Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Metal Fatigue Analysis Handbook

    Practical Problem-solving Techniques for Computer-aided Engineering
    • 1 Edición
    • Yung-Li Lee + 2 más
    • Inglés
    Understand why fatigue happens and how to model, simulate, design and test for it with this practical, industry-focused reference Written to bridge the technology gap between academia and industry, the Metal Fatigue Analysis Handbook presents state-of-the-art fatigue theories and technologies alongside more commonly used practices, with working examples included to provide an informative, practical, complete toolkit of fatigue analysis. Prepared by an expert team with extensive industrial, research and professorial experience, the book will help you to understand: Critical factors that cause and affect fatigue in the materials and structures relating to your work Load and stress analysis in addition to fatigue damage—the latter being the sole focus of many books on the topic How to design with fatigue in mind to meet durability requirements How to model, simulate and test with different materials in different fatigue scenarios The importance and limitations of different models for cost effective and efficient testing Whilst the book focuses on theories commonly used in the automotive industry, it is also an ideal resource for engineers and analysts in other disciplines such as aerospace engineering, civil engineering, offshore engineering, and industrial engineering.

  • Introduction to Optimum Design

    • 3 Edición
    • Jasbir Singh Arora
    • Inglés
    Introduction to Optimum Design, Third Edition describes an organized approach to engineering design optimization in a rigorous yet simplified manner. It illustrates various concepts and procedures with simple examples and demonstrates their applicability to engineering design problems. Formulation of a design problem as an optimization problem is emphasized and illustrated throughout the text. Excel and MATLAB® are featured as learning and teaching aids.

  • Starting Electronics

    • 4 Edición
    • Keith Brindley
    • Inglés
    Starting Electronics is unrivalled as a highly practical introduction for technicians, non-electronic engineers, software engineers, students, and hobbyists. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter, and the use of readily available, inexpensive components makes this practical exploration of electronics easily accessible to all levels of engineer and hobbyist. Other books tell readers what to do, but sometimes fail to explain why – Brindley gives readers hands-on confidence in addition to real scientific knowledge, and insight into the principles as well as the practice. All written explanations and steps are supplemented with numerous photos, charts, tables and graphs. Concepts and practical aspects are explained thoroughly with mathematical formulae and technical schematic drawings. Each chapter introduces a concept or tool, explains the basic theory, and provides clear instructions for a simple experiment to apply the concept or tool, with quiz sections and answers, at the end of each chapter. New chapters on multimeters and soldering will be added, covering the fundamentals and experiments, with a basic parts list and an expanded and updated buyer’s guide.

  • Up and Running with AutoCAD 2012

    2D and 3D Drawing and Modeling
    • 2 Edición
    • Elliot J. Gindis
    • Inglés
    Gindis introduces AutoCAD with step by step instructions, stripping away complexities to begin working in AutoCAD immediately. All concepts are explained first in theory, and then shown in practice, helping the reader understand what it is they are doing and why, before they do it. Divided into three parts, the book covers beginning through advanced AutoCAD, including 3D features. Also included is an extensive Appendix for each part, detailing additional useful CAD-related information not often found in other text books.The book contains supporting graphics (screen shots) and a summary with a self-test section at the end of each chapter. Also included are drawing examples and exercises, and two running “projects” that the student works on as he/she progresses through the chapters.

  • Up and Running with AutoCAD 2012

    2D Drawing and Modeling
    • 1 Edición
    • Elliot J. Gindis
    • Inglés
    Get "Up and Running" with AutoCAD using Gindis’ combination of step-by-step instruction, examples, and insightful explanations. The emphasis from the beginning is on core concepts and practical application of AutoCAD in architecture, engineering and design. Equally useful in instructor-led classroom training or self-study, the book is written with the student in mind by a long-time AutoCAD user and instructor based on what works in the industry and the classroom.

  • Tailor Welded Blanks for Advanced Manufacturing

    • 1 Edición
    • B Kinsey + 1 más
    • Inglés
    Tailor welded blanks are metallic sheets made from different strengths, materials, and/or thicknesses pre-welded together before forming into the final component geometry. By combining various sheets into a welded blank, engineers are able to ‘tailor’ the blank so that the properties are located precisely where they are needed and cost-effective, low weight components are produced. Tailor welded blanks for advanced manufacturing examines the manufacturing of tailor welded blanks and explores their current and potential future applications.Part one investigates processing and modelling issues in tailor welded blank manufacturing. Chapters discuss weld integrity, deformation during forming and the analytical and numerical simulation modelling of tailor welded blanks for advanced manufacturing. Part two looks at the current and potential future applications of tailor welded blanks. Chapters review tailor welded blanks of lightweight metals and of advanced high-strength steel and finally discuss the uses of tailor-welded blanks in the automotive and aerospace industries.With its distinguished editors and international team of expert contributors, Tailor welded blanks for advanced manufacturing proves an invaluable resource for metal fabricators, product designers, welders, welding companies, suppliers of welding machinery and anyone working in industries that use advanced materials such as in automotive and aerospace engineering. Engineers and academics involved in manufacturing and metallurgy may also find this book a useful reference.

  • Concrete Portable Handbook

    • 1 Edición
    • R. Dodge Woodson
    • Inglés
    Whether or not, you are on the job site or back in the office, this book will help you to avoid mistakes, code violations, and wasted time and money. The book’s four part treatment begins with constituent materials followed by self contained parts on Concrete Properties, Processes, and Concrete Repair and Rehabilitation. Designed to be an "all in one" reference, the author includes a wealth information for the most popular types of testing. This includes: Analysis of Fresh Concrete; Testing Machines; Accelerated Testing Methods; Analysis of Hardened Concrete and Mortar; Core Sampling and Testing; Assessment of Concrete Construction ; Repair; Quality Concepts; Quality Control; Statistics; Standards, Specifications, and Codes of Practice. With this book in hand, construction engineers and even technicians find valuable information regarding Exposed Concrete Finishes, Repairing Concrete, Formwork, Precast Concrete, Concrete Roads, and Industrial Floors. Project managers and owners will find this reference a valuable guide to concrete both in terms of its applications in construction projects and the science and chemistry of concrete for its own sake.

  • Applied Plastics Engineering Handbook

    Processing and Materials
    • 1 Edición
    • Myer Kutz
    • Inglés
    A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them.

  • Advances in Imaging and Electron Physics

    Optics of Charged Particle Analyzers
    • 1 Edición
    • Volumen 168
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Fluid Mechanics

    • 5 Edición
    • Pijush K. Kundu + 2 más
    • Inglés
    Fluid mechanics, the study of how fluids behave and interact under various forces and in various applied situations—whether in the liquid or gaseous state or both—is introduced and comprehensively covered in this widely adopted text. Revised and updated by Dr. David Dowling, Fluid Mechanics, 5e is suitable for both a first or second course in fluid mechanics at the graduate or advanced undergraduate level.

  • Polymer Matrix Composites and Technology

    • 1 Edición
    • Ru-Min Wang + 2 más
    • Inglés
    Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials.

  • Collaborative Product Assembly Design and Assembly Planning

    Methodologies and Applications
    • 1 Edición
    • C. Lu + 2 más
    • Inglés
    Collaborative product assembly design and assembly planning presents several newly-developed methodologies and applications for collaborative assembly design and assembly planning, two important steps during the product development life cycle. These benefits include effective and rapid assembly design and assembly planning, thereby reducing the development cost and helping manufacturers enhance profit. With increased development in computer technologies and the Internet, the traditional assembly design and assembly planning have evolved around collaborative assembly design and assembly planning to speed up the product development process. Research in this area has attracted much attention in the past decade. Based on research work in the past few years, this book will present several newly-developed methodologies and applications for collaborative assembly design and assembly planning to improve the efficiency of product development in a collaborative design environment.

  • Engineering Rock Mass Classification

    Tunnelling, Foundations and Landslides
    • 1 Edición
    • R K Goel + 1 más
    • Inglés
    Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design.

  • Matlab

    A Practical Introduction to Programming and Problem Solving
    • 2 Edición
    • Dorothy C. Attaway
    • Inglés
    MATLAB: A Practical Introduction to Programming and Problem Solving, Second Edition, is the only book that gives a full introduction to programming in MATLAB combined with an explanation of MATLAB’s powerful functions, enabling engineers to fully exploit the software’s power to solve engineering problems. The text aims to provide readers with the knowledge of the fundamentals of programming concepts and the skills and techniques needed for basic problem solving using MATLAB as the vehicle. The book presents programming concepts such as variables, assignments, input/output, and selection statements as well as MATLAB built-in functions side-by-side, giving students the ability to program efficiently and exploit the power of MATLAB to solve problems. In-depth coverage is given to input/output, a topic that is fundamental to many engineering applications. A systematic, step-by-step approach that builds on concepts is used throughout the book, facilitating easier learning. There are also sections on ‘common pitfalls’ and ‘programming guidelines’ that direct students towards best practice. This book will be an invaluable resource for engineers, engineering novices, and students learning to program and model in MATLAB.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 167
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Superplastic Forming of Advanced Metallic Materials

    Methods and Applications
    • 1 Edición
    • G Giuliano
    • Inglés
    Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process.Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys.With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering.Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error.

  • Adhesives Technology for Electronic Applications

    Materials, Processing, Reliability
    • 2 Edición
    • James J. Licari + 1 más
    • Inglés
    Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book particularly important for engineers and managers alike. The third edition has been updated throughout and includes new sections on nanomaterials, environmental impacts and new environmentally friendly ‘green’ adhesives. Information about regulations and compliance has been brought fully up-to-date. As well as providing full coverage of standard adhesive types, Licari explores the most recent developments in fields such as: • Tamper-proof adhesives for electronic security devices. • Bio-compatible adhesives for implantable medical devices. • Electrically conductive adhesives to replace toxic tin-lead solders in printed circuit assembly – as required by regulatory regimes, e.g. the EU’s Restriction of Hazardous Substances Directive or RoHS (compliance is required for all products placed on the European market). • Nano-fillers in adhesives, used to increase the thermal conductivity of current adhesives for cooling electronic devices.

  • Vacuum Deposition onto Webs, Films and Foils

    • 2 Edición
    • Charles Bishop
    • Inglés
    Roll-to-roll vacuum deposition is the technology that applies an even coating to a flexible material that can be held on a roll and provides a much faster and cheaper method of bulk coating than deposition onto single pieces or non-flexible surfaces, such as glass. This technology has been used in industrial-scale applications for some time, including a wide range of metalized packaging (e.g. snack packets). Its potential as a high-speed, scalable process has seen an increasing range of new products emerging that employ this cost-effective technology: solar energy products are moving from rigid panels onto flexible substrates, which are cheaper and more versatile in a similar way, electronic circuit ‘boards’ can be produced on a flexible polymer, creating a new range of ‘flexible electronics’ products flexible displays are another area of new technology in vacuum coating, with flexible display panels and light sources emerging Charles Bishop has written this book to meet the need he identified, as a trainer and consultant to the vacuum coatings industry, for a non-mathematical guide to the technologies, equipment, processes and applications of vacuum deposition. His book is aimed at a wide audience of engineers, technicians and production management. It also provides a guide to the subject for sectors in which vacuum deposition is a novel technology, such as solar energy and flexible electronics.

  • Reliability, Maintainability and Risk

    Practical Methods for Engineers including Reliability Centred Maintenance and Safety-Related Systems
    • 8 Edición
    • David J. Smith
    • Inglés
    Reliability, Maintainability and Risk: Practical Methods for Engineers, Eighth Edition, discusses tools and techniques for reliable and safe engineering, and for optimizing maintenance strategies. It emphasizes the importance of using reliability techniques to identify and eliminate potential failures early in the design cycle. The focus is on techniques known as RAMS (reliability, availability, maintainability, and safety-integrity). The book is organized into five parts. Part 1 on reliability parameters and costs traces the history of reliability and safety technology and presents a cost-effective approach to quality, reliability, and safety. Part 2 deals with the interpretation of failure rates, while Part 3 focuses on the prediction of reliability and risk. Part 4 discusses design and assurance techniques; review and testing techniques; reliability growth modeling; field data collection and feedback; predicting and demonstrating repair times; quantified reliability maintenance; and systematic failures. Part 5 deals with legal, management and safety issues, such as project management, product liability, and safety legislation.

  • Fire Fighting Pumping Systems at Industrial Facilities

    • 2 Edición
    • Dennis P. Nolan
    • Inglés
    Written from the perspective of industrial users, this is the only book that describes how to install an effective firewater pumping system in a pragmatic and budget-conscious way rather than with purely the regulatory framework in mind. Based on the wide-ranging industrial experience of the author, this book is also the only one that deals with the particular risks and requirements of off-shore facilities. This book takes the reader beyond the prescriptive requirements of the fire code (NFPA, UL) and considers how to make the best choice of design for the budget available as well as how to ensure the other components of the pumping system and supporting services are optimized.

  • Multidimensional Signal, Image, and Video Processing and Coding

    • 2 Edición
    • John W. Woods
    • Inglés
    Multidimensional Signal, Image, and Video Processing and Coding gives a concise introduction to both image and video processing, providing a balanced coverage between theory, applications and standards. It gives an introduction to both 2-D and 3-D signal processing theory, supported by an introduction to random processes and some essential results from information theory, providing the necessary foundation for a full understanding of the image and video processing concepts that follow. A significant new feature is the explanation of practical network coding methods for image and video transmission. There is also coverage of new approaches such as: super-resolution methods, non-local processing, and directional transforms. Multidimensional Signal, Image, and Video Processing and Coding also has on-line support that contains many short MATLAB programs that complement examples and exercises on multidimensional signal, image, and video processing. There are numerous short video clips showing applications in video processing and coding, plus a copy of the vidview video player for playing .yuv video files on a Windows PC and an illustration of the effect of packet loss on H.264/AVC coded bitstreams. New to this edition: New appendices on random processes, information theory New coverage of image analysis – edge detection, linking, clustering, and segmentation Expanded coverage on image sensing and perception, including color spaces Now summarizes the new MPEG coding standards: scalable video coding (SVC) and multiview video coding (MVC), in addition to coverage of H.264/AVC Updated video processing material including new example on scalable video coding and more material on object- and region-based video coding More on video coding for networks including practical network coding (PNC), highlighting the significant advantages of PNC for both video downloading and streaming New coverage of super-resolution methods for image and video

  • Computed Radiation Imaging

    Physics and Mathematics of Forward and Inverse Problems
    • 1 Edición
    • Esam M A Hussein
    • Inglés
    Computer-assisted imaging with radiation (x- and gamma rays) is an integral part of modern medical-diagnostic practice. This imaging technology is also slowly finding its way into industrial applications. Although the technology is well developed, there is a need for further improvement to enhance image quality, reduce artifacts, minimize patient radiation exposure, compete with and complement other imaging methods (such as magnetic resonance imaging and ultrasonics), and accommodate dense and large objects encountered in industrial applications.Scienti... and engineers, attempting to progress this technology, are faced with an enormous amount of literature, addressing the imaging problem from various view points. This book provides a single source that addresses both the physical and mathematical aspects of the imaging problem in a consistent and comprehensive manner.

  • Diesel Engine System Design

    • 1 Edición
    • Qianfan Xin
    • Inglés
    Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle.

  • Advanced Adhesives in Electronics

    Materials, Properties and Applications
    • 1 Edición
    • M O Alam + 1 más
    • Inglés
    Adhesives for electronic applications serve important functional and structural purposes in electronic components and packaging, and have developed significantly over the last few decades. Advanced adhesives in electronics reviews recent developments in adhesive joining technology, processing and properties.The book opens with an introduction to adhesive joining technology for electronics. Part one goes on to cover different types of adhesive used in electronic systems, including thermally conductive adhesives, isotropic and anisotropic conductive adhesives and underfill adhesives for flip-chip applications. Part two focuses on the properties and processing of electronic adhesives, with chapters covering the structural integrity of metal-polymer adhesive interfaces, modelling techniques used to assess adhesive properties and adhesive technology for photonics.With its distinguished editors and international team of contributors, Advanced adhesives in electronics is a standard reference for materials scientists, engineers and chemists using adhesives in electronics, as well as those with an academic research interest in the field.

  • Logistics Operations and Management

    Concepts and Models
    • 1 Edición
    • Reza Farahani + 2 más
    • Inglés
    This book provides a comprehensive overview of how to strategically manage the movement and storage of products or materials from any point in the manufacturing process to customer fulfillment. Topics covered include important tools for strategic decision making, transport, packaging, warehousing, retailing, customer services and future trends.

  • Minimization of Welding Distortion and Buckling

    Modelling and Implementation
    • 1 Edición
    • Pan Michaleris
    • Inglés
    Welding is a cost-effective and flexible method of fabricating large structures, but drawbacks such as residual stress, distortion and buckling must be overcome in order to optimize structural performance. Minimization of welding distortion and buckling provides a systematic overview of the methods of minimizing distortion and buckling in welded structures.Following an introductory chapter, part one focuses on understanding welding stress and distortion, with chapters on such topics as computational welding mechanics, modelling the effect of phase transformations on welding stress and distortion and using computationally efficient reduced-solution methods to understand welding distortion. Part two covers different methods of minimizing welding distortion. Chapters discuss methods such as differential heating for minimizing distortion in welded stiffeners, dynamic thermal tensioning, reverse-side heating and ways of minimizing buckling such as weld cooling and hybrid laser arc welding.With its distinguished editor and international team of contributors, Minimization of welding distortion and buckling is an essential reference for all welders and engineers involved in fabrication of metal end-products, as well as those in industry and academia with a research interest in the area.

  • Forsthoffer's Best Practice Handbook for Rotating Machinery

    • 1 Edición
    • William E. Forsthoffer
    • Inglés
    Optimize plant asset safety and reliability while minimizing operating costs with this invaluable guide to the engineering, operation and maintenance of rotating equipment Based upon his multi-volume Rotating Equipment Handbooks, Forsthoffer’s Best Practice Handbook for Rotating Machinery summarises, expands and updates the content from these previous books in a convenient all-in-one volume. Offering comprehensive technical coverage and insider information on best practices derived from lessons learned in the engineering, operation and maintenance of a wide array of rotating equipment, this new title presents: A unique "Best Practice" and "Lessons Learned" chapter framework, providing bite-sized, troubleshooting instruction on complex operation and maintenance issues across a wide array of industrial rotating machinery. Five chapters of completely new material combined with updated material from earlier volumes, making this the most comprehensive and up-to-date handbook for rotary equipment currently available. Intended for maintenance, engineering, operation and management, Forsthoffer’s Best Practice Handbook for Rotating Machinery is a one-stop resource, packed with a lifetime’s rotating machinery experience, to help you improve efficiency, safety, reliability and cost.

  • Experiment and Calculation of Reinforced Concrete at Elevated Temperatures

    • 1 Edición
    • Zhenhai Guo
    • Inglés
    Concrete as a construction material goes through both physical and chemical changes under extreme elevated temperatures. As one of the most widely used building materials, it is important that both engineers and architects are able to understand and predict its behavior in under extreme heat conditions. Brief and readable, this book provides the tools and techniques to properly analysis the effects of high temperature of reinforced concrete which will lead to more stable, safer structures. Based on years of the author’s research, Reinforced Concrete at Elevated Temperatures four part treatment starts with an unambiguous and thorough exposition of the mechanical behaviors of materials at elevated temperature followed by a discussion of Temperature field of member sections, Mechanical behaviors of members and structures at elevated temperature, ending with Theoretical analysis and practical calculation methods. The book provides unique insight into: Coupling thermal-mechanical constitutive relation of concrete Exceptional analyses of beams and columns of rectangular section with three surfaces and two adjacent surfaces exposing to high temperature Measurement and analysis of redistribution of internal forces of statically indeterminate structure during heating-loading process Finite element analysis and calculation charts for two-dimensional temperature field of structural members Finite element analysis and simplified calculation method for reinforced concrete structure at elevated temperature With this book, engineers and architects can effectively analyze the effect of high temperature on concrete and materials which will lead to better designs of fire resistant and damage evaluation and treatment after fire.

  • Building Decorative Materials

    • 1 Edición
    • Yan Li + 1 más
    • Inglés
    Buildings should not only be functional but aesthetically pleasing. This requires the use of decorative materials both on the exterior and inside a building. Building decorative materials reviews the range of materials available and their potential applications.The book begins by considering the main types of decorative material and the physical, mechanical and other properties they require. It then discusses types and potential uses of decorative stone materials such as marble, granite, slate or gypsum. It then goes on to discuss the ways cement and concrete can be used for decorative effect, before considering the role of ceramics in such areas as tiling. The following chapters review decorative glass for windows or facades, metals and wood before assessing polymer materials such as plastics and textiles. The final group of chapters discuss coatings, including waterproofing materials, multi-functional materials used for such purposes as soundproofing and thermal insulation, and the use of more sustainable decorative materials.Building decorative materials is a useful reference for architects, civil engineers and those studying civil or structural engineering.

  • Building Materials in Civil Engineering

    • 1 Edición
    • Haimei Zhang
    • Inglés
    The construction of buildings and structures relies on having a thorough understanding of building materials. Without this knowledge it would not be possible to build safe, efficient and long-lasting buildings, structures and dwellings. Building materials in civil engineering provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries.The book begins with an introductory chapter describing the basic properties of building materials. Further chapters cover the basic properties of building materials, air hardening cement materials, cement, concrete, building mortar, wall and roof materials, construction steel, wood, waterproof materials, building plastics, heat-insulating materials and sound-absorbing materials and finishing materials. Each chapter includes a series of questions, allowing readers to test the knowledge they have gained. A detailed appendix gives information on the testing of building materials.With its distinguished editor and eminent editorial committee, Building materials in civil engineering is a standard introductory reference book on the complete range of building materials. It is aimed at students of civil engineering, construction engineering and allied courses including water supply and drainage engineering. It also serves as a source of essential background information for engineers and professionals in the civil engineering and construction sector.

  • Vehicle thermal Management Systems Conference and Exhibition (VTMS10)

    • 1 Edición
    • Institution of Mechanical Engineers, SAE IMechE
    • Inglés
    This book contains the papers presented at the IMechE and SAE International, Vehicle Thermal Management Systems Conference (VTMS10), held at the Heritage Motor Centre, Gaydon, Warwickshire, 15-19th May 2011. VTMS10 is an international conference organised by the Automobile Division and the Combustion Engines and Fuels Group of the IMechE and SAE International. The event is aimed at anyone involved with vehicle heat transfer, members of the OEM, tier one suppliers, component and software suppliers, consultants, and academics interested in all areas of thermal energy management in vehicles. This vibrant conference, the tenth VTMS, addresses the latest analytical and development tools and techniques, with sessions on: alternative powertrain, emissions, engines, heat exchange/manufacture... heating, A/C, comfort, underhood, and external/internal component flows. It covers the latest in research and technological advances in the field of heat transfer, energy management, comfort and the efficient management of all thermal systems within the vehicle.

  • Pressure Vessels

    External Pressure Technology
    • 2 Edición
    • Carl T. F. Ross
    • Inglés
    The choice of structural design and material is essential in preventing the external walls of a vessel from buckling under pressure. In this revised second edition of Pressure vessels, Carl Ross reviews the problem and uses both theoretical and practical examples to show how it can be solved for different structures.The second edition opens with an overview of the types of vessels under external pressure and materials used for construction. Axisymmetric deformation and different types of instability are discussed in the following chapters, with chapters 5 and 6 covering vibration of pressure vessel shells, both in water and out. Chapters 7 and 8 focus on novel pressure hulls, covering design, vibration and collapse, while chapters 9 and 10 concentrate on the design and non-linear analysis of submarine pressure hulls under external hydrostatic pressure. In chapter 11, the design, structure and materials of deep-diving underwater pressure vessels are discussed, focusing on their application in missile defence systems. Finally, chapter 12 analyses the vibration of a thin-walled shell under external water pressure, using ANSYS technology.Drawing on the author’s extensive experience in engineering and design both in an industrial and academic capacity, the second edition of Pressure vessels is an essential reference for stress analysts, designers, consultants and manufacturers of pressure vessels, as well as all those with an academic research interest in the area.

  • User Experience Management

    Essential Skills for Leading Effective UX Teams
    • 1 Edición
    • Arnie Lund
    • Inglés
    User Experience Management: Essential Skills for Leading Effective UX Teams deals with specific issues associated with managing diverse user experience (UX) skills, often in corporations with a largely engineering culture. Part memoir and part handbook, it explains what it means to lead a UX team and examines the management issues of hiring, inheriting, terminating, layoffs, interviewing and candidacy, and downsizing. The book offers guidance on building and creating a UX team, as well as equipping and focusing the team. It also considers ways of nurturing the team, from coaching and performance reviews to conflict management and creating work-life balance. Furthermore, it discusses the essential skills needed in leading an effective team and developing a communication plan. This book will be valuable to new managers and leaders, more experienced managers, and anyone who is leading or managing UX groups or who is interested in assuming a leadership role in the future.

  • Fracture and Fatigue of Welded Joints and Structures

    • 1 Edición
    • K Macdonald
    • Inglés
    The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process.Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures.With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field.

  • Non-Crimp Fabric Composites

    Manufacturing, Properties and Applications
    • 1 Edición
    • Stepan V Lomov
    • Inglés
    Non-crimp fabric (NCF) composites are reinforced with mats of straight (non-crimped) fibres, giving them such advantages as strength, ease of handling and low manufacturing costs. Non-crimp fabric composites provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering.Part one covers the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis. Part two goes on to discuss the manufacture of non-crimp fabric composites, with chapters covering such topics as deformability and permeability of NCF. Part three focuses on the properties of NCF composites, with chapters on stiffness and strength, damage progression and fatigue. Finally, part four covers the applications of NCF composites, including chapters on the aerospace and automotive industries as well as wind turbines and helicopter applications. The book concludes with a discussion of cost analysis of NCF composites in engineering applications.With its distinguished editor and international team of expert contributors, Non-crimp fabric composites is an essential reference for composite manufacturers and structural and mechanical engineers in industries using NCF composites, as well as academics with a research interest in the field.

  • Fibrous and Composite Materials for Civil Engineering Applications

    • 1 Edición
    • R Fangueiro
    • Inglés
    The use of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles, is an important and interesting development. Fibrous and composite materials for civil engineering applications analyses the types and properties of fibrous textile and structures and their applications in reinforcement and civil engineering.Part one introduces different types of fibrous textiles and structures. Chapters cover the properties of natural and man-made fibres and of yarns, as well as an overview of textile structures. Part two focuses on fibrous material use in concrete reinforcement, with chapters on the properties and applications of steel fibre reinforced concrete, natural fibre reinforced concrete and the role of fibre reinforcement in mitigating shrinkage cracks. In part three, the applications of fibrous material-based composites in civil engineering are covered. Chapters concentrate on production techniques and applications such as reinforcement of internal structures, structural health monitoring and textile materials in architectural membranes.With its distinguished editor and international team of contributors, Fibrous and composite materials for civil engineering applications is a standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field.

  • Textile Design

    Principles, Advances and Applications
    • 1 Edición
    • A Briggs-Goode + 1 más
    • Inglés
    Textile design is a complex field of practice which operates in a competitive, global industry. Designers need to take into account not only the design but also the manufacture, technological development and application of the final product. Textile design provides a broad overview of the fundamentals of and advances in textile design, as well as practical case studies of relevant industries.Part one covers the principles of fabric construction as applied to textile design, with chapters on fundamental principles, woven and knitted textile design. Part two discusses surface approaches to textile design, with chapters on such topics as surface design of textiles, printed and embroidered textile design, dyeing and finishing and the use of colour in textile design. Finally, part three focuses on the applications and advances in textile design, including chapters covering colour trend forecasting, sustainable textile design, fashion, interior and 2D to 3D design considerations and new developments in technical and future textiles.With its distinguished editors and international team of contributors, Textile design is an essential reference for design professionals in the textile and fashion industries, as well as those who specialise in interior textiles and academics with a research interest in the area.

  • Electronics Simplified

    • 3 Edición
    • Ian Sinclair
    • Inglés
    Electronics Simplified, Third Edition, discusses the aims and methods of electronics, with emphasis on digital electronics and software options. It covers the latest developments in electronics, including Blu-ray, digital TV and radio, HD and 3D TV, robotic systems, radar, cellular phones, GPS, and microcomputers. Organized into 17 chapters, the book introduces the reader to every aspect of electronics from fundamentals to applications, with minimal mathematics required. It provides an overview of electricity, waves, and pulses and how a steady voltage is generated, along with power, alternating voltage, and AC and DC transmission. The information on microcomputers has been greatly expanded, while information on analog fundamentals has been retained. It also discusses passive components such as transformers, resistors and capacitors, inductors, transformers, resonance, and diodes; active components and integrated circuits, particularly what a transistor is and what it does; how traditional radio works; elements of television, including color television; digital television and radio broadcasting; and digital signals and digital recording. Finally, the principles of CD recording are explained, along with the basics of microprocessors, calculators, computers, and computer peripherals. This book is essential reading for hobbyists, technicians, professionals, and students. It is suitable for anyone taking a qualification course in electronics, or for those who want to know more about the digital revolution.

  • Brave NUI World

    Designing Natural User Interfaces for Touch and Gesture
    • 1 Edición
    • Daniel Wigdor + 1 más
    • Inglés
    Brave NUI World is the first practical guide for designing touch- and gesture-based user interfaces. Written by the team from Microsoft that developed the multi-touch, multi-user Surface® tabletop product, it introduces the reader to natural user interfaces (NUI). It gives readers the necessary tools and information to integrate touch and gesture practices into daily work, presenting scenarios, problem solving, metaphors, and techniques intended to avoid making mistakes. This book considers diverse user needs and context, real world successes and failures, and the future of NUI. It presents thirty scenarios, giving practitioners a multitude of considerations for making informed design decisions and helping to ensure that missteps are never made again. The book will be of value to game designers as well as practitioners, researchers, and students interested in learning about user experience design, user interface design, interaction design, software design, human computer interaction, human factors, information design, and information architecture.

  • Rotary Kilns

    Transport Phenomena and Transport Processes
    • 1 Edición
    • Akwasi A. Boateng
    • Inglés
    Rotary Kilns—rotating industrial drying ovens—are used for a wide variety of applications including processing raw minerals and feedstocks as well as heat-treating hazardous wastes. They are particularly critical in the manufacture of Portland cement. Their design and operation is critical to their efficient usage, which if done incorrectly can result in improperly treated materials and excessive, high fuel costs. This professional reference book will be the first comprehensive book in many years that treats all engineering aspects of rotary kilns, including a thorough grounding in the thermal and fluid principles involved in their operation, as well as how to properly design an engineering process that uses rotary kilns.Chapter 1: The Rotary Kiln Evolution & PhenomenonChapter 2: Basic Description of Rotary Kiln Operation Chapter 3: Freeboard Aerodynamic PhenomenaChapter 4: Granular Flows in Rotary KilnsChapter 5: Mixing & Segregation Chapter 6: Combustion and Flame Chapter 7: Freeboard Heat TransferChapter 8: Heat Transfer Processes in the Rotary Kiln BedChapter 9: Mass & Energy BalanceChapter 10: Rotary Kiln Minerals Process Applications

  • Polymer-Carbon Nanotube Composites

    Preparation, Properties and Applications
    • 1 Edición
    • Tony McNally + 1 más
    • Inglés
    Understanding the properties of polymer carbon nanotube (CNT) composites is the key to these materials finding new applications in a wide range of industries, including but not limited to electronics, aerospace and biomedical/bioengine... Polymer-carbon nanotube composites provides comprehensive and in-depth coverage of the preparation, characterisation, properties and applications of these technologically interesting new materials.Part one covers the preparation and processing of composites of thermoplastics with CNTs, with chapters covering in-situ polymerization, melt processing and CNT surface treatment, as well as elastomer and thermoset CNT composites. Part two concentrates on properties and characterization, including chapters on the quantification of CNT dispersion using microscopy techniques, and on topics as diverse as thermal degradation of polymer/CNT composites, the use of rheology, Raman spectroscopy and multi-scale modelling to study polymer/CNT composites, and CNT toxicity. In part three, the applications of polymer/CNT composites are reviewed, with chapters on specific applications such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing.With its distinguished editors and international team of contributors, Polymer-carbon nanotube composites is an essential reference for scientists, engineers and designers in high-tech industry and academia with an interest in polymer nanotechnology and nanocomposites.

  • Developments in Surface Contamination and Cleaning, Volume 3

    Methods for Removal of Particle Contaminants
    • 1 Edición
    • Rajiv Kohli + 1 más
    • Inglés
    The contributions in this volume cover methods for removal of particle contaminants on surfaces. Several of these methods are well established and have been employed in industrial applications for a long time. However, the ever- higher demand for removal of smaller particles on newer substrate materials is driving continuous development of the established cleaning methods and alternative innovative methods for particle removal. This book provides information on the latest developments in this topic area.

  • Wireless Communications Over Rapidly Time-Varying Channels

    • 1 Edición
    • Franz Hlawatsch + 1 más
    • Inglés
    As a result of higher frequencies and increased user mobility, researchers and systems designers are shifting their focus from time-invariant models to channels that vary within a block. Wireless Communications Over Rapidly Time-Varying Channels explains the latest theoretical advances and practical methods to give an understanding of rapidly time varying channels, together with performance trade-offs and potential performance gains, providing the expertise to develop future wireless systems technology. As well as an overview of the issues of developing wireless systems using time-varying channels, the book gives extensive coverage to methods for estimating and equalizing rapidly time-varying channels, including a discussion of training data optimization, as well as providing models and transceiver methods for time-varying ultra-wideband channels.

  • Stability of Structures

    Principles and Applications
    • 1 Edición
    • Chai H Yoo + 1 más
    • Inglés
    The current trend of building more streamlined structures has made stability analysis a subject of extreme importance. It is mostly a safety issue because Stability loss could result in an unimaginable catastrophe. Written by two authors with a combined 80 years of professional and academic experience, the objective of Stability of Structures: Principles and Applications is to provide engineers and architects with a firm grasp of the fundamentals and principles that are essential to performing effective stability analysts. Concise and readable, this guide presents stability analysis within the context of elementary nonlinear flexural analysis, providing a strong foundation for incorporating theory into everyday practice. The first chapter introduces the buckling of columns. It begins with the linear elastic theory and proceeds to include the effects of large deformations and inelastic behavior. In Chapter 2 various approximate methods are illustrated along with the fundamentals of energy methods. The chapter concludes by introducing several special topics, some advanced, that are useful in understanding the physical resistance mechanisms and consistent and rigorous mathematical analysis. Chapters 3 and 4 cover buckling of beam-columns. Chapter 5 presents torsion in structures in some detail, which is one of the least well understood subjects in the entire spectrum of structural mechanics. Strictly speaking, torsion itself does not belong to a topic in structural stability, but needs to be covered to some extent for a better understanding of buckling accompanied with torsional behavior. Chapters 6 and 7 consider stability of framed structures in conjunction with torsional behavior of structures. Chapters 8 to 10 consider buckling of plate elements, cylindrical shells, and general shells. Although the book is primarily devoted to analysis, rudimentary design aspects are discussed.

  • Pervasive Information Architecture

    Designing Cross-Channel User Experiences
    • 1 Edición
    • Andrea Resmini + 1 más
    • Inglés
    Pervasive Information Architecture explains the ‘why’ and ‘how’ of pervasive information architecture (IA) through detailed examples and real-world stories. It offers insights about trade-offs that can be made and techniques for even the most unique design challenges. The book will help readers master agile information structures while meeting their unique needs on such devices as smart phones, GPS systems, and tablets. The book provides examples showing how to: model and shape information to adapt itself to users’ needs, goals, and seeking strategies; reduce disorientation and increase legibility and way-finding in digital and physical spaces; and alleviate the frustration associated with choosing from an ever-growing set of information, services, and goods. It also describes relevant connections between pieces of information, services and goods to help users achieve their goals. This book will be of value to practitioners, researchers, academics, andstudents in user experience design, usability, information architecture, interaction design, HCI, web interaction/interfac... designer, mobile application design/development, and information design. Architects and industrial designers moving into the digital realm will also find this book helpful.

  • 4G: LTE/LTE-Advanced for Mobile Broadband

    • 1 Edición
    • Erik Dahlman + 2 más
    • Inglés
    LTE (Long Term Evolution) is the 3GPP's (3rd Generation Partnership Project) new standard and accompanying technologies that mobile network operators such as ATT, Verizon and TeliaSonera are adopting for their networks. To move to higher-speed networks that can cater to customer demand for mobile broadband multimedia applications, the 3GPP has developed the latest LTE-Advanced (LTE Release 10) standard, which will be fixed in December 2010. This book focuses on LTE and LTE-Advanced, and provides engineers with real insight and understanding into the why and how of the standard and its related technologies. This book is written by engineers from Ericsson--the world's leading telecommunications supplier--who was heavily involved in the development of the standard.

  • Advances in Knitting Technology

    • 1 Edición
    • K F Au
    • Inglés
    Knitted textiles and apparel represent approximately one third of the global textile market. This book provides an updated reference to Knitting technology, with specific focus on the developments in knitted fabric production and textile applications.The first set of chapters begin with a brief review of the fundamental principles of knitting, including the types and suitability of yarns for knitting as well as the properties achieved through knitted fabrics. The second part of the book examines the major advances in knitting, such as intelligent yarn delivery systems in weft knitting, knitted fabric composites and advances in circular knitting. The concluding section of the book presents a selection of case studies where advanced knitted products are used. Topics range from knitted structures for moisture management to weft knitted structures for sound absorption.With its distinguished editor and array of international contributors, Advances in knitting technology is an important text for designers, engineers and technicians involved in the manufacture and use of knitted textiles and garments. It will also be relevant for academics and students.

  • The Definitive Guide to the ARM Cortex-M0

    • 1 Edición
    • Joseph Yiu
    • Inglés
    The Definitive Guide to the ARM Cortex-M0 is a guide for users of ARM Cortex-M0 microcontrollers. It presents many examples to make it easy for novice embedded-software developers to use the full 32-bit ARM Cortex-M0 processor. It provides an overview of ARM and ARM processors and discusses the benefits of ARM Cortex-M0 over 8-bit or 16-bit devices in terms of energy efficiency, code density, and ease of use, as well as their features and applications. The book describes the architecture of the Cortex-M0 processor and the programmers model, as well as Cortex-M0 programming and instruction set and how these instructions are used to carry out various operations. Furthermore, it considers how the memory architecture of the Cortex-M0 processor affects software development; Nested Vectored Interrupt Controller (NVIC) and the features it supports, including flexible interrupt management, nested interrupt support, vectored exception entry, and interrupt masking; and Cortex-M0 features that target the embedded operating system. It also explains how to develop simple applications on the Cortex-M0, how to program the Cortex-M0 microcontrollers in assembly and mixed-assembly languages, and how the low-power features of the Cortex-M0 processor are used in programming. Finally, it describes a number of ARM Cortex-M0 products, such as microcontrollers, development boards, starter kits, and development suites. This book will be useful to both new and advanced users of ARM Cortex devices, from students and hobbyists to researchers, professional embedded- software developers, electronic enthusiasts, and even semiconductor product designers.

  • Introduction to Dislocations

    • 5 Edición
    • Derek Hull + 1 más
    • Inglés
    In materials science, dislocations are irregularities within the crystal structure or atomic scale of engineering materials, such as metals, semi-conductors, polymers, and composites. Discussing this specific aspect of materials science and engineering, Introduction to Dislocations is a key resource for students. The book provides students and practitioners with the fundamental principles required to understand dislocations. Comprised of 10 chapters, the text includes advanced computer modeling and very high-resolution electron microscopy to help readers better understand the structure of atoms close to the core of dislocations. It shows that atomic arrangement has a significant effect on the formation of dislocations and thereby on the properties of solids. The first two chapters of the book present an overview of dislocations. The crystal structures and the various defects and dislocations are discussed, and methods of observation and diagnosis of dislocations are covered. Chapters 3 to 5 discuss the behavior of dislocations and explain how changes in the structure and arrangement of atoms can affect the behavior of dislocations. The three chapters also discuss the mechanical properties of dislocations. The remaining chapters offer a detailed discussion of the mechanisms of dislocations and the mechanical strength of crystalline solids. The book is written for undergraduate- and graduate-level students in both materials science and mechanical engineering. Non-experts and novices working on mechanical properties, mechanisms of deformation and fracture, and properties of materials, as well as industrial and academic researchers, will find this book invaluable.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 165
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

Temas relacionados