Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Engineering Materials 1

    An Introduction to Properties, Applications and Design
    • 4 Edición
    • David R.H. Jones + 1 más
    • Inglés
    Widely adopted around the world, Engineering Materials 1 is a core materials science and engineering text for third- and fourth-year undergraduate students; it provides a broad introduction to the mechanical and environmental properties of materials used in a wide range of engineering applications. The text is deliberately concise, with each chapter designed to cover the content of one lecture. As in previous editions, chapters are arranged in groups dealing with particular classes of properties, each group covering property definitions, measurement, underlying principles, and materials selection techniques. Every group concludes with a chapter of case studies that demonstrate practical engineering problems involving materials. Engineering Materials 1, Fourth Edition is perfect as a stand-alone text for a one-semester course in engineering materials or a first text with its companion Engineering Materials 2: An Introduction to Microstructures and Processing, in a two-semester course or sequence.

  • Amorphous Chalcogenides

    The Past, Present and Future
    • 1 Edición
    • Victor I. Mikla + 1 más
    • Inglés
    Amorphous chalcogenide semiconductors have commercial value and have many uses such as image formation, including x-rays, and high-definition TV pick up tubes. They have widespread application in the microelectronics industry and amorphous metallic alloys also have useful magnetic properties.This book focuses on their imaging applications and related properties. It examines the two groups of amorphous semiconductors that are of most commercial interest:1. the chalcogenide glasses2. the tetrahedrally bonded amorphous solids such as amorphous silicon, germanium and related alloysBoth of these groups may be conveniently prepared in the form of thin/thick films which is of considerable importance in applications where large-area coverage of flat or curved surfaces of rigid or flexible materials is desirable such as in photovoltaic arrays, X-Ray sensors, display screens and photocopier drums.

  • Advanced Reservoir Management and Engineering

    • 2 Edición
    • Tarek Ahmed + 1 más
    • Inglés
    Reservoir management is concerned with the geoscience and reservoir/production engineering required to plan and optimize the development of discovered or producing oil and gas assets. One of the only books to cover both management and engineering issues, Advanced Reservoir Management and Engineering is redesigned to be the only book you need throughout your career. Written by two of the industry's best-known and well respected reservoir engineers and managers, this new edition offers readers a complete guide for formulating workflow solutions on a day to day bases. Authoritative in its approach, the book begins with the theory and practice of transient flow analysis and offers a brief but thorough hands-on guide to gas and oil well testing. Chapter two documents water influx models and their practical applications in conducting comprehensive field studies, widely used throughout the industry. Essential topics such as Type-Curve Analysis, unconventional gas reservoirs, and gas hydrates are also covered. The book moves on to provide a clear exposition of key economic and financial management methods for evaluation criteria and cash flow analysis, analysis of fixed capital investments and advanced evaluation approaches. This is followed by a frank discussion of advanced evaluation approaches such as integration of decision analysis and professional ethics. Readers will find the website a valuable guide for enhancing their understanding of different techniques used for predicting reservoir performance and cost. The website will also include information such as properties, tables and simple calculations. This combination book and website arrangement will prove particularly useful to new professionals interested in increasing their skills or more experienced professional wishing to increase their knowledge of current industry best practices. The 2nd Edition of the book includes 3 new management chapters, representing a 30% increase over the previous edition. The new subjects include step by step approach to cash flow analysis, analysis of fixed capital investments, cash flow consequences, maintenance as well as a detailed approach to managing working capital. This is followed by a clear exposition of advanced evaluation approaches such as integration of decision analysis and economic evaluation and professional ethics.

  • Construction Calculations Manual

    • 1 Edición
    • Sidney M Levy
    • Inglés
    Construction Calculations is a manual that provides end users with a comprehensive guide for many of the formulas, mathematical vectors and conversion factors that are commonly encountered during the design and construction stages of a construction project. It offers readers detailed calculations, applications and examples needed in site work, cost estimation, piping and pipefitting, and project management. The book also serves as a refresher course for some of the formulas and concepts of geometry and trigonometry. The book is divided into sections that present the common components of construction. The first section of the books starts with a refresher discussion of unit and systems measurement; its origin and evolution; the standards of length, mass and capacity; terminology and tables; and notes of metric, U.S, and British units of measurements. The following concepts are presented and discussed throughout the book: Conversion tables and formulas, including the Metric Conversion Law and conversion factors for builders and design professionals Calculations and formulas of geometry, trigonometry and physics in construction Rudiments of excavation, classification, use of material, measurement and payment Soil classification and morphology, including its physicochemical properties Formulas and calculations needed for soil tests and evaluations and for the design of retaining structures Calculations relating to concrete and masonry Calculations of the size/weight of structural steel and other metals Mechanical properties of wood and processing of wood products Calculations relating to sound and thermal transmission Interior finishes, plumbing and HVAC calculations Electrical formulas and calculations Construction managers and engineers, architects, contractors, and beginners in engineering, architecture, and construction will find this practical guide useful for managing all aspects of construction.

  • Electrical Motor Products

    International Energy-Efficiency Standards and Testing Methods
    • 1 Edición
    • Jianfeng Yu + 2 más
    • Inglés
    Electrical motor products reviews the energy efficiency management laws for electrical motor products in United States, European Union (EU) and China. The energy efficiency certification requirements for the electrical motor products vary from country to country and are summarised here. International standards, testing methods and certification requirements for specific electrical motor products are discussed, including electric motors, pumps and fans. Finally, methods for improving energy efficiency are examined.

  • Rheology

    Concepts, Methods, and Applications
    • 2 Edición
    • Alexander Y. Malkin + 1 más
    • Inglés
    The pursuit of the golden balance between oversimplification and overload with theory has always been the primary goal of every author of book on rheology. Rheology: Concepts, Methods, and Applications, Second Edition is a tool for chemists and chemical engineers to solve many practical problems. They have to learn what to measure, how to measure, and what to do with the data. But, the learning process should not take users away from their major goals, such as manufacturing quality products, developing new materials, analysis of material durability. In the book various aspects of theoretical rheology as well as methods of measurement and raw data treatment and how to use rheological methods in different groups of products are discusses. The authors share their experiences of many years of experimental studies and teaching to show use of rheology in studies of materials. They and were very meticulous in giving historical background of contributors to rheology as a science and as the method of solving many practical problems. This book is very useful as a teaching tool in universities and colleges because it is consistent with programs of rheology courses. Practicality of this book will prepare students for typical tasks in industry. Equally it serves the industry and accomplished rheologists because it contains expert advice of two very famous and accomplished scientists and teachers who know discoveries first-hand because they may have taken part in some of them.

  • Specialist Yarn and Fabric Structures

    Developments and Applications
    • 1 Edición
    • R H Gong
    • Inglés
    Specialist yarn, woven and fabric structures are key elements in the manufacturing process of many different types of textiles with a variety of applications. This book explores a number of different specialist structures, discussing the developments in technology and manufacturing processes that have taken place in recent years.With its distinguished editor and international team of contributors, Specialist yarn, woven and fabric structures is essential reading for all textile researchers, technicians, engineers and technologies, and will also be suitable for academic purposes.

  • 7th International Conference on Compressors and their Systems 2011

    • 1 Edición
    • City University London in conjunction wi IMechE
    • Inglés
    This book contains the papers presented at the 7th International Conference on Compressors and their Systems at City University London in conjunction with the IMECHE. This conference is the ultimate global forum for reviewing the latest developments and novel approaches in compressor research. It features contributions from equipment manufacturers, suppliers, users and research organisations; these papers present developments in air, gas and refrigeration compressors; vacuum pumps; expanders; and related systems and components. Papers cover the design, development and operation of a wide range of compressors and expanders. Equipment manufacturers, suppliers, users and research organisations are all represented. Aspects covered include: present and future developments in scroll compressors; design and optimisation of screw compressors; latest thinking in oscillating and vane compressors; improving the function of valves; latest research in dynamic compressors; detailed analysis of reciprocating compressors; improved accuracy and usefulness of modelling techniques; developing better control of centrifugal compressors; and reducing unwanted noise and vibration.

  • PIC Microcontrollers

    An Introduction to Microelectronics
    • 3 Edición
    • Martin P. Bates
    • Inglés
    PIC Microcontrollers: An Introduction to Microelectronics, Third Edition, provides an introduction to the complex technology of microcontrollers. Starting with the standard PC, it establishes basic concepts and terminology: microprocessor systems, memory, input and output, and general digital systems ideas. It then examines the PIC microcontroller (MCU), which dominates the market for small-scale industrial applications. The analysis includes a chip that is no longer used commercially, with the minimum of advanced features: the PIC 16F84A; and the PIC 16F690, which has more features and is representative of more recent products in the PIC range. The discussions cover PIC architecture, programming techniques, PIC development systems, application design, program debugging, PIC motor applications, and microcontroller systems. Each chapter begins with an outline of contents and concludes with a set of questions for self-assessment or formal testing of students. This book was written for beginners, college or university students, or independent hobbyists.

  • Human Mental Workload

    • 1 Edición
    • Volumen 52
    • P.A. Hancock + 1 más
    • Inglés
    The purpose of this volume is to look at the developments and changes that have occurred in the area of mental workload and its assessment since the NATO symposium was held in 1979. This has been achieved by inviting prominent researchers to survey their respective areas of expertise.Examined are the current methodologies, individual differences, unanswered questions, and future directions for the mental workload issue. Particular topics discussed include the properties of workload assessment techniques, physiological measures, heart rate variability, effort and fatigue in relation to the workload experienced during normal daily routines, subjective assessment techniques, and the cognitive psychology of subjective workload. A preliminary proposal for a cohesive model of mental load is presented. A bibliographic listing of contemporary research reports completes the volume.

  • Measurement and Instrumentation

    Theory and Application
    • 1 Edición
    • Alan S. Morris + 1 más
    • Inglés
    Measurement and Instrumentation introduces undergraduate engineering students to the measurement principles and the range of sensors and instruments that are used for measuring physical variables. Based on Morris’s Measurement and Instrumentation Principles, this brand new text has been fully updated with coverage of the latest developments in such measurement technologies as smart sensors, intelligent instruments, microsensors, digital recorders and displays and interfaces. Clearly and comprehensively written, this textbook provides students with the knowledge and tools, including examples in LABVIEW, to design and build measurement systems for virtually any engineering application. The text features chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari, Professor of Mechanical Engineering at Texas A&M University.

  • Analog Circuit Design

    A Tutorial Guide to Applications and Solutions
    • 1 Edición
    • Bob Dobkin + 1 más
    • Inglés
    Analog circuit and system design today is more essential than ever before. With the growth of digital systems, wireless communications, complex industrial and automotive systems, designers are challenged to develop sophisticated analog solutions. This comprehensive source book of circuit design solutions will aid systems designers with elegant and practical design techniques that focus on common circuit design challenges. The book’s in-depth application examples provide insight into circuit design and application solutions that you can apply in today’s demanding designs.

  • Signals and Systems for Bioengineers

    A MATLAB-Based Introduction
    • 2 Edición
    • John Semmlow
    • Inglés
    Signals and Systems for Bioengineers, Second Edition, is the only textbook that relates important electrical engineering concepts to biomedical engineering and biological studies. It explains in detail the basic engineering concepts that underlie biomedical systems, medical devices, biocontrol, and biosignal analysis. It is perfect for the one-semester bioengineering course usually offered in conjunction with a laboratory on signals and measurements which presents the fundamentals of systems and signal analysis. The target course occupies a pivotal position in the bioengineering curriculum and will play a critical role in the future development of bioengineering students. This book provides increased coverage of time-domain signal analysis as well as biomeasurement, using examples in ultrasound and electrophysiology. It also presents new applications in biocontrol, with examples from physiological systems modeling such as the respiratory system. It contains double the number of Matlab and non-Matlab exercises to provide ample practice solving problems - by hand and with computational tools. More biomedical figures are found throughout the book. For instructors using this text in their course, an accompanying website (www.elsevierdirect.... in Semmlow page) includes support materials such as MATLAB data and functions needed to solve the problems, a few helpful routines, and all of the MATLAB examples. Intended readers include biomedical engineering students, practicing medical technicians, mechanical engineers, and electrical engineers.

  • Electrical Engineering 101

    Everything You Should Have Learned in School...but Probably Didn't
    • 3 Edición
    • Darren Ashby
    • Inglés
    Electrical Engineering 101 covers the basic theory and practice of electronics, starting by answering the question "What is electricity?" It goes on to explain the fundamental principles and components, relating them constantly to real-world examples. Sections on tools and troubleshooting give engineers deeper understanding and the know-how to create and maintain their own electronic design projects. Unlike other books that simply describe electronics and provide step-by-step build instructions, EE101 delves into how and why electricity and electronics work, giving the reader the tools to take their electronics education to the next level. It is written in a down-to-earth style and explains jargon, technical terms and schematics as they arise. The author builds a genuine understanding of the fundamentals and shows how they can be applied to a range of engineering problems. This third edition includes more real-world examples and a glossary of formulae. It contains new coverage of: Microcontrollers FPGAs Classes of components Memory (RAM, ROM, etc.) Surface mount High speed design Board layout Advanced digital electronics (e.g. processors) Transistor circuits and circuit design Op-amp and logic circuits Use of test equipment

  • PIC Projects for Non-Programmers

    • 1 Edición
    • John Iovine
    • Inglés
    John Iovine has created his next masterwork with PIC Projects for Non-Programmers. Engineers and hobbyists new to the PIC who want to create something today will find a valuable resource in this book. By working through the accessible projects in this book, readers will use a symbolic compiler that allows them to create ‘code’ via flowcharts immediately, getting their projects up and running quickly! The ability to create applications with the PIC from day one makes this a real page turner and a highly satisfying introduction to microcontrollers for both novices and readers who need to build their skills.

  • Overview of Industrial Process Automation

    • 1 Edición
    • K.L.S. Sharma
    • Inglés
    Man-made or industrial processes, localised or geographically distributed, need be automated in order to ensure they produce quality, consistent, and cost-effective goods or services. Automation systems for these processes broadly consist of instrumentation, control, human interface, and communication subsystems. This book introduces the basics of philosophy, technology, terminology, and practices of modern automation systems with simple illustrations and examples.

  • Game Theory and Learning for Wireless Networks

    Fundamentals and Applications
    • 1 Edición
    • Samson Lasaulce + 1 más
    • Inglés
    Written by leading experts in the field, Game Theory and Learning for Wireless Networks Covers how theory can be used to solve prevalent problems in wireless networks such as power control, resource allocation or medium access control. With the emphasis now on promoting ‘green’ solutions in the wireless field where power consumption is minimized, there is an added focus on developing network solutions that maximizes the use of the spectrum available. With the growth of distributed wireless networks such as Wi-Fi and the Internet; the push to develop ad hoc and cognitive networks has led to a considerable interest in applying game theory to wireless communication systems. Game Theory and Learning for Wireless Networks is the first comprehensive resource of its kind, and is ideal for wireless communications R&D engineers and graduate students. Samson Lasaulce is a senior CNRS researcher at the Laboratory of Signals and Systems (LSS) at Supélec, Gif-sur-Yvette, France. He is also a part-time professor in the Department of Physics at École Polytechnique, Palaiseau, France. Hamidou Tembine is a professor in the Department of Telecommunications at Supélec, Gif-sur-Yvette, France. Merouane Debbah is a professor at Supélec, Gif-sur-Yvette, France. He is the holder of the Alcatel-Lucent chair in flexible radio since 2007.

  • Groundwater Hydraulics

    • 1 Edición
    • Volumen 7
    • V. Hálek + 1 más
    • Inglés

  • Seepage Hydraulics

    • 1 Edición
    • Volumen 10
    • G. Kovács
    • Inglés

  • Metal Fatigue Analysis Handbook

    Practical Problem-solving Techniques for Computer-aided Engineering
    • 1 Edición
    • Yung-Li Lee + 2 más
    • Inglés
    Understand why fatigue happens and how to model, simulate, design and test for it with this practical, industry-focused reference Written to bridge the technology gap between academia and industry, the Metal Fatigue Analysis Handbook presents state-of-the-art fatigue theories and technologies alongside more commonly used practices, with working examples included to provide an informative, practical, complete toolkit of fatigue analysis. Prepared by an expert team with extensive industrial, research and professorial experience, the book will help you to understand: Critical factors that cause and affect fatigue in the materials and structures relating to your work Load and stress analysis in addition to fatigue damage—the latter being the sole focus of many books on the topic How to design with fatigue in mind to meet durability requirements How to model, simulate and test with different materials in different fatigue scenarios The importance and limitations of different models for cost effective and efficient testing Whilst the book focuses on theories commonly used in the automotive industry, it is also an ideal resource for engineers and analysts in other disciplines such as aerospace engineering, civil engineering, offshore engineering, and industrial engineering.

  • Introduction to Optimum Design

    • 3 Edición
    • Jasbir Singh Arora
    • Inglés
    Introduction to Optimum Design, Third Edition describes an organized approach to engineering design optimization in a rigorous yet simplified manner. It illustrates various concepts and procedures with simple examples and demonstrates their applicability to engineering design problems. Formulation of a design problem as an optimization problem is emphasized and illustrated throughout the text. Excel and MATLAB® are featured as learning and teaching aids.

  • Starting Electronics

    • 4 Edición
    • Keith Brindley
    • Inglés
    Starting Electronics is unrivalled as a highly practical introduction for technicians, non-electronic engineers, software engineers, students, and hobbyists. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter, and the use of readily available, inexpensive components makes this practical exploration of electronics easily accessible to all levels of engineer and hobbyist. Other books tell readers what to do, but sometimes fail to explain why – Brindley gives readers hands-on confidence in addition to real scientific knowledge, and insight into the principles as well as the practice. All written explanations and steps are supplemented with numerous photos, charts, tables and graphs. Concepts and practical aspects are explained thoroughly with mathematical formulae and technical schematic drawings. Each chapter introduces a concept or tool, explains the basic theory, and provides clear instructions for a simple experiment to apply the concept or tool, with quiz sections and answers, at the end of each chapter. New chapters on multimeters and soldering will be added, covering the fundamentals and experiments, with a basic parts list and an expanded and updated buyer’s guide.

  • Up and Running with AutoCAD 2012

    2D Drawing and Modeling
    • 1 Edición
    • Elliot J. Gindis
    • Inglés
    Get "Up and Running" with AutoCAD using Gindis’ combination of step-by-step instruction, examples, and insightful explanations. The emphasis from the beginning is on core concepts and practical application of AutoCAD in architecture, engineering and design. Equally useful in instructor-led classroom training or self-study, the book is written with the student in mind by a long-time AutoCAD user and instructor based on what works in the industry and the classroom.

  • Up and Running with AutoCAD 2012

    2D and 3D Drawing and Modeling
    • 2 Edición
    • Elliot J. Gindis
    • Inglés
    Gindis introduces AutoCAD with step by step instructions, stripping away complexities to begin working in AutoCAD immediately. All concepts are explained first in theory, and then shown in practice, helping the reader understand what it is they are doing and why, before they do it. Divided into three parts, the book covers beginning through advanced AutoCAD, including 3D features. Also included is an extensive Appendix for each part, detailing additional useful CAD-related information not often found in other text books.The book contains supporting graphics (screen shots) and a summary with a self-test section at the end of each chapter. Also included are drawing examples and exercises, and two running “projects” that the student works on as he/she progresses through the chapters.

  • Tailor Welded Blanks for Advanced Manufacturing

    • 1 Edición
    • B Kinsey + 1 más
    • Inglés
    Tailor welded blanks are metallic sheets made from different strengths, materials, and/or thicknesses pre-welded together before forming into the final component geometry. By combining various sheets into a welded blank, engineers are able to ‘tailor’ the blank so that the properties are located precisely where they are needed and cost-effective, low weight components are produced. Tailor welded blanks for advanced manufacturing examines the manufacturing of tailor welded blanks and explores their current and potential future applications.Part one investigates processing and modelling issues in tailor welded blank manufacturing. Chapters discuss weld integrity, deformation during forming and the analytical and numerical simulation modelling of tailor welded blanks for advanced manufacturing. Part two looks at the current and potential future applications of tailor welded blanks. Chapters review tailor welded blanks of lightweight metals and of advanced high-strength steel and finally discuss the uses of tailor-welded blanks in the automotive and aerospace industries.With its distinguished editors and international team of expert contributors, Tailor welded blanks for advanced manufacturing proves an invaluable resource for metal fabricators, product designers, welders, welding companies, suppliers of welding machinery and anyone working in industries that use advanced materials such as in automotive and aerospace engineering. Engineers and academics involved in manufacturing and metallurgy may also find this book a useful reference.

  • Concrete Portable Handbook

    • 1 Edición
    • R. Dodge Woodson
    • Inglés
    Whether or not, you are on the job site or back in the office, this book will help you to avoid mistakes, code violations, and wasted time and money. The book’s four part treatment begins with constituent materials followed by self contained parts on Concrete Properties, Processes, and Concrete Repair and Rehabilitation. Designed to be an "all in one" reference, the author includes a wealth information for the most popular types of testing. This includes: Analysis of Fresh Concrete; Testing Machines; Accelerated Testing Methods; Analysis of Hardened Concrete and Mortar; Core Sampling and Testing; Assessment of Concrete Construction ; Repair; Quality Concepts; Quality Control; Statistics; Standards, Specifications, and Codes of Practice. With this book in hand, construction engineers and even technicians find valuable information regarding Exposed Concrete Finishes, Repairing Concrete, Formwork, Precast Concrete, Concrete Roads, and Industrial Floors. Project managers and owners will find this reference a valuable guide to concrete both in terms of its applications in construction projects and the science and chemistry of concrete for its own sake.

  • Applied Plastics Engineering Handbook

    Processing and Materials
    • 1 Edición
    • Myer Kutz
    • Inglés
    A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them.

  • Advances in Imaging and Electron Physics

    Optics of Charged Particle Analyzers
    • 1 Edición
    • Volumen 168
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Fluid Mechanics

    • 5 Edición
    • Pijush K. Kundu + 2 más
    • Inglés
    Fluid mechanics, the study of how fluids behave and interact under various forces and in various applied situations—whether in the liquid or gaseous state or both—is introduced and comprehensively covered in this widely adopted text. Revised and updated by Dr. David Dowling, Fluid Mechanics, 5e is suitable for both a first or second course in fluid mechanics at the graduate or advanced undergraduate level.

  • Polymer Matrix Composites and Technology

    • 1 Edición
    • Ru-Min Wang + 2 más
    • Inglés
    Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials.

  • Collaborative Product Assembly Design and Assembly Planning

    Methodologies and Applications
    • 1 Edición
    • C. Lu + 2 más
    • Inglés
    Collaborative product assembly design and assembly planning presents several newly-developed methodologies and applications for collaborative assembly design and assembly planning, two important steps during the product development life cycle. These benefits include effective and rapid assembly design and assembly planning, thereby reducing the development cost and helping manufacturers enhance profit. With increased development in computer technologies and the Internet, the traditional assembly design and assembly planning have evolved around collaborative assembly design and assembly planning to speed up the product development process. Research in this area has attracted much attention in the past decade. Based on research work in the past few years, this book will present several newly-developed methodologies and applications for collaborative assembly design and assembly planning to improve the efficiency of product development in a collaborative design environment.

  • Engineering Rock Mass Classification

    Tunnelling, Foundations and Landslides
    • 1 Edición
    • R K Goel + 1 más
    • Inglés
    Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 167
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Matlab

    A Practical Introduction to Programming and Problem Solving
    • 2 Edición
    • Dorothy C. Attaway
    • Inglés
    MATLAB: A Practical Introduction to Programming and Problem Solving, Second Edition, is the only book that gives a full introduction to programming in MATLAB combined with an explanation of MATLAB’s powerful functions, enabling engineers to fully exploit the software’s power to solve engineering problems. The text aims to provide readers with the knowledge of the fundamentals of programming concepts and the skills and techniques needed for basic problem solving using MATLAB as the vehicle. The book presents programming concepts such as variables, assignments, input/output, and selection statements as well as MATLAB built-in functions side-by-side, giving students the ability to program efficiently and exploit the power of MATLAB to solve problems. In-depth coverage is given to input/output, a topic that is fundamental to many engineering applications. A systematic, step-by-step approach that builds on concepts is used throughout the book, facilitating easier learning. There are also sections on ‘common pitfalls’ and ‘programming guidelines’ that direct students towards best practice. This book will be an invaluable resource for engineers, engineering novices, and students learning to program and model in MATLAB.

  • Superplastic Forming of Advanced Metallic Materials

    Methods and Applications
    • 1 Edición
    • G Giuliano
    • Inglés
    Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process.Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys.With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering.Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error.

  • Adhesives Technology for Electronic Applications

    Materials, Processing, Reliability
    • 2 Edición
    • James J. Licari + 1 más
    • Inglés
    Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book particularly important for engineers and managers alike. The third edition has been updated throughout and includes new sections on nanomaterials, environmental impacts and new environmentally friendly ‘green’ adhesives. Information about regulations and compliance has been brought fully up-to-date. As well as providing full coverage of standard adhesive types, Licari explores the most recent developments in fields such as: • Tamper-proof adhesives for electronic security devices. • Bio-compatible adhesives for implantable medical devices. • Electrically conductive adhesives to replace toxic tin-lead solders in printed circuit assembly – as required by regulatory regimes, e.g. the EU’s Restriction of Hazardous Substances Directive or RoHS (compliance is required for all products placed on the European market). • Nano-fillers in adhesives, used to increase the thermal conductivity of current adhesives for cooling electronic devices.

  • Vacuum Deposition onto Webs, Films and Foils

    • 2 Edición
    • Charles Bishop
    • Inglés
    Roll-to-roll vacuum deposition is the technology that applies an even coating to a flexible material that can be held on a roll and provides a much faster and cheaper method of bulk coating than deposition onto single pieces or non-flexible surfaces, such as glass. This technology has been used in industrial-scale applications for some time, including a wide range of metalized packaging (e.g. snack packets). Its potential as a high-speed, scalable process has seen an increasing range of new products emerging that employ this cost-effective technology: solar energy products are moving from rigid panels onto flexible substrates, which are cheaper and more versatile in a similar way, electronic circuit ‘boards’ can be produced on a flexible polymer, creating a new range of ‘flexible electronics’ products flexible displays are another area of new technology in vacuum coating, with flexible display panels and light sources emerging Charles Bishop has written this book to meet the need he identified, as a trainer and consultant to the vacuum coatings industry, for a non-mathematical guide to the technologies, equipment, processes and applications of vacuum deposition. His book is aimed at a wide audience of engineers, technicians and production management. It also provides a guide to the subject for sectors in which vacuum deposition is a novel technology, such as solar energy and flexible electronics.

  • Reliability, Maintainability and Risk

    Practical Methods for Engineers including Reliability Centred Maintenance and Safety-Related Systems
    • 8 Edición
    • David J. Smith
    • Inglés
    Reliability, Maintainability and Risk: Practical Methods for Engineers, Eighth Edition, discusses tools and techniques for reliable and safe engineering, and for optimizing maintenance strategies. It emphasizes the importance of using reliability techniques to identify and eliminate potential failures early in the design cycle. The focus is on techniques known as RAMS (reliability, availability, maintainability, and safety-integrity). The book is organized into five parts. Part 1 on reliability parameters and costs traces the history of reliability and safety technology and presents a cost-effective approach to quality, reliability, and safety. Part 2 deals with the interpretation of failure rates, while Part 3 focuses on the prediction of reliability and risk. Part 4 discusses design and assurance techniques; review and testing techniques; reliability growth modeling; field data collection and feedback; predicting and demonstrating repair times; quantified reliability maintenance; and systematic failures. Part 5 deals with legal, management and safety issues, such as project management, product liability, and safety legislation.

  • Fire Fighting Pumping Systems at Industrial Facilities

    • 2 Edición
    • Dennis P. Nolan
    • Inglés
    Written from the perspective of industrial users, this is the only book that describes how to install an effective firewater pumping system in a pragmatic and budget-conscious way rather than with purely the regulatory framework in mind. Based on the wide-ranging industrial experience of the author, this book is also the only one that deals with the particular risks and requirements of off-shore facilities. This book takes the reader beyond the prescriptive requirements of the fire code (NFPA, UL) and considers how to make the best choice of design for the budget available as well as how to ensure the other components of the pumping system and supporting services are optimized.

  • Multidimensional Signal, Image, and Video Processing and Coding

    • 2 Edición
    • John W. Woods
    • Inglés
    Multidimensional Signal, Image, and Video Processing and Coding gives a concise introduction to both image and video processing, providing a balanced coverage between theory, applications and standards. It gives an introduction to both 2-D and 3-D signal processing theory, supported by an introduction to random processes and some essential results from information theory, providing the necessary foundation for a full understanding of the image and video processing concepts that follow. A significant new feature is the explanation of practical network coding methods for image and video transmission. There is also coverage of new approaches such as: super-resolution methods, non-local processing, and directional transforms. Multidimensional Signal, Image, and Video Processing and Coding also has on-line support that contains many short MATLAB programs that complement examples and exercises on multidimensional signal, image, and video processing. There are numerous short video clips showing applications in video processing and coding, plus a copy of the vidview video player for playing .yuv video files on a Windows PC and an illustration of the effect of packet loss on H.264/AVC coded bitstreams. New to this edition: New appendices on random processes, information theory New coverage of image analysis – edge detection, linking, clustering, and segmentation Expanded coverage on image sensing and perception, including color spaces Now summarizes the new MPEG coding standards: scalable video coding (SVC) and multiview video coding (MVC), in addition to coverage of H.264/AVC Updated video processing material including new example on scalable video coding and more material on object- and region-based video coding More on video coding for networks including practical network coding (PNC), highlighting the significant advantages of PNC for both video downloading and streaming New coverage of super-resolution methods for image and video

  • Computed Radiation Imaging

    Physics and Mathematics of Forward and Inverse Problems
    • 1 Edición
    • Esam M A Hussein
    • Inglés
    Computer-assisted imaging with radiation (x- and gamma rays) is an integral part of modern medical-diagnostic practice. This imaging technology is also slowly finding its way into industrial applications. Although the technology is well developed, there is a need for further improvement to enhance image quality, reduce artifacts, minimize patient radiation exposure, compete with and complement other imaging methods (such as magnetic resonance imaging and ultrasonics), and accommodate dense and large objects encountered in industrial applications.Scienti... and engineers, attempting to progress this technology, are faced with an enormous amount of literature, addressing the imaging problem from various view points. This book provides a single source that addresses both the physical and mathematical aspects of the imaging problem in a consistent and comprehensive manner.

  • Diesel Engine System Design

    • 1 Edición
    • Qianfan Xin
    • Inglés
    Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle.

  • Logistics Operations and Management

    Concepts and Models
    • 1 Edición
    • Reza Farahani + 2 más
    • Inglés
    This book provides a comprehensive overview of how to strategically manage the movement and storage of products or materials from any point in the manufacturing process to customer fulfillment. Topics covered include important tools for strategic decision making, transport, packaging, warehousing, retailing, customer services and future trends.

  • Advanced Adhesives in Electronics

    Materials, Properties and Applications
    • 1 Edición
    • M O Alam + 1 más
    • Inglés
    Adhesives for electronic applications serve important functional and structural purposes in electronic components and packaging, and have developed significantly over the last few decades. Advanced adhesives in electronics reviews recent developments in adhesive joining technology, processing and properties.The book opens with an introduction to adhesive joining technology for electronics. Part one goes on to cover different types of adhesive used in electronic systems, including thermally conductive adhesives, isotropic and anisotropic conductive adhesives and underfill adhesives for flip-chip applications. Part two focuses on the properties and processing of electronic adhesives, with chapters covering the structural integrity of metal-polymer adhesive interfaces, modelling techniques used to assess adhesive properties and adhesive technology for photonics.With its distinguished editors and international team of contributors, Advanced adhesives in electronics is a standard reference for materials scientists, engineers and chemists using adhesives in electronics, as well as those with an academic research interest in the field.

  • Minimization of Welding Distortion and Buckling

    Modelling and Implementation
    • 1 Edición
    • Pan Michaleris
    • Inglés
    Welding is a cost-effective and flexible method of fabricating large structures, but drawbacks such as residual stress, distortion and buckling must be overcome in order to optimize structural performance. Minimization of welding distortion and buckling provides a systematic overview of the methods of minimizing distortion and buckling in welded structures.Following an introductory chapter, part one focuses on understanding welding stress and distortion, with chapters on such topics as computational welding mechanics, modelling the effect of phase transformations on welding stress and distortion and using computationally efficient reduced-solution methods to understand welding distortion. Part two covers different methods of minimizing welding distortion. Chapters discuss methods such as differential heating for minimizing distortion in welded stiffeners, dynamic thermal tensioning, reverse-side heating and ways of minimizing buckling such as weld cooling and hybrid laser arc welding.With its distinguished editor and international team of contributors, Minimization of welding distortion and buckling is an essential reference for all welders and engineers involved in fabrication of metal end-products, as well as those in industry and academia with a research interest in the area.

  • Forsthoffer's Best Practice Handbook for Rotating Machinery

    • 1 Edición
    • William E. Forsthoffer
    • Inglés
    Optimize plant asset safety and reliability while minimizing operating costs with this invaluable guide to the engineering, operation and maintenance of rotating equipment Based upon his multi-volume Rotating Equipment Handbooks, Forsthoffer’s Best Practice Handbook for Rotating Machinery summarises, expands and updates the content from these previous books in a convenient all-in-one volume. Offering comprehensive technical coverage and insider information on best practices derived from lessons learned in the engineering, operation and maintenance of a wide array of rotating equipment, this new title presents: A unique "Best Practice" and "Lessons Learned" chapter framework, providing bite-sized, troubleshooting instruction on complex operation and maintenance issues across a wide array of industrial rotating machinery. Five chapters of completely new material combined with updated material from earlier volumes, making this the most comprehensive and up-to-date handbook for rotary equipment currently available. Intended for maintenance, engineering, operation and management, Forsthoffer’s Best Practice Handbook for Rotating Machinery is a one-stop resource, packed with a lifetime’s rotating machinery experience, to help you improve efficiency, safety, reliability and cost.

  • Experiment and Calculation of Reinforced Concrete at Elevated Temperatures

    • 1 Edición
    • Zhenhai Guo
    • Inglés
    Concrete as a construction material goes through both physical and chemical changes under extreme elevated temperatures. As one of the most widely used building materials, it is important that both engineers and architects are able to understand and predict its behavior in under extreme heat conditions. Brief and readable, this book provides the tools and techniques to properly analysis the effects of high temperature of reinforced concrete which will lead to more stable, safer structures. Based on years of the author’s research, Reinforced Concrete at Elevated Temperatures four part treatment starts with an unambiguous and thorough exposition of the mechanical behaviors of materials at elevated temperature followed by a discussion of Temperature field of member sections, Mechanical behaviors of members and structures at elevated temperature, ending with Theoretical analysis and practical calculation methods. The book provides unique insight into: Coupling thermal-mechanical constitutive relation of concrete Exceptional analyses of beams and columns of rectangular section with three surfaces and two adjacent surfaces exposing to high temperature Measurement and analysis of redistribution of internal forces of statically indeterminate structure during heating-loading process Finite element analysis and calculation charts for two-dimensional temperature field of structural members Finite element analysis and simplified calculation method for reinforced concrete structure at elevated temperature With this book, engineers and architects can effectively analyze the effect of high temperature on concrete and materials which will lead to better designs of fire resistant and damage evaluation and treatment after fire.

  • Building Materials in Civil Engineering

    • 1 Edición
    • Haimei Zhang
    • Inglés
    The construction of buildings and structures relies on having a thorough understanding of building materials. Without this knowledge it would not be possible to build safe, efficient and long-lasting buildings, structures and dwellings. Building materials in civil engineering provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries.The book begins with an introductory chapter describing the basic properties of building materials. Further chapters cover the basic properties of building materials, air hardening cement materials, cement, concrete, building mortar, wall and roof materials, construction steel, wood, waterproof materials, building plastics, heat-insulating materials and sound-absorbing materials and finishing materials. Each chapter includes a series of questions, allowing readers to test the knowledge they have gained. A detailed appendix gives information on the testing of building materials.With its distinguished editor and eminent editorial committee, Building materials in civil engineering is a standard introductory reference book on the complete range of building materials. It is aimed at students of civil engineering, construction engineering and allied courses including water supply and drainage engineering. It also serves as a source of essential background information for engineers and professionals in the civil engineering and construction sector.

  • Building Decorative Materials

    • 1 Edición
    • Yan Li + 1 más
    • Inglés
    Buildings should not only be functional but aesthetically pleasing. This requires the use of decorative materials both on the exterior and inside a building. Building decorative materials reviews the range of materials available and their potential applications.The book begins by considering the main types of decorative material and the physical, mechanical and other properties they require. It then discusses types and potential uses of decorative stone materials such as marble, granite, slate or gypsum. It then goes on to discuss the ways cement and concrete can be used for decorative effect, before considering the role of ceramics in such areas as tiling. The following chapters review decorative glass for windows or facades, metals and wood before assessing polymer materials such as plastics and textiles. The final group of chapters discuss coatings, including waterproofing materials, multi-functional materials used for such purposes as soundproofing and thermal insulation, and the use of more sustainable decorative materials.Building decorative materials is a useful reference for architects, civil engineers and those studying civil or structural engineering.

  • Vehicle thermal Management Systems Conference and Exhibition (VTMS10)

    • 1 Edición
    • Institution of Mechanical Engineers, SAE IMechE
    • Inglés
    This book contains the papers presented at the IMechE and SAE International, Vehicle Thermal Management Systems Conference (VTMS10), held at the Heritage Motor Centre, Gaydon, Warwickshire, 15-19th May 2011. VTMS10 is an international conference organised by the Automobile Division and the Combustion Engines and Fuels Group of the IMechE and SAE International. The event is aimed at anyone involved with vehicle heat transfer, members of the OEM, tier one suppliers, component and software suppliers, consultants, and academics interested in all areas of thermal energy management in vehicles. This vibrant conference, the tenth VTMS, addresses the latest analytical and development tools and techniques, with sessions on: alternative powertrain, emissions, engines, heat exchange/manufacture... heating, A/C, comfort, underhood, and external/internal component flows. It covers the latest in research and technological advances in the field of heat transfer, energy management, comfort and the efficient management of all thermal systems within the vehicle.

Temas relacionados