conversion factors. The text is recommended for those involved in the design, planning, and maintenance of industrial places such as factories and power plants.

  • Naval Architecture for Marine Engineers

    • 1 Edición
    • W. Muckle
    • Inglés
    Naval Architecture for Marine Engineers focuses on resistance, propulsion, and vibration aspects of ships. The book first discusses the functions, layouts, and types of ships and terms used. The text looks at classification societies and governmental authorities influential on the design, construction, and safety of ships. Lloyd's Register of Shipping; governmental authorities; and Inter-governmental Maritime Consultative Organization (IMCO) are noted. The book also highlights ship calculations, including trapezoidal rule, Simpson's rule, and other rules for calculation. The text discusses as well the buoyancy, stability, and trim. Conditions for equilibrium of body floating in still water; calculation of underwater volume; stability at large angle of inclination; and flooding and damaged stability are considered. The selection also underscores structural strength of ships. Static forces on a ship in still water; dynamic longitudinal strength problem; resistance of ship to buckling; and materials used in ships are noted. The text also looks at resistance, powering, vibration, and propulsion of ships. The book is a vital source of data for readers interested in naval architecture.

  • Advances in Energy Systems and Technology

    Volume 2
    • 1 Edición
    • Peter Auer
    • Inglés
    Advances in Energy Systems and Technology, Volume 2, is intended to furnish a detailed and critical review of timely topics within the general field of energy. The breadth of coverage is greater than that generally found in journal review articles. Thus, the collection of chapters contained within this serial will serve as a valuable reference work for an extended period of time. The book contains four chapters and opens with a discussion of the development of solar power satellites. This is followed by separate chapters on sea thermal power; the direct use of solar energy; and the rationale, structure, and use of models for energy technology assessment. This volume aims to continue attracting a wide audience, consisting of professional workers in the field, serious students at the graduate or advanced undergraduate level, as well as those policy analysts and energy planners who seek a more complete understanding of technical matters.

  • Experimental Modelling in Engineering

    • 1 Edición
    • F. W. David + 1 más
    • Inglés
    Experimental Modelling in Engineering presents the principles of experimental modeling methodically and in such a generalized manner that they may lend themselves to application in practically all fields of technology. The book covers related topics such as modeling based on conditions of similarity; units and dimensions; the applications of homogeneity and dimensionally homogenous equations in the field; and the selection of variables in dimensional analysis. Also covered in the book are topics such as the use of models in experiments; the principle of similarity; examples in experimental modeling; and problems in dimensional analysis and model design. The text is recommended for engineers who would like to know more about the principles, concepts, behind experimental modeling, as well as its applications in engineering and other related fields.

  • Fibres, Films, Plastics and Rubbers

    A Handbook of Common Polymers
    • 1 Edición
    • W.J. Roff + 1 más
    • Inglés
    Fibres, Films, Plastics and Rubbers: A Handbook of Common Polymers focuses on polymeric materials. The book first discusses a list of sections on individual polymers. Topics include olefin and vinyl-type, carbohydrate-type, synthetic condensation-type, organo-silicon, and inorganic polymers, as well as proteins. The text also looks at list of sections on specific properties and related information. The book then discusses polyethylenes, polypropylene, and polytetrafluoroethyl... The text also examines polystyrene. Concerns include the structure, chemistry, physics, fabrication, serviceability, and utilization of these materials. The text also focuses on indene and coumarone/indene resins; polyvinyl acetate and alcohol; polyvinyl formal, acetal, and butyral; and polyacrylates and polymethacrylates. The book then examines the structure, chemistry, physics, fabrication, serviceability, and utilization of polyvinyl chloride, polyvinylidene chloride, cellulose, and cellulose acetate. The book also discusses the structure, chemistry, physics, fabrication, serviceability, and utilization of cellulose nitrate, cellulose ethers, starch, and regenerated proteins. Same type of evaluation is also done to polyamides, epoxy resins, polyformaldehyde, natural rubber, and nitrile rubbers. The text is a valuable source of information for readers interested in polymeric materials.

  • Millimicrosecond Pulse Techniques

    International Series of Monographs on Electronics and Instrumentation
    • 2 Edición
    • I. A. D. Lewis + 1 más
    • Inglés
    Millimicrosecond Pulse Techniques, Second Edition focuses on millimicrosecond pulse techniques and the development of devices of large bandwidth, extending down to comparatively low frequencies (1 Mc/s). Emphasis is on basic circuit elements and pieces of equipment of universal application. Specific applications, mostly in the field of nuclear physics instrumentation, are considered. This book consists of eight chapters and opens with an introduction to some of the terminology employed by circuit engineers as well as theoretical concepts, including the laws of circuit analysis, Fourier analysis of pulse waveforms, and Laplace transforms. The next chapter is devoted to the theory of transmission lines and covers uniform rectilinear lines, helical lines, and lumped delay lines, along with some applications of transmission-line principles. Subsequent chapters explore transformers, pulse generators, amplifiers, and cathode ray oscilloscopes. Examples of applications of millimicrosecond pulse techniques in nuclear physics and other miscellaneous areas such as radar propagation measurements and high-speed photography are also presented. This monograph will be of interest to physicists and electronics engineers.

  • Matrix Methods of Structural Analysis

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 2 Edición
    • R. K. Livesley
    • Inglés
    Matrix Methods of Structural Analysis, 2nd Edition deals with the use of matrix methods as standard tools for solving most non-trivial problems of structural analysis. Emphasis is on skeletal structures and the use of a more general finite element approach. The methods covered have natural links with techniques for automatic redundant selection in elastic analysis. This book is comprised of 11 chapters and begins with an introduction to the concepts and notation of matrix algebra, along with the value of a systematic approach; structure as an assembly of elements; boundaries and nodes; linearity and superposition; and how analytical methods are built up. The discussion then turns to the variables which form the basis of much of structural analysis, as well as the most important relationships between them. Subsequent chapters focus on the elastic properties of single elements; the equilibrium or displacement method; the equilibrium equations of a complete structure; plastic analysis and design; transfer matrices; and the analysis of non-linear structures. The compatibility or force method is also described. The final chapter considers the limits imposed by the size and accuracy of the computer used in structural analysis and how they can be extended. This monograph will be of interest to structural engineers and students of engineering.

  • Phase Equilibria in Chemical Engineering

    • 1 Edición
    • Stanley M. Walas
    • Inglés
    Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.

  • Aerodynamics of Road Vehicles

    From Fluid Mechanics to Vehicle Engineering
    • 1 Edición
    • Wolf-Heinrich Hucho
    • Inglés
    Aerodynamics of Road Vehicles details the aerodynamics of passenger cars, commercial vehicles, sports cars, and race cars; their external flow field; as well as their internal flow field. The book, after giving an introduction to automobile aerodynamics and some fundamentals of fluid mechanics, covers topics such as the performance and aerodynamics of different kinds of vehicles, as well as test techniques for their aerodynamics. The book also covers other concepts related to automobiles such as cooling systems and ventilations for vehicles. The text is recommended for mechanical engineers and phycisists in the automobile industry who would like to understand more about aerodynamics of motor vehicles and its importance on the field of road safety and automobile production.

  • Fluid Dynamics Transactions

    Symposium · Jabłona · September 1961
    • 1 Edición
    • W. Fiszdon
    • Inglés
    Fluid Dynamics Transactions, Volume 1 is a compilation of papers presented at the Fifth Symposium on Fluid Dynamics held in Poland from August 26 to September 2, 1961. The symposium provided a forum for discussing developments in fluid dynamics based on the following topics: mathematical methods, hypersonic flow, rarefied gas dynamics, and magnetohydrodynamics... This volume is comprised of 26 chapters and begins by presenting equations for gas dynamics and highlighting some of applications of the general results. The discussion then turns to Cauchy's problem for the compressible flow of the simple wave type; the use of exact numerical methods for the solution of boundary layer problems; and the effect of surface catalytic efficiency on stagnation point heat transfer. A geometric method of classifying solutions of gas dynamics using certain space and the time-space Lie transformation groups is described. Subsequent chapters explore supersonic flow past blunt bodies; application of the Monte Carlo method to the analysis of rarefied gas flows; and fluid-fluid displacement in a porous medium. This book will be a useful resource for engineers and other scientists interested in fluid dynamics.

  • Dynamics of Fixed Marine Structures

    • 3 Edición
    • N. D. P. Barltrop + 1 más
    • Inglés
    Dynamics of Fixed Marine Structures, Third Edition proves guidance on the dynamic design of fixed structures subject to wave and current action. The text is an update of the ""UR8"" design guide ""Dynamics of Marine Structures"" with discussion of foundations, wind turbulence, offshore installations, earthquakes, and strength and fatigue. The book employs analytical methods of static and dynamic structural analysis techniques, particularly the statistical and spectral methods when applied to loading and in the calculating dynamic responses. The statistical methods are explained when used to wave, wind, and earthquake calculations, together with the problems encountered in actual applications. Of importance to fixed offshore platforms are the soil properties and foundation covering soil behavior, site investigation, testing, seabed stability, gravity structures, and the use of single piles. Methods of forecasting, measuring, and modeling of waves and currents are also presented in offshore structure construction. Basic hydrodynamics is explained in understanding wave theory, and some description is given to forecasting of environmental conditions that will affect the structures. The effects of vortex-induced vibrations on the structure are explained, and the three methods that can prevent vortex-induced oscillations are given. Wind turbulence or wind loads are analyzed against short natural period or long natural periods of structures. The transportation of offshore platforms, installation, and pile driving, including examples of the applications found in the book, are given as well. The guide is helpful for offshore engineers, designers of inshore jetties, clients needing design and analysis work, specialists related to offshore structural engineering, and students in offshore engineering.

  • Advanced Materials 1991-1992

    II. Directory
    • 1 Edición
    • A. Fletcher
    • Inglés
    Advanced Materials 1991-1992, II. Directory focuses on detailed information on the leading manufacturers, suppliers, and end-users of advanced materials and associated processing equipment. The directory first offers information on ceramics, as well as geographical index, company data, and materials product index. Countries mentioned include Australia, Belgium, Canada, France, and Germany. Corporations listed are Daimler Benz AG, Saint Gobian, Norton GmbH, Abar Ispen Industries, and Rath Keramikfaser GmbH. The publication then examines the geographical index, company data, and materials product index of composites. Countries listed include India, Italy, Japan, Spain, Sweden, and Switzerland. Companies mentioned include Amoco Chemical (Europe) SA, Kawasaki Steel, Monteidson, Albany International Research, and Agusta Spa. The book takes a look at the geographical index, company data, and materials product index of plastics. The directory is a helpful reference for readers interested in the manufacturers, suppliers, and end-users of advanced materials.

  • Distributed Parameter Control Systems

    Theory and Application
    • 1 Edición
    • Spyros G. Tzafestas
    • Inglés
    Distributed Parameter Control Systems: Theory and Application is a two-part book consisting of 10 theoretical and five application-oriented chapters contributed by well-known workers in the distributed-paramete... systems. The book covers topics of distributed parameter control systems in the areas of simulation, identification, state estimation, stability, control (optimal, stochastic, and coordinated), numerical approximation methods, optimal sensor, and actuator positioning. Five applications works include chemical reactors, heat exchangers, petroleum reservoirs/aquifers, and nuclear reactors. The text will be a useful reference for both graduate students and professional researchers working in the field.

  • Mathematics for Electronic Technology

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • D. P. Howson
    • Inglés
    Mathematics for Electronic Technology is a nine-chapter book that begins with the elucidation of the introductory concepts related to use of mathematics in electronic engineering, including differentiation, integration, partial differentiation, infinite series, vectors, vector algebra, and surface, volume and line integrals. Subsequent chapters explore the determinants, differential equations, matrix analysis, complex variable, topography, graph theory, and numerical analysis used in this field. The use of Fourier method for harmonic analysis and the Laplace transform is also described. The material in this book will be very helpful to undergraduates taking an electronic engineering course.

  • Mechanics of Composite Materials

    Proceedings of the Fifth Symposium on Naval Structural Mechanics
    • 1 Edición
    • F. W. Wendt + 2 más
    • Inglés
    Mechanics of Composite Materials contains the proceedings of the Fifth Symposium on Naval Structural Mechanics held in Philadelphia, Pennsylvania, on May 8-10, 1967. The papers explore the mechanics of composite materials for naval applications. The structural requirements of a system and the fundamental mechanical properties of composite materials, as well as the behavior of such materials under various environmental conditions, are discussed. This book is comprised of 40 chapters and begins with an analysis of missile and aircraft systems constraints and operational requirements, along with ship systems constraints and operational requirements, for composite materials. The following chapters focus on structural uses of composites, particularly in naval ships, aircraft, re-entry vehicles, and space vehicle structures; and the micromechanics, structural mechanics, and failure mechanics of composite materials. Problems in the design of joints and attachments are considered, along with the stability of pre-strained laminated media; environmental factors in the design of composite materials; and the effect of water on glass-reinforced plastics. This monograph will be a useful resource for scientists and engineers who are particularly concerned with the mechanics of composite materials.

  • Electrical Engineer's Reference Book

    • 15 Edición
    • G R Jones
    • Inglés
    A long established reference book: radical revision for the fifteenth edition includes complete rearrangement to take in chapters on new topics and regroup the subjects covered for easy access to information.The Electrical Engineer's Reference Book, first published in 1945, maintains its original aims: to reflect the state of the art in electrical science and technology and cater for the needs of practising engineers. Most chapters have been revised and many augmented so as to deal properly with both fundamental developments and new technology and applications that have come to the fore since the fourteenth edition was published (1985). Topics covered by new chapters or radically updated sections include: * digital and programmable electronic systems * reliability analysis * EMC * power electronics * fundamental properties of materials * optical fibres * maintenance in power systems * electroheat and welding * agriculture and horticulture * aeronautic transportation * health and safety * procurement and purchasing * engineering economics

  • Electrical Installation Technology

    • 3 Edición
    • Michael Neidle
    • Inglés
    Electrical Installation Technology, Third Edition covers the wide range of subjects that come under the headings of electrical science, installations, and regulations. The book discusses electromagnetism; inductance; static electricity; d.c. circuits; voltage drop and current rating; distribution; and wiring techniques. The text also describes o.c. motors and generators; a.c. motors, transformers; power-factor improvement; earthing and earth-leakage protection; testing; illumination; and the general principles of temperature and heat. Communication systems and equipment; electronics; and site and office management of electrical installation business are also considered. Students taking the electrical installation technicians, electrical technicians, and electrical engineering courses will find the book useful.

  • Methods of Functional Analysis for Application in Solid Mechanics

    • 1 Edición
    • Volumen 9
    • J. Mason
    • Inglés
    Publications oriented to the interests of engineering scientists and graduate students on topics of functional analysis and its applications are rare - this book has been written to fill the gap in the literature. It provides a readable account of basic mathematic topics, with illustrative examples and chapters devoted to finite elements, variational principles of elasticity and plasticity, variational inequalities and elastic stability. The text is entirely self-contained and covers a wide range of topics and ideas, from elementary concepts to modern theories and applications, and includes numerous references. It is written for engineers, graduate students and researchers who need a general knowledge of modern mathematical methods in solid mechanics.

  • Generation, Compilation, Evaluation and Dissemination of Data for Science and Technology

    The Proceedings of the Fourth International CODATA Conference
    • 1 Edición
    • Bertrand Dreyfus
    • Inglés
    Generation, Compilation, Evaluation and Dissemination of Data for Science and Technology is a compilation of manuscripts presented at the four proceedings organized by the Committee on Data for Science and Technology (CODATA). It focuses on the functions of CODATA, a data center that operates by generating, compiling and evaluating data. This book discusses conventional areas of CODATA activity, namely the fields of physics, chemistry and allied subjects, the biological sciences, geology, geophysics, geography, and astronomy. It includes lectures from the first two sessions, giving up-to-date reviews on data centers, particularly the use of computers in a variety of data activities. The book also deals with CODATA's original areas of interest: spectroscopic and thermodynamic data. Information scientists interested in documentation systems will find this book indispensable.

  • Electric Circuit Theory

    Applied Electricity and Electronics
    • 1 Edición
    • R. Yorke
    • P. Hammond
    • Inglés
    Electric Circuit Theory provides a concise coverage of the framework of electrical engineering. Comprised of six chapters, this book emphasizes the physical process of electrical engineering rather than abstract mathematics. Chapter 1 deals with files, circuits, and parameters, while Chapter 2 covers the natural and forced response of simple circuit. Chapter 3 talks about the sinusoidal steady state, and Chapter 4 discusses the circuit analysis. The fifth chapter tackles frequency response of networks, and the last chapter covers polyphase systems. This book will be of great help to electrical, electronics, and control engineering students or any other individuals who require a substantial understanding of the physical aspects of electrical engineering.

  • Proceedings of the Seventh New England (Northeast) Bioengineering Conference

    • 1 Edición
    • Lee E. Ostrander
    • Inglés

  • Heat and Fluid Flow in Power System Components

    Hmt The Science & Applications of Heat and Mass Transfer
    • 1 Edición
    • A. M. A. Rezk
    • Inglés
    Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.

  • Combustion and Heat Transfer in Gas Turbine Systems

    Proceedings of an International Propulsion Symposium Held at the College of Aeronautics, Cranfield, April 1969
    • 1 Edición
    • E. R. Norster
    • Inglés
    Combustion and Heat Transfer in Gas Turbine Systems is a compilation of papers from the Proceedings of an International Propulsion Symposium held at the College of Aeronautics, Cranfield in April 1969. This compilation deals with research done by academic and scientific institutions and of industrial organizations, with some research papers covering atomization, fuels, and high-temperature materials. One paper describes the combustion system of the Concorde engine used in commercial flights, temperature of metal parts, and some design modifications to increase the mechanical life of the combustion system. Another paper discusses the evolution of the RB 162 combustion system that is used in the vertical takeoff and landing aircrafts. The RB 162 has many design features of the earlier single reversal chamber and differs in only one or two points. The book then notes the necessity of a plenum chamber burning to further development of supersonic engines and flight. One paper also proposes an alternative theory to the traditional ignition theory of altitude relighting such as those developed by Lewis and von Elbe. Another paper reposts on some observations made of the atomizing characteristics of air-blast atomizers and proposes simple changes to improve the performance of the atomizer by prefilming and allowing air to both sides of the fuel. This compilation will prove very helpful for aeronautical engineers, aviation designers, physicists, students of engineering, and readers who are interested in the design and development of jet engines and supersonic aircrafts.

  • High Power Lasers

    • 1 Edición
    • A. Niku-Lari + 1 más
    • Inglés
    The use of lasers for the working and treatment of materials is becoming increasingly common in industry. However, certain laser applications, for example, in welding, cutting and drilling, are more widely exploited than others. Whilst the potential of lasers for the surface treatment of metals is well recognised, in practice, this particular application is a relative newcomer. The 24 papers in this volume present the latest research and engineering developments in the use of lasers for processes such as surface melting, surface alloying and cladding, and machining, as well as discussing the properties of laser-treated materials.

  • Classical and Modern Control with Worked Examples

    Pergamon International Library of Science, Technology, Engineering and Social Studies: International Series on Systems and Control, Volume 2
    • 1 Edición
    • Jean-Pierre Elloy + 1 más
    • M G Singh + 2 más
    • Inglés
    Classical and Modern Control with Worked Examples contains problems in automatic control, with emphasis on continuous time systems. The book contains exercises that increase in difficulty. The text is organized into three parts, with each of the three parts divided into two chapters. The first chapter of each part consists of a course abstract; the second chapter contains the exercises relevant to the course in question. The first and second parts are devoted to linear and non-linear servo-systems. The third part introduces representation in the form of equations of state of linear systems. The book will be useful to students, technicians, and qualified engineers who wish to acquaint themselves in a practical way with both the traditional and the modern principles of automatic control, and with their application to industrial processes of all kinds.

  • Transmitters in the Visual Process

    • 1 Edición
    • S.L. Bonting
    • Inglés
    Transmitters in the Visual Process is a compilation of papers presented at a symposium of the Fifth International Meeting of the International Society for Neurochemistry in Barcelona in September 1975. This collection presents a multidisciplinary field of study on visual transmitter physiology, pharmacology, and intracellular transmitters. One paper discusses the structure and mechanism of the visual system of vertebrates that consists of cells that transmit photon signals absorbed in a photoreceptor cell to the brain. This book focuses on which transmitter is involved at that certain point where the signal crosses the gap between two stimulated adjacent membranes. One paper then examines the role of cyclic nucleotides in the functions of the rod outer segment, which is the sensitive part, of the photoreceptor cell. The different kinds of chemicals, such as calcium, taurine, gamma-amino butyric acid, glycine, and biogenic monoamines are examined as to their role as transmitters in the retina. This book concludes with a presentation of the results of a study done on the neurotransmitters and the isolated optic tract-superior colliculus of a guinea pig. This compendium will serve the needs of biochemists, medical students, and researchers in the fields of ophthalmology and neurophysiology.

  • Principles of Transistor Circuits

    Introduction to the Design of Amplifiers, Receivers and Digital Circuits
    • 6 Edición
    • S W Amos
    • Inglés
    Principles of Transistor Circuits: Sixth Edition discusses the principles, concepts, and practices involved integrated circuits. The current edition includes up-to-date circuits, the section on thyristors has been revised to give more information on modern types, and dated information has been eliminated. The book covers related topics such as semiconductors and junction diodes; the principles behind transistors; and common amplifiers. The book also covers bias and DC stabilization; large-signal and small-signal AF amplifiers; DC and pulse amplifiers; sinusoidal oscillators; pulse and sawtooth generators; and digital circuits. The book also includes Appendix A, which covers the manufacture of transistors and integrated circuits; and Appendix B, which covers transistor parameters. The text is recommended for electronic engineers who would like to know about the principles, components, and advances related to integrated circuits.

  • Marine Steam Boilers

    • 4 Edición
    • James H. Milton + 1 más
    • Inglés
    Marine Steam Boilers: Fourth Edition deals with the involved concepts, parts and construction, usage and maintenance, and the future direction of steam boilers. The book covers topics such as the history of steam boilers; theoretical development of steam boilers; and the materials and methods used in their construction. Also covered are the types of boilers - the tank-type boiler, which includes horizontal and vertical boilers; water tube boilers such as the Foster Wheeler boiler, Babcock & Wilcox boilers, and combustion engineering boilers; and dual-fired boilers. The text is recommended for marine engineers who would like to know more about boilers, its different types and the advantages of each, and their operation.

  • Metallurgy of Superconducting Materials

    Treatise on Materials Science and Technology, Vol. 14
    • 1 Edición
    • Thomas Luhman + 1 más
    • Inglés
    Treatise on Materials Science and Technology, Volume 14: Metallurgy of Superconducting Materials covers the practical use of metallurgy of superconducting materials. The book discusses the phenomenon of superconductivity; the theory of superconductors; the applications of superconductivity and the demands these applications make on materials' properties and requirements. The text also describes the metallurgy of niobium-titanium alloy conductors; the physical metallurgy of A15 compounds; and the electron microscopy of superconducting materials. The metallurgy of conductors made from A15 material, the properties required, as well as the development of superconductors for ac power transmission are considered. The book further tackles the metallurgy of niobium surfaces, and the effects of radiation on superconductors. Metallurgists, physicists, materials scientists, materials engineers, and graduate students studying superconductors will find the book invaluable.

  • Power Electronics Handbook

    Components, Circuits and Applications
    • 1 Edición
    • F. F. Mazda
    • Inglés
    Power Electronics Handbook: Components, Circuits, and Applications is a collection of materials about power components, circuit design, and applications. Presented in a practical form, theoretical information is given as formulae. The book is divided into three parts. Part 1 deals with the usual components found in power electronics such as semiconductor devices and power semiconductor control components, their electronic compatibility, and protection. Part 2 tackles parts and principles related to circuits such as switches; link frequency chargers; converters; and AC line control, and Part 3 covers the applications for semiconductor circuits. The text is recommended for engineers and electricians who need a concise and easily accessible guide on power electronics.

  • Transition Metal Toxicity

    • 1 Edición
    • G. W. Richter + 1 más
    • Inglés
    International Review of Experimental Pathology, Volume 31: Transition Metal Toxicity merges discussions of normal and deranged metabolism of transition metals; redox cycling of metal ions in biological systems; oxidative stress during the metabolic interactions of metal ions; and the actions of oxygen-derived free radicals in the pathogenesis of metal ion toxicity. The book also describes the roles played by chromium and other metals in carcinogenesis; the morphologic pathology of metal toxicosis; and metal ion overload due to inborn metabolic defects, as well as to excessive environmental exposure. Research findings at the molecular, cellular, and organ levels are reviewed. Physiologists, biochemists, pathologists, and biophysicists will find the book invaluable.

Temas relacionados