Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • General Engineering Science in SI Units

    The Commonwealth and International Library: Mechanical Engineering Division
    • 1 Edición
    • G. W. Marr
    • N. Hiller
    • Inglés
    General Engineering Science in SI Units, Volume 2 focuses on engineering science. The volume first offers information on concurrent forces, including calculation of the resultant of two mutually perpendicular forces; equilibrium of a system of coplanar, concurrent forces; resolution and notation of forces; and equilibrium on a smooth inclined plane. The text then discusses velocity and acceleration. Topics include average velocity during uniformly accelerated motion; compounding and resolution of velocities; relative and angular velocities; and the relation of angular and linear velocities. The book takes a look at force and motion, power and energy, and strength of materials, including Newton's laws of motion, mass and inertia, power, efficiency, torque, elasticity, and ultimate strength. The volume also touches on heat and electricity. Topics include coefficient of cubical expansion of solids and liquids; maximum density of water; electromotive force and potential difference; and effect of temperature change on resistance. Electromagnetism and electronic induction are also discussed. The text is a primary reference for readers interested in engineering science.

  • Mechanics Today

    Volume 3
    • 1 Edición
    • S. Nemat-Nasser
    • Inglés
    Mechanics Today, Volume 3 provides the advances in the fields of solid and fluid mechanics and applied mathematics. This volume is divided into six chapters that discuss the fundamentals and analytical and experimental results of dynamic behavior of linear and nonlinear systems. Chapter I provides a formulation of the effective stiffness theory with equations of motion and boundary conditions presented for the case of plain strain motion. Chapter II summarizes some of the analytical results that have been obtained in an effort to improve understanding of elastodynamic fracture processes. Chapter III presents the matrix difference equations used to formulate problems related to random vibration of periodic and almost periodic structures, taking advantage of the identical construction of the interconnecting units. Chapter IV describes a basic approach to the Oseen problem through the use of integral representations of the velocity and pressure fields. Chapter V deals with an analysis of nonlinear gyroscopic systems and the motions of high-order nongyroscopic systems. Chapter VI focuses on the application of the WKB perturbation method in the study of static deformation, vibration, wave propagation, and instability of elastic bodies. This volume is of great value to solid and fluid mechanics specialists and also to non-specialists with sufficient background of the field.

  • Mechanics and Strength of Materials

    • 1 Edición
    • Volumen 1
    • Bogdan Skalmierski
    • Inglés
    Mechanics and Strength of Materials focuses on the methodologies used in studying the strength of materials. The text first discusses kinematics, and then describes the motion of a single particle; description of the motion of a rigid body; plane motion of a rigid body; and examples of the determination of velocities and accelerations in the motion of plane mechanism. The book explains the dynamics of a particle and statics, including the center of mass and gravity of a particle system; law of variation of angular momentum; analytical and graphical methods in the statics of plane systems; and spatial system of forces. The text also discusses the statics of elastic systems, and then describes the strength calculations of beams; problems of simple beam-bending; geometric moments of inertia; buckling problems of axially compressed rods; and simultaneous bending and torsion of rods with circular cross-section. The book focuses on the dynamics of rigid bodies, dynamics in relative motion, and fundamentals of analytical mechanics. The text further looks at vibrations of systems with one degree and many degrees of freedom. The book is a good source of data for readers interested in studying the strength of materials.

  • Geosynthetics in Filtration, Drainage and Erosion Control

    • 1 Edición
    • R.M. Koerner
    • Inglés
    Geosynthetics can, and have, played a pivotal role in providing the primary functions of filtration, drainage and erosion control. Within each category this book counterpoints the design, testing and performance of the various materials against one another. The facilitation of filtration by a number of different woven and non–woven geotextiles is discussed. Design is centred around a balance between open voids [for adequate permeability] and closed voids [for proper soil retention]. This balance is compromised by long term clogging or soil loss from either the upstream soil particles or by the nature of the permeating fluid. This is a major focal area of the book.One solution to excessive filter clogging is to open up the geotextile's voids and allow sediments and micro–organisms in the permeating fluid to pass through. The challenge then becomes the design and potential clogging of the drain. The drainage aspect of geosynthetics is the second focal area.Erosion control is closely related to both filtration and drainage. The tremendous design problems, and equally large repair problems on all types of facilities, are addressed. Highway slopes, earth dams, landfill covers and solid waste daily covers are a few common situations.

  • Probabilistic Approach to Mechanisms

    • 1 Edición
    • Volumen 8
    • B.Z. Sandler
    • Inglés
    This book discusses the application of probabilistics to the investigation of mechanical systems. The book shows, for example, how random function theory can be applied directly to the investigation of random processes in the deflection of cam profiles, pitch or gear teeth, pressure in pipes, etc. The author also deals with some other technical applications of probabilistic theory, including, amongst others, those relating to pneumatic and hydraulic mechanisms and roller bearings. Many of the aspects are illustrated by examples of applications of the techniques under discussion.

  • Engineering Principles for Electrical Technicians

    The Commonwealth and International Library: Electrical Engineering Division
    • 1 Edición
    • K. M. Smith + 1 más
    • N. Hiller
    • Inglés
    Engineering Principles for Electrical Technicians serves as an introduction to basic engineering principles. This book discusses several topics, including rectifier equipment, pole systems, capacitors, electrical energy, and operating torque. Organized into 23 chapters, this book begins with an overview of the different applications of forces, including gravitational, friction, accelerating, shear, tensile, and compressive force. This text then defines the center of gravity as the point through which the resultant weight acts in whatever position the body is placed. Other chapters consider the efficiency, velocity, and mechanical advantage of simple machines. This book discusses as well the value of the factor of safety that depends on the material being used and the circumstances under which the material will work. The final chapter deals with thermionic emission that is concerned with the production of charged particles at a heated surface. This book is a valuable resource for electrical, mechanical, and telecommunications technicians.

  • Marine Electrical, Practice

    • 5 Edición
    • G.O. Watson
    • Inglés
    Marine Electrical Practice: 5th Edition discusses the subject of marine electrical practice and takes into consideration the revolutionary changes in the field over the past 20 years. The book covers components such as generators, switchgears, rotary amplifiers, and voltage regulators; the insulation and temperature control of different machines; the distribution of electrical power; electromagnetic compatibility; and lighting. The book also contains helpful reference materials such as graphical symbols related to ship diagrams, organizations concerned with ships and shipbuilding, and units of measurement. The text is useful for nautical engineers and electrical engineers involved in offshore work, as it serves as both a guide and an update in the field of marine electrical practice.

  • MOS Integrated Circuit Design

    • 1 Edición
    • E. Wolfendale
    • Inglés
    MOS Integral Circuit Design aims to help in the design of integrated circuits, especially large-scale ones, using MOS Technology through teaching of techniques, practical applications, and examples. The book covers topics such as design equation and process parameters; MOS static and dynamic circuits; logic design techniques, system partitioning, and layout techniques. Also featured are computer aids such as logic simulation and mask layout, as well as examples on simple MOS design. The text is recommended for electrical engineers who would like to know how to use MOS for integral circuit design.

  • Marine Control, Practice

    • 1 Edición
    • D.A. Taylor
    • Inglés
    Marine Engineering Series: Marine Control Practice deals with the instrumentation and its associated control systems that are found onboard ships. The book covers topics such as the measuring instruments and control signals for different parameters; system analysis; process and kinetic control systems; and commercially available equipment. Also covered in the book are correcting units such as actuators and valves; the control systems for boilers, turbines, auxiliary equipment; and control involving computers. The text is recommended for those who need to complete the Certificates of Competency for Marine Engineers, including Extra First Class. The book will also be beneficial to offshore engineers.

  • Meeting the Pump Users Needs

    The Proceedings of the 12th International Pump Technical Conference
    • 1 Edición
    • Sam Stuart
    • Inglés
    Meeting the Pump Users Needs is a documentation of the 12th International Pump Technical Conference. Pump makers have always understood that their equipment provides an essential service to the pump users. Pumps have been designed and built to satisfy the needs of the user. The main thrust of this book is to share between users, specifiers, and makers their knowledge and experiences leading to better understanding of what the user needs now and would like for the future, and what the designer/maker can provide now and may be able to offer for the future. This book also describes an unusual method of calculating a head generated across a multistage pump when the impeller diameters are changed. The method leads to significantly larger calculated changes of head than predicted from the conventional affinity law approach. This text is a useful reference and source of information for engineering students and those conducting research on pump manufacturing.

  • Bearings

    A Tribology Handbook
    • 1 Edición
    • M. J. Neale
    • Inglés
    Bearings: A Tribology Handbook is a practical guide on bearings, based on materials published in the first edition of the Tribology Handbook. The handbook has been updated matching international requirements. The book is divided in four main parts. The first part is a description of different bearing types and forms pertaining to continuous and oscillatory movements. A selection of journal and thrust bearings as to their different load capacity, performance, and special environmental conditions is explained. The second part deals with the physical properties and load capacity of plain bearings. Other kinds of bearing, such as the dry rubbing bearings; porous metal bearings; grease, wick, and drip fed journal bearings; ring and disc fed journal bearings; steady load pressure fed journal bearings; high-speed bearings; and crankshaft bearings, are considered regarding their performance, maintenance, and suitability to specific conditions. The third part focuses on one type of bearing: the rolling bearing. The selection, composition, shaft and housing design, and fitting and mounting for this type is discussed. The last part explains special bearing types such as slide bearings, instrument jewels (which are a combination of a steel pivot and a synthetic sapphire jewel), and electromagnetic bearings that are essentially powerful electromagnets. The need for surface treatments and coatings is then explained for optimum usage. The handbook is useful for design engineers, mechanical engineers, and material researchers. Mechanical, aeronautical, and automotive students; car mechanics; and those interested in machine and car maintenance will find this handbook a handy reference.

  • Feature Extraction and Image Processing

    • 1 Edición
    • Mark Nixon
    • Inglés
    Focusing on feature extraction while also covering issues and techniques such as image acquisition, sampling theory, point operations and low-level feature extraction, the authors have a clear and coherent approach that will appeal to a wide range of students and professionals.

  • Advanced Materials Source Book

    • 1 Edición
    • Jon Binner + 2 más
    • Inglés
    Advanced Materials Source Book 1994-1995 presents the developments in the field of advanced materials. This book provides information regarding materials and products, legislation, patents, advances in processing and equipment, standards, and testing procedures. Organized into four chapters, this book begins with an overview of the international market trends, specific materials, or materials groups and appliances. This text then examines the applications and makes market projections on a wide range of specialty materials, including ceramics, biomaterials, electronic materials, and optical materials. Other chapters consider the healthy nature of predictions concerning Japan and parts of Europe, stating that Germany and Japan will lead the advanced structural ceramics market. This book discusses as well the developments concerning various materials. The final chapter presents a list of contact details for the organizations listed in the main text to allow the readers to make new contacts or to follow-up items of particular interest. This book is a valuable resource for private consumers.

  • Nonlinear Fiber Optics

    Formerly Quantum Electronics
    • 2 Edición
    • Govind P. Agrawal
    • Paul F. Liao
    • Inglés
    The field of nonlinear fiber optics has grown substantially since the First Edition of Nonlinear Fiber Optics, published in 1989. Like the First Edition, this Second Edition is a comprehensive, tutorial, and up-to-date account of nonlinear optical phenomena in fiber optics. It synthesizes widely scattered research material and presents it in an accessible manner for students and researchers already engaged in or wishing to enter the field of nonlinear fiber optics. Particular attention is paid to the importance of nonlinear effects in the design of optical fiber communication systems. This is a completely new book containing either new sections or major revisions in every chapter.

  • Environmental Chemistry

    The Earth-Air-Water Factory
    • 1 Edición
    • R. Raiswell + 1 más
    • Inglés
    Environmental Chemistry provides an introduction to fundamental concepts in environmental chemistry. The book emerged from a short lecture and practical course given to first year students in the School of Environmental Sciences, University of East Anglia. It adopts the earth-air-water factory as an analogue to illustrate the way in which chemical principles operate in the environment. The book traces the hydrological cycle and the chemical processes which occur as water, with its dissolved and particulate load, moves from the atmosphere onto the land surface, into rivers, lakes, and oceans and is eventually incorporated into marine sediment. A glossary of terms is provided for readers who do not have an extensive background in chemistry. Although aimed at first year students studying environmental sciences, chemistry, geology, biology, or other science subjects, this book should also appeal to sixth formers studying chemistry or other sciences to ""A"" level, as well as to anyone with (or willing to acquire) a basic knowledge of chemistry and interested in how the natural environment operates as a chemical system.

  • Hitchhikers' Guide to Electronics in the '90s

    • 1 Edición
    • David Manners
    • Inglés
    Hitchhikers Guide to Electronics in the ‘90s covers the advances in electronics in a historical context, the microchip technology, which is at the heart of all technological advances, and the major industrial electronics power houses. The book tackles what’s most interesting about electronics, such as the democratizing effects of technology, profits in electronics, and the importance of electronics, and then defines terminologies related to the componentry of the electronics industry. The text discusses the beneficiaries of electronics and the sectors of the electronics industry (i.e. computers, consumers, telecommunications, industrial, transportation, and military). The issues in chip technology including the importance of chips; vast cost of chip research and development and production; effect of erratic chip supplies on equipment companies; East/West imbalance in chip production; and the American and Japanese approaches to chip-making are also considered. The book concludes by describing the trends in electronics for the ‘90s, including the innovation, development, and rock-bottom cost of the technology. Students of electronics engineering and practicing electronics engineers will find this book useful.

  • Managing the Environment

    Business Opportunity and Responsibility
    • 1 Edición
    • John R. Beaumont + 2 más
    • Inglés
    Managing the Environment offers an interdisciplinary and multi-functional management approach to the environmental issues affecting business practice.Many of the books published on this subject have so far been written by environmental scientists or from a strictly economic viewpoint. Managing the Environment aims to redress the balance by considering the impacts of environmental issues on various management functions, including accounting and finance, marketing, production and operations, information systems and organizational behaviour and culture. Each chapter includes review and study questions, and case studies form an important part of the book.

  • Stability, Bifurcation and Postcritical Behaviour of Elastic Structures

    • 1 Edición
    • Volumen 39
    • M. Pignataro + 2 más
    • Inglés
    A comprehensive and systematic analysis of elastic structural stability is presented in this volume. Traditional engineering buckling concepts are discussed in the framework of the Liapunov theory of stability by giving an extensive review of the Koiter approach. The perturbation method for both nonlinear algebraic and differential equations is discussed and adopted as the main tool for postbuckling analysis. The formulation of the buckling problem for the most common engineering structures - rods and frames, plates, shells, and thin-walled beams, is performed and the critical load evaluated for problems of interest. In many cases the postbuckling analysis up to the second order is presented. The use of the Ritz-Galerkin and of the finite element methods is examined as a tool for approximate bifurcation analysis. The volume will provide an up-to-date introduction for non-specialists in elastic stability theory and methods, and is intended for graduate and post-graduate students and researchers interested in nonlinear structural analysis problems. Basic prerequisites are kept to a minimum, a familiarity with elementary algebra and calculus is all that is required of readers to make use of this book.

  • Surveying Instruments and their Operational Principles

    • 1 Edición
    • Volumen 62
    • L. Fialovszky
    • Inglés
    The book gives a detailed theoretical background of the constructional principles of instruments necessary for the most general tasks of surveying. Undergraduate and graduate students will find it very useful in surveying studies to get acquainted with the broad variety of instruments, both classical and new ones. At the same time, specialists in surveying will also find the book full of new material. The book contains about 600 pictures, including photographs and detailed descriptions of the most representative types of instrumentation. Older types of instruments already out of use, or used only occasionally, are described in broad outline, mentioning basic principles, methods of testing and possibilities for their modernization. New categories of instruments, such as gyroscopes, compensation levelling instruments, electronic theodolites, distance meters and tacheometers, are dealt with in more detail. Care has been taken to include the automation which is rapidly spreading in all fields of instrument manufacture, being necessary to reduce manual operations.The book is intended for builders, architects, technicians, teachers of surveying and professional manufacturers.

  • Advances in Project Scheduling

    • 1 Edición
    • R. Slowinski + 1 más
    • Inglés
    This multi-author volume, containing contributions from international experts in the field, presents recent developments in project scheduling for both theory and practice. It is organized in three parts: I. Basic deterministic models; II. Special deterministic models; III. Stochastic models. A variety of approaches is presented dealing with multiple-category resource constraints, different mathematical models of activities, and various project performance measures in single and multiobjective formulation. Exact and heuristic algorithms are presented for both deterministic and stochastic project description.The volume will be of special interest to scientists, students, decision makers, executive managers, consultants and practitioners involved in systems management or operations research, in particular in business, engineering, and finance, but also in other areas of pure and applied sciences.

  • Design of Welded Tubular Connections

    Basis and Use of AWS Code Provisions
    • 1 Edición
    • Volumen 37
    • P.W. Marshall
    • Inglés
    Although tubular structures are reasonably well understood by designers of offshore platforms, onshore applications often suffer from "learning curve" problems, particularly in the connections, tending to inhibit the wider use of tubes. This book was written primarily to help this situation. Representing 25 years of work by one of the pioneers in the field of tubular structures, the book covers research, synthesis of design criteria, and successful application to the practical design, construction, inspection, and lifetime monitoring of major structures. Written by the principal author of the AWS D1.1 Code Provisions for Tubular Structures this book is intended to be used in conjunction with the AWS Structural Welding Code - Steel, AWS D1.1-88 published by the American Welding Society, Miami, FL, USA. Users of this Code, writers of other codes, students and researchers alike will find it an indispensable source of background material in their work with tubular structures.

  • Stresses in Layered Shells of Revolution

    • 1 Edición
    • Volumen 24
    • V. Kovarik
    • Inglés
    Shell structures are key components in a very wide range of engineering enterprises. The theory of layered shells of revolution under the quasistatic action of loading and temperature is the subject of this book. The shells treated here are in general of an asymmetric sandwich structure. A linear theory is developed which allows for a transition to shells with less layers, that is two-layered and homogeneous structures.The first half of the book is concerned with orthotropic elastic shells. In particular, it includes the membrane theory of cylindrical, spherical and conical shells, and the bending theory of cylindrical shells, storage tanks and pressure-vessels. In each of the numerical examples considered, an attempt is made to map different regimes of structural behaviour.The second half of the book is devoted to viscoelastic shells. First the time-invariant hereditary theory is presented, describing the response of viscoelastic materials. According to the correspondence principle of this theory the actual viscoelastic shell may be replaced by a conjugate elastic one. In this way many of the results from the first half of the book can be put to good use even for viscoelastic shells. The time-dependent material characteristics are taken into account by means of the time-temperature principle.In an appendix (Part VI), the mathematical prerequisites are presented. With viscoelasticity comes the need to employ further mathematical disciplines; integral equations and integral transformations are usually encountered. Here, instead, a different concept has been chosen, the distributional concept of Laurent Schwartz, which allows many problems to be tackled in a simple formal way. In discussing the distribution theory, a level accessible to a technical reader has been maintained.The book is intended as a textbook for students and teachers of structural and aeronautical engineering. The book will also appeal to a broad range of practising engineers working in areas of aeronautical, civil, and mechanical engineering, as well as to those working for firms dealing with shell structures.

  • Landfill Closures

    Geosynthetics, Interface Friction and New Developments
    • 1 Edición
    • R.M. Koerner
    • Inglés
    It is toward investigating, discussing and presenting the various issues involved in solid waste closure that this book is focused. It consists of invited papers presented at the 4th Annual Geosynthetic Research Institute Seminar.The closure [capping] of completed or abandoned solid waste facilities present particular challenges, for example:★ there usually exists a very uncertain and random subsidence behaviour of the existing waste beneath the closure,★ the friction behaviour of the various interfaces that are involved in solid waste facilities is not established,★ there are numerous long term geosynthetic stability and durability issues that must be addressed, and★ there are an extremely large number of sites that require proper closure.These topics are addressed in the three sessions Geosynthetics in Landfill Closures, Interface Friction Considerations and Geocomposites Systems and New Materials. Current materials and basic techniques are reviewed and innovations discussed. Owners' perspectives and design considerations raised and specific problems such as liquid intrusion are addressed. The area of landfill closure simply begs innovation and the manufacturing sector is meeting the challenge. This gathering of expert opinions is an important document of the proper use of geosynthetics in landfill closure systems.

  • Rheological Fundamentals of Soil Mechanics

    • 1 Edición
    • Volumen 36
    • S.S. Vyalov
    • Inglés
    Soil rheology is a branch of soil mechanics investigating the origin of, and the time-dependent changes in the stressed and strained state of soil. The author of this book however interprets rheology as being the science concerned on the one hand with how the state of stress and strain is formed and altered in a body, and on the other, with the particulars of the body's behaviour failing to fit the traditional concepts of elasticity and plasticity. There are many instances where the actual behaviour of soil differs substantially from schematized concepts and by taking into account all the peculiarities of soil deformation, precise knowledge of soil properties can be obtained and analytical prediction thus improved. Such problems are tackled in this book.This book comprises three main parts. The first part deals with basic rheological concepts and terms, the physics of soil, principles of stress-strain theory, elasticity, plasticity and viscosity - all cardinal rheological properties. The second part explains the rheological processes taking place in soils, such as creep and long-term strength, which are examined by the author with allowance for nonlinear deformation. Along with the known phenomenological theories, attention is paid to the novel kinetic (physical) theory of deformations and long-term strength. The third part outlines the generalized theory of soil deformation. It explains why soil offers different resistances to tensional and compressional deformations and derives the generalized rheological equation of state, enabling the effect of the three stress tensor invariants on the changes in shape and volume to be taken into account. From the standpoint of the theory discussed, the penultimate chapter gives examples of solutions to some problems facing soil mechanics. The final chapter reviews mathematical models representing the actual behaviour of soil under load and provides numerical solutions for engineering problems obtained with the aid of computer models.Thus the book provides a wealth of information which will be of interest both to the practising geotechnical engineer as well as to teachers and students.

  • The Geotechnics of Real Materials: The &egr;<INF>g</INF>&egr;<INF>k</INF> Method

    • 1 Edición
    • Volumen 39
    • E.T. Hanrahan
    • Inglés
    This book provides a simple new approach to the problems of pressure and deformation associated with real materials. It introduces parameters used to provide original solutions to a wide range of problems. These include: pressure on silo walls and retaining walls (flexible and rigid), trench sheeting, shafts, pipes and tunnels; and settlements of foundations, roads, and embankments. The parameters are readily measured in standard triaxial apparatus, and are combined to provide a stress-strain-time relationship for the soil for specific drainage and boundary conditions.The first part of the book introduces topics relevant to the second part, i.e. standard geotechnical properties, soil testing, stress problems, earth pressure, flow in permeable media, and classical models such as elasticity and plasticity. In the second part, the parameters are defined and details given on their application to specified boundary conditions, with corrections for variations of stress, dimensions and loading rates. Examples and case histories demonstrate the versatility and validity of the method.No prior knowledge of geotechnics is assumed. The book will be suitable for students at any level in geotechnics and engineering geology. The emphasis on measured instead of idealised behaviour will appeal to practising engineers who will find in this book simple solutions to some of the most intractable problems in geotechnics.

  • Dynamic Behavior of Concrete Structures

    • 1 Edición
    • Volumen 44
    • Y.L. Mo
    • Inglés
    This book is concerned with the dynamic behavior of reinforced/prestress... concrete structures, such as: buildings and bridges. It discusses how to predict or check the real inelastic behavior of concrete structures subjected to dynamic loads, including equipment loads, earthquake motions, seismic interactions and missile impacts. A number of techniques have recently been developed to assist in evaluating such occurrences. This book is intended to apply structural dynamics to concrete structures and is appropriate as a textbook for an introductory course in dynamic behavior of concrete structures at the upper-undergraduate or graduate level as well as for practicing engineers.

  • Fresh Concrete

    Properties and Tests
    • 1 Edición
    • Volumen 38
    • P. Bartos
    • Inglés
    Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.

  • Auto Electronics Projects

    An Introduction to Your Car Electrics with Useful and Proven Self-Buld Projects
    • 1 Edición
    • Maplin
    • Inglés
    Many car owners find the mechanics of their vehicle relatively familiar ground, but struggle when faced with the electrics. Increasingly vehicle design depends on a bewildering array of more advanced electronics. This book helps the reader to understand more about car electrics and its workings, and therefore should help with fault diagnosis. It includes the latest developments such as electronic ignition, described in a way that is accessible to anyone with a basic grasp of electricity.In addition this is a collection of projects, each a practical, useful and proven design. These projects provide an array of elegant and affordable solutions from a digital tachometer, a lights-on warning indicator, a digital device to calculate fuel consumption, and some basic alarm and audio designs. Most importantly, all components and devices described in this book are readily available; readers can be confident of obtaining all the parts and equipment from Maplin either through their catalogue or their network of high street stores. Based on projects from Electronics, the Maplin Magazine, this compendium will spark the interest of anyone who wishes to put their electronics skills to good and fruitful use. Other books in the Maplin Series include: Starting Electronics - all you need to get a grounding in practical electronics. Computer Interfacing - a general introduction to computers covering all aspects of hardware and how they interface. Logic Design - an introduction to digital logic. Music Projects - straightforward design ideas to build. Audio IC Projects - a collection of useful circuits based on readily available chips. TV and Video Projects - a collection of useful and proven design ideas.

  • Radio Frequency Transistors

    Principles and practical applications
    • 1 Edición
    • Helge Granberg
    • Norman Dye
    • Inglés
    Cellular telephones, satellite communications and radar systems are adding to the increasing demand for radio frequency circuit design principles. At the same time, several generations of digitally-oriented graduates are missing the essential RF skills. This book contains a wealth of valuable design information difficult to find elsewhere.

  • Characterization in Silicon Processing

    • 1 Edición
    • Yale Strausser
    • Inglés
    This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.

  • Engineering Materials Volume 2

    An Introduction to Microstructures, Processing and Design
    • 2 Edición
    • David R.H. Jones + 1 más
    • Inglés
    Materials are evolving faster today than at any time in history. As a consequence the engineer must be more aware of materials and their potential than ever before. In comparing the properties of competing materials with precision involves an understanding of the basic properties of materials, how they are controlled by processing, formed, joined and finished and of the chain of reasoning that leads to a successful choice. This book will provide the reader with this understanding.Materi... are grouped into four classes: Metals, Ceramics, Polymers and Composites, and each are examined in turn. The chapters are arranged in groups, with a group of chapters to describe each of the four classes of materials. Each group first of all introduces the major families of materials that go to make up each materials class. The main microstructural features of the class are then outlined and the reader is shown how to process or treat them to get the structures (properties) that are wanted. Each group of chapters is illustrated by Case Studies designed to help the reader understand the basic material.This book has been written as a second level course for engineering students. It provides a concise introduction to the microstructures and processing of materials and shows how these are related to the properties required in engineering design.

  • West Europe

    • 21 Edición
    • Kenneth F. Wilson
    • Inglés
    Yearbook of World Electronics Data 1994, Volume 1: West Europe presents a review of the world electronics industries and markets with detailed estimates and forecasts of the size of the production and markets for electronic equipment and components in each country. The book also presents detailed country data on basic statistics and economic indicators, electronics industry, electronic production and market data, and trade balance. The text will serve as a guide for electronics engineers.

  • Components and Devices

    • 1 Edición
    • T. Koryu Ishii
    • Inglés
    Handbook of Microwave Technology, Volume I: Components and Devices is a compact reference tool which provides both the fundamentals and applications of microwave technology. This volume covers components and devices used in microwave circuits. Chapters in the book discuss topics on microwave transmission lines, microwave resonators, and microstrip line components. Microwave impedance matching techniques, applications of microwave thermionic density modulated devices, and microwave transistor oscillators and amplifiers are tackled as well. Technicians, scientists, engineers, and science and engineering students who are involved in microwave technology will find the text very useful.

  • Handbook of Digital Signal Processing

    Engineering Applications
    • 1 Edición
    • Douglas F. Elliott
    • Inglés
    FROM THE PREFACE: Many new useful ideas are presented in this handbook, including new finite impulse response (FIR) filter design techniques, half-band and multiplierless FIR filters, interpolated FIR (IFIR) structures, and error spectrum shaping.

  • Fundamentals of Metal-Matrix Composites

    • 1 Edición
    • Subra Suresh
    • Inglés
    `Metal-Matrix Composites' are being used or considered for use in a variety of applications in the automotive, aerospace and sporting goods industries. This book contains sixteen chapters, all written by leading experts in the filed, which focus on the processing, microstructure and characterization, mechanics and micromechanics of deformation, mechanics and micromechanics of damage and fracture, and practical applications of a wide variety of metal composites.A particularly noteworthy feature of this authoritative volume is its collection of state-of-the-art reviews of the relationships among processing, microstructural evolution, micromechanics of deformation and overall mechanical response.

  • Heat Pumps

    • 2 Edición
    • D.B.A. Macmichael
    • David Reay
    • Inglés
    A fully revised and extended account of the design, manufacture and use of heat pumps in both industrial and domestic applications. Topics covered include a detailed description of the various heat pump cycles, the components of a heat pump system - drive, compressor, heat exchangers etc., and the more practical considerations to be taken into account in their selection.

  • Venice Shall Rise Again

    Engineered Uplift of Venice Through Seawater Injection
    • 1 Edición
    • Giuseppe Gambolati + 1 más
    • Inglés
    The city of Venice, Italy, has been subjected to periodic flooding, or acqua alta, for centuries. Venice Shall Rise Again presents a unique proposition to halt this flooding. Based on years of work and experiment, experts Gambolati and Teatini describe an innovative yet technologically simple, economically inexpensive, and environmentally friendly project to raise Venice by 25-30 cm over ten years by injecting seawater into 650-1000 m deep geological formations. This project would be conducted under conditions of absolute safety, stability and integrity conserving the unique artistic and architectural patrimony of this deeply beloved city. Beginning with a brief history of the Venetian Republic, Venice Shall Rise Again addresses the actions undertaken by Venice to protect the city and the lagoon from the sea and land attack for more than a millennium, including the MoSE project, a system of mobile barriers presently under construction. Detailed in its engineering details and ideas, but with enough background information and context to help the interested reader understand the concepts, this book will be of interest to all readers concerned about the fate of Venice.

  • Modeling and Analysis of Real-Time and Embedded Systems with UML and MARTE

    Developing Cyber-Physical Systems
    • 1 Edición
    • Bran Selic + 1 más
    • Inglés
    Modeling and Analysis of Real-Time and Embedded Systems with UML and MARTE explains how to apply the complex MARTE standard in practical situations. This approachable reference provides a handy user guide, illustrating with numerous examples how you can use MARTE to design and develop real-time and embedded systems and software. Expert co-authors Bran Selic and Sébastien Gérard lead the team that drafted and maintain the standard and give you the tools you need apply MARTE to overcome the limitations of cyber-physical systems. The functional sophistication required of modern cyber-physical systems has reached a point where traditional code-centric development methods are proving less and less capable of delivering a reliable product in a timely manner. In Modeling and Analysis of Real-Time and Embedded Systems with UML and MARTE, you will learn how to take advantage of modern model-based engineering methods and corresponding industry standards to overcome these limitations. These methods take full advantage of computer-supported automation allowing timely detection of design flaws to reduce engineering risk, leading thereby to better overall product quality and greater productivity.

  • The ROV Manual

    A User Guide for Remotely Operated Vehicles
    • 2 Edición
    • Robert D Christ + 1 más
    • Inglés
    Written by two well-known experts in the field with input from a broad network of industry specialists, The ROV Manual, Second Edition provides a complete training and reference guide to the use of observation class ROVs for surveying, inspection, and research purposes. This new edition has been thoroughly revised and substantially expanded, with nine new chapters, increased coverage of mid-sized ROVs, and extensive information on subsystems and enabling technologies. Useful tips are included throughout to guide users in gaining the maximum benefit from ROV technology in deep water applications. Intended for marine and offshore engineers and technicians using ROVs, The ROV Manual, Second Edition is also suitable for use by ROV designers and project managers in client companies making use of ROV technology.

  • Theoretical and Applied Mechanics

    Proceedings of the XVIth International Congress of Theoretical and Applied Mechanics Held in Lyngby, Denmark, 19-25 August, 1984
    • 1 Edición
    • Frithiof I. Niordson + 1 más
    • Inglés
    Theoretical and Applied Mechanics covers the proceedings of the 16th International Congress of Theoretical and Applied Mechanics, held at the Technical University of Denmark, Lyngby, Denmark on August 19-25, 1984. The contributors consider the significant advances in the thriving field of mechanics. This book is composed of 21 chapters, and begins with an overview of space research contributions in understanding fluid media mechanics. This topic is followed by discussions on some aspects and fundamentals of mechanics, such as chaos, computer application, resonant phenomena, adiabaticity, and nonlinear acoustics. The following chapters explore the various applications of theoretical and applied mechanics, including in marine structures, oil recovery, and ice and snow mechanics. This book also deals with nonlinear wave motion, hydrodynamic systems, ocean wave spectra, and Helmholtz concept. The remaining chapters look into the issues of steady water bifurcation, concept of anisotropic soils, and flow visualization. This book is of great value to physicists and research workers who wish to expand their knowledge in mechanics.

  • Modelling Freight Transport

    • 1 Edición
    • Lorant Tavasszy + 1 más
    • Inglés
    Freight Transport Modelling is a unique new reference book that provides insight into the state-of-the-art of freight modelling. Focusing on models used to support public transport policy analysis, Freight Transport Modelling systematically introduces the latest freight transport modelling approaches and describes the main methods and techniques used to arrive at operational models. As freight transport has grown exponentially in recent decades, policymakers now need to include freight flows in quantitative evaluations of transport systems. Whereas early freight modelling practice was inspired by passenger transport models, by now it has developed its separate stream of methods and techniques inspired by disciplines such as economic geography and supply chain management. Besides summarizing the latest achievements in fundamental research, this book describes the state of practice and advises practitioners on how to cope with typical challenges such as limitations in data availability.

  • Fluid Mechanics and Thermodynamics of Turbomachinery

    • 7 Edición
    • S. Larry Dixon + 1 más
    • Inglés
    Fluid Mechanics and Thermodynamics of Turbomachinery is the leading turbomachinery book due to its balanced coverage of theory and application. Starting with background principles in fluid mechanics and thermodynamics, the authors go on to discuss axial flow turbines and compressors, centrifugal pumps, fans, and compressors, and radial flow gas turbines, hydraulic turbines, and wind turbines. In this new edition,more coverage is devoted to modern approaches to analysis and design, including CFD and FEA techniques. Used as a core text in senior undergraduate and graduate level courses this book will also appeal to professional engineers in the aerospace, global power, oil & gas and other industries who are involved in the design and operation of turbomachines.

  • LTE-Advanced

    A Practical Systems Approach to Understanding 3GPP LTE Releases 10 and 11 Radio Access Technologies
    • 1 Edición
    • Sassan Ahmadi
    • Inglés
    LTE-Advanced: A Practical Systems Approach to Understanding 3GPP LTE Releases 10 and 11 Radio Access Technologies is an in-depth, systematic and structured technical reference on 3GPP's LTE-Advanced (Releases 10 and 11), covering theory, technology and implementation, written by an author who has been involved in the inception and development of these technologies for over 20 years. The book not only describes the operation of individual components, but also shows how they fit into the overall system and operate from a systems perspective. Uniquely, this book gives in-depth information on upper protocol layers, implementation and deployment issues, and services, making it suitable for engineers who are implementing the technology into future products and services. Reflecting the author's 25 plus years of experience in signal processing and communication system design, this book is ideal for professional engineers, researchers, and graduate students working in cellular communication systems, radio air-interface technologies, cellular communications protocols, advanced radio access technologies for beyond 4G systems, and broadband cellular standards.

  • Essential PTC® Mathcad Prime® 3.0

    A Guide for New and Current Users
    • 1 Edición
    • Brent Maxfield
    • Inglés
    Learn how to use PTC® Mathcad Prime® 3.0, one of the world’s leading tools for technical computing, in the context of engineering, science, and math applications. Quickly harness the power of PTC Mathcad Prime 3.0 to solve both simple and complex problems. Essential PTC® Mathcad Prime® 3.0 is perfect for college students, first-time users, and experienced Mathcad 15 users who are moving to PTC Mathcad Prime 3.0. Updated from Maxfield’s popular Essential Mathcad, this book introduces the most powerful functions and features of the new PTC Mathcad Prime 3.0 software and teaches how to apply them to create comprehensive calculations for any quantitative subject. Examples from several fields demonstrate the power and utility of PTC Mathcad’s tools while also demonstrating how users can eff ectively incorporate Microsoft® Excel spreadsheets into the software.

  • Flight Dynamics Principles

    • 1 Edición
    • Michael V. Cook
    • Inglés
    Flight dynamicists today need not only a thorough understanding of the classical stability and control theory of aircraft, but also a working appreciation of flight control systems and consequently a grounding in the theory of automatic control. In this text the author fulfils these requirements by developing the theory of stability and control of aircraft in a systems context.The key considerations are introduced using dimensional or normalised dimensional forms of the aircraft equations of motion only and through necessity the scope of the text will be limited to linearised small perturbation aircraft models. The material is intended for those coming to the subject for the first time and will provide a secure foundation from which to move into non-linear flight dynamics, simulation and advanced flight control. Placing emphasis on dynamics and their importance to flying and handling qualities it is accessible to both the aeronautical engineer and the control engineer.

  • An Introduction to the Theory of Diffraction

    The Commonwealth and International Library: Materials Science and Technology
    • 1 Edición
    • C. J. Ball
    • G. E. Bacon
    • Inglés
    An Introduction to the Theory of Diffraction presents the fundamentals of diffraction theory. This book discusses other topics, such as absorption in cylindrical or slab-shaped specimens, which do not closely involve the fundamentals of diffraction. Organized into seven chapters, this book begins with an overview of the fundamentals of wave motion and a short account of the interaction of atoms with X-ray, electrons, and neutrons. This text then examines the differences between atomic scattering factors for the various radiations. Other chapters consider a number of problems in which the distribution of scattering sources is either one-dimensional in nature or can be reduced to one dimension. This book discusses as well the principle of superposition, which ensures that Fourier analysis has an application to diffraction theory. The final chapter deals with the importance of reciprocal lattice on the relation it bears to the crystal lattice. This book is a valuable resource for metallurgists.

  • Proceedings of the Ninth International Cryogenic Engineering Conference, Kobe, Japan, 11-14 May 1982

    • 1 Edición
    • K. Yasukochi + 1 más
    • Inglés
    Proceedings of the Ninth International Cryogenic Engineering Conference, Kobe, Japan, 11-14 May 1982 contains the papers presented during the entirety of the conference. The overall focus is on the presentation of technical developments and new applications in the field of cryogenics. The topics covered during the conference include high speed magnetic levitation train, magnetic fusion energy and its cryogenic applications, and cooling effects in a vortex cooler. Superconductivity and fusion, digital applications of the Josephson effect, thermally activated stirling cryocooler, and large cryogenic systems of the energy doubler are discussed as well. Physicists, chemists, engineers, and researchers in the field of cryogenics will find the compendium very insightful.

  • Advances in Machine Tool Design and Research 1967

    Proceedings of the 8th International M.T.D.R. Conference (Incorporating the 2nd International CIRP Production Engineering Research Conference), the University of Manchester Institute of Science and Technology, September 1967
    • 1 Edición
    • S. A. Tobias + 1 más
    • Inglés
    Advances in Machine Tool Design and Research 1967, Part 2 provides information pertinent to the development of machine tool design. This book discusses the advances in pneumatic positioning device in the machine tool laboratories. Organized into 41 chapters, this book starts with an overview of the pneumatic digital and analogue elements used in designing the control loop. This text then explains the control system for the cylindrical grinding process developed by fluid logic elements and the diaphragm-type fluid logic element used in the control system. Other chapters consider the causes of inaccuracies on a finished machined workpiece produced by a numerically controlled machine tool. This book discusses as well the machine errors that are corrected by instrumentation, the details of this installation, and the characteristics of the instrumentation required. The final chapter deals with the basic characteristics of material flow during closed die forging. This book is a valuable resource for production and mechanical engineers.

  • Mechanical Behaviour of Materials

    Proceedings of the Fourth International Conference, Stockholm, Sweden, 15-19 August 1983
    • 1 Edición
    • J. Carlsson
    • Inglés
    Mechanical Behaviour of Materials — IV is a collection of papers dealing with engineering issues of the strength of materials, solid mechanics, and materials science. One paper analyzes the growth of subcritical cracks subject to cyclic stresses as a result of fatigue or material microstructure. Another paper shows the retention of maximum strength of some aircraft parts which have been in service for up to 20 years, and subjected to stress and exposure cycles, due in part to the usage of high quality surface paint. One paper discusses the regularities in deformation and failure of structural steels and alloys at cryogenic temperatures under conditions of static and cyclic (low-cycle) loading. The paper shows that the type of stress is evident in materials which lose their plastic properties as the temperature decreases. The materials parameters that affect plastic instability and sheet formability are strain hardening, strain rate sensitivity, and plastic anisotrophy. Experiments indicate the importance of stress state, large strains, and path changes on the strain hardening response and subsequent stability of the material. Another paper describes the relationship between microstructure and hydrogen embrittlement in aspects of fracture mechanics, as well as the correlation between hydrogen embrittlement and carbon equivalent. The collection can prove valuable for structural engineers, materials engineers, design engineers, and investigators involved in the study of the strength of materials.

  • 4G: LTE/LTE-Advanced for Mobile Broadband

    • 2 Edición
    • Erik Dahlman + 2 más
    • Inglés
    This book focuses on LTE with full updates including LTE-Advanced (Release-11) to provide a complete picture of the LTE system. Detailed explanations are given for the latest LTE standards for radio interface architecture, the physical layer, access procedures, broadcast, relaying, spectrum and RF characteristics, and system performance. Key technologies presented include multi-carrier transmission, advanced single-carrier transmission, advanced receivers, OFDM, MIMO and adaptive antenna solutions, radio resource management and protocols, and different radio network architectures. Their role and use in the context of mobile broadband access in general is explained, giving both a high-level overview and more detailed step-by-step explanations. This book is a must-have resource for engineers and other professionals in the telecommunications industry, working with cellular or wireless broadband technologies, giving an understanding of how to utilize the new technology in order to stay ahead of the competition. New to this edition: In-depth description of CoMP and enhanced multi-antenna transmission including new reference-signal structures and feedback mechanisms Detailed description of the support for heterogeneous deployments provided by the latest 3GPP release Detailed description of new enhanced downlink control-channel structure (EPDDCH) New RF configurations including operation in non-contiguous spectrum, multi-bands base stations and new frequency bands Overview of 5G as a set of well-integrated radio-access technologies, including support for higher frequency bands and flexible spectrum management, massive antenna configurations, and ultra-dense deployments

Temas relacionados