Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Computer Integrated Construction

    • 1 Edición
    • H. Wagter
    • Inglés
    The contributions in this volume portray, in terms of the current state of the art, research on computer-aided construction in the building industry. A complete overview is given within the areas of computer-aided design, product modelling in construction, and robot-oriented design and construction together with a summary of the commercial developments in computerized systems within those areas. The papers will be essential reading for all those interested in future automation in relation to the building construction industry with the accent on design and engineering.

  • Solar Materials Science

    • 1 Edición
    • Lawrence Murr
    • Inglés
    Solar Materials Science is a collection of lecture series on solar and other related energy technologies, sponsored by the New Mexico Joint Center for Materials Science. This book is divided into three sections encompassing 21 chapters that discuss the basic concepts of materials science, their utilization in solar technology, and examples of this utilization and the technology. The introductory chapters present an overview of the solar materials science and technology. Section I describes the optical properties, microstructure, and materials used in solar collectors and mirrors. This section also examines metals emissivity, spectral selectivity of composite for absorbers, and corrosion of solar thermal energy materials. Section II deals with the application of thermodynamic principles and reversible chemical reactions to solar storage systems. This section also considers the materials problems encountered during the development of thermochemical concepts and schemes. Section III focuses on the principles, materials used, and encountered problems in the development of photovoltaic systems. The optimization of solar conversion devices is also covered in this section. Undergraduate and graduate students in metallurgy, metallurgical and materials engineering, materials science, electrical and mechanical engineering, engineering science, and solid-state physics and chemistry will greatly benefit from this book.

  • Introduction to Electronics

    • 1 Edición
    • Theodore Korneff
    • Inglés
    Introduction to Electronics focuses on the study of electronics and electronic devices. Composed of 14 chapters, the book starts with discussions on dc circuits, including resistance, voltmeter, ammeter, galvanometer, internal resistance, and positive and negative currents. This topic is followed by discussions on ac circuits, particularly addressing voltage and current, average power, resistive load, complex plane, and parallel circuits. Discussions also focus on filters and tuned circuits, diodes, and power supplies. Particularly given attention are the processes, diagrams, and analyses that are involved in the operations of filters and capacitors. The functions of triodes, pentodes, oscillators, transistors, and voltage and power amplifiers are also discussed. The discussions are supported by diagrams, numerical analyses and representations, and experiments. Inter-electrode capacitance, phase splitters, impedance matching, equivalent circuits, and four terminal networks are covered as well. This text also mentions the role of an oscilloscope in maintaining regulated power supply. The calculations for direct and alternating currents are also given emphasis. This book is a good source of data for those interested in electronics.

  • Structural Ceramics

    • 1 Edición
    • John Jr. Wachtman
    • Inglés
    Treatise on Materials Science and Technology, Volume 29: Structural Ceramics presents an overview of structural ceramics. This book begins with a survey of potential uses, designs, and barriers of particular types of structural ceramics. The silicon carbide family, silicon nitride and sialon family, and transformation toughened ceramics are discussed in detail, followed by an analysis of the various processing routes of each family of structural ceramics. This publication concludes with a review of the tribology of structural ceramics, considering many applications for structural ceramics in heat engines and other machinery that involve moving parts which must often resist wear or erosion. This volume is recommended for engineers, scientists, and researchers concerned with structural ceramics.

  • Control and Dynamic Systems V21

    Advances in Theory and Applications
    • 1 Edición
    • C.T. Leonides
    • Inglés
    Control and Dynamic Systems: Advances in Theory and Applications, Volume 21: Nonlinear and Kalman Filtering Techniques, Part 3 of 3 presents the developments in the techniques and technology of the application of nonlinear and Kalman filters. This book provides substantive examples of the methods and technology of the application of Kalman and nonlinear filters. Organized into six chapters, this volume begins with an overview of the unique and relevant treatment of postflight data analysis. This text then examines the control and filter problems for the interception of torpedo-ship situations. Other chapters consider the MLS algorithm, which has been shown to be a superior algorithm in terms of stability and tracking performance when compared to existing least squares batch algorithm that use both a transition matrix and a measurement. The final chapter deals with the significant trends in integrated communication and navigation systems. This book is a valuable resource for mechanical and aerospace engineers.

  • Principles of Electron Optics

    Applied Geometrical Optics
    • 1 Edición
    • Peter W. Hawkes + 1 más
    • Inglés
    This is a complete handbook and reference volume which covers everything that one needs to know about electron optics. It is a comprehensive coverage of theoretical background and modern computing methods. It contains a detailed and unique account of numerical methods and an extensive bibliography.

  • Transport Models/Inland & Coastal Waters

    Proceedings of a Symposium on Predictive Ability
    • 1 Edición
    • Hugo B. Fischer
    • Inglés
    Professors and Students in Civil Engineering.

  • Shakedown of Elastic-Plastic Structures

    • 1 Edición
    • J.A. König
    • Inglés
    In this book, the author has collected existing information on the analysis of elastic-plastic structures subjected to variable repeated loads and to variable temperature fields. He presents the foundations of the theory and its applications to the shakedown analysis of structures of various types and to computational algorithms.The book provides useful and interesting material for students of civil and mechanical engineering, practising engineers with a good mathematical background and also scientists concerned with the analysis of inelastic structures.

  • Evaluation of diagnostic systems

    • 1 Edición
    • John Swets
    • Inglés
    Evaluation of Diagnostic Systems: Methods from Signal Detection Theory addresses the many issues that arise in evaluating the performance of a diagnostic system, across the wide range of settings in which such systems are used. These settings include clinical medicine, industrial quality control, environmental monitoring and investigation, machine and metals inspection, military monitoring, information retrieval, and crime investigation. The book is divided into three parts encompassing 11 chapters that emphasize the interpretation of diagnostic visual images by human observers. The first part of the book describes quantitative methods for measuring the accuracy of a system and the statistical techniques for drawing inferences from performance tests. The subsequent part covers study design and includes a detailed description of the form and conduct of an image-interpretation test. The concluding part examines the case study of a medical imaging system that serves as an example of both simple and complex applications. In this part, three mammographic modalities are used: industrial film radiography, low-dose film radiography, and xeroradiography. The case study focuses on the overall reliability of accuracy indices made by its main components, that is, the variabilities across cases, across readers, and within individual readers. The supplementary texts provide study protocols, a computer program for processing test results, and an extensive list of references that will assist the reader in applying those evaluative methods to diagnostic systems in any setting. This book is of value to scientists and engineers, as well as to applied, quantitative, or experimental psychologists who are engaged in the study of the human processes of discrimination and decision making in either perceptual or cognitive tasks.

  • Physical Acoustics V14

    Principles and Methods
    • 1 Edición
    • Warren P. Mason
    • Inglés
    Physical Acoustics: Principles and Methods, Volume XIV is a five-chapter text that covers significant studies on acoustic microscopy, sound propagation in liquid crystals, ultrasonic transducers, and ultrasonic flowmeters. The opening chapter discusses techniques of acoustic microscopy, aberration and resolution performance, acoustic lens transfer functions, antireflection coatings, and both transmission and reflection acoustic microscopy. The following chapter deals with the applications to the states called liquid crystals or anisotropic liquids, states in which the material flows but yet has a long-range order that makes it macroscopically anisotropic. The third chapter focuses on the principles and practical applications of electromagnetic transducers for both surface waves and bulk waves. The fourth chapter surveys first the characterization of ultrasonic transducers for materials testing and then compares actual responses to those of an ""ideal"" transducer, elaborating on the many important factors that affect the results obtained with an ultrasonic testing system. The final chapter explains the principles underlying ultrasonic measurements of flow, specifically covering eight different categories of ultrasonic flow measurement principles and their industrial applications indicated. This book will be of great value to researchers in their fields of electronics technology and applied and engineering mechanics.

  • Internal Combustion Engines

    • 1 Edición
    • Constantine Arcoumanis
    • Inglés
    Internal Combustion Engines covers the trends in passenger car engine design and technology. This book is organized into seven chapters that focus on the importance of the in-cylinder fluid mechanics as the controlling parameter of combustion. After briefly dealing with a historical overview of the various phases of automotive industry, the book goes on discussing the underlying principles of operation of the gasoline, diesel, and turbocharged engines; the consequences in terms of performance, economy, and pollutant emission; and of the means available for further development and improvement. A chapter focuses on the automotive fuels of the various types of engines. Recent developments in both the experimental and computational fronts and the application of available research methods on engine design, as well as the trends in engine technology, are presented in the concluding chapters. This book is an ideal compact reference for automotive researchers and engineers and graduate engineering students.

  • Duplex Systems

    Hot-dip Galvanizing Plus Painting
    • 1 Edición
    • J.F.H. van Eijnsbergen
    • Inglés
    This book is unique in several aspects.• It is the first comprehensive text ever written on the subject of duplex systems, which is the generic term for painted hot-dip galvanized steel.• Both the traditional batch hot-dip galvanizing process and the modern sheet galvanizing processes are covered.• The author offers a combination of practical information, which will enable the engineer to select the proper materials, and scientific background information.• The practical guidelines are backed up and supported by an impressive amount of technical and scientific discussions and justifications.• Modern surface analysis tools and recent applications are described.• The world literature on the subject matter is covered and is up to date.Duplex systems, which are based on the synergistic effect of galvanizing and painting, offer maximum protection against corrosion of steel surfaces in environments where galvanized steel alone cannot offer a sufficiently long resistance against rust formation. Since adhesion problems can be eliminated by the correct application of special paint products, and by sophisticated surface pretreatment and modern surface analyzing methods, duplex systems are nowadays used in a large number of industrial and domestic applications. Major savings can thus be achieved on materials and maintenance cost. Duplex systems serve also where colour is required, e.g. for aesthetic reasons, for enhancing visibility or for camouflaging.The author of this book has an unsurpassed experience in this field and the many case histories of successful (and unsuccessful) use of duplex systems for corrosion prevention provide a wealth of practical information. Including 108 colour illustrations, the book will be useful to a large group of industries, such as the paint, metallurgical, galvanizing, building, automotive, electrical and chemical industries.

  • Control and Dynamic Systems V19

    Advances in Theory and Applications
    • 1 Edición
    • C.T. Leonides
    • Inglés
    Volume 19: Nonlinear and Kalman Filtering Techniques, Part 1 of 3 covers the advances in the techniques and technology of nonlinear filters and Kalman filters. The book provides a comprehensive treatment of the theory and applications of nonlinear filters and Kalman filters. Chapters are devoted to the discussion of the exact and approximate state estimation techniques for nonlinear dynamic systems; computational efficiencies in the various approaches to filtering techniques; the implementation of filters by the use of microprocessors and distributed processor systems; and practical means for dealing with nonlinearities. Engineers, economists, seismologists, meteorologists, and communications experts will find this book a good reference material.

  • Mathematical Theory of Compressible Fluid Flow

    • 1 Edición
    • Richard Von Mises
    • Inglés
    Mathematical Theory of Compressible Fluid Flow covers the conceptual and mathematical aspects of theory of compressible fluid flow. This five-chapter book specifically tackles the role of thermodynamics in the mechanics of compressible fluids. This text begins with a discussion on the general theory of characteristics of compressible fluid with its application. This topic is followed by a presentation of equations delineating the role of thermodynamics in compressible fluid mechanics. The discussion then shifts to the theory of shocks as asymptotic phenomena, which is set within the context of rational mechanics. The remaining two chapters is a thorough description of the hodograph method. These chapters provide a comparison of the modern integration theories. The features, characteristics, and application of transonic flow are also explored. This book is an ideal advanced textbook for both graduate students and research workers.

  • Thermophysics: Applications to Thermal Design of Spacecraft

    • 1 Edición
    • Jerry Bevans
    • Inglés
    Thermophysics: Applications to Thermal Design of Spacecraft is a collection of technical papers presented at the American Institute of Aeronautics and Astronautics's 7th Aerospace Sciences Meeting, held on January 20-22, 1969, in New York and 4th Thermophysics Conference, held on June 16-18, 1969, in San Francisco, California. Contributors explore the applications of thermophysics to thermal design of spacecraft and tackle topics ranging from conduction and radiation to convection, phase change, and thermal design techniques. Comprised of 26 chapters, this volume begins with a discussion on experimental thermophysical properties, focusing on topics such as contact thermal resistance theory and experiment; optics and engineering in thermophysics; and crystal growth during melting and freezing and its application to phase change in thermal control. The physical parameters affecting radiation property degradation under simulated space environmental conditions are also considered. Radiative analysis is treated in the next section, with emphasis on surface effects upon radiative properties; two-component heat pipes; parametric thermal control requirements for future manned spacecraft; and thermal considerations of a landed vehicle on the surface of Mars. This book should be of interest to practitioners in astronautics and aeronautics.

  • Reliability Fundamentals

    • 1 Edición
    • V.M. Catuneanu + 1 más
    • Inglés
    The development of modern technologies has enlarged the scope of quality, to include aspects concerning the time varying performances of systems. The general property of a system, to conserve its performance in time, is known as reliability. The concept of reliability, developed on the basis of electronic technology, can be generalized to describe any system, be it technical, biological or even social. This work is concerned with technological systems, but many of its ideas can be applied successfully outside the purely technical field. A comprehensive treatment of the various models and methodologies employed in the reliability field is given. The mathematical, physical and engineering concepts related to reliability are presented from a unitary point of view. Moreover, the book provides the theoretical background for the methodologies of reliability assurance and assessment. A global model of system reliability is specified by classical estimation of its parameters from experimental data. The practical difficulties related to the amount of data needed for an accurate estimation is examined in detail.A major improvement on the accuracy of a model is provided by the application of Bayesian statistical theory, thereby making use of all the information available on the reliability of the system. The next section describes the relationship between reliability and stress. It introduces the models of reliability extrapolation and the theory of accelerated life tests. The global model is extended to systems that are subject to renewal and leads to specific reliability indices of system effectiveness. A comparison is given on structural models of system reliability together with the appropriate methods of analysis. The limitations and the areas of application of different models are clearly outlined.The book maintains a good balance between the theoretical and the practical point of view. It is sufficiently theoretical to cover most technical systems, but is not restricted to purely mathematical aspects. The interpretations and the applications of the models are presented in detail, enabling the practitioner to make direct use of many results.

  • Design Automation

    Automated Full-Custom VLSI Layout Using the ULYSSES Design Environment
    • 1 Edición
    • Michael Bushnell
    • Inglés
    Design Automation: Automated Full-Custom VLSI Layout Using the ULYSSES Design Environment deals with the use of the Ulysses design environment for an automated full-custom VLSI layout. Topics covered include VLSI chip design and design process, control mechanisms in Ulysses, and the use of artificial intelligence (AI) in design environments. An example design task is also presented. This book is comprised of 10 chapters and begins with an overview of VLSI computer-aided design (CAD), focusing on an expert system based design environment aimed at solving the CAD tool integration problem. An example CAD tool suite for such an environment is presented. The next chapter describes prior attempts at developing an integrated design environment, followed by a discussion on the computer-aided VLSI design process that motivated the development of the Ulysses design environment. The following chapters explore the use of AI techniques within Ulysses; the fundamental architecture of Ulysses; and the control mechanisms that govern the decision to execute various CAD tools, on particular files, within Ulysses. The implementation of Ulysses is also discussed. The final chapter demonstrates the feasibility of a knowledge-based design environment for VLSI chip design applications; the success of Ulysses at further automating the VLSI design process; and the usability of Ulysses as a VLSI design environment. This monograph will be a valuable resource for systems designers and other practitioners in computer science and computer engineering.

  • Optical Fiber Telecommunications

    • 1 Edición
    • Stewart Miller
    • Inglés
    Optical Fiber Telecommunications is organized so that it is understandable to a reader on the graduate level with no specialized knowledge of lightwave communication and yet provides a comprehensive treatment. The first two chapters give historical background, outline the detailed chapter organization, and lead the reader through the evolution of the new transmission medium. This book comprises 21 chapters, and begins with the evolution of optical communications. Succeeding chapters then discuss objectives of early fibers; guiding properties of fibers; dispersion properties of fibers; and nonlinear properties of optical fibers. Other chapters cover fiber design considerations; fiber preform preparation; fiber drawing and control; coatings and jackets; fiber characterization; optical cable design; fiber splicing; optical fiber connectors; and optical sources. This book will be of interest to students, scientists, and engineers in academic, industrial, and other institutions.

  • Explosion Hazards and Evaluation

    • 1 Edición
    • W.E. Baker + 4 más
    • Inglés
    Explosion Hazards and Evaluation presents the principles and applications of explosion hazards evaluation. The text is organized into nine chapters. Chapters 1 and 2 discuss the energy release processes which generate accidental explosions, and the resulting development of pressure and shock waves in a surrounding atmosphere. The manner in which the "free-field" waves are modified in interacting with structures or other objects in their paths is discussed in Chapter 3. Structural response to blast loading and non-penetrating impact is covered in two chapters, with Chapter 4 including simplified analysis methods and Chapter 5 including numerical methods. Chapter 6 includes a rather comprehensive treatment of generation of fragments and missiles in explosions, and the flight and effects of impact of these objects. Chapter 7 considers thermal radiation of large chemical explosions. Explosions may or may not cause damage or casualty, and various damage criteria have been developed for structures, vehicles, and people. These criteria are presented in Chapter 8. General procedures for both the postmortem evaluation of accidental explosions and for design for blast and impact resistance are reviewed in Chapter 9. Engineers, scientists, and plant safety personnel will find the book very useful.

  • High Temperature Oxides

    • 1 Edición
    • Allen Alper
    • Inglés
    High Temperature Oxides: Refractory Glasses, Glass-Ceramics, and Ceramics is the fourth part of a series of four books on high temperature oxides. This book is divided into nine chapters that cover refractory glasses and glass-ceramics, alumina-containing compounds, zinc oxide, tungsten oxide compounds, and slip-casting of ceramics. The first chapters of the book deal with the fabrication, characterization, and application of refractory glasses and glass-ceramics. These topics are followed by considerable chapters on the preparation, properties, and application of mullite, oxide spinels, oxides containing tungsten, and zinc oxide. A chapter on slip-cast ceramics and refractories approaches slip-casting from a scientific point of view of this complex process. Included also in this text are the advances in sintered and fusion-cast glass-contact refractories, such as zirconium oxide-silica-alumina... The concluding chapter deals with the quantitative calculations of the magnitudes of the physical properties of glasses and the variation of these properties with temperature. This book is of great value to ceramic and glass researchers and scientists.

  • Advances In Structural Analysis V4B

    • 1 Edición
    • D Uhlmann
    • Inglés
    Glass Science and Technology, Volume 4B: Advances in Structural Analysis presents the principal methods used to obtain experimental data on glass structure. This book discusses the development of models and data that provide improved and more detailed descriptions of structural features on various scales of structure. Organized into six chapters, this volume begins with an overview of how defects and short-range order in glasses have been considerably elucidated by the techniques of electronic spin resonance, nuclear magnetic resonance, and small-angle scattering of X-rays. This text then examines how unconventional methods from the perspective of inorganic glasses can provide valuable structural information. Other chapters consider the study of the structure of glasses at various levels of resolution. This book discusses as well the electron microscopic investigation of glasses. The final chapter deals with the anionic constitution of phosphate glasses. This book is a valuable resource for scientists, experimentalists, and research workers.

  • Advanced MOS Device Physics

    • 1 Edición
    • Norman Einspruch
    • Inglés
    VLSI Electronics Microstructure Science, Volume 18: Advanced MOS Device Physics explores several device physics topics related to metal oxide semiconductor (MOS) technology. The emphasis is on physical description, modeling, and technological implications rather than on the formal aspects of device theory. Special attention is paid to the reliability physics of small-geometry MOSFETs. Comprised of eight chapters, this volume begins with a general picture of MOS technology development from the device and processing points of view. The critical issue of hot-carrier effects is discussed, along with the device engineering aspects of this problem; the emerging low-temperature MOS technology; and the problem of latchup in scaled MOS circuits. Several device models that are suitable for use in circuit simulators are also described. The last chapter examines novel electron transport effects observed in ultra-small MOS structures. This book should prove useful to semiconductor engineers involved in different aspects of MOS technology development, as well as for researchers in this field and students of the corresponding disciplines.

  • An Introduction to Digital Signal Processing

    • 1 Edición
    • John H. Karl
    • Inglés
    An Introduction to Digital Signal Processing is written for those who need to understand and use digital signal processing and yet do not wish to wade through a multi-semester course sequence. Using only calculus-level mathematics, this book progresses rapidly through the fundamentals to advanced topics such as iterative least squares design of IIR filters, inverse filters, power spectral estimation, and multidimensional applications--all in one concise volume. This book emphasizes both the fundamental principles and their modern computer implementation. It presents and demonstrates how simple the actual computer code is for advanced modern algorithms used in DSP. Results of these programs, which the reader can readily duplicate and use on a PC, are presented in many actual computer drawn plots.

  • VLSI Handbook

    • 1 Edición
    • Norman Einspruch
    • Inglés
    VLSI Handbook is a reference guide on very large scale integration (VLSI) microelectronics and its aspects such as circuits, fabrication, and systems applications. This handbook readily answers specific questions and presents a systematic compilation of information regarding the VLSI technology. There are a total of 52 chapters in this book and are grouped according to the fields of design, materials and processes, and examples of specific system applications. Some of the chapters under fields of design are design automation for integrated circuits and computer tools for integrated circuit design. For the materials and processes, there are many chapters that discuss this aspect. Some of them are manufacturing process technology for metal-oxide semiconductor (MOS) VLSI; MOS VLSI circuit technology; and facilities for VLSI circuit fabrication. Other concepts and materials discussed in the book are the use of silicon material in different processes of VLSI, nitrides, silicides, metallization, and plasma. This handbook is very useful to students of engineering and physics. Also, researchers (in physics and chemistry of materials and processes), device designers, and system designers can also benefit from this book.

  • Physical Acoustics V18

    Principles and Methods
    • 1 Edición
    • Warren P. Mason
    • Inglés
    Physical Acoustics: Principles and Methods reviews the principles and methods of physical acoustics, with emphasis on applications of the thermal and acoustic response to light. Measurements in which a beam of light (or electrons) excites a system are presented, and information is obtained from the resulting thermal or acoustic waves. Comprised of seven chapters, this volume begins with a description of the use of number theory to design phase gratings and arrays with low directivity, followed by a comprehensive account of ultrasonic generation by pulsed lasers in gases, vapors, liquids, and solids. Thermoelastic generation at a free surface is considered, along with the effect of material ablation and the effect of surface modification by a thin liquid coating or constraining solid layer. Subsequent chapters focus on electron-acoustic imaging of solids; the theory of photothermal and photoacoustic effects in condensed matter; the use of photoacoustics to study the vibrational relaxation of molecules; and analytical applications of photoacoustic spectroscopy to condensed phase substances. The final chapter describes imaging with optically generated thermal waves. This book will be of interest to physicists.

  • Knowledge-Based Process Planning for Construction and Manufacturing

    • 1 Edición
    • Carlos Zozaya-Gorostiza
    • Inglés
    Knowledge-Based Process Planning for Construction and Manufacturing describes a knowledge-based system architecture that is used to develop process planning systems called PLANEX. This book explains that PLANEX is a domain-independent, knowledge-based process planning system architecture. Starting from a description of the physical artifact to be constructed or manufactured, PLANEX generates the set of activities used to create the artifact. These activities, with their required resources, are linked into a process planning network which can be used in project scheduling or management. This text also reviews the concepts, requirements, and resulting architecture of PLANEX, including detailed descriptions of applications of the system in construction and manufacturing. This publication is recommended to engineers, architects, and specialists interested in construction and manufacturing process planning.

  • Stochastic Wave Propagation

    • 1 Edición
    • K. Sobczyk
    • Inglés
    This is a concise, unified exposition of the existing methods of analysis of linear stochastic waves with particular reference to the most recent results. Both scalar and vector waves are considered. Principal attention is concentrated on wave propagation in stochastic media and wave scattering at stochastic surfaces. However, discussion extends also to various mathematical aspects of stochastic wave equations and problems of modelling stochastic media.

  • Modern Materials

    Advances in Development and Applications
    • 1 Edición
    • Bruce W. Gonser
    • Inglés
    Modern Materials: Advances in Development and Applications, Volume 4 provides a comprehensive coverage of the developments, technical information, and utilization of new and improved materials. This volume covers the presentation of the properties and applications of materials required in moving parts. Chapters are devoted to the discussion of graphite, solid lubricants, plain bearings, high-strength, extra high-strength, and ultrahigh-strength steels, and the effects of radiation on materials. Materials engineers and engineers concerned with the building and design of mechanical equipments will find this book a valuable reference material.

  • Tunneling in Rock

    • 1 Edición
    • Volumen 3
    • Ernest Wahlstrom
    • Inglés
    Tunneling in Rock reviews the theory and practice of engineering geology and its application to tunneling in rocks. This book explores the history of tunneling, defines terminologies of tunneling, and illustrates tunnels. The book discusses the petrography of unaltered rocks, such as rock minerals, fragmental rocks, igneous rocks, sedimentary rocks and metamorphic rocks. The book then describes rock alteration, which may be caused by weathering. Such alterations are low-temperature alterations at moderate depths, hydrothermal alteration, deuteric alteration, pneumatolytic alteration, and other miscellaneous types of alteration. The book also discusses elementary rock mechanics, such as isotropism and anisotropism; mechanical properties of rocks; force and stress; and the fracture and fold anisotropy in rocks, including the deformation of minerals, elastic, quasi-elastic, and plastic rocks. The remaining chapters of the book focus on hydrogeology; geological investigation of proposed tunnel locations and its application to tunnel planning and design; different tunneling methods; and geological investigations during tunnel constructions. Those who are interested in geological aspects of planning and constructing tunnels will find this book valuable.

  • Gasdynamic Lasers: An Introduction

    • 1 Edición
    • John D. Jr. Anderson
    • Inglés
    Gasdynamic Lasers: An Introduction is a 12-chapter introductory text to major development generations of gasdynamic lasers, focusing on their underlying physical and fundamental aspects. The opening chapters discuss the basic detailed physical phenomena that ultimately are responsible for producing gasdynamic laser action and the methods of calculating the performance of these devices. These topics are followed by a chapter on confirmation of the performance calculations through arc and shock tunnel experiments. The discussion then shifts to vibrational relaxation process behind normal shock waves in CO2-N2-He mixtures and assesses their population inversions occurring in the nonequilibrium flow. Other chapters explore the concepts of downstream mixing and optical cavity in gasdynamic lasers, as well as the laser beam extracted from these devices. A systematic study of aerodynamic windows that use supersonic flow across the aperture is presented in the concluding chapters, along with the phenomena associated with gasdynamic laser diffusers. This introductory text will be of great value to professional scientists and engineers, as well as to students and workers in the field who are interested in interdisciplinary applied science.

  • Theory of Flexible Shells

    • 1 Edición
    • Volumen 28
    • E.L. Axelrad
    • Inglés
    Engineers and researchers concerned with the problems of thin-walled structures have a choice of books on shell theory. However, the almost exclusive concern of these books are shells designed for maximum strength and stiffness. Shells which are designed for maximum elastic displacements (flexible shells) have been used in industry for decades, but are largely ignored in shell-theory books due to tradition and to the wide variety of shapes and problems involved.This book presents the general theory of elastic shells and the deformation inherent in flexibility. For the analysis of stability of the two-dimensionally variable large elastic deformations, a local approach is developed.The specialized theory is then applied to the basic problems of flexible shells - tubes, open-section beams and shells of revolution. The results of parametric studies are presented in numerous graphs.

  • Non-Destructive Testing '92

    • 1 Edición
    • C. Hallai + 1 más
    • Inglés
    A broad spectrum of technical papers on the most diverse nondestructive testing techniques (NDT) and correlated fields are presented in this volume. The main applications and methods of these important quality control techniques are reviewed in depth. Apart from reporting on the improvements and developments of new techniques and the rapid automatization of nondestructive testings, many papers address the environment from the point of view of inspection surveys. The 265 contributions demonstrate that nondestructive testing techniques (NDT) play a vital role, not only in the quality assurance and control of manufactured products, but also as instruments of public, environmental and industrial safety. The quality of the articles in this book attest to the contribution this conference has made in the technical interchange of experience between NDT professionals, and indicate the present accelerated rate of development of ideas and knowledge in this field.

  • Energy Conservation Through Control

    • 1 Edición
    • Francis Shinskey
    • Inglés
    Energy Conservation Through Control provides information pertinent to energy-conserving control systems, which is relevant to efficient plant operations. This book discusses the processes involving energy conversion and examines the laws of thermodynamics. Organized into four parts encompassing nine chapters, this book starts with an overview of the first law of thermodynamics, which emphasizes that energy is naturally conserved in any isolated system. This text then explores the various aspects of combustion, which includes air pollution control, controlling airflow, and controlling fuel flow. Other chapters describe the common refrigeration systems and examine the factors affecting their performance. This book discusses as well the importance of refrigeration systems in industrial processing and to air-condition buildings. The final chapter deals with the general features and control problems in energy conservation in heating, ventilating, and air-conditioning (HVAC) system. Plant designers, control engineers, power plant operators, and industrial managers will find this book extremely useful.

  • Spectral Techniques and Fault Detection

    • 1 Edición
    • Marg Karpovsky
    • Inglés
    Spectral Techniques and Fault Detection focuses on the spectral techniques for the analysis, testing, and design of digital devices. This book discusses the error detection and correction in digital devices. Organized into 10 chapters, this book starts with an overview of the concepts and tools to evaluate the applicability of various spectral approaches and fault-detection techniques to the design. This text then describes the class of generalized Programmable Logic Array configurations called Encoded PLAs. Other chapters consider the two-sided Chrestenson Transform to the analysis of some pattern properties. This book describes as well a certain type of cellular arrays for highly parallel processing, namely, three-dimensional arrays. The final chapter deals with the system design methods that allow and encourage designers to incorporate the necessary distributed error correction throughout any digital system. This book is a valuable resource for graduate students and engineers working in the fields of logic design, spectral techniques, testing, and self-testing of digital devices.

  • Water Renovation and Reuse

    • 1 Edición
    • Hillel Shuval
    • Inglés
    Water Renovation and Reuse focuses on the general principles and technological developments of water reuse and renovation. This book provides documented case studies of reuse practices and experiences throughout the world. Organized into two parts encompassing 15 chapters, this book starts with an overview of the different aspects of the problem to conserve, reuse, and recycle the limited water resources. This text proceeds to discuss the initial phase of water renovation and reuse, which is based on the conservationists' concept that society's wastes should be utilized and conserved to preserve the fertility of the soil. Other chapters explore the second phase of water renovation and reuse, which is motivated by the need to conserve and reuse water in arid areas. This book discusses as well the policy of zero pollution in the United States, which led to programs of land disposal. This book is intended for biologists, engineers, chemists, agronomists, public health officers, and water resources authorities.

  • Laser and Electron Beam Processing of Materials

    • 1 Edición
    • C.W. White
    • Inglés
    Laser and Electron Beam Processing of Materials contains the papers presented at the symposium on "Laser and Electron Beam Processing of Materials," held in Cambridge, Massachusetts, in November 1979, sponsored by the Materials Research Society. The compilation presents reports and research papers on the use of directed energy sources, such as lasers and electron beams for materials processing. The majority of the materials presented emphasize results on semiconductor materials research. Substantial findings on research on metals, alloys, and other materials are presented as well. Topics covered by the papers include the use of scanned cw sources (both photons and electrons) to recrystallize amorphous layers, enhanced substitutional solubility, solute trapping, zone refining of impurities, and constitutional supercooling. The use of lasers and electron beams to anneal ion implant damage and contacts formation, processing of ion-implanted metals, and surface alloying of films deposited on metallic surfaces are also discussed. Metallurgists, engineers, and materials scientists will find the book very insightful.

  • Power System Control and Protection

    • 1 Edición
    • B. Don Russell
    • Inglés
    Power System Control and Protection focuses on the control and protection of power systems to ensure a secure and reliable supply as the society depends greatly on electric energy. This book examines the problems surrounding the generation, transmission, distribution, and utilization of electricity. Comprised of 10 chapters, this book starts with an overview of the functional and environmental requirements for the intelligent remote terminal in which much of the logic linked with each function has been programmed and is executed in a digital processor. This text then examines the objectives, functions, and elements of the control center design. Other chapters consider the operating characteristics and configuration of the system components of an audio-frequency power line carrier load management system. This book discusses as well the concept of transmission line relaying by digital computer. The final chapter deals with the large-scale utilization of wind energy. Power systems engineers will find this book useful.

  • Designing with Speech Processing Chips

    • 1 Edición
    • Ricardo Jimenez
    • Inglés
    Designing with Speech Processing Chips focuses on the role that speech processing chips play in data processing, control systems, and inventory display. The book highlights the use of these chips in electronic circuit design. Divided into seven chapters, the book identifies different kinds of chips, including Serial Speech ROM SPR128A; SPR000 Parallel-to-Serial Speech Interface Chip; and Samsung Voice Synthesizers. Experiments on several speech processors are conducted. Electronic diagrams are also presented to show how these chips function. The text puts emphasis on analog and digital circuits. Concerns include the use of a window comparator or a 10-step voltage comparator to drive a speech processor; how to design alternating current motor-speed controller with artificial voice; and how to create a talking coffee machine controller. The book goes further by discussing the design of burglar alarms and voice recognition chips. The text is a vital source of data for system engineers, engineering students, technicians, and readers interested in the study of speech processing chips.

  • Machine Vision for Inspection and Measurement

    • 1 Edición
    • Herbert Freeman
    • Inglés
    Machine Vision for Inspection and Measurement contains the proceedings of the Second Annual Workshop on Machine Vision sponsored by the Center for Computer Aids for Industrial Productivity (CAIP) at Rutgers University and held on April 25-26, 1988 in New Brunswick, New Jersey. The papers explore the application of machine vision to inspection and measurement and cover topics such as the problem of object-pose estimation and depth recovery through inverse optics. The use of machine vision techniques in inspection of integrated circuits and semiconductor wafers is also discussed. Comprised of 11 chapters, this book opens with the problem of using fine-grained parallel machines for VLSI inspection. The discussion then turns to a variety of real-life applications of machine vision, including inspection of integrated circuits, semiconductor wafers, TV-tube glass, and mechanical parts. The use of machine vision to measure the curvature of the human cornea for vision correction and contact lens fitting purposes is also considered. The remaining chapters focus on motion estimation from stereo sequences using orthographic-view algorithms; photometric sampling for determining surface shape and reflectance; and efficient depth recovery by means of inverse optics. A chapter addresses the question of whether the industry is ready for machine vision and comes up with some optimistic predictions. This monograph will be of interest to practitioners in the fields of computer science and applied mathematics.

  • Thermal Analysis V2

    Inorganic Materials and Physical Chemistry
    • 1 Edición
    • Robert F. Jr. Schwenker
    • Inglés
    Thermal Analysis, Volume 2: Inorganic Materials and Physical Chemistry covers the proceedings of the Second International Conference on Thermal Analysis, held in Holy Cross College, Worcester, Massachusetts on August 18-23, 1968. This symposium surveys the various methods and applications of thermal analysis, as well as the distribution of various aspects of thermal analysis in different countries. This book is organized into four sections encompassing 51 chapters, and begins with discussion on the application of differential thermal analysis to metallurgical inorganic materials and reactions for industrial process optimization. These topics are followed by a consideration of other techniques, such as X-ray methods and thermography. The Physical Chemistry part highlights the reaction kinetics and thermodynamics of various chemical reactions, including oxidation and polymerization, using thermogravimetry and calorimetry techniques. The following part focuses on mineral analysis using combined techniques of thermoanalytic-mass spectrometry and differential thermal analysis-thermogravi... The last part deals with the application of thermal analysis in applied sciences.

  • Planning for Groundwater Protection

    • 1 Edición
    • G. William Page
    • Inglés
    Planning for Groundwater Protection focuses on toxic substances contamination problems of groundwater in the United States and other industrially developed countries. This book discusses the potential health risks of toxic substances caused by contamination of groundwater. Organized into 14 chapters, this book starts with an overview of the method in which pollutants enter the groundwater system and the natural defense mechanisms operative in the subsurface. This text then proceeds with a discussion of the groundwater monitoring activities that are necessary for groundwater planning and protection, which includes protecting groundwater from pollution and protecting groundwater supplies from overdraft. Other chapters consider the laws and institutions that are established to protect groundwater from contamination, including the Safe Drinking Water Act, the Resource Conservation and Recovery Act (RCRA), and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) laws implemented by the Environmental Protection Agency. This book is a valuable resource for sanitarians, environmentalists, chemical engineers, and urban planners.

  • World Coal Resources

    Method of Assessment and Result
    • 1 Edición
    • Gunter Fettweis
    • Inglés
    World Coal Resources: Methods of Assessment and Results is an English translation of the German book Weltkohlenvorràte. This book presents detailed coal resources estimates for the world, and it illustrates and assesses the methods that are used to calculate them. The book discusses the viewpoints for the techno-economic assessment and the classification of mineral occurrences in relation to coal. It also presents the total resources of coal in the world that are significant to the economics, and it offers ideas for the improvement of terminologies in mineral occurrences for better decision making. Furthermore, this book presents the position of coal among the raw material of minerals. It also explores conventional mining and alternative technologies. Finally, this book deals with coal resources and its classification. This book will be of great value to specialists, as well as the general public interested in problems of energy supplies.

  • Applied Optics and Optical Engineering V8

    • 1 Edición
    • Robert Shannon
    • Inglés
    Applied Optics and Optical Engineering, Volume VIII covers topics on photographic lenses; lens mounting and centering; and aspheric surfaces. The book also presents automated lens design; radiometry; and the calculation of image quality. Topics on circuits for detectors of visible radiation, as well as arrays and charge-coupled devices are also encompassed. Practicing optical engineers will find the book invaluable.

  • Solar Energy Application in Buildings

    • 1 Edición
    • A. A. M. Sayigh
    • Inglés
    Solar Energy Application in Buildings discusses the successful utilization of the Sun’s energy in various cultures, continents, and climates. This book consists of 19 chapters and begins with considerable chapters devoted to the fundamentals of solar energy, including climate, storage, and material properties. The subsequent chapters discuss the concept of passive heating and cooling in buildings. The remaining nine chapters deal with various applications of solar energy in buildings in the United States, Iran, Canada, Germany, Japan, New Zealand, Great Britain, India, and France. This work will be of great value to scientists and engineers who are interested in the great potential of solar energy.

  • High-Velocity Impact Phenomena

    • 1 Edición
    • Ray Kinslow
    • Inglés
    High-Velocity Impact Phenomena covers a wide range of pertinent topics dealing with impact phenomena. The book discusses hypervelocity accelerators; stress wave propagation in solids; and the theory of impact. The text also describes the application of the theory of impact on thin targets and shields and correlation with experiment; the numerical evaluation of hypervelocity impact phenomena; and analytical studies of impact-generated shock propagation. The equation of state of solids from shock wave studies; metallurgical observations and energy partitioning; and engineering considerations in hypervelocity impact are also encompassed. Design engineers will find the book invaluable.

  • Rheology V3

    Theory and Applications
    • 1 Edición
    • Frederick Eirich
    • Inglés
    Rheology: Theory and Applications, Volume 3 is a collection of articles contributed by experts in the field of rheology - the science of deformation and flow. This volume is composed of specialized chapters on the application of normal coordinate analysis to the theory of high polymers; principles of rheometry; and the rheology of cross-linked plastics, poly electrolytes, latexes, inks, pastes, and clay. Also included are a series of technological articles on lubrication, spinning, molding, extrusion, and adhesion and a survey of the general features of industrial rheology. Materials scientists, geophysicists, and engineers will find the book very insightful.

  • Analytical Heat Diffusion Theory

    • 1 Edición
    • A Luikov
    • Inglés
    Analytical Heat Diffusion Theory is a revised edition of an earlier book by Academician Luikov, which was widely used throughout the Soviet Union and the surrounding socialist countries. This book is divided into 15 chapters that treat heat conduction problems by the classical methods and emphasize the advantages of the transform method, particularly in obtaining short time solutions of many transient problems. This book starts with a discussion on the physical fundamentals, generalized variables, and solution of boundary value problems of heat transfer. Considerable chapters are devoted to the basic classical heat transfer problems and problems in which the body surface temperature is a specified function of time. Other chapters explore the heat transfer problems under different heat sources, including continuous and pulse-type. The discussion then shifts to the problem of freezing wet ground, two-dimensional temperature field, and heat conduction with variable transfer coefficients. The final chapters deal with the fundamentals of the integral transforms and their application to heat conduction problems. These chapters also look into the application of the theory of analytic functions to the heat conduction theory of mathematical physics. This book is an invaluable source for advanced undergraduate or graduate in analytical heat transfer.

  • Control and Dynamic Systems V49: Manufacturing and Automation Systems: Techniques and Technologies

    Advances in Theory and Applications
    • 1 Edición
    • C.T. Leonides
    • Inglés
    Control and Dynamic Systems: Advances in Theory and Applications, Volume 49: Manufacturing and Automation Systems: Techniques and Technologies, Part 5 of 5 discusses advances in techniques and technologies in manufacturing and automation systems. This volume first provides insights on some limitations in machine functions such as computational processes. It then describes fundamental techniques in manufacturing and automation systems such as neural network techniques; techniques used in the agricultural industry; modeling and simulation; knowledge-based simulation environment techniques; detection of faults; computer-assisted tomography and finite element modeling; and sensor integration. This book will provide a uniquely significant reference for practising engineers looking for a comprehensive treatment of techniques and technologies in manufacturing and automation system.

  • Modern Approaches to Plasticity

    • 1 Edición
    • D. Kolymbas
    • Inglés
    Constitutive modelling of granulate materials has achieved significant progress in recent times although some challenging problems still remain to be solved. Many of the 35 contributions in this volume are devoted to modelling but there are also papers investigating the phenomena to be modelled. For instance, there are reviews on several aspects of the behaviour of granulates which are mere material properties while other aspects are related to the ill-posedness of the corresponding boundary value problems. The work provides a comprehensive and up to date treatise on the theory of plasticity in granular materials, together with a great number of solution methods and applications. The volume is intended for researchers and practising engineers who wish to enhance their knowledge in this rapidly expanding field.

  • Machine Vision for Three-Dimensional Scenes

    • 1 Edición
    • Herbert Freeman
    • Inglés
    Machine Vision for Three-Dimensional Scenes contains the proceedings of the workshop "Machine Vision - Acquiring and Interpreting the 3D Scene" sponsored by the Center for Computer Aids for Industrial Productivity (CAIP) at Rutgers University and held in April 1989 in New Brunswick, New Jersey. The papers explore the applications of machine vision in image acquisition and 3D scene interpretation and cover topics such as segmentation of multi-sensor images; the placement of sensors to minimize occlusion; and the use of light striping to obtain range data. Comprised of 14 chapters, this book opens with a discussion on 3D object recognition and the problems that arise when dealing with large object databases, along with solutions to these problems. The reader is then introduced to the free-form surface matching problem and object recognition by constrained search. The following chapters address the problem of machine vision inspection, paying particular attention to the use of eye tracking to train a vision system; images of 3D scenes and the attendant problems of image understanding; the problem of object motion; and real-time range mapping. The final chapter assesses the relationship between the developing machine vision technology and the marketplace. This monograph will be of interest to practitioners in the fields of computer science and applied mathematics.

Temas relacionados