Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Power Electronics Handbook

    Components, Circuits and Applications
    • 1 Edición
    • F. F. Mazda
    • Inglés
    Power Electronics Handbook: Components, Circuits, and Applications is a collection of materials about power components, circuit design, and applications. Presented in a practical form, theoretical information is given as formulae. The book is divided into three parts. Part 1 deals with the usual components found in power electronics such as semiconductor devices and power semiconductor control components, their electronic compatibility, and protection. Part 2 tackles parts and principles related to circuits such as switches; link frequency chargers; converters; and AC line control, and Part 3 covers the applications for semiconductor circuits. The text is recommended for engineers and electricians who need a concise and easily accessible guide on power electronics.

  • Transition Metal Toxicity

    • 1 Edición
    • G. W. Richter + 1 más
    • Inglés
    International Review of Experimental Pathology, Volume 31: Transition Metal Toxicity merges discussions of normal and deranged metabolism of transition metals; redox cycling of metal ions in biological systems; oxidative stress during the metabolic interactions of metal ions; and the actions of oxygen-derived free radicals in the pathogenesis of metal ion toxicity. The book also describes the roles played by chromium and other metals in carcinogenesis; the morphologic pathology of metal toxicosis; and metal ion overload due to inborn metabolic defects, as well as to excessive environmental exposure. Research findings at the molecular, cellular, and organ levels are reviewed. Physiologists, biochemists, pathologists, and biophysicists will find the book invaluable.

  • Advances in Security Technology

    Selected Papers of the Carnahan Conferences on Security Technology 1983-1985
    • 1 Edición
    • Romine (Dick) Deming
    • Inglés
    Advances in Security Technology: Selected Papers of the Carnahan Conferences on Security Technology, 1983–1985 focuses on security solutions. The book first discusses securing planning, including technical methods to enhance protection against sabotage and theft. The text elaborates on integrated security systems, including methodology overview and security systems design. The book highlights physical protection systems using activated barriers and development of deployment procedures for activated barriers. Physical protection, barrier technology, and barrier operations are explained. The text discusses intrusion detection systems; developments in long-line ported coaxial intrusion detection sensors; ported coaxial cable sensors for interior applications; and opportunities for photoelectric beams for indoor and outdoor security applications. The book also highlights developments in ultrasonic and infrared motion detectors; vault protection with seismic detector systems; external use of closed-circuit television; and security system applications for fiber optics. The selection is a good source of information for security experts.

  • Plastic Deformation of Materials

    Treatise on Materials Science and Technology, Vol. 6
    • 1 Edición
    • R. J. Arsenault
    • Inglés
    Treatise on Materials Science and Technology, Volume 6: Plastic Deformation of Materials covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book presents articles on the low temperature of deformation of bcc metals and their solid-solution alloys; the cyclic deformation of metals and alloys; and the high-temperature diffusion-controlled creep of some metals and alloys, with particular reference to the various creep mechanisms. The text also includes articles on superplasticity; the fatigue deformation of polymers; the low temperature deformation of crystalline nonmetals; and the recovery and recrystallization during high temperature deformation. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Advances in Energy Systems and Technology

    Volume 5
    • 1 Edición
    • Peter L. Auer + 1 más
    • Inglés
    Advances in Energy Systems and Technology: Volume 5 present articles that provides a critical review of specific topics within the general field of energy. It discusses the fuel cells for electric utility power generation. It addresses the classification of fuel cell technologies. Some of the topics covered in the book are the major components of the fuel cell; the phosphoric acid fuel cells; molten carbonate fuel cells; solid oxide fuel cells; electric utility fuel cell systems; and the integration within fuel cell power plants. The analysis of the solar ponds is covered. The operational problems with salt-gradient solar ponds are discussed. The text describes the membrane-stratified solar ponds. A study of the household demand for conservation is presented. A chapter is devoted to the construction of the insulation index. Another section focuses on the use of Box-Cox transform for both dependent and explanatory variables. The book can provide useful information to scientists, engineers, students, and researchers.

  • Modern Physical Metallurgy

    • 4 Edición
    • R. E. Smallman
    • Inglés
    Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.

  • Statistics for the Teacher

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 2 Edición
    • Douglas M. McIntosh
    • Inglés
    Statistics for the Teacher, Second Edition serves as a guide to understand the significance and legitimate use of examination marks. This book examines the application of elementary statistics to examination marks involving only arithmetic. Organized into 10 chapters, this edition starts with an overview of the essential differences between counting and measuring in education. This text then explains the three factors that may be taken into consideration in interpreting the distribution of marks, including the nature of the examination, the type of group sitting the examination, and the marking scheme. Other chapters consider the most convenient measure of the standard of attainment or of the standard of marking, which is the average or arithmetic mean. This book discusses as well the method of obtaining a more accurate measure of the scatter. The final chapter deals with the method of determining the mean or average. Teachers will find this book useful.

  • Treatise on Materials Science and Technology

    Volume 5
    • 1 Edición
    • Herbert Herman
    • Inglés
    Treatise on Materials Science and Technology, Volume 5 covers the areas of thermodynamics, radiation effects, and mechanical properties. The book presents articles on solution thermodynamics; and on a fundamental and applied approach to the study of radiation-induced color centers. The text also includes articles on the basic types of metal fatigue and on the relationship between atomic order and the mechanical properties of alloys. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Advances in Factories of the Future, CIM and Robotics

    • 1 Edición
    • Volumen 16
    • M. Cotsaftis + 1 más
    • Inglés
    Productivity enhancement is a major concern for all manufacturing enterprises. Productivity enhancement can be achieved in many ways and many facets of its problems have been investigated over the last decades. A number of methods, tools and technologies have emerged to efficiently increase productivity and rationalize management of manufacturing enterprises. International experts from both academia and industry share their experiences in this collection of articles, contributing to the latest advances in the many facets of productivity enhancement in manufacturing enterprises. Themes and visions are detailed on factories of the future, new management approaches, manufacturing system integration and manufacturing information systems. These technical areas can be grouped into four major sections: Factories of the future; Techniques and tools for automated manufacturing; Robotics; and Industrial applications. The papers illustrate a pattern of valuable and interesting approaches to the fascinating problem of designing a new generation of robots with high enough performance capabilities to be used in an industrial context.

  • Ceramic Fabrication Processes

    Treatise on Materials Science and Technology, Vol. 9
    • 1 Edición
    • Franklin F. Y. Wang
    • Inglés
    Treatise on Materials Science and Technology, Volume 9: Ceramic Fabrication Processes covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book discusses the powder preparation processes; milling; the characterization of ceramic powders; and the effects of powder characteristics. The text also describes dry pressing; hot pressing; isostatic pressing; slip casting; doctor-blade process; firing; and ceramic machining and surface finishing. Surface treatments; mechanical behavior; and methods of measuring surface texture are also considered. The book further tackles crystal growth as well as controlled solidification in ceramic eutectic systems. The text also looks into controlled grain growth. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Mechanical Seals

    • 3 Edición
    • E. Mayer
    • B. S. Nau
    • Inglés
    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and cost effectiveness. The next chapter is devoted to test rigs used to establish the effect of the various seal parameters on the behavior of face seals. Special test rigs used to establish leakage, wear, friction losses, and temperature distributions for various material combinations, rubbing speeds, pressures, fluid media, and temperatures are highlighted. The following chapters explain primary leakage through the seal gap between the faces of the seals; factors that contribute to seal wear; friction and power of a mechanical seal; relationship of leakage to wear and friction of a balanced face seal; and importance of seal reliability and operating safety. The final chapter explores particularly interesting sealing problems together with the use of special accessories such as heat exchangers; magnetic and cyclone separators; and techniques such as cooling and auxiliary circulation. This book will be useful to mechanical engineers as well as seal designers and seal users.

  • Microprocessors

    Epo Applied Technology Series
    • 1 Edición
    • O. A. R. Cornillie
    • Inglés
    Microprocessors presents an overview of the state of the art in the field of microprocessors and illustrates, with the aid of patents, its utilization and application. Organized into six parts, the book begins with an introduction to the microprocessor, microcomputer, and software. Parts I-III focus on program control, digital control, and electrical motor control. Subsequent parts show the medical applications, measuring instruments, and treatment of data in microprocessors.

  • Friction and Wear in Polymer-Based Materials

    • 1 Edición
    • V. A. Bely + 2 más
    • Inglés
    Friction and Wear in Polymer-Based Materials discusses friction and wear problems in polymer-based materials. The book is organized into three parts. The chapters in Part I cover the basic laws of friction and wear in polymer-based materials. Topics covered include frictional interaction during metal-polymer contact and the influence of operating conditions on wear in polymers. The chapters in Part II discuss the structure and frictional properties of polymer-based materials; the mechanism of frictional transfer when a polymer comes into contact with polymers, metals, and other materials; and controlling the frictional properties of polymer materials. Part III is devoted to applications of polymer-based materials in friction assemblies. It covers composite self-lubricating materials and polymer materials for complexly loaded main friction assemblies. This work may prove useful to specialists interested in the problems of using polymer materials. It also aims to stimulate deeper research into the field of friction and wear in polymer-based materials.

  • Passive and Low Energy Architecture

    Proceedings of the Second International PLEA Conference, Crete, Greece, 28 June-1 July 1983
    • 1 Edición
    • Simos Yannas + 1 más
    • Inglés
    Passive and Low Energy Architecture contains the proceedings of the Second International PLEA Conference held in Crete, Greece, on June 28 to July 1, 1983. The book is organized into four parts as the topics of the conference. The first part brings together papers dealing with case studies of individual buildings or groups of buildings, completed or to be built, and of community planning. The case studies cover examples from 13 countries in Europe, North and Latin America, North Africa, the Middle East, and Asia. The second part contains papers on experimental work and technical developments with passive and low energy systems and components. The third section focuses on the ill-defined but crucial to designers, area of design aids. The fourth section centers on implementation and management of these energy systems, including topics of international programs, education, and training of design professionals. The book will be useful to energy conscious designers, architects, engineers, and planners in this field of interest.

  • Concrete in Highway Engineering

    International Series of Monographs in Civil Engineering
    • 1 Edición
    • D. Raymond Sharp
    • J. L. Raikes + 1 más
    • Inglés
    International Series of Monographs in Civil Engineering, Volume 4: Concrete in Highway Engineering focuses on the design and construction of highways. The book first offers information on concrete as a material. Cement, aggregates, water, concrete mixes, and curing concrete are then explained. The text examines the design of pavements. Principles of design, traffic loading, design of flexible and concrete pavements, and types of pavement are underscored. The text looks at subgrade soils, sub-bases, and drainage. Topics such as moisture control and drainage; control of surface and subsoil water; and layouts for subsoil drainage and for surface water drainage are discussed. The text also examines the composition of concrete roads, prestressed concrete roads, and maintenance and repair techniques. The book then discusses the appearance and surface characteristics of concrete and construction in extreme weather conditions. The selection is a reliable reference for readers wanting to know about the design and construction of highways.

  • Cancer Control

    Proceedings of the 12th International Cancer Congress, Buenos Aires, 1978
    • 1 Edición
    • A. R. Smith + 1 más
    • Inglés
    Advances in Medical Oncology, Research and Education, Volume II: Cancer Control covers the proceedings of the 12th International Cancer Congress, held in Buenos Aires in 1978. The text aims to present concerns related to cancer and its prevention and patient rehabilitation. The book first discusses cancer education, including the rationale of educating people about cancer; teaching materials and its development and evaluation; oncology teaching; evaluation of cancer education; and the role of mass communication media. The second part of the book explains the cancer campaign. This part emphasizes the need to reach the unreachable audience who are in need of cancer awareness. The text then goes on discussing cancer diagnosis and impact. The last part is devoted to monitoring cancer, including how to process data gathered in studying cancer. The selection will be invaluable to medicine and biology students, specializing in the study and treatment of cancer. Medical practitioners and researchers interested in cancer study will also benefit from the book. The text also caters communication specialists, as the book gives practical insights into the use of media in educating people.

  • Innovation and Technology Transfer for the Growing Firm

    Text and Cases
    • 1 Edición
    • Julian Lowe + 1 más
    • Inglés
    Innovation and Technology Transfer for the Growing Firm: Text and Cases is a practical guide and commentary in the field of technology transfer with emphasis on the economic and managerial aspects of the subject. The book is concerned with both positive and normative aspects of licensing. The book is organized into three parts. Part I presents general definitions and discussion of factors impinging on the environment of licensing. Parts II and III deal with alternative licensing strategies, some empirical evidence, and a public policy approach that might be adopted by governments interested in using licensing to promote business development. The text will be useful to students and practitioners in this field of interest.

  • Analogue Computing Methods

    The Commonwealth and International Library: Applied Electricity and Electronics Division
    • 1 Edición
    • D. Welbourne
    • P. Hammond
    • Inglés
    Analogue Computing Methods presents the field of analogue computation and simulation in a compact and convenient form, providing an outline of models and analogues that have been produced to solve physical problems for the engineer and how to use and program the electronic analogue computer. This book consists of six chapters. The first chapter provides an introduction to analogue computation and discusses certain mathematical techniques. The electronic equipment of an analogue computer is covered in Chapter 2, while its use to solve simple problems, including the method of scaling is elaborated in Chapter 3. Chapter 4 describes the general layout of a computer with specifications of selected commercial computers. In Chapter 5, the use of a large computer is elaborated through a reactor simulation. The last chapter outlines particular general analogue devices. Conductive analogues and other methods and special techniques, which have been used in connection with electronic analogue computing, are also deliberated in this text. This publication is valuable to students and individuals conducting work on analogue computing.

  • Empirical Metallogeny

    Depositional Environments, Lithologic Associations and Metallic Ores
    • 1 Edición
    • Peter Laznicka
    • Inglés
    Empirical Metallogeny: Depositional Environments, Lithologic Associations, and Metallic Ores, Vol. 1: Phanerozoic Environments, Associations, and Deposits focuses on the composition, characteristics, properties, and reactions of Phanerozoic metallic ore deposits. The book first offers information on depositional environments and lithologic associations and the world ocean, including ores and host associations, sea water as a metal source, and metals in marine organisms. The text then elaborates on continental margins, orogenic belts, and ophiolite association. Discussions focus on metal geochemistry and metallogeny, tectonic setting and distribution of ophiolites, trace metals and ore evolution, and supracrustal lithologic associations of orogenic belts. The publication tackles zoned mafic/ultramafic complexes in Phanerozoic orogenic belts; unimodal mafic volcanic-sedimentary association; and unimodal felsic volcanic-sedimentary association. Topics include post-depositional modification of massive sulfides, and interaction mineralization and massive tholeiitic basalt flows and arc affiliation. The book is a dependable source of information for readers wanting to study metallic ores.

  • Bibliography on the Fatigue of Materials, Components and Structures

    1961 - 1965
    • 1 Edición
    • J. Y. Mann
    • Inglés
    Bibliography on the Fatigue of Materials, Components and Structures, Volume 3 addresses the problems associated with fatigue loadings as evident in branches of engineering and technology. Such debilitating factor also affects the human skeletal system. The book provides several references that show an increasing focus being given to the problem of fatigue in materials, components, and structures. The journals and lists of references used in the book, which discuss the subject of fatigue, are chosen to give an initial identification of citations. These sources are accompanied by computer-based documentation systems. The bibliographical data for each citation are thoroughly reviewed by checking the original bases of publication. The references in the book are arranged chronologically according to its year of publication. Major use has been made of abbreviations for the titles of journals and publications. The book can serve as a valuable tool for doctors, therapists, students, and researchers in the field of medicine.

  • Friction and Wear

    Calculation Methods
    • 1 Edición
    • I V Kragelsky + 2 más
    • Inglés
    Friction and Wear: Calculation Methods provides an introduction to the main theories of a new branch of mechanics known as ""contact interaction of solids in relative motion."" This branch is closely bound up with other sciences, especially physics and chemistry. The book analyzes the nature of friction and wear, and some theoretical relationships that link the characteristics of the processes and the properties of the contacting bodies essential for practical application of the theories in calculating friction forces and wear values. The effect of the environment on friction and wear is also considered. Finally, the requirements, which must be fulfilled by the physicomechanical properties of the materials of which contacting bodies are made and which determine their behavior in moving contacts, are formulated. The book will be of interest to a wide circle of readers, e.g. engineers, designers, machine users, and research workers, working on the production of wear-resistant materials and working on the nature of friction and wear.

  • Strength of Materials

    A Course for Students
    • 1 Edición
    • Peter Black
    • Inglés
    Strength of Materials: A Course for Students deals with theories of stress analysis. The book describes simple stress, strain, and strain energy and defines, with appropriate formulas, commonly used terms such as load, elasticity, tensile test, and temperature stresses. The text then analyzes the moment when an applied force bends a subject beam under different load conditions. The formula for the first and second moments of area and the formula for the first and second moments of mass are explained. The book also describes the unstrained or neutral plane when a bending moment acting on a particular beam results in tensile and compressive strains. The author also explains bending with direct stress, torsion, and the types of complex stresses. The theories of elastic failure are then discussed: the Maximum Principal Stress Theory (Rankine) for brittle materials, as well as the Maximum Shear Stress Theory (Coulomb, Tresca, and Guest) and the Maximum Strain Energy Theory (Haigh), which both concern ductile materials. The text also addresses the stress that can occur in both thick and thin cylinders, and then shows the appropriate computations to determine the downward forces as well as Lame's Formulas, which are used to find the radial and hoop stresses acting on the cylinder. This textbook is useful for students of civil, structural, and mechanical engineering. Designers and technicians of industrial machinery will also greatly profit from reading this book.

  • Information Technology Serving Society

    • 1 Edición
    • Robert Lee Chartrand + 1 más
    • Inglés
    Information Technology Serving Society focuses on the potential roles of information technology in shaping society, including advances in the capabilities of computers, progress of processes in information transfer, and implementation of information technology control measures. The selection first discusses information transfer, as well as the benefits and risks of the relationship of computers and human, the need for information policy, and challenges in information technology. The book then takes a look at information policy and technology in transition. Topics include developments in information policy and technology, applications of computers to social functions, and use of data bases in time-sharing services. The publication examines the combination of computing power and human ingenuity, including the value of communications, role of automation, and voice command recognition. The text also underscores how the use of computers has improved the processes of information gathering, sharing, and retrieval in the congress and senate. The need for the government to impose regulations on information technology is emphasized. The selection is a must for readers interested in the developments and applications of information technology.

  • Materials Data for Cyclic Loading

    High-Alloy Steels
    • 1 Edición
    • Chr. Boller + 1 más
    • C. Laird
    • Inglés
    Materials Data for Cyclic Loading, Part C: High-Alloy Steels provides the necessary data for a proper material assessment. The book presents the data of high-alloy steels that help estimate the crack initiation lives of structural parts. The data sheets included in the text provide the description of the material and testing procedures, along with diagrams for stress-strain curves for monotonic and cyclic loading strain life curve. The book also provides the results of stress- and strain-controlled constant amplitude tests. The text will be useful to researchers and practitioners of engineering, metallurgy, and physics.

  • The Mechanical Behaviour of Engineering Materials

    The Commonwealth and International Library: Structures and Solid Body Mechanics Division
    • 1 Edición
    • W. D. Biggs
    • B. G. Neal
    • Inglés
    The Mechanical Behaviour of Engineering Materials aims to relate properties and structure, and to provide a theoretical basis upon which to extrapolate when conditions or materials outside previous experience arise. The present text refers primarily to metals and alloys, other (non-crystalline) solids are treated rather less fully. This is largely dictated by the state of knowledge at the present time, for although there is a large mass of data concerning the properties of non-metallic materials, much of this is empirical and a full explanation is made difficult by the complexities of an irregular initial structure. The book can be divided into the three sections covering constitution, properties, and significance of test data. Separate chapters discuss properties such as heterogeneity, elasticity, plasticity, and fracture. Subsequent chapters deal with tensile and hardness tests; creep, fatigue and impact tests; and the selection of engineering materials. Throughout the text the author has endeavored to confine the discussion to those aspects of materials science which appear to be reasonably well understood at the present time.

  • The Iron Blast Furnace

    Theory and Practice
    • 1 Edición
    • J. G. Peacey + 1 más
    • D. W. Hopkins
    • Inglés
    The Iron Blast Furnace: Theory and Practice presents the significant role of iron blast furnace by which iron is efficiently and rapidly reduced from ore and it is the basis for all primary steelmaking. This book discusses the importance of blast-furnace process as a complete operation. Organized into 14 chapters, this book begins with an overview of the existing experimental, theoretical, and operational evidence about the blast furnace. This text then examines the blast furnace from the outside, including its size, production rate, products, raw materials, operation, and costs. Other chapters consider the primary objective of the blast furnace to produce molten iron of constant composition. This book discusses as well the operation of the furnace from the point of view of what happens to the raw materials after they enter the furnace. The final chapter deals with the linear programming methods by using the known physical constraints on industrial furnaces. This book is a valuable resource for engineers.

  • Energy Conservation in the Design of Multi-Storey Buildings

    • 1 Edición
    • Henry J. Cowan
    • Inglés
    Energy Conservation in the Design of Multi-Storey Buildings documents the papers presented at an International Symposium held at The University of Sydney, 1-3 June 1983, sponsored by The University of Sydney, the International Association for Bridge and Structural Engineering, the Council for Tall Buildings and Urban Habitat, and the Institution of Engineers Australia. The volume contains 13 papers organized into two parts. Part I deals with predictive methods. It includes papers that describe the design of Australian projects where energy was a major issue; examine energy conservative building design from the standpoints of New York and Singapore; present a design tool for estimating energy consumption and costs; and consider limitations in the application of computers to the design of the airconditioning plant. Part II is devoted to energy management. The papers survey energy management in Australian office buildings and hospitals; describe energy audits in the United States; and discusses methods for the computer control of energy systems.

  • Timer/Generator Circuits Manual

    • 1 Edición
    • R. M. Marston
    • Inglés
    Timer/Generator Circuits Manual is an 11-chapter text that deals mainly with waveform generator techniques and circuits. Each chapter starts with an explanation of the basic principles of its subject followed by a wide range of practical circuit designs. This work presents a total of over 300 practical circuits, diagrams, and tables. Chapter 1 outlines the basic principles and the different types of generator. Chapters 2 to 9 deal with a specific type of waveform generator, including sine, square, triangular, sawtooth, and special waveform generators pulse. These chapters also include pulse generator, time IC generator, and waveform synthesizer circuits. Chapter 10 examines the characteristics of phase-locked loop circuits, while Chapter 11 looks into the miscellaneous applications of the ubiquitous "555" timer type of integrated circuit. The appendix presents a number of useful waveform generator design charts, as an aid to those readers who wish to design or modify generator circuits to their own specifications. This book will prove useful to practical design engineers, technicians, experimenters, and electronics students.

  • The Finite Element Method in Engineering

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • S. S. Rao
    • Inglés
    The Finite Element Method in Engineering introduces the various aspects of finite element method as applied to engineering problems in a systematic manner. It details the development of each of the techniques and ideas from basic principles. New concepts are illustrated with simple examples wherever possible. Several Fortran computer programs are given with example applications to serve the following purposes: to enable the reader to understand the computer implementation of the theory developed; to solve specific problems; and to indicate procedure for the development of computer programs for solving any other problem in the same area. The book begins with an overview of the finite element method. This is followed by separate chapters on numerical solution of various types of finite element equations; the general procedure of finite element analysis; the development higher order and isoparametric elements; and the application of finite element method for static and dynamic solid and structural mechanics problems like frames, plates, and solid bodies. Subsequent chapters deal with the solution of one-, two-, and three-dimensional steady state and transient heat transfer problems; the finite element solution of fluid mechanics problems; and additional applications and generalization of the finite element method.

  • Modified Polymers, Their Preparation and Properties

    Main Lectures Presented at the Fourth Bratislava Conference on Polymers, Bratislava, Czechoslovakia, 1-4 July 1975
    • 1 Edición
    • A. Romanov
    • Inglés
    Modified Polymers, Their Preparation and Properties brings together the main lectures presented at the Fourth Bratislava Conference on Polymers held in Bratislava, Czechoslovakia, on July 1-4, 1975. Contributors explore the properties of modified polymers and their preparation, covering topics ranging from radiation crosslinking of polyvinyl chloride (PVC) with ethylene glycol dimethacrylate to chemical modification of polymers and the influence of chemical structure on the properties of polymers. This book is comprised of eight chapters and begins with a discussion on crosslinking of PVC in the presence of ethylene glycol dimethacrylate, studied by microcalorimetry, electron spin resonance, and structure investigation. The next chapter examines some characteristic features of chemical transformations of polymers on three examples: reactions of various organo-lithium bases onto the ester carbonyls of polymethylmethacryla... (PMMA); reaction of phenyl-lithium onto the carbonyl groups of PMMA; and chemical modification of polyvinylalcohol by metallation and subsequent reactions of alkylhalides or of propane sulfone. Subsequent chapters focus on how chemical structure affects polymer properties; alternating copolymer graft copolymers; acrylonitrile block and graft copolymers; and problems of polymer modification and the reactivity of functional groups of macromolecules. The final chapter is devoted to the separation and characterization of block and graft copolymers by thin-layer chromatography. This monograph will be a valuable source of information for chemists.

  • Surface Science

    An introduction
    • 1 Edición
    • John Hudson
    • Inglés
    The whole field of surface science is covered in this work. Starting with a description of the structure and thermodynamics of clean surfaces, the book goes on to discuss kinetic theory of gases and molecular beam formation. This is followed by a largesection on gas-surface interactions, and another major section on energetic particle-surface interactions. The final chapter provides the background to crystal nucleation and growth. The approach adopted is interdisciplinary and slanted towards theexperimental side, with practical analytical techniques being used to illustrate general principles.

  • Bibliography on the Fatigue of Materials, Components and Structures

    1951-1960
    • 1 Edición
    • J. Y. Mann
    • Inglés
    Bibliography on the Fatigue of Materials, Components and Structures, Volume 2 is a list of references on the above subject spanning the years 1951-1960. The list of references is arranged chronologically according to the book's or paper's publication year. The Bibliography then lists the surname of the first author alphabetically in the respective year. When a paper gives no authors, it is listed at the end of the alphabetical listing of that year, in order of the publication date. The Bibliography also provides a subject and author index. The description that the volume uses is based on the titles of the paper or book. The text also lists the title in the original language of the paper, followed by an English translation. The volume contains more than 1,000 published materials from 30 countries. The topics these references cover are on the fundamental research made in the fatigue of materials; the determination of fatigue properties; the utilization of a different manufacturing methods; the various formulations to overcome occurrence of problems; and the development of design techniques. The style of numbering followed in this volume is a continuation of the numbering system used in Volume 1. The Bibliography can be used by physicists, scientists, and materials engineers to gain access to a wide variety of books, papers, and research on the above subject.

  • Strength of Materials

    • 1 Edición
    • A. A. Ilyushin + 1 más
    • Inglés
    Strength of Materials focuses on the resistance or strength of materials, which is described as the study of solid bodies under the action of external forces under working conditions, and of their resistance to deformation and failure. This book discusses problems on the equilibrium and stability of simple structural elements under elastic and elastic-plastic deformation, including the plastic flow of materials under pressure; creep and dynamic resistance of materials; vibrations and propagation of elastic and plastic waves; and effect of temperature, rate of deformation, and radiation on the strength and plasticity of materials. A description of the experimental techniques used in investigating the mechanical properties of materials is also outlined in this text. This publication is a good material in training research specialists in universities and technical institutes regarding the mechanics of solid deformable bodies.

  • Engineering

    Its Role and Function in Human Society
    • 1 Edición
    • William H. Davenport + 1 más
    • Inglés
    Engineering: Its Role and Function in Human Society illustrates the historical views held by humanists and technologists with regard to each other, the accomplishments of engineering in the past, and the problems involving laymen and men of science together in their relationships. Some of the topics covered are the aloofness from science and technology; hostility to technology; and acceptance of technology. The book also covers topics on the attitudes of the engineer; the use of engineering in relation to human needs; and engineering as a technological culture. The ultimate use of tools and machines; automation and human condition; pollution and pollutants; and causes of problems in engineering are also encompassed. Engineers and engineering students will find the book invaluable.

  • Phase Equilibrium in Mixtures

    International Series of Monographs in Chemical Engineering
    • 1 Edición
    • M. B. King
    • P. V. Danckwerts
    • Inglés
    Phase Equilibrium in Mixtures deals with phase equilibrium and the methods of correlating, checking, and predicting phase data. Topics covered range from latent heat and vapor pressure to dilute solutions, ideal and near-ideal solutions, and consistency tests. Molecular considerations and their use for the prediction and correlation of data are also discussed. Comprised of nine chapters, this volume begins with an introduction to the role of thermodynamics and the criteria for equilibrium between phases, along with fugacity and the thermodynamic functions of mixing. The discussion then turns to some of the phase phenomena which may be encountered in chemical engineering practice; methods of correlating and extending vapor pressure data and practical techniques for calculating latent heats from these data; the behavior of dilute solutions both at low and high pressures for reacting and non-reacting systems; and the behavior of ideal and near-ideal solutions. The remaining chapters explore non-ideal solutions at normal pressures; practical methods for testing the thermodynamic consistency of phase data; and the extent to which the broad aspects of phase behavior may be interpreted in the light of simple molecular considerations. This book is intended primarily for graduate chemical engineers but should also be of interest to those graduates in physics or chemistry who need to use phase equilibrium data.

  • Epitaxial Growth

    • 1 Edición
    • J. W. Matthews
    • Inglés
    Epitaxial Growth Part B is the second part of a collection of review articles that describe various aspects of the growth of single-crystal films on single-crystal substrates. The topics discussed are the nucleation of thin films, the structure of the interface between film and substrate, and the generation of defects during film growth. The methods used to prepare and examine thin films are described and a list of the overgrowth-substrate combinations studied so far is given.

  • Composite Steel and Concrete Structural Members

    Fundamental Behaviour
    • 1 Edición
    • D.J. Oehlers + 1 más
    • Inglés
    This book deals with the analysis and behaviour of composite structural members that are made by joining a steel component to a concrete component. The emphasis of the book is to impart a fundamental understanding of how composite structures work, so engineers develop a feel for the behaviour of the structure, often missing when design is based solely by using codes of practice or by the direct application of prescribed equations. It is not the object to provide quick design procedures for composite members, as these are more than adequately covered by recourse to such aids as safe load tables. The subject should therefore be of interest to practising engineers, particularly if they are involved in the design of non-standard or unusual composite structures for buildings and bridges, or are involved in assessing, upgrading, strengthening or repairing existing composite structures. The fundamentals in composite construction are covered first, followed by more advanced topics that include: behaviour of mechanical and rib shear connectors; local buckling; beams with few shear connectors; moment redistribution and lateral-distortional buckling in continuous beams; longitudinal splitting; composite beams with service ducts; composite profiled beams and profiled slabs; composite columns; and the fatigue design and assessment of composite bridge beams.

  • Transducer Handbook

    User's Directory of Electrical Transducers
    • 1 Edición
    • H B Boyle
    • David Page
    • Inglés
    When selecting or using a particular type of transducer or sensor, there are a number of factors which must be considered. The question is not only for what kind of measurement, but under what physical conditions, constraints of accuracy, and to meet which service requirements, is a transducer needed? This handbook is designed to meet the selection needs of anyone specifying or using transducers with an electrical output. Each transducer is described in an easy-to-use tabular format, giving all of the necessary data including operating principles, applications, range limits, errors, over-range protection, supply voltage requirements, sensitivities, cross sensitivities, temperature ranges and sensitivities and signal conditioning needs. The author has added notes that reflect his broad practical experience. Added to this is an extensive worldwide suppliers directory.

  • Aircraft Fatigue

    Design, Operational and Economic Aspects
    • 1 Edición
    • J. Y. Mann + 1 más
    • Inglés
    Aircraft Fatigue: Design, Operational and Economic Aspects contains the proceedings of the ""Symposium on Aircraft Fatigue—Design, Operational and Economic Aspects,"" held in Melbourne, Australia, on May 22-24, 1967. The papers explore the design and operational aspects of the fatigue problem in general aviation and transport aircraft, as well as the economic aspects of the fatigue problem as it affects both operators and manufacturers. This book is comprised of 21 chapters and begins with a description of an approach to structural reliability analysis based on order statistics and the expected time to first failure in a fleet of specified magnitude, along with its application to structures subject to progressive fatigue damage. The following chapters deal with structural load measurement and analysis; design and certification programs for a wide range of aircraft types including the Anglo-French and American civil supersonic transports; acoustic fatigue; and the design of joints. The detection of fatigue cracks in service and the effects of fatigue on the cost of design and operation of aircraft are also discussed. This monograph will be a useful resource for aircraft and aeronautical engineers as well as officials of civil aviation.

  • Fluidized Bed Boilers

    Design and Application
    • 1 Edición
    • Prabir Basu
    • Inglés
    Fluidized Bed Boilers: Design and Application attempts to address the need for a single source of information covering all major areas of fluidized bed boiler design and operation. It is based on the International Workshop on Design and Operation of Atmospheric Pressure Fluidized Bed Boilers, organized by the Center for Energy Studies, Technical University of Nova Scotia in Halifax on 24-45 June 1983. The volume begins by presenting a simplified approach to the design of a fluidized bed boiler and an overview of problems in fluidized-bed combustion (FBC). These are followed by separate chapters on the equations and concepts needed to estimate key hydrodynamic parameters; the key factors and terms to be considered in selecting FBC for specific applications; and principles in the design of air distributors for a fluidized bed boiler. Subsequent chapters discuss heat transfer to surfaces in fluidized beds; the pollution control of fluidized bed combustion of solid fuels; and materials selection in atmospheric fluidized bed combustion systems. The final two chapters are devoted to applications. These include the operational and performance results of TVA’s 20-MW Atmospheric Fluidized Bed Combustion (AFBC) Pilot Plant in Kentucky; and the performance of Canada's first commercial FBC boiler plant, located at CFB Summerside, PEI.

  • The Safe Transport of Radioactive Materials

    • 1 Edición
    • R. Gibson
    • Inglés
    The Safe Transport of Radioactive Materials is a handbook that details the safety guidelines in transporting radioactive materials. The title covers the various regulations and policies, along with the safety measures and procedures of radioactive material transport. The text first details the 1963 version of the IAEA regulation for the safe transport of radioactive materials; the regulation covers the classification of radionuclides for transport purposes and the control of external radiation hazards during the transport of radioactive materials. The next chapter deals with concerns in the implementation of the IAEA regulations on both national and international levels. Next, the selection presents a review of transport accidents and incidents. The text also covers the liability and insurance in the transport of radioactive materials, along with the U.K. practice on insurance and indemnity during the transport of radioactive materials. The book will be of great use to individuals involved in the nuclear power industry.

  • Transport and Distribution

    Made Simple
    • 1 Edición
    • Don Benson + 1 más
    • Inglés
    Transport and Distribution: Made Simple introduces the whole field of transport and physical distribution practiced in the 1970s. This book discusses the transport in the framework of production, components of a transport system, characteristics of different ways, and effect of traffic characteristics on terminals. The principles in the design of units of carriage, motive power at sea, and outline of the distribution process are also elaborated. This compilation likewise covers the documents for road haulage operations, development of the common transport policy, and control of rail transport. This text provides a wide range of examination syllabuses at an intermediate and higher level, covering the introductory syllabuses of the Chartered Institute of Transport and the Institute of Traffic Administration. This publication is ideal for H.N.C., H.N.D., and CNAA degree students majoring in transport option, as well as sociology students considering the impact of transport on the environment.

  • Lubrication

    A Practical Guide to Lubricant Selection
    • 1 Edición
    • A. R. Lansdown
    • Inglés
    Lubrication: A Practical Guide to Lubricant Selection provides a guide to modern lubrication practice in industry, with emphasis on practical application, selection of lubricants, and significant factors that determine suitability of a lubricant for a specific application. Organized into 13 chapters, this book begins with a brief theoretical opening chapter on the basic principles of lubrication. A chapter then explains the choice of lubricant type, indicating how to decide whether to use oil, grease, dry lubricant, or gas lubrication. Subsequent chapters deal with detailed selection of lubricating oils, oil systems, oil changing, greases, dry lubricants, gas lubrication, sealing, testing, monitoring, and handling of lubricants. The final chapter describes the main hazards associated with lubricants and some of the techniques for controlling those hazards. This book will be of value to technical staffs who use lubricants in their work; to students of mechanical, production, or maintenance engineering; and to others, such as buyers and storekeepers concerned with lubricants.

  • Electronic Inventions and Discoveries

    Electronics from Its Earliest Beginnings to the Present Day
    • 3 Edición
    • G. W. A. Dummer
    • Inglés
    Electronic Inventions and Discoveries: Electronics from Its Earliest Beginnings to the Present Day provides a summary of the development of the whole field of electronics. Organized into 13 chapters, the book covers and reviews the history of electronics as a whole and its aspects. The opening chapter covers the beginnings of electronics, while the next chapter discusses the development of components, transistors, and integrated circuits. The third chapter tackles the expansion of electronics and its effects on industry. The succeeding chapters discuss the history of the aspects of electronics, such as audio and sound reproduction, radio and telecommunications, radar, television, computers, robotics, information technology, and industrial and other applications. Chapter 10 provides a lists of electronic inventions according to subject, while Chapter 11 provides a concise description of each invention by date order. Chapter 12 enumerates the inventors of electronic devices. The last chapter provides a list of books about inventions and inventors. This book will appeal to readers who are curious about the development of electronics throughout history.

  • Present-Day Russian Psychology

    A Symposium by Seven Authors
    • 1 Edición
    • Neil O'Connor
    • Inglés
    Present-Day Russian Psychology: A Symposium by Seven Authors comprises the first comprehensive survey of Russian psychological literature that provides a sympathetic but critical account of Soviet psychology. This book focuses on three trends in Soviet psychology — first is the Pavlovian studies of conditioning and central nervous type; second are studies of verbal behavior; and third is the Georgian “set” theory. The chapters in this compilation include a statement on the orienting reflex and the voluntary control of motor behavior; survey of psychiatry; and view of the use of information theory and its increased popularity. Review of abnormal psychology and psychotherapy; analysis of psycholinguistic psychology; review of studies of child development; and account of a personal visit to Russian laboratories are also discussed. This publication is beneficial to psychology students and individuals researching on Soviet psychology.

  • Proceedings of the International Symposium on Engineering in Complex Rock Formations

    • 1 Edición
    • Li Chengxiang + 1 más
    • Inglés

  • Experimenting with Truth

    The Fusion of Religion with Technology, Needed for Humanity's Survival
    • 1 Edición
    • Rustum Roy
    • Inglés
    Experimenting with Truth: The Fusion of Religion with Technology, Needed for Humanity's Survival presents the insights of the mutually reinforcing aspects of the Christian faith and modern science. The book is composed of only three chapters and begins with an explanation of the technology's need for religion's hegemony. Chapter 2 attempts to show that science-based technology and religion share a common belief in the nature of the most fundamental reality. The last chapter details the most accurate, multidimensional picture or sculpture of reality.

  • DC Motors, Speed Controls, Servo Systems

    An Engineering Handbook
    • 3 Edición
    • Sam Stuart
    • Inglés
    DC Motors - Speed Controls - Servo Systems: An Engineering Handbook is a seven-chapter text that covers the basic concept, principles, and applications of DC and speed motors and servo systems. After providing the terminology, symbols, and systems of units, this book goes on dealing with the basic theory, motor comparison, and basic speed control methods of motors. The subsequent chapters describe the phase-locked servo systems and their optimization and applications. These topics are followed by a discussion of the developments made by Electro-Craft in the field of DC Brushless Motors. The final chapter provides revised data sheets on Electro-Craft products and describes the models in the motomatic range of speed controls, servomotor controls, and digital positioning systems. This handbook is of great value to professional engineers and engineering students.

  • Light and Heavy Vehicle Technology

    • 2 Edición
    • M.J. Nunney
    • Inglés
    Light and Heavy Vehicle Technology, Second Edition deals with the theory and practice of vehicle maintenance, procedure, and diagnosis of vehicle trouble, including technological advances such as four-wheel drive, four-wheel steering, and anti-lock brakes. The book reviews the reciprocating piston petrol engine, the diesel engine, the combustion chambers, and the different means of combustion processes. To counter friction, heat and wear, lubrication to the different moving parts is important. To counter excessive heat which can cause breakdown of lubricating oil films and materials such as gaskets, O-rings, the engine is designed with a cooling system that uses air, water, or engine coolants. Petrol engines use the carburation or injection type of fuel delivery; diesel engines use a high pressure system of fuel injection owing to the higher pressures existing in the diesel combustion chamber. The text explains the operation of the other parts of the vehicle including the ignition and starter system, emission controls, layshaft gearboxes, drive lines, and suspension systems. Heavy vehicles need highly efficient air brakes to stop them compared to the hydraulic brake systems used in smaller and lighter vehicles. The book is suitable for mechanical engineers, engine designers, students, and instructors in mechanical and automotive engineering.

  • Modern Practice in Servo Design

    International Series of Monographs in Electrical Engineering
    • 1 Edición
    • D. R. Wilson
    • Inglés
    International Series of Monographs in Electrical Engineering, Volume 2: Modern Practice in Servo Design focuses on servomechanics and feedback control systems. The selection first takes a look at basic servomechanism theory, including block diagrams, servo components and compensation, power amplification, absolute stability, transfer functions, and frequency response design methods. The book then discusses the design of a large servomechanism and development of the servo design, as well as digital servo techniques, effects of disturbances, performance specification, mechanical resonance, and completed control loop and its stability. The text describes the design of large antennas for radio telescope and satellite trackers. Topics include servo system performance, tracking accuracy requirements, closed loop performance, and dynamic performance. The book also takes a look at the application of analog computers to the design of a servomechanism and the use of hybrid computers in servo design. The selection is a valuable source of information for readers interested in servomechanics and feedback control systems.

Temas relacionados