Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Energy Systems

    Adaptive Complexity
    • 1 Edición
    • T. Ohta
    • Inglés
    This book consists mainly of revised versions of the papers presentedat the "Energy Systems and Technologies: as Approached from Adaptive Complexity" symposium sessions during the 4th International Conference on "NewEnergy Systems and Conversions" (20-30 June 1999; Osaka University, Japan), as well assome pertinent additional research reports.In order to realise the adaptive complexity of a system, it is necessary to know the energy conversion mechanisms of the media. This book details a wide range of situations in which adaptive complexity can be applied and found, from predicting air-flow in a room to describing turbulence as a complex system. The idea of approaching both the study of energy systems and energy technologies from the adaptive complexity aspect is new, and still a very much developing field.These pioneering articles discuss not only previous, but also pending problems.

  • The Grouting Handbook

    A Step-by-Step Guide for Foundation Design and Machinery Installation
    • 2 Edición
    • Donald M. Harrison
    • Inglés
    Minimize loss of revenue and the downtime of critical assets by avoiding foundation cracking, poor bonds, and initial alignment changes. After their successful introduction as a maintenance material, machinery grouts are now being used for equipment placement in new construction. While certainly suitable for both markets and applications, a successful installation depends on proper grout selection, application, foundation preparation, and forming methods. Therefore, guidelines on their uses and limitations are needed for engineers and maintenance personnel. Based on 45 years of field experience, The Grouting Handbook collects a vast amount of information into a practical and user-friendly reference for mechanical and civil engineers. The book focuses on four basic elements of grouting: The soil and its load-carrying capability; The foundation and its mass, design, concrete mix, installation and curing procedures; Anchor bolt technology, design and installation; Epoxy grout comparison, material selection and installation. From the ground up, The Grouting Handbook takes you step by step through the grouting process. Clear, straightforward directions give you details on preparing the foundation and surface and selecting the best material and method. Comprehensive yet concise, this is a convenient handbook for veteran and rookie engineers alike.

  • Fundamentals of Femtosecond Optics

    • 1 Edición
    • S A Kozlov + 1 más
    • Inglés
    Femtosecond optics involves the study of ultra-short pulses of light. Understanding the behaviour of these light pulses makes it possible to develop ultra-fast lasers with a wide range of applications in such areas as medical imaging, chemical analysis and micro-machining. Written by two leading experts in the field, this book reviews the theory of the interaction of femtosecond light pulses with matter, femtosecond lasers and laser systems, and the principles of femtosecond coherent spectroscopy of impurity amorphous media.

  • Fluid Mechanics for Industrial Safety and Environmental Protection

    • 1 Edición
    • Volumen 3
    • T.K. Fannelöp
    • Inglés
    Applications of the science of fluid mechanics to the new and expanding fields of industrial safety and environmental protection are discussed in this volume. The material is organized in accordance with the chain-of-events in real accidents, starting with the loss of containment of hazardous fluids, going on to the spreading and mixing processes in water or air, and ending with the damage loads caused by explosions, fires or toxic content.To develop solutions relevant to the wide range of problems considered, it is necessary to draw on material from various branches of fluid mechanics, i.e. from the engineering fields (aero- and gas- and hydrodynamics, hydraulics, heat transfer and two-phase flows) as well as from geophysics (environmental flows, boundary-layer meteorology). The relevant solutions are developed from the fundamental equations, but are kept simple for transparency and understanding. To achieve this, the simplifications offered by scaling, similarity and entrainment concepts are used extensively. Many of the solutions are novel but have been confirmed by laboratory experiments.The material in the book has been used as a teaching text on Master's level, but the content will be useful also for practising engineers and scientists engaged in safety and environmental impact. The problems considered have been encountered in consultancy work for industry and government agencies. The coherent presentation and the fundamental basis for analytical developments, makes the material accessible also to readers not acquainted with the field.

  • Electromagnetic Surface Waves

    A Modern Perspective
    • 1 Edición
    • John Polo + 2 más
    • Inglés
    For decades, the surface-plasmon-pola... wave guided by the interface of simple isotropic materials dominated the scene. However, in recent times research on electromagnetic surface waves guided by planar interfaces has expanded into new and exciting areas. In the 1990's research focused on advancing knowledge of the newly discovered Dyakonov wave. More recently, much of the surface wave research is motivated by the proliferation of nanotechnology and the growing number of materials available with novel properties. This book leads the reader from the relatively simple surface-plasmon-pola... wave with isotropic materials to the latest research on various types of electromagnetic surface waves guided by the interfaces of complex materials enabled by recent developments in nanotechnology. This includes: Dyakonov waves guided by interfaces formed with columnar thin films, Dyakonov-Tamm waves guided by interfaces formed with sculptured thin films, and multiple modes of surface-plasmon-pola... waves guided by the interface of a metal and a periodically varying dielectric material.

  • Developments in Fiber-Reinforced Polymer (FRP) Composites for Civil Engineering

    • 1 Edición
    • Nasim Uddin
    • Inglés
    The use of fiber-reinforced polymer (FRP) composite materials has had a dramatic impact on civil engineering techniques over the past three decades. FRPs are an ideal material for structural applications where high strength-to-weight and stiffness-to-weight ratios are required. Developments in fiber-reinforced polymer (FRP) composites for civil engineering outlines the latest developments in fiber-reinforced polymer (FRP) composites and their applications in civil engineering.Part one outlines the general developments of fiber-reinforced polymer (FRP) use, reviewing recent advancements in the design and processing techniques of composite materials. Part two outlines particular types of fiber-reinforced polymers and covers their use in a wide range of civil engineering and structural applications, including their use in disaster-resistant buildings, strengthening steel structures and bridge superstructures.With its distinguished editor and international team of contributors, Developments in fiber-reinforced polymer (FRP) composites for civil engineering is an essential text for researchers and engineers in the field of civil engineering and industries such as bridge and building construction.

  • Tribology of Polymeric Nanocomposites

    Friction and Wear of Bulk Materials and Coatings
    • 2 Edición
    • Volumen 55
    • Klaus Friedrich + 1 más
    • Inglés
    Tribology of Polymeric Nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications. Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in action in tribological applications.

  • Advances in Analog and RF IC Design for Wireless Communication Systems

    • 1 Edición
    • Gabriele Manganaro + 1 más
    • Inglés
    Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design.

  • Micromechanics of Composites

    Multipole Expansion Approach
    • 1 Edición
    • Volodymyr Kushch
    • Inglés
    Micromechanics of Composites: Multipole Expansion Approach is the first book to introduce micromechanics researchers to a more efficient and accurate alternative to computational micromechanics, which requires heavy computational effort and the need to extract meaningful data from a multitude of numbers produced by finite element software code. In this book Dr. Kushch demonstrates the development of the multipole expansion method, including recent new results in the theory of special functions and rigorous convergence proof of the obtained series solutions. The complete analytical solutions and accurate numerical data contained in the book have been obtained in a unified manner for a number of the multiple inclusion models of finite, semi- and infinite heterogeneous solids. Contemporary topics of micromechanics covered in the book include composites with imperfect and partially debonded interface, nanocomposites, cracked solids, statistics of the local fields, and brittle strength of disordered composites.

  • Sulfuric Acid Manufacture

    Analysis, Control and Optimization
    • 2 Edición
    • Matt King + 2 más
    • Inglés
    By some measure the most widely produced chemical in the world today, sulfuric acid has an extraordinary range of modern uses, including phosphate fertilizer production, explosives, glue, wood preservative and lead-acid batteries. An exceptionally corrosive and dangerous acid, production of sulfuric acid requires stringent adherence to environmental regulatory guidance within cost-efficient standards of production. This work provides an experience-based review of how sulfuric acid plants work, how they should be designed and how they should be operated for maximum sulfur capture and minimum environmental impact. Using a combination of practical experience and deep physical analysis, Davenport and King review sulfur manufacturing in the contemporary world where regulatory guidance is becoming ever tighter (and where new processes are being required to meet them), and where water consumption and energy considerations are being brought to bear on sulfuric acid plant operations. This 2e will examine in particular newly developed acid-making processes and new methods of minimizing unwanted sulfur emissions. The target readers are recently graduated science and engineering students who are entering the chemical industry and experienced professionals within chemical plant design companies, chemical plant production companies, sulfuric acid recycling companies and sulfuric acid users. They will use the book to design, control, optimize and operate sulfuric acid plants around the world.

  • Optical Fiber Telecommunications Volume VIB

    Systems and Networks
    • 6 Edición
    • Ivan Kaminow + 2 más
    • Inglés
    Optical Fiber Telecommunications VI (A&B) is the sixth in a series that has chronicled the progress in the R&D of lightwave communications since the early 1970s. Written by active authorities from academia and industry, this edition brings a fresh look to many essential topics, including devices, subsystems, systems and networks. A central theme is the enabling of high-bandwidth communications in a cost-effective manner for the development of customer applications. These volumes are an ideal reference for R&D engineers and managers, optical systems implementers, university researchers and students, network operators, and investors. Volume A is devoted to components and subsystems, including photonic integrated circuits, multicore and few-mode fibers, photonic crystals, silicon photonics, signal processing, and optical interconnections. Volume B is devoted to systems and networks, including advanced modulation formats, coherent detection, Tb/s channels, space-division multiplexing, reconfigurable networks, broadband access, undersea cable, satellite communications, and microwave photonics.

  • Machining and Machine-tools

    Research and Development
    • 1 Edición
    • J. Paulo Davim + 1 más
    • Inglés
    This book is the third in the Woodhead Publishing Reviews: Mechanical Engineering Series, and includes high quality articles (full research articles, review articles and case studies) with a special emphasis on research and development in machining and machine-tools. Machining and machine tools is an important subject with application in several industries. Parts manufactured by other processes often require further operations before the product is ready for application. Traditional machining is the broad term used to describe removal of material from a work piece, and covers chip formation operations including: turning, milling, drilling and grinding. Recently the industrial utilization of non-traditional machining processes such as EDM (electrical discharge machining), LBM (laser-beam machining), AWJM (abrasive water jet machining) and USM (ultrasonic machining) has increased. The performance characteristics of machine tools and the significant development of existing and new processes, and machines, are considered. Nowadays, in Europe, USA, Japan and countries with emerging economies machine tools is a sector with great technological evolution.

  • Electrostatic Propulsion

    • 1 Edición
    • David Langmuir
    • Inglés
    Electrostatic Propulsion focuses on issues, trends, and developments in electrostatic propulsion. The compilation is composed of technical papers primarily based on the symposium of the American Rocket Society held at the U. S. Naval Postgraduate School in Monterey, California on November 3–4, 1960. The book presents an investigation of the performance of ion rockets employing electron-bombardment ion sources. It also underscores the value of duoplasmatron in ion propulsion. The compilation then looks at the development of a negative ion source. Calibration of mass spectrometer, description of ion source, and the theory of surface ionization are described. The book also discusses experiments on oscillating-electron plasma source; the theory of ion emission from porous media; and the effects of surface structure and adsorption on the ionization efficiency of a surface ionization source. The text also considers a number of experiments, including the space-charge theory for ion beams, circular beam neutralization, and transient and steady state behavior in cesium ion beams. The book is a good source of information for readers wanting to study electrostatic propulsion.

  • Optical Fiber Telecommunications Volume VIA

    Components and Subsystems
    • 6 Edición
    • Ivan Kaminow + 2 más
    • Inglés
    Optical Fiber Telecommunications VI (A&B) is the sixth in a series that has chronicled the progress in the R&D of lightwave communications since the early 1970s. Written by active authorities from academia and industry, this edition brings a fresh look to many essential topics, including devices, subsystems, systems and networks. A central theme is the enabling of high-bandwidth communications in a cost-effective manner for the development of customer applications. These volumes are an ideal reference for R&D engineers and managers, optical systems implementers, university researchers and students, network operators, and investors. Volume A is devoted to components and subsystems, including photonic integrated circuits, multicore and few-mode fibers, photonic crystals, silicon photonics, signal processing, and optical interconnections.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 177
    • Inglés
    Advances in Imaging and Electron Physics features cutting-edge articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Infrared and Millimeter Waves V7

    Coherent Sources and Applications, Part-II
    • 1 Edición
    • Kenneth J. Button
    • Inglés

  • Combined Power Plants

    Including Combined Cycle Gas Turbined CCGT Plants
    • 1 Edición
    • J Horlock
    • W. A. Woods
    • Inglés

  • Image Recovery: Theory and Application

    • 1 Edición
    • Henry Stark
    • Inglés
    Image Recovery: Theory and Application focuses on signal recovery and synthesis problems. This book discusses the concepts of image recovery, including regularization, the projection theorem, and the pseudoinverse operator. Comprised of 13 chapters, this volume begins with a review of the basic properties of linear vector spaces and associated operators, followed by a discussion on the Gerchberg-Papoulis algorithm. It then explores image restoration and the basic mathematical theory in image restoration problems. The reader is also introduced to the problem of obtaining artifact-free computed tomographic reconstruction. Other chapters consider the importance of Bayesian approach in the context of medical imaging. In addition, the book discusses the linear programming method, which is particularly important for images with large number of pixels with zero value. Such images are usually found in medical imaging, microscopy, electron microscopy, and astronomy. This book can be a valuable resource to materials scientists, engineers, computed tomography technologists, and astronomers.

  • The Science and Technology of Rubber

    • 4 Edición
    • James E. Mark + 2 más
    • Inglés
    The 4e of The Science and Technology of Rubber provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in previous editions, the emphasis remains on a unified treatment of the material, exploring chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Updated material stresses the continuous relationship between ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. Exciting new developments in green tire manufacturing and tire recycling are covered.

  • Semiconductor Lasers

    Fundamentals and Applications
    • 1 Edición
    • Alexei Baranov + 1 más
    • Inglés
    Semiconductor lasers have important applications in numerous fields, including engineering, biology, chemistry and medicine. They form the backbone of the optical telecommunications infrastructure supporting the internet, and are used in information storage devices, bar-code scanners, laser printers and many other everyday products. Semiconductor lasers: Fundamentals and applications is a comprehensive review of this vital technology.Part one introduces the fundamentals of semiconductor lasers, beginning with key principles before going on to discuss photonic crystal lasers, high power semiconductor lasers and laser beams, and the use of semiconductor lasers in ultrafast pulse generation. Part two then reviews applications of visible and near-infrared emitting lasers. Nonpolar and semipolar GaN-based lasers, advanced self-assembled InAs quantum dot lasers and vertical cavity surface emitting lasers are all considered, in addition to semiconductor disk and hybrid silicon lasers. Finally, applications of mid- and far-infrared emitting lasers are the focus of part three. Topics covered include GaSb-based type I quantum well diode lasers, interband cascade and terahertz quantum cascade lasers, whispering gallery mode lasers and tunable mid-infrared laser absorption spectroscopy.With its distinguished editors and international team of expert contributors, Semiconductor lasers is a valuable guide for all those involved in the design, operation and application of these important lasers, including laser and telecommunications engineers, scientists working in biology and chemistry, medical practitioners, and academics working in this field.

  • Theory Of Optimal Experiments

    • 1 Edición
    • V.V. Fedorov
    • Inglés

  • Radioastronomical Methods of Antenna Measurements

    • 1 Edición
    • A.D. Kuzmin
    • Inglés

  • Human Responses to Environmental Odors

    • 1 Edición
    • Amos Turk
    • Inglés
    Human Responses to Environmental Odors presents some of the approaches to the study of the human olfactory response. This book contains 11 chapters that describe the complexity in human olfaction. This text deals first with the sensory and physicochemical aspects of odor. These topics are followed by discussions on the sampling, transport, dispersal, odor intensities and preferences, and psychophysical scaling. The discussion then shifts to the applications of some previously slighted fundamentals, such as vapor pressure phenomena and the chemical stability of odorants in the atmosphere. Other chapters are devoted to community odor problems and annoyance reactions, combustion odors, and laser Raman spectroscopy. These chapters include odor measurement and control. This book is of great value to flavor scientists, chemists, physiologists, and behavioral scientists.

  • Advances in Shape Memory Polymers

    • 1 Edición
    • Jinlian Hu
    • Inglés
    Shape memory materials are immensely useful because of their capability to recover their original shapes upon exposure to an external stimulus such as heat, moisture, light or a magnetic field. This book reviews key recent research in shape memory polymers, their properties and applications. Topics include the relationship between morphological structures and shape memory properties; high performance Tg and Tm type shape memory polymers; structures of shape memory polymers with supramolecular switches; and the thermally-active and moisture-active shape memory effect of supermolecular shape memory polymers.Advances in shape memory polymers is an essential reference for polymer and textile material students, scientists, designers, engineers and manufacturers. It is also an invaluable guide for professionals in the biomedical, electronics and engineering industries.

  • Getting Started with the MSP430 Launchpad

    • 1 Edición
    • Adrian Fernandez + 1 más
    • Inglés
    This book explores the world of microcontroller development through friendly lessons and progressively challenging projects, which will have you blink LEDs, make music with buzzers & interact with different sensors like accelerometers and temperature sensors. This book is focused on the MSP-EXP430G2 LaunchPad Evaluation Kit, which is a complete microcontroller development platform that includes everything you need to start creating microcontroller-base... projects. Many of the 25+ projects will also leverage external components, such as the highly-integrated Educational BoosterPack, which is a modular extension to the LaunchPad and includes many components such as an RGB LED, character LCD & potentiometer. This book provides helpful guides that break down hardware circuits through visual diagrams and includes fully-commented code examples. Concepts are broken down and explained in an easy to follow language and analogies to help you understand the principles behind each project/system. The projects will encourage you to use and even combine the fundamental concepts to develop your ideas in creating new microcontroller solutions. Coverage includes: Digital Input/Output: buttons, LEDs, turning anything into a button Analog Input/Output: sensors, temperature, accelerometer, potentiometer, etc. Programming fundamentals: conditional branches & loops, flow, logic, number systems Pulse-Width Modulation (PWM): square wave, buzzer, analog signal simulation Serial Communication: UART, SPI & I2C Code development using Energia, a free, open-source code editor and compiler Debugging through serial communication with a computer Interfacing with external components such as LEDs, buzzers, potentiometers, sensors & more. With the help of this book, you will be challenged to think about developing your own unique microcontroller-base... application, and you will be equipped to start solving various problems, adding intelligence to existing products, or even developing your own innovative creations with a LaunchPad development kit.

  • Handbook of Advanced Ceramics

    Materials, Applications, Processing, and Properties
    • 2 Edición
    • Shigeyuki Somiya
    • Inglés
    This new handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world and includes sections on Basic Science of Advanced Ceramics, Functional Ceramics (electro-ceramics and optoelectro-ceramics... and engineering ceramics.

  • Solution Manual for The Elements of Polymer Science and Engineering

    • 1 Edición
    • Alfred Rudin
    • Inglés

  • Experimental Chemotherapy V3

    • 1 Edición
    • R Schnitzer
    • Inglés

  • Powering Biomedical Devices

    • 1 Edición
    • Edwar Romero
    • Inglés
    From exoskeletons to neural implants, biomedical devices are no less than life-changing. Compact and constant power sources are necessary to keep these devices running efficiently. Edwar Romero's Powering Biomedical Devices reviews the background, current technologies, and possible future developments of these power sources, examining not only the types of biomedical power sources available (macro, mini, MEMS, and nano), but also what they power (such as prostheses, insulin pumps, and muscular and neural stimulators), and how they work (covering batteries, biofluids, kinetic and thermal energy, and telemetry). The book also looks at challenges such as energy generation efficiency, energy density, rectification, and energy storage and management. A final section on future trends rounds out the book. By briefly examining these key aspects, this book gives its readers a valuable overview of biomedical devices' power sources.

  • Safety Design for Space Operations

    • 1 Edición
    • Firooz Allahdadi + 3 más
    • Inglés
    Endorsed by the International Association for the Advancement of Space Safety (IAASS) and drawing on the expertise of the world’s leading experts in the field, Safety Design for Space Operations provides the practical how-to guidance and knowledge base needed to facilitate effective launch-site and operations safety in line with current regulations. With information on space operations safety design currently disparate and difficult to find in one place, this unique reference brings together essential material on: Best design practices relating to space operations, such as the design of spaceport facilities. Advanced analysis methods, such as those used to calculate launch and re-entry debris fall-out risk. Implementation of safe operation procedures, such as on-orbit space traffic management. Safety considerations relating to the general public and the environment in addition to personnel and asset protection. Taking in launch operations safety relating unmanned missions, such as the launch of probes and commercial satellites, as well as manned missions, Safety Design for Space Operations provides a comprehensive reference for engineers and technical managers within aerospace and high technology companies, space agencies, spaceport operators, satellite operators and consulting firms.

  • Diamond-Based Materials for Biomedical Applications

    • 1 Edición
    • Roger Narayan
    • Inglés
    Carbon is light-weight, strong, conductive and able to mimic natural materials within the body, making it ideal for many uses within biomedicine. Consequently a great deal of research and funding is being put into this interesting material with a view to increasing the variety of medical applications for which it is suitable. Diamond-based materials for biomedical applications presents readers with the fundamental principles and novel applications of this versatile material.Part one provides a clear introduction to diamond based materials for medical applications. Functionalization of diamond particles and surfaces is discussed, followed by biotribology and biological behaviour of nanocrystalline diamond coatings, and blood compatibility of diamond-like carbon coatings. Part two then goes on to review biomedical applications of diamond based materials, beginning with nanostructured diamond coatings for orthopaedic applications. Topics explored include ultrananocrystalline diamond for neural and ophthalmological applications, nanodiamonds for drug delivery systems, and diamond nucleation and seeding techniques for tissue regeneration. Finally, the book concludes with a discussion of diamond materials for microfluidic devices.With its distinguished editors and international team of expert contributors, Diamond-based materials for biomedical applications is an authoritative guide for all materials scientists, researchers, medical practitioners and academics investigating the properties and uses of diamond based materials in the biomedical environment.

  • Advances in Computers

    • 1 Edición
    • Volumen 89
    • Inglés
    Since its first volume in 1960, Advances in Computers has presented detailed coverage of innovations in computer hardware, software, theory, design, and applications. It has also provided contributors with a medium in which they can explore their subjects in greater depth and breadth than journal articles usually allow. As a result, many articles have become standard references that continue to be of sugnificant, lasting value in this rapidly expanding field.

  • Earthquake-Resistant Structures

    Design, Build, and Retrofit
    • 1 Edición
    • Mohiuddin Ali Khan
    • Inglés
    Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 176
    • Inglés
    Advances in Imaging and Electron Physics features cutting-edge articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • The Designer's Guide to the Cortex-M Processor Family

    A Tutorial Approach
    • 1 Edición
    • Trevor Martin
    • Inglés
    The Designer’s Guide to the Cortex-M Family is a tutorial-based book giving the key concepts required to develop programs in C with a Cortex M- based processor. The book begins with an overview of the Cortex- M family, giving architectural descriptions supported with practical examples, enabling the engineer to easily develop basic C programs to run on the Cortex- M0/M0+/M3 and M4. It then examines the more advanced features of the Cortex architecture such as memory protection, operating modes and dual stack operation. Once a firm grounding in the Cortex M processor has been established the book introduces the use of a small footprint RTOS and the CMSIS DSP library. With this book you will learn: The key differences between the Cortex M0/M0+/M3 and M4 How to write C programs to run on Cortex-M based processors How to make best use of the Coresight debug system How to do RTOS development The Cortex-M operating modes and memory protection Advanced software techniques that can be used on Cortex-M microcontrollers How to optimise DSP code for the cortex M4 and how to build real time DSP systems

  • Model-Based Engineering for Complex Electronic Systems

    • 1 Edición
    • Peter Wilson + 1 más
    • Inglés
    In the electronics industry today consumer demand for devices with hyper-connectivity and mobility has resulted in the development of a complete system on a chip (SoC). Using the old ‘rule of thumb’ design methods of the past is no longer feasible for these new complex electronic systems. To develop highly successful systems that meet the requirements and quality expectations of customers, engineers now need to use a rigorous, model-based approach in their designs. This book provides the definitive guide to the techniques, methods and technologies for electronic systems engineers, embedded systems engineers, and hardware and software engineers to carry out model- based electronic system design, as well as for students of IC systems design. Based on the authors’ considerable industrial experience, the book shows how to implement the methods in the context of integrated circuit design flows.

  • Plasma Engineering

    Applications from Aerospace to Bio and Nanotechnology
    • 1 Edición
    • Michael Keidar + 1 más
    • Inglés
    Plasma Engineering is the first textbook that addresses plasma engineering in the aerospace, nanotechnology, and bioengineering fields from a unified standpoint. It covers the fundamentals of plasma physics at a level suitable for an upper level undergraduate or graduate student, and applies the unique properties of plasmas (ionized gases) to improve processes and performance over a wide variety of areas such as materials processing, spacecraft propulsion, and nanofabrication. The book starts by reviewing plasma particle collisions, waves, and instabilities, and proceeds to diagnostic tools, such as planar, spherical, and emissive probes, and the electrostatic analyzer, interferometric technique, and plasma spectroscopy. The physics of different types of electrical discharges are considered, including the classical Townsend mechanism of gas electrical breakdown and the Paschen law. Basic approaches and theoretical methodologies for plasma modeling are described, based on the fluid description of plasma solving numerically magnetohydrodynamic (MHD) equations and the kinetic model particle techniques that take into account kinetic interactions among particles and electromagnetic fields. Readers are then introduced to the widest variety of applications in any text on the market, including space propulsion applications and application of low-temperature plasmas in nanoscience and nanotechnology. The latest original results on cold atmospheric plasma (CAP) applications in medicine are presented. The book includes a large number of worked examples, end of chapter exercises, and historical perspectives. There is also an accompanying plasma simulation software covering the Particle in Cell (PIC) approach, available at http://www.particlei... This book is appropriate for grad level courses in Plasma Engineering/Plasma Physics in departments of Aerospace Engineering, Electrical Engineering, and Physics. It will also be useful as an introduction to plasma engineering and its applications for early career researchers and practicing engineers.

  • Compressibility, Turbulence and High Speed Flow

    • 2 Edición
    • Thomas B. Gatski + 1 más
    • Inglés
    Compressibility, Turbulence and High Speed Flow introduces the reader to the field of compressible turbulence and compressible turbulent flows across a broad speed range, through a unique complimentary treatment of both the theoretical foundations and the measurement and analysis tools currently used. The book provides the reader with the necessary background and current trends in the theoretical and experimental aspects of compressible turbulent flows and compressible turbulence. Detailed derivations of the pertinent equations describing the motion of such turbulent flows is provided and an extensive discussion of the various approaches used in predicting both free shear and wall bounded flows is presented. Experimental measurement techniques common to the compressible flow regime are introduced with particular emphasis on the unique challenges presented by high speed flows. Both experimental and numerical simulation work is supplied throughout to provide the reader with an overall perspective of current trends.

  • Multi-criteria Decision Analysis for Supporting the Selection of Engineering Materials in Product Design

    • 1 Edición
    • Ali Jahan + 1 más
    • Inglés
    This book describes the growing field of multi-criteria decision making (MCDM) as applied to materials selection in product design. Useful in academic and research contexts, as well as to practitioners in materials engineering and design, it aids readers in producing successful designs by improving the decision-making process in materials selection. It is a constant challenge for designers, even when educated in the fundamentals of materials and mechanical engineering, to select the best materials to satisfy complex design problems. Current approaches to materials selection range from the use of intuition and experience to computer-based methods including electronic databases and search engines. Increasingly, MCDM methods are proving effective in materials selection for complex design problems. These methods supplement existing quantitative methods, such as selection charts, by allowing simultaneous consideration of design attributes, component configurations and types of material.

  • Real World Multicore Embedded Systems

    • 1 Edición
    • Bryon Moyer
    • Inglés
    This Expert Guide gives you the techniques and technologies in embedded multicore to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when building and managing multicore embedded systems. Following an embedded system design path from start to finish, our team of experts takes you from architecture, through hardware implementation to software programming and debug. With this book you will learn: • What motivates multicore • The architectural options and tradeoffs; when to use what • How to deal with the unique hardware challenges that multicore presents • How to manage the software infrastructure in a multicore environment • How to write effective multicore programs • How to port legacy code into a multicore system and partition legacy software • How to optimize both the system and software • The particular challenges of debugging multicore hardware and software

  • MSP430-based Robot Applications

    A Guide to Developing Embedded Systems
    • 1 Edición
    • Dan Harres
    • Inglés
    This book provides a careful explanation of the basic areas of electronics and computer architecture, along with lots of examples, to demonstrate the interface, sensor design, programming and microcontroller peripheral setup necessary for embedded systems development. With no need for mechanical knowledge of robots, the book starts by demonstrating how to modify a simple radio-controlled car to create a basic robot. The fundamental electronics of the MSP430 are described, along with programming details in both C and assembly language, and full explanations of ports, timing, and data acquisition. Further chapters cover inexpensive ways to perform circuit simulation and prototyping. Key features include: Thorough treatment of the MSP430’s architecture and functionality along with detailed application-specific guidance Programming and the use of sensor technology to build an embedded system A learn-by-doing experience With this book you will learn: The basic theory for electronics design - Analog circuits - Digital logic - Computer arithmetic - Microcontroller programming How to design and build a working robot Assembly language and C programming How to develop your own high-performance embedded systems application using an on-going robotics application

  • Electric Motors and Drives

    Fundamentals, Types and Applications
    • 4 Edición
    • Austin Hughes + 1 más
    • Inglés
    Electric Motors and Drives is intended for non-specialist users of electric motors and drives, filling the gap between maths- and theory-based academic textbooks and the more prosaic 'handbooks', which provide useful detail but little opportunity for the development of real insight and understanding. The book explores all of the widely-used modern types of motor and drive, including conventional and brushless D.C., induction motors and servo drives, providing readers with the knowledge to select the right technology for a given job.The third edition includes additional diagrams and worked examples throughout. New topics include digital interfacing and control of drives, direct torque control of induction motors and current-fed operation in DC drives. The material on brushless servomotors has also been expanded.Austin Hughes' approach, using a minimum of maths, has established Electric Motors and Drives as a leading guide for electrical engineers and mechanical engineers, and the key to a complex subject for a wider readership, including technicians, managers and students.

  • Manufacturing Process Selection Handbook

    • 1 Edición
    • K. G. Swift + 1 más
    • Inglés
    Manufacturing Process Selection Handbook provides engineers and designers with process knowledge and the essential technological and cost data to guide the selection of manufacturing processes early in the product development cycle. Building on content from the authors’ earlier introductory Process Selection guide, this expanded handbook begins with the challenges and benefits of identifying manufacturing processes in the design phase and appropriate strategies for process selection. The bulk of the book is then dedicated to concise coverage of different manufacturing processes, providing a quick reference guide for easy comparison and informed decision making. For each process examined, the book considers key factors driving selection decisions, including: Basic process descriptions with simple diagrams to illustrate Notes on material suitability Notes on available process variations Economic considerations such as costs and production rates Typical applications and product examples Notes on design aspects and quality issues Providing a quick and effective reference for the informed selection of manufacturing processes with suitable characteristics and capabilities, Manufacturing Process Selection Handbook is intended to quickly develop or refresh your experience of selecting optimal processes and costing design alternatives in the context of concurrent engineering. It is an ideal reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking design modules and projects as part of broader engineering programs.

  • Geothermal Reservoir Engineering

    • 1 Edición
    • Malcomm Grant
    • Inglés
    Geothermal Reservoir Engineering offers a comprehensive account of geothermal reservoir engineering and a guide to the state-of-the-art technology, with emphasis on practicality. Topics covered include well completion and warm-up, flow testing, and field monitoring and management. A case study of a geothermal well in New Zealand is also presented. Comprised of 10 chapters, this book opens with an overview of geothermal reservoirs and the development of geothermal reservoir engineering as a discipline. The following chapters focus on conceptual models of geothermal fields; simple models that illustrate some of the processes taking place in geothermal reservoirs under exploitation; measurements in a well from spudding-in up to first discharge; and flow measurement. The next chapter provides a case history of one well in the Broadlands Geothermal Field in New Zealand, with particular reference to its drilling, measurement, discharge, and data analysis/interpretat... The changes that have occurred in exploited geothermal fields are also reviewed. The final chapter considers three major problems of geothermal reservoir engineering: rapid entry of external cooler water, or return of reinjected water, in fractured reservoirs; the effects of exploitation on natural discharges; and subsidence. This monograph serves as both a text for students and a manual for working professionals in the field of geothermal reservoir engineering. It will also be of interest to engineers and scientists of other disciplines.

  • Product Performance Evaluation using CAD/CAE

    The Computer Aided Engineering Design Series
    • 1 Edición
    • Kuang-Hua Chang
    • Inglés
    This is one book of a four-part series, which aims to integrate discussion of modern engineering design principles, advanced design tools, and industrial design practices throughout the design process. Through this series, the reader will: Understand basic design principles and modern engineering design paradigms. Understand CAD/CAE/CAM tools available for various design related tasks. Understand how to put an integrated system together to conduct product design using the paradigms and tools. Understand industrial practices in employing virtual engineering design and tools for product development.

  • Guide to Essential Math

    A Review for Physics, Chemistry and Engineering Students
    • 2 Edición
    • Sy M. Blinder
    • Inglés
    This book reminds students in junior, senior and graduate level courses in physics, chemistry and engineering of the math they may have forgotten (or learned imperfectly) that is needed to succeed in science courses. The focus is on math actually used in physics, chemistry, and engineering, and the approach to mathematics begins with 12 examples of increasing complexity, designed to hone the student's ability to think in mathematical terms and to apply quantitative methods to scientific problems. Detailed illustrations and links to reference material online help further comprehension. The second edition features new problems and illustrations and features expanded chapters on matrix algebra and differential equations.

  • Metaheuristic Applications in Structures and Infrastructures

    • 1 Edición
    • Xin-She Yang + 2 más
    • Inglés
    Due to an ever-decreasing supply in raw materials and stringent constraints on conventional energy sources, demand for lightweight, efficient and low-cost structures has become crucially important in modern engineering design. This requires engineers to search for optimal and robust design options to address design problems that are commonly large in scale and highly nonlinear, making finding solutions challenging. In the past two decades, metaheuristic algorithms have shown promising power, efficiency and versatility in solving these difficult optimization problems. This book examines the latest developments of metaheuristics and their applications in structural engineering, construction engineering and earthquake engineering, offering practical case studies as examples to demonstrate real-world applications. Topics cover a range of areas within engineering, including big bang-big crunch approach, genetic algorithms, genetic programming, harmony search, swarm intelligence and some other metaheuristic methods. Case studies include structural identification, vibration analysis and control, topology optimization, transport infrastructure design, design of reinforced concrete, performance-based design of structures and smart pavement management. With its wide range of everyday problems and solutions, Metaheursitic Applications in Structures and Infrastructures can serve as a supplementary text for design courses and computation in engineering as well as a reference for researchers and engineers in metaheuristics, optimization in civil engineering and computational intelligence.

  • Mathematical Modeling

    • 4 Edición
    • Mark Meerschaert
    • Inglés
    The new edition of Mathematical Modeling, the survey text of choice for mathematical modeling courses, adds ample instructor support and online delivery for solutions manuals and software ancillaries. From genetic engineering to hurricane prediction, mathematical models guide much of the decision making in our society. If the assumptions and methods underlying the modeling are flawed, the outcome can be disastrously poor. With mathematical modeling growing rapidly in so many scientific and technical disciplines, Mathematical Modeling, Fourth Edition provides a rigorous treatment of the subject. The book explores a range of approaches including optimization models, dynamic models and probability models.

  • MIMO Wireless Networks

    Channels, Techniques and Standards for Multi-Antenna, Multi-User and Multi-Cell Systems
    • 2 Edición
    • Bruno Clerckx + 1 más
    • Inglés
    This book is unique in presenting channels, techniques and standards for the next generation of MIMO wireless networks. Through a unified framework, it emphasizes how propagation mechanisms impact the system performance under realistic power constraints. Combining a solid mathematical analysis with a physical and intuitive approach to space-time signal processing, the book progressively derives innovative designs for space-time coding and precoding as well as multi-user and multi-cell techniques, taking into consideration that MIMO channels are often far from ideal.Reflecting developments since the first edition was published, this book has been thoroughly revised, and now includes new sections and five new chapters, respectively dealing with receiver design, multi-user MIMO, multi-cell MIMO, MIMO implementation in standards, and MIMO system-level evaluation.

  • Digital Signal Processing

    Fundamentals and Applications
    • 2 Edición
    • Li Tan + 1 más
    • Inglés
    Digital Signal Processing, Second Edition enables electrical engineers and technicians in the fields of biomedical, computer, and electronics engineering to master the essential fundamentals of DSP principles and practice. Many instructive worked examples are used to illustrate the material, and the use of mathematics is minimized for easier grasp of concepts. As such, this title is also useful to undergraduates in electrical engineering, and as a reference for science students and practicing engineers. The book goes beyond DSP theory, to show implementation of algorithms in hardware and software. Additional topics covered include adaptive filtering with noise reduction and echo cancellations, speech compression, signal sampling, digital filter realizations, filter design, multimedia applications, over-sampling, etc. More advanced topics are also covered, such as adaptive filters, speech compression such as PCM, u-law, ADPCM, and multi-rate DSP and over-sampling ADC. New to this edition: MATLAB projects dealing with practical applications added throughout the book New chapter (chapter 13) covering sub-band coding and wavelet transforms, methods that have become popular in the DSP field New applications included in many chapters, including applications of DFT to seismic signals, electrocardiography data, and vibration signals All real-time C programs revised for the TMS320C6713 DSK

Temas relacionados