Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Nanomedicine

    Technologies and Applications
    • 1 Edición
    • Inglés
    Nanotechnology is at the forefront of advances in medicine. Nanomedicine: Technologies and applications provides an important review of this exciting technology and its growing range of applications.After an introduction to nanomedicine, part one discusses key materials and their properties, including nanocrystalline metals and alloys, nanoporous gold and hydroxyapatite coatings. Part two goes on to review nanomedicine for therapeutics and imaging, before nanomedicine for soft tissue engineering is discussed in part three, including organ regeneration, skin grafts, nanotubes and self-assembled nanomaterials. Finally, nanomedicine for bone and cartilage tissue engineering is the focus of part four, with electrically active biocomposites as smart scaffolds investigated, as is cartilage and bone tissue engineering, regeneration and replacement.With its distinguished editor and international team of expert contributors, Nanomedicine: Technologies and applications is an indispensable guide for all those involved in the research, development and application of this exciting technology, whilst providing a comprehensive introduction for students and academics interested in this field.

  • Writing for Science and Engineering

    Papers, Presentations and Reports
    • 2 Edición
    • Heather Silyn-Roberts
    • Inglés
    Learning how to write clearly and concisely is an integral part of furthering your research career; however, doing so is not always easy. In this second edition, fully updated and revised, Dr. Silyn-Roberts explains in plain English the steps to writing abstracts, theses, journal papers, funding bids, literature reviews, and more. The book also examines preparing seminar and conference presentations. Written in a practical and easy to follow style specifically for postgraduate students in Engineering and Sciences, this book is essential in learning how to create powerful documents. Writing for Science and Engineering will prove invaluable in all areas of research and writing due its clear, concise style. The practical advice contained within the pages alongside numerous examples to aid learning will make the preparation of documentation much easier for all students.

  • Pressure Vessels Field Manual

    Common Operating Problems and Practical Solutions
    • 1 Edición
    • Maurice Stewart + 1 más
    • Inglés
    The majority of the cost-savings for any oil production facility is the prevention of failure in the production equipment such as pressure vessels. Money lost through lost production far outweighs expenses associated with maintenance and proper operation. However, many new engineers lack the necessary skills to effectively find and troubleshoot operating problems while experienced engineers lack knowledge of the latest codes and standards. The fifth book in the Field Manual Series, the Pressure Vessel Operations Field Manual provides new and experienced engineers with the latest tools to alter, repair and re-rate pressure vessels using ASME, NBIC and API 510 codes and standards.

  • Nonlinear Fiber Optics

    • 5 Edición
    • Govind P. Agrawal
    • Inglés
    Since the 4e appeared, a fast evolution of the field has occurred. The 5e of this classic work provides an up-to-date account of the nonlinear phenomena occurring inside optical fibers, the basis of all our telecommunications infastructure as well as being used in the medical field.Reflecting the big developments in research, this new edition includes major new content: slow light effects, which offers a reduction in noise and power consumption and more ordered network traffic-stimulated Brillouin scattering; vectorial treatment of highly nonlinear fibers; and a brand new chapter on supercontinuum generation in optical fibers.

  • Leveraging Information Technology for Optimal Aircraft Maintenance, Repair and Overhaul (MRO)

    • 1 Edición
    • Anant Sahay
    • Inglés
    Aircraft maintenance, repair and overhaul (MRO) requires unique information technology to meet the challenges set by today’s aviation industry. How do IT services relate to aircraft MRO, and how may IT be leveraged in the future?Leveraging Information Technology for Optimal Aircraft Maintenance, Repair and Overhaul (MRO) responds to these questions, and describes the background of current trends in the industry, where airlines are tending to retain aircraft longer on the one hand, and rapidly introducing new genres of aircraft such as the A380 and B787, on the other. This book provides industry professionals and students of aviation MRO with the necessary principles, approaches and tools to respond effectively and efficiently to the constant development of new technologies, both in general and within the aviation MRO profession. This book is designed as a primer on IT services for aircraft engineering professionals and a handbook for IT professionals servicing this niche industry, highlighting the unique information requirements for aviation MRO and delving into detailed aspects of information needs from within the industry.

  • Flight Dynamics Principles

    A Linear Systems Approach to Aircraft Stability and Control
    • 3 Edición
    • Michael V. Cook
    • Inglés
    The study of flight dynamics requires a thorough understanding of the theory of the stability and control of aircraft, an appreciation of flight control systems and a grounding in the theory of automatic control. Flight Dynamics Principles is a student focused text and provides easy access to all three topics in an integrated modern systems context. Written for those coming to the subject for the first time, the book provides a secure foundation from which to move on to more advanced topics such as, non-linear flight dynamics, flight simulation, handling qualities and advanced flight control.

  • EPC and 4G Packet Networks

    Driving the Mobile Broadband Revolution
    • 2 Edición
    • Magnus Olsson + 1 más
    • Inglés
    Get a comprehensive and detailed insight into the Evolved Packet Core (EPC) with this clear, concise and authoritative guide – a fully updated second edition that covers the latest standards and industry developments. The latest additions to the Evolved Packet System (EPS) including e.g. Positioning, User Data Management, eMBMS, SRVCC, VoLTE, CSFB. A detailed description of the nuts and bolts of EPC that are required to really get services up and running on a variety of operator networks. An in-depth overview of the EPC architecture and its connections to the wide variety of network accesses, including LTE, LTE-Advanced, WCDMA/HSPA, GSM, WiFi, etc. The most common operator scenarios of EPS and the common issues faced in their design. The reasoning behind many of the design decisions taken in EPC, in order to understand the full details and background of the all-IP core NEW CONTENT TO THIS EDITION • 150+ New pages, new illustrations and call flows• Covers 3GPP Release 9, 10 and 11 in addition to release 8• Expanded coverage on Diameter protocol, interface and messages• Architecture overview • Positioning • User Data Management• eMBMS (LTE Broadcasting)• H(e)NodeB/Femto Cells • LIPA/SIPTO/Breakout architectures• Deployment Scenarios • WiFi interworking • VoLTE/MMTel, CS fallback and SRVCC

  • Boundary Layer Flow over Elastic Surfaces

    Compliant Surfaces and Combined Methods for Marine Vessel Drag Reduction
    • 1 Edición
    • Viktor V. Babenko + 2 más
    • Inglés
    While other methods of drag reduction are well-known in marine R&D and ship design environments worldwide, compliant coating drag reduction remains less well-known and poorly understood. This important book presents cutting-edge techniques and findings from research sources not generally accessible by Western researchers and engineers, aiding the application and further development of this potentially important technology. Beginning with an introduction to drag reduction that places the authors’ work on elastic surfaces and combined techniques in context, the book moves on to provide a comprehensive study of drag reduction through elastic coating with both flow and material properties considered. Coverage includes: Experimental findings around coherent vortical structures (CVS) in turbulent boundary layers and methods of controlling them Static and dynamic mechanical characteristics of elastic composite coatings, as well as new techniques and devices developed for their measurement Combined methods of flow control and drag reduction, including the effect of injection of polymer solutions, elastic coatings and generated longitudinal vortical structures on hydrodynamic resistance Intended as a reference for senior engineers and researchers concerned with the drag reduction and the dynamics of turbulent boundary layer flows, Boundary Layer Flow over Elastic Surfaces provides a unique source of information on compliant surface drag reduction and the experimental techniques around it that have shown measurable and repeatable improvements over recent years. This compilation of research findings and new techniques developed for measurement will aid R&D engineers, naval architects and senior designers in their quest to achieve drag reductions that will deliver significant efficiency savings.

  • Computational Fluid Dynamics

    A Practical Approach
    • 2 Edición
    • Jiyuan Tu + 2 más
    • Inglés
    Computational Fluid Dynamics, Second Edition, provides an introduction to CFD fundamentals that focuses on the use of commercial CFD software to solve engineering problems. This new edition provides expanded coverage of CFD techniques including discretisation via finite element and spectral element as well as finite difference and finite volume methods and multigrid method. There is additional coverage of high-pressure fluid dynamics and meshless approach to provide a broader overview of the application areas where CFD can be used. The book combines an appropriate level of mathematical background, worked examples, computer screen shots, and step-by-step processes, walking students through modeling and computing as well as interpretation of CFD results. It is ideal for senior level undergraduate and graduate students of mechanical, aerospace, civil, chemical, environmental and marine engineering. It can also help beginner users of commercial CFD software tools (including CFX and FLUENT).

  • Microstructure Sensitive Design for Performance Optimization

    • 1 Edición
    • Brent L. Adams + 2 más
    • Inglés
    The accelerating rate at which new materials are appearing, and transforming the engineering world, only serves to emphasize the vast potential for novel material structure and related performance. Microstructure Sensitive Design for Performance Optimization (MSDPO) embodies a new methodology for systematic design of material microstructure to meet the requirements of design in optimal ways. Intended for materials engineers and researchers in industry, government and academia as well as upper level undergraduate and graduate students studying material science and engineering, MSDPO provides a novel mathematical framework that facilitates a rigorous consideration of the material microstructure as a continuous design variable in the field of engineering design.

  • The Effect of Sterilization on Plastics and Elastomers

    • 3 Edición
    • Laurence W. McKeen
    • Inglés
    This reference guide brings together a wide range of essential data on the sterilization of plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials, and right sterilization method for a given product or application. The third edition includes new text chapters that provide the underpinning knowledge required to make best use of the data. Larry McKeen has also added detailed descriptions of sterilization methods for most common polymer classes such as polyolefins, polyamides, polyesters, elastomers, fluoropolymers, biodegradable plastics. Data has been updated throughout, with expanded information on newer classes of polymer utilized in medical devices and sterile packaging, such as UHMWPE, high temperature plastics (PEEK, PES, PPS, etc.), PBT, PETG, etc. The resulting Handbook is an essential reference for Plastics Engineers, Materials Scientists and Chemists working in contexts where sterilization is required, such as food packaging, pharmaceutical packaging and medical devices.

  • Marine Propellers and Propulsion

    • 3 Edición
    • John Carlton
    • Inglés
    Propulsion technology is a complex, multidisciplinary topic with design, construction, operational and research implications. Bringing together a wealth of disparate information from the field, Marine Propellers and Propulsion provides comprehensive and cutting edge coverage to equip marine engineers, naval architects and anyone involved in propulsion and hydrodynamics with the knowledge needed to do the job. Drawing on experience from a long and varied career in consultancy, research, design and technical investigation, author John Carlton breaks the subject into three main sections - hydrodynamic theory, materials and mechanical considerations, and design, operation and performance. Connecting essential theory to practical problems in design, analysis and operational efficiency, Marine Propellers and Propulsion is an invaluable resource, packed with hard-won insights, detailed specifications and data.

  • Acoustics: Sound Fields and Transducers

    • 1 Edición
    • Tim Mellow
    • Inglés
    Acoustics: Sound Fields and Transducers is a thoroughly updated version of Leo Beranek's classic 1954 book that retains and expands on the original's detailed acoustical fundamentals while adding practical formulas and simulation methods. Serving both as a text for students in engineering departments and as a reference for practicing engineers, this book focuses on electroacoustics, analyzing the behavior of transducers with the aid of electro-mechano-acou... circuits. Assuming knowledge of electrical circuit theory, it starts by guiding readers through the basics of sound fields, the laws governing sound generation, radiation, and propagation, and general terminology. It then moves on to examine: Microphones (electrostatic and electromagnetic), electrodynamic loudspeakers, earphones, and horns Loudspeaker enclosures, baffles, and waveguides Miniature applications (e.g., MEMS in I-Pods and cellphones) Sound in enclosures of all sizes, such as school rooms, offices, auditoriums, and living rooms Numerical examples and summary charts are given throughout the text to make the material easily applicable to practical design. It is a valuable resource for experimenters, acoustical consultants, and to those who anticipate being engineering designers of audio equipment.

  • Digital Video Processing for Engineers

    A Foundation for Embedded Systems Design
    • 1 Edición
    • Suhel Dhanani + 1 más
    • Inglés
    Any device or system with imaging functionality requires a digital video processing solution as part of its embedded system design. Engineers need a practical guide to technology basics and design fundamentals that enables them to deliver the video component of complex projects. This book introduces core video processing concepts and standards, and delivers practical how-to guidance for engineers embarking on digital video processing designs using FPGAs. It covers the basic topics of video processing in a pictorial, intuitive manner with minimal use of mathematics. Key outcomes and benefits of this book for users include: understanding the concepts and challenges of modern video systems; architect video systems at a system level; reference design examples to implement your own high definition video processing chain; understand implementation trade-offs in video system designs.

  • 10th International Conference on Vibrations in Rotating Machinery

    11-13 September 2012, Imeche London, UK
    • 1 Edición
    • Institution of Mechanical Engineers
    • Inglés
    This book presents the papers from the 10th International Conference on Vibrations in Rotating Machinery. This conference, first held in 1976, has defined and redefined the state-of-the-art in the many aspects of vibration encountered in rotating machinery. Distinguished by an excellent mix of industrial and academic participation achieved, these papers present the latest methods of theoretical, experimental and computational rotordynamics, alongside the current issues of concern in the further development of rotating machines. Topics are aimed at propelling forward the standards of excellence in the design and operation of rotating machines.

  • Ship Stability for Masters and Mates

    • 7 Edición
    • Bryan Barrass + 1 más
    • Inglés
    Ship Stability for Masters and Mates explores all aspects of ship stability and ship strength, squat, and interaction and trim, as well as materials stresses and forces. Organized into 56 chapters, the book looks at the relationship between ship stability and ship motion, with emphasis on group weights in a ship. It also explains how TPCs are calculated for a range of drafts extending beyond the light and loaded drafts, along with form coefficients, including the coefficient of fineness of the waterplane area.The book explains how to perform KB, BM, and KM calculations and make graphics on metacentric diagrams. It considers large-angle stability, the effect of beam and freeboard on stability, and hydrostatic curves and values for vessels that are initially on even keel. The reader is also introduced to free-surface effects of slack tanks with divisional bulkheads, how side winds affect ship stability, and the correlation between freeboard and stability curves. Other chapters focus on timber ship freeboard marks, procedures and calculations for drydocking and stability, and ship squat in open water and in confined channels. The book also includes extracts from the 1998 Merchant Shipping (Load Line) Regulations Number MSN 1752(M).This book is intended for students seeking to obtain Transport Certificates of Competency for Deck Officers and Engineering Officers and STCW equivalent International qualifications, as well as Chief Mates and Officers on Watch (Officers in Charge) on board merchant ships and other maritime personnel, port authorities, marine consultants, nautical study lecturers, and marine superintendents.

  • Metaheuristics in Water, Geotechnical and Transport Engineering

    • 1 Edición
    • Xin-She Yang + 2 más
    • Inglés
    Due to an ever-decreasing supply in raw materials and stringent constraints on conventional energy sources, demand for lightweight, efficient and low cost structures has become crucially important in modern engineering design. This requires engineers to search for optimal and robust design options to address design problems that are often large in scale and highly nonlinear, making finding solutions challenging. In the past two decades, metaheuristic algorithms have shown promising power, efficiency and versatility in solving these difficult optimization problems. This book examines the latest developments of metaheuristics and their applications in water, geotechnical and transport engineering offering practical case studies as examples to demonstrate real world applications. Topics cover a range of areas within engineering, including reviews of optimization algorithms, artificial intelligence, cuckoo search, genetic programming, neural networks, multivariate adaptive regression, swarm intelligence, genetic algorithms, ant colony optimization, evolutionary multiobjective optimization with diverse applications in engineering such as behavior of materials, geotechnical design, flood control, water distribution and signal networks. This book can serve as a supplementary text for design courses and computation in engineering as well as a reference for researchers and engineers in metaheursitics, optimization in civil engineering and computational intelligence.

  • Observing the User Experience

    A Practitioner's Guide to User Research
    • 2 Edición
    • Elizabeth Goodman + 1 más
    • Inglés
    Observing the User Experience: A Practitioner’s Guide to User Research aims to bridge the gap between what digital companies think they know about their users and the actual user experience. Individuals engaged in digital product and service development often fail to conduct user research. The book presents concepts and techniques to provide an understanding of how people experience products and services. The techniques are drawn from the worlds of human-computer interaction, marketing, and social sciences. The book is organized into three parts. Part I discusses the benefits of end-user research and the ways it fits into the development of useful, desirable, and successful products. Part II presents techniques for understanding people’s needs, desires, and abilities. Part III explains the communication and application of research results. It suggests ways to sell companies and explains how user-centered design can make companies more efficient and profitable. This book is meant for people involved with their products’ user experience, including program managers, designers, marketing managers, information architects, programmers, consultants, and investors.

  • Fundamentals of Evaluation and Diagnostics of Welded Structures

    • 1 Edición
    • A Nedoseka
    • Inglés
    Fundamentals of Evaluation and Diagnostics of Welded Structures provides an essential guide to the key principles and problems involved in the analysis of welded structures. Chapter one discusses design issues, key equations and calculations, and the effects of varied heat sources in relation to the temperature field in welding. Chapter two goes on to explore welding stresses and strains. Fracture mechanics and the load-carrying capacity of welded structures are the focus of chapter three. Chapter four considers diagnostics and prediction of the residual life of welded structures, whilst acoustic emission techniques for the analysis of welded structures are reviewed in chapter five. Finally, chapter six supplies supplementary information on numerical techniques and other tests for welded structures.With its distinguished author and detailed coverage, Fundamentals of evaluation and diagnostics of welded structures is an indispensable guide for welding and structural engineers as well as those researching this important topic.

  • Computer Animation

    Algorithms and Techniques
    • 3 Edición
    • Rick Parent
    • Inglés
    Driven by demand from the entertainment industry for better and more realistic animation, technology continues to evolve and improve. The algorithms and techniques behind this technology are the foundation of this comprehensive book, which is written to teach you the fundamentals of animation programming. In this third edition, the most current techniques are covered along with the theory and high-level computation that have earned the book a reputation as the best technically-oriented animation resource. Key topics such as fluids, hair, and crowd animation have been expanded, and extensive new coverage of clothes and cloth has been added. New material on simulation provides a more diverse look at this important area and more example animations and chapter projects and exercises are included. Additionally, spline coverage has been expanded and new video compression and formats (e.g., iTunes) are covered.

  • Synchronous Precharge Logic

    • 1 Edición
    • Marek Smoszna
    • Inglés
    Precharge logic is used by a variety of industries in applications where processor speed is the primary goal, such as VLSI (very large systems integration) applications. Also called dynamic logic, this type of design uses a clock to synchronize instructions in circuits. This comprehensive book covers the challenges faced by designers when using this logic style, including logic basics, timing, noise considerations, alternative topologies and more. In addition advanced topics such as skew tolerant design are covered in some detail. Overall this is a comprehensive view of precharge logic, which should be useful to graduate students and designers in the field alike. It might also be considered as a supplemental title for courses covering VLSI.

  • Machinery Failure Analysis and Troubleshooting

    Practical Machinery Management for Process Plants
    • 4 Edición
    • Heinz P. Bloch + 1 más
    • Inglés
    Solve the machinery failure problems costing you time and money with this classic, comprehensive guide to analysis and troubleshooting Provides detailed, complete and accurate information on anticipating risk of component failure and avoiding equipment downtime Includes numerous photographs of failed parts to ensure you are familiar with the visual evidence you need to recognize Covers proven approaches to failure definition and offers failure identification and analysis methods that can be applied to virtually all problem situations Demonstrates with examples how the progress and results of failure analysis and troubleshooting efforts can be documented and monitored Failures of machinery in a plant setting can have wide-ranging consequences and in order to stay competitive, corporations across all industries must optimize the efficiency and reliability of their machinery. Machinery Failure Analysis and Troubleshooting is a trusted, established reference in the field, authored by two well-known authorities on failure and reliability. Structured to teach failure identification and analysis methods that can be applied to almost all problem situations, this eagerly awaited update takes in the wealth of technological advances and changes in approach seen since the last edition published more than a decade ago. Covering both the engineering detail and management theory, Machinery Failure Analysis and Troubleshooting provides a robust go-to reference and training resource for all engineers and managers working in manufacturing and process plants.

  • Digital Control Engineering

    Analysis and Design
    • 2 Edición
    • M. Sami Fadali + 1 más
    • Inglés
    Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer.

  • Toxicity of Building Materials

    • 1 Edición
    • Fernando Pacheco-Torgal + 2 más
    • Inglés
    From long-standing worries regarding the use of lead and asbestos to recent research into carcinogenic issues related to the use of plastics in construction, there is growing concern regarding the potential toxic effects of building materials on health. Toxicity of building materials provides an essential guide to this important problem and its solutions.Beginning with an overview of the material types and potential health hazards presented by building materials, the book goes on to consider key plastic materials. Materials responsible for formaldehyde and volatile organic compound emissions, as well as semi-volatile organic compounds, are then explored in depth, before a review of wood preservatives and mineral fibre-based building materials. Issues related to the use of radioactive materials and materials that release toxic fumes during burning are the focus of subsequent chapters, followed by discussion of the range of heavy metals, materials prone to mould growth, and antimicrobials. Finally, Toxicity of building materials concludes by considering the potential hazards posed by waste based/recycled building materials, and the toxicity of nanoparticles.With its distinguished editors and international team of expert contributors, Toxicity of building materials is an invaluable tool for all civil engineers, materials researchers, scientists and educators working in the field of building materials.

  • Spacecraft Thermal Control

    • 1 Edición
    • J Meseguer + 2 más
    • Inglés
    Thermal control systems are an essential element of spacecraft design, ensuring that all parts of the spacecraft remain within acceptable temperature ranges at all times. Spacecraft thermal control describes the fundamentals of thermal control design and reviews current thermal control technologies. The book begins with an overview of space missions and a description of the space environment, followed by coverage of the heat transfer processes relevant to the field. In the third part of the book, current thermal control technologies are described, and in the final part, design, analysis and testing techniques are reviewed.

  • Lees' Loss Prevention in the Process Industries

    Hazard Identification, Assessment and Control
    • 4 Edición
    • Frank Lees
    • Inglés
    Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees’ is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead.

  • Advances in Imaging and Electron Physics

    Part B
    • 1 Edición
    • Volumen 173
    • Inglés
    This special volume of Advances in Imaging and Electron Physics details the current theory, experiments, and applications of neutron and x-ray optics and microscopy for an international readership across varying backgrounds and disciplines. Edited by Dr. Ted Cremer, these volumes attempt to provide rapid assimilation of the presented topics that include neutron and x-ray scatter, refraction, diffraction, and reflection and their potential application.

  • Up and Running with AutoCAD 2013

    2D Drawing and Modeling
    • 2 Edición
    • Elliot J. Gindis
    • Inglés
    Up and Running with Autocad® 2013 started out as a set of classroom notes that outlined, in an easy to understand manner, exactly how AutoCAD is used and applied, in contrast to theoretical musings or clinical descriptions of the commands as found in other books. This book attempts to use experience and top-level knowledge to sort out what is important and what is secondary, and to explain the essentials in plain language. This volume comprises 20 chapters, beginning with the AutoCAD fundamentals. The following chapters then focus on layers, colors, linetypes, and properties; text, Mtext, editing, and style; and hatch patterns; dimensions; blocks, Wblocks, dynamic blocks, groups, and purge. Other chapters cover polar, rectangular, and path arrays; basic printing and output; advanced linework; options, shortcuts, CUI, design center, and express tools; advanced design and file management tools; advanced output and pen settings; and isometric drawing. Each chapter in the book ends with a summary and some review questions to aid the reader in retaining essential concepts. This book will be of interest to engineers, architects, and industrial designers.

  • Up and Running with AutoCAD 2013

    2D and 3D Drawing and Modeling
    • 3 Edición
    • Elliot J. Gindis
    • Inglés
    Up and Running with AutoCAD 2013 by Elliot Gindis is an easy-to-learn introduction to AutoCAD featuring step-by-step instructions that explain both the why and the how for using this industry standard software package. The book strips away complexities, both real and perceived, and reduces AutoCAD to easy-to-understand basic concepts. All concepts are explained first in theory, and then shown in practice, helping the reader understand what it is they are doing and why, before they do it. The book is divided into three parts, guiding students through the subject matter from the beginning stages of using the software through advanced AutoCAD, including 3D features. Chapters deal with topics such as: layers, colors, linetypes, and properties; text, Mtext, editing, and style; blocks, Wblocks, dynamic blocks, groups, and purge; importing and exporting data; Boolean operations; Dview, walk and fly, animation, and action recording; and lighting and rendering. Also included is an extensive Appendix for each part, detailing additional useful CAD-related information not often found in other text books. In addition, the book contains supporting graphics (screen shots); a summary with a self-test section at the end of each chapter; drawing examples and exercises; and two running "projects" that the student works on as he/she progresses through the chapters . This book will appeal to beginner through advanced users of AutoCAD; architectural engineers, drafting, civil/construction engineers, and mechanical engineers; and students taking drafting/engineering drawing courses in engineering and engineering technology programs.

  • Exploring Engineering

    An Introduction to Engineering and Design
    • 3 Edición
    • Robert Balmer + 1 más
    • Inglés
    Engineers solve problems, and work on emerging challenges in a wide range of areas important to improving quality of life; areas like sustainable energy, access to clean water, and improved communications and health care technologies. Kosky et. al. explore the world of engineering by introducing the reader to what engineers do, the fundamental principles that form the basis of their work, and how they apply that knowledge within a structured design process. The three part organization of the text reinforces these areas, making this an ideal introduction for anyone interested in exploring the various fields of engineering and learning how engineers work to solve problems.

  • Digital Design and Computer Architecture

    • 2 Edición
    • David Harris + 1 más
    • Inglés
    Digital Design and Computer Architecture, Second Edition, takes a unique and modern approach to digital design, introducing the reader to the fundamentals of digital logic and then showing step by step how to build a MIPS microprocessor in both Verilog and VHDL. This new edition combines an engaging and humorous writing style with an updated and hands-on approach to digital design. It presents new content on I/O systems in the context of general purpose processors found in a PC as well as microcontrollers found almost everywhere. Beginning with digital logic gates and progressing to the design of combinational and sequential circuits, the book uses these fundamental building blocks as the basis for the design of an actual MIPS processor. It provides practical examples of how to interface with peripherals using RS232, SPI, motor control, interrupts, wireless, and analog-to-digital conversion. SystemVerilog and VHDL are integrated throughout the text in examples illustrating the methods and techniques for CAD-based circuit design. There are also additional exercises and new examples of parallel and advanced architectures, practical I/O applications, embedded systems, and heterogeneous computing, plus a new appendix on C programming to strengthen the connection between programming and processor architecture. This new edition will appeal to professional computer engineers and to students taking a course that combines digital logic and computer architecture.

  • Advances in Computers

    • 1 Edición
    • Volumen 86
    • Inglés
    Since its first volume in 1960, Advances in Computers has presented detailed coverage of innovations in computer hardware, software, theory, design, and applications. It has also provided contributors with a medium in which they can explore their subjects in greater depth and breadth than journal articles usually allow. As a result, many articles have become standard references that continue to be of sugnificant, lasting value in this rapidly expanding field.

  • The Global Textile and Clothing Industry

    Technological Advances and Future Challenges
    • 1 Edición
    • Roshan Shishoo
    • Inglés
    Advances in technology, combined with the ever-evolving needs of the global market, are having a strong impact on the textile and clothing sector. The global textile and clothing industry: Technological advances and future challenges provides an essential review of these changes, and considers their implications for future strategies concerning production and marketing of textile products.Beginning with a review of trends in the global textile industry, the book goes on to consider the impact of environmental regulation on future textile products and processes. Following this, the importance of innovation-driven textile research and development, and the role of strategic technology roadmapping are highlighted. Both the present structure and future adaptation of higher education courses in textile science are reviewed, before recent advances in textile manufacturing technology, including joining techniques, 3D body scanning and garment design and explored in depth. Finally, The global textile and clothing industry concludes by considering automating textile preforming technology for the mass production of fibre-reinforced polymer (FRP) composites.With its distinguished editor and international team of expert contributors, The global textile and clothing industry: Technological advances and future challenges is an essential guide to key challenges and developments in this industrial sector.

  • Offshore Structures

    Design, Construction and Maintenance
    • 1 Edición
    • Mohamed A. El-Reedy
    • Inglés
    With most of the easy gas and oil reserves discovered and prices rebounding, companies are now drilling far offshore in extreme weather condition environments. As deepwater wells are drilled to greater depths, engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Offshore Structure Design, Construction and Maintenance covers all types of offshore structures and platforms employed worldwide. The ultimate reference for selecting, operating and maintaining offshore structures, this book provides a road map for designing structures which will stand up even in the harshest environments. The selection of the proper type of offshore structure is discussed from a technical and economic point of view. The design procedure for the fixed offshore structure will be presented and how to review the design to reach the optimum solution. Nonlinear analysis (Push over) analysis will be presented as a new technique to design and assess the existing structure. Pile design and tubular joint with the effect of fatigue loading will be presented also from a theoretical and a practical point of view. With this book in hand, engineers receive the most up-to-date methods for performing a structural life cycle analysis; implement maintenance plans for topsides and jackets, using non destructive testing. Under water inspection is discussed for hundreds of platforms in detail. Advanced repair methodology for scour, marine growth and damaged or deteriorating members are discussed. Risk based under water inspection techniques are covered from a practical pint of view. In addition, the book will be supported by an online modeling and simulation program with will allow designers to save time and money by verifying assumptions online.

  • Quantum Optics with Semiconductor Nanostructures

    • 1 Edición
    • Frank Jahnke
    • Inglés
    An understanding of the interaction between light and matter on a quantum level is of fundamental interest and has many applications in optical technologies. The quantum nature of the interaction has recently attracted great attention for applications of semiconductor nanostructures in quantum information processing. Quantum optics with semiconductor nanostructures is a key guide to the theory, experimental realisation, and future potential of semiconductor nanostructures in the exploration of quantum optics.Part one provides a comprehensive overview of single quantum dot systems, beginning with a look at resonance fluorescence emission. Quantum optics with single quantum dots in photonic crystal and micro cavities are explored in detail, before part two goes on to review nanolasers with quantum dot emitters. Light-matter interaction in semiconductor nanostructures, including photon statistics and photoluminescence, is the focus of part three, whilst part four explores all-solid-state quantum optics, crystal nanobeam cavities and quantum-dot microcavity systems. Finally, part five investigates ultrafast phenomena, including femtosecond quantum optics and coherent optoelectronics with quantum dots.With its distinguished editor and international team of expert contributors, Quantum optics with semiconductor nanostructures is an essential guide for all those involved with the research, development, manufacture and use of semiconductors nanodevices, lasers and optical components, as well as scientists, researchers and students.

  • Numerical Methods

    Using MATLAB
    • 3 Edición
    • George Lindfield + 1 más
    • Inglés
    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board.

  • DSP for Embedded and Real-Time Systems

    • 1 Edición
    • Robert Oshana
    • Inglés
    This Expert Guide gives you the techniques and technologies in digital signal processing (DSP) to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems you face in using DSP to develop embedded systems. With this book you will learn: A range of development techniques for developing DSP code Valuable tips and tricks for optimizing DSP software for maximum performance The various options available for constructing DSP systems from numerous software components The tools available for developing DSP applications Numerous practical guidelines from experts with wide and lengthy experience of DSP application development Features: Several areas of research being done in advanced DSP technology Industry case studies on DSP systems development DSP for Embedded and Real-Time Systems is the reference for both the beginner and experienced, covering most aspects of using today’s DSP techniques and technologies for designing and implementing an optimal embedded system.

  • Modern Earth Buildings

    Materials, Engineering, Constructions and Applications
    • 1 Edición
    • Matthew R Hall + 2 más
    • Inglés
    The construction of earth buildings has been taking place worldwide for centuries. With the improved energy efficiency, high level of structural integrity and aesthetically pleasing finishes achieved in modern earth construction, it is now one of the leading choices for sustainable, low-energy building. Modern earth buildings provides an essential exploration of the materials and techniques key to the design, development and construction of such buildings.Beginning with an overview of modern earth building, part one provides an introduction to design and construction issues including insulation, occupant comfort and building codes. Part two goes on to investigate materials for earth buildings, before building technologies are explored in part three including construction techniques for earth buildings. Modern earth structural engineering is the focus of part four, including the creation of earth masonry structures, use of structural steel elements and design of natural disaster-resistant earth buildings. Finally, part five of Modern earth buildings explores the application of modern earth construction through international case studies.With its distinguished editors and international team of expert contributors, Modern earth buildings is a key reference work for all low-impact building engineers, architects and designers, along with academics in this field.

  • Fast and Effective Embedded Systems Design

    Applying the ARM mbed
    • 1 Edición
    • Tim Wilmshurst + 1 más
    • Inglés
    Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded system design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed. C/C++ programming is applied, with a step-by-step approach which allows the novice to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues – intelligent instrumentation, networked systems, closed loop control, and digital signal processing. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology or technique introduced, and considers applications and the wider context. Numerous exercises and end of chapter questions are included.

  • Handbook of Natural Gas Transmission and Processing

    • 2 Edición
    • Saeid Mokhatab + 1 más
    • Inglés
    A unique, well-documented, and forward-thinking work, the second edition of Handbook of Natural Gas Transmission and Processing continues to present a thoroughly updated, authoritative, and comprehensive description of all major aspects of natural gas transmission and processing. It provides an ideal platform for engineers, technologists, and operations personnel working in the natural gas industry to get a better understanding of any special requirements for optimal design and operations of natural gas transmission pipelines and processing plants.

  • Advances in Imaging and Electron Physics

    Part A
    • 1 Edición
    • Volumen 172
    • Inglés
    This special volume of Advances in Imaging and Electron Physics details the current theory, experiments, and applications of neutron and x-ray optics and microscopy for an international readership across varying backgrounds and disciplines. Edited by Dr. Ted Cremer, these volumes attempt to provide rapid assimilation of the presented topics that include neutron and x-ray scatter, refraction, diffraction, and reflection and their potential application.

  • Construction Hazardous Materials Compliance Guide

    Mold Detection, Abatement and Inspection Procedures
    • 1 Edición
    • R. Dodge Woodson
    • Inglés
    While it would appear that contractors are not affected by the liabilities of the work of others, it is important that they understand the documentation that establishes culpability and the terms of restitution. A "boots on the ground" approach to the pre and post construction inspections as well as all activities in between, Construction Worksite Compliance Guide: Mold provides expert time saving tips to ensure that the job is done right the first time and according to state and Federal regulation. In this book, Woodson shares over 30 years of real-world experience for planning and monitoring the daily work activities on mold contaminated worksites. Packed with checklist, tables and "quick lookup" materials, this manual provides a step by step approach for monitoring workers who are performing the activities specified in a mold abatement work plans.

  • Handbook of Green Building Design and Construction

    LEED, BREEAM, and Green Globes
    • 1 Edición
    • Sam Kubba
    • Inglés
    Packed with conceptual sketches and photos, real world case studies and green construction details, Handbook of Green Building Design and Construction provides a wealth of practical guidelines and essential insights that will facilitate the design of green buildings. Written in an easy to understand style, the Handbook draws on over 35 years of personal experience across the world, offering vital information and penetrating insights into two major building rating systems such as LEED and BREEAM both used extensively in the United States, Europe, Asia and the Middle East.

  • Turbulence in Porous Media

    Modeling and Applications
    • 2 Edición
    • Marcelo J.S. de Lemos
    • Inglés
    Turbulence in Porous Media introduces the reader to the characterisation of turbulent flow, heat and mass transfer in permeable media, including analytical data and a review of available experimental data. Such transport processes occurring a relatively high velocity in permeable media are present in a number of engineering and natural flows. This new edition features a completely updated text including two new chapters exploring Turbulent Combustion and Moving Porous Media. De Lemos has expertly brought together a text that compiles, details, compares and evaluates available methodologies for modelling and simulating flow, providing an essential tour for engineering students working within the field as well as those working in chemistry, physics, applied mathematics, and geological and environmental sciences.

  • Innovation in Aeronautics

    • 1 Edición
    • T Young + 1 más
    • Inglés
    Innovation in aerospace design and engineering is essential to meet the many challenges facing this sector. Innovation in aeronautics explores both a range of innovative ideas and how the process of innovation itself can be effectively managed.After an introduction to innovation in aeronautics, part one reviews developments including biologically-inspire... technologies, morphing aerodynamic concepts, jet engine design drivers, and developments underpinned by digital technologies. The environment and human factors in innovation are also explored as are trends in supersonic passenger air travel. Part two goes on to examine change and the processes and management involved in innovative technology development. Challenges faced in aeronautical production are the focus of part three, which reviews topics such as intellectual property and patents, risk mitigation and the use of lean engineering. Finally, part four examines key issues in what makes for successful innovation in this sector.With its distinguished editors and international team of expert contributors, Innovation in aeronautics is an essential guide for all those involved in the design and engineering of aerospace structures and systems.

  • Switchmode RF and Microwave Power Amplifiers

    • 2 Edición
    • Andrei Grebennikov + 2 más
    • Inglés
    Combining solid theoretical discussions with practical design examples, this book is an essential reference on developing RF and microwave switchmode power amplifiers. With this book you will be able to: Design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors using well-known and novel theoretical approaches, nonlinear simulation tools, and practical design techniques Design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies, with specified output power Understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements Combine multi-stage Doherty architecture and switchmode power amplifiers to significantly increase efficiency of the entire radio transmitter Learn the different types of predistortion linearization techniques required to improve the quality of signal transmission in a nonlinear amplifying system New to this edition: Comprehensive overview of different Doherty architectures which are, and will be used in modern communication systems to save power consumption and reduce costs A new chapter on analog and digital predistortion techniques Coverage of broadband Class-F power amplifiers, high-power inverse Class-F power amplifiers for WCDMA systems, broadband Class-E techniques

  • Rules of Thumb for Chemical Engineers

    • 5 Edición
    • Stephen M Hall
    • Inglés
    Rules of Thumb for Chemical Engineers, Fifth Edition, provides solutions, common sense techniques, shortcuts, and calculations to help chemical and process engineers deal with practical on-the-job problems. It discusses physical properties for proprietary materials, pharmaceutical and biopharmaceutical sector heuristics, and process design, along with closed-loop heat transfer systems, heat exchangers, packed columns, and structured packings. Organized into 27 chapters, the book begins with an overview of formulae and data for sizing piping systems for incompressible and compressible flow. It then moves to a discussion of design recommendations for heat exchangers, practical equations for solving fractionation problems, along with design of reactive absorption processes. It also considers different types of pumps and presents narrative as well as tabular comparisons and application notes for various types of fans, blowers, and compressors. The book also walks the reader through the general rules of thumb for vessels, how cooling towers are sized based on parameters such as return temperature and supply temperature, and specifications of refrigeration systems. Other chapters focus on pneumatic conveying, blending and agitation, energy conservation, and process modeling. Online calculation tools, Excel workbooks, guidelines for hazardous materials and processes, and a searchable Rules of Thumb library are included. Chemical engineers faced with fluid flow problems will find this book extremely useful.

  • Colour Design

    Theories and Applications
    • 1 Edición
    • Janet Best
    • Inglés
    Given its importance in analysing and influencing the world around us, an understanding of colour is a vital tool in any design process. Colour design provides a comprehensive review of the issues surrounding the use of colour, from the fundamental principles of what colour is to its important applications across a vast range of industries.Part one covers the main principles and theories of colour, focusing on the human visual system and the psychology of colour perception. Part two goes on to review colour measurement and description, including consideration of international standards, approval methods for textiles and lithographic printing, and colour communication issues. Forecasting colour trends and methods for design enhancement are then discussed in part three along with the history of colour theory, dyes and pigments, and an overview of dye and print techniques. Finally, part four considers the use of colour across a range of specific applications, from fashion, art and interiors, to food and website design.With its distinguished editor and international team of contributors, Colour design is an invaluable reference tool for all those researching or working with colour and design in any capacity.

  • Modelling and Simulation of Integrated Systems in Engineering

    Issues of Methodology, Quality, Testing and Application
    • 1 Edición
    • D J Murray-Smith
    • Inglés
    This book places particular emphasis on issues of model quality and ideas of model testing and validation. Mathematical and computer-based models provide a foundation for explaining complex behaviour, decision-making, engineering design and for real-time simulators for research and training. Many engineering design techniques depend on suitable models, assessment of the adequacy of a given model for an intended application is therefore critically important. Generic model structures and dependable libraries of sub-models that can be applied repeatedly are increasingly important. Applications are drawn from the fields of mechanical, aeronautical and control engineering, and involve non-linear lumped-parameter models described by ordinary differential equations.

  • Laser Heating Applications

    Analytical Modelling
    • 1 Edición
    • Bekir Sami Yilbas
    • Inglés
    Thermal treatment of materials occupies a significant, increasing proportion of MSE activity and is an integral component of modern curricula as well as a highly monetized component of industrial production. Laser processing of materials offers advantages over conventional methods of processing. Some of these advantages include fast processing, precision of operation, low cost and local treatment. Analytical modeling of laser processing gives insight into the physical and mathematical aspects of the problem and provides useful information on process optimization. This work from Professor Yilbas, a world-recognized expert in laser materials processing, provides the necessary depth and weight of analysis, collating mathematical and physical modeling and experimentation with the necessary discussion of applications. It meets coherence in topics with high technical quality. It encompasses the basics of laser processing and provides an introduction to analytical modeling of the process. Fundamentals and formulation of the heating process are presented for numerous heating conditions.

Temas relacionados