Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Physical Principles of Imaging in Medicine

    • 1 Edición
    • Adam W. Anderson + 3 más
    • Inglés
    Medical Imaging: Mathematical and Physical Principles gives an introduction to the mathematical and physical concepts and principles that underlie modern radiological imaging techniques. It explains the basic phenomena and mathematical concepts that are central to the use of physical methods for image formation in biomedicine. By focusing on the physical and mathematical principles, it provides knowledge that will continue to hold true even as technological and other advances change the nature and detail of future medical imaging applications.Written as a pedagogic textbook explaining the principles rather than a technical manual describing imaging methods, Medical Imaging: Mathematical and Physical Principles is very suitable as a foundational reference for senior undergraduates, graduate students and researchers with a background in either biomedical engineering, engineering, applied physics, computer science, and mathematics. It will be a well-thumbed resource throughout a researcher’s career.

  • Hazardous Materials in Civil Engineering, Volume 1

    Fundamentals, Classifications and Risk Assessment
    • 1 Edición
    • Volumen 1
    • Ali Akbar Firoozi + 1 más
    • Inglés
    Hazardous Materials in Civil Engineering, Volume 1: Fundamentals, Classifications and Risk Assessment addresses the complex challenges posed by toxic substances and harmful waste generated during construction projects, thus creating a cohesive framework for a better understanding of the multidisciplinary interrelationships among sustainable development, human health, and the environment. The book thoroughly reviews methodologies for identifying and classifying hazardous materials; systematic processes for their handling, storage, transportation, and disposal; innovative risk detection and monitoring techniques; remediation and emergency preparedness measures; and standards and best practices from different regions across the world.By combining scientific research with practical applications and emphasizing critical, coordinated approaches to unify safety, reliability, environmental responsibility, and regulatory compliance, the book is an indispensable reference resource for a variety of readers in both academia and industry.

  • Intelligent Monitoring of Transport Infrastructure

    Remote Sensing and Analytical Techniques
    • 1 Edición
    • Mercedes Solla Carracelas + 1 más
    • Inglés
    Intelligent Monitoring of Transport Infrastructure comprehensively addresses the challenges of efficiently inspecting, managing, and maintaining transport systems, structures, and networks. It fundamentally proves how transformative the leveraging of cutting-edge instruments and accompanying techniques to enhance data collection, processing, and visualization can be for the field, resulting in more environmentally conscious as well as cost-efficient decision-making operations. From the latest advances in remote sensing, satellite imagery, digital twins, extended reality, and UAV applications to innovative uses of machine learning and artificial intelligence, the book offers a systematic overview whose added value is in the multitude of multi-disciplinary perspectives and invaluable actionable insights that it contributes.The volume is divided into four sections, each of the first three focusing on a key area of development: data collection and analysis; data processing and AI applications; data visualization and management. Finally, the fourth section is fully dedicated to real-world case studies that illustrate data integration methods and the stumbling blocks of inherent implementation practices alongside lessons learnt and workable solution examples that readers from both academia and industry can benefit from, essentially enabling further investigations into enhancing the safety, resilience, and sustainability of transportation infrastructure.

  • Handbook of Modern Dressing and Grinding Technologies, Volume 2

    Processes and Practical Applications
    • 1 Edición
    • Bahman Azarhoushang
    • Inglés
    Handbook of Modern Dressing and Grinding Technologies Volume 2: Processes and Practical Applications covers every facet necessary for a deep understanding of modern dressing and grinding processes. Combining theoretical foundations with extensive industrial case studies, the book shows how tool selection, process parameters, and machining strategies affect process outcomes. By connecting process fundamentals with real-world applications, it offers valuable guidance for both experts and readers seeking a deeper insight into dressing and grinding technologies.Topics include mechanical dressing with stationary and rotary diamond dressers, vitrified-bonded conventional dressing tools, and non-mechanical methods such as WEDM and laser dressing. The volume also addresses major grinding processes, including external cylindrical, centreless, internal cylindrical, surface, tool, free-form, jig, hybrid, and double-sided surface grinding, as well as monitoring, troubleshooting, and optimisation techniques.

  • 3D Printing in Materials Engineering

    Recent Developments and Future Perspectives
    • 1 Edición
    • Sayan Ganguly + 2 más
    • Inglés
    From aerospace to medicine, 3D printing is poised to reshape the future of manufacturing in many industries. Additive manufacturing is a game-changing technology that will in the future drastically alter the product development, manufacturing, and distribution processes. 3D Printing in Materials Engineering presents the latest developments in this important field. The book covers the fundamentals, materials, types of 3D printing techniques, and their multi-dimensional applicability over various engineering applications. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, manufacturers, chemists, and other professionals who are working with 3D printing over various engineering applications.

  • Digital and Collaborative Systems for Innovative Manufacturing

    • 1 Edición
    • Mukund Janardhanan + 2 más
    • Inglés
    Digital and Collaborative Systems for Innovative Manufacturing explores the vital role of digitalization and collaboration in manufacturing, presenting the latest research on technologies that drive innovative systems. The book emphasizes the integration of cutting-edge tools, connectivity and collaborative practices to enhance productivity and efficiency. Structured in two sections, the first part covers the principles of digital and collaborative systems, focusing on key concepts and trends that facilitate manufacturing innovation. The second part delves into designing and managing collaborative manufacturing ecosystems, highlighting supply chain integration, digital collaboration platforms, and human-robot cooperation.Featurin... case studies and best practices from various industries worldwide, this book offers practical insights into the current state of digital manufacturing. Key themes include digital transformation, sustainability, collaborative ecosystems, and emerging business models. Intended for scientists, engineers, academics, manufacturing service providers and technical management professionals, this comprehensive guide is essential for navigating the challenges and opportunities of Industry 4.0 and 5.0 in a competitive digital age.

  • Precision Ultrasonic Measurement of Lubricant Film Thickness

    Theory, Compensation, and Application
    • 1 Edición
    • Pan Dou + 4 más
    • Inglés
    Precision Ultrasonic Measurement of Lubricant Film Thickness: Theory, Compensation, and Application offers a comprehensive scientific reference for researchers, engineers, and students interested in tribology, mechanical engineering, and machine condition monitoring. The book addresses the increasing demand for accurate, in situ monitoring of lubrication film thickness in critical machinery, a key factor in reliability and predictive maintenance. Integrating acoustics, signal analysis, and multiphysics modeling, this book provides a systematic, multidisciplinary resource in the field.The contents span fundamental principles, ultrasonic system design, multilayer and thin-film measurement models, calibration and compensation strategies, and advanced signal processing. Readers are guided through practical engineering case studies, including sliding and rolling bearings, fuel pumps, hydropower generator bearings, and wind turbine pitch bearings. Each chapter provides theoretical background, experimental validation, and actionable methodologies for both laboratory and industrial environments.This book equips its readers with the knowledge to implement high-precision measurement systems, address practical engineering challenges, and translate laboratory advances into robust industrial solutions. It supports academic research, industrial innovation, and the development of next-generation condition monitoring and maintenance strategies.

  • High-Order Multiscale Modelling Methods for Heterogeneous Materials

    • 1 Edición
    • Hong Zuo + 3 más
    • Inglés
    Discover the latest advancements in multiscale modeling of heterogeneous materials. High-Order Multiscale Modelling Methods for Heterogeneous Materials addresses the challenges of predicting complex physical phenomena across nanoscale to macroscale, where traditional methods fall short due to strong heterogeneity and oscillations. It introduces high-order multiscale models that enable bidirectional data transfer between scales, combining micro-, meso-, and macro-level simulations for real-time, accurate predictions of coupled flow, pressure, displacement, and thermal fields. Structured into eleven chapters, the book provides a practical reference for researchers, engineers, and students working in multiscale computing and material science.

  • Deformation Processing of High Entropy Alloys

    • 1 Edición
    • Bharat Gwalani + 1 más
    • Inglés
    Deformation Processing of High Entropy Alloys offers an in-depth exploration of the mechanical properties and processing methods of high entropy alloys (HEAs), covering topics such as microstructural evolution, deformation mechanisms, alloy composition, processing techniques, and various applications. The book provides an introduction to HEAs, outlining their differences from more traditional alloys before diving into more complex subjects such as their stability and metastability, their crystal structures, FCC- and BCC-based HEAs, as well as thermomechanical treatments and their mechanical properties. Deformation processing techniques, solid state processing methods, and additive manufacturing of HEAs are each discussed as well, as are modeling and simulation approaches. Finally, a broad range of applications and limitations for these cutting-edge materials are also covered.

  • Plasma Processing for Semiconductor Materials and Thin-Film Devices

    • 1 Edición
    • Kuan Yew Cheong + 4 más
    • Inglés
    Plasma Processing for Semiconductor Materials and Thin-Film Devices covers the state-of-the-art in plasma processing of thin films. The book focuses on fundamental plasma theory, plasma for advanced applications, advanced characterization techniques, plasma and performance in semiconductor devices, and plasma processing. Sections consider the fundamental physics of plasma then move to advanced applications in the processing of semiconductor materials and their relation to the performance of semiconductor thin film devices. Subsequently, the book investigates the adoption of plasma for advanced (including thin film) characterization methods, finally addressing emerging plasma technologies such as liquid plasma, cold atmospheric plasma, and advanced plasma techniques.This book will be of interest to students, researchers, and practitioners in any field that utilizes plasma processing, since its chapters have been written by leading authorities from both academia and industry.

  • Usability Testing Essentials

    Ready, Set ...Test!
    • 3 Edición
    • Carol M. Barnum
    • Inglés
    Usability Testing Essentials: Ready, Set ...Test!, Third Edition presents a practical, step-by-step approach to learning the entire process of planning and conducting a usability test. The book explains how to analyze and apply results and what to do when confronted with budgetary and time restrictions. This is the ideal book for anyone involved in usability or user-centered design—from students to seasoned professionals. Updated throughout, this book reflects the latest approaches, tools, and techniques needed to begin usability testing or to advance in this area.

  • Advanced Fiber-Reinforced Cementitious Matrices

    Enhancing Performance and Longevity of Concrete Structures
    • 1 Edición
    • Moncef L. Nehdi + 2 más
    • Inglés
    Advanced Fiber-Reinforced Cementitious Matrices is an authoritative reference volume that offers an in-depth exploration of FRCM systems, bridging the gap between theory and practical application in the critical domain of structural strengthening and rehabilitation.The book covers the full spectrum of FRCM technology—from material characterization, manufacturing techniques, and mechanical properties to design guidelines and installation methodologies paired with quality control, inspection procedures, and testing protocols. It draws on the latest research to emphasize key innovation aspects, such as emerging material trends, sustainability-speci... assessments, integration with advanced computational tools, and performance-related developments. The substantial potential and benefits of FRCM are highlighted through successful implementation examples, comparisons with conventional approaches, and lessons learnt from real-world field use, all of which underscore the systems’ versatility and efficiency.The comprehensive perspective put forward by this international group of highly specialized experts will prove invaluable to researchers, professionals, and advanced students seeking to deepen their understanding and actively contribute to advancing the state of the art in construction practices.

  • Causal Machine Learning in Civil and Environmental Engineering

    Case Studies and Datasets
    • 1 Edición
    • M. Z. Naser
    • Inglés
    Machine learning (ML) is in constant transformation and various engineering disciplines are now heavily investing in it too. Currently, the majority of civil- and environmental-based works on ML are utilizing pure data-driven (i.e., black box) models built on correlations and associations. These models, however, do not truly identify the cause-effect relationship needed to answer questions such as: what caused a given structure to fail? Why does a particular construction material behave the way it does under specific conditions?Causal Machine Learning in Civil and Environmental Engineering: Case Studies and Datasets aims to introduce causal ML approaches to civil and environmental engineering, covering theories, applications, as well as providing datasets, code, and examples of solutions to key problems in the sector. Students, academics, and engineering professionals both in the private and public sectors will find this book to be an invaluable reference source.

  • 3D Printed Concrete

    Curing Regimes, Environmental Stressors, and Sustainable Performance
    • 1 Edición
    • Bochao Sun + 2 más
    • Inglés
    3D Printed Concrete: Curing Regimes, Environmental Stressors, and Sustainable Performance offers a concise and practical synthesis of emerging innovations in 3D printed concrete, covering its thermal degradation, early-age strength prediction, CO2 curing, and recycled material utilization. The book provides a fundamental understanding of the material and its manufacturing process, as well as insight into optimizing 3D printed concrete for sustainability and durability under real world conditions. Uniquely focusing on the integration of mechanical performance, environmental exposure, and carbon reduction strategies, readers will come away with a better understanding of the physical and chemical mechanisms affecting printed concrete under heat and moisture exposure, the ability to implement maturity models and predictive tools for early-age strength and printing schedule control, and the knowledge to apply CO2 curing and recycled fine aggregates in order to reduce emissions and enhance structural performance. Materials and mix-design requirements and the effects of printing parameters on quality are each covered as well.

  • Microwave/RF Applicators and Probes

    for Material Heating, Sensing, and Plasma Generation
    • 3 Edición
    • Mehrdad Mehdizadeh
    • Inglés
    Microwave/RF Applicators and Probes: for Material Heating, Sensing, and Plasma Generation, Third Edition presents the design rules and principles of high-frequency applicators and probes for material processing and sensing applications. After covering the basics of field-material interactions, the book reviews and categorizes probes and applicators, demonstrates real-world applications, and offers numerically solved examples. Sections bring together the overall area of high-frequency applicators and probes for material interactions as an integrated science, provide a useful reference to those who design these devices, and present an update on the most recent developments and findings. The key design principles of various applicators and probes are often quite similar and, once understood, can be readily applied to diverse applications, thus avoiding a great deal of design trial and error.

  • Artificial Intelligence in Engineering Applications

    Empowering Transformative Innovations in Multidisciplinary Engineering
    • 1 Edición
    • Tarek Saadawi + 5 más
    • Inglés
    Applied Artificial Intelligence for Engineering Applications: Empowering Transformative Innovations in Multidisciplinary Engineering offers an integrated view of AI’s transformative potential in multidisciplinary engineering, bridging the gap between AI advances and their applications in various engineering disciplines, including civil, mechanical, electrical, chemical, and robotics. The book starts with an introduction to the field, providing an overview of AI technologies and their relevance to engineering, discussing different AI approaches such as machine learning, reinforcement learning, neural networks, and natural language processing.In addition, the computational tools and software used for each of these approaches are covered, as are AI-driven innovations in electronics design and manufacturing and the role of AI in the development of advanced sensors and IoT devices. Chapters then cover the deployment of AI in specific engineering disciplines, outlining its use in civil engineering, mechanical engineering, production engineering, and chemical engineering. The use of AI as a solution for energy efficiency and management and renewable energy integration is also discussed.

  • Dynamic Accident Modeling and Risk Management of Urban Natural Gas Pipelines

    • 1 Edición
    • Xinhong Li + 2 más
    • Inglés
    Dynamic Accident Modeling and Risk Management of Urban Natural Gas Pipelines provides a comprehensive and systematic framework for understanding, modeling, and managing accidents in urban natural gas pipelines. It covers SPN (Stochastic Petri Net) based accident evolution modeling, CFD (Computational Fluid Dynamics ) based leak and dispersion simulation, explosion modeling, deep-learning-based leak detection and diagnosis, Bayesian risk assessment, vulnerability analysis, and game-theoretic risk management strategies.

  • Artificial Intelligence and Data Science in Electric Vehicle Technology and Infrastructure

    • 1 Edición
    • V. Subramaniyaswamy + 3 más
    • Inglés
    Artificial Intelligence and Data Science in Electric Vehicle Technology and Infrastructure offers a comprehensive exploration of how AI and data science are revolutionizing the electric vehicle (EV) industry. It guides readers through the basic concepts of EV technology and explains how machine learning and blockchain optimize battery management, predictive maintenance, and secure fault detection. The book highlights cutting-edge techniques like sensor fusion and computer vision for autonomous driving, alongside real-time analytics and edge computing for low-latency AI applications. It also covers intelligent charging infrastructure, route optimization, and renewable energy integration and shares insights into cybersecurity, business models, and demand forecasting, complemented by practical case studies.This book is a useful resource for researchers, scientists, advanced students, software engineers, data scientists, R&D professionals, and other industrial personnel working at the intersection of computer science, electrical engineering, artificial intelligence, data science, and machine learning with an interest in advancing AI and ML applications in electric vehicle technologies.

  • Digital Transformation in Retail Supply Chain Management for Logistics 5.0

    • 1 Edición
    • Adnan Ahmed Sheikh + 3 más
    • Inglés
    Digital Transformation in Retail Supply Chain Management for Logistics 5.0 explains how these technologies are reshaping retail supply chain management. The book elucidates on the digital tools and strategies organizations can employ to optimize their retail supply chain management, minimize costs, enhance customer satisfaction, and achieve sustainability objectives through industry 5.0-enabled technologies. It innovatively blends the details of recent advancements across retail supply chains and supply chain-related digital transformations. Its cutting-edge perspective makes it an invaluable asset for industry professionals, policymakers, business owners, managers, researchers, practitioners, academicians, instructors, and students in retail, logistics supply chain management, digital business, and innovation.The book explores the nuances of the Supply Network 5.0, discussing the synergy between humans and machines, especially in the context of robotic process automation systems and artificial intelligence tools in the “new normal” of retail supply chain management. In addition, it specifically addresses textile products, FMCG, online products, construction, food and beverages, the shoe industry, SMEs, and other manufacturing sectors. Other sections delves into the often-overlooked environmental sustainability ramifications of the Fifth Industrial Revolution.

  • Industrial and Municipal Sludge

    Resource Recovery, Circular Economy, and Control of Greenhouse Gas Emissions
    • 2 Edición
    • Majeti Narasimha Vara Prasad + 1 más
    • Inglés
    Industrial and Municipal Sludge, Second Edition systematically addresses key aspects and pressing issues related to sludge management within the wastewater and sludge treatment industries, with the intent of aligning them more closely with global, sustainable development endeavors. This timely revision highlights technological advancements and current trends in cutting-edge sludge management methods and resource recovery strategies, providing valuable insights into innovative solutions that can also significantly reduce greenhouse gas emissions and support a circular economy. The volume also features a host of case studies from different regions and industry contexts that illustrate adaptability and scalability of sludge management techniques.The updated coverage doesn’t overlook the challenges that the field faces, such as high costs, equipment limitations, regulatory hurdles, health and safety concerns, and public acceptance. Ultimately, the book functions as a platform for multidisciplinary perspectives and best-practice approaches to drive viable change in industrial and municipal operations alike.

  • Additively Manufactured Engineering and Structural Materials with High Mechanical Performance

    • 1 Edición
    • Laichang Zhang + 1 más
    • Inglés
    Additively Manufactured Engineering and Structural Materials with High Mechanical Performance presents state-of-the-art research advances and applications of high-performance materials and structures manufactured by different 3D printing methods. It covers the design, manufacturing, mechanical properties, post-processing, and applications of various engineering materials, including a broad array of metals and alloys, ceramics, polymers, and composites, examining their microstructures and what determines their optimal mechanical performance. Cutting-edge topics such as artificial intelligence-assiste... quality control, machine learning-assisted performance evaluation, and 4D printing are each discussed. Multi-material additive manufacturing, the thermomechanics of additive manufacturing, and metal powder recycling are also covered, and the book also provides insight into potential applications of these materials through illustrative case studies from the automotive, construction, and bioengineering industries.

  • Cellulose in 3D and 4D Printing

    Additive Manufacturing for Sustainable Processing and Applications
    • 1 Edición
    • Chaudhery Mustansar Hussain
    • Inglés
    Cellulose in 3D and 4D Printing: Additive Manufacturing for Sustainable Processing and Applications addresses the growing need for sustainable materials in the manufacturing industry. The book covers the integration of cellulose into 3D and 4D printing technologies, providing properties, processing methods, and potential applications, and bridging the gap between material science and advanced manufacturing. The book starts with a section covering the fundamentals of using cellulose in additive manufacturing, with chapters discussing cellulose extraction and purification methods, the mechanical and rheological behaviors of cellulose, and the use of recycled cellulose in 3D and 4D printing.Following sections cover processing and printing technologies, including the processing of cellulose-based filaments and resins, as well as the use of multi-material cellulose and hybrid cellulose in additive manufacturing. Design optimization, simulation, and modeling of 3D and 4D printing with cellulose is also outlined, as are applications in aerospace, biomedicine, electronics, and food science. Case studies and a brief section on commercialization, scale-up strategies, environmental impacts, and more round out the content.

  • Digital Technologies in Metal Casting

    • 1 Edición
    • Amit Sata + 2 más
    • Inglés
    Digital Technologies in Metal Casting: Data Analytics, Simulation, Industry 4.0, and Artificial Intelligence focuses on integrating cutting-edge technology with metal casting, outlining simulation methods, data analytics, artificial intelligence, and other interactive and immersive technologies. The book starts with overviews of both metal casting and the technologies to be integrated before moving into chapters on the specific integration of those technologies into the metal casting process. The utilization of simulation, data analytics, artificial intelligence, cyber manufacturing, and more are highlighted, with each chapter covering specific use cases, commonly encountered challenges, and solutions for overcoming those challenges.

  • K-out-of-n Structures

    Theories, Methods and Applications
    • 1 Edición
    • Mangey Ram
    • Inglés
    In an era where global economic development demands innovation, reliability engineering stands at the forefront of modern industrial challenges. Over the past 50 years, profound advancements in reliability analysis have transformed how engineers and academics approach system performance, offering significant economic benefits and improving quality of life worldwide. K-out-of-n Structures: Theories, Methods and Applications delves into the extensive research surrounding k-out-of-n structures, crucial for modeling diverse engineering systems—from telecom microwave stations to oil pipelines and electron accelerator vacuum systems. This comprehensive volume is designed for professionals, students and researchers eager to deepen their understanding of reliability engineering. Authored by leading scientists, mathematicians, and engineers, this book brings together current research and novel approaches.

  • Encyclopedia of Tribology and Lubrication

    • 1 Edición
    • Jun Qu + 1 más
    • Inglés
    Encyclopedia of Tribology and Lubrication, Three-Volume Set covers this multidisciplinary field that supports diverse areas of technology in daily life. As there are numerous situations in which rubbing parts must perform reliably over long lifetimes, the book covers materials, lubricants, and surface engineering treatments, along with the numerous choices and challenges that practicing engineers face. This structured resource guides users through proven strategies to reduce erosion friction, abrasion wear, and surface damage while also providing fundamental principles that underlie problems and mitigation.Data and case studies highlight the rationale for selecting materials, lubricants, and operating conditions, along with tactics on how to apply wear and friction measurements. Finally, standard test methods and supporting techniques, like hardness and surface roughness measuring methodology, are discussed in detail.

  • Ships in Waves

    Motions and Operational Impacts
    • 1 Edición
    • Milan Hofman
    • Inglés
    Ships in Waves: Motions and Operational Impacts delivers a structured and in-depth exploration of the core theories and phenomena governing vessel interactions with wave environments. Progressing from fundamental concepts to elaborate formulations, the book supports gradual engagement with complex material, facilitating confident physical understanding. Topics include ship oscillations (both in calm water and under wave excitation), stochastic wave modeling, responses in regular and irregular seas, and the consequences of extreme motions—such as dynamic loads, rolling, slamming, and capsizing.Organised modularly, the contents allow selective study and targeted review based on the reader’s interest or specialization, uniquely bridging the divide between intricate technical knowledge and engineering application. In addition to the essential theoretical framework, cutting-edge advances and rarely covered aspects are also addressed, including wave energy converters and a critical review of the new IMO intact stability criteria.Designed to serve audiences in academic and research contexts, this authoritative volume is especially valuable not only for assessing motion characteristics but also for enhancing system reliability and informing future design strategies for vessels, offshore platforms, floating structures, and other marine installations that demand a nuanced balance of performance, safety, and sustainability.

  • Wide/Ultrawide Bandgap Semiconductor Devices for Harsh Environments

    • 1 Edición
    • Volumen 123
    • Inglés
    Semiconductors and Semimetals series, highlights new advances in the field, with this new volume presenting interesting chapters. Each chapter is written by an international board of authors.

  • High Power Insulated-gate Bipolar Transistor (IGBT) Drivers

    Design and Applications
    • 1 Edición
    • He Zhiyuan + 1 más
    • Inglés
    High Power Insulated-gate Bipolar Transistor (IGBT) Drivers: Design and Applications presents the latest developments in IGBT driver technology, drawing upon the authors’ extensive experience and authority within the field. The book fills the gap in the market for a reference resource specifically addressing IGBT driver development and implementation. The book combines current theory with practical, real-world case studies, to enhance readers’ understanding of IGBT driver technology. Detailed sections in the book on the principles of circuits and control will have particular appeal for academic readers. Engineers will find the systematic presentation of driver circuit reliability and testing methods especially useful. The book enables readers to design a high-reliability IGBT driver capable of managing high-voltage and high-power applications and able to resist strong electromagnetic interference. Provides readers with robust technical support for the engineering application of high-voltage and high-power IGBT drivers. Driver implementation and test methodologies are described in detail, together with a wide range of application scenarios.High Power Insulated-gate Bipolar Transistor (IGBT) Drivers is a comprehensive theoretical and practical reference resource for IGBT industry professionals and researchers.

  • Advances in Automotive Exhaust Gas Control and Aftertreatment Technologies

    • 1 Edición
    • Mejdi Jeguirim
    • Inglés
    Automotive Exhaust Gas Control and Aftertreatment Technologies provides valuable insights into effective practices and innovative solutions to address the complexities of emissions management for internal combustion engines (both gasoline and diesel), alternative fuel vehicles, and hybrid systems. The book opens with the fundamental theory of pollutants’ formation and a comprehensive examination of the critical challenges posed by harmful emissions to both human health and the environment. The ensuing structured framework allows for an in-depth exploration of exhaust gas control technologies, which delve into catalytic converters, oxidation and reduction methods, and advanced aftertreatment devices.The integration of renewable fuels and hybridization techniques is also addressed, spotlighting their significance in achieving cleaner and more efficient vehicle systems engineering. With contributions from leading experts in the field, this well-thought-out reference volume is the ideal resource for researchers, students, and professionals who aim to drive the evolving automotive landscape forward in a pivotal way while also meeting both regulatory and consumer demands.

  • Artificial Intelligence Methods in Railway Infrastructure Systems

    Application of Data-Centric Engineering
    • 1 Edición
    • Diogo Ribeiro + 5 más
    • Inglés
    Artificial Intelligence Methods in Railway Infrastructure Systems: Application of Data Centric Engineering offers a thorough exploration of the latest advancements transforming railway management. With a strong focus on practical and theoretical approaches, this book introduces innovative AI techniques including machine learning, computer vision, and predictive analytics. These methodologies are presented in the context of railway infrastructure, empowering engineers and researchers to utilize cutting-edge technology for enhanced system reliability. By bridging the gap between theory and real-world applications, the book enables early detection of anomalies, supporting proactive maintenance strategies and improved operational efficiency in railway networks.This book acts as a vital reference for those seeking to understand and implement AI-driven solutions in railway systems, encouraging the adoption of anticipatory strategies to shape future trends. Readers will discover how AI innovations can streamline operations, optimize resource allocation, and significantly improve network safety, making it an essential guide for professionals looking to stay ahead in the evolving field of railway infrastructure management.

  • Integrated Driving Technology for Electric Vehicles

    • 1 Edición
    • Jinyue Tian
    • Inglés
    Integrated Driving Technology for Electric Vehicles reviews and provides analysis of the integrated power transmission technology of electric vehicles. Based on the external characteristics of the motor, the parameters and performance design requirements of the vehicle, the driving form of the motor integrated transmission is selected, and the power, torque, speed of the driving motor and the gear number and speed ratio of the transmission are matched and calculated.The content of this book includes parameter matching between the drive motor and transmission, motor selection and design, transmission design, powertrain coupling control method, braking method for powertrain gear integration control shifting schedule, requirements and optimization techniques for shifting process, etc. The book argues that on the basis of ensuring the power performance requirements of automobiles, the energy utilization efficiency of electric vehicles can be improved through preliminary parameter matching of motors, transmission systems, and power batteries. Integrated control of electric vehicle power transmission system refers to the application of electronic technology, with electronic control unit (ECU) as the core, to achieve automatic operation of vehicle starting and shifting by controlling the actuator and controlling the power transmission system through electronic devices. The book shows readers to understand the basic working principles of integrated transmission control of electric vehicles, together with the basic theories and methods of integrated transmission control of electric vehicles. The concepts of "power system" and "power transmission system" appear in this book, and their connotations need to be explained here. The so-called "powertrain" includes three assemblies: drive motor, controller, and power converter. The 'power transmission system' consists of components such as the drive motor, gearbox, and differential.The book introduces two concepts: the "integrated" drive system for electric vehicles and the "integrated" drive system for electric vehicles. The so-called "integrated" drive system for electric vehicles refers to the integrated electric drive system (IEDS), which assembles the electric motor, gear transmission device, and drive axle together to reduce redundant components in traditional automotive power transmission systems, forming an integrated drive component that completes the power transmission system of electric vehicles for starting, driving, and braking. The highly "integrated" electric vehicle power system constitutes a highly integrated electric drive system (HIEDS), which integrates the controller, power converter, and cooling device of the motor drive system into the integrated power transmission system. By using the reasonable matching technology between the drive motor and the transmission system, the optimal control of the electric vehicle is achieved, making the function of the drive transmission system more excellent and the structure more compact.

  • Electronics Cooling: From the Chip to the Datacenter

    • 1 Edición
    • Volumen 62
    • Inglés
    Electronics Cooling: From the Chip to the Datacenter, Volume 62 provides a concise, practical guide that traces thermal management from the microchip to the data center. It explains how heat is generated at the transistor level, and how cooling strategies, conduction, convection, liquid immersion, and phase change cooling scale up to keep entire data centers reliable and energy-efficient. The book blends fundamentals (heat transfer, modeling, materials) with real-world design guidelines, case studies, and best practices for engineers, researchers, and students working on electronics cooling across all scales.

  • Independent All-Wheel Drive Technology for Electric Vehicles

    • 1 Edición
    • Jinyue Tian
    • Inglés
    Independent All-wheel Drive Technology for Electric Vehicles provides a detailed review of all-wheel-drive, technology for electric vehicles, including state estimation, stability torque control, motor driven torque control, basic requirements and design methods for implementing electronic differential steering. This includes: the overall design of all-wheel-drive electric vehicles; the structural principles of all-wheel-drive electric vehicles; all-wheel-drive electric vehicle parameters and matching calculation methods; vehicle driving state estimation; all-wheel-drive electric vehicle anti-skid control; stable drive torque control technology; electronic differential control technology; energy-saving drive torque control strategy for all-wheel-drive electric vehicles; all-wheel-drive electric vehicle drive fault compensation control; and thermal analysis of all-wheel-drive electric vehicle wheel hub motors.

  • Sustainability and Construction

    The Global Context and the New Zealand Perspective
    • 1 Edición
    • Kamal Dhawan + 3 más
    • Inglés
    Sustainability and Construction: The Global Context and the New Zealand Perspective explores various dimensions of sustainability in construction. It commences with a comprehensive discourse on the sustainability concept and its construction context.Next, it examines sustainability across the various phases of a typical construction project—from inception, through operationalization, to end-of-life management—on one hand, and, on the other, the sustainability of associated processes and domains such as supply chains, logistics, delivery models, and waste management. The narrative is extended through sustainability rating schemes, regenerative built environment, and the context of technology in construction. A strategic organizational viewpoint is presented through an integrated treatment of corporate sustainability, its assessment, reporting, and benchmarking, against the backdrop of the sustainability imperative. Stakeholder perspectives and the “wickedness” of sustainable construction in New Zealand conclude the work.The unique treatment of the overarching themes impacting sustainability in the global construction industry and their intersection with the New Zealand standpoint delivers a well-balanced and thoroughly researched resource. It is a value-added, highly visual text for engineers, students, researchers, policy makers, and industry stakeholders alike.

  • AI-Driven Solutions for Greening the Built Environment

    Integrating Circular Economy, Smart Technologies, and Resilience
    • 1 Edición
    • Fernando Pacheco-Torgal + 1 más
    • Inglés
    AI-Driven Solutions for Greening the Built Environment: Integrating Circular Economy, Smart Technologies, and Resilience provides an authoritative resource on the integration of artificial intelligence (AI) within sustainable building practices, targeting the greening of the built environment by combining circular economy principles, smart technologies, and resilience strategies. It addresses the urgent need for improved energy efficiency, adaptive management, and reduced environmental impact across the building lifecycle, at a time when the sector faces mounting pressures from climate change, rapid urbanization, and resource scarcity. The book explores how AI-driven tools—such as generative design, digital twins, blockchain, and advanced sensing—enable dynamic decision-making, optimize material flows, and enhance occupant comfort, safety, and building adaptability. Organized in three parts, it covers AI in the circular economy, smart technologies, and building resilience, each presenting practical approaches, modeling techniques, and case studies. The structure ensures comprehensive coverage for academic researchers and practitioners, while bridging theory with actionable strategies. Timely and significant, this volume will be an essential reference for professionals, policy makers, and academics seeking cutting-edge, future-proof solutions for sustainable construction.

  • Cementitious Matrices for Low- and Intermediate-Level Radioactive Waste Immobilization

    • 1 Edición
    • Pavlo Kryvenko + 2 más
    • Inglés
    Cementitious Matrices for Low- and Intermediate-Level Radioactive Waste Immobilization reports research progress in this context, reviewing both traditional solidification methodologies and state-of-the-art developments in cementation technologies that promise to fulfill safety functions more dependably and ensure closer compliance with environmentally conscious practices and regulations. The book begins by classifying and characterizing radioactive wastes and explaining the chemistry of cementitious matrices, facilitating the choice of solidification agents and processing equipment. It offers guidelines for the selection of bonding materials, such as hydraulic cement or polymers, and discusses several admixtures and adsorbents to enhance embedding, binder properties, and contaminant stabilization.The book also includes statistical techniques for generating response surface models for large, complicated applications and case studies that collate the international authoring team’s firsthand insights into optimized handling of immobilized waste forms.

  • BSIM-SOI Industry-Standard Compact Model

    Surface Potential-Based FET Model for RFIC Design
    • 1 Edición
    • Chetan Kumar Dabhi + 5 más
    • Inglés
    This book provides complete coverage of compact modeling and design techniques specific to silicon-on-insulator (SOI) transistors. It is the first comprehensive guide that thoroughly explains the industry-standard surface-potential-ba... BSIM-SOI compact model (BSIM-SOI 100 series), contrasting it with the legacy threshold-voltage-ba... BSIM-SOI model (BSIM-SOI 4 series), and provides unique modeling and RF design techniques necessary for the accurate extraction and implementation of the model.BSIM-SOI is the most widely used compact model for SOI MOSFETs in the semiconductor industry. This book aims to equip designers, engineers, and researchers with the knowledge and tools required to optimize SOI-based RF technology, circuit performance, and system integration using BSIM-SOI. The book explains the fundamental surface-potential calculations and addresses various real device effects (such as floating body effect, self-heating effect, dynamic depletion effect, nonlinear body resistance effect, noise, and various leakages, etc.) and layout influences to accurately replicate realistic device behavior. Additionally, it outlines step-by-step parameter extraction procedures for the BSIM-SOI model and presents results from benchmark circuit validations with a primary focus on RF SoC applications.This book will be a valuable reference for the expanding field of SOI technology, catering specifically to circuit designers, device engineers, academic researchers, and students.

  • Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Volume 1

    • 3 Edición
    • Victor Giurgiutiu
    • Inglés
    Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Third Edition provides an authoritative, theoretical, and experimental guide to this fast-paced, interdisciplinary area that has applications across many industries. The book judiciously combines theory, numerical examples, and experiments, providing the background needed to fully understand the physical principles involved in performing structural health monitoring (SHM) with piezoelectric wafer active sensor (PWAS) transducers. Sections cover the fundamental theory relating to SHM, including fracture and failure basics, relevant piezoelectric material properties, vibration modes in different structures, and different wave types, providing the background necessary to understand SHM and apply it to real-world structural challenges.From there, the book segues to experimental practice, covering several complementary methods of using PWAS transducers for SHM applications, such as propagating guided waves (pitch-catch; pulse-echo; phased-array) and standing guided waves. Numerical examples have been added throughout in support of understanding the underlying theory, and the companion website contains MATLAB code, simulation videos, and other supporting materials.

  • Digital Twin Technology for Autonomous Electric Vehicles

    Recent Trends and Future Perspectives
    • 1 Edición
    • Jeevanand Seshadrinath + 4 más
    • Inglés
    Digital Twin Technology for Autonomous Electric Vehicles: Recent Trends and Future Perspectives serves as an essential guide for researchers, advanced students, and engineering professionals eager to harness the transformative potential of this cutting-edge approach. The volume offers an in-depth exploration of the intersection of DT software and AEVs, highlighting how this innovative strategy enhances vehicle functionality, efficiency, safety, and user experience. Reviewing the latest research outcomes and trends and touching on future perspectives, it provides a clear and actionable, step-by-step roadmap that also considers cybersecurity, regulation, ethics, and environmental friendliness.Valuabl... case studies that incorporate practical insights and lessons learned are blended into the work, providing context and application examples in diverse settings. The experts behind the insightful chapters successfully respond to the need for a multidisciplinary resource that bridges theory and best practices while fostering collaborative efforts to further identify and leverage opportunities.

  • Latent Heat Storage for Energy-Efficient Buildings and Zero-Carbon Communities

    • 1 Edición
    • Yuekuan Zhou + 3 más
    • Inglés
    Latent Heat Storage for Energy-Efficient Buildings and Zero-Carbon Communities is an up-to-date reference guide on the rapid progress the field is experiencing while keeping up with much-required transformative initiatives to improve global buildings' energy performance. To lay the foundations, the book covers the fundamentals of phase-change materials, including their thermo-physical properties, nanoscale thermal transport mechanisms, encapsulation techniques, and heat transfer enhancement methods. It goes on to explore the integration of latent heat storage solutions in building envelopes or solar photovoltaics and heating/cooling systems, using mathematical models and performance analysis to discuss thermal management aspects for net-zero energy buildings and zero-carbon community concepts. The volume then delves into practical application of the most advanced, artificial intelligence-powered tools for system modeling and simulation, demand-side management control strategies, and metaheuristic optimization approaches. It concludes with an overview of technical challenges and emerging research areas which evidence academic and industry communities’ persistent interest in the future directions of topics interconnected with the sustainable development of the built environment.

  • Mechanics, Additive Manufacturing, and Applications of High-Entropy Alloys

    • 1 Edición
    • Muhammad Abubaker Khan + 4 más
    • Inglés
    Mechanics, Additive Manufacturing, and Applications of High-Entropy Alloys provides key insight into the mechanics, additive manufacturing, and application of high entropy alloys (HEAs). The book starts with chapters covering the dynamic mechanical and impact properties of these materials, theoretical models for strengthening HEAs and understanding various modes of failure, their low- and high-velocity impact behaviors, the design of lightweight HEAs, and much more. The book also features chapters outlining additive manufacturing techniques of HEAs, the effect of microstructures on their mechanical properties, and deformation mechanisms. The book concludes with chapters discussing the applications of HEAs, such as in lattice structures, high-energy absorption, nuclear energy, aerospace materials, as well as their recycling and sustainability.

  • Sustainable Supply Chain Management

    Computational Approaches and Modelling
    • 1 Edición
    • Syed Mithun Ali + 3 más
    • Inglés
    Sustainable Supply Chain Management: Computational Approaches and Modelling provides a comprehensive understanding of how computational approaches can be leveraged to address the challenges associated with sustainable supply chain management. It offers insights into emerging and advanced modelling techniques to optimize supply chain operations while considering environmental, social, and economic factors. This book will be a valuable resource for researchers, practitioners, and policymakers interested in understanding and implementing sustainable supply chain management practices through computational approaches and modelling. This book helps researchers understand the opportunities, challenges, and solutions by developing innovative computational tools and techniques to integrate sustainability considerations into supply chain decision-making processes.

  • Metal Plasticity

    Experimental Characterization and Constitutive Modeling
    • 1 Edición
    • Yanshan Lou
    • Inglés
    Metal Plasticity: Experimental Characterization and Constitutive Modeling outlines the fundamentals of plastic deformation of metals, related constitutive modeling techniques, and how best to apply these modeling techniques. The book summarizes the plastic behaviors of metals based on experimental observations while also reviewing related constitutive models used to determine their plastic deformation, including isotropic yield functions, anisotropic yield functions, asymmetric yield functions, anisotropic hardening yield functions, and more. It demonstrates the yield surfaces of functions under 2D plane stress, 3D plane stress with shear stress effect, and 3D triaxial loading, amongst others.The development of different plasticity models, including their form, parameters, calibration, accuracy, advantages, and disadvantages are outlined as well, and the book also summarizes and compares various models, emphasizing their costs and user-friendliness, thus allowing readers to select the model that best meets their needs.

  • Applied Charged Particle Optics: Part III

    • 1 Edición
    • Volumen 240
    • Inglés
    Advances in Imaging and Electron Physics, Volume 240 merges two long-running serials, Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy.

  • Ground Penetrating Radar

    Theory and Practice
    • 2 Edición
    • Erica Carrick Utsi
    • Inglés
    Ground Penetrating Radar: Theory and Practice, Second Edition provides well-thought-out, fully updated, and expanded coverage of this NDT, trenchless technique for investigating the subsurface. Written by a recognized field specialist, the volume clearly explains not only how the technology works with introductions to the underlying physics and formation of signal patterning, but also spotlights how it can be successfully applied, including experiential insights into how parameters such as wavelength, attenuation (loss), environment, target size, and depth need proper consideration in any sampling strategy to obtain good survey results.Additional chapters explore a variety of methods for velocity calibration and suggest where they may be useful, review data processing, and address signal loss in challenging soil conditions and potential problem environments with a suite of useful resolution best practices. New to this edition are discussions on specialist GPR applications and state-of-the-art innovations (e.g., data digitization tools; machine learning, deep learning, artificial intelligence to improve detection and reliability in data interpretation; and robotization).With its lucid, comprehensive investigation of this revolutionary and cost-effective solution, Ground Penetrating Radar: Theory and Practice, Second Edition successfully bridges a gap between theoretical understanding and practical mastery, becoming the go-to reference title for a multitude of technical users with varied levels of expertise and across different applied disciplines.

  • Textile Waste Management

    Strategies for Sustainability
    • 1 Edición
    • Mohammad Shahid + 2 más
    • Inglés
    The textile industry is a resource-intensive global business that produces significant amounts of garments and textiles annually, but it also generates substantial waste, raising environmental and social concerns. In response to growing recognition of these issues, various stakeholders are calling for sustainable practices, circular economy strategies, regulatory interventions, and consumer education campaigns to minimize waste and promote recycling. Textile Waste Management: Strategies for Sustainability addresses these challenges, providing insights, analysis, and practical solutions for managing textile waste in a sustainable and responsible manner. It aims to contribute to a more sustainable future by addressing the complexities of textile waste management and advocating for successful strategies to reduce environmental impact and promote circularity.

  • Deformation and Safety Control of Deep Excavation Engineering in Soft Soils

    • 1 Edición
    • Gang Zheng
    • Inglés
    Deformation and Safety Control of Deep Excavation Engineering in Soft Soils provides a comprehensive overview of the challenges and solutions in deep excavation engineering within soft soil environments. The book covers deformation mechanisms, advanced control techniques, and sustainable excavation strategies. Readers gain insights into both theoretical frameworks and practical applications, including passive and active control methods, monitoring technologies, and case studies of projects. The book is designed to serve as a reference for both researchers and engineers looking to enhance safety and performance in deep excavation projects.

  • Design for Additive Manufacturing Fundamentals

    Principles, Techniques, and Design Strategies
    • 1 Edición
    • Mehrshad Mehrpouya + 2 más
    • Inglés
    Design for Additive Manufacturing Fundamentals: Principles, Techniques, and Design Strategies outlines design approaches, techniques, and principles for the optimal additive manufacturing of metals and polymers. Sections cover the concept of design optimization for additive manufacturing (DoAM), outlining the primary steps in the additive manufacturing (AM) workflow and emphasizing the pivotal role DoAM plays in both the design and manufacturing processes. Opportunities and constraints are discussed, as are the different AM techniques available with pros and cons each weighed. Subsequent chapters cover specific design strategies, simulation for AM production processes, generative design approaches for AM structures, and topology optimization techniques.It concludes with chapters focused on strategies and design approaches for lattices and porous structures, design for post-processing in AM, and finally a chapter on the future of DoAM.

  • Material Corrosion and Degradation

    Challenges and Solutions for the Oil, Gas, and Process Industries
    • 1 Edición
    • Reza Javaherdashti
    • Inglés
    Material Corrosion and Degradation: Challenges and Solutions for the Oil, Gas, and Process Industries outlines the causes and effects of commonly encountered corrosion and degradation issues specific to the oil, gas, and process industries. Sections introduce readers to the fundamental principles of both microbial induced corrosion (MIC) and microbial induced deterioration (MID), investigating different types of corrosion such as stress corrosion cracking and corrosion under insulation. From there, the book analyzes a number of challenges related to corrosion management, such as soil side corrosion in above ground storage tanks, corrosion in aromatic petrochemical plants, and pipeline corrosion management from design to operation.Following sections cover corrosion countermeasure strategies, such as effective material selection, corrosion behavior in complex concentrated alloys, and coatings and linings as corrosion prevention tools. The distinction between MIC, MID, and other types of corrosion is emphasized throughout.

  • Introduction to Tactile Intelligence

    • 1 Edición
    • Shan Luo
    • Inglés
    Introduction to Tactile Intelligence emphasizes the growing importance of tactile intelligence, essential for robots to interact effectively with the physical world. This book explores the science of tactile intelligence, equipping robots and intelligent machines with the ability to touch and feel the world, recognize textures, develop fine motor skills, and even convey emotions through physical contact. It anticipates a future where robots seamlessly integrate with the physical world through tactile intelligence and offers solutions for its development and application in various domains. This book is a good resource for students in robotics to experienced professionals, providing a solid foundation in tactile sensing, tactile-based control, and learning, as well as the integration of tactile data into broader robotic systems. This book provides valuable insights and practical guidance, and it serves as a reference for researchers at all stages of their careers in the dynamic field of tactile development and applications.

Temas relacionados