Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Extrusion

    The Definitive Processing Guide and Handbook
    • 2 Edición
    • Harold F. Giles Jr + 2 más
    • Inglés
    The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety.

  • System Requirements Analysis

    • 2 Edición
    • Jeffrey O. Grady
    • Inglés
    System Requirements Analysis gives the professional systems engineer the tools to set up a proper and effective analysis of the resources, schedules and parts needed to successfully undertake and complete any large, complex project. This fully revised text offers readers the methods for rationally breaking down a large project into a series of stepwise questions, enabling you to determine a schedule, establish what needs to be procured, how it should be obtained, and what the likely costs in dollars, manpower, and equipment will be to complete the project at hand. System Requirements Analysis is compatible with the full range of popular engineering management tools, from project management to competitive engineering to Six Sigma, and will ensure that a project gets off to a good start before it's too late to make critical planning changes. The book can be used for either self-instruction or in the classroom, offering a wealth of detail about the advantages of requirements analysis to the individual reader or the student group.

  • Applied Nanotechnology

    The Conversion of Research Results to Products
    • 2 Edición
    • Jeremy Ramsden
    • Inglés
    Applied Nanotechnology takes an integrated approach to the scientific, commercial and social aspects of nanotechnology, exploring: The relationship between nanotechnology and innovation The changing economics and business models required to commercialize innovations in nanotechnology Product design case studies Applications in various sectors, including information technology, composite materials, energy, and agriculture The role of government in promoting nanotechnology The potential future of molecular self-assembly in industrial production In this 2e, new chapters have been added on energy applications and the role of nanotechnology in sustainability. The section on the safety of nanoproducts has also been updated, and material on funding and commercialization has been updated and expanded, with new case studies illustrating the experience of new startups in a challenging economic environment.

  • Interfacing PIC Microcontrollers

    Embedded Design by Interactive Simulation
    • 2 Edición
    • Martin P. Bates
    • Inglés
    Interfacing PIC Microcontrollers, 2nd Edition is a great introductory text for those starting out in this field and as a source reference for more experienced engineers. Martin Bates has drawn upon 20 years of experience of teaching microprocessor systems to produce a book containing an excellent balance of theory and practice with numerous working examples throughout. It provides comprehensive coverage of basic microcontroller system interfacing using the latest interactive software, Proteus VSM, which allows real-time simulation of microcontroller based designs and supports the development of new applications from initial concept to final testing and deployment.

  • Pipeline Integrity Handbook

    Risk Management and Evaluation
    • 1 Edición
    • Ramesh Singh
    • Inglés
    Based on over 40 years of experience in the field, Ramesh Singh goes beyond corrosion control, providing techniques for addressing present and future integrity issues. Pipeline Integrity Handbook provides pipeline engineers with the tools to evaluate and inspect pipelines, safeguard the life cycle of their pipeline asset and ensure that they are optimizing delivery and capability. Presented in easy-to-use, step-by-step order, Pipeline Integrity Handbook is a quick reference for day-to-day use in identifying key pipeline degradation mechanisms and threats to pipeline integrity. The book begins with an overview of pipeline risk management and engineering assessment, including data collection and regulatory approaches to liquid pipeline risk management. Other critical integrity issues include: Pipeline defects and corrective actions Introduction to various essential pipeline material such as line pipes and valves Coverage on corrosion and corrosion protection

  • Experiments

    • 1 Edición
    • Antonio Casale + 1 más
    • Inglés
    Polymer Stress Reactions, Volume 2: Experiments provides an overall world perspective for the field of polymer reactions caused by stress. For the reader's benefit the book is developed along several lines for ease of reference. The same studies may thus be discussed from different points of view such as type of equipment, polymer used, basic parameters, and the polymer state. Presentation by polymer state is a fundamental, i.e., a molecular approach to mechanochemistry. The discussion of each nominal polymer state includes a description of those parameters and variables which are germane to the mechanically induced reactions in that state. In contrast, the variables which are generally applicable to mechanochemistry, such as temperature and shear intensity, are subsequently treated individually. The present volume contains two main chapters. The first reviews the principal experiments on each of the most researched polymers, both natural and synthetic; the second discusses studies of the polymer state in mechanochemistry.

  • Strength and Failure of Visco-Elastic Materials

    • 1 Edición
    • G. M. Bartenev + 1 más
    • Inglés
    Strength and Failure of Visco-Elastic Materials covers the whole spectrum of durability of visco-elastic materials. The title details the contemporary state of the problems and the results of the studies done in the area of visco-elastic materials science. The text covers materials such as polymers, rubbers, and elastomers. The selection tackles visco-elastic problems, such as kinetic failures, corrosion, static fatigue, and deformation. Variables such as molecular weight and orientation, structure, environments, strain rate, and action are also discussed. The book will be of great use to students, researchers, and practitioners of materials science.

  • Bioengineering

    Proceedings of Eighth Northeast Conference
    • 1 Edición
    • Igor Paul
    • Inglés
    Bioengineering: Proceedings of the Eighth Northeast Conference focuses on the discussion of scientific programs, methodologies, experiments, and contributions to the advancement of bioengineering, such as in the field of medicine. The book is composed of literature of various authors who have worked diligently in the field of bioengineering. The text starts by discussing the conditions, situations, and experiments on how the human bones and other internal organs react if subjected to stress, fatigue, and other factors. The properties, composition, and reactions of these body parts to different conditions are discussed. Experiments on regional tissue blood flow through hydrogen clearance and on minimizing the effect of gas trapping on static pressure-volume curves of excised lungs are also presented. The book also notes the instrumentation and control systems for clinical vestibular and cardiovascular stress testing. A large part of the selection deals with research on different internal body parts when subjected to different conditions. Supporting these discussions are control measures, findings, suggestions, methodologies, numerical representations, and recommendations. The book is valuable to scholars, researchers, and readers who are interested in the field of bioengineering.

  • Fluid Mixing II

    A Symposium Organised by the Yorkshire Branch and the Fluid Mixing Processes Subject Group of the Institution of Chemical Engineers and Held at Bradford University, 3-5 April 1984
    • 1 Edición
    • M.F. Edwards + 2 más
    • Inglés
    Fluid Mixing II documents the proceedings of a symposium organized by the Yorkshire Branch and the Fluid Mixing Processes Subject Group of the Institution of Chemical Engineers and held at Bradford University, on 3-5 April 1984. The conference covers all aspects of mixing including the assessment of mixture quality, experimental and theoretical studies of mixing, chemical reaction and mass transfer, heat transfer, novel experimental techniques, scale-up and optimization. This volume contains 12 papers that deal with topics such as drawdown of floating solids into mechanically agitated vessels; effects of water/cement ratio, intensity of mixing, age and cement particle size and shape upon rheological properties of cement grouts with and without admixture; and mixing of non-absorbent solids with liquids. Other studies cover the flooding transition of a Rushton turbine operating in a gas-liquid system; power consumption in a three phase (liquid-solid-gas) mixing process in a stirred vessel; and an experimental technique for studying the rate of inter-zone mixing.

  • Modern Physical Metallurgy

    • 3 Edición
    • R. E. Smallman
    • Inglés
    Modern Physical Metallurgy, Third Edition discusses the fundamental principles of physical metallurgy and demonstrates how the application of the principles leads to a clearer understanding of many technologically important metallurgical phenomena. This book covers the substantial developments in the microstructural examination of metals using X-ray microanalysis, strengthening of metals, and surface and interface behavior. Numerical problems on crystallography, constitution and microstructure, diffraction, diffusion, defect theory, and thermodynamics are also provided in this publication. This edition is useful for all undergraduate degree courses in metallurgy and materials in both universities and polytechnics. The large range of topics included, from superconductivity to superplasticity and from macroscopic plasticity to fracture toughness, gives students sufficient background to the fundamental principles and practical details for examination requirements.

  • A Handbook of Lattice Spacings and Structures of Metals and Alloys

    International Series of Monographs on Metal Physics and Physical Metallurgy, Vol. 4
    • 1 Edición
    • W. B. Pearson
    • G. V. Raynor
    • Inglés
    A Handbook of Lattice Spacing and Structures of Metals and Alloys is a 12-chapter handbook that describes the structures and lattice spacings of all binary and ternary alloys. This book starts with an introduction to the accurate determination of structure and lattice spacings. The subsequent chapters deal with the role of structure determination and lattice spacings in alloy formation, as well as the application of this determination to the equilibrium diagram examination. These topics are followed by discussions on the correlation of lattice spacing and magnetic property, including X-ray crystallographic data for those structures allotted a “Strukturbericht” type. The remaining chapters contain table lists information about the crystal structures, densities, and expansion coefficients of the elements. These chapters also present further information about lattice spacing and structure determination on metals in alphabetical order. This book is of value to physicists and metallurgists.

  • Adhesives Handbook

    • 3 Edición
    • J. Shields
    • Inglés
    Adhesives handbook, Third edition is a guidebook that covers the basic concepts of adhesive bonding process. The book emphasizes products based on advance synthetic polymers. The coverage of the text includes design of the adhesive joint; surface preparation of bonding materials; selection of a suitable adhesive; and the specification of processing and testing techniques. The book will be of great use to design engineers and technicians involved in the materials bonding process in their respective works.

  • Project Management, Planning and Control

    Managing Engineering, Construction and Manufacturing Projects to PMI, APM and BSI Standards
    • 6 Edición
    • Albert Lester
    • Inglés
    Covering the principles and techniques you need to successfully manage an engineering or technical project from start to finish, Project Management, Planning and Control is an established and widely recommended project management handbook. With clear and detailed coverage of planning, scheduling and control, which can pose particular challenges in engineering environments, this sixth edition includes new chapters on Agile project management and project governance, more real-life examples and updated software information. Ideal for those studying for Project Management Professional (PMP) qualifications, Project Management, Planning and Control is aligned with the latest Project Management Body of Knowledge (PMBOK) for both the Project Management Institute (PMI) and the Association of Project Management (APM), and includes questions and answers to help you test your understanding. It is also updated to match the latest BS 6079 standard for project management in construction.

  • Engineering Tribology

    • 4 Edición
    • Gwidon Stachowiak + 1 más
    • Inglés
    Engineering Tribology, Fourth Edition is an established introductory reference focusing on the key concepts and engineering implications of tribology. Taking an interdisciplinary view, the book brings together the relevant knowledge from different fields needed to achieve effective analysis and control of friction and wear. Updated to cover recent advances in tribology, this new edition includes new sections on ionic and mesogenic lubricants, surface texturing, and multiscale characterization of 3D surfaces and coatings. Current trends in nanotribology are discussed, such as those relating to lubricants, coatings and composites, and geotribology is introduced. Suitable as an introductory text, a refresher or an on-the-job reference, Engineering Tribology, 4th Edition is intended for final year undergraduate and postgraduate students in mechanical engineering as well as professional engineers. It is also relevant to those working in materials engineering, applied chemistry, physics and bioengineering.

  • Fluid Dynamics of Oil Production

    • 1 Edición
    • Bakytzhan Zhumagulov + 1 más
    • Inglés
    Fluid Dynamics of Oil Production is the perfect guide for understanding and building more accurate oil production models. It is dedicated to the theoretical and numerical study of fluid dynamic models, and much attention is paid to the analysis of the results of the hydrodynamic calculations based on these models and their use in the predictive estimates of the regulatory process of oil production. Other items include: A careful description of over 30 different mathematical models of oil formations Unconventional scenarios, such as models describing the process of foaming in oil formations and the combination of reservoir flow with liquid flow in wells. Coverage of more complex and multi-dimensional models, including oil filtration results and methods

  • Metal Hydrides

    • 1 Edición
    • William M. Mueller + 2 más
    • Inglés
    Metal Hydrides focuses on the theories of hydride formation as well as on experimental procedures involved in the formation of hydrides, the reactions that occur between hydrides and other media, and the physical and mechanical properties of the several classes of hydrides. The use of metal hydrides in the control of neutron energies is discussed, as are many other immediate or potential uses, e.g., in the production of high-purity hydrogen and in powder metallurgy. It is hoped that this book will serve as a valuable reference to students, research professors, and industrial researchers in metal hydrides and in allied fields. Selected chapters may serve specialists in other fields as an introduction to metal hydrides. The information contained herein will also be of lasting and practical value to the metallurgist, inorganic chemist, solid-state physicist, nuclear engineer, and others working with chemical or physical processes involving metal-hydrogen systems.

  • Finite Element Techniques for Fluid Flow

    • 1 Edición
    • J. J. Connor + 1 más
    • Inglés
    Finite Element Techniques for Fluid Flow describes the advances in the applications of finite element techniques to fluid mechanics. Topics covered range from weighted residual and variational methods to interpolation functions, inviscid fluids, and flow through porous media. The basic principles and governing equations of fluid mechanics as well as problems related to dispersion and shallow water circulation are also discussed. This text is comprised of nine chapters; the first of which explains some basic definitions and properties as well as the basic principles of weighted residual and variational methods. The reader is then introduced to the simple finite element concepts and models, and gradually to more complex applications. The chapters that follow focus on the governing equations of fluid flow, the solutions to potential type problems, and viscous flow problems in porous media. The solutions to more specialized problems are also presented. This book also considers how circulation problems can be tackled using finite elements, presents a solution to the mass transfer equation, and concludes with an explanation of how to solve general transient incompressible flows. This source will be of use to engineers, applied mathematicians, physicists, self-taught students, and research workers.

  • Integrated Project Control

    State of the Art Reports 1987 Series
    • 1 Edición
    • A D Berry + 1 más
    • Inglés
    Integrated Project Control deals with project management standards as an integrated part of a framework of standards covering the total information technology (IT) life-cycle. Various aspects of integrated project control are examined, with emphasis on the IT projects of commercial organizations. Comprised of three parts, this book begins by discussing the overall corporate IT management framework and project management of development/procurem... projects. It describes a ""model"" or ""logical"" framework that addresses the management requirements of all stages of the IT life-cycle as well as the direction, control, and coordination across the life-cycle. It considers the role of project management within the overall framework that can be used as a model for the future against which any company can assess its performance. The chapters explore the quantification of risk in aiding management decisions; organizational issues in project management; cost-effective control procedures for project management; and the management implications of prototyping and new generation languages. Some important aspects of project management, including quality assurance and technical issues, are also analyzed. This monograph will be a valuable resource for directors and managers of IT.

  • Plastics in Building Structures

    Proceedings of a Conference Held in London, 14-16 June 1965
    • 1 Edición
    • D. S. Mahon + 2 más
    • Inglés
    Plastics in Building Structures covers the proceedings of a conference, held in London on June 14-16, 1965. This conference focuses on the applications of plastics materials in structures. This book emerged from 39 papers presented at the conference. The introductory papers describe the properties of plastics in relation to building structures, and the economic aspects, fire regulations, and flammability of these materials. Considerable papers are devoted to various areas of application of plastics, including adhesives, polymer cements, cored chipboard units, and glued timber. These topics are followed by discussions on the characterization, design, and structural and physical properties of plastics. The final chapters review the commercial development and applications of plastic materials. This book will prove useful to engineers, designer, manufacturers, and researchers in the allied fields.

  • The Role of Patent Information in the Transfer of Technology

    Proceedings of the International Conference held at Varna, Bulgaria, May 27-30, 1980
    • 1 Edición
    • F.A. Sviridov
    • Inglés
    The Role of Patent Information in the Transfer of Technology is a compendium of papers presented at the International Symposium on The Role of Patent Information in the Transfer of Technology. The symposium is organized by the State Committee for Science and Technological Progress of the People's Republic of Bulgaria, in cooperation with the World Intellectual Property Organization. The collection is composed of papers written by the delegates of the symposium that seek to highlight the usefulness of patent information in the transfer of technology. The focus is to find ways and means to facilitate the transfer of technology, primarily from the industrialized countries to the developing countries. The text emphasized that such an undertaking has the potential for global industrial, technological, scientific, and economic development. The book is essentially devoted to the exposition of two main points; the role and importance of patent information and technology transfer in industrialized nations; socialist states and developing countries and patent documentation and information dissemination. Inventors, scientists, economists, industrialists, engineers, market analysts, and students will find this text interesting.

  • Infrared and Millimeter Waves V16

    Electromagnetic Waves in Matter, Part III
    • 1 Edición
    • Kenneth J. Button
    • Inglés
    Infrared and Millimeter Waves, Volume 16: Electromagnetic Waves in Matter, Part III deals with electromagnetic devices based on infrared and millimeter waves. This book covers infrared optoacoustics; freestanding fine-wire grids for use in millimeter- and submillimeter-wave spectroscopy; and population inversion and far-infrared (FIR) emission of hot electrons in semiconductors. The theory on distributed feedback lasers with weak and strong modulations is also considered. This monograph is comprised of six chapters and begins with a discussion on the optoacoustic effect in the infrared, with emphasis on where optoacoustics and infrared physics combine in the areas of Fourier spectroscopy, optically pumped FIR lasers, and photothermal non-destructive remote material evaluation. The next chapter presents the basic principles of the theory on distributed feedback lasers with weak and strong modulations, together with results of analytical and numerical calculations. The following chapters focus on the construction of freestanding fine-wire grids for use in millimeter- and submillimeter-wave spectroscopy; general equations for the mean distance between impurity ions in solid-state devices, signal vectors in communication theory, and stars in the solar neighborhood; and prospects for hot-carrier systems in active FIR solid-state devices. The final chapter is devoted to quenched germanium and its FIR optical properties. This text will be a valuable resource for physicists and electronics and electrical engineers.

  • List of Standard Abbreviations (Symbols) for Synthetic Polymers and Polymer Materials 1974

    International Union of Pure and Applied Chemistry: Macromolecular Division Commission on Macromolecular Nomenclature
    • 1 Edición
    • Sam Stuart
    • Inglés
    List of Standard Abbreviations (Symbols) For Synthetic Polymers and Polymer Materials 1974 provides a standardized abbreviation of the various synthetic polymers and polymer materials. The text also provides the basic definitions of various terms related to polymers. The book will be of great use to researchers and professionals whose work involves polymers and other synthetic materials.

  • Second International Conference on Chemical Engineering Education

    A Three-Day Symposium Organised by the Institution of Chemical Engineers on Behalf of the European Federation of Chemical Engineers, Co-Sponsored by the American Institute of Chemical Engineers and the Society of Chemical Engineers, Japan, and Held at Rob
    • 1 Edición
    • D.C. Freshwater + 2 más
    • Inglés
    Second International Conference on Chemical Engineering Education presents the situation in chemical engineering education in Germany, Hungary, Spain, Japan, and in the United States. This book depicts an awareness of the problems of professional education together with a wide spectrum of opinions on their solution. Organized into 39 chapters, this book begins with an overview of the actual situation of chemical engineering education program in Spain. This text then examines the detailed formalities of chemical engineering in secondary schools. Other chapters consider the change in chemical engineering education in Japan due to the change of chemical industries as well as by a great change of students' attitude. This book discusses as well the curriculum proposal for the education of undergraduate and graduate levels as well as foreign students' education. The final chapter reviews the European situation of chemical engineering education system. This book is a valuable resource for teachers and students of chemical engineering.

  • Drug Abuse in the Modern World

    A Perspective for the Eighties
    • 2 Edición
    • Gabriel G. Nahas + 1 más
    • Inglés
    Drug Abuse in the Modern World: A Perspective for the Eighties is a compilation of research papers presented at an international symposium, held at the College of Physicians and Surgeons of Columbia University. The focus of the conference is the assessment of the effects of addictive drugs on an individual, both in mind and body, and the repercussions of its widespread use on society, specifically during the decade of the 80’s. The book is composed of 49 chapters, which were divided into five parts. The first part presents the pharmacological properties of addictive drugs; its effect on brain functions; and changes in the user’s behavior leading to physical and psychic dependence, which when left unmitigated may cause neurological disorders. A paper on pharmacological cure, specifically for tobacco and alcohol abuse, is presented, as well as the effects of marijuana on the reproductive system. The second part examines drug use among children, family relationships, and drug abuse in adults engaged in various professions and undertakings. The third part exposes how a ""pro-drug"" media can be instrumental in the proliferation of drug use in society and also how religion may have also propagated drug use. In contrast, several articles are likewise written that extols the use of media in spreading the detrimental effects of drugs. Part 4 discusses the state of drug abuse in different cultures and societies; the drug trade; and various interventions being implemented by local governments and international organizations to curb the spread of this epidemic. Part 5 is devoted to the status of drug abuse in the 80’s, efforts made, and plans to fight it. The text is a must-read for physicians, pharmacists, educators, social workers, lawyers, law enforcers, sociologists, students, and people who want to get rid of this menace to the human race.

  • Basic Fluid Mechanics

    • 1 Edición
    • J J Sharp
    • Inglés
    BASIC Fluid Mechanics combines the application of BASIC programming with fluid mechanics. Topics covered in this book include the fundamentals of the BASIC computer language, properties of fluids, fluid statics, kinematics, and conservation of energy. Force and momentum, viscous flow, flow measurement, and dimensional analysis and similarity are also considered. This book is comprised of nine chapters and begins with a brief introduction to the application of BASIC. The discussion then turns to the various properties of a fluid and the differences between fluids and solids. The chapters that follow explore fluid statics, kinematics, and conservation of energy. The Euler and Bernoulli equations that are used to express the principle of conservation of energy when applied to fluids are highlighted, and calculations for force and momentum are presented. The text also considers laminar flow between parallel plates and in circular tubes, as well as the techniques for measuring flow. The final chapter describes the principles of dimensional analysis and similarity methods. Worked examples developing programs for the solution of typical problems are provided at the end of each chapter. This monograph will be useful to students in an undergraduate program and practicing engineers who are attempting to get to grips with modern computational procedures.

  • The Recycling and Disposal of Solid Waste

    Proceedings of a Course Organised by the Department of Metallurgy and Materials Science, University of Nottingham, 1st - 5th April, 1974
    • 1 Edición
    • Michael E. Henstock
    • Inglés
    The Recycling and Disposal of Solid Waste contains the proceedings of a course held at The University of Nottingham on April 1-5, 1974. This book contains 16 papers separated as chapters. Topics include economic potential of waste recycling; bulk reduction by incineration, hydrolysis and pyrolysis; organic wastes; glass recycling; legal aspects of solid waste disposal; the sorting of solid waste into useful fractions; and ferrous metals recycling. This text also describes the tipping and sanitary landfill; textiles recycling; polymers recycling; new materials created from waste; and toxic and radioactive solid wastes. Air pollution from solid waste disposal; non-ferrous metals recycling; and the plating and ECM sludges as raw materials are also presented.

  • Design Principles of Metal-Cutting Machine Tools

    • 1 Edición
    • F. Koenigsberger
    • Inglés
    Design Principles of Metal-Cutting Machine Tools discusses the fundamentals aspects of machine tool design. The book covers the design consideration of metal-cutting machine, such as static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. The text first details the data calculation and the general requirements of the machine tool. Next, the book discusses the design principles, which include stiffness and rigidity of the separate constructional elements and their combined behavior under load, as well as electrical, mechanical, and hydraulic drives for the operational movements. The next section deals with automatic control, including its principles, constructional elements, and applications. The last section tackles the design of constructional elements, such as machine tool structures, spindles and spindle bearings, and control and operating devices. The book will be of great use to mechanical and manufacturing engineers. Individuals involved in materials manufacturing industry will also benefit from the book.

  • Advances in Energy Systems and Technology

    Volume 1
    • 1 Edición
    • Peter Auer
    • Inglés
    Advances in Energy Systems and Technology present the first volume of articles that provides a critical review of specific topics within the general field of energy. It discusses the technological issues in a broader systems context. It addresses the technical factors underlying energy developments. Some of the topics covered in the book are the introduction and development of wind power, the production of fuels from biomass, biomass conversion, aerodynamics, sources of biomass, and the technologies used to obtain energy from biomass. The analysis of the ethanol fermentation is covered. The process of pyrolysis is discussed. The text describes the anaerobic digestion of organic substrates. The alcohol production from sugar cane is presented. A chapter is devoted to the fuel production from pyrolysis of wastes. Another section focuses on the conversion of forest products to electric power and generation of geothermal energy. The book can provide useful information to scientists, engineers, students, and researchers.

  • Extractive Metallurgy of Copper

    International Series on Materials Science and Technology
    • 2 Edición
    • A. K. Biswas + 1 más
    • D. W. Hopkins
    • Inglés
    Extractive Metallurgy of Copper details the process of extracting copper from its ore. The book also discusses the significance of each process, along with the concerns in each process, such as pollution, energy demand, and cost. The text first provides an overview of the metallurgical process of copper extraction, and then proceeds to presenting the step-by-step representation of the whole process of copper extraction. The coverage of the book includes mineral beneficiation, roasting, smelting, converting, refining, casting, and quality control. The text will be of great use to metallurgists, materials engineers, and other professionals involved in mining industry.

  • High Temperature Metallography

    • 1 Edición
    • M. G. Lozinskii
    • Inglés
    High Temperature Metallography focuses on the reactions, processes, methodologies, and approaches involved in high temperature metallography. The publication first offers information on the basic principles of high temperature vacuum metallography, including the methods of heating test specimens in vacuo to high temperatures; specimens for investigating structure and properties of metals by heating in vacuo; and methods of regulating and controlling the temperature of specimens heated in vacuo. The text then ponders on vacuum systems in equipment for investigating the structure and properties of metals and alloys heated at low ultimate pressures, as well as gas flow through the tubes during evacuation; construction and characteristics of vacuum pumps used for high temperature metallography equipment; and approximate calculation of parameters of vacuum systems for equipment intended for investigating metals during heating in a vacuum. The book takes a look at equipment and instruments for investigating metals heated in a vacuum; method of investigation by studying microstructures and properties of metals and alloys while heated in vacuo; and methods for measuring elasticity, internal friction, and hardness, and for investigating the deformation of metals and alloys at high temperatures in vacuo. The text is a dependable reference for readers interested in high temperature metallography.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 180
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Academic Press Library in Signal Processing

    Signal Processing Theory and Machine Learning
    • 1 Edición
    • Volumen 1
    • Sergios Theodoridis + 4 más
    • Inglés
    This first volume, edited and authored by world leading experts, gives a review of the principles, methods and techniques of important and emerging research topics and technologies in machine learning and advanced signal processing theory. With this reference source you will: Quickly grasp a new area of research Understand the underlying principles of a topic and its application Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved

  • 8th International Conference on Compressors and their Systems

    • 1 Edición
    • City University London
    • Inglés
    This book contains the papers from the 2013 International Conference on Compressors and Their Systems, held from 9-10 September at City University London. The long-running conference series is the ultimate global forum for reviewing the latest developments and novel approaches in compressor research. High-quality technical papers are sourced from around the globe, covering technology development, operation, maintenance and reliability, safety and environmental impact, energy efficiency and carbon footprint, system integration and behaviour, upgrades and refurbishment, design and manufacture, education and professional development. All the papers are previously unpublished and constitute leading edge research.

  • Academic Press Library in Signal Processing

    Communications and Radar Signal Processing
    • 1 Edición
    • Volumen 2
    • Sergios Theodoridis + 3 más
    • Inglés
    This second volume, edited and authored by world leading experts, gives a review of the principles, methods and techniques of important and emerging research topics and technologies in communications and radar engineering. With this reference source you will: Quickly grasp a new area of research Understand the underlying principles of a topic and its application Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved

  • Academic Press Library in Signal Processing

    Image, Video Processing and Analysis, Hardware, Audio, Acoustic and Speech Processing
    • 1 Edición
    • Volumen 4
    • Sergios Theodoridis + 1 más
    • Inglés
    This fourth volume, edited and authored by world leading experts, gives a review of the principles, methods and techniques of important and emerging research topics and technologies in Image, Video Processing and Analysis, Hardware, Audio, Acoustic and Speech Processing. With this reference source you will: Quickly grasp a new area of research Understand the underlying principles of a topic and its application Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved

  • Finite Element Analysis and Design of Metal Structures

    • 1 Edición
    • Ehab Ellobody + 2 más
    • Inglés
    Traditionally, engineers have used laboratory testing to investigate the behavior of metal structures and systems. These numerical models must be carefully developed, calibrated and validated against the available physical test results. They are commonly complex and very expensive. From concept to assembly, Finite Element Analysis and Design of Metal Structures provides civil and structural engineers with the concepts and procedures needed to build accurate numerical models without using expensive laboratory testing methods. Professionals and researchers will find Finite Element Analysis and Design of Metal Structures a valuable guide to finite elements in terms of its applications.

  • Plane-Strain Slip-Line Fields for Metal-Deformation Processes

    A Source Book and Bibliography
    • 1 Edición
    • W. Johnson + 2 más
    • Inglés
    Plane-Strain Slip-Line Fields for Metal-Deformation Processes: A Source Book and Bibliography provides information pertinent to the theory and application of plain-train slip fields to metal-working problems. This book discusses the industrial importance of axial symmetry. Organized into seven chapters, this book begins with an overview of the oldest processes of metal forming, including forging, coining, hammering, drifting, cutting, or parting. This text then examines the basic aspects of the basic theory of classical plasticity. Other chapters consider the governing equations of the plane plastic flow of a rigid-perfectly plastic solid. This book discusses as well the methods for the solution of problems of plane plastic flow of a rigid-perfectly plastic solid. The final chapter deals with the application of the theory of plasticity to the quasi-static plane-strain deformation of an isotropic rigid-perfectly plastic, rate insensitive material. This book is a valuable resource for mechanical engineers, materials scientists, teachers, and research workers.

  • Additives for Plastics

    New Developments
    • 1 Edición
    • Raymond B. Seymour
    • Inglés
    Additives for Plastics, Volume 2, New Developments contains papers presented at the Symposium on Additives for Plastics, sponsored by the Organic Coatings and Plastics Division, American Chemical Society, and held in Anaheim, California, spring 1978. The volume opens with a chapter on developments in fillers for plastics. This is followed by separate chapters on the principles of micro packing; commercially available glass fillers; the use of precipitated silicas in ethylene-vinyl acetate copolymers to provide a versatile class of materials for many applications; and advancements in plasticizers. Subsequent chapters deal with the effect of additives on the viscosity of filled resin; the successful application of titanate coupling agents in thermoplastics; electrical, thermal, solvent and anti-fungal properties of organotin-containing poly (ethyleneimine); and additives for stabilizing polymer systems. The final two chapters discuss the ultraviolet stabilization of high-impact polystyrene and the various types of colorants for plastics, respectively.

  • Organophosphorus Monomers and Polymers

    International Series of Monographs on Organic Chemistry
    • 1 Edición
    • Ye. L. Gefter
    • D. H. R. Barton + 1 más
    • Inglés
    Organophosphorus Monomers and Polymers is the first attempt at a generalization and systemization of existent knowledge of the methods of synthesis and the basic properties of monomers and polymers of organophosphorus compounds, and also of their fields of application. It contains valuable reference material, collated in tables (physical constants of the monomers, properties of the polymers and copolymers, etc.). The literature used by the author has covered journals, patents and books up to 1958, and in some cases more recent results are included. The monomers and polymers are tabulated according to the particular class of phosphorus-containin... compounds to which they belong: acids of phosphorus, their derivatives, phosphines, polymers and co-polymers of unsaturated esters of acids of phosphorus, etc. Groups of monofunctional unsaturated phosphorus-containin... compounds (acids, acid chlorides, amides, etc.) are listed in the order of: (a) the distance of the multiple bonds from the phosphorus atom, and (b) the number of multiple bonds. Within each group, the unsaturated substances are listed from simple to complex according to the rules laid down in The Chemist's Handbook. The book is intended for scientists, research workers, engineers, and technologists working on the preparation, manipulation, and investigation of monomers and high molecular weight compounds, and also for students studying related branches of chemistry.

  • Computer Integrated Manufacturing

    From Fundamentals to Implementation
    • 1 Edición
    • Alan Weatherall
    • Inglés
    Computer Integrated Manufacturing: From Fundamentals to Implementation is based on a course in computer integrated manufacturing (CIM) which is part of the Production Engineering Tripos for postgraduate-level students at Cambridge University. The book is intended to provide a thorough coverage of a difficult subject, and to communicate principles as well as something of current practice. This should give a firm basis of knowledge in CIM, and develop an understanding that will be valid for many years in changing business and manufacturing environments. The book covers CIM and manufacturing systems at a technical level, from description of the conventional ""islands of computerization"" to the components of CIM architecture. The business objectives of CIM are described, from analysis of the business environment to cost justification and implementation of CIM systems. CIM is seen as a business tool and not as an end in itself. Each individual and company needs to adapt the tools described in this book to best effect. Study of this book should enable postgraduate students and professional engineers to deal confidently with the subject and use CIM techniques profitably.

  • Marine Boilers

    • 3 Edición
    • G. T. H. Flanagan
    • Inglés
    Marine Boilers, Third Edition provides practical information about boilers and other relevant equipment used at sea on steam and motor vessels. The coverage of the book includes auxiliary boilers, water tube boilers, and boiler mountings. The text also covers stresses in boiler shells; combustion of fuel in boilers; and boiler operation. The book will be of great use to marine engineers, mechanics, and technicians who primarily deals with marine-related machineries.

  • General Aviation Aircraft Design

    Applied Methods and Procedures
    • 1 Edición
    • Snorri Gudmundsson
    • Inglés
    Find the right answer the first time with this useful handbook of preliminary aircraft design. Written by an engineer with close to 20 years of design experience, General Aviation Aircraft Design: Applied Methods and Procedures provides the practicing engineer with a versatile handbook that serves as the first source for finding answers to realistic aircraft design questions. The book is structured in an "equation/derivation... example" format for easy access to content. Readers will find it a valuable guide to topics such as sizing of horizontal and vertical tails to minimize drag, sizing of lifting surfaces to ensure proper dynamic stability, numerical performance methods, and common faults and fixes in aircraft design. In most cases, numerical examples involve actual aircraft specs. Concepts are visually depicted by a number of useful black-and-white figures, photos, and graphs (with full-color images included in the eBook only). Broad and deep in coverage, it is intended for practicing engineers, aerospace engineering students, mathematically astute amateur aircraft designers, and anyone interested in aircraft design.

  • Mathematics for the General Course in Engineering

    The Commonwealth and International Library of Science, Technology, Engineering and Liberal Studies: General Engineering Division, Volume 1
    • 1 Edición
    • John C Moore
    • Robert Robinson
    • Inglés
    Mathematics for the General Course in Engineering, Volume I covers the syllabus in mathematics for the G.1 year of the general course in engineering. Provided in this text are 31 unworked examples, which form a comprehensive revision course that students are recommended to work through toward the end of the G.l year. Answers to the text examples are provided at the end. The subjects covered in this book are arithmetic; indices, logarithms, and the use of tables; length, area, and volume; algebra; geometry; and trigonometry. This volume provides students taking mathematics for the G.1 year in engineering a sound basis for the work of the G.2 year.

  • A Course of Mathematics for Engineers and Scientists

    Theoretical Mechanics
    • 1 Edición
    • Brian H. Chirgwin + 1 más
    • Inglés
    A Course of Mathematics for Engineers and Scientists, Volume 3: Theoretical Mechanics introduces the concepts of virtual work, generalized coordinates and the derivation of generalized forces from the potential energy function. This book is composed of 10 chapters and begins with the principles of mechanics, plane statistics, virtual work, and continuously distributed forces. The succeeding chapters deal with the motion of a particle and the uniplanar motion of a rigid body, as well as the concept of particle dynamics. These topics are followed by discussions of the motions of interacting particles and the principles of stability. The final chapter describes the impulsive motion of a system of particles and collision between bodies. This book will be of value to mathematics and engineering students.

  • Precious Stones

    For Curative Wear; and Other Remedial Uses: Likewise the Nobler Metals
    • 1 Edición
    • W. T. Fernie
    • Inglés
    Precious Stones: For Curative Wear; and Other Remedial Uses presents the different gem stones that is regarded as a powerful tool to cure the ailing in ancient times. This book discusses the myths, superstitions, and biblical significance associated with the stone. It particularly demonstrates the belief of ancient people in the power of the diamond. Some of the topics covered in the book are the weight, historical background, and healing effects of diamond. Considerable chapters examine the weight, origin, and healing effects of these gem stone, including amethyst, aqua-marine, ruby, calcium, copper, jade, jasper, emerald, iron, and lapis lazuli. The remaining chapters are devoted to the occult power of other precious stones. The book can provide useful information to the general reader.

  • Mechanisms for the Generation of Plane Curves

    • 1 Edición
    • I. I. Artobolevskii
    • W. Johnson
    • Inglés
    Mechanisms for the Generation of Plane Curves focuses on the possibility of generating plane curves through kinematic linkages. The book first offers information on the basic theory of the generation of curves by mechanisms with higher pairs of the fourth class and fundamentals of the theory of the generation of curves using mechanisms with lower pairs of class V. Discussions focus on generation of curves by centrode and trajectory pairs; generation of curves with five-link and six-link kinematic chains; basic theorem for the mechanical generation of algebraic curves; and use of the properties of individual forms of transformation mechanisms. The text then examines mechanical generation of straight lines and circles and mechanical generation of ellipses, hyperbolas, and parabolas. The publication ponders on the mechanical generation of third degree curves and mechanical generation of curves of the fourth degree. Topics include mechanisms for generating curves of the focal type; mechanisms for generating special forms of curves; and mechanisms for the generation of the conchoids of the straight line and the circle. The text is a dependable reference for readers interested in the mechanisms involved in plane curves.

  • Electrical Installations Technology

    The Commonwealth and International Library: Electrical Engineering Division
    • 1 Edición
    • J. F. Whitfield
    • N. Hiller
    • Inglés
    Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the “Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemistry of an electric cell, which is classified into two types, namely, the primary and secondary cells. This text also describes the principles, construction, types, and specifications of direct current machines. A chapter emphasizes the storage of energy for short periods in a capacitor, along with a brief discussion of its theory and construction. Other chapters are devoted to alternating-current systems. The remaining chapters cover the commonly used electrical measuring instruments in electrical installation work. This book is an invaluable source for electricians.

  • Electronics and Computer Acronyms

    • 1 Edición
    • Phil Brown
    • Inglés
    Electronics and Computer Acronyms presents a list of almost 2,500 acronyms related to electronics and computers. The material for this book is drawn from a number of subject areas, including electrical, electronics, computers, telecommunications, fiber optics, microcomputers/micro... audio, video, and information technology. The acronyms also encompass avionics, military, data processing, instrumentation, units, measurement, standards, services, organizations, associations, and companies. This dictionary offers a comprehensive and broad view of electronics and all that is associated with it. Cross-references are provided in the form of abbreviations within parentheses. For example, the entry for CCD, charge-coupled device, provides three cross-references: charge-transfer device (CTD), metal-oxide semiconductor (MOS), and capacitor (C,6). To broaden further the explanation, if required, referral to entries CTD, MOS, and C part 6 (C is a multiple entry with 10 parts) is advised. The system of prefixes and units used in the Système International d'Unités is followed throughout the book. This monograph is intended for students, engineers, and technicians as well as those with an interest in computers and electronics.

  • The Nature of Metals

    • 1 Edición
    • Bruce A. Rogers
    • Inglés
    The Nature of Metals focuses on the characteristics, properties, composition, and reactions of metals. The publication first takes a look at the composition of metals, arrangement of atoms in metals, and alloys. Discussions focus on solubility of metals in each other, constitutional diagrams, naming of planes, patterns of complex structures, sizes of atoms, space lattices, removal of metal by etching reagents, and how etching reveals structure. The text then examines solidification, movement of atoms in solid metals, some effects of atomic movements, and hardening of steel. Topics include effect of rate of cooling, hardenability, tempering, mechanism of age hardening, effect of temperature on the hardening behavior, effect of rate of cooling on the precipitation of tin, mechanism of diffusion, and relative rates of diffusion. The manuscript explores metals in nuclear reactors, recrystallization, and special arrangements of atoms, including peculiar behavior in copper-gold alloys, formation of subgrains, and screw dislocations. The book is a valuable source of information for researches interested in the nature of metals.

  • Photoelasticity for Designers

    International Series of Monographs in Mechanical Engineering
    • 1 Edición
    • R. B. Heywood
    • D. J. Silverleaf + 1 más
    • Inglés
    Photoelasticity for Designers covers the fundamental principles and techniques of photoelasticity, with an emphasis on its value as an aid to engineering design. This book is divided into 12 chapters, and begins with an introduction to the essential optical effects necessary for an understanding of the photoelastic phenomena. The next chapters describe the concept and features of polariscopes; the characterization of photoelastic materials; the formulation and testing of two-dimensional models of photoelasticity; and the application of model stresses to prototypes for the analysis of stresses occurring in the plane of the model, effectively of uniform thickness. These topics are followed by a discussion of the frozen stress technique and a comparison of the various materials that can be used for models in the technique. The ending chapters deal with the principles and application of the birefringent coating and distorted model techniques. This book will prove useful to photoelasticians, design engineers, and students.

Temas relacionados