Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials

    • 1 Edición
    • P.D. Portella + 1 más
    • Inglés
    The 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials was held from 7-11 September 1998 in Garmisch-Partenkirch... Germany. In response to a call for papers, nearly 200 extended abstracts from 32 countries were submitted to the organizing committee. These papers were presented at the conference as invited lectures or short contributions and as oral or poster presentation. All the papers were presented in poster form in extended poster sessions–a peculiarity of the LCF Conferences which allows an intense, thorough discussion of all contributions. Each chapter provides a comprehensive overview of a materials class or a given subject. Many contributions could have been included in two or even three chapters and so, in order to give a better overview of the content, the reader will find a subject index, a material index and an author index in the back of the book.

  • Back to Basics Audio

    • 1 Edición
    • Julian Nathan
    • Inglés
    Back to Basics Audio is a thorough, yet approachable handbook on audio electronics theory and equipment. The first part of the book discusses electrical and audio principles. Those principles form a basis for understanding the operation of equipment and systems, covered in the second section. Finally, the author addresses planning and installation of a home audio system.

  • Complete Subject and Author Index, Including Supplements

    • 1 Edición
    • Volumen 104
    • Peter W. Hawkes
    • Inglés
    This much needed volume uniquely brings together all previous volumes of this well-known serial. It allows the readers the ability to navigate through the information in all the preceding volumes by using both author and subject indices.

  • Advances in Applied Mechanics

    Author and Subject Cumulative Index Including, Tables of Content, Volumes 1-34
    • 1 Edición
    • Volumen 35
    • Inglés
    This highly acclaimed series provides survey articles on the present state and future direction of research in important branches of applied mechanics.

  • Radio Antennas and Propagation

    Radio Engineering Fundamentals
    • 1 Edición
    • William Gosling
    • Inglés
    This is the most modern, comprehensive and system-oriented text on radio engineering in print, by a pioneer in the field. Engineers and students need to use this book, which covers the physics of radio systems from a quantum mechanical point of view and offers a unique insight into radio engineering by showing not only how but why radio systems work. Professor Gosling has spent a lifetime in industry and education, including time as Technical Director of Plessey, President of EUREL (European Convention of Engineering Societies), Past President of the Institution of Electrical Engineers, and Chair of Electronic Engineering at the University of Bath. He is currently Visiting Professor at the University of Bath. He has published eleven books and over fifty scientific papers.

  • Improving Machinery Reliability

    • 3 Edición
    • Volumen 1
    • Heinz P. Bloch
    • Inglés
    This totally revised, updated and expanded edition provides proven techniques and procedures that extend machinery life, reduce maintenance costs, and achieve optimum machinery reliability. This essential text clearly describes the reliability improvement and failure avoidance steps practiced by best-of-class process plants in the U.S. and Europe.

  • Encyclopedia of the Solar System

    • 1 Edición
    • Paul Weissman + 2 más
    • Inglés
    The Encyclopedia of the Solar System provides a series of comprehensive and authoritative articles written by more than 50 eminent planetary and space scientists. Each chapter is self-contained yet linked by cross-references to other related chapters. This beautifully designed book is a must for the library of professional astronomers and amateur star-gazers alike, in fact for anyone who wishes to understand the nature of our solar system.

  • Intelligent Components for Vehicles

    • 1 Edición
    • A. Ollero
    • Inglés
    The IFAC Workshop on Intelligent Components for Vehicles (ICV'98) was held in Seville (Spain), on March 23-24 1998. The event follows the Workshop on Intelligent Components for Autonomous and Semiautonomous Vehicles (ICASAV'95) held in Toulouse (France, October 1995). The main objective of ICV'98 was to bring together specialists on components and instruments for automotive systems, mobile robots and vehicles in general to enhance the value of their experience in both hardware and software intelligent components. Future vehicles will deal more and more with autonomous functions to improve safety and traffic management and to reduce consumption and pollution. Numerous on-board decision systems will replace the driver in critical running phases. The problems and solutions experienced, by adopting this new technology, will bring out many common points with other transportation systems and mobile robots. Research and Developments on Mobile Robotics have produced many components for perception, control and planning that can be used in vehicles for collision detection and avoidance, position estimation, guidance and manoeuvering aids for drivers, advanced teleoperation, and other applications. The topics of the Workshop are in an emerging field in which the research is quickly being converted into industrial products. Several applications in the automotive domain, marine vehicles, agricultural and others were included in the program. In addition to the presentation of the papers, ICV also included a plenary talk and a round table about intelligent components for future vehicles with the participation of several industrial companies.

  • Cumulative Subject and Author Index Including Tables of Contents, Volumes 1-50

    • 1 Edición
    • Volumen 53
    • Inglés
    Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The "Willardson and Beer" Series, as it is widely known, has succeeded in publishing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise indeed that this tradition will be maintained and even expanded.Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry.

  • Pattern Recognition and Image Processing

    • 1 Edición
    • D Luo
    • Inglés
    This book delivers a course module for advanced undergraduates, postgraduates and researchers of electronics, computing science, medical imaging, or wherever the study of identification and classification of objects by electronics-driven image processing and pattern recognition is relevant. Object analysis first uses image processing to detect objects and extract their features, then identifies and classifies them by pattern recognition. Its manifold applications include recognition of objects in satellite images which enable discrimination between different objects, such as fishing boats, merchant ships or warships; machine spare parts e.g. screws, nuts etc. (engineering); detection of cancers, ulcers, tumours and so on (medicine); and recognition of soil particles of different types (agriculture or soil mechanics in civil engineering).

  • Global Ergonomics

    • 1 Edición
    • P.A. Scott + 2 más
    • Inglés
    Jointly hosted by the Ergonomics Society of South Africa (ESSA) and the International Ergonomics Association (IEA), this conference was attended by over 300 delegates and represented the largest and most prestigious gathering of eminent international ergonomists in the history of Africa. It also marked the beginning of a revival in concern for the well-being and productivity of people at work in South Africa.The conference aimed to juxtapose two great ergonomic themes – the under-developed ethos of the affluent societies and the technologically advanced ethos of the most affluent societies. The structure of the proceedings reflects this with the first section addressing the priorities of countries in transition and the last section addressing the priorities of the most industrially-develop... countries, who have, by and large, long since solved the sorts of ergonomics problems currently of concern in the under-developed world. In between these, in a roughly hierarchical arrangement from micro- to macro- levels of analysis, are sections which collectively help span the whole field of ergonomics. Section overviews are provided to outline the topics included in each section.

  • Mechatronics '98

    • 1 Edición
    • J. Adolfsson + 1 más
    • Inglés
    Mechatronics, a synergistic combination of mechanical, electronic and computing engineering technologies, is a truly multidisciplinary approach to engineering. New products based on mechatronic principles are demonstrating reduced mechanical complexity, increased performance and often previously impossible capabilities. This book contains the papers presented at the UK Mechatronics Forum's 6th International Conference, held in Skövde, Sweden, in September 1998. Many of these high-quality papers illustrate the tremendous influence of mechatronics on such areas as manufacturing machinery, automotive engineering, textiles manufacture, robotics, and real-time control and vision systems. There are also papers describing developments in sensors, actuators, control and data processing techniques, such as fuzzy logic and neural networks, all of which have practical application to mechatronic systems.

  • Light-Weight Materials for Transportation and Batteries and Fuel Cells for Electric Vehicles

    • 1 Edición
    • Volumen 71
    • R. Ciach + 5 más
    • Inglés
    This hardbound volume covers Symposia J 'Light-Weight Materials for Transportation' and E 'Material Aspects for Electric Vehicles including Batteries and Fuel Cells' which were presented at the combined 1997 International Conference on Applied Materials/European Materials Research Society Spring meeting (ICAM'97/E-MRS'97) held in Strasbourg (France) from 16-20 June 1997. Modern materials are the basis for further progress in industry and in our life. Among them the light-advanced materials with desired ratios of weight/properties and cost/properties are of special value for transportation for almost all applications. Progress in this area depends on cooperation and development of metallurgy, casting and solidification techniques, plastic and superplastic deformation, heat and surface treatment. When dealing with common alloys there are well-defined materials with a wide data base available. However, designing materials based on composites still requires thorough research in order to establish data bases to avoid not only high costs, but also inefficient designs and less than optimal structures. But, however difficult and problematic the composites are they bear the inherent potential of new materials. Materials science in the field of light materials is now transforming from an empirical approach to a more quantitative scientific stage. The revolution in materials has begun with the emergence of supercomputer simulation and computer-enhanced quantitative microscopic image analysis.The advanced materials applied previously in the defence and aerospace area should expand over the commercial market including air transportation and civil engineering. The new generation of modern cars and trains as well as aircraft (Boeing 777) are good examples for the application of new materials.

  • Practical Guide to Low Voltage Directive

    • 1 Edición
    • Gregg Kervill
    • Inglés
    Compliance with the Low Voltage Directive (LVD) is now essential for CE marking. Products cannot leave your firm without it. This book provides essential and informative reading for company directors, engineers, designers and students designing, manufacturing or studying the design of electrical products covered by the Low Voltage Directive. Unlike many textbooks that offer general guidance only this book provides illustrated examples of non-compliant products and suggests solutions. It also provides detailed guidance notes to EN60950 - one of the most widely used harmonised standards. Gregg Kervill is an international consultant on European regulations and North American product safety standards. His clients include blue chip and Fortune 500 companies as well as Government agencies. Gregg Kervill advises his clients on self-declaration of the Low Voltage Directive.

  • Electronic Classics

    Collecting, Restoring and Repair
    • 1 Edición
    • Andrew Emmerson
    • Inglés
    Vintage Radio, Television and Hi-Fi are highly popular 'modern antiques' - and offer the added challenge for restorers of the repair of classic valve-based circuits. This highly readable book encompasses all aspects of buying, collecting, restoring, repairing, sourcing parts, professional services, clubs and societies, etc. Covering the technical side as well as collecting, this book offers the most comprehensive coverage available. The first half of the book deals primarily with technical aspects of restoration, what components are needed and where they can be found. The second half of the book provides a wealth of useful information: names and addresses of clubs and societies, auctions and antique fairs; a professional services directory; how to get hold of service data. Armed with this book the enthusiast will be able to tackle the restoration of a vintage machine with confidence.

  • Advances in Imaging and Electron Physics

    • 1 Edición
    • Volumen 103
    • Peter W. Hawkes
    • Inglés
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Practical Transformer Handbook

    for Electronics, Radio and Communications Engineers
    • 1 Edición
    • Irving Gottlieb
    • Inglés
    Practical Transformer Handbook shows how a transformer can be put to use, common problems which a user will face, and which is the most appropriate in a particular situation. Anyone working with transformers will find this a valuable user guide. Theory and mathematics are kept to a minimum, and instead the everyday working of these devices is described. Practical Transformer Handbook covers transformers in electronic technology, control techniques, instrumentation, and other more unusual applications. In this practical book a wide range of devices, uses and problems are explored, from parametric transformers, transmission line RF transformers and Tesla coils to the effect of geomagnetic storms on power transformers and dealing with the ever-present third harmonic in iron core transformers. Irving Gottlieb is a leading author of many books for practising engineers, technicians and students of electronic and electrical engineering.

  • Power Electronics Design Handbook

    Low-Power Components and Applications
    • 1 Edición
    • Nihal Kularatna
    • Inglés
    Power Electronics Design Handbook covers the basics of power electronics theory and components while emphasizing modern low-power components and applications. Coverage includes power semiconductors, converters, power supplies, batteries, protection systems, and power ICs. One of the unique features of the Power Electronics Design Handbook is the integration of component and system theory with practical applications, particularly energy-saving low-power applications. Many chapters also include a section that looks forward to future developments in that area. References for further information or more in-depth technical reading are also included. Nihal Kularatna is a principal research engineer with the Arthur C. Clarke Foundation in Sri Lanka. He is also the author of Modern Electronic Test and Measuring Instruments, published by the Institute of Electrical Engineers.

  • Simple, Low-cost Electronics Projects

    • 1 Edición
    • Fred Blechman
    • Inglés
    Fred's explanations are clear, readable, and friendly. Each project comes with a complete discussion of circuit theory, circuit board and parts placement layouts, excellent hints on building and testing each circuit, suggestions for packaging, and a complete parts list. Few things are as satisfying as when an electronic device you built yourself comes to life when you flip the "On" switch. You're guaranteed success with this essential book on your workbench!

  • Underwater Wet Welding and Cutting

    • 1 Edición
    • Gyoujin Cho
    • Inglés
    The proceedings of an international seminar organised by TWI in conjunction with the Paton Welding Institute, Ukraine and held at TWI Middlesbrough in April 1997. The delegates examined recent theoretical and practical developments of the materials, equipment and processes involved.

  • Micro Mechanical Systems

    Principles and Technology
    • 1 Edición
    • Volumen 6
    • T. Fukuda + 1 más
    • Inglés
    In ten sections this book describes the principles and technology of Micro Mechanical Systems. Section one is a general introduction to the historical background and the parallels to microelectronics, reviewing the motivation for microsystems, and discussing microphysics and design and the evolution from microcomponents to microsystems. Section two covers the areas of photolithographic microfabrication, basic concepts of planar processing, materials, and processes. Section three looks at micromachining by machine tools, its history, basic principles and preparation methods. Section four discusses tribological aspects of microsystems. Section five covers fabrication, performance and examples of silicon microsensors. Section six looks at electric and magnetic micro-actuators for micro-robots. Section seven covers energy source and power supply methods. Section eight covers controlling principles and methods of micro mechanical systems and section nine gives examples of microsystems and micromachines. The final section discusses the future problems and outlook of micro mechanical systems.

  • AVR RISC Microcontroller Handbook

    • 1 Edición
    • Claus Kuhnel
    • Inglés
    The AVR RISC Microcontroller Handbook is a comprehensive guide to designing with Atmel's new controller family, which is designed to offer high speed and low power consumption at a lower cost. The main text is divided into three sections: hardware, which covers all internal peripherals; software, which covers programming and the instruction set; and tools, which explains using Atmel's Assembler and Simulator (available on the Web) as well as IAR's C compiler.

  • Tribology for Energy Conservation

    • 1 Edición
    • Volumen 34
    • L. Flamand + 7 más
    • Inglés
    The 24th Leeds-Lyon Symposium was held in London from 4th-6th September 1997, where it was hosted by the Imperial College of Science, Technology and Medicine.The meeting addressed the topic of "Tribology for Energy Conservation" and attracted a wide range of stimulating papers and speakers. Some 150 delegates from nineteen countries attended and about sixty papers were presented in fifteen sessions. These covered the topics of lubricants, wear, friction reduction, hydrodynamics, elastohydrodynamic lubrication, surface roughness, manufacturing, component life (including condition monitoring), and automotive aspects.

  • Stability and Ductility of Steel Structures

    • 1 Edición
    • T. Usami + 1 más
    • Inglés
    The near-field earthquake which struck the Hanshin-Awaji area of Japan before dawn on January 17, 1995, in addition to snatching away the lives of more than 6,000 people, inflicted horrendous damage on the region's infrastructure, including the transportation, communication and lifeline supply network and, of course, on buildings, too. A year earlier, the San Fernando Valley area of California had been hit by another near-field quake, the Northridge Earthquake, which dealt a similarly destructive blow to local infrastructures. Following these two disasters, structural engineers and researchers around the world have been working vigorously to develop methods of design for the kind of structure that is capable of withstanding not only the far-field tectonic earthquakes planned for hitherto, but also the full impact of near-field earthquake.Of the observed types of earthquake damage to steel structures, there are some whose causes are well understood, but many others continue to present us with unresolved problems. To overcome these, it is now urgently necessary for specialists to come together and exchange information.The contents of this volume are selected from the Nagoya Colloquium proceedings will become an important part of the world literature on structural stability and ductility, and will prove a driving force in the development of future stability and ductility related research and design.

  • The Art and Science of Analog Circuit Design

    • 1 Edición
    • Jim Williams
    • Inglés
    In this companion text to Analog Circuit Design: Art, Science, and Personalities, seventeen contributors present more tutorial, historical, and editorial viewpoints on subjects related to analog circuit design. By presenting divergent methods and views of people who have achieved some measure of success in their field, the book encourages readers to develop their own approach to design. In addition, the essays and anecdotes give some constructive guidance in areas not usually covered in engineering courses, such as marketing and career development.

  • Electronics Calculations Data Handbook

    • 1 Edición
    • Daniel McBrearty
    • Inglés
    Electronics Calculations Data Handbook is a unique handbook consisting of tables compiled as a labour-saving aid for electronics engineers, designers and technicians. The layout and content of these is designed to make them easy to use, and to contain the most valuable but tough to calculate information. Daniel McBrearty compiled this book as a result of bitter experience as an analog designer, initially prototyping and testing the ideas of other folk, and seeking to make those little changes that can make the difference between a good and really excellent circuit, and later doing the whole thing himself. If you don't know off the top of your head the best pair of E24 resistors to make an inverting op-amp stage of 18dB gain (and who does?) then this book will save you hours and protect your sanity in a world in which your calculator always goes missing, and you've forgotten the formula.

  • Understand Amplifiers

    • 1 Edición
    • Owen Bishop
    • Inglés
    Understand Amplifiers is a readable introduction for those with little previous knowledge of the subject. The theme of amplification is central to many branches of electronics. Consequently there is a large and confusing array of amplifier types intended for a wide range of applications. This book describes amplifier types, how they work, their properties, advantages and disadvantages, and applications. Amplifiers are treated with the minimum of mathematics and lots of illustrations. Owen Bishop is a prolific author of books for those interested in electronics, including experimenters, students and practising engineers.

  • Case Studies in Engineering Design

    • 1 Edición
    • Cliff Matthews
    • Inglés
    A multidisciplinary introduction to engineering design using real-life case studies.Case Studies in Engineering Design provides students and practising engineers with many practical and accessible case studies which are representative of situations engineers face in professional life, and which incorporate a range of engineering disciplines. Different methodologies of approaching engineering design are identified and explained prior to their application in the case studies. The case studies have been chosen from real-life engineering design projects and aim to expose students to a wide variety of design activities and situations, including those that have incomplete, or imperfect, information. This book encourages the student to be innovative, to try new ideas, whilst not losing sight of sound and well-proven engineering practice.

  • Practical Process Control

    • 1 Edición
    • Anthony Seal
    • Inglés
    Practical Process Control introduces process control to engineers and technicians unfamiliar with control techniques, providing an understanding of how to actually apply control in a real industrial environment. It avoids analytical treatment of the numerous statistical process control techniques to concentrate on the practical problems involved. A practical approach is taken, making it relevant in virtually all manufacturing and process industries. There is currently no information readily available to practising engineers or students that discusses the real problems and such material is long overdue.

  • Advances in Adaptive Computational Methods in Mechanics

    • 1 Edición
    • Volumen 7
    • P. Ladeveze + 1 más
    • Inglés
    Mastering modelling, and in particular numerical models, is becoming a crucial and central question in modern computational mechanics. Various tools, able to quantify the quality of a model with regard to another one taken as the reference, have been derived. Applied to computational strategies, these tools lead to new computational methods which are called "adaptive". The present book is concerned with outlining the state of the art and the latest advances in both these important areas.Papers are selected from a Workshop (Cachan 17-19 September 1997) which is the third of a series devoted to Error Estimators and Adaptivity in Computational Mechanics. The Cachan Workshop dealt with latest advances in adaptive computational methods in mechanics and their impacts on solving engineering problems. It was centered too on providing answers to simple questions such as: what is being used or can be used at present to solve engineering problems? What should be the state of art in the year 2000? What are the new questions involving error estimators and their applications?

  • Building Intelligent Agents

    An Apprenticeship, Multistrategy Learning Theory, Methodology, Tool and Case Studies
    • 1 Edición
    • Gheorghe Tecuci
    • Inglés
    Building Intelligent Agents is unique in its comprehensive coverage of the subject. The first part of the book presents an original theory for building intelligent agents and a methodology and tool that implement the theory. The second part of the book presents complex and detailed case studies of building different types of agents: an educational assessment agent, a statistical analysis assessment and support agent, an engineering design assistant, and a virtual military commander. Also featured in this book is Disciple, a toolkit for building interactive agents which function in much the same way as a human apprentice. Disciple-based agents can reason both with incomplete information, but also with information that is potentially incorrect. This approach, in which the agent learns its behavior from its teacher, integrates many machine learning and knowledge acquisition techniques, taking advantage of their complementary strengths to compensate for each others weakness. As a consequence, it significantly reduces (or even eliminates) the involvement of a knowledge engineer in the process of building an intelligent agent.

  • VCR Troubleshooting and Repair

    • 3 Edición
    • Robert Brenner + 1 más
    • Inglés
    The labor costs of even a minor VCR repair are very high, and warranties typically only cover the first 90 days of ownership. The first four chapters of this practical guide allow do-it-yourselfers to take charge of maintaining and repairing their own VCRs for optimum performance. Basic VCR and recording principles are explained so you can gain a better understanding of how your machine operates. Advanced troubleshooting techniques covered in the later chapters allow technicians and advanced hobbyists to make more complex repairs and adjustments. Basic troubleshooting guidelines and flow charts aid in diagnosis, including chassis and mechanical failures. VCR Troubleshooting & Repair, focuses on preventative maintenance. Basic electronics principles are presented as they relate to VCR performance. THE AUTHORSGregory R. Capelo is the owner of a VCR and VTR repair facility in El Cajon, California. He has serviced broadcast, consumer, and industrial video equipment for more than 14 years. He has taught numerous technical courses to private, government, and industrial technicians on the theory and maintenance of video and television equipment. Currently a trainer for Panasonic, he has been an expert witness in VCR patent infringement cases.Robert C. Brenner is an engineer and lecturer with extensive experience in microcomputers and system repair. He has written several successful books, including earlier editions of VCR Troubleshooting and Repair.

  • Tribology of Miniature Systems

    • 1 Edición
    • Z. Rymuza
    • Inglés
    The tribology of miniature systems is quite different from the tribology of large machinery. This is the first publication to cover on an academic level both the basic concepts of the tribology of miniature systems and some areas of its practical application. A comprehensive survey is given on the specific problems encountered in this field, providing a volume that will be useful in solving professional engineering problems in the fast growing field of precision engineering and microtechnology.The suitability of various materials and lubricants for the tribological systems in miniature mechanisms is discussed. The tribological properties and the friction and wear properties which occur in such systems are analysed. Specific lubrication problems are examined in detail; in particular, the use of special tribological coatings to solve many difficult lubrication problems and to obtain high wear resistance of the rubbing elements is considered. The special investigation techniques used to characterize miniature tribological systems and their elements (e.g. lubricants) are reviewed. The tribological aspects of many of the most common assemblies found in miniature mechanism and electromechanism design are analysed and some practical suggestions are put forward for the rational design of such systems. Also special tribological problems such as those met in computer technology, bioengineering, etc. are presented. The book is intended for tribologists (both seasoned researchers and newcomers) studying the problems of this specific branch of tribology and also for practising engineers active in the design, manufacture and exploitation of various miniature systems.

  • ATM and Internet Protocol

    • 1 Edición
    • M. Bentall + 2 más
    • Inglés
    Asynchronous Transfer Mode (ATM) is a protocol that allows data, sound and video being transferred between independent networks via ISDN links to be supplied to, and interpreted by, the various system protocols. ATM and Internet Protocol explains the working of the ATM and B-ISDN network for readers with a basic understanding of telecommunications. It provides a handy reference to everyone working with ATM who may not require the full standards in detail, but need a comprehensive guide to ATM. A substantial section is devoted to the problems of running IP over ATM and there is some discussion of Frame Relay.

  • Reliability and Failure of Electronic Materials and Devices

    • 1 Edición
    • Milton Ohring
    • Inglés
    Suitable as a reference work for reliability professionals or as a text for advanced undergraduate or graduate students, this book introduces the reader to the widely dispersed reliability literature of microelectronic and electronic-optional devices. Reliability and Failure of Electronic Materials and Devices integrates a treatment of chip and packaging level failures within the context of the atomic mechanisms and models used to explain degradation, and the statistical handling of lifetime data. Electromigration, dielectric radiation damage and the mechanical failure of contacts and solder joints are among the failure mechanisms considered. An underlying thread of the book concerns product defects--their relation to yield and reliability, the role they play in failure, and the way they are experimentally exposed.The reader will gain a deeper physical understanding of failure mechanisms in electronic materials and devices, acquire skills in the mathematical handling of reliability data, and better appreciate future technology trends and the reliability issues they raise.

  • SiC Materials and Devices

    • 1 Edición
    • Volumen 52
    • Inglés
    This volume addresses the subject of materials science, specifically the materials aspects, device applications, and fabricating technology of SiC.

  • Electrical Installations in Hazardous Areas

    • 1 Edición
    • Alan McMillan
    • Inglés
    The Health and Safety at Work Act, together with current and impending EU Directives, obliges those responsible for hazardous areas, those who work in such areas and those who supply equipment for use in such areas to demonstrate that they have taken all necessary and reasonable steps to prevent fires and explosions. This book addresses these issues, seeks to explain the ever increasing complexity of standards and codes pertaining to this field and describes their method of application and the application of other procedures to assist those involved.

  • Advances in Heat Transfer

    Transport Phenomena in Crystal Growth
    • 1 Edición
    • Volumen 30
    • Inglés

  • Fault Detection, Supervision and Safety for Technical Processes 1997, (3-Volume Set)

    • 1 Edición
    • J. Chen + 1 más
    • Inglés
    SAFEPROCESS '97 was the third in this major IFAC symposia series and covered a wide range of theoretical and application studies concerned with the reliability, availability and safety of controlled systems.The goal of the symposium was to bring together experts from different fields to give an overview of the state-of-the-art, present new research results and show future developments. In addition, there was special emphasis on industrial requirements for FDI (fault detection and isolation) and a new session on the human factors aspects of system monitoring and safety that reflects the growing interest in this area.These proceedings contain the 209 papers presented at the symposium and comprise: plenary overviews; state-of-the-art reviews and surveys; the very latest results; and tutorial papers.

  • Rheology: An Historical Perspective

    • 1 Edición
    • Volumen 7
    • R.I. Tanner + 1 más
    • Inglés
    The science of rheology remains a mystery to most people, even to some scientists. Some respectable dictionaries have been quite cavalier in their attitude to the science, the small Collins Gem dictionary, for example, being quite happy to inform us that a Rhea is an three-toed South American ostrich, whilst at the same time offering no definition of rheology. This maybe due to the fact that the science is interdisciplinary and does not fit well into any one of the historical disciplines.This book contains an in-depth study of the history of rheology, beginning with the statements of Heraclitus, Confucius and the prophetess Deborah. It also emphasises the distinctive contributions of Newton, Hooke, Boltzmann, Maxwell, Kelvin and others, and culminates in the flourishing activity in the second half of this century.Features of this book:• Is the only book on the subject• Prevents the rediscovery of results already made• Will educate newcomers to the field to the rich heritage in even a relatively recent science like rheology.The book will be invaluable for science and scientific history libraries and will also be of interest to rheologists, and scientists working in the polymer processing, food, lubrication, detergent and similar industries.

  • Simplified Design of Microprocessor-Supervisory Circuits

    • 1 Edición
    • John Lenk
    • Inglés
    This is the seventh book in the popular Simplified Design series from John Lenk, which teaches engineers, technicians, and students to use and modify off-the-shelf ICs to suit their individual design needs. The first chapter of this book describes the basic operation of microprocessor supervisory circuits and how to use manufacturer data sheets to make your component selections. Later chapters describe the internal operations of various commonly-available ICs and how to select and modify them. The most common microprocessor-super... functions include: power-on reset, low-voltage reset for glitch and brownout, memory-write protection, power-fail warning, battery backup switchover, and watchdog timer. While these functions are not difficult to implement individually, they can be complex in combination, particularly when there are space limitations. Simplified Design of Microprocessor-Super... Circuits will allow designers to evaluate tradeoffs and features more easily and quickly.

  • Servicing Satellite TV Equipment

    • 1 Edición
    • Nick Beer
    • Inglés
    This is the definitive practical guide to fault-finding, troubleshooting and servicing satellite television equipment, both indoors and outdoors. It will take you through all areas of satellite television system servicing from the simplest fixed dish to fully motorised systems. From PAL to Mac to MPEG all contemporary systems are covered. Satellite TV systems have been installed in a wide variety of locations, using a bewildering range of equipment. That equipment is beginning to need maintenance and repair. To cope with the volume and variety of work, Nick Beer has written the first guide to satellite TV which concentrates on what to look for and what to do when it goes wrong. This book is up to date and crammed with real-life experience, not theoretical data or manufacturer's ideal specs. Nick Beer has already written the best-selling Servicing Audio and Hi-fi Equipment and is a technical correspondent for many UK and international journals such as Television. He also works as an engineer and teaches satellite servicing to technicians.

  • Electrical Interference Handbook

    • 2 Edición
    • NORMAN ELLIS
    • Inglés
    The Directive on EMC, and others affecting the electrical and electronics industry, are now firmly in place. In this updated guide the causes, effects and penalties of electrical interference are explained. Remedies such as methods of minimising emissions and maximising immunity are surveyed. This handbook gives an insight into the various national and international standards and test methods. Case studies illustrate the challenge in various major industrial sectors including buildings, domestic appliances and white goods, IT, transport and automotive, lighting, medical equipment and security.

  • EMC at Component and PCB Level

    • 1 Edición
    • Martin O 'Hara
    • Inglés
    This book provides the knowledge and good design practice for the design or test engineer to take the necessary measures to improve EMC performance and therefore the chance of achieving compliance, early on in the design process.There are many advantages for both the component supplier and consumer, of looking at EMC at component and PCB level. For the suppliers, not only will their products have the competitive edge because they have known EMC performance, but they will be prepared should EMC compliance become mandatory in the future. For consumers it is a distinct advantage to know how a component will behave within a system with regard to EMC.

  • Introduction to Digital Electronics

    • 1 Edición
    • J. Crowe + 1 más
    • Inglés
    This text takes the student from the very basics of digital electronics to an introduction of state-of-the-art techniques used in the field. It is ideal for any engineering or science student who wishes to study the subject from its basic principles as well as serving as a guide to more advanced topics for readers already familiar with the subject. The coverage is sufficiently in-depth to allow the reader to progress smoothly onto higher level texts.

  • Introduction to Power Electronics

    • 1 Edición
    • D. Fewson
    • Inglés
    Building on solid state device and electromagnetic contributions to the series, this text book introduces modern power electronics, that is the application of semiconductor devices to the control and conversion of electrical power. The increased availability of solid state power switches has created a very rapid expansion in applications, from the relatively low power control of domestic equipment, to high power control of industrial processes and very high power control along transmission lines.This text provides a comprehensive introduction to the entire range of devices and examines their applications, assuming only the minimum mathematical and electronic background. It covers a full year's course in power electronics. Numerous exercises, worked examples and self assessments are included to facilitate self study and distance learning.

  • Designus Maximus Unleashed!

    • 1 Edición
    • Clive Maxfield
    • Inglés
    Designus Maximus Unleashed! is more than a collection of article reprints; in this book, the original (unedited) text is revisited, along with new insights and previously unpublished material, all presented in the author's distinctive personal style. The accompanying CD-ROM includes a fully-functioning virtual computer, as well as BOOL Logic Synthesis, MMLogic Multimedia Logic Design System, and Analog Magic.Clive Maxfield, a popular columnist, has collected his articles in a new order, grouped by topic, and expanded from the limits of magazine space. These articles have been published in magazines such as EDN, Electronic Design, and Electronic Design & Technology. In addition, he includes new material such as the history of computing, logic design tools, and the virtual computer. Two chapters of personal perspective begin and end the text.Clive 'Max' Maxfield received his B.SC. in Control Engineering from Sheffield Polytechnic (now Sheffield Hallam University), England, and began his career as a mainframe CPU designer. He is currently a Member of the Technical Staff at Intergraph Computer Systems, Huntsville AL. In his spare time, Max is a contributing editor to EDN magazine and a member of the advisory board to the Computer History Association of California. In addition to numerous technical articles and papers, Max is also the author of Bebop to the Boolean Boogie and the co-author of Bebop BYTES Back (An Unconventional Guide to Computers).

  • Debugging Embedded Microprocessor Systems

    • 1 Edición
    • Stuart Ball
    • Inglés
    Debugging Embedded Microprocessor Systems provides techniques for engineers, technicians, and students who need to correct design faults in embedded systems. Using real-world scenarios, designers can learn practical, time-saving ways to avoid and repair potentially costly problems. Prevention is stressed. In this book, the author addresses hardware and software issues, including up-front design techniques to prevent bugs and contain design creep. Practical advice includes descriptions of common tools which can be used to help identify and repair bugs, as well as test routines. RTOS and embedded PC environments are also covered. Each chapter of Debugging Embedded Microprocessor Systems opens with an example design problem which illustrates real-world issues such as design changes, time pressures, equipment or component availability, etc. Case studies of past debugging projects are presented in the final chapter.

  • Robot Control 1997

    2-Volume Set
    • 1 Edición
    • M. Guglielmi
    • Inglés
    Held from 3-5 September 1997 in Nantes, France, this was the fifth of the IFAC series of triennial Symposia on Robot Control. The final selection lead to 126 papers (from 200 submissions) in the Technical Program. This consisted of 33 sessions disposed in 3 parallel tracks and brought together contributions from 298 leading researchers. The papers covered a range of topics relevant to the field of robot control, including modelling and identification, force and compliance control, robot control techniques, vision control, grasp control, flexible robots, non holonomic robotic systems, walking robots, control design and architectures, teleoperation, and underwater robots. The Symposium featured three invited plenary speakers: Professor Steven Dubowsky, from Massachusetts Institute of Technology presented a lecture entitled 'A perspective of the advancement of robotic systems during the past 15 years'; Professor Shanakr Sastry, from the University of California, presented a lecture entitled 'Air Traffic Management Systems: at the intersection of Control Theory and Robotics'; and Professor Friedrich Pfeiffer, from the Technical University of München, presented a lecture entitled 'Robots with unilateral constraints'.

  • Basic Radio

    Principles and Technology
    • 1 Edición
    • Ian Poole
    • Inglés
    Basic Radio is a wide ranging introduction to the principles of radio waves, transmission and reception, and to the technologies of broadcasting, satellite and personal communications. As well as being a textbook for vocational courses such as City & Guilds and BTEC Ian Poole's book is essential reading for all communications and broadcast professionals.Radio technology is becoming increasingly important in today's highly sophisticated electronics industry. There are traditional uses including broadcasting and point to point communications, as well as new technologies associated with cellular phones and wire-less data links. All of these developments mean that there will be a greater need for radio engineers at all levels.Ian Poole is an electronic engineer currently involved in project management for the development of a large radio system. He is a regular contributor to Electronic - The Maplin Magazine, Everyday Practical Electronics and Practical Wireless. He has also written several books on amateur radio.

Temas relacionados