Saltar al contenido principal
Elsevier

Libros en Ingeniería y Tecnología

  • A Short Course in Foundation Engineering

    • 1 Edición
    • N.E. Simons + 1 más
    • Inglés
    A Short Course in Foundation Engineering discusses methods for predicting the failure loads, and the deformations at working loads, of piled and non-piled foundations. The first chapter covers the definition, principle, and computation of effective stress. Chapter 2 discusses the nature and measurement of shear stress. Chapter 3 deals with the concerns in immediate settlements, such as elastic stress distributions, heave of excavations, and estimates of undrained modulus. Chapter 4 tackles the bearing capacity of footings, while Chapter 5 talks about settlement analysis. The last chapter covers piled foundations. The book will be of great use to civil engineers who wish to have a better understanding of foundation engineering.

  • Physicochemical Hydrodynamics

    An Introduction
    • 1 Edición
    • Ronald F. Probstein
    • Howard Brenner
    • Inglés
    Physicochemical Hydrodynamics: An Introduction aims to provide an introduction to physicochemical hydrodynamics (PCH), which deals with the interaction between fluid flow and physical, chemical, and biochemical processes. PCH has applications in many areas of science and technology and is a rapidly expanding field. Emphasis of this book is on rational theory and its consequences, with the purpose of showing the underlying unity of PCH, in which diverse phenomena can be described in physically and mathematically similar ways. The magic of this unity is shown in the similar manner in which solutes concentrate in a flow containing chemically reacting surfaces, reverse osmosis membranes, and electrodialysis membranes or the similarity of particle motions in sedimentation, centrifugation, ultrafiltration, and electrophoresis. Problems are included at the end of each chapter and are ordered following the sequence in which the material is set out. The questions range in difficulty, with most requiring an analytic development, but with some asking only for a descriptive answer. All problems are intended to illustrate the ideas presented, though often the solution goes beyond the explicit discussion in the book, with the answer constituting a generalization or extension of the text material. This book is an essential source of information for students majoring in the field of PCH.

  • Introduction to Hydrometeorology

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • J. P. Bruce + 1 más
    • Inglés
    Introduction to Hydrometeorology is the study of the hydrolic cycle, which is the circulation of water from the seas, into the atmosphere, and back to either land or sea. This book describes hydrometeorology or the application of meteorology to problems that pertain to hydrology, and then discusses the approach, through meteorology, to the solution of hydrologic problems. This text outlines observation methods on the subject and discusses the applications of hydrometeorology to problems encountered in the study of river and lake behaviors. Topics include precipitation, melting of ice, streamflows, lakes, evaporation, and evapotranspiration. The frequently used methods in analysis, such as employing statistics to hydrometereological problems, precipitation analysis, and streamflow routing are explained. This text also shows how extending streamflow records can be helpful in predicting the regime or course of a stream in the future. Records of seasonal and annual flow, flood runoff, peak discharge, as well as seasons of low flow and drought become useful tools in estimating the frequency and magnitude of streamflows. After which, the book discusses possible engineering designs in irrigation, storm sewers, and reservoirs. The text looks into the ways how human has influenced the hydrologic cycle through induced precipitation, melting of ice covers, and urbanization. Lastly, some climactic trends and cycles that bring about climate change and water resource development are discussed. This text can be used by students studying hydrology and those with meteorology majors. This book can also be read by meteorologists, environmentalists, and people working in general earth sciences.

  • Structural Concrete

    Materials; Mix Design; Plain, Reinforced and Prestressed Concrete; Design Tables
    • 1 Edición
    • C. B. Wilby
    • Inglés
    Structural Concrete discusses the design and analysis of reinforced and prestressed concrete structural components and structures. Each of the eight chapters of the book tackles a specific area of concern in structural concrete. The text first deals with the serviceability and safety, and then proceeds to the properties of materials and mix designs. The next two chapters cover reinforced concrete beams and slabs. Chapter 5 discusses column and walls, while Chapter 6 tackles reinforced concrete frames and continuous beams and slabs. The next chapter discusses design structures, while the last chapter covers prestressed concrete. The text will be of great use to undergraduate students of civil and structural engineering. Professionals whose work involves concrete technology will also find the book useful.

  • Plasticity

    Proceedings of the Second Symposium on Naval Structural Mechanics
    • 1 Edición
    • E. H. Lee + 1 más
    • Inglés
    Plasticity documents the proceedings of the Second Symposium on Naval Structural Mechanics held at Brown University, Rhode Island, 5-7 April 1960. It was sponsored jointly by the Office of Naval Research of the U.S. Navy and Brown University. The symposium was devoted to plasticity. The intention was to provide critical reviews of recent developments in certain areas of plasticity of particular current interest and importance, and to supplement these with short accounts of related current research work. The papers presented at the symposium covered the following areas: atomic theory of plastic flow and fracture; stress-strain relations including thermoplasticity and creep; basic theory including stability and uniqueness; boundary value problems including plates and shells; dynamic loading and plastic waves; and developments in design. Two talks were also held for the purpose of reviewing the present status of application of plasticity in design of naval vessels. The symposium was opened by Captain J. C. Myers on behalf of the Office of Naval Research and by Professor W. Prager on behalf of Brown University. Professor Prager closed the symposium by presenting a brief resume of the main accomplishments and trends in plasticity brought to light during the symposium.

  • Turbine Main Engines

    The Commonwealth and International Library: Marine Engineering Division
    • 1 Edición
    • John B. Main + 2 más
    • A. J. S. Bennett
    • Inglés
    Turbine Main Engines deals with the principle of operation of turbine main engines. Topics covered include practical considerations that affect turbine design and efficiency; steam turbine rotors, blades, nozzles, and diaphragms; lubricating oil systems; and gas turbines for use with nuclear reactors. Gas turbines for naval boost propulsion, merchant ship propulsion, and naval main propulsion are also considered. This book is divided into three parts and begins with an overview of the basic mode of operation of the steam turbine engine and how it converts the pressure energy of the ingoing steam into equivalent kinetic energy. The second part deals with the principle of operation of marine gas turbines and discusses the effect of pressure and temperature on turbine performance; creep of turbine components; fouling of compressors and turbines; and control systems and protective devices. The final part describes free piston-gas turbine machinery and looks at different types of free piston engine, together with turbine fouling and washing procedure. This monograph will be of interest to mechanical engineers and those involved in turbine operation and design.

  • The Newnes Guide to Home Electrics

    • 2 Edición
    • Geoffrey Burdett
    • W. Turner
    • Inglés
    Home Electrics, Second Edition provides a do-it-yourself (DIY) guide to residential electric systems. The book is comprised of 15 chapters that cover the different aspects of home electrics. The topics covered in the text include electrical installation, rewiring, power circuits, electrical hardware, electrical repairs, tools, and safety. The book also discusses a specific area or function of home electronics, such as lighting system, lamps, electric cookers, and outdoor electrical extension. The book will be of great use to individuals interested in learning how to conduct proper home electrical installation and maintenance.

  • Engineering Surveying

    Theory and Examination Problems for Students
    • 3 Edición
    • W. Schofield
    • Inglés
    Engineering Surveying: Theory and Examination Problems for Students, Volume 1, Third Edition discusses topics concerning engineering surveying techniques and instrumentations. The book is comprised of eight chapters that cover several concerns in engineering survey. Chapter 1 discusses the basic concepts of surveying. Chapter 2 deals with simple and precise leveling, while Chapter 3 covers earthworks. The book also talks about the theodolite and its applications, and then discusses optical distance measurement. Curves, underground and hydrographic surveying, and aspects of dimensional control on site are also examined. The text will be useful to both students and practitioners of civil engineering.

  • Modest Technologies for a Complicated World

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1 Edición
    • Roberto Vacca
    • Inglés
    Modest Technologies for a Complicated World focuses on intermediate or alternative technologies capable of making our complex society more rational, simpler, and more modest through the attainment of equilibrium in the socio-political situation and also in the demographic, energy, agricultural, soil preservation, exploitation of resources, and recycling processes. This book outlines the conditions that must be satisfied and the precautions that have to be taken in order to implement modest technological innovations in the third world—as well as in the first or the second—on the basis of concrete and pragmatic evaluations. This volume is comprised of 14 chapters and begins with a historical overview of modest technology and how it can address global problems such as food shortage and malnutrition. The role of modest technologies as instruments of international aid and in promoting a possible New International Economic Order is then discussed. The following chapters consider the debate concerning the neutrality of science and technology; lack of innovation as a cause of economic crisis; and arguments about the theory and practice of international activities of technological cooperation and assistance. Strategies for the introduction of modest technologies are also proposed. This book will be of interest to sociologists, economists, and decision makers.

  • Fluid Mechanics

    Volume 6
    • 1 Edición
    • L D Landau + 1 más
    • Inglés
    Course of Theoretical Physics, Volume 6: Fluid Mechanics discusses several areas of concerns regarding fluid mechanics. The book provides a discussion on the phenomenon in fluid mechanics and their intercorrelations, such as heat transfer, diffusion in fluids, acoustics, theory of combustion, dynamics of superfluids, and relativistic fluid dynamics. The text will be of great interest to researchers whose work involves or concerns fluid mechanics.

  • Environmental Engineering

    • 2 Edición
    • P Aarne Vesilind + 2 más
    • Inglés
    Environmental Engineering, Second Edition is an introductory book on environmental engineering, which includes materials important to environmental engineers: water resources, air quality, solid and hazardous wastes (including radioactive waste), noise, and social and ethical considerations. The text begins with a short introduction on the roots of environmental engineering and presents the concept of risk and safety. The following chapters are devoted to discussions on such topics as sources of water pollution, measurement of water quality, wastewater treatment, quantities and characteristics of municipal solid waste, and solid and hazardous waste law. The types of air pollutants, air pollution control, and noise measurement and control are dealt with in detail as well. The last chapter covers the topic on environmental ethics. This book will be of use to junior or senior level engineering students.

  • Engineering Electromagnetics

    Pergamon Unified Engineering Series
    • 1 Edición
    • David T. Thomas
    • Thomas F. Irvine + 2 más
    • Inglés
    Engineering Electromagnetics presents a bold approach to the teaching of electromagnetics to the electrical engineering undergraduate. This book begins by adopting Maxwell's Equations as the fundamental laws, an approach contrary to the traditional presentation of physical laws in the chronological order of their discovery that starts with Coulomb's Law. The use of Maxwell's Equations provides broad physical laws of general applicability and prevents confusion among students as to when specific laws may be applied. A problem solving or engineering analysis approach is used extensively throughout this text. Real life problems are presented and then reduced to an appropriate model or facsimile for solution. This publication is intended for engineering students at junior or senior level.

  • Engineering

    Its Role and Function in Human Society
    • 1 Edición
    • William H. Davenport + 1 más
    • Inglés
    Engineering: Its Role and Function in Human Society illustrates the historical views held by humanists and technologists with regard to each other, the accomplishments of engineering in the past, and the problems involving laymen and men of science together in their relationships. Some of the topics covered are the aloofness from science and technology; hostility to technology; and acceptance of technology. The book also covers topics on the attitudes of the engineer; the use of engineering in relation to human needs; and engineering as a technological culture. The ultimate use of tools and machines; automation and human condition; pollution and pollutants; and causes of problems in engineering are also encompassed. Engineers and engineering students will find the book invaluable.

  • Handbook of Dehumidification Technology

    • 1 Edición
    • G.W. Brundrett
    • Inglés
    Handbook of Dehumidification Technology is a handbook of dehumidifiers and how they work. This manual describes the principles of dehumidification and looks at the domestic and industrial applications of dehumidifiers, along with design considerations for refrigerant dehumidifiers. The use of dehumidification in swimming pools and for food and flower storage is also discussed. This reference guide is comprised of 11 chapters and begins with an introduction to dehumidification, paying particular attention to how it addresses the problems created by high water vapor content in air. The historical development of air drying and the use of psychrometric charts to describe the state of damp air as well as to illustrate ways of lowering the relative humidity of moist air are also considered. The next chapter presents three methods of removing moisture from air: sorbent dehumidification, refrigerant dehumidification, and air-cycle dehumidification. The reader is also introduced to design considerations for refrigerant dehumidifiers, domestic applications of dehumidifiers, installation of dehumidifiers in a swimming pool, and industrial dehumidification. The final chapter is devoted to additional sources of information on dehumidifiers and dehumidification, including journals, professional bodies, and research. This monograph will be a valuable resource for technicians and others interested in humidity control.

  • Fundamentals of Fluidized-Bed Chemical Processes

    Butterworths Monographs in Chemical Engineering
    • 1 Edición
    • J G Yates
    • J W Mullin
    • Inglés
    Fundamentals of Fluidized-bed Chemical Processes presents a survey of the design, operation, and chemical processes of fluidized-bed reactors. The book is composed of five chapters. The first chapter examines the basic physics of gas-solid fluidization. The second chapter shows how the physics of gas-solid fluidization may be combined with chemical kinetics to generate models of fluidized-bed reactors. Chapters 3 and 4 deal with two major applications of gas-solid fluidization, the Fluidized Catalytic Cracking process and the combustion and gasification of coal. The final chapter analyzes other processes used in the production of chemicals such as phthalic anhydride, acrylonitrile, and compounds of uranium. Undergraduate and postgraduate students of chemical engineering, engineers, chemists, and scientists will find this text useful.

  • Principles of Transistor Circuits

    Introduction to the Design of Amplifiers, Receivers and Digital Circuits
    • 8 Edición
    • S W Amos + 1 más
    • Inglés
    For over thirty years, Stan Amos has provided students and practitioners with a text they could rely on to keep them at the forefront of transistor circuit design. This seminal work has now been presented in a clear new format and completely updated to include the latest equipment such as laser diodes, Trapatt diodes, optocouplers and GaAs transistors, and the most recent line output stages and switch-mode power supplies. Although integrated circuits have widespread application, the role of discrete transistors is undiminished, both as important building blocks which students must understand and as practical solutions to design problems, especially where appreciable power output or high voltage is required. New circuit techniques covered for the first time in this edition include current-dumping amplifiers, bridge output stages, dielectric resonator oscillators, crowbar protection circuits, thyristor field timebases, low-noise blocks and SHF amplifiers in satellite receivers, video clamps, picture enhancement circuits, motor drive circuits in video recorders and camcorders, and UHF modulators. The plan of the book remains the same: semiconductor physics is introduced, followed by details of the design of transistors, amplifiers, receivers, oscillators and generators. Appendices provide information on transistor manufacture and parameters, and a new appendix on transistor letter symbols has been included.

  • Semiconductor Opto-Electronics

    • 1 Edición
    • T.S. Moss + 2 más
    • Inglés
    Semiconductor Opto-Electronics focuses on opto-electronics, covering the basic physical phenomena and device behavior that arise from the interaction between electromagnetic radiation and electrons in a solid. The first nine chapters of this book are devoted to theoretical topics, discussing the interaction of electromagnetic waves with solids, dispersion theory and absorption processes, magneto-optical effects, and non-linear phenomena. Theories of photo-effects and photo-detectors are treated in detail, including the theories of radiation generation and the behavior of semiconductor lasers and lamps. The rest of this text deals with the group IV elements, III-V compounds, and selection of the most important chalcogenides. This publication is intended primarily for physicists engaged in academic research or commercial device development and for honors students specializing in solid-state physics.

  • CIM – Mechanical Aspects

    State of the Art Report
    • 1 Edición
    • Gareth Evans
    • Inglés
    CIM - Mechanical Aspects: State of the Art Report contains different points of view about computer-integrated manufacturing (CIM). This report is organized into three parts: invited papers, analysis, and bibliography. The invited papers part examines various mechanical aspects of CIM. The analysis part assesses the major advances and provides a balanced analysis of the state of the art in CIM. Bibliography compiles the most important published material on the subject of mechanical aspects of CIM.

  • Anglo–American Microelectronics Data 1968–69

    Manufacturers R–Z
    • 1 Edición
    • G.W.A. Dummer + 1 más
    • Inglés
    Anglo-American Microelectronics Data 1968-69, Volume Two: Manufacturers R-Z presents information on the features of the design, construction and application of microelectronic devices. The book discusses the features of the design, construction and application of radiation integrated circuits; Raytheon integrated circuits; RCA integrated circuits; and Signetics integrated circuits. The text also describes the features of the design, construction and application of Siliconix integrated circuits; Sperry integrated circuits; Sprague integrated circuits; and STC thick film circuits. The features of the design, construction and application of Stewart-Warner micro circuits; Sylvania integrated circuits; Texas instruments semiconductor networks; and transitron integrated circuits are also encompassed. The book further tackles the features of the design, construction and application of Varo hybrid film integrated circuits; Welwyn thick film and thin film resistor networks; Westinghouse integrated circuits; and Zeltex hybrid integrated circuits. Designers, buyers, and users of microelectronic devices will find the book useful.

  • Fracture and Fracture Mechanics

    Case Studies
    • 1 Edición
    • R. B. Tait + 1 más
    • Inglés
    Fracture and Fracture Mechanics: Case Studies contains the proceedings of the Second National Conference on Fracture, held at the University of the Witwatersrand in Johannesburg, South Africa on November 26-27, 1984. This book presents case studies in fracture and fracture mechanics and highlights the problems associated with fracture, failure analysis, and safe design in industries as diverse as mining, power generation, transport, petrochemical, and manufacturing. This book has 29 chapters divided into five sections and opens with a discussion on the role of professional complacency in bridge failures. The first section is devoted to failure investigation and covers topics ranging from failure analysis of a hydraulic retarder piston to the use of scanning electron microscopy in investigating tungsten carbide-cobalt fractured components. The second section deals with slow crack growth and considers an approach to assessing structural integrity and fatigue failures in vibrating equipment. Failures arising from repair welding and incomplete heat treatment are described. The remaining chapters explore fitness for purpose evaluation of fractures; the environmental effects of fractures; and case studies of failure prevention in industries such as petrochemical, power generation, and transportation. This monograph will be of interest to structural engineers, metallurgists, and materials scientists and technologists.

  • Powtech '83 Particle Technology

    Event No. 280 of the EFCE
    • 1 Edición
    • Sam Stuart
    • Inglés
    Powtech '83: Particle Technology focuses on the techniques and processes involved in the handling and processing of powders and other related products. The book presents studies that show the composition, characteristics, value, and strength of materials when subjected to different conditions in different environments. Divided into five parts with 32 chapters, the book features the work of contributors who have conducted research on the composition and chemical processes involved in particle technology. The pieces that are presented feature experiments and tests conducted on different materials, such as coal and liquids. These experiments are supported by lengthy discussions coupled with numerical representation to validate the claims of authors in their respective concerns. Although the authors have their own topics to cover, they will manage to capture the interest of physicists, chemists, and mechanical and civil engineers who are interested in particle technology. Taking into consideration the value of information presented in the book, these professionals will find the book a reliable source of data in their profession and in their studies.

  • Scale Models in Engineering

    Fundamentals and Applications
    • 1 Edición
    • Richard I. Emori + 1 más
    • Inglés

  • The Control of Fat and Lean Deposition

    • 1 Edición
    • K.N. Boorman + 2 más
    • Inglés
    The Control of Fat and Lean Deposition is a collection of papers dealing with the methods of influencing fat and lean deposition in whole animals, such as the use of the immune response, the use of exogenously applied materials, transgenesis, or the diet itself. The papers also consider the results of fat manipulation and lean deposition on meat quality to achieve suitabilty for human consumption. Some papers review the hormonal regulation of muscle protein synthesis, degradation, and cell growth, noting that muscle protein turnover involves the regulation of cellular growth and metabolism of the whole body. Another paper investigates the surge in lipid accumulation during fattening, as well as the correlation between changes in flux or enzyme activities in growing animals to changes in lipid accretion. One paper examines the responsiveness of prenatal development of key tissues, such as skeletal tissue and adipose, to nongenetic influences. The paper also analyzes how such responsiveness influence the rate and composition of postnatal growth. Another paper discusses the observation that reducing fat content especially on the muscle tissue itself can adversely affect the eating quality and tenderness of meat. The collection is suitable for veterinarians, livestock growers, and researchers engaged in food processing and preservation.

  • High-Temperature Brazing in Controlled Atmospheres

    The Pergamon Materials Engineering Practice Series
    • 1 Edición
    • G. Sheward
    • D. W. Hopkins + 2 más
    • Inglés
    High Temperature Brazing in Controlled Atmospheres provides a discussion regarding the fundamentals, applications, and the potential of the brazing process. Comprised of eight chapters, the book covers several topics concerning the metallurgical process in brazing. Chapter 1 discusses the general bonding techniques, while Chapter 2 talks about the factors that affect the design of components to be joined by brazing and the theoretical aspects of the process that will influence design. Chapter 3 provides advices about the availability and properties of filler metals used in brazing, while Chapter 4 discusses furnaces. Chapter 5 tackles the atmospheric factors to consider in brazing, and Chapter 6 covers the brazing process itself. Chapter 7 talks about the applications of brazing in various settings, and Chapter 8 deals with quality control. The book will be of great use for technicians, designers, and engineering students or any other professionals whose work involves the brazing process.

  • Control of Ovulation

    • 1 Edición
    • D.B. Crighton + 2 más
    • Inglés
    Control of Ovulation discusses the general principles and practical applications of ovulation control. The book presents 25 papers that cover the basic research practices and practicalities of ovulation control. The materials are grouped according to their respective themes. The first three parts cover the hypothalamus, pituitary gland, and ovary, respectively. The remaining papers discuss concerns regarding the applications of ovulation control, such as ovulation failure; diagnosis of ovulatory disorders; and the induction and synchronization of ovulation. The text will be of great use to practitioners of obstetrics and gynecology in both human and veterinary medicine.

  • Distributed Process Control Report

    • 1 Edición
    • Architecture Technology Architecture Technology Corpor
    • Inglés
    Please note this is a short discount publication.Factory Managers and Production Planners - Distributed Process Control is the industrial technology destined to become the key to plant-wide management and the factory of the future.This unique, in-depth report concentrates on the state-of-the-art in Distributed Process Control, a technology which nearly 200 companies supply to users in all areas of manufacturing from paper-making to aerospace.The report examines the three vital categories of DPC systems:* Computer Based * Digital Electronic * atching and Proportioning Control Plus* Manufacturing Cell Control Systems * Supervisory Control and Data Acquisition (SCADA) Systems * Factory Communications Distributed Process Control and Factory Communications will ensure that you stay ahead of the competition and exploit this exciting new technology to the full.

  • Fluid Dynamics Transactions

    • 1 Edición
    • W. Fiszdon
    • Inglés
    Fluid Dynamics Transactions, Volume 2 compiles 46 papers on fluid dynamics, a subdiscipline of fluid mechanics that deals with fluid flow. The topics discussed in this book include developments in interference theory for aeronautical applications; diffusion from sources in a turbulent boundary layer; unsteady motion of a finite wing span in a compressible medium; and wall pressure covariance and comparison with experiment. The certain classes of non-stationary axially symmetric flows in magneto–gas–dynamics... description of the phenomenon of secondary flows in curved channels by means of convection of rotation lines; and some variational problems of gas dynamics are also deliberated in this text. This publication is a good reference for physicists and students researching on the natural science of fluids in motion.

  • Microprocessor Engineering

    • 1 Edición
    • B. Holdsworth
    • Inglés
    Microprocessor Engineering provides an insight in the structures and operating techniques of a small computer. The book is comprised of 10 chapters that deal with the various aspects of computing. The first two chapters tackle the basic arithmetic and logic processes. The third chapter covers the various memory devices, both ROM and RWM. Next, the book deals with the general architecture of microprocessor. The succeeding three chapters discuss the software aspects of machine operation, while the last remaining three chapters talk about the relationship of the microprocessor with the outside world. The text will be of great use to undergraduate students of various disciplines. Practitioners of computer-related fields with no previous digital experience will find this book useful.

  • Protecting Personnel at Hazardous Waste Sites

    • 2 Edición
    • WILLIAM F. MARTIN
    • Inglés
    The second edition of this book brings together a wide range of occupational safety and health recommendations and practices directly applying to hazardous waste site clean ups. In addition to providing the most current information on maximumprotection for clean up personnel, this book is a practical authoritative guide for those involved in clean up operations. The completely updated second edition cites the newest OSHA and NIOSH recommendations which have developed over the past decade and explores the new federal emphasis in hazardous waste site clean ups as Radiation safety, Toxicology, Unexploded ordanance, OSHA training, EPA training and site health and safety plans.

  • Mechanical Behaviour of Materials V

    Proceedings of the Fifth International Conference, Beijing, China, 3-6 June 1987
    • 1 Edición
    • M. G. Yan + 2 más
    • Inglés
    Provides a thorough up-to-date account of the latest developments in materials science and engineering research and applications. The contributed papers cover all aspects of this important field, including material aspects of fracture in engineering practice, fatigue criteria and material characterisation, environmental effects on fracture, high temperature deformation and failure and mechanical properties and engineering applications of composite and non-metallic materials. Contains approximately 200 papers from acknowledged experts.

  • Safety in the Process Industries

    • 1 Edición
    • Ralph King
    • Inglés
    Safety in the Process Industries aims to ensure the safety of people involved in process plants, especially those who face its immediate hazards and dangers. The book is divided into four parts. Part I covers topics such as the history of process hazards and attitudes in health and safety; laws concerned with the health and safety in the process industry; and the definitions of different terms related to health and safety. Part II discusses the electrical, chemical, and physical hazards in the process industries, as well as the dangers of flammability and corrosion. Part III talks about hazard control design; protective instrumentation; and maintenance and inspection. Part IV tackles topics related to the management of health and safety in industry processes such as emergency planning; safety training; and protection the working environment. The text is recommended for people concerned in the management, development, planning, design, construction, operation, inspection and maintenance of process plants, as well as those who oversee its safety.

  • Engineering Sites

    • 1 Edición
    • Inglés
    Developments in Geotechnical Engineering, Vol. 14B: Rockslides and Avalanches, 2: Engineering Sites focuses on initiatives to offer a foundation for studies of mass movement phenomena in the Western Hemisphere. The selection first takes a look at the contributions of Josef Stini to engineering, geology, and slope movement investigations, the concept of Karl Terzhagi on rockslides, and the contributions of Laurits Bjerrum to the mechanics of rockslides. Concerns cover stability of hard rock slopes, influence of geological details, relation between slide process and remedial treatment, water pressure in pores and fractures, slope creep, rockslides, and avalanches, and early warning of an impending slide. The publication then examines rock slope movements with hydroelectric power projects in Mexico, Bighorn Reservoir slides in Montana, U.S.A., rock avalanche and wave at Chungar, Peru, and wedge rockslides in Libby Dam and Lake Koocanusa in Montana. The text examines Hogarth Pit slope failure in Ontario, Canada, pit slope performance in shale in Wyoming U.S.A., Twin Buttes pit slope failure in Arizona, U.S.A., and the Prime Mine slope failure in Arizona, U.S.A. Discussions focus on stability analyses, description of slope failures, cause of failure, remedial actions, geotechnical properties of tertiary shales, and subsequent slope performance. The selection is a valuable source of data for researchers interested in rockslides and avalanches.

  • Advances in the Theory of Plates and Shells

    • 1 Edición
    • Volumen 24
    • George Z. Voyiadjis + 1 más
    • Inglés
    Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.

  • Strength of Structural Elements

    • 1 Edición
    • Volumen 26
    • Zbigniew Brzoska
    • M. Zyczkowski
    • Inglés
    This volume describes engineering applications of the mechanics of deformable bodies and the elasticity theory relevant to them. It is concerned mainly with one-dimensional problems, which arise because either one of the dimensions of a body is much greater than the remaining two or the functions of two or three variables may be reduced to one variable.Problems of this type are of twofold importance. Firstly, many engineering problems can be described with sufficient accuracy just in this way. Secondly, unidimensional problems with known analytical solutions may serve either for testing numerical methods or for the analysis of fundamental concepts and phenomena, whose physical nature in three-dimensional approach might be obscured by the analytical-numerical aspect. The authors have confined themselves for the most part to the analysis of elastic behaviour of structures; however some attention is also given to elastic problems. A deterministic approach has been applied throughout the book. It will serve as a springboard for further work with stochastic approaches which are being increasingly used in engineering practice today.

  • Bibliography on the Fatigue of Materials, Components and Structures

    1961 - 1965
    • 1 Edición
    • J. Y. Mann
    • Inglés
    Bibliography on the Fatigue of Materials, Components and Structures, Volume 3 addresses the problems associated with fatigue loadings as evident in branches of engineering and technology. Such debilitating factor also affects the human skeletal system. The book provides several references that show an increasing focus being given to the problem of fatigue in materials, components, and structures. The journals and lists of references used in the book, which discuss the subject of fatigue, are chosen to give an initial identification of citations. These sources are accompanied by computer-based documentation systems. The bibliographical data for each citation are thoroughly reviewed by checking the original bases of publication. The references in the book are arranged chronologically according to its year of publication. Major use has been made of abbreviations for the titles of journals and publications. The book can serve as a valuable tool for doctors, therapists, students, and researchers in the field of medicine.

  • Marine Control, Practice

    • 1 Edición
    • D.A. Taylor
    • Inglés
    Marine Engineering Series: Marine Control Practice deals with the instrumentation and its associated control systems that are found onboard ships. The book covers topics such as the measuring instruments and control signals for different parameters; system analysis; process and kinetic control systems; and commercially available equipment. Also covered in the book are correcting units such as actuators and valves; the control systems for boilers, turbines, auxiliary equipment; and control involving computers. The text is recommended for those who need to complete the Certificates of Competency for Marine Engineers, including Extra First Class. The book will also be beneficial to offshore engineers.

  • Stress Analysis for Creep

    • 1 Edición
    • J.T. Boyle + 1 más
    • Inglés
    Stress Analysis for Creep focuses on methods on creep analysis. The book first ponders on the occurrence of creep in mechanical engineering components, including background to stress analysis for creep and general-purpose computer programs for creep analysis. The text presents a phenomenological description of creep. The phenomenon of creep, physical mechanisms of creep, convenient uniaxial constitutive relationships, and creep rupture are described. The book also explains simple component behavior, creep under multiaxial states of stress, and stress analysis for steady creep. The text focuses on reference stress methods in steady creep. Reference stresses for combined loading with a power law; non-isothermal power-law creep; reference temperatures; and approximate reference stress methods are elaborated. The text also focuses on stress analysis for transient creep; approximate solution of transient creep problems; and creep buckling and rupture. The text highlights the design for creep, including material data requirements and constitutive modeling for design; verification and qualification of stress analysis; and design methodology. The book is a good source of data for readers wanting to study creep analysis.

  • Distributed Parameter Control Systems

    Theory and Application
    • 1 Edición
    • Spyros G. Tzafestas
    • Inglés
    Distributed Parameter Control Systems: Theory and Application is a two-part book consisting of 10 theoretical and five application-oriented chapters contributed by well-known workers in the distributed-paramete... systems. The book covers topics of distributed parameter control systems in the areas of simulation, identification, state estimation, stability, control (optimal, stochastic, and coordinated), numerical approximation methods, optimal sensor, and actuator positioning. Five applications works include chemical reactors, heat exchangers, petroleum reservoirs/aquifers, and nuclear reactors. The text will be a useful reference for both graduate students and professional researchers working in the field.

  • Stability of Structures by Finite Element Methods

    • 1 Edición
    • Volumen 40
    • Z. Waszczyszyn + 2 más
    • Inglés
    This book is the consequence of research undertaken by the authors in the field of advanced problems of structural mechanics. Stability analysis of structures comes under this area because of the complex models and computational methods needed for analysis. In the mid seventies, a joint effort began between a group of researchers and teachers of the Department of Civil Engineering and Computer Center of the Cracow University of Technology. One of the important results of the collaboration has been this publication.

  • Classical and Modern Control with Worked Examples

    Pergamon International Library of Science, Technology, Engineering and Social Studies: International Series on Systems and Control, Volume 2
    • 1 Edición
    • Jean-Pierre Elloy + 1 más
    • M G Singh + 2 más
    • Inglés
    Classical and Modern Control with Worked Examples contains problems in automatic control, with emphasis on continuous time systems. The book contains exercises that increase in difficulty. The text is organized into three parts, with each of the three parts divided into two chapters. The first chapter of each part consists of a course abstract; the second chapter contains the exercises relevant to the course in question. The first and second parts are devoted to linear and non-linear servo-systems. The third part introduces representation in the form of equations of state of linear systems. The book will be useful to students, technicians, and qualified engineers who wish to acquaint themselves in a practical way with both the traditional and the modern principles of automatic control, and with their application to industrial processes of all kinds.

  • Stability in Viscoelasticity

    • 1 Edición
    • Volumen 38
    • A.D. Drozdov + 1 más
    • J. D. Achenbach
    • Inglés
    The subject of stability problems for viscoelastic solids and elements of structures, with which this book is concerned, has been the focus of attention in the past three decades. This has been due to the wide inculcation of viscoelastic materials, especially polymers and plastics, in industry. Up-to-date studies in viscoelasticity are published partially in purely mathematical journals, partially in merely applied ones, and as a consequence, they remain unknown to many interested specialists. Stability in Viscoelasticity fills the gap between engineers and mathematicians and converges theoretical and applied directions of investigations.All chapters contain extensive bibliographies of both purely mathematical and engineering works on stability problems. The bibliography includes a number of works in Russian which are practically inaccessible to the Western reader.

  • Microprocessors

    Epo Applied Technology Series
    • 1 Edición
    • O. A. R. Cornillie
    • Inglés
    Microprocessors presents an overview of the state of the art in the field of microprocessors and illustrates, with the aid of patents, its utilization and application. Organized into six parts, the book begins with an introduction to the microprocessor, microcomputer, and software. Parts I-III focus on program control, digital control, and electrical motor control. Subsequent parts show the medical applications, measuring instruments, and treatment of data in microprocessors.

  • Circulating Fluidized Bed Boilers

    Design and Operations
    • 1 Edición
    • Prabir Basu
    • Inglés
    This book provides practicing engineers and students with insight into the design and operation of circulating fluidized bed (CFB) boilers. Through a combination of theoretical concepts and practical experience, this book gives the reader a basic understanding of the many aspects of this subject.Important environmental considerations, including solid waste disposal and predicted emissions, are addressed individually in separate chapters. This book places an emphasis on combustion, hydrodynamics, heat transfer, and material issues, and illustrates these concepts with numerous examples of present applications and past experience. This book also examines the relevance of design and feed-stock parameters to the operation of a CFB boiler; designs of mechanical components, including cyclones, air distributor grids, and solid recycle systems; and special problems CVB boilers present with construction materials.

  • Introduction to Marine Engineering

    • 1 Edición
    • D. A. Taylor
    • Inglés
    Introduction to Marine Engineering discusses machineries and related equipment in ships. The book first gives an introduction to the kinds of ships and their machineries. The manuscript also discusses diesel engines. Gas exchange process; power measurement; compositions of two-stroke and four-stroke cycle diesel engines; starting air system; turning gear; and common marine diesel engines are described. The text also highlights steam turbines and boilers. Turbine construction, gearing, boiler arrangements, boiler operation, and coal-fired boilers are discussed. The book also looks at feed systems, pumps and pumping systems, fuel and lubricating oils and their treatment, air conditioning, ventilation, and refrigeration. The text also describes deck machinery and hull equipment. Hydraulic systems, electrical operation, anchor and cargo handling equipment, hatch covers, bow thruster, and safety equipment are considered. The book also discusses shafting and propellers, steering gear, firefighting equipment and strategy, and safe working practices. The text further looks at electrical equipment in ships. Alternating current motors and generators, direct current generators, navigation lights, batteries, and emergency generator supply are discussed. The book is a vital source of information for those interested in marine engineering.

  • Instrument Technology

    Measurement of Pressure, Level, Flow and Temperature
    • 3 Edición
    • E. B. Jones
    • Inglés
    Instrument Technology, Volume 1 focuses on the instruments used in the measurement, recording, and control of critical variables in industrial processes. More specifically, measurements of pressure, liquid level in a tank or vessel, flow, and temperature are discussed. Instruments are classified according to the physical principle upon which they are based. The discussion begins by introducing the reader to the system of units of measurement used throughout the text. This topic is followed by four chapters, each dealing largely with the mathematics and physics of the instruments, which are classified according to the decimal system. The first chapter describes the principles on which the measurement of pressure and the transmission of force by a fluid depend. Before considering the actual methods of measuring pressure, the book first explains the difference between absolute and differential pressure. The second chapter discusses how the level of liquid in a tank or vessel is measured using direct methods and pressure-operated types. The third chapter focuses on the measurement of flow using quantity meters and rate-of-flow meters. The final chapter is concerned with temperatures measured on different thermometers and the two fixed points used to compare such measurements: the lower fixed point (ice-point) and the upper fixed point (steam-point). This book is intended for instrument and chemical engineers, as well as for students studying both craftsmen and technician courses.

  • Transport Processes in Chemically Reacting Flow Systems

    Butterworths Series in Chemical Engineering
    • 1 Edición
    • Daniel E. Rosner
    • Howard Brenner
    • Inglés
    Transport Processes in Chemically Reacting Flow Systems discusses the role, in chemically reacting flow systems, of transport processes—particular... the transport of momentum, energy, and (chemical species) mass in fluids (gases and liquids). The principles developed and often illustrated here for combustion systems are important not only for the rational design and development of engineering equipment (e.g., chemical reactors, heat exchangers, mass exchangers) but also for scientific research involving coupled transport processes and chemical reaction in flow systems. The book begins with an introduction to transport processes in chemically reactive systems. Separate chapters cover momentum, energy, and mass transport. These chapters develop, state, and exploit useful quantitative ""analogies"" between these transport phenomena, including interrelationships that remain valid even in the presence of homogeneous or heterogeneous chemical reactions. A separate chapter covers the use of transport theory in the systematization and generalization of experimental data on chemically reacting systems. The principles and methods discussed are then applied to the preliminary design of a heat exchanger for extracting power from the products of combustion in a stationary (fossil-fuel-fired) power plant. The book has been written in such a way as to be accessible to students and practicing scientists whose background has until now been confined to physical chemistry, classical physics, and/or applied mathematics.

  • Progress in Heat and Mass Transfer

    Selected Papers of the 1970 International Seminar
    • 1 Edición
    • W. R. Schowalter + 2 más
    • Inglés
    Progress in Heat and Mass Transfer, Volume 5: Heat and Mass Transfer in Rheologically Complex Fluids compiles selected papers presented at the International Seminar held in Herceg Novi, Yugoslavia on September 8-12, 1970. This book discusses the continuum foundation of rheology; transport phenomena in turbulent flow of rheologically complex fluids; and heat-transfer effects in flowing polymers. The thixotropic effects in viscoelastic media; non-equilibrium thermodynamics and rheology of viscoelastic fluids; and flow instability due to convective time changes of consistency are also elaborated. This publication also covers the prediction method for turbulent momentum and heat transfer in viscous non-Newtonian liquids; methods for determining thermal properties of anisotropic systems; and convection in ferromagnetic fluid due to magneto caloric effect. This volume is beneficial to students and researchers interested in the heat and mass transfer in rheologically complex fluids.

  • Environmental Impact of Nuclear Power Plants

    Proceedings of a Conference Held November 26-30, 1974, Sponsored by the School of Nuclear Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 USA
    • 1 Edición
    • R. A. Karam + 1 más
    • Inglés
    Environmental Impact of Nuclear Power Plants contains the proceedings of a conference held in Atlanta, Georgia, on November 26-30, 1974 and sponsored by the Georgia Institute of Technology's School of Nuclear Engineering. The papers focus on the environmental impact of nuclear power plants and are organized into six parts: plant site selection; ecosystems and ecological effects; radioactive waste and thermal pollution; standards and guidelines in the preparation of environmental reports; cost-benefit analysis; environmental impact studies of various power sources. Comprised of 23 chapters, this book begins with an assessment of siting considerations for nuclear power plants from a government perspective. The instrument used by Florida Power & Light in evaluating a power plant site is described, along with an ecosystem approach to atomic energy development. The discussion then turns to impact assessment for nuclear power plants and its implications for ecological and environmental sciences; radioactive waste systems and radioactive effluents; engineering aspects of heat dissipation in water bodies; and transportation of nuclear materials. Subsequent chapters deal with recommendations, standards, and regulations concerning the preparation of environmental reports for nuclear power plants; cost-benefit analysis in nuclear power plant licensing actions; and radioactive waste discharges at nuclear power plants. This monograph will be of interest to nuclear engineers and environmental policymakers.

  • Vibrations and Waves

    Part B: Waves
    • 1 Edición
    • Volumen 30
    • S. Kaliski
    • L. Solarz
    • Inglés
    This book gives a comprehensive overview of wave phenomena in different media with interacting mechanical, electromagnetic and other fields. Equations describing wave propagation in linear and non-linear elastic media are followed by equations of rheological models, models with internal rotational degrees of freedom and non-local interactions. Equations for coupled fields: thermal, elastic, electromagnetic, piezoelectric, and magneto-spin with adequate boundary conditions are also included. Together with its companion volume Vibrations and Waves. Part A: Vibrations this work provides a wealth of information about dynamical phenomena in different media and fields, which will be of considerable interest to both scientists and graduate students.

  • Convex Models of Uncertainty in Applied Mechanics

    • 1 Edición
    • Volumen 25
    • Y. Ben-Haim + 1 más
    • Inglés
    Recognition of the need to introduce the ideas of uncertainty in a wide variety of scientific fields today reflects in part some of the profound changes in science and engineering over the last decades. Nobody questions the ever-present need for a solid foundation in applied mechanics. Neither does anyone question nowadays the fundamental necessity to recognize that uncertainty exists, to learn to evaluate it rationally, and to incorporate it into design.This volume provides a timely and stimulating overview of the analysis of uncertainty in applied mechanics. It is not just one more rendition of the traditional treatment of the subject, nor is it intended to supplement existing structural engineering books. Its aim is to fill a gap in the existing professional literature by concentrating on the non-probabilistic model of uncertainty. It provides an alternative avenue for the analysis of uncertainty when only a limited amount of information is available. The first chapter briefly reviews probabilistic methods and discusses the sensitivity of the probability of failure to uncertain knowledge of the system. Chapter two discusses the mathematical background of convex modelling. In the remainder of the book, convex modelling is applied to various linear and nonlinear problems. Uncertain phenomena are represented throughout the book by convex sets, and this approach is referred to as convex modelling.This book is intended to inspire researchers in their goal towards further growth and development in this field.

Temas relacionados